From: Christophe Leroy Date: Wed, 21 Nov 2018 08:51:57 +0000 (+0000) Subject: spi, mpc8xx: migrate to DM_SPI X-Git-Tag: v2019.01-rc1~11^2 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=fb0204e48b3e5ed5ecdfab89229140b6d4a1a08b;p=oweals%2Fu-boot.git spi, mpc8xx: migrate to DM_SPI Signed-off-by: Christophe Leroy --- diff --git a/drivers/spi/mpc8xx_spi.c b/drivers/spi/mpc8xx_spi.c index 285fd4d2cc..b020ce2b9d 100644 --- a/drivers/spi/mpc8xx_spi.c +++ b/drivers/spi/mpc8xx_spi.c @@ -17,64 +17,19 @@ */ #include +#include #include +#include + #include -#include -#include -#include -#include - -#define SPI_EEPROM_WREN 0x06 -#define SPI_EEPROM_RDSR 0x05 -#define SPI_EEPROM_READ 0x03 -#define SPI_EEPROM_WRITE 0x02 - -/* --------------------------------------------------------------- - * Offset for initial SPI buffers in DPRAM: - * We need a 520 byte scratch DPRAM area to use at an early stage. - * It is used between the two initialization calls (spi_init_f() - * and spi_init_r()). - * The value 0xb00 makes it far enough from the start of the data - * area (as well as from the stack pointer). - * --------------------------------------------------------------- */ -#ifndef CONFIG_SYS_SPI_INIT_OFFSET -#define CONFIG_SYS_SPI_INIT_OFFSET 0xB00 -#endif +#include #define CPM_SPI_BASE_RX CPM_SPI_BASE #define CPM_SPI_BASE_TX (CPM_SPI_BASE + sizeof(cbd_t)) -/* ------------------- - * Function prototypes - * ------------------- */ -ssize_t spi_xfer(size_t); - -/* ------------------- - * Variables - * ------------------- */ - #define MAX_BUFFER 0x104 -/* ---------------------------------------------------------------------- - * Initially we place the RX and TX buffers at a fixed location in DPRAM! - * ---------------------------------------------------------------------- */ -static uchar *rxbuf = - (uchar *)&((cpm8xx_t *)&((immap_t *)CONFIG_SYS_IMMR)->im_cpm)->cp_dpmem - [CONFIG_SYS_SPI_INIT_OFFSET]; -static uchar *txbuf = - (uchar *)&((cpm8xx_t *)&((immap_t *)CONFIG_SYS_IMMR)->im_cpm)->cp_dpmem - [CONFIG_SYS_SPI_INIT_OFFSET+MAX_BUFFER]; - -/* ************************************************************************** - * - * Function: spi_init_f - * - * Description: Init SPI-Controller (ROM part) - * - * return: --- - * - * *********************************************************************** */ -void spi_init_f(void) +static int mpc8xx_spi_probe(struct udevice *dev) { immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR; cpm8xx_t __iomem *cp = &immr->im_cpm; @@ -180,117 +135,24 @@ void spi_init_f(void) clrbits_be16(&tbdf->cbd_sc, BD_SC_READY); clrbits_be16(&rbdf->cbd_sc, BD_SC_EMPTY); - /* Set the bd's rx and tx buffer address pointers */ - out_be32(&rbdf->cbd_bufaddr, (ulong)rxbuf); - out_be32(&tbdf->cbd_bufaddr, (ulong)txbuf); - /* 10 + 11 */ out_8(&cp->cp_spim, 0); /* Mask all SPI events */ out_8(&cp->cp_spie, SPI_EMASK); /* Clear all SPI events */ - return; + return 0; } -/* ************************************************************************** - * - * Function: spi_init_r - * - * Description: Init SPI-Controller (RAM part) - - * The malloc engine is ready and we can move our buffers to - * normal RAM - * - * return: --- - * - * *********************************************************************** */ -void spi_init_r(void) +static int mpc8xx_spi_xfer(struct udevice *dev, unsigned int bitlen, + const void *dout, void *din, unsigned long flags) { immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR; cpm8xx_t __iomem *cp = &immr->im_cpm; - spi_t __iomem *spi = (spi_t __iomem *)&cp->cp_dparam[PROFF_SPI]; - cbd_t __iomem *tbdf, *rbdf; - - /* Disable relocation */ - out_be16(&spi->spi_rpbase, 0); - - /* tx and rx buffer descriptors */ - tbdf = (cbd_t __iomem *)&cp->cp_dpmem[CPM_SPI_BASE_TX]; - rbdf = (cbd_t __iomem *)&cp->cp_dpmem[CPM_SPI_BASE_RX]; - - /* Allocate memory for RX and TX buffers */ - rxbuf = (uchar *)malloc(MAX_BUFFER); - txbuf = (uchar *)malloc(MAX_BUFFER); - - out_be32(&rbdf->cbd_bufaddr, (ulong)rxbuf); - out_be32(&tbdf->cbd_bufaddr, (ulong)txbuf); - - return; -} - -/**************************************************************************** - * Function: spi_write - **************************************************************************** */ -ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len) -{ - int i; - - memset(rxbuf, 0, MAX_BUFFER); - memset(txbuf, 0, MAX_BUFFER); - *txbuf = SPI_EEPROM_WREN; /* write enable */ - spi_xfer(1); - memcpy(txbuf, addr, alen); - *txbuf = SPI_EEPROM_WRITE; /* WRITE memory array */ - memcpy(alen + txbuf, buffer, len); - spi_xfer(alen + len); - /* ignore received data */ - for (i = 0; i < 1000; i++) { - *txbuf = SPI_EEPROM_RDSR; /* read status */ - txbuf[1] = 0; - spi_xfer(2); - if (!(rxbuf[1] & 1)) - break; - udelay(1000); - } - if (i >= 1000) - printf("*** spi_write: Time out while writing!\n"); - - return len; -} - -/**************************************************************************** - * Function: spi_read - **************************************************************************** */ -ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len) -{ - memset(rxbuf, 0, MAX_BUFFER); - memset(txbuf, 0, MAX_BUFFER); - memcpy(txbuf, addr, alen); - *txbuf = SPI_EEPROM_READ; /* READ memory array */ - - /* - * There is a bug in 860T (?) that cuts the last byte of input - * if we're reading into DPRAM. The solution we choose here is - * to always read len+1 bytes (we have one extra byte at the - * end of the buffer). - */ - spi_xfer(alen + len + 1); - memcpy(buffer, alen + rxbuf, len); - - return len; -} - -/**************************************************************************** - * Function: spi_xfer - **************************************************************************** */ -ssize_t spi_xfer(size_t count) -{ - immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR; - cpm8xx_t __iomem *cp = &immr->im_cpm; - spi_t __iomem *spi = (spi_t __iomem *)&cp->cp_dparam[PROFF_SPI]; cbd_t __iomem *tbdf, *rbdf; int tm; + size_t count = (bitlen + 7) / 8; - /* Disable relocation */ - out_be16(&spi->spi_rpbase, 0); + if (count > MAX_BUFFER) + return -EINVAL; tbdf = (cbd_t __iomem *)&cp->cp_dpmem[CPM_SPI_BASE_TX]; rbdf = (cbd_t __iomem *)&cp->cp_dpmem[CPM_SPI_BASE_RX]; @@ -299,10 +161,12 @@ ssize_t spi_xfer(size_t count) clrbits_be32(&cp->cp_pbdat, 0x0001); /* Setting tx bd status and data length */ + out_be32(&tbdf->cbd_bufaddr, (ulong)dout); out_be16(&tbdf->cbd_sc, BD_SC_READY | BD_SC_LAST | BD_SC_WRAP); out_be16(&tbdf->cbd_datlen, count); /* Setting rx bd status and data length */ + out_be32(&rbdf->cbd_bufaddr, (ulong)din); out_be16(&rbdf->cbd_sc, BD_SC_EMPTY | BD_SC_WRAP); out_be16(&rbdf->cbd_datlen, 0); /* rx length has no significance */ @@ -333,3 +197,20 @@ ssize_t spi_xfer(size_t count) return count; } + +static const struct dm_spi_ops mpc8xx_spi_ops = { + .xfer = mpc8xx_spi_xfer, +}; + +static const struct udevice_id mpc8xx_spi_ids[] = { + { .compatible = "fsl,mpc8xx-spi" }, + { } +}; + +U_BOOT_DRIVER(mpc8xx_spi) = { + .name = "mpc8xx_spi", + .id = UCLASS_SPI, + .of_match = mpc8xx_spi_ids, + .ops = &mpc8xx_spi_ops, + .probe = mpc8xx_spi_probe, +};