From: Anthony Sepa Date: Sun, 19 Feb 2017 18:27:36 +0000 (-0400) Subject: brcm63xx: add support for the Actiontec R1000H gateway X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=f9b67b89d31dbffd20aedcb33cf10dfe1a206aab;p=librecmc%2Flibrecmc.git brcm63xx: add support for the Actiontec R1000H gateway SOC: Broadcom BCM6368 (2 * Broadcom BMIPS4350 V3.1 / 400 MHz) Flash size: 32MB (split 16/16 dual boot) RAM size: 64MB Wireless: BCM432x 802.11a/b/g/n(pci) Ethernet: Broadcom BCM53115 USB: 1 x USB 2.0 Known issues: - Unable to detect 53115 switch attached to MDIO. Not supported - No support for the cable port More info on the device and the research can be found at: http://www.actiontec.com/212.html Same FCC ID as: https://wikidevi.com/wiki/Actiontec_V1000H_(Telus) Signed-off-by: Anthony Sepa [jonas.gorski: fix commit subject/message] Signed-off-by: Jonas Gorski --- diff --git a/target/linux/brcm63xx/base-files/etc/board.d/01_leds b/target/linux/brcm63xx/base-files/etc/board.d/01_leds index 61f685e675..7651650d3f 100755 --- a/target/linux/brcm63xx/base-files/etc/board.d/01_leds +++ b/target/linux/brcm63xx/base-files/etc/board.d/01_leds @@ -69,6 +69,9 @@ livebox1) ucidef_set_led_netdev "wan" "WAN" "Livebox1:red:adsl" "eth1" ucidef_set_led_netdev "wlan0" "WIFI" "Livebox1:red:wifi" "wlan0" ;; +r1000h) + ucidef_set_led_usbport "usb" "USB" "R1000H:green:usb" "usb1-port1" "usb2-port1" + ;; r5010un_v2) ucidef_set_led_usbdev "usb" "USB" "R5010UNv2:green:usb" "1-1" ;; diff --git a/target/linux/brcm63xx/base-files/etc/board.d/02_network b/target/linux/brcm63xx/base-files/etc/board.d/02_network index f703dfd3f8..6a20fcedde 100755 --- a/target/linux/brcm63xx/base-files/etc/board.d/02_network +++ b/target/linux/brcm63xx/base-files/etc/board.d/02_network @@ -12,6 +12,7 @@ case "$(brcm63xx_board_name)" in cvg834g |\ evg2000 |\ +r1000h |\ rta770bw |\ rta770w |\ spw303v |\ diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh b/target/linux/brcm63xx/base-files/etc/diag.sh index e8e8624cdc..b90b5907aa 100644 --- a/target/linux/brcm63xx/base-files/etc/diag.sh +++ b/target/linux/brcm63xx/base-files/etc/diag.sh @@ -114,6 +114,9 @@ set_state() { p870hw-51a_v2) status_led="P870HW-51a:green:power" ;; + r1000h) + status_led="R1000H:green:power" + ;; r5010un_v2) status_led="R5010UNv2:green:power" ;; diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc b/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc index 650db9da60..57bf6e2a46 100644 --- a/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc +++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc @@ -25,6 +25,7 @@ case "$(brcm63xx_board_name)" in hg622 |\ magic |\ p870hw-51a_v2 |\ + r1000h |\ r5010un_v2 |\ rta770bw |\ rta770w |\ diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh index 4fe33eb41a..0dc87d0fd0 100755 --- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh +++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh @@ -21,6 +21,9 @@ brcm63xx_dt_detect() { "ADB P.DG AV4202N") board_name="av4202n" ;; + "Actiontec R1000H") + board_name="r1000h" + ;; "Alcatel RG100A") board_name="rg100a" ;; diff --git a/target/linux/brcm63xx/dts/r1000h.dts b/target/linux/brcm63xx/dts/r1000h.dts new file mode 100644 index 0000000000..37cfa15dad --- /dev/null +++ b/target/linux/brcm63xx/dts/r1000h.dts @@ -0,0 +1,93 @@ +/dts-v1/; + +#include "bcm6368.dtsi" + +#include + +/ { + model = "Actiontec R1000H"; + compatible = "actiontec,r1000h", "brcm,bcm6368"; + + chosen { + bootargs = "root=/dev/mtdblock2 rootfstype=squashfs noinitrd console=ttyS0,115200"; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + debounce-interval = <60>; + + reset { + label = "reset"; + gpios = <&pinctrl 34 1>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&pinctrl 35 1>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + inet_green { + label = "R1000H:green:inet"; + gpios = <&pinctrl 5 0>; + }; + + usb_green { + label = "R1000H:green:usb"; + gpios = <&pinctrl 21 1>; + }; + + power_green { + label = "R1000H:green:power"; + gpios = <&pinctrl 22 0>; + default-state = "on"; + }; + + wps_green { + label = "R1000H:green:wps"; + gpios = <&pinctrl 23 1>; + }; + + power_red { + label = "R1000H:red:power"; + gpios = <&pinctrl 24 0>; + }; + + wps_red { + label = "R1000H:red:wps"; + gpios = <&pinctrl 30 1>; + }; + + inet_red { + label = "R1000H:red:inet"; + gpios = <&pinctrl 31 0>; + }; + }; +}; + +&pflash { + status = "ok"; + + linux,part-probe = "bcm63xxpart"; + + CFE@0 { + reg = <0x000000 0x020000>; + read-only; + }; + + linux@20000 { + reg = <0x020000 0x1fc0000>; + }; + + nvram@1fe0000 { + reg = <0x1fe0000 0x20000>; + }; +}; diff --git a/target/linux/brcm63xx/image/bcm63xx.mk b/target/linux/brcm63xx/image/bcm63xx.mk index 04cbf124a7..dd1ad86501 100644 --- a/target/linux/brcm63xx/image/bcm63xx.mk +++ b/target/linux/brcm63xx/image/bcm63xx.mk @@ -1,3 +1,4 @@ + # # BCM33XX/BCM63XX Profiles # @@ -174,6 +175,21 @@ define Device/96368MVWG-generic endef TARGET_DEVICES += 96368MVWG-generic +### Actiontec ### +define Device/R1000H + $(Device/bcm63xx) + FILESYSTEMS := squashfs + DEVICE_TITLE := Actiontec R1000H + DEVICE_DTS := r1000h + CFE_BOARD_ID := 96368MVWG + CFE_CHIP_ID := 6368 + FLASH_MB := 32 + IMAGE_OFFSET := 0x20000 + DEVICE_PACKAGES := \ + $(USB2_PACKAGES) $(BRCMWL_PACKAGES) +endef +TARGET_DEVICES += R1000H + ### ADB ### define Device/A4001N $(Device/bcm63xx) diff --git a/target/linux/brcm63xx/patches-4.4/578-board_R1000H.patch b/target/linux/brcm63xx/patches-4.4/578-board_R1000H.patch new file mode 100644 index 0000000000..d1a1b03631 --- /dev/null +++ b/target/linux/brcm63xx/patches-4.4/578-board_R1000H.patch @@ -0,0 +1,50 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -2193,6 +2193,31 @@ static struct board_info __initdata boar + }, + }; + ++static struct board_info __initdata board_R1000H = { ++ .name = "R1000H", ++ .expected_cpu_id = 0x6368, ++ ++ .has_uart0 = 1, ++ .has_uart1 = 1, ++ .has_pci = 1, ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ ++ .has_enetsw = 1, ++ .enetsw = { ++ .used_ports = { ++ [5] = { ++ .used = 1, ++ .phy_id = 0xff, ++ .bypass_link = 1, ++ .force_speed = 1000, ++ .force_duplex_full = 1, ++ .name = "RGMII", ++ }, ++ }, ++ }, ++}; ++ + static struct board_info __initdata board_VR3025u = { + .name = "96368M-1541N", + .expected_cpu_id = 0x6368, +@@ -2674,6 +2699,7 @@ static const struct board_info __initcon + &board_HG622, + &board_HG655b, + &board_P870HW51A_V2, ++ &board_R1000H, + &board_VH4032N, + &board_VR3025u, + &board_VR3025un, +@@ -2775,6 +2801,7 @@ static struct of_device_id const bcm963x + { .compatible = "sfr,nb6-ser-r0", .data = &board_nb6, }, + #endif + #ifdef CONFIG_BCM63XX_CPU_6368 ++ { .compatible = "actiontec,r1000h", .data = &board_R1000H, }, + { .compatible = "adb,av4202n", .data = &board_AV4202N, }, + { .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, }, + { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },