From: Mike Frysinger Date: Thu, 12 Nov 2009 23:42:53 +0000 (-0500) Subject: Blackfin: use new bfin read/write mmr helper funcs X-Git-Tag: v2010.03-rc1~152^2~18 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=f948158f72e6b880d02e4fa549362e4dc285eb1c;p=oweals%2Fu-boot.git Blackfin: use new bfin read/write mmr helper funcs Signed-off-by: Mike Frysinger --- diff --git a/cpu/blackfin/initcode.c b/cpu/blackfin/initcode.c index ed43f850de..5f80ad615e 100644 --- a/cpu/blackfin/initcode.c +++ b/cpu/blackfin/initcode.c @@ -34,7 +34,7 @@ static inline void serial_init(void) size_t i; /* force RTS rather than relying on auto RTS */ - bfin_write_UART1_MCR(bfin_read_UART1_MCR() | FCPOL); + bfin_write16(&pUART->mcr, bfin_read16(&pUART->mcr) | FCPOL); /* Wait for the line to clear up. We cannot rely on UART * registers as none of them reflect the status of the RSR. @@ -64,7 +64,7 @@ static inline void serial_init(void) #endif if (BFIN_DEBUG_EARLY_SERIAL) { - int ucen = *pUART_GCTL & UCEN; + int ucen = bfin_read16(&pUART->gctl) & UCEN; serial_early_init(); /* If the UART is off, that means we need to program @@ -81,7 +81,7 @@ static inline void serial_deinit(void) #ifdef __ADSPBF54x__ if (BFIN_UART_USE_RTS && CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) { /* clear forced RTS rather than relying on auto RTS */ - bfin_write_UART1_MCR(bfin_read_UART1_MCR() & ~FCPOL); + bfin_write16(&pUART->mcr, bfin_read16(&pUART->mcr) & ~FCPOL); } #endif } @@ -95,9 +95,9 @@ static inline void serial_putc(char c) if (c == '\n') serial_putc('\r'); - *pUART_THR = c; + bfin_write16(&pUART->thr, c); - while (!(*pUART_LSR & TEMT)) + while (!(bfin_read16(&pUART->lsr) & TEMT)) continue; } diff --git a/cpu/blackfin/interrupts.c b/cpu/blackfin/interrupts.c index 921bfe0c0f..54a67b4971 100644 --- a/cpu/blackfin/interrupts.c +++ b/cpu/blackfin/interrupts.c @@ -97,12 +97,12 @@ void __udelay(unsigned long usec) #define MAX_TIM_LOAD 0xFFFFFFFF int timer_init(void) { - *pTCNTL = 0x1; + bfin_write_TCNTL(0x1); CSYNC(); - *pTSCALE = 0x0; - *pTCOUNT = MAX_TIM_LOAD; - *pTPERIOD = MAX_TIM_LOAD; - *pTCNTL = 0x7; + bfin_write_TSCALE(0x0); + bfin_write_TCOUNT(MAX_TIM_LOAD); + bfin_write_TPERIOD(MAX_TIM_LOAD); + bfin_write_TCNTL(0x7); CSYNC(); timestamp = 0; @@ -130,7 +130,7 @@ ulong get_timer(ulong base) ulong milisec; /* Number of clocks elapsed */ - ulong clocks = (MAX_TIM_LOAD - (*pTCOUNT)); + ulong clocks = (MAX_TIM_LOAD - bfin_read_TCOUNT()); /* * Find if the TCOUNT is reset diff --git a/cpu/blackfin/serial.c b/cpu/blackfin/serial.c index 2abda186ec..901cb97a1c 100644 --- a/cpu/blackfin/serial.c +++ b/cpu/blackfin/serial.c @@ -44,10 +44,6 @@ #ifdef CONFIG_UART_CONSOLE -#if defined(UART_LSR) && (CONFIG_UART_CONSOLE != 0) -# error CONFIG_UART_CONSOLE must be 0 on parts with only one UART -#endif - #include "serial.h" #ifdef CONFIG_DEBUG_SERIAL @@ -63,7 +59,7 @@ size_t cache_count; static uint16_t uart_lsr_save; static uint16_t uart_lsr_read(void) { - uint16_t lsr = *pUART_LSR; + uint16_t lsr = bfin_read16(&pUART->lsr); uart_lsr_save |= (lsr & (OE|PE|FE|BI)); return lsr | uart_lsr_save; } @@ -71,15 +67,21 @@ static uint16_t uart_lsr_read(void) static void uart_lsr_clear(void) { uart_lsr_save = 0; - *pUART_LSR |= -1; + bfin_write16(&pUART->lsr, bfin_read16(&pUART->lsr) | -1); } #else /* When debugging is disabled, we only care about the DR bit, so if other * bits get set/cleared, we don't really care since we don't read them * anyways (and thus anomaly 05000099 is irrelevant). */ -static inline uint16_t uart_lsr_read(void) { return *pUART_LSR; } -static inline void uart_lsr_clear(void) { *pUART_LSR = -1; } +static uint16_t uart_lsr_read(void) +{ + return bfin_read16(&pUART->lsr); +} +static void uart_lsr_clear(void) +{ + bfin_write16(&pUART->lsr, bfin_read16(&pUART->lsr) | -1); +} #endif /* Symbol for our assembly to call. */ @@ -130,7 +132,7 @@ void serial_putc(const char c) continue; /* queue the character for transmission */ - *pUART_THR = c; + bfin_write16(&pUART->thr, c); SSYNC(); WATCHDOG_RESET(); @@ -151,7 +153,7 @@ int serial_getc(void) continue; /* grab the new byte */ - uart_rbr_val = *pUART_RBR; + uart_rbr_val = bfin_read16(&pUART->rbr); #ifdef CONFIG_DEBUG_SERIAL /* grab & clear the LSR */ @@ -165,8 +167,8 @@ int serial_getc(void) uint16_t dll, dlh; printf("\n[SERIAL ERROR]\n"); ACCESS_LATCH(); - dll = *pUART_DLL; - dlh = *pUART_DLH; + dll = bfin_read16(&pUART->dll); + dlh = bfin_read16(&pUART->dlh); ACCESS_PORT_IER(); printf("\tDLL=0x%x DLH=0x%x\n", dll, dlh); do { diff --git a/cpu/blackfin/serial.h b/cpu/blackfin/serial.h index 6cbc564b53..5f9be8622d 100644 --- a/cpu/blackfin/serial.h +++ b/cpu/blackfin/serial.h @@ -24,71 +24,80 @@ # define BFIN_DEBUG_EARLY_SERIAL 0 #endif +#ifndef __ASSEMBLY__ + #define LOB(x) ((x) & 0xFF) #define HIB(x) (((x) >> 8) & 0xFF) +/* + * All Blackfin system MMRs are padded to 32bits even if the register + * itself is only 16bits. So use a helper macro to streamline this. + */ +#define __BFP(m) u16 m; u16 __pad_##m +struct bfin_mmr_serial { +#ifdef __ADSPBF54x__ + __BFP(dll); + __BFP(dlh); + __BFP(gctl); + __BFP(lcr); + __BFP(mcr); + __BFP(lsr); + __BFP(msr); + __BFP(scr); + __BFP(ier_set); + __BFP(ier_clear); + __BFP(thr); + __BFP(rbr); +#else + union { + u16 dll; + u16 thr; + const u16 rbr; + }; + const u16 __spad0; + union { + u16 dlh; + u16 ier; + }; + const u16 __spad1; + const __BFP(iir); + __BFP(lcr); + __BFP(mcr); + __BFP(lsr); + __BFP(msr); + __BFP(scr); + const u32 __spad2; + __BFP(gctl); +#endif +}; +#undef __BFP + #ifndef UART_LSR # if (CONFIG_UART_CONSOLE == 3) -# define pUART_DLH pUART3_DLH -# define pUART_DLL pUART3_DLL -# define pUART_GCTL pUART3_GCTL -# define pUART_IER pUART3_IER -# define pUART_IERC pUART3_IER_CLEAR -# define pUART_LCR pUART3_LCR -# define pUART_LSR pUART3_LSR -# define pUART_RBR pUART3_RBR -# define pUART_THR pUART3_THR -# define UART_THR UART3_THR -# define UART_LSR UART3_LSR +# define UART_BASE UART3_DLL # elif (CONFIG_UART_CONSOLE == 2) -# define pUART_DLH pUART2_DLH -# define pUART_DLL pUART2_DLL -# define pUART_GCTL pUART2_GCTL -# define pUART_IER pUART2_IER -# define pUART_IERC pUART2_IER_CLEAR -# define pUART_LCR pUART2_LCR -# define pUART_LSR pUART2_LSR -# define pUART_RBR pUART2_RBR -# define pUART_THR pUART2_THR -# define UART_THR UART2_THR -# define UART_LSR UART2_LSR +# define UART_BASE UART2_DLL # elif (CONFIG_UART_CONSOLE == 1) -# define pUART_DLH pUART1_DLH -# define pUART_DLL pUART1_DLL -# define pUART_GCTL pUART1_GCTL -# define pUART_IER pUART1_IER -# define pUART_IERC pUART1_IER_CLEAR -# define pUART_LCR pUART1_LCR -# define pUART_LSR pUART1_LSR -# define pUART_RBR pUART1_RBR -# define pUART_THR pUART1_THR -# define UART_THR UART1_THR -# define UART_LSR UART1_LSR +# define UART_BASE UART1_DLL # elif (CONFIG_UART_CONSOLE == 0) -# define pUART_DLH pUART0_DLH -# define pUART_DLL pUART0_DLL -# define pUART_GCTL pUART0_GCTL -# define pUART_IER pUART0_IER -# define pUART_IERC pUART0_IER_CLEAR -# define pUART_LCR pUART0_LCR -# define pUART_LSR pUART0_LSR -# define pUART_RBR pUART0_RBR -# define pUART_THR pUART0_THR -# define UART_THR UART0_THR -# define UART_LSR UART0_LSR +# define UART_BASE UART0_DLL +# endif +#else +# if CONFIG_UART_CONSOLE != 0 +# error CONFIG_UART_CONSOLE must be 0 on parts with only one UART # endif +# define UART_BASE UART_DLL #endif - -#ifndef __ASSEMBLY__ +#define pUART ((volatile struct bfin_mmr_serial *)UART_BASE) #ifdef __ADSPBF54x__ # define ACCESS_LATCH() # define ACCESS_PORT_IER() -# define CLEAR_IER() (*pUART_IERC = 0) #else -# define ACCESS_LATCH() (*pUART_LCR |= DLAB) -# define ACCESS_PORT_IER() (*pUART_LCR &= ~DLAB) -# define CLEAR_IER() (*pUART_IER = 0) +# define ACCESS_LATCH() \ + bfin_write16(&pUART->lcr, bfin_read16(&pUART->lcr) | DLAB) +# define ACCESS_PORT_IER() \ + bfin_write16(&pUART->lcr, bfin_read16(&pUART->lcr) & ~DLAB) #endif __attribute__((always_inline)) @@ -142,10 +151,10 @@ static inline void serial_early_init(void) serial_do_portmux(); /* always enable UART -- avoids anomalies 05000309 and 05000350 */ - *pUART_GCTL = UCEN; + bfin_write16(&pUART->gctl, UCEN); /* Set LCR to Word Lengh 8-bit word select */ - *pUART_LCR = WLS_8; + bfin_write16(&pUART->lcr, WLS_8); SSYNC(); } @@ -158,8 +167,8 @@ static inline void serial_early_put_div(uint16_t divisor) SSYNC(); /* Program the divisor to get the baud rate we want */ - *pUART_DLL = LOB(divisor); - *pUART_DLH = HIB(divisor); + bfin_write16(&pUART->dll, LOB(divisor)); + bfin_write16(&pUART->dlh, HIB(divisor)); SSYNC(); /* Clear DLAB in LCR to Access THR RBR IER */ @@ -174,8 +183,8 @@ static inline uint16_t serial_early_get_div(void) ACCESS_LATCH(); SSYNC(); - uint8_t dll = *pUART_DLL; - uint8_t dlh = *pUART_DLH; + uint8_t dll = bfin_read16(&pUART->dll); + uint8_t dlh = bfin_read16(&pUART->dlh); uint16_t divisor = (dlh << 8) | dll; /* Clear DLAB in LCR to Access THR RBR IER */ diff --git a/include/asm-blackfin/blackfin_local.h b/include/asm-blackfin/blackfin_local.h index 308014abac..3fd34b33fe 100644 --- a/include/asm-blackfin/blackfin_local.h +++ b/include/asm-blackfin/blackfin_local.h @@ -61,7 +61,7 @@ extern u_long get_vco(void); extern u_long get_cclk(void); extern u_long get_sclk(void); -# define bfin_revid() (*pCHIPID >> 28) +# define bfin_revid() (bfin_read_CHIPID() >> 28) extern bool bfin_os_log_check(void); extern void bfin_os_log_dump(void);