From: Philipp Tomsich Date: Fri, 5 May 2017 17:22:54 +0000 (+0200) Subject: rockchip: board: puma_rk3399: build FIT image via u-boot.itb X-Git-Tag: v2017.07-rc2~80^2~60 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=f8e3b083777844196ecd7b422ff3cfd2df904144;p=oweals%2Fu-boot.git rockchip: board: puma_rk3399: build FIT image via u-boot.itb Signed-off-by: Philipp Tomsich Acked-by: Simon Glass --- diff --git a/board/theobroma-systems/puma_rk3399/README b/board/theobroma-systems/puma_rk3399/README index 1a8d02b480..250e3459a3 100644 --- a/board/theobroma-systems/puma_rk3399/README +++ b/board/theobroma-systems/puma_rk3399/README @@ -56,8 +56,7 @@ Package the image ================= > tools/mkimage -n rk3399 -T rksd -d spl/u-boot-spl.bin spl.img - > tools/mkimage -f board/theobroma/puma_rk3399/fit_spl_atf.its \ - -E rk3399_bl3x.itb + > make CROSS_COMPILE=aarch64-linux-gnu- u-boot.itb Flash the image =============== @@ -67,7 +66,7 @@ Copy the SPL to offset 32k and the FIT image containing the payloads card. > dd if=spl.img of=/dev/sdb seek=64 - > dd if=rk3399_bl3x.itb of=/dev/sdb seek=512 + > dd if=u-boot.itb of=/dev/sdb seek=512 After powering up the board (with the inserted SD card), you should see a U-Boot console on UART0 (115200n8). diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig index 08c80efd8b..2dca1682b2 100644 --- a/configs/puma-rk3399_defconfig +++ b/configs/puma-rk3399_defconfig @@ -12,6 +12,7 @@ CONFIG_DEFAULT_DEVICE_TREE="rk3399-puma" CONFIG_FIT=y CONFIG_SPL_FIT=y CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_FIT_SOURCE="board/theobroma-systems/puma_rk3399/fit_spl_atf.its" # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set # CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set