From: Lokesh Vutla Date: Fri, 27 Sep 2019 08:02:11 +0000 (+0530) Subject: arm: k3: Add support for printing CPUINFO X-Git-Tag: v2020.01-rc1~29^2~13 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=f8ca9121896bcff1476943a96d7392eb05f55364;p=oweals%2Fu-boot.git arm: k3: Add support for printing CPUINFO Add support for printing CPU info for all K3 devices. Signed-off-by: Lokesh Vutla --- diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c index 6c453b9af4..97aa15d6a6 100644 --- a/arch/arm/mach-k3/common.c +++ b/arch/arm/mach-k3/common.c @@ -14,6 +14,8 @@ #include #include #include +#include +#include struct ti_sci_handle *get_ti_sci_handle(void) { @@ -190,3 +192,43 @@ void reset_cpu(ulong ignored) { } #endif + +#if defined(CONFIG_DISPLAY_CPUINFO) +int print_cpuinfo(void) +{ + u32 soc, rev; + char *name; + + soc = (readl(CTRLMMR_WKUP_JTAG_DEVICE_ID) & + DEVICE_ID_FAMILY_MASK) >> DEVICE_ID_FAMILY_SHIFT; + rev = (readl(CTRLMMR_WKUP_JTAG_ID) & + JTAG_ID_VARIANT_MASK) >> JTAG_ID_VARIANT_SHIFT; + + printf("SoC: "); + switch (soc) { + case AM654: + name = "AM654"; + break; + case J721E: + name = "J721E"; + break; + default: + name = "Unknown Silicon"; + }; + + printf("%s PG ", name); + switch (rev) { + case REV_PG1_0: + name = "1.0"; + break; + case REV_PG2_0: + name = "2.0"; + break; + default: + name = "Unknown Revision"; + }; + printf("%s\n", name); + + return 0; +} +#endif diff --git a/arch/arm/mach-k3/common.h b/arch/arm/mach-k3/common.h index ab68e14de8..8f9a023921 100644 --- a/arch/arm/mach-k3/common.h +++ b/arch/arm/mach-k3/common.h @@ -8,5 +8,11 @@ #include +#define AM654 2 +#define J721E 4 + +#define REV_PG1_0 0 +#define REV_PG2_0 1 + void setup_k3_mpu_regions(void); int early_console_init(void); diff --git a/arch/arm/mach-k3/include/mach/hardware.h b/arch/arm/mach-k3/include/mach/hardware.h index 4e629822aa..d670d5a56e 100644 --- a/arch/arm/mach-k3/include/mach/hardware.h +++ b/arch/arm/mach-k3/include/mach/hardware.h @@ -13,4 +13,22 @@ #ifdef CONFIG_SOC_K3_J721E #include "j721e_hardware.h" #endif + +/* Assuming these addresses and definitions stay common across K3 devices */ +#define CTRLMMR_WKUP_JTAG_DEVICE_ID 0x43000018 +#define DEVICE_ID_FAMILY_SHIFT 26 +#define DEVICE_ID_FAMILY_MASK (0x3f << 26) +#define DEVICE_ID_BASE_SHIFT 11 +#define DEVICE_ID_BASE_MASK (0x1fff << 11) +#define DEVICE_ID_SPEED_SHIFT 6 +#define DEVICE_ID_SPEED_MASK (0x1f << 6) +#define DEVICE_ID_TEMP_SHIFT 3 +#define DEVICE_ID_TEMP_MASK (0x7 << 3) + +#define CTRLMMR_WKUP_JTAG_ID 0x43000014 +#define JTAG_ID_VARIANT_SHIFT 28 +#define JTAG_ID_VARIANT_MASK (0xf << 28) +#define JTAG_ID_PARTNO_SHIFT 12 +#define JTAG_ID_PARTNO_MASK (0x7ff << 1) + #endif /* _ASM_ARCH_HARDWARE_H_ */