From: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Date: Mon, 14 Oct 2019 12:52:50 +0000 (+0200)
Subject: usb: composite: add BOS descriptor support to composite framework
X-Git-Tag: v2020.01-rc2~7^2~1
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=f69257baa8323ffdc5b4fb6af200f9994a2003bd;p=oweals%2Fu-boot.git

usb: composite: add BOS descriptor support to composite framework

To add usb-3.0 support to peripheral device add BOS & SS capability
descriptors to gadget composite framework.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Roger Quadros <rogerq@ti.com>
---

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index c7e7623747..618a7d5016 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -688,6 +688,57 @@ static void composite_setup_complete(struct usb_ep *ep, struct usb_request *req)
 				req->status, req->actual, req->length);
 }
 
+static int bos_desc(struct usb_composite_dev *cdev)
+{
+	struct usb_ext_cap_descriptor   *usb_ext;
+	struct usb_bos_descriptor       *bos = cdev->req->buf;
+
+	bos->bLength = USB_DT_BOS_SIZE;
+	bos->bDescriptorType = USB_DT_BOS;
+
+	bos->wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE);
+	bos->bNumDeviceCaps = 0;
+
+	/*
+	 * A SuperSpeed device shall include the USB2.0 extension descriptor
+	 * and shall support LPM when operating in USB2.0 HS mode.
+	 */
+	usb_ext = cdev->req->buf + le16_to_cpu(bos->wTotalLength);
+	bos->bNumDeviceCaps++;
+	le16_add_cpu(&bos->wTotalLength, USB_DT_USB_EXT_CAP_SIZE);
+	usb_ext->bLength = USB_DT_USB_EXT_CAP_SIZE;
+	usb_ext->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
+	usb_ext->bDevCapabilityType = USB_CAP_TYPE_EXT;
+	usb_ext->bmAttributes =
+		cpu_to_le32(USB_LPM_SUPPORT | USB_BESL_SUPPORT);
+
+	/*
+	 * The Superspeed USB Capability descriptor shall be implemented
+	 * by all SuperSpeed devices.
+	 */
+	if (gadget_is_superspeed(cdev->gadget)) {
+		struct usb_ss_cap_descriptor *ss_cap;
+
+		ss_cap = cdev->req->buf + le16_to_cpu(bos->wTotalLength);
+		bos->bNumDeviceCaps++;
+		le16_add_cpu(&bos->wTotalLength, USB_DT_USB_SS_CAP_SIZE);
+		ss_cap->bLength = USB_DT_USB_SS_CAP_SIZE;
+		ss_cap->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
+		ss_cap->bDevCapabilityType = USB_SS_CAP_TYPE;
+		ss_cap->bmAttributes = 0; /* LTM is not supported yet */
+		ss_cap->wSpeedSupported =
+			cpu_to_le16(USB_LOW_SPEED_OPERATION |
+				    USB_FULL_SPEED_OPERATION |
+				    USB_HIGH_SPEED_OPERATION |
+				    USB_5GBPS_OPERATION);
+		ss_cap->bFunctionalitySupport = USB_LOW_SPEED_OPERATION;
+		ss_cap->bU1devExitLat = USB_DEFAULT_U1_DEV_EXIT_LAT;
+		ss_cap->bU2DevExitLat =
+			cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT);
+	}
+	return le16_to_cpu(bos->wTotalLength);
+}
+
 /*
  * The setup() callback implements all the ep0 functionality that's
  * not handled lower down, in hardware or the hardware driver(like
@@ -776,12 +827,10 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 				value = min(w_length, (u16) value);
 			break;
 		case USB_DT_BOS:
-			/*
-			 * The USB compliance test (USB 2.0 Command Verifier)
-			 * issues this request. We should not run into the
-			 * default path here. But return for now until
-			 * the superspeed support is added.
-			 */
+			if (gadget_is_superspeed(cdev->gadget))
+				value = bos_desc(cdev);
+			if (value >= 0)
+				value = min(w_length, (u16)value);
 			break;
 		default:
 			goto unknown;
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index 264c9712a3..989a5fcbd9 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -878,6 +878,9 @@ struct usb_ss_cap_descriptor {		/* Link Power Management */
 	__le16 bU2DevExitLat;
 } __attribute__((packed));
 
+#define USB_DEFAULT_U1_DEV_EXIT_LAT     0x01	/* Less then 1 microsec */
+#define USB_DEFAULT_U2_DEV_EXIT_LAT     0x01F4	/* Less then 500 microsec */
+
 #define USB_DT_USB_SS_CAP_SIZE	10
 
 /*
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 66794d7894..06292ddeb6 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -591,6 +591,15 @@ static inline int gadget_is_otg(struct usb_gadget *g)
 #endif
 }
 
+/**
+ * gadget_is_superspeed() - return true if the hardware handles superspeed
+ * @g: controller that might support superspeed
+ */
+static inline int gadget_is_superspeed(struct usb_gadget *g)
+{
+	return g->max_speed >= USB_SPEED_SUPER;
+}
+
 /**
  * usb_gadget_frame_number - returns the current frame number
  * @gadget: controller that reports the frame number