From: Álvaro Fernández Rojas Date: Sun, 4 Feb 2018 20:10:13 +0000 (+0100) Subject: phy: add support for bcm6368 usbh phy X-Git-Tag: v2018.05-rc1~27^2~11 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=f55c1538bf163055a2891d1f0c2ac7fff8bb9b02;p=oweals%2Fu-boot.git phy: add support for bcm6368 usbh phy Signed-off-by: Álvaro Fernández Rojas Reviewed-by: Daniel Schwierzeck --- diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 43fb4c9bfd..d3fa9ded2a 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -71,6 +71,12 @@ config BCM6358_USBH_PHY help Support for the Broadcom MIPS BCM6358 USBH PHY. +config BCM6368_USBH_PHY + bool "BCM6368 USBH PHY support" + depends on PHY && ARCH_BMIPS + help + Support for the Broadcom MIPS BCM6368 USBH PHY. + config PIPE3_PHY bool "Support omap's PIPE3 PHY" depends on PHY && ARCH_OMAP2PLUS diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 04843fd49b..d8239854a3 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_$(SPL_)PHY) += phy-uclass.o obj-$(CONFIG_$(SPL_)NOP_PHY) += nop-phy.o obj-$(CONFIG_BCM6348_USBH_PHY) += bcm6348-usbh-phy.o obj-$(CONFIG_BCM6358_USBH_PHY) += bcm6358-usbh-phy.o +obj-$(CONFIG_BCM6368_USBH_PHY) += bcm6368-usbh-phy.o obj-$(CONFIG_PHY_SANDBOX) += sandbox-phy.o obj-$(CONFIG_$(SPL_)PIPE3_PHY) += ti-pipe3-phy.o obj-$(CONFIG_STI_USB_PHY) += sti_usb_phy.o diff --git a/drivers/phy/bcm6368-usbh-phy.c b/drivers/phy/bcm6368-usbh-phy.c new file mode 100644 index 0000000000..71abc0fcc4 --- /dev/null +++ b/drivers/phy/bcm6368-usbh-phy.c @@ -0,0 +1,196 @@ +/* + * Copyright (C) 2018 Álvaro Fernández Rojas + * + * Derived from linux/arch/mips/bcm63xx/usb-common.c: + * Copyright 2008 Maxime Bizon + * Copyright 2013 Florian Fainelli + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* USBH PLL Control register */ +#define USBH_PLL_REG 0x18 +#define USBH_PLL_IDDQ_PWRDN BIT(9) +#define USBH_PLL_PWRDN_DELAY BIT(10) + +/* USBH Swap Control register */ +#define USBH_SWAP_REG 0x1c +#define USBH_SWAP_OHCI_DATA BIT(0) +#define USBH_SWAP_OHCI_ENDIAN BIT(1) +#define USBH_SWAP_EHCI_DATA BIT(3) +#define USBH_SWAP_EHCI_ENDIAN BIT(4) + +/* USBH Setup register */ +#define USBH_SETUP_REG 0x28 +#define USBH_SETUP_IOC BIT(4) +#define USBH_SETUP_IPP BIT(5) + +struct bcm6368_usbh_hw { + uint32_t setup_clr; + uint32_t pll_clr; +}; + +struct bcm6368_usbh_priv { + const struct bcm6368_usbh_hw *hw; + void __iomem *regs; +}; + +static int bcm6368_usbh_init(struct phy *phy) +{ + struct bcm6368_usbh_priv *priv = dev_get_priv(phy->dev); + const struct bcm6368_usbh_hw *hw = priv->hw; + + /* configure to work in native cpu endian */ + clrsetbits_be32(priv->regs + USBH_SWAP_REG, + USBH_SWAP_EHCI_ENDIAN | USBH_SWAP_OHCI_ENDIAN, + USBH_SWAP_EHCI_DATA | USBH_SWAP_OHCI_DATA); + + /* setup config */ + if (hw->setup_clr) + clrbits_be32(priv->regs + USBH_SETUP_REG, hw->setup_clr); + + setbits_be32(priv->regs + USBH_SETUP_REG, USBH_SETUP_IOC); + + /* enable pll control */ + if (hw->pll_clr) + clrbits_be32(priv->regs + USBH_PLL_REG, hw->pll_clr); + + return 0; +} + +static struct phy_ops bcm6368_usbh_ops = { + .init = bcm6368_usbh_init, +}; + +static const struct bcm6368_usbh_hw bcm6328_hw = { + .pll_clr = USBH_PLL_IDDQ_PWRDN | USBH_PLL_PWRDN_DELAY, + .setup_clr = 0, +}; + +static const struct bcm6368_usbh_hw bcm6362_hw = { + .pll_clr = 0, + .setup_clr = 0, +}; + +static const struct bcm6368_usbh_hw bcm6368_hw = { + .pll_clr = 0, + .setup_clr = 0, +}; + +static const struct bcm6368_usbh_hw bcm63268_hw = { + .pll_clr = USBH_PLL_IDDQ_PWRDN | USBH_PLL_PWRDN_DELAY, + .setup_clr = USBH_SETUP_IPP, +}; + +static const struct udevice_id bcm6368_usbh_ids[] = { + { + .compatible = "brcm,bcm6328-usbh", + .data = (ulong)&bcm6328_hw, + }, { + .compatible = "brcm,bcm6362-usbh", + .data = (ulong)&bcm6362_hw, + }, { + .compatible = "brcm,bcm6368-usbh", + .data = (ulong)&bcm6368_hw, + }, { + .compatible = "brcm,bcm63268-usbh", + .data = (ulong)&bcm63268_hw, + }, { /* sentinel */ } +}; + +static int bcm6368_usbh_probe(struct udevice *dev) +{ + struct bcm6368_usbh_priv *priv = dev_get_priv(dev); + const struct bcm6368_usbh_hw *hw = + (const struct bcm6368_usbh_hw *)dev_get_driver_data(dev); +#if defined(CONFIG_POWER_DOMAIN) + struct power_domain pwr_dom; +#endif + struct reset_ctl rst_ctl; + struct clk clk; + fdt_addr_t addr; + fdt_size_t size; + int ret; + + addr = devfdt_get_addr_size_index(dev, 0, &size); + if (addr == FDT_ADDR_T_NONE) + return -EINVAL; + + priv->regs = ioremap(addr, size); + priv->hw = hw; + + /* enable usbh clock */ + ret = clk_get_by_name(dev, "usbh", &clk); + if (ret < 0) + return ret; + + ret = clk_enable(&clk); + if (ret < 0) + return ret; + + ret = clk_free(&clk); + if (ret < 0) + return ret; + +#if defined(CONFIG_POWER_DOMAIN) + /* enable power domain */ + ret = power_domain_get(dev, &pwr_dom); + if (ret < 0) + return ret; + + ret = power_domain_on(&pwr_dom); + if (ret < 0) + return ret; + + ret = power_domain_free(&pwr_dom); + if (ret < 0) + return ret; +#endif + + /* perform reset */ + ret = reset_get_by_index(dev, 0, &rst_ctl); + if (ret < 0) + return ret; + + ret = reset_deassert(&rst_ctl); + if (ret < 0) + return ret; + + ret = reset_free(&rst_ctl); + if (ret < 0) + return ret; + + /* enable usb_ref clock */ + ret = clk_get_by_name(dev, "usb_ref", &clk); + if (!ret) { + ret = clk_enable(&clk); + if (ret < 0) + return ret; + + ret = clk_free(&clk); + if (ret < 0) + return ret; + } + + mdelay(100); + + return 0; +} + +U_BOOT_DRIVER(bcm6368_usbh) = { + .name = "bcm6368-usbh", + .id = UCLASS_PHY, + .of_match = bcm6368_usbh_ids, + .ops = &bcm6368_usbh_ops, + .priv_auto_alloc_size = sizeof(struct bcm6368_usbh_priv), + .probe = bcm6368_usbh_probe, +};