From: Jon Loeliger <jdl@freescale.com>
Date: Fri, 20 Oct 2006 20:54:34 +0000 (-0500)
Subject: Fix compilation warnings on a few 85xx boards.
X-Git-Tag: U-Boot-1_1_6~20^2~1^2~2
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=f5012827df11ca0c9be1df5f8b153e188dc2fa7c;p=oweals%2Fu-boot.git

Fix compilation warnings on a few 85xx boards.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
---

diff --git a/board/cds/common/ft_board.c b/board/cds/common/ft_board.c
index a897d045a0..9d97905ca9 100644
--- a/board/cds/common/ft_board.c
+++ b/board/cds/common/ft_board.c
@@ -45,8 +45,6 @@ static void cds_pci_fixup(void *blob)
 		/* We rotate the interrupt pins so that the mapping
 		 * changes depending on the slot the carrier card is in.
 		 */
-		int j;
-
 		map[3] = ((map[3] + slot - 2) % 4) + 1;
 
 		map+=7;
diff --git a/board/cds/mpc8548cds/mpc8548cds.c b/board/cds/mpc8548cds/mpc8548cds.c
index 41bcf88518..7433ebf25b 100644
--- a/board/cds/mpc8548cds/mpc8548cds.c
+++ b/board/cds/mpc8548cds/mpc8548cds.c
@@ -329,7 +329,7 @@ pci_init_board(void)
 
 int last_stage_init(void)
 {
-	unsigned int temp;
+	unsigned short temp;
 
 	/* Change the resistors for the PHY */
 	/* This is needed to get the RGMII working for the 1.3+
diff --git a/board/mpc8560ads/mpc8560ads.c b/board/mpc8560ads/mpc8560ads.c
index c1572a35d3..d19bad6835 100644
--- a/board/mpc8560ads/mpc8560ads.c
+++ b/board/mpc8560ads/mpc8560ads.c
@@ -33,6 +33,10 @@
 #include <spd.h>
 #include <miiphy.h>
 
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
+
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 extern void ddr_enable_ecc(unsigned int dram_size);
 #endif