From: Kip Porterfield Date: Sun, 3 Feb 2019 18:54:18 +0000 (-0500) Subject: ramips: add support for Belkin F9K1109v1 X-Git-Tag: v19.07.0-rc1~1147 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=f2c83532f92c5fa43165e1c5a3cd7f5cf4e9e3b3;p=oweals%2Fopenwrt.git ramips: add support for Belkin F9K1109v1 Device specification: - SoC: Ralink RT3883 (MIPS 74Kc) 500Mhz - RAM: 64Mb - Flash: 8MB (SPI-NOR) - Ethernet: 10/100/1000 Mbps - WLAN Wireless 1: SoC-integrated : 2.4/5 GHz Wireless 2: 2.4 GHz RT3092L - LED: 2x USB, WAN, LAN - Key: WPS, reset - Serial: 4-pin header, (57600,8,N,1), 3.3V TTL, GND, RX, TX, V - J12 marking on board - USB ports: 2 x USB 2.0 Flashing instructions: Option 1 (from bootloader web) - Hold reset button on the back of router when plugging in power (for at-least 10 seconds after plugged in) - Connect to a Lan port - Set computer IP to 10.10.10.3 - Go to http://10.10.10.123 in a web browser - Click the Browse... Button and select the *squashfs.sysupgrade.bin file then click APPLY Option 2 (from the stock admin web) - Go to firmware upgrade - Upload the **factory** image *initramfs.bin first - Boot into openwrt - From Luci web in openwrt upload the *squashfs.sysupgrade.bin Signed-off-by: Kip Porterfield Signed-off-by: Christian Lamparter [added v1 to the compatible identifier, added pciid for the RT3092L, fixed pci unit-address, split out the F9K110X.dtsi to prepare for a possible F9K1103 patch] --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index cbc003a1de..df5dd84d5a 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -60,6 +60,10 @@ bdcom,wap2100-sk|\ hiwifi,hc5861b) set_wifi_led "$boardname:green:wlan2g" ;; +belkin,f9k1109v1) + set_usb_led "$boardname:green:usb1" + ucidef_set_led_netdev "lan" "lan" "$boardname:blue:wps" "eth0" + ;; broadway) set_wifi_led "$boardname:red:wps_active" ;; diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index f968aafc8e..8417ac68ab 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -199,6 +199,7 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0" ;; + belkin,f9k1109v1|\ rt-n15|\ wl-351) ucidef_add_switch "switch0" \ @@ -483,6 +484,10 @@ ramips_setup_macs() lan_mac=$(macaddr_setbit_la "$lan_mac") wan_mac=$(macaddr_add "$lan_mac" 1) ;; + belkin,f9k1109v1) + wan_mac=$(mtd_get_mac_ascii uboot-env HW_WAN_MAC) + lan_mac=$(mtd_get_mac_ascii uboot-env HW_LAN_MAC) + ;; br-6475nd) lan_mac=$(cat /sys/class/net/eth0/address) wan_mac=$(mtd_get_mac_binary devdata 7) diff --git a/target/linux/ramips/dts/F9K1109V1.dts b/target/linux/ramips/dts/F9K1109V1.dts new file mode 100644 index 0000000000..cdd2b6b714 --- /dev/null +++ b/target/linux/ramips/dts/F9K1109V1.dts @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "F9K110x.dtsi" + +#include +#include + +/ { + compatible = "belkin,f9k1109v1", "ralink,rt3883-soc"; + model = "Belkin F9K1109 Version 1.0"; + + aliases { + led-boot = &led_status_amber; + led-failsafe = &led_status_amber; + led-running = &led_status_blue; + led-upgrade = &led_status_amber; + }; + + leds { + compatible = "gpio-leds"; + + led_status_amber: internet_amber { + label = "f9k1109v1:amber:internet"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + }; + + led_status_blue: internet_blue { + label = "f9k1109v1:blue:internet"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + + usb1 { + label = "f9k1109v1:green:usb1"; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + }; + + usb2 { + label = "f9k1109v1:green:usb2"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + wps_amber { + label = "f9k1109v1:amber:wps"; + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + }; + + wps_blue { + label = "f9k1109v1:blue:wps"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + reset { + label = "reset"; + gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; diff --git a/target/linux/ramips/dts/F9K110x.dtsi b/target/linux/ramips/dts/F9K110x.dtsi new file mode 100644 index 0000000000..58d3a6f860 --- /dev/null +++ b/target/linux/ramips/dts/F9K110x.dtsi @@ -0,0 +1,101 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "rt3883.dtsi" + +/ { + compatible = "ralink,rt3883-soc"; +}; + +&gpio1 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "uboot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7a0000>; + }; + + partition@7f0000 { + label = "user-cfg"; + reg = <0x7f0000 0x10000>; + read-only; + }; + }; + }; +}; + +ðernet { + port@0 { + mediatek,fixed-link = <1000 1 1 1>; + phy-mode = "rgmii"; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "uartf"; + ralink,function = "gpio"; + }; + }; +}; + +&wmac { + status = "okay"; + ralink,mtd-eeprom = <&factory 0>; +}; + +&pci { + status = "okay"; +}; + +&pci1 { + status = "okay"; + + wifi@1,0 { + compatible = "pci1814,3091"; + reg = <0x10000 0 0 0 0>; + ralink,5ghz = <0>; + ralink,mtd-eeprom = <&factory 0x8000>; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; diff --git a/target/linux/ramips/image/rt3883.mk b/target/linux/ramips/image/rt3883.mk index abee533d01..41b2c3dd5f 100644 --- a/target/linux/ramips/image/rt3883.mk +++ b/target/linux/ramips/image/rt3883.mk @@ -41,6 +41,18 @@ endef TARGET_DEVICES += dir-645 +define Device/belkin_f9k1109v1 + DTS := F9K1109V1 + BLOCKSIZE := 64k + DEVICE_TITLE := Belkin F9K1109 Version 1.0 + DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 swconfig + IMAGE_SIZE := 7224k + KERNEL := kernel-bin | patch-dtb | lzma -d16 | uImage lzma + # Stock firmware checks for this uImage image name during upload. + UIMAGE_NAME := N750F9K1103VB +endef +TARGET_DEVICES += belkin_f9k1109v1 + define Device/hpm DTS := HPM BLOCKSIZE := 64k