From: Adam Ford <aford173@gmail.com>
Date: Sat, 13 May 2017 13:14:37 +0000 (-0500)
Subject: omap3: omap3_logic: switch to using TI_COMMON_CMD_OPTION
X-Git-Tag: v2017.07-rc1~260
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=eec342ab184fe2c0e0b244956b9bf92588863499;p=oweals%2Fu-boot.git

omap3: omap3_logic: switch to using TI_COMMON_CMD_OPTION

Enable TI_COMMON_CMD_OPTIONS and remove similar options
from the defconfig. Updated with savedefconfig

CMD_USB isn't enabled yet.  I have some testing to do with
musb.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
---

diff --git a/board/logicpd/omap3som/Kconfig b/board/logicpd/omap3som/Kconfig
index 03d272a806..68d40dcd62 100644
--- a/board/logicpd/omap3som/Kconfig
+++ b/board/logicpd/omap3som/Kconfig
@@ -9,4 +9,6 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
 	default "omap3_logic"
 
+source "board/ti/common/Kconfig"
+
 endif
diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig
index 561bdfbceb..50450c9653 100644
--- a/configs/omap3_logic_defconfig
+++ b/configs/omap3_logic_defconfig
@@ -1,11 +1,11 @@
 CONFIG_ARM=y
 CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_TI_COMMON_CMD_OPTIONS=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_OMAP34XX=y
 CONFIG_TARGET_OMAP3_LOGIC=y
 CONFIG_SPL_STACK_R_ADDR=0x82000000
 CONFIG_DEFAULT_DEVICE_TREE="logicpd-torpedo-37xx-devkit"
-CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="NAND"
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y
@@ -16,29 +16,14 @@ CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="OMAP Logic # "
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_IMLS is not set
-CONFIG_CMD_ASKENV=y
 # CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PART=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_I2C=y
+# CONFIG_CMD_USB is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
 CONFIG_CMD_UBI=y
 CONFIG_ISO_PARTITION=y
-CONFIG_EFI_PARTITION=y
 CONFIG_OF_CONTROL=y
 # CONFIG_BLK is not set
 CONFIG_DM_I2C=y