From: Adam Ford Date: Fri, 11 Aug 2017 13:51:20 +0000 (-0500) Subject: Convert CONFIG_SPL_OMAP3_ID_NAND to Kconfig X-Git-Tag: v2017.09-rc4~31 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=edd1653f04b3fae7e377be5f89e592f2b6266426;p=oweals%2Fu-boot.git Convert CONFIG_SPL_OMAP3_ID_NAND to Kconfig This converts the following to Kconfig: CONFIG_SPL_OMAP3_ID_NAND Signed-off-by: Adam Ford Reviewed-by: Simon Glass --- diff --git a/README b/README index 1b31d0e58f..fc40ddfb27 100644 --- a/README +++ b/README @@ -2835,10 +2835,6 @@ FIT uImage format: Define this if you need to first read the OOB and then the data. This is used, for example, on davinci platforms. - CONFIG_SPL_OMAP3_ID_NAND - Support for an OMAP3-specific set of functions to return the - ID and MFR of the first attached NAND chip, if present. - CONFIG_SPL_RAM_DEVICE Support for running image already present in ram, in SPL binary diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 72832ad099..7efef6b84b 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -20,6 +20,7 @@ config OMAP34XX imply SPL_LIBGENERIC_SUPPORT imply SPL_MMC_SUPPORT imply SPL_NAND_SUPPORT + imply SPL_OMAP3_ID_NAND imply SPL_POWER_SUPPORT imply SPL_SERIAL_SUPPORT imply SYS_I2C_OMAP24XX diff --git a/arch/arm/mach-omap2/omap3/Kconfig b/arch/arm/mach-omap2/omap3/Kconfig index 7b298d671d..b90cadef8f 100644 --- a/arch/arm/mach-omap2/omap3/Kconfig +++ b/arch/arm/mach-omap2/omap3/Kconfig @@ -149,6 +149,12 @@ config TARGET_SNIPER endchoice +config SPL_OMAP3_ID_NAND + bool "Support OMAP3-specific ID and MFR function" + help + Support for an OMAP3-specific set of functions to return the + ID and MFR of the first attached NAND chip, if present. + config SYS_SOC default "omap3" diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index a94d55fa3a..e0f5765eca 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -258,7 +258,6 @@ #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_OMAP3_ID_NAND /* NAND boot config */ #define CONFIG_SYS_NAND_5_ADDR_CYCLE diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 89880916e5..26e2c8dc18 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -251,7 +251,6 @@ #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET /* Defines for SPL */ -#define CONFIG_SPL_OMAP3_ID_NAND /* NAND boot config */ #define CONFIG_SYS_NAND_BUSWIDTH_16BIT diff --git a/include/configs/omap3_cairo.h b/include/configs/omap3_cairo.h index 560e50081f..b4d7f17131 100644 --- a/include/configs/omap3_cairo.h +++ b/include/configs/omap3_cairo.h @@ -177,7 +177,6 @@ #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET /* Defines for SPL */ -#define CONFIG_SPL_OMAP3_ID_NAND /* NAND boot config */ #define CONFIG_SYS_NAND_5_ADDR_CYCLE diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 9930483406..3f4824259c 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -73,7 +73,6 @@ #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET #define CONFIG_ENV_OVERWRITE -#define CONFIG_SPL_OMAP3_ID_NAND #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ #define CONFIG_MTD_PARTITIONS /* required for UBI partition support */ #endif /* CONFIG_NAND */ diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index dc137dbd41..c75027b411 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -119,7 +119,6 @@ #define CONFIG_SYS_ONENAND_BLOCK_SIZE (128*1024) /* NAND config */ -#define CONFIG_SPL_OMAP3_ID_NAND #define CONFIG_SYS_NAND_BUSWIDTH_16BIT #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT 64 diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 67b5562da1..bdd4bb6c19 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -253,8 +253,6 @@ /* Defines for SPL */ -#define CONFIG_SPL_OMAP3_ID_NAND - /* NAND: SPL falcon mode configs */ #ifdef CONFIG_SPL_OS_BOOT #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h index d47dc8bba9..9f6e243ef5 100644 --- a/include/configs/tao3530.h +++ b/include/configs/tao3530.h @@ -239,7 +239,6 @@ #define CONFIG_SPL_NAND_BASE #define CONFIG_SPL_NAND_DRIVERS #define CONFIG_SPL_NAND_ECC -#define CONFIG_SPL_OMAP3_ID_NAND /* NAND boot config */ #define CONFIG_SYS_NAND_5_ADDR_CYCLE diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 4651bb55e7..648f83c6fb 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -2223,7 +2223,6 @@ CONFIG_SPL_NAND_SIMPLE CONFIG_SPL_NAND_SOFTECC CONFIG_SPL_NAND_WORKSPACE CONFIG_SPL_NO_CPU_SUPPORT_CODE -CONFIG_SPL_OMAP3_ID_NAND CONFIG_SPL_PAD_TO CONFIG_SPL_PANIC_ON_RAW_IMAGE CONFIG_SPL_PBL_PAD