From: Vagrant Cascadian Date: Sun, 1 May 2016 02:18:00 +0000 (-0700) Subject: Fix spelling of "occurred". X-Git-Tag: v2016.05~37 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=eae4b2b67bc8c68e2440616a447ca6c6898ad188;p=oweals%2Fu-boot.git Fix spelling of "occurred". Signed-off-by: Vagrant Cascadian Reviewed-by: Simon Glass --- diff --git a/board/bf533-ezkit/flash.c b/board/bf533-ezkit/flash.c index 3180a76fa6..a7b3519d95 100644 --- a/board/bf533-ezkit/flash.c +++ b/board/bf533-ezkit/flash.c @@ -320,7 +320,7 @@ int poll_toggle_bit(long lOffset) } timeout--; } - printf("Time out occured \n"); + printf("Time out occurred \n"); if (timeout < 0) return FLASH_FAIL; } diff --git a/board/mpl/pip405/pip405.c b/board/mpl/pip405/pip405.c index 7c7690ff55..1bd2fbfc58 100644 --- a/board/mpl/pip405/pip405.c +++ b/board/mpl/pip405/pip405.c @@ -777,7 +777,7 @@ void print_pip405_info (void) ((sysman & 0x10) == 0x10) ? "" : "not "); printf ("INIT asserts %sINT1# (NMI)\n", ((sysman & 0x20) == 0x20) ? "" : "not "); - printf ("INIT occured %d\n", (sysman >> 6) & 0x1); + printf ("INIT occurred %d\n", (sysman >> 6) & 0x1); printf ("SER1 is routed to %s\n", ((flashcom & 0x1) == 0x1) ? "RS485" : "RS232"); printf ("COM2 is routed to %s\n", diff --git a/board/tqc/tqm5200/cmd_stk52xx.c b/board/tqc/tqm5200/cmd_stk52xx.c index 9d2d5a8fa9..dc22ee4024 100644 --- a/board/tqc/tqm5200/cmd_stk52xx.c +++ b/board/tqc/tqm5200/cmd_stk52xx.c @@ -72,7 +72,7 @@ static int spi_transmit(unsigned char data) spi->dr = data; /* wait for SPI transmission completed */ while (!(spi->sr & 0x80)) { - if (spi->sr & 0x40) { /* if write collision occured */ + if (spi->sr & 0x40) { /* if write collision occurred */ int dummy; /* do dummy read to clear status register */ diff --git a/cmd/fdc.c b/cmd/fdc.c index 058ae89a38..d2281abbda 100644 --- a/cmd/fdc.c +++ b/cmd/fdc.c @@ -189,7 +189,7 @@ int wait_for_fdc_int(void) while((read_fdc_reg(FDC_SRA)&0x80)==0) { timeout--; udelay(10); - if(timeout==0) /* timeout occured */ + if(timeout==0) /* timeout occurred */ return false; } return true; @@ -205,7 +205,7 @@ int read_fdc_byte(void) /* direction out and ready */ udelay(10); timeout--; - if(timeout==0) /* timeout occured */ + if(timeout==0) /* timeout occurred */ return -1; } return read_fdc_reg(FDC_FIFO); @@ -235,7 +235,7 @@ int write_fdc_byte(unsigned char val) timeout--; udelay(10); fdc_need_more_output(); - if(timeout==0) /* timeout occured */ + if(timeout==0) /* timeout occurred */ return false; } write_fdc_reg(FDC_FIFO,val); @@ -395,7 +395,7 @@ int fdc_terminate(FDC_COMMAND_STRUCT *pCMD) int i; for(i=0;i<100;i++) udelay(500); /* wait 500usec for fifo overrun */ - while((read_fdc_reg(FDC_SRA)&0x80)==0x00); /* wait as long as no int has occured */ + while((read_fdc_reg(FDC_SRA)&0x80)==0x00); /* wait as long as no int has occurred */ for(i=0;i<7;i++) { pCMD->result[i]=(unsigned char)read_fdc_byte(); } diff --git a/common/kgdb.c b/common/kgdb.c index d357463695..daf53bed7a 100644 --- a/common/kgdb.c +++ b/common/kgdb.c @@ -326,7 +326,7 @@ handle_exception (struct pt_regs *regs) return (0); } - /* probably should check which exception occured as well */ + /* probably should check which exception occurred as well */ if (longjmp_on_fault) { longjmp_on_fault = 0; kgdb_longjmp(error_jmp_buf, KGDBERR_MEMFAULT); diff --git a/common/usb_hub.c b/common/usb_hub.c index e6a2cdb6f8..4f59802d59 100644 --- a/common/usb_hub.c +++ b/common/usb_hub.c @@ -475,7 +475,7 @@ static int usb_scan_port(struct usb_device_scan *usb_scan) return 0; /* Otherwise the device will get removed */ - printf("Port %d over-current occured %d times\n", i + 1, + printf("Port %d over-current occurred %d times\n", i + 1, hub->overcurrent_count[i]); } diff --git a/drivers/ddr/marvell/a38x/ddr3_init.h b/drivers/ddr/marvell/a38x/ddr3_init.h index cb3fb24416..8cb08864c2 100644 --- a/drivers/ddr/marvell/a38x/ddr3_init.h +++ b/drivers/ddr/marvell/a38x/ddr3_init.h @@ -120,7 +120,7 @@ #define MV_NO_RESOURCE (0x13) /* Resource not available (memory ...) */ #define MV_FULL (0x14) /* Item is full (Queue or table etc...) */ #define MV_EMPTY (0x15) /* Item is empty (Queue or table etc...) */ -#define MV_INIT_ERROR (0x16) /* Error occured while INIT process */ +#define MV_INIT_ERROR (0x16) /* Error occurred while INIT process */ #define MV_HW_ERROR (0x17) /* Hardware error */ #define MV_TX_ERROR (0x18) /* Transmit operation not succeeded */ #define MV_RX_ERROR (0x19) /* Recieve operation not succeeded */ diff --git a/drivers/ddr/marvell/axp/ddr3_hw_training.h b/drivers/ddr/marvell/axp/ddr3_hw_training.h index cffa7c4ff9..343a6b6672 100644 --- a/drivers/ddr/marvell/axp/ddr3_hw_training.h +++ b/drivers/ddr/marvell/axp/ddr3_hw_training.h @@ -41,7 +41,7 @@ #define MV_NO_RESOURCE (0x13) /* Resource not available (memory ...) */ #define MV_FULL (0x14) /* Item is full (Queue or table etc...) */ #define MV_EMPTY (0x15) /* Item is empty (Queue or table etc...) */ -#define MV_INIT_ERROR (0x16) /* Error occured while INIT process */ +#define MV_INIT_ERROR (0x16) /* Error occurred while INIT process */ #define MV_HW_ERROR (0x17) /* Hardware error */ #define MV_TX_ERROR (0x18) /* Transmit operation not succeeded */ #define MV_RX_ERROR (0x19) /* Recieve operation not succeeded */ diff --git a/drivers/i2c/kona_i2c.c b/drivers/i2c/kona_i2c.c index 9af496bbb1..11f29d926d 100644 --- a/drivers/i2c/kona_i2c.c +++ b/drivers/i2c/kona_i2c.c @@ -381,7 +381,7 @@ static int bcm_kona_i2c_write_fifo_single(struct bcm_kona_i2c_dev *dev, return -EREMOTEIO; } - /* Check if a timeout occured */ + /* Check if a timeout occurred */ if (!time_left) { printf("completion timed out\n"); return -EREMOTEIO; diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c index 4814fa202a..6a45d28a72 100644 --- a/drivers/mtd/nand/omap_gpmc.c +++ b/drivers/mtd/nand/omap_gpmc.c @@ -106,7 +106,7 @@ static uint32_t gen_true_ecc(uint8_t *ecc_buf) /* * omap_correct_data - Compares the ecc read from nand spare area with ECC - * registers values and corrects one bit error if it has occured + * registers values and corrects one bit error if it has occurred * Further details can be had from OMAP TRM and the following selected links: * http://en.wikipedia.org/wiki/Hamming_code * http://www.cs.utexas.edu/users/plaxton/c/337/05f/slides/ErrorCorrection-4.pdf @@ -479,7 +479,7 @@ static void omap_reverse_list(u8 *list, unsigned int length) /* * omap_correct_data_bch - Compares the ecc read from nand spare area - * with ECC registers values and corrects one bit error if it has occured + * with ECC registers values and corrects one bit error if it has occurred * * @mtd: MTD device structure * @dat: page data diff --git a/drivers/net/4xx_enet.c b/drivers/net/4xx_enet.c index 3c30f42b42..bc52ed35cc 100644 --- a/drivers/net/4xx_enet.c +++ b/drivers/net/4xx_enet.c @@ -1726,7 +1726,7 @@ static void mal_err (struct eth_device *dev, unsigned long isr, mtdcr (MAL0_RXDEIR, 0x80000000); #ifdef INFO_4XX_ENET - printf("\nMAL error occured.... ISR = %lx UIC = = %lx MAL_DEF = %lx MAL_ERR= %lx\n", + printf("\nMAL error occurred.... ISR = %lx UIC = = %lx MAL_DEF = %lx MAL_ERR= %lx\n", isr, uic, maldef, mal_errr); #endif @@ -1740,7 +1740,7 @@ static void emac_err (struct eth_device *dev, unsigned long isr) { EMAC_4XX_HW_PST hw_p = dev->priv; - printf ("EMAC%d error occured.... ISR = %lx\n", hw_p->devnum, isr); + printf ("EMAC%d error occurred.... ISR = %lx\n", hw_p->devnum, isr); out_be32((void *)EMAC0_ISR + hw_p->hw_addr, isr); } diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index 59ea11cd6a..611eabb546 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c @@ -381,7 +381,7 @@ static int enc_phy_link_wait(enc_dev_t *enc) udelay(1000); } - /* timeout occured */ + /* timeout occurred */ printf("%s: link down\n", enc->dev->name); return 1; } diff --git a/drivers/net/ne2000_base.c b/drivers/net/ne2000_base.c index 71d133cc8f..67bf140a37 100644 --- a/drivers/net/ne2000_base.c +++ b/drivers/net/ne2000_base.c @@ -582,7 +582,7 @@ dp83902a_Overflow(void) /* * Read in as many packets as we can and acknowledge any and receive * interrupts. Since the buffer has overflowed, a receive event of - * some kind will have occured. + * some kind will have occurred. */ dp83902a_RxEvent(); DP_OUT(base, DP_ISR, DP_ISR_RxP|DP_ISR_RxE); @@ -592,7 +592,7 @@ dp83902a_Overflow(void) DP_OUT(base, DP_TCR, DP_TCR_NORMAL); /* - * If a transmit command was issued, but no transmit event has occured, + * If a transmit command was issued, but no transmit event has occurred, * restart it here. */ DP_IN(base, DP_ISR, isr); diff --git a/drivers/usb/gadget/mpc8xx_udc.c b/drivers/usb/gadget/mpc8xx_udc.c index b3e178abef..ad5ea7a6b8 100644 --- a/drivers/usb/gadget/mpc8xx_udc.c +++ b/drivers/usb/gadget/mpc8xx_udc.c @@ -170,7 +170,7 @@ int udc_init (void) /* udc_irq * - * Poll for whatever events may have occured + * Poll for whatever events may have occurred */ void udc_irq (void) { diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c index 9a3b61aa55..49479368d2 100644 --- a/drivers/usb/musb/musb_hcd.c +++ b/drivers/usb/musb/musb_hcd.c @@ -73,9 +73,9 @@ static void write_toggle(struct usb_device *dev, u8 ep, u8 dir_out) } /* - * This function checks if RxStall has occured on the endpoint. If a RxStall - * has occured, the RxStall is cleared and 1 is returned. If RxStall has - * not occured, 0 is returned. + * This function checks if RxStall has occurred on the endpoint. If a RxStall + * has occurred, the RxStall is cleared and 1 is returned. If RxStall has + * not occurred, 0 is returned. */ static u8 check_stall(u8 ep, u8 dir_out) { diff --git a/include/linux/fb.h b/include/linux/fb.h index 652cf3bab7..fcf331b79f 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -388,14 +388,14 @@ struct fb_cursor_user { #define FB_EVENT_GET_CONSOLE_MAP 0x07 /* CONSOLE-SPECIFIC: set console to framebuffer mapping */ #define FB_EVENT_SET_CONSOLE_MAP 0x08 -/* A hardware display blank change occured */ +/* A hardware display blank change occurred */ #define FB_EVENT_BLANK 0x09 /* Private modelist is to be replaced */ #define FB_EVENT_NEW_MODELIST 0x0A /* The resolution of the passed in fb_info about to change and all vc's should be changed */ #define FB_EVENT_MODE_CHANGE_ALL 0x0B -/* A software display blank change occured */ +/* A software display blank change occurred */ #define FB_EVENT_CONBLANK 0x0C /* Get drawing requirements */ #define FB_EVENT_GET_REQ 0x0D diff --git a/include/test/ut.h b/include/test/ut.h index da7c1a9d26..85434d785a 100644 --- a/include/test/ut.h +++ b/include/test/ut.h @@ -17,9 +17,9 @@ struct unit_test_state; * ut_fail() - Record failure of a unit test * * @uts: Test state - * @fname: Filename where the error occured - * @line: Line number where the error occured - * @func: Function name where the error occured + * @fname: Filename where the error occurred + * @line: Line number where the error occurred + * @func: Function name where the error occurred * @cond: The condition that failed */ void ut_fail(struct unit_test_state *uts, const char *fname, int line, @@ -29,9 +29,9 @@ void ut_fail(struct unit_test_state *uts, const char *fname, int line, * ut_failf() - Record failure of a unit test * * @uts: Test state - * @fname: Filename where the error occured - * @line: Line number where the error occured - * @func: Function name where the error occured + * @fname: Filename where the error occurred + * @line: Line number where the error occurred + * @func: Function name where the error occurred * @cond: The condition that failed * @fmt: printf() format string for the error, followed by args */ diff --git a/include/usbdevice.h b/include/usbdevice.h index da5af6efe4..f27e17f124 100644 --- a/include/usbdevice.h +++ b/include/usbdevice.h @@ -438,7 +438,7 @@ typedef enum usb_device_event { DEVICE_HUB_RESET, /* bi - bus has been unplugged */ DEVICE_DESTROY, /* bi - device instance should be destroyed */ - DEVICE_HOTPLUG, /* bi - a hotplug event has occured */ + DEVICE_HOTPLUG, /* bi - a hotplug event has occurred */ DEVICE_FUNCTION_PRIVATE, /* function - private */