From: Michal Simek <michal.simek@xilinx.com>
Date: Wed, 24 Sep 2014 12:55:03 +0000 (+0200)
Subject: ARM: zynq: Use CMD_FS_GENERIC
X-Git-Tag: v2015.04-rc1~39^2~6
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=e9d69c1c717649cf6ee909139ccf9c04e82a7075;p=oweals%2Fu-boot.git

ARM: zynq: Use CMD_FS_GENERIC

Based on:
"am335x_evm: Enable CMD_EXT4 and CMD_FS_GENERIC, add bootpart to env"
(sha1: 73a27a84e58cb99b4e64ed6a35eab5bc61f44f29)

Fix filesystem specific commands for loading.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 3a62ec75db..f968e7666d 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -100,6 +100,7 @@
 # define CONFIG_DOS_PARTITION
 # define CONFIG_CMD_EXT4
 # define CONFIG_CMD_EXT4_WRITE
+# define CONFIG_CMD_FS_GENERIC
 #endif
 
 #define CONFIG_SYS_I2C_ZYNQ
@@ -159,14 +160,14 @@
 		"cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \
 		"bootm ${load_addr}\0" \
 	"sdboot=echo Copying FIT from SD to RAM... && " \
-		"fatload mmc 0 ${load_addr} ${fit_image} && " \
+		"load mmc 0 ${load_addr} ${fit_image} && " \
 		"bootm ${load_addr}\0" \
 	"jtagboot=echo TFTPing FIT to RAM... && " \
 		"tftpboot ${load_addr} ${fit_image} && " \
 		"bootm ${load_addr}\0" \
 	"usbboot=if usb start; then " \
 			"echo Copying FIT from USB to RAM... && " \
-			"fatload usb 0 ${load_addr} ${fit_image} && " \
+			"load usb 0 ${load_addr} ${fit_image} && " \
 			"bootm ${load_addr}\0" \
 		"fi\0"