From: Heiko Stuebner Date: Tue, 16 Jul 2019 20:18:21 +0000 (+0200) Subject: rockchip: add px30 architecture core X-Git-Tag: v2020.01-rc3~2^2~33 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=e9ccb2f526edab7626abb69b2a6aadcb52510889;p=oweals%2Fu-boot.git rockchip: add px30 architecture core Add core architecture code to support the px30 soc. This includes a separate tpl board file due to very limited sram size as well as a non-dm sdram driver, as this also has to fit into the tiny sram. Signed-off-by: Heiko Stuebner Reviewed-by: Kever Yang --- diff --git a/arch/arm/include/asm/arch-px30/boot0.h b/arch/arm/include/asm/arch-px30/boot0.h new file mode 100644 index 0000000000..2e78b074ad --- /dev/null +++ b/arch/arm/include/asm/arch-px30/boot0.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2019 Rockchip Electronics Co., Ltd + */ + +#ifndef __ASM_ARCH_BOOT0_H__ +#define __ASM_ARCH_BOOT0_H__ + +#include + +#endif diff --git a/arch/arm/include/asm/arch-px30/gpio.h b/arch/arm/include/asm/arch-px30/gpio.h new file mode 100644 index 0000000000..eca79d5159 --- /dev/null +++ b/arch/arm/include/asm/arch-px30/gpio.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2019 Rockchip Electronics Co., Ltd + */ + +#ifndef __ASM_ARCH_GPIO_H__ +#define __ASM_ARCH_GPIO_H__ + +#include + +#endif diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 7746b661e5..3cb934a3f3 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -1,5 +1,27 @@ if ARCH_ROCKCHIP +config ROCKCHIP_PX30 + bool "Support Rockchip PX30" + select ARM64 + select SUPPORT_SPL + select SUPPORT_TPL + select SPL + select TPL + select TPL_TINY_FRAMEWORK if TPL + select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL + select TPL_NEEDS_SEPARATE_STACK if TPL + imply SPL_SEPARATE_BSS + select SPL_SERIAL_SUPPORT + select TPL_SERIAL_SUPPORT + select DEBUG_UART_BOARD_INIT + imply ROCKCHIP_COMMON_BOARD + imply SPL_ROCKCHIP_COMMON_BOARD + help + The Rockchip PX30 is a ARM-based SoC with a quad-core Cortex-A35 + including NEON and GPU, Mali-400 graphics, several DDR3 options + and video codec support. Peripherals include Gigabit Ethernet, + USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs. + config ROCKCHIP_RK3036 bool "Support Rockchip RK3036" select CPU_V7A @@ -317,6 +339,7 @@ config TPL_ROCKCHIP_EARLYRETURN_TO_BROM config SPL_MMC_SUPPORT default y if !SPL_ROCKCHIP_BACK_TO_BROM +source "arch/arm/mach-rockchip/px30/Kconfig" source "arch/arm/mach-rockchip/rk3036/Kconfig" source "arch/arm/mach-rockchip/rk3128/Kconfig" source "arch/arm/mach-rockchip/rk3188/Kconfig" diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile index a9563ade4f..3b58158ff9 100644 --- a/arch/arm/mach-rockchip/Makefile +++ b/arch/arm/mach-rockchip/Makefile @@ -11,6 +11,7 @@ obj-spl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o obj-spl-$(CONFIG_SPL_ROCKCHIP_COMMON_BOARD) += spl.o spl-boot-order.o obj-tpl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o obj-tpl-$(CONFIG_TPL_ROCKCHIP_COMMON_BOARD) += tpl.o +obj-tpl-$(CONFIG_ROCKCHIP_PX30) += px30-board-tpl.o obj-spl-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o @@ -27,6 +28,7 @@ endif obj-$(CONFIG_$(SPL_TPL_)RAM) += sdram.o +obj-$(CONFIG_ROCKCHIP_PX30) += px30/ obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036/ obj-$(CONFIG_ROCKCHIP_RK3128) += rk3128/ obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188/ diff --git a/arch/arm/mach-rockchip/px30-board-tpl.c b/arch/arm/mach-rockchip/px30-board-tpl.c new file mode 100644 index 0000000000..8c8976f61c --- /dev/null +++ b/arch/arm/mach-rockchip/px30-board-tpl.c @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2019 Rockchip Electronics Co., Ltd + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define TIMER_LOAD_COUNT0 0x00 +#define TIMER_LOAD_COUNT1 0x04 +#define TIMER_CUR_VALUE0 0x08 +#define TIMER_CUR_VALUE1 0x0c +#define TIMER_CONTROL_REG 0x10 + +#define TIMER_EN 0x1 +#define TIMER_FMODE (0 << 1) +#define TIMER_RMODE (1 << 1) + +void secure_timer_init(void) +{ + writel(0, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG); + writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_LOAD_COUNT0); + writel(0xffffffff, CONFIG_ROCKCHIP_STIMER_BASE + TIMER_LOAD_COUNT1); + writel(TIMER_EN | TIMER_FMODE, + CONFIG_ROCKCHIP_STIMER_BASE + TIMER_CONTROL_REG); +} + +void board_init_f(ulong dummy) +{ + int ret; + +#ifdef CONFIG_DEBUG_UART + debug_uart_init(); + /* + * Debug UART can be used from here if required: + * + * debug_uart_init(); + * printch('a'); + * printhex8(0x1234); + * printascii("string"); + */ + printascii("U-Boot TPL board init\n"); +#endif + + secure_timer_init(); + ret = sdram_init(); + if (ret) + printascii("sdram_init failed\n"); + + /* return to maskrom */ + back_to_bootrom(BROM_BOOT_NEXTSTAGE); +} diff --git a/arch/arm/mach-rockchip/px30/Kconfig b/arch/arm/mach-rockchip/px30/Kconfig new file mode 100644 index 0000000000..109a37be15 --- /dev/null +++ b/arch/arm/mach-rockchip/px30/Kconfig @@ -0,0 +1,41 @@ +if ROCKCHIP_PX30 + +config TARGET_EVB_PX30 + bool "EVB_PX30" + +config ROCKCHIP_BOOT_MODE_REG + default 0xff010200 + +config SYS_SOC + default "px30" + +config SYS_MALLOC_F_LEN + default 0x400 + +config SPL_SERIAL_SUPPORT + default y + +config TPL_LDSCRIPT + default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds" + +config TPL_TEXT_BASE + default 0xff0e1000 + +config TPL_MAX_SIZE + default 10240 + +config TPL_STACK + default 0xff0e4fff + +config DEBUG_UART2_CHANNEL + int "Mux channel to use for debug UART2" + depends on DEBUG_UART_BOARD_INIT + default 0 + help + UART2 can use two different set of pins to route the output. + For using the UART for early debugging the route to use needs + to be declared (0 or 1). + +source "board/rockchip/evb_px30/Kconfig" + +endif diff --git a/arch/arm/mach-rockchip/px30/Makefile b/arch/arm/mach-rockchip/px30/Makefile new file mode 100644 index 0000000000..080ce146f7 --- /dev/null +++ b/arch/arm/mach-rockchip/px30/Makefile @@ -0,0 +1,13 @@ +# +# (C) Copyright 2017 Rockchip Electronics Co., Ltd. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += clk_px30.o + +ifndef CONFIG_TPL_BUILD +obj-y += syscon_px30.o +endif + +obj-y += px30.o diff --git a/arch/arm/mach-rockchip/px30/clk_px30.c b/arch/arm/mach-rockchip/px30/clk_px30.c new file mode 100644 index 0000000000..0bd6b471da --- /dev/null +++ b/arch/arm/mach-rockchip/px30/clk_px30.c @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * (C) Copyright 2017 Rockchip Electronics Co., Ltd. + */ + +#include +#include +#include +#include +#include + +int rockchip_get_clk(struct udevice **devp) +{ + return uclass_get_device_by_driver(UCLASS_CLK, + DM_GET_DRIVER(rockchip_px30_cru), devp); +} + +void *rockchip_get_cru(void) +{ + struct px30_clk_priv *priv; + struct udevice *dev; + int ret; + + ret = rockchip_get_clk(&dev); + if (ret) + return ERR_PTR(ret); + + priv = dev_get_priv(dev); + + return priv->cru; +} diff --git a/arch/arm/mach-rockchip/px30/px30.c b/arch/arm/mach-rockchip/px30/px30.c new file mode 100644 index 0000000000..bacdcc0b93 --- /dev/null +++ b/arch/arm/mach-rockchip/px30/px30.c @@ -0,0 +1,248 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2017 Rockchip Electronics Co., Ltd + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct mm_region px30_mem_map[] = { + { + .virt = 0x0UL, + .phys = 0x0UL, + .size = 0xff000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | + PTE_BLOCK_INNER_SHARE + }, { + .virt = 0xff000000UL, + .phys = 0xff000000UL, + .size = 0x01000000UL, + .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | + PTE_BLOCK_NON_SHARE | + PTE_BLOCK_PXN | PTE_BLOCK_UXN + }, { + /* List terminator */ + 0, + } +}; + +struct mm_region *mem_map = px30_mem_map; + +#define PMU_PWRDN_CON 0xff000018 +#define GRF_BASE 0xff140000 +#define CRU_BASE 0xff2b0000 +#define VIDEO_PHY_BASE 0xff2e0000 +#define SERVICE_CORE_ADDR 0xff508000 +#define DDR_FW_BASE 0xff534000 + +#define FW_DDR_CON 0x40 + +#define QOS_PRIORITY 0x08 + +#define QOS_PRIORITY_LEVEL(h, l) ((((h) & 3) << 8) | ((l) & 3)) + +/* GRF_GPIO1CL_IOMUX */ +enum { + GPIO1C1_SHIFT = 4, + GPIO1C1_MASK = 0xf << GPIO1C1_SHIFT, + GPIO1C1_GPIO = 0, + GPIO1C1_UART1_TX, + + GPIO1C0_SHIFT = 0, + GPIO1C0_MASK = 0xf << GPIO1C0_SHIFT, + GPIO1C0_GPIO = 0, + GPIO1C0_UART1_RX, +}; + +/* GRF_GPIO1DL_IOMUX */ +enum { + GPIO1D3_SHIFT = 12, + GPIO1D3_MASK = 0xf << GPIO1D3_SHIFT, + GPIO1D3_GPIO = 0, + GPIO1D3_SDMMC_D1, + GPIO1D3_UART2_RXM0, + + GPIO1D2_SHIFT = 8, + GPIO1D2_MASK = 0xf << GPIO1D2_SHIFT, + GPIO1D2_GPIO = 0, + GPIO1D2_SDMMC_D0, + GPIO1D2_UART2_TXM0, +}; + +/* GRF_GPIO1DH_IOMUX */ +enum { + GPIO1D7_SHIFT = 12, + GPIO1D7_MASK = 0xf << GPIO1D7_SHIFT, + GPIO1D7_GPIO = 0, + GPIO1D7_SDMMC_CMD, + + GPIO1D6_SHIFT = 8, + GPIO1D6_MASK = 0xf << GPIO1D6_SHIFT, + GPIO1D6_GPIO = 0, + GPIO1D6_SDMMC_CLK, + + GPIO1D5_SHIFT = 4, + GPIO1D5_MASK = 0xf << GPIO1D5_SHIFT, + GPIO1D5_GPIO = 0, + GPIO1D5_SDMMC_D3, + + GPIO1D4_SHIFT = 0, + GPIO1D4_MASK = 0xf << GPIO1D4_SHIFT, + GPIO1D4_GPIO = 0, + GPIO1D4_SDMMC_D2, +}; + +/* GRF_GPIO2BH_IOMUX */ +enum { + GPIO2B6_SHIFT = 8, + GPIO2B6_MASK = 0xf << GPIO2B6_SHIFT, + GPIO2B6_GPIO = 0, + GPIO2B6_CIF_D1M0, + GPIO2B6_UART2_RXM1, + + GPIO2B4_SHIFT = 0, + GPIO2B4_MASK = 0xf << GPIO2B4_SHIFT, + GPIO2B4_GPIO = 0, + GPIO2B4_CIF_D0M0, + GPIO2B4_UART2_TXM1, +}; + +/* GRF_GPIO3AL_IOMUX */ +enum { + GPIO3A2_SHIFT = 8, + GPIO3A2_MASK = 0xf << GPIO3A2_SHIFT, + GPIO3A2_GPIO = 0, + GPIO3A2_UART5_TX = 4, + + GPIO3A1_SHIFT = 4, + GPIO3A1_MASK = 0xf << GPIO3A1_SHIFT, + GPIO3A1_GPIO = 0, + GPIO3A1_UART5_RX = 4, +}; + +int arch_cpu_init(void) +{ + static struct px30_grf * const grf = (void *)GRF_BASE; + u32 __maybe_unused val; + +#ifdef CONFIG_SPL_BUILD + /* We do some SoC one time setting here. */ + /* Disable the ddr secure region setting to make it non-secure */ + writel(0x0, DDR_FW_BASE + FW_DDR_CON); + + /* Set cpu qos priority */ + writel(QOS_PRIORITY_LEVEL(1, 1), SERVICE_CORE_ADDR + QOS_PRIORITY); + +#if !defined(CONFIG_DEBUG_UART_BOARD_INIT) || \ + (CONFIG_DEBUG_UART_BASE != 0xff160000) || \ + (CONFIG_DEBUG_UART_CHANNEL != 0) + /* fix sdmmc pinmux if not using uart2-channel0 as debug uart */ + rk_clrsetreg(&grf->gpio1dl_iomux, + GPIO1D3_MASK | GPIO1D2_MASK, + GPIO1D3_SDMMC_D1 << GPIO1D3_SHIFT | + GPIO1D2_SDMMC_D0 << GPIO1D2_SHIFT); + rk_clrsetreg(&grf->gpio1dh_iomux, + GPIO1D7_MASK | GPIO1D6_MASK | GPIO1D5_MASK | GPIO1D4_MASK, + GPIO1D7_SDMMC_CMD << GPIO1D7_SHIFT | + GPIO1D6_SDMMC_CLK << GPIO1D6_SHIFT | + GPIO1D5_SDMMC_D3 << GPIO1D5_SHIFT | + GPIO1D4_SDMMC_D2 << GPIO1D4_SHIFT); +#endif + +#endif + + /* Enable PD_VO (default disable at reset) */ + rk_clrreg(PMU_PWRDN_CON, 1 << 13); + + /* Disable video phy bandgap by default */ + writel(0x82, VIDEO_PHY_BASE + 0x0000); + writel(0x05, VIDEO_PHY_BASE + 0x03ac); + + /* Clear the force_jtag */ + rk_clrreg(&grf->cpu_con[1], 1 << 7); + + return 0; +} + +#ifdef CONFIG_DEBUG_UART_BOARD_INIT +void board_debug_uart_init(void) +{ + static struct px30_grf * const grf = (void *)GRF_BASE; + static struct px30_cru * const cru = (void *)CRU_BASE; + +#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff158000) + /* uart_sel_clk default select 24MHz */ + rk_clrsetreg(&cru->clksel_con[34], + UART1_PLL_SEL_MASK | UART1_DIV_CON_MASK, + UART1_PLL_SEL_24M << UART1_PLL_SEL_SHIFT | 0); + rk_clrsetreg(&cru->clksel_con[35], + UART1_CLK_SEL_MASK, + UART1_CLK_SEL_UART1 << UART1_CLK_SEL_SHIFT); + + rk_clrsetreg(&grf->gpio1cl_iomux, + GPIO1C1_MASK | GPIO1C0_MASK, + GPIO1C1_UART1_TX << GPIO1C1_SHIFT | + GPIO1C0_UART1_RX << GPIO1C0_SHIFT); +#elif defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff178000) + /* uart_sel_clk default select 24MHz */ + rk_clrsetreg(&cru->clksel_con[46], + UART5_PLL_SEL_MASK | UART5_DIV_CON_MASK, + UART5_PLL_SEL_24M << UART5_PLL_SEL_SHIFT | 0); + rk_clrsetreg(&cru->clksel_con[47], + UART5_CLK_SEL_MASK, + UART5_CLK_SEL_UART5 << UART5_CLK_SEL_SHIFT); + + rk_clrsetreg(&grf->gpio3al_iomux, + GPIO3A2_MASK | GPIO3A1_MASK, + GPIO3A2_UART5_TX << GPIO3A2_SHIFT | + GPIO3A1_UART5_RX << GPIO3A1_SHIFT); +#else + /* GRF_IOFUNC_CON0 */ + enum { + CON_IOMUX_UART2SEL_SHIFT = 10, + CON_IOMUX_UART2SEL_MASK = 3 << CON_IOMUX_UART2SEL_SHIFT, + CON_IOMUX_UART2SEL_M0 = 0, + CON_IOMUX_UART2SEL_M1, + CON_IOMUX_UART2SEL_USBPHY, + }; + + /* uart_sel_clk default select 24MHz */ + rk_clrsetreg(&cru->clksel_con[37], + UART2_PLL_SEL_MASK | UART2_DIV_CON_MASK, + UART2_PLL_SEL_24M << UART2_PLL_SEL_SHIFT | 0); + rk_clrsetreg(&cru->clksel_con[38], + UART2_CLK_SEL_MASK, + UART2_CLK_SEL_UART2 << UART2_CLK_SEL_SHIFT); + +#if (CONFIG_DEBUG_UART2_CHANNEL == 1) + /* Enable early UART2 */ + rk_clrsetreg(&grf->iofunc_con0, + CON_IOMUX_UART2SEL_MASK, + CON_IOMUX_UART2SEL_M1 << CON_IOMUX_UART2SEL_SHIFT); + + rk_clrsetreg(&grf->gpio2bh_iomux, + GPIO2B6_MASK | GPIO2B4_MASK, + GPIO2B6_UART2_RXM1 << GPIO2B6_SHIFT | + GPIO2B4_UART2_TXM1 << GPIO2B4_SHIFT); +#else + rk_clrsetreg(&grf->iofunc_con0, + CON_IOMUX_UART2SEL_MASK, + CON_IOMUX_UART2SEL_M0 << CON_IOMUX_UART2SEL_SHIFT); + + rk_clrsetreg(&grf->gpio1dl_iomux, + GPIO1D3_MASK | GPIO1D2_MASK, + GPIO1D3_UART2_RXM0 << GPIO1D3_SHIFT | + GPIO1D2_UART2_TXM0 << GPIO1D2_SHIFT); +#endif /* CONFIG_DEBUG_UART2_CHANNEL == 1 */ + +#endif /* CONFIG_DEBUG_UART_BASE && CONFIG_DEBUG_UART_BASE == ... */ +} +#endif /* CONFIG_DEBUG_UART_BOARD_INIT */ diff --git a/arch/arm/mach-rockchip/px30/syscon_px30.c b/arch/arm/mach-rockchip/px30/syscon_px30.c new file mode 100644 index 0000000000..0331491b40 --- /dev/null +++ b/arch/arm/mach-rockchip/px30/syscon_px30.c @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * (C) Copyright 2017 Rockchip Electronics Co., Ltd + */ + +#include +#include +#include +#include + +static const struct udevice_id px30_syscon_ids[] = { + { .compatible = "rockchip,px30-pmu", .data = ROCKCHIP_SYSCON_PMU }, + { .compatible = "rockchip,px30-pmugrf", .data = ROCKCHIP_SYSCON_PMUGRF }, + { .compatible = "rockchip,px30-grf", .data = ROCKCHIP_SYSCON_GRF }, + { } +}; + +U_BOOT_DRIVER(syscon_px30) = { + .id = UCLASS_SYSCON, + .name = "px30_syscon", + .of_match = px30_syscon_ids, +}; + +#if CONFIG_IS_ENABLED(OF_PLATDATA) +static int px30_syscon_bind_of_platdata(struct udevice *dev) +{ + dev->driver_data = dev->driver->of_match->data; + debug("syscon: %s %d\n", dev->name, (uint)dev->driver_data); + + return 0; +} + +U_BOOT_DRIVER(rockchip_px30_pmu) = { + .name = "rockchip_px30_pmu", + .id = UCLASS_SYSCON, + .of_match = px30_syscon_ids, + .bind = px30_syscon_bind_of_platdata, +}; + +U_BOOT_DRIVER(rockchip_px30_pmugrf) = { + .name = "rockchip_px30_pmugrf", + .id = UCLASS_SYSCON, + .of_match = px30_syscon_ids + 1, + .bind = px30_syscon_bind_of_platdata, +}; + +U_BOOT_DRIVER(rockchip_px30_grf) = { + .name = "rockchip_px30_grf", + .id = UCLASS_SYSCON, + .of_match = px30_syscon_ids + 2, + .bind = px30_syscon_bind_of_platdata, +}; +#endif