From: wdenk Date: Mon, 1 Apr 2002 14:29:03 +0000 (+0000) Subject: Initial revision X-Git-Tag: LABEL_2006_03_12_0025~1149 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=e85390dc1d9c3c942c11bbf003e6c10a73e25ed6;p=oweals%2Fu-boot.git Initial revision --- diff --git a/board/esd/adciop/Makefile b/board/esd/adciop/Makefile new file mode 100644 index 0000000000..d4a4e65099 --- /dev/null +++ b/board/esd/adciop/Makefile @@ -0,0 +1,46 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS = $(BOARD).o flash.o ../common/pci.o + +$(LIB): $(OBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/esd/dasa_sim/Makefile b/board/esd/dasa_sim/Makefile new file mode 100644 index 0000000000..29aaf3b3f2 --- /dev/null +++ b/board/esd/dasa_sim/Makefile @@ -0,0 +1,46 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS = $(BOARD).o flash.o cmd_dasa_sim.o eeprom.o ../common/pci.o + +$(LIB): $(OBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/evb64260/Makefile b/board/evb64260/Makefile new file mode 100644 index 0000000000..31e24df43c --- /dev/null +++ b/board/evb64260/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2001 +# Josh Huber , Mission Critical Linux, Inc. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +SOBJS = misc.o +OBJS = $(BOARD).o flash.o serial.o memory.o pci.o \ + eth.o eth_addrtbl.o mpsc.o i2c.o \ + sdram_init.o zuma_pbb.o intel_flash.o zuma_pbb_mbox.o + + +$(LIB): .depend $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/mousse/Makefile b/board/mousse/Makefile new file mode 100644 index 0000000000..6d9df89a5a --- /dev/null +++ b/board/mousse/Makefile @@ -0,0 +1,40 @@ +# +# (C) Copyright 2001 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS = $(BOARD).o m48t59y.o pci.o flash.o + +$(LIB): .depend $(OBJS) + $(AR) crv $@ $^ + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/musenki/Makefile b/board/musenki/Makefile new file mode 100644 index 0000000000..2613292f49 --- /dev/null +++ b/board/musenki/Makefile @@ -0,0 +1,41 @@ +# +# (C) Copyright 2001 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS = $(BOARD).o flash.o +SOBJS = + +$(LIB): .depend $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/pcippc2/Makefile b/board/pcippc2/Makefile new file mode 100644 index 0000000000..d77110045c --- /dev/null +++ b/board/pcippc2/Makefile @@ -0,0 +1,45 @@ +# +# (C) Copyright 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +COBJS = $(BOARD).o cpc710_pci.o flash.o sconsole.o \ + fpga_serial.o pcippc2_fpga.o cpc710_init_ram.o i2c.o + +AOBJS = + +OBJS = $(COBJS) $(AOBJS) + +$(LIB): .depend $(OBJS) + $(AR) crv $@ $^ + +######################################################################### + +.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c) + $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/pcippc2/cpc710_pci.h b/board/pcippc2/cpc710_pci.h new file mode 100644 index 0000000000..24d0db6345 --- /dev/null +++ b/board/pcippc2/cpc710_pci.h @@ -0,0 +1,51 @@ +/* + * (C) Copyright 2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _CPC710_PCI_H_ +#define _CPC710_PCI_H_ + +#define PCI_MEMORY_PHYS 0x00000000 +#define PCI_MEMORY_BUS 0x80000000 +#define PCI_MEMORY_MAXSIZE 0x20000000 + +#define BRIDGE_CPCI_PHYS 0xff500000 +#define BRIDGE_CPCI_MEM_SIZE 0x08000000 +#define BRIDGE_CPCI_MEM_PHYS 0xf0000000 +#define BRIDGE_CPCI_MEM_BUS 0x00000000 +#define BRIDGE_CPCI_IO_SIZE 0x02000000 +#define BRIDGE_CPCI_IO_PHYS 0xfc000000 +#define BRIDGE_CPCI_IO_BUS 0x00000000 + +#define BRIDGE_LOCAL_PHYS 0xff400000 +#define BRIDGE_LOCAL_MEM_SIZE 0x04000000 +#define BRIDGE_LOCAL_MEM_PHYS 0xf8000000 +#define BRIDGE_LOCAL_MEM_BUS 0x40000000 +#define BRIDGE_LOCAL_IO_SIZE 0x01000000 +#define BRIDGE_LOCAL_IO_PHYS 0xfe000000 +#define BRIDGE_LOCAL_IO_BUS 0x04000000 + +#define BRIDGE(r, x) (BRIDGE_##r##_PHYS + HW_BRIDGE_##x) + +#define PCI_LATENCY_TIMER_VAL 0xff + +#endif diff --git a/board/sandpoint/Makefile b/board/sandpoint/Makefile new file mode 100644 index 0000000000..0a4bf0d789 --- /dev/null +++ b/board/sandpoint/Makefile @@ -0,0 +1,40 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS = $(BOARD).o flash.o + +$(LIB): .depend $(OBJS) + $(AR) crv $@ $^ + +######################################################################### + +.depend: Makefile $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/cpu/mpc824x/Makefile b/cpu/mpc824x/Makefile new file mode 100644 index 0000000000..40447a1637 --- /dev/null +++ b/cpu/mpc824x/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(CPU).a + +START = start.S drivers/i2c/i2c2.o +OBJS = traps.o cpu.o cpu_init.o interrupts.o speed.o \ + drivers/epic/epic1.o drivers/i2c/i2c1.o pci.o + +all: .depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(AR) crv $@ $(OBJS) drivers/i2c/i2c2.o + +######################################################################### + +.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/drivers/ns16550.c b/drivers/ns16550.c new file mode 100644 index 0000000000..6f818d774b --- /dev/null +++ b/drivers/ns16550.c @@ -0,0 +1,56 @@ +/* + * COM1 NS16550 support + * originally from linux source (arch/ppc/boot/ns16550.c) + * modified to use CFG_ISA_MEM and new defines + */ + +#include + +#ifdef CFG_NS16550 + +#include + +#define LCRVAL LCR_8N1 /* 8 data, 1 stop, no parity */ +#define MCRVAL (MCR_DTR | MCR_RTS) /* RTS/DTR */ +#define FCRVAL (FCR_FIFO_EN | FCR_RXSR | FCR_TXSR) /* Clear & enable FIFOs */ + +void NS16550_init (NS16550_t com_port, int baud_divisor) +{ + com_port->ier = 0x00; + com_port->lcr = LCR_BKSE | LCRVAL; + com_port->dll = baud_divisor & 0xff; + com_port->dlm = (baud_divisor >> 8) & 0xff; + com_port->lcr = LCRVAL; + com_port->mcr = MCRVAL; + com_port->fcr = FCRVAL; +} + +void NS16550_reinit (NS16550_t com_port, int baud_divisor) +{ + com_port->ier = 0x00; + com_port->lcr = LCR_BKSE; + com_port->dll = baud_divisor & 0xff; + com_port->dlm = (baud_divisor >> 8) & 0xff; + com_port->lcr = LCRVAL; + com_port->mcr = MCRVAL; + com_port->fcr = FCRVAL; +} + +void NS16550_putc (NS16550_t com_port, char c) +{ + while ((com_port->lsr & LSR_THRE) == 0); + com_port->thr = c; +} + +char NS16550_getc (NS16550_t com_port) +{ + while ((com_port->lsr & LSR_DR) == 0); + return (com_port->rbr); +} + +int NS16550_tstc (NS16550_t com_port) +{ + return ((com_port->lsr & LSR_DR) != 0); +} + +#endif diff --git a/include/405gp_pci.h b/include/405gp_pci.h new file mode 100644 index 0000000000..3c1adec19c --- /dev/null +++ b/include/405gp_pci.h @@ -0,0 +1,52 @@ +#ifndef _405GP_PCI_H +#define _405GP_PCI_H + +/*----------------------------------------------------------------------------+ +| 405GP PCI core memory map defines. ++----------------------------------------------------------------------------*/ +#define MIN_PCI_MEMADDR1 0x80000000 +#define MIN_PCI_MEMADDR2 0x00000000 +#define MIN_PLB_PCI_IOADDR 0xE8000000 /* PLB side of PCI I/O address space */ +#define MIN_PCI_PCI_IOADDR 0x00000000 /* PCI side of PCI I/O address space */ +#define MAX_PCI_DEVICES 32 + +/*----------------------------------------------------------------------------+ +| Defines for the 405GP PCI Config address and data registers followed by +| defines for the standard PCI device configuration header. ++----------------------------------------------------------------------------*/ +#define PCICFGADR 0xEEC00000 +#define PCICFGDATA 0xEEC00004 + +#define PCIBUSNUM 0x40 /* 405GP specific parameters */ +#define PCISUBBUSNUM 0x41 +#define PCIDISCOUNT 0x42 +#define PCIBRDGOPT1 0x4A +#define PCIBRDGOPT2 0x60 + +/*----------------------------------------------------------------------------+ +| Defines for 405GP PCI Master local configuration regs. ++----------------------------------------------------------------------------*/ +#define PMM0LA 0xEF400000 +#define PMM0MA 0xEF400004 +#define PMM0PCILA 0xEF400008 +#define PMM0PCIHA 0xEF40000C +#define PMM1LA 0xEF400010 +#define PMM1MA 0xEF400014 +#define PMM1PCILA 0xEF400018 +#define PMM1PCIHA 0xEF40001C +#define PMM2LA 0xEF400020 +#define PMM2MA 0xEF400024 +#define PMM2PCILA 0xEF400028 +#define PMM2PCIHA 0xEF40002C + +/*----------------------------------------------------------------------------+ +| Defines for 405GP PCI Target local configuration regs. ++----------------------------------------------------------------------------*/ +#define PTM1MS 0xEF400030 +#define PTM1LA 0xEF400034 +#define PTM2MS 0xEF400038 +#define PTM2LA 0xEF40003C + +#define PCIDEVID_405GP 0x0 + +#endif diff --git a/include/ns87308.h b/include/ns87308.h new file mode 100644 index 0000000000..feeb940703 --- /dev/null +++ b/include/ns87308.h @@ -0,0 +1,250 @@ +/* + * (C) Copyright 2000 + * Rob Taylor, Flying Pig Systems. robt@flyingpig.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _NS87308_H_ +#define _NS87308_H_ + +#include + +/* Note: I couldn't find a full data sheet for the ns87308, but the ns87307 seems to be pretty + functionally- (and pin-) equivalent to the 87308, but the 308 has better ir support. */ + +void initialise_ns87308(void); + +/* + * The following struct represents the GPIO registers on the NS87308/NS97307 + */ +struct GPIO +{ + unsigned char dta1; /* 0 data port 1 */ + unsigned char dir1; /* 1 direction port 1 */ + unsigned char out1; /* 2 output type port 1 */ + unsigned char puc1; /* 3 pull-up control port 1 */ + unsigned char dta2; /* 4 data port 2 */ + unsigned char dir2; /* 5 direction port 2 */ + unsigned char out2; /* 6 output type port 2 */ + unsigned char puc2; /* 7 pull-up control port 2 */ +}; + +/* + * The following represents the power management registers on the NS87308/NS97307 + */ +#define PWM_FER1 0 /* 0 function enable reg. 1 */ +#define PWM_FER2 1 /* 1 function enable reg. 2 */ +#define PWM_PMC1 2 /* 2 power mgmt. control 1 */ +#define PWM_PMC2 3 /* 3 power mgmt. control 2 */ +#define PWM_PMC3 4 /* 4 power mgmt. control 3 */ +#define PWM_WDTO 5 /* 5 watchdog time-out */ +#define PWM_WDCF 6 /* 6 watchdog config. */ +#define PWM_WDST 7 /* 7 watchdog status */ + +/*PNP config registers: + * these depend on the stated of BADDR1 and BADDR0 on startup + * so there's three versions here with the last two digits indicating + * for which configuration their valid + * the 1st of the two digits indicates the state of BADDR1 + * the 2st of the two digits indicates the state of BADDR0 + */ + + +#define IO_INDEX_OFFSET_0x 0x0279 /* full PnP isa Mode */ +#define IO_INDEX_OFFSET_10 0x015C /* PnP motherboard mode */ +#define IO_INDEX_OFFSET_11 0x002E /* PnP motherboard mode */ +#define IO_DATA_OFFSET_0x 0x0A79 /* full PnP isa Mode */ +#define IO_DATA_OFFSET_10 0x015D /* PnP motherboard mode */ +#define IO_DATA_OFFSET_11 0x002F /* PnP motherboard mode */ + +#if defined(CFG_NS87308_BADDR_0x) +#define IO_INDEX (CFG_ISA_IO + IO_INDEX_OFFSET_0x) +#define IO_DATA (CFG_ISA_IO + IO_DATA_OFFSET_0x) +#elif defined(CFG_NS87308_BADDR_10) +#define IO_INDEX (CFG_ISA_IO + IO_INDEX_OFFSET_10) +#define IO_DATA (CFG_ISA_IO + IO_DATA_OFFSET_10) +#elif defined(CFG_NS87308_BADDR_11) +#define IO_INDEX (CFG_ISA_IO + IO_INDEX_OFFSET_11) +#define IO_DATA (CFG_ISA_IO + IO_DATA_OFFSET_11) +#endif + +/* PnP register definitions */ + +#define SET_RD_DATA_PORT 0x00 +#define SERIAL_ISOLATION 0x01 +#define CONFIG_CONTROL 0x02 +#define WAKE_CSN 0x03 +#define RES_DATA 0x04 +#define STATUS 0x05 +#define SET_CSN 0x06 +#define LOGICAL_DEVICE 0x07 + +/*vendor defined values */ +#define SID_REG 0x20 +#define SUPOERIO_CONF1 0x21 +#define SUPOERIO_CONF2 0x22 +#define PGCS_INDEX 0x23 +#define PGCS_DATA 0x24 + +/* values above 30 are different for each logical device + but I can't be arsed to enter them all. the ones here + are pretty consistent between all logical devices + feel free to correct the situation if you want.. ;) + */ +#define ACTIVATE 0x30 +#define ACTIVATE_OFF 0x00 +#define ACTIVATE_ON 0x01 + +#define BASE_ADDR_HIGH 0x60 +#define BASE_ADDR_LOW 0x61 +#define LUN_CONFIG_REG 0xF0 +#define DBASE_HIGH 0x60 /* SIO KBC data base address, 15:8 */ +#define DBASE_LOW 0x61 /* SIO KBC data base address, 7:0 */ +#define CBASE_HIGH 0x62 /* SIO KBC command base addr, 15:8 */ +#define CBASE_LOW 0x63 /* SIO KBC command base addr, 7:0 */ + +/* the logical devices*/ +#define LDEV_KBC1 0x00 /* 2 devices for keyboard and mouse controller*/ +#define LDEV_KBC2 0x01 +#define LDEV_MOUSE 0x01 +#define LDEV_RTC_APC 0x02 /*Real Time Clock and Advanced Power Control*/ +#define LDEV_FDC 0x03 /*floppy disk controller*/ +#define LDEV_PARP 0x04 /*Parallel port*/ +#define LDEV_UART2 0x05 +#define LDEV_UART1 0x06 +#define LDEV_GPIO 0x07 /*General Purpose IO and chip select output signals*/ +#define LDEV_POWRMAN 0x08 /*Power Managment*/ + +#define CFG_NS87308_KBC1 (1 << LDEV_KBC1) +#define CFG_NS87308_KBC2 (1 << LDEV_KBC2) +#define CFG_NS87308_MOUSE (1 << LDEV_MOUSE) +#define CFG_NS87308_RTC_APC (1 << LDEV_RTC_APC) +#define CFG_NS87308_FDC (1 << LDEV_FDC) +#define CFG_NS87308_PARP (1 << LDEV_PARP) +#define CFG_NS87308_UART2 (1 << LDEV_UART2) +#define CFG_NS87308_UART1 (1 << LDEV_UART1) +#define CFG_NS87308_GPIO (1 << LDEV_GPIO) +#define CFG_NS87308_POWRMAN (1 << LDEV_POWRMAN) + +/*some functions and macro's for doing configuration */ + +static inline void read_pnp_config(unsigned char index, unsigned char *data) +{ + pci_writeb(index,IO_INDEX); + pci_readb(IO_DATA, *data); +} + +static inline void write_pnp_config(unsigned char index, unsigned char data) +{ + pci_writeb(index,IO_INDEX); + pci_writeb(data, IO_DATA); +} + +static inline void pnp_set_device(unsigned char dev) +{ + write_pnp_config(LOGICAL_DEVICE, dev); +} + +static inline void write_pm_reg(unsigned short base, unsigned char index, unsigned char data) +{ + pci_writeb(index, CFG_ISA_IO + base); + eieio(); + pci_writeb(data, CFG_ISA_IO + base + 1); +} + +/*void write_pnp_config(unsigned char index, unsigned char data); +void pnp_set_device(unsigned char dev); +*/ + +#define PNP_SET_DEVICE_BASE(dev,base) \ + pnp_set_device(dev); \ + write_pnp_config(ACTIVATE, ACTIVATE_OFF); \ + write_pnp_config(BASE_ADDR_HIGH, ((base) >> 8) & 0xff ); \ + write_pnp_config(BASE_ADDR_LOW, (base) &0xff); \ + write_pnp_config(ACTIVATE, ACTIVATE_ON); + +#define PNP_ACTIVATE_DEVICE(dev) \ + pnp_set_device(dev); \ + write_pnp_config(ACTIVATE, ACTIVATE_ON); + +#define PNP_DEACTIVATE_DEVICE(dev) \ + pnp_set_device(dev); \ + write_pnp_config(ACTIVATE, ACTIVATE_OFF); + + +static inline void write_pgcs_config(unsigned char index, unsigned char data) +{ + write_pnp_config(PGCS_INDEX, index); + write_pnp_config(PGCS_DATA, data); +} + +/* these macrose configure the 3 CS lines + on the sandpoint board these controll NVRAM + CS0 is connected to NVRAMCS + CS1 is connected to NVRAMAS0 + CS2 is connected to NVRAMAS1 + */ +#define PGCS_CS_ASSERT_ON_WRITE 0x10 +#define PGCS_CS_ASSERT_ON_READ 0x20 + +#define PNP_PGCS_CSLINE_BASE(cs, base) \ + write_pgcs_config((cs) << 2, ((base) >> 8) & 0xff ); \ + write_pgcs_config(((cs) << 2) + 1, (base) & 0xff ); + +#define PNP_PGCS_CSLINE_CONF(cs, conf) \ + write_pgcs_config(((cs) << 2) + 2, (conf) ); + + +/* The following sections are for 87308 extensions to the standard compoents it emulates */ + +/* extensions to 16550*/ + +#define MCR_MDSL_MSK 0xe0 /*mode select mask*/ +#define MCR_MDSL_UART 0x00 /*uart, default*/ +#define MCR_MDSL_SHRPIR 0x02 /*Sharp IR*/ +#define MCR_MDSL_SIR 0x03 /*SIR*/ +#define MCR_MDSL_CIR 0x06 /*Consumer IR*/ + +#define FCR_TXFTH0 0x10 /* these bits control threshod of data level in fifo */ +#define FCR_TXFTH1 0x20 /* for interrupt trigger */ + +/* + * Default NS87308 configuration + */ +#ifndef CFG_NS87308_KBC1_BASE +#define CFG_NS87308_KBC1_BASE 0x0060 +#endif +#ifndef CFG_NS87308_RTC_BASE +#define CFG_NS87308_RTC_BASE 0x0070 +#endif +#ifndef CFG_NS87308_FDC_BASE +#define CFG_NS87308_FDC_BASE 0x03F0 +#endif +#ifndef CFG_NS87308_LPT_BASE +#define CFG_NS87308_LPT_BASE 0x0278 +#endif +#ifndef CFG_NS87308_UART1_BASE +#define CFG_NS87308_UART1_BASE 0x03F8 +#endif +#ifndef CFG_NS87308_UART2_BASE +#define CFG_NS87308_UART2_BASE 0x02F8 +#endif + +#endif /*_NS87308_H_*/ diff --git a/include/scsi.h b/include/scsi.h new file mode 100644 index 0000000000..8929318925 --- /dev/null +++ b/include/scsi.h @@ -0,0 +1,215 @@ +/* + * (C) Copyright 2001 + * Denis Peter, MPL AG Switzerland + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + #ifndef _SCSI_H + #define _SCSI_H + +typedef struct SCSI_cmd_block{ + unsigned char cmd[16]; /* command */ + unsigned char sense_buf[64]; /* for request sense */ + unsigned char status; /* SCSI Status */ + unsigned char target; /* Target ID */ + unsigned char lun; /* Target LUN */ + unsigned char cmdlen; /* command len */ + unsigned long datalen; /* Total data length */ + unsigned char * pdata; /* pointer to data */ + unsigned char msgout[12]; /* Messge out buffer (NOT USED) */ + unsigned char msgin[12]; /* Message in buffer */ + unsigned char sensecmdlen; /* Sense command len */ + unsigned long sensedatalen; /* Sense data len */ + unsigned char sensecmd[6]; /* Sense command */ + unsigned long contr_stat; /* Controller Status */ + unsigned long trans_bytes; /* tranfered bytes */ + + unsigned int priv; +}ccb; + +/*----------------------------------------------------------- +** +** SCSI constants. +** +**----------------------------------------------------------- +*/ + +/* +** Messages +*/ + +#define M_COMPLETE (0x00) +#define M_EXTENDED (0x01) +#define M_SAVE_DP (0x02) +#define M_RESTORE_DP (0x03) +#define M_DISCONNECT (0x04) +#define M_ID_ERROR (0x05) +#define M_ABORT (0x06) +#define M_REJECT (0x07) +#define M_NOOP (0x08) +#define M_PARITY (0x09) +#define M_LCOMPLETE (0x0a) +#define M_FCOMPLETE (0x0b) +#define M_RESET (0x0c) +#define M_ABORT_TAG (0x0d) +#define M_CLEAR_QUEUE (0x0e) +#define M_INIT_REC (0x0f) +#define M_REL_REC (0x10) +#define M_TERMINATE (0x11) +#define M_SIMPLE_TAG (0x20) +#define M_HEAD_TAG (0x21) +#define M_ORDERED_TAG (0x22) +#define M_IGN_RESIDUE (0x23) +#define M_IDENTIFY (0x80) + +#define M_X_MODIFY_DP (0x00) +#define M_X_SYNC_REQ (0x01) +#define M_X_WIDE_REQ (0x03) +#define M_X_PPR_REQ (0x04) + + +/* +** Status +*/ + +#define S_GOOD (0x00) +#define S_CHECK_COND (0x02) +#define S_COND_MET (0x04) +#define S_BUSY (0x08) +#define S_INT (0x10) +#define S_INT_COND_MET (0x14) +#define S_CONFLICT (0x18) +#define S_TERMINATED (0x20) +#define S_QUEUE_FULL (0x28) +#define S_ILLEGAL (0xff) +#define S_SENSE (0x80) + +/* + * Sense_keys + */ + +#define SENSE_NO_SENSE 0x0 +#define SENSE_RECOVERED_ERROR 0x1 +#define SENSE_NOT_READY 0x2 +#define SENSE_MEDIUM_ERROR 0x3 +#define SENSE_HARDWARE_ERROR 0x4 +#define SENSE_ILLEGAL_REQUEST 0x5 +#define SENSE_UNIT_ATTENTION 0x6 +#define SENSE_DATA_PROTECT 0x7 +#define SENSE_BLANK_CHECK 0x8 +#define SENSE_VENDOR_SPECIFIC 0x9 +#define SENSE_COPY_ABORTED 0xA +#define SENSE_ABORTED_COMMAND 0xB +#define SENSE_VOLUME_OVERFLOW 0xD +#define SENSE_MISCOMPARE 0xE + + +#define SCSI_CHANGE_DEF 0x40 /* Change Definition (Optional) */ +#define SCSI_COMPARE 0x39 /* Compare (O) */ +#define SCSI_COPY 0x18 /* Copy (O) */ +#define SCSI_COP_VERIFY 0x3A /* Copy and Verify (O) */ +#define SCSI_INQUIRY 0x12 /* Inquiry (MANDATORY) */ +#define SCSI_LOG_SELECT 0x4C /* Log Select (O) */ +#define SCSI_LOG_SENSE 0x4D /* Log Sense (O) */ +#define SCSI_MODE_SEL6 0x15 /* Mode Select 6-byte (Device Specific) */ +#define SCSI_MODE_SEL10 0x55 /* Mode Select 10-byte (Device Specific) */ +#define SCSI_MODE_SEN6 0x1A /* Mode Sense 6-byte (Device Specific) */ +#define SCSI_MODE_SEN10 0x5A /* Mode Sense 10-byte (Device Specific) */ +#define SCSI_READ_BUFF 0x3C /* Read Buffer (O) */ +#define SCSI_REQ_SENSE 0x03 /* Request Sense (MANDATORY) */ +#define SCSI_SEND_DIAG 0x1D /* Send Diagnostic (O) */ +#define SCSI_TST_U_RDY 0x00 /* Test Unit Ready (MANDATORY) */ +#define SCSI_WRITE_BUFF 0x3B /* Write Buffer (O) */ +/*************************************************************************** + * %%% Commands Unique to Direct Access Devices %%% + ***************************************************************************/ +#define SCSI_COMPARE 0x39 /* Compare (O) */ +#define SCSI_FORMAT 0x04 /* Format Unit (MANDATORY) */ +#define SCSI_LCK_UN_CAC 0x36 /* Lock Unlock Cache (O) */ +#define SCSI_PREFETCH 0x34 /* Prefetch (O) */ +#define SCSI_MED_REMOVL 0x1E /* Prevent/Allow medium Removal (O) */ +#define SCSI_READ6 0x08 /* Read 6-byte (MANDATORY) */ +#define SCSI_READ10 0x28 /* Read 10-byte (MANDATORY) */ +#define SCSI_RD_CAPAC 0x25 /* Read Capacity (MANDATORY) */ +#define SCSI_RD_DEFECT 0x37 /* Read Defect Data (O) */ +#define SCSI_READ_LONG 0x3E /* Read Long (O) */ +#define SCSI_REASS_BLK 0x07 /* Reassign Blocks (O) */ +#define SCSI_RCV_DIAG 0x1C /* Receive Diagnostic Results (O) */ +#define SCSI_RELEASE 0x17 /* Release Unit (MANDATORY) */ +#define SCSI_REZERO 0x01 /* Rezero Unit (O) */ +#define SCSI_SRCH_DAT_E 0x31 /* Search Data Equal (O) */ +#define SCSI_SRCH_DAT_H 0x30 /* Search Data High (O) */ +#define SCSI_SRCH_DAT_L 0x32 /* Search Data Low (O) */ +#define SCSI_SEEK6 0x0B /* Seek 6-Byte (O) */ +#define SCSI_SEEK10 0x2B /* Seek 10-Byte (O) */ +#define SCSI_SEND_DIAG 0x1D /* Send Diagnostics (MANDATORY) */ +#define SCSI_SET_LIMIT 0x33 /* Set Limits (O) */ +#define SCSI_START_STP 0x1B /* Start/Stop Unit (O) */ +#define SCSI_SYNC_CACHE 0x35 /* Synchronize Cache (O) */ +#define SCSI_VERIFY 0x2F /* Verify (O) */ +#define SCSI_WRITE6 0x0A /* Write 6-Byte (MANDATORY) */ +#define SCSI_WRITE10 0x2A /* Write 10-Byte (MANDATORY) */ +#define SCSI_WRT_VERIFY 0x2E /* Write and Verify (O) */ +#define SCSI_WRITE_LONG 0x3F /* Write Long (O) */ +#define SCSI_WRITE_SAME 0x41 /* Write Same (O) */ + + +/**************************************************************************** + * decleration of functions which have to reside in the LowLevel Part Driver + */ + +void scsi_print_error(ccb *pccb); +int scsi_exec(ccb *pccb); +void scsi_bus_reset(void); +void scsi_low_level_init(int busdevfunc); + + +/*************************************************************************** + * functions residing inside cmd_scsi.c + */ +void scsi_init(void); + + + +#define SCSI_IDENTIFY 0xC0 /* not used */ + +/* Hardware errors */ +#define SCSI_SEL_TIME_OUT 0x00000101 /* Selection time out */ +#define SCSI_HNS_TIME_OUT 0x00000102 /* Handshake */ +#define SCSI_MA_TIME_OUT 0x00000103 /* Phase error */ +#define SCSI_UNEXP_DIS 0x00000104 /* unexpected disconnect */ + +#define SCSI_INT_STATE 0x00010000 /* unknown Interrupt number is stored in 16 LSB */ + + + +#ifndef TRUE +#define TRUE 1 +#endif +#ifndef FALSE +#define FALSE 0 +#endif + + + + + +#endif /* _SCSI_H */ + diff --git a/include/sym53c8xx.h b/include/sym53c8xx.h new file mode 100644 index 0000000000..821e1f85a4 --- /dev/null +++ b/include/sym53c8xx.h @@ -0,0 +1,583 @@ +/* + * (C) Copyright 2001 + * Denis Peter, MPL AG Switzerland + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * + * Most of these definitions are derived from + * linux/drivers/scsi/sym53c8xx_defs.h + * + */ + +#ifndef _SYM53C8XX_DEFS_H +#define _SYM53C8XX_DEFS_H + + +#define SCNTL0 0x00 /* full arb., ena parity, par->ATN */ + +#define SCNTL1 0x01 /* no reset */ + #define ISCON 0x10 /* connected to scsi */ + #define CRST 0x08 /* force reset */ + #define IARB 0x02 /* immediate arbitration */ + +#define SCNTL2 0x02 /* no disconnect expected */ + #define SDU 0x80 /* cmd: disconnect will raise error */ + #define CHM 0x40 /* sta: chained mode */ + #define WSS 0x08 /* sta: wide scsi send [W]*/ + #define WSR 0x01 /* sta: wide scsi received [W]*/ + +#define SCNTL3 0x03 /* cnf system clock dependent */ + #define EWS 0x08 /* cmd: enable wide scsi [W]*/ + #define ULTRA 0x80 /* cmd: ULTRA enable */ + /* bits 0-2, 7 rsvd for C1010 */ + +#define SCID 0x04 /* cnf host adapter scsi address */ + #define RRE 0x40 /* r/w:e enable response to resel. */ + #define SRE 0x20 /* r/w:e enable response to select */ + +#define SXFER 0x05 /* ### Sync speed and count */ + /* bits 6-7 rsvd for C1010 */ + +#define SDID 0x06 /* ### Destination-ID */ + +#define GPREG 0x07 /* ??? IO-Pins */ + +#define SFBR 0x08 /* ### First byte in phase */ + +#define SOCL 0x09 + #define CREQ 0x80 /* r/w: SCSI-REQ */ + #define CACK 0x40 /* r/w: SCSI-ACK */ + #define CBSY 0x20 /* r/w: SCSI-BSY */ + #define CSEL 0x10 /* r/w: SCSI-SEL */ + #define CATN 0x08 /* r/w: SCSI-ATN */ + #define CMSG 0x04 /* r/w: SCSI-MSG */ + #define CC_D 0x02 /* r/w: SCSI-C_D */ + #define CI_O 0x01 /* r/w: SCSI-I_O */ + +#define SSID 0x0a + +#define SBCL 0x0b + +#define DSTAT 0x0c + #define DFE 0x80 /* sta: dma fifo empty */ + #define MDPE 0x40 /* int: master data parity error */ + #define BF 0x20 /* int: script: bus fault */ + #define ABRT 0x10 /* int: script: command aborted */ + #define SSI 0x08 /* int: script: single step */ + #define SIR 0x04 /* int: script: interrupt instruct. */ + #define IID 0x01 /* int: script: illegal instruct. */ + +#define SSTAT0 0x0d + #define ILF 0x80 /* sta: data in SIDL register lsb */ + #define ORF 0x40 /* sta: data in SODR register lsb */ + #define OLF 0x20 /* sta: data in SODL register lsb */ + #define AIP 0x10 /* sta: arbitration in progress */ + #define LOA 0x08 /* sta: arbitration lost */ + #define WOA 0x04 /* sta: arbitration won */ + #define IRST 0x02 /* sta: scsi reset signal */ + #define SDP 0x01 /* sta: scsi parity signal */ + +#define SSTAT1 0x0e + #define FF3210 0xf0 /* sta: bytes in the scsi fifo */ + +#define SSTAT2 0x0f + #define ILF1 0x80 /* sta: data in SIDL register msb[W]*/ + #define ORF1 0x40 /* sta: data in SODR register msb[W]*/ + #define OLF1 0x20 /* sta: data in SODL register msb[W]*/ + #define DM 0x04 /* sta: DIFFSENS mismatch (895/6 only) */ + #define LDSC 0x02 /* sta: disconnect & reconnect */ + +#define DSA 0x10 /* --> Base page */ +#define DSA1 0x11 +#define DSA2 0x12 +#define DSA3 0x13 + +#define ISTAT 0x14 /* --> Main Command and status */ + #define CABRT 0x80 /* cmd: abort current operation */ + #define SRST 0x40 /* mod: reset chip */ + #define SIGP 0x20 /* r/w: message from host to ncr */ + #define SEM 0x10 /* r/w: message between host + ncr */ + #define CON 0x08 /* sta: connected to scsi */ + #define INTF 0x04 /* sta: int on the fly (reset by wr)*/ + #define SIP 0x02 /* sta: scsi-interrupt */ + #define DIP 0x01 /* sta: host/script interrupt */ + + +#define CTEST0 0x18 +#define CTEST1 0x19 +#define CTEST2 0x1a + #define CSIGP 0x40 + /* bits 0-2,7 rsvd for C1010 */ + +#define CTEST3 0x1b + #define FLF 0x08 /* cmd: flush dma fifo */ + #define CLF 0x04 /* cmd: clear dma fifo */ + #define FM 0x02 /* mod: fetch pin mode */ + #define WRIE 0x01 /* mod: write and invalidate enable */ + /* bits 4-7 rsvd for C1010 */ + +#define DFIFO 0x20 +#define CTEST4 0x21 + #define BDIS 0x80 /* mod: burst disable */ + #define MPEE 0x08 /* mod: master parity error enable */ + +#define CTEST5 0x22 + #define DFS 0x20 /* mod: dma fifo size */ + /* bits 0-1, 3-7 rsvd for C1010 */ +#define CTEST6 0x23 + +#define DBC 0x24 /* ### Byte count and command */ +#define DNAD 0x28 /* ### Next command register */ +#define DSP 0x2c /* --> Script Pointer */ +#define DSPS 0x30 /* --> Script pointer save/opcode#2 */ + +#define SCRATCHA 0x34 /* Temporary register a */ +#define SCRATCHA1 0x35 +#define SCRATCHA2 0x36 +#define SCRATCHA3 0x37 + +#define DMODE 0x38 + #define BL_2 0x80 /* mod: burst length shift value +2 */ + #define BL_1 0x40 /* mod: burst length shift value +1 */ + #define ERL 0x08 /* mod: enable read line */ + #define ERMP 0x04 /* mod: enable read multiple */ + #define BOF 0x02 /* mod: burst op code fetch */ + #define MAN 0x01 /* mod: manual start */ + +#define DIEN 0x39 +#define SBR 0x3a + +#define DCNTL 0x3b /* --> Script execution control */ + #define CLSE 0x80 /* mod: cache line size enable */ + #define PFF 0x40 /* cmd: pre-fetch flush */ + #define PFEN 0x20 /* mod: pre-fetch enable */ + #define SSM 0x10 /* mod: single step mode */ + #define IRQM 0x08 /* mod: irq mode (1 = totem pole !) */ + #define STD 0x04 /* cmd: start dma mode */ + #define IRQD 0x02 /* mod: irq disable */ + #define NOCOM 0x01 /* cmd: protect sfbr while reselect */ + /* bits 0-1 rsvd for C1010 */ + +#define ADDER 0x3c + +#define SIEN 0x40 /* -->: interrupt enable */ +#define SIST 0x42 /* <--: interrupt status */ + #define SBMC 0x1000/* sta: SCSI Bus Mode Change (895/6 only) */ + #define STO 0x0400/* sta: timeout (select) */ + #define GEN 0x0200/* sta: timeout (general) */ + #define HTH 0x0100/* sta: timeout (handshake) */ + #define MA 0x80 /* sta: phase mismatch */ + #define CMP 0x40 /* sta: arbitration complete */ + #define SEL 0x20 /* sta: selected by another device */ + #define RSL 0x10 /* sta: reselected by another device*/ + #define SGE 0x08 /* sta: gross error (over/underflow)*/ + #define UDC 0x04 /* sta: unexpected disconnect */ + #define RST 0x02 /* sta: scsi bus reset detected */ + #define PAR 0x01 /* sta: scsi parity error */ + +#define SLPAR 0x44 +#define SWIDE 0x45 +#define MACNTL 0x46 +#define GPCNTL 0x47 +#define STIME0 0x48 /* cmd: timeout for select&handshake*/ +#define STIME1 0x49 /* cmd: timeout user defined */ +#define RESPID 0x4a /* sta: Reselect-IDs */ + +#define STEST0 0x4c + +#define STEST1 0x4d + #define SCLK 0x80 /* Use the PCI clock as SCSI clock */ + #define DBLEN 0x08 /* clock doubler running */ + #define DBLSEL 0x04 /* clock doubler selected */ + + +#define STEST2 0x4e + #define ROF 0x40 /* reset scsi offset (after gross error!) */ + #define EXT 0x02 /* extended filtering */ + +#define STEST3 0x4f + #define TE 0x80 /* c: tolerAnt enable */ + #define HSC 0x20 /* c: Halt SCSI Clock */ + #define CSF 0x02 /* c: clear scsi fifo */ + +#define SIDL 0x50 /* Lowlevel: latched from scsi data */ +#define STEST4 0x52 + #define SMODE 0xc0 /* SCSI bus mode (895/6 only) */ + #define SMODE_HVD 0x40 /* High Voltage Differential */ + #define SMODE_SE 0x80 /* Single Ended */ + #define SMODE_LVD 0xc0 /* Low Voltage Differential */ + #define LCKFRQ 0x20 /* Frequency Lock (895/6 only) */ + /* bits 0-5 rsvd for C1010 */ + +#define SODL 0x54 /* Lowlevel: data out to scsi data */ + +#define SBDL 0x58 /* Lowlevel: data from scsi data */ + + + + +/*----------------------------------------------------------- +** +** Utility macros for the script. +** +**----------------------------------------------------------- +*/ + +#define REG(r) (r) + +/*----------------------------------------------------------- +** +** SCSI phases +** +** DT phases illegal for ncr driver. +** +**----------------------------------------------------------- +*/ + +#define SCR_DATA_OUT 0x00000000 +#define SCR_DATA_IN 0x01000000 +#define SCR_COMMAND 0x02000000 +#define SCR_STATUS 0x03000000 +#define SCR_DT_DATA_OUT 0x04000000 +#define SCR_DT_DATA_IN 0x05000000 +#define SCR_MSG_OUT 0x06000000 +#define SCR_MSG_IN 0x07000000 + +#define SCR_ILG_OUT 0x04000000 +#define SCR_ILG_IN 0x05000000 + +/*----------------------------------------------------------- +** +** Data transfer via SCSI. +** +**----------------------------------------------------------- +** +** MOVE_ABS (LEN) +** <> +** +** MOVE_IND (LEN) +** <> +** +** MOVE_TBL +** <> +** +**----------------------------------------------------------- +*/ + +#define OPC_MOVE 0x08000000 + +#define SCR_MOVE_ABS(l) ((0x00000000 | OPC_MOVE) | (l)) +#define SCR_MOVE_IND(l) ((0x20000000 | OPC_MOVE) | (l)) +#define SCR_MOVE_TBL (0x10000000 | OPC_MOVE) + +#define SCR_CHMOV_ABS(l) ((0x00000000) | (l)) +#define SCR_CHMOV_IND(l) ((0x20000000) | (l)) +#define SCR_CHMOV_TBL (0x10000000) + + +/*----------------------------------------------------------- +** +** Selection +** +**----------------------------------------------------------- +** +** SEL_ABS | SCR_ID (0..15) [ | REL_JMP] +** <> +** +** SEL_TBL | << dnad_offset>> [ | REL_JMP] +** <> +** +**----------------------------------------------------------- +*/ + +#define SCR_SEL_ABS 0x40000000 +#define SCR_SEL_ABS_ATN 0x41000000 +#define SCR_SEL_TBL 0x42000000 +#define SCR_SEL_TBL_ATN 0x43000000 + + +#define SCR_JMP_REL 0x04000000 +#define SCR_ID(id) (((unsigned long)(id)) << 16) + +/*----------------------------------------------------------- +** +** Waiting for Disconnect or Reselect +** +**----------------------------------------------------------- +** +** WAIT_DISC +** dummy: <> +** +** WAIT_RESEL +** <> +** +**----------------------------------------------------------- +*/ + +#define SCR_WAIT_DISC 0x48000000 +#define SCR_WAIT_RESEL 0x50000000 + +/*----------------------------------------------------------- +** +** Bit Set / Reset +** +**----------------------------------------------------------- +** +** SET (flags {|.. }) +** +** CLR (flags {|.. }) +** +**----------------------------------------------------------- +*/ + +#define SCR_SET(f) (0x58000000 | (f)) +#define SCR_CLR(f) (0x60000000 | (f)) + +#define SCR_CARRY 0x00000400 +#define SCR_TRG 0x00000200 +#define SCR_ACK 0x00000040 +#define SCR_ATN 0x00000008 + + + + +/*----------------------------------------------------------- +** +** Memory to memory move +** +**----------------------------------------------------------- +** +** COPY (bytecount) +** << source_address >> +** << destination_address >> +** +** SCR_COPY sets the NO FLUSH option by default. +** SCR_COPY_F does not set this option. +** +** For chips which do not support this option, +** ncr_copy_and_bind() will remove this bit. +**----------------------------------------------------------- +*/ + +#define SCR_NO_FLUSH 0x01000000 + +#define SCR_COPY(n) (0xc0000000 | SCR_NO_FLUSH | (n)) +#define SCR_COPY_F(n) (0xc0000000 | (n)) + +/*----------------------------------------------------------- +** +** Register move and binary operations +** +**----------------------------------------------------------- +** +** SFBR_REG (reg, op, data) reg = SFBR op data +** << 0 >> +** +** REG_SFBR (reg, op, data) SFBR = reg op data +** << 0 >> +** +** REG_REG (reg, op, data) reg = reg op data +** << 0 >> +** +**----------------------------------------------------------- +** On 810A, 860, 825A, 875, 895 and 896 chips the content +** of SFBR register can be used as data (SCR_SFBR_DATA). +** The 896 has additionnal IO registers starting at +** offset 0x80. Bit 7 of register offset is stored in +** bit 7 of the SCRIPTS instruction first DWORD. +**----------------------------------------------------------- +*/ + +#define SCR_REG_OFS(ofs) ((((ofs) & 0x7f) << 16ul)) /* + ((ofs) & 0x80)) */ + +#define SCR_SFBR_REG(reg,op,data) \ + (0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul)) + +#define SCR_REG_SFBR(reg,op,data) \ + (0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul)) + +#define SCR_REG_REG(reg,op,data) \ + (0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul)) + + +#define SCR_LOAD 0x00000000 +#define SCR_SHL 0x01000000 +#define SCR_OR 0x02000000 +#define SCR_XOR 0x03000000 +#define SCR_AND 0x04000000 +#define SCR_SHR 0x05000000 +#define SCR_ADD 0x06000000 +#define SCR_ADDC 0x07000000 + +#define SCR_SFBR_DATA (0x00800000>>8ul) /* Use SFBR as data */ + +/*----------------------------------------------------------- +** +** FROM_REG (reg) SFBR = reg +** << 0 >> +** +** TO_REG (reg) reg = SFBR +** << 0 >> +** +** LOAD_REG (reg, data) reg = +** << 0 >> +** +** LOAD_SFBR(data) SFBR = +** << 0 >> +** +**----------------------------------------------------------- +*/ + +#define SCR_FROM_REG(reg) \ + SCR_REG_SFBR(reg,SCR_OR,0) + +#define SCR_TO_REG(reg) \ + SCR_SFBR_REG(reg,SCR_OR,0) + +#define SCR_LOAD_REG(reg,data) \ + SCR_REG_REG(reg,SCR_LOAD,data) + +#define SCR_LOAD_SFBR(data) \ + (SCR_REG_SFBR (gpreg, SCR_LOAD, data)) + +/*----------------------------------------------------------- +** +** LOAD from memory to register. +** STORE from register to memory. +** +** Only supported by 810A, 860, 825A, 875, 895 and 896. +** +**----------------------------------------------------------- +** +** LOAD_ABS (LEN) +** <> +** +** LOAD_REL (LEN) (DSA relative) +** <> +** +**----------------------------------------------------------- +*/ + +#define SCR_REG_OFS2(ofs) (((ofs) & 0xff) << 16ul) +#define SCR_NO_FLUSH2 0x02000000 +#define SCR_DSA_REL2 0x10000000 + +#define SCR_LOAD_R(reg, how, n) \ + (0xe1000000 | how | (SCR_REG_OFS2(REG(reg))) | (n)) + +#define SCR_STORE_R(reg, how, n) \ + (0xe0000000 | how | (SCR_REG_OFS2(REG(reg))) | (n)) + +#define SCR_LOAD_ABS(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2, n) +#define SCR_LOAD_REL(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2, n) +#define SCR_LOAD_ABS_F(reg, n) SCR_LOAD_R(reg, 0, n) +#define SCR_LOAD_REL_F(reg, n) SCR_LOAD_R(reg, SCR_DSA_REL2, n) + +#define SCR_STORE_ABS(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2, n) +#define SCR_STORE_REL(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2,n) +#define SCR_STORE_ABS_F(reg, n) SCR_STORE_R(reg, 0, n) +#define SCR_STORE_REL_F(reg, n) SCR_STORE_R(reg, SCR_DSA_REL2, n) + + +/*----------------------------------------------------------- +** +** Waiting for Disconnect or Reselect +** +**----------------------------------------------------------- +** +** JUMP [ | IFTRUE/IFFALSE ( ... ) ] +** <
> +** +** JUMPR [ | IFTRUE/IFFALSE ( ... ) ] +** <> +** +** CALL [ | IFTRUE/IFFALSE ( ... ) ] +** <
> +** +** CALLR [ | IFTRUE/IFFALSE ( ... ) ] +** <> +** +** RETURN [ | IFTRUE/IFFALSE ( ... ) ] +** <> +** +** INT [ | IFTRUE/IFFALSE ( ... ) ] +** <> +** +** INT_FLY [ | IFTRUE/IFFALSE ( ... ) ] +** <> +** +** Conditions: +** WHEN (phase) +** IF (phase) +** CARRYSET +** DATA (data, mask) +** +**----------------------------------------------------------- +*/ + +#define SCR_NO_OP 0x80000000 +#define SCR_JUMP 0x80080000 +#define SCR_JUMP64 0x80480000 +#define SCR_JUMPR 0x80880000 +#define SCR_CALL 0x88080000 +#define SCR_CALLR 0x88880000 +#define SCR_RETURN 0x90080000 +#define SCR_INT 0x98080000 +#define SCR_INT_FLY 0x98180000 + +#define IFFALSE(arg) (0x00080000 | (arg)) +#define IFTRUE(arg) (0x00000000 | (arg)) + +#define WHEN(phase) (0x00030000 | (phase)) +#define IF(phase) (0x00020000 | (phase)) + +#define DATA(D) (0x00040000 | ((D) & 0xff)) +#define MASK(D,M) (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff)) + +#define CARRYSET (0x00200000) + + + +#define SIR_COMPLETE 0x10000000 +/* script errors */ +#define SIR_SEL_ATN_NO_MSG_OUT 0x00000001 +#define SIR_CMD_OUT_ILL_PH 0x00000002 +#define SIR_STATUS_ILL_PH 0x00000003 +#define SIR_MSG_RECEIVED 0x00000004 +#define SIR_DATA_IN_ERR 0x00000005 +#define SIR_DATA_OUT_ERR 0x00000006 +#define SIR_SCRIPT_ERROR 0x00000007 +#define SIR_MSG_OUT_NO_CMD 0x00000008 +#define SIR_MSG_OVER7 0x00000009 +/* Fly interrupt */ +#define INT_ON_FY 0x00000080 + +/* Hardware errors are defined in scsi.h */ + +#define SCSI_IDENTIFY 0xC0 + +#ifndef TRUE +#define TRUE 1 +#endif +#ifndef FALSE +#define FALSE 0 +#endif + +#endif