From: David Wu Date: Wed, 2 Jan 2019 13:00:55 +0000 (+0800) Subject: pinctrl: rockchip: Add common rockchip pinctrl driver X-Git-Tag: v2019.04-rc1~8^2~27 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=e7ae4cf27a6d5837cb5e868712cdaa61d3ceb5e0;p=oweals%2Fu-boot.git pinctrl: rockchip: Add common rockchip pinctrl driver Use this driver to fit all Rockchip SOCs and to support the desired pinctrl configuration via DTS. Signed-off-by: David Wu Acked-by: Heiko Stuebner Reviewed-by: Kever Yang Reviewed-by: Philipp Tomsich --- diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index fb441b3bf1..fdc12e0607 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -158,96 +158,6 @@ config PINCTRL_QCA953X the GPIO definitions and pin control functions for each available multiplex function. -config PINCTRL_ROCKCHIP_RK3036 - bool "Rockchip rk3036 pin control driver" - depends on DM - help - Support pin multiplexing control on Rockchip rk3036 SoCs. - - The driver is controlled by a device tree node which contains both - the GPIO definitions and pin control functions for each available - multiplex function. - -config PINCTRL_ROCKCHIP_RK3128 - bool "Rockchip rk3128 pin control driver" - depends on DM - help - Support pin multiplexing control on Rockchip rk3128 SoCs. - - The driver is controlled by a device tree node which contains both - the GPIO definitions and pin control functions for each available - multiplex function. - -config PINCTRL_ROCKCHIP_RK3188 - bool "Rockchip rk3188 pin control driver" - depends on DM - help - Support pin multiplexing control on Rockchip rk3188 SoCs. - - The driver is controlled by a device tree node which contains both - the GPIO definitions and pin control functions for each available - multiplex function. - -config PINCTRL_ROCKCHIP_RK322X - bool "Rockchip rk322x pin control driver" - depends on DM - help - Support pin multiplexing control on Rockchip rk322x SoCs. - - The driver is controlled by a device tree node which contains both - the GPIO definitions and pin control functions for each available - multiplex function. - -config PINCTRL_ROCKCHIP_RK3288 - bool "Rockchip rk3288 pin control driver" - depends on DM - help - Support pin multiplexing control on Rockchip rk3288 SoCs. - - The driver is controlled by a device tree node which contains both - the GPIO definitions and pin control functions for each available - multiplex function. - -config PINCTRL_ROCKCHIP_RK3328 - bool "Rockchip rk3328 pin control driver" - depends on DM - help - Support pin multiplexing control on Rockchip rk3328 SoCs. - - The driver is controlled by a device tree node which contains both - the GPIO definitions and pin control functions for each available - multiplex function. - -config PINCTRL_ROCKCHIP_RK3368 - bool "Rockchip RK3368 pin control driver" - depends on DM - help - Support pin multiplexing control on Rockchip rk3368 SoCs. - - The driver is controlled by a device tree node which contains both - the GPIO definitions and pin control functions for each available - multiplex function. - -config PINCTRL_ROCKCHIP_RK3399 - bool "Rockchip rk3399 pin control driver" - depends on DM - help - Support pin multiplexing control on Rockchip rk3399 SoCs. - - The driver is controlled by a device tree node which contains both - the GPIO definitions and pin control functions for each available - multiplex function. - -config PINCTRL_ROCKCHIP_RK3399_FULL - bool "Rockchip rk3399 pin control driver (full)" - depends on PINCTRL_FULL && PINCTRL_ROCKCHIP_RK3399 - help - Support full pin multiplexing control on Rockchip rk3399 SoCs. - - This enables the full pinctrl driver for the RK3399. - Contrary to the non-full pinctrl driver, this will evaluate - the board DTB to get the pinctrl settings. - config PINCTRL_ROCKCHIP_RV1108 bool "Rockchip rv1108 pin control driver" depends on DM diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 66d36b99d1..e2c2b159d8 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -6,10 +6,10 @@ obj-$(CONFIG_$(SPL_)PINCTRL_GENERIC) += pinctrl-generic.o obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o obj-$(CONFIG_PINCTRL_AT91PIO4) += pinctrl-at91-pio4.o obj-y += nxp/ +obj-$(CONFIG_$(SPL_)PINCTRL_ROCKCHIP) += rockchip/ obj-$(CONFIG_ARCH_ASPEED) += aspeed/ obj-$(CONFIG_ARCH_ATH79) += ath79/ obj-$(CONFIG_ARCH_RMOBILE) += renesas/ -obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/ obj-$(CONFIG_PINCTRL_SANDBOX) += pinctrl-sandbox.o obj-$(CONFIG_PINCTRL_UNIPHIER) += uniphier/ diff --git a/drivers/pinctrl/rockchip/Kconfig b/drivers/pinctrl/rockchip/Kconfig new file mode 100644 index 0000000000..dc4ba34ae5 --- /dev/null +++ b/drivers/pinctrl/rockchip/Kconfig @@ -0,0 +1,17 @@ +if ARCH_ROCKCHIP + +config PINCTRL_ROCKCHIP + bool "Rockchip pin control drivers" + depends on ARCH_ROCKCHIP && PINCTRL_GENERIC + default y + help + Enable support pin control functions for Rockchip SoCs. + +config SPL_PINCTRL_ROCKCHIP + bool "Support Rockchip pin controllers in SPL" + depends on ARCH_ROCKCHIP && SPL_PINCTRL_GENERIC + default y + help + This option is an SPL-variant of the PINCTRL_ROCKCHIP option. + +endif diff --git a/drivers/pinctrl/rockchip/Makefile b/drivers/pinctrl/rockchip/Makefile index 5e3fbcb4bc..a616d8587f 100644 --- a/drivers/pinctrl/rockchip/Makefile +++ b/drivers/pinctrl/rockchip/Makefile @@ -2,12 +2,13 @@ # # Copyright (c) 2017 Rockchip Electronics Co., Ltd -obj-$(CONFIG_PINCTRL_ROCKCHIP_RK3036) += pinctrl_rk3036.o -obj-$(CONFIG_PINCTRL_ROCKCHIP_RK3128) += pinctrl_rk3128.o -obj-$(CONFIG_PINCTRL_ROCKCHIP_RK3188) += pinctrl_rk3188.o -obj-$(CONFIG_PINCTRL_ROCKCHIP_RK322X) += pinctrl_rk322x.o -obj-$(CONFIG_PINCTRL_ROCKCHIP_RK3288) += pinctrl_rk3288.o -obj-$(CONFIG_PINCTRL_ROCKCHIP_RK3328) += pinctrl_rk3328.o -obj-$(CONFIG_PINCTRL_ROCKCHIP_RK3368) += pinctrl_rk3368.o -obj-$(CONFIG_PINCTRL_ROCKCHIP_RK3399) += pinctrl_rk3399.o -obj-$(CONFIG_PINCTRL_ROCKCHIP_RV1108) += pinctrl_rv1108.o +obj-y += pinctrl-rockchip-core.o +obj-$(CONFIG_ROCKCHIP_RK3036) += pinctrl-rk3036.o +obj-$(CONFIG_ROCKCHIP_RK3128) += pinctrl-rk3128.o +obj-$(CONFIG_ROCKCHIP_RK3188) += pinctrl-rk3188.o +obj-$(CONFIG_ROCKCHIP_RK322X) += pinctrl-rk322x.o +obj-$(CONFIG_ROCKCHIP_RK3288) += pinctrl-rk3288.o +obj-$(CONFIG_ROCKCHIP_RK3328) += pinctrl-rk3328.o +obj-$(CONFIG_ROCKCHIP_RK3368) += pinctrl-rk3368.o +obj-$(CONFIG_ROCKCHIP_RK3399) += pinctrl-rk3399.o +obj-$(CONFIG_ROCKCHIP_RV1108) += pinctrl-rv1108.o diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3036.c b/drivers/pinctrl/rockchip/pinctrl-rk3036.c new file mode 100644 index 0000000000..2729b03443 --- /dev/null +++ b/drivers/pinctrl/rockchip/pinctrl-rk3036.c @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2019 Rockchip Electronics Co., Ltd + */ + +#include +#include +#include +#include +#include + +#include "pinctrl-rockchip.h" + +#define RK3036_PULL_OFFSET 0x118 +#define RK3036_PULL_PINS_PER_REG 16 +#define RK3036_PULL_BANK_STRIDE 8 + +static void rk3036_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl_priv *priv = bank->priv; + + *regmap = priv->regmap_base; + *reg = RK3036_PULL_OFFSET; + *reg += bank->bank_num * RK3036_PULL_BANK_STRIDE; + *reg += (pin_num / RK3036_PULL_PINS_PER_REG) * 4; + + *bit = pin_num % RK3036_PULL_PINS_PER_REG; +}; + +static struct rockchip_pin_bank rk3036_pin_banks[] = { + PIN_BANK(0, 32, "gpio0"), + PIN_BANK(1, 32, "gpio1"), + PIN_BANK(2, 32, "gpio2"), +}; + +static struct rockchip_pin_ctrl rk3036_pin_ctrl = { + .pin_banks = rk3036_pin_banks, + .nr_banks = ARRAY_SIZE(rk3036_pin_banks), + .label = "RK3036-GPIO", + .type = RK3036, + .grf_mux_offset = 0xa8, + .pull_calc_reg = rk3036_calc_pull_reg_and_bit, +}; + +static const struct udevice_id rk3036_pinctrl_ids[] = { + { + .compatible = "rockchip,rk3036-pinctrl", + .data = (ulong)&rk3036_pin_ctrl + }, + {} +}; + +U_BOOT_DRIVER(pinctrl_rockchip) = { + .name = "rk3036-pinctrl", + .id = UCLASS_PINCTRL, + .of_match = rk3036_pinctrl_ids, + .priv_auto_alloc_size = sizeof(struct rockchip_pinctrl_priv), + .ops = &rockchip_pinctrl_ops, +#if !CONFIG_IS_ENABLED(OF_PLATDATA) + .bind = dm_scan_fdt_dev, +#endif + .probe = rockchip_pinctrl_probe, +}; diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3128.c b/drivers/pinctrl/rockchip/pinctrl-rk3128.c new file mode 100644 index 0000000000..43a6c173a0 --- /dev/null +++ b/drivers/pinctrl/rockchip/pinctrl-rk3128.c @@ -0,0 +1,155 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2019 Rockchip Electronics Co., Ltd + */ + +#include +#include +#include +#include +#include + +#include "pinctrl-rockchip.h" + +static struct rockchip_mux_recalced_data rk3128_mux_recalced_data[] = { + { + .num = 2, + .pin = 20, + .reg = 0xe8, + .bit = 0, + .mask = 0x7 + }, { + .num = 2, + .pin = 21, + .reg = 0xe8, + .bit = 4, + .mask = 0x7 + }, { + .num = 2, + .pin = 22, + .reg = 0xe8, + .bit = 8, + .mask = 0x7 + }, { + .num = 2, + .pin = 23, + .reg = 0xe8, + .bit = 12, + .mask = 0x7 + }, { + .num = 2, + .pin = 24, + .reg = 0xd4, + .bit = 12, + .mask = 0x7 + }, +}; + +static struct rockchip_mux_route_data rk3128_mux_route_data[] = { + { + /* spi-0 */ + .bank_num = 1, + .pin = 10, + .func = 1, + .route_offset = 0x144, + .route_val = BIT(16 + 3) | BIT(16 + 4), + }, { + /* spi-1 */ + .bank_num = 1, + .pin = 27, + .func = 3, + .route_offset = 0x144, + .route_val = BIT(16 + 3) | BIT(16 + 4) | BIT(3), + }, { + /* spi-2 */ + .bank_num = 0, + .pin = 13, + .func = 2, + .route_offset = 0x144, + .route_val = BIT(16 + 3) | BIT(16 + 4) | BIT(4), + }, { + /* i2s-0 */ + .bank_num = 1, + .pin = 5, + .func = 1, + .route_offset = 0x144, + .route_val = BIT(16 + 5), + }, { + /* i2s-1 */ + .bank_num = 0, + .pin = 14, + .func = 1, + .route_offset = 0x144, + .route_val = BIT(16 + 5) | BIT(5), + }, { + /* emmc-0 */ + .bank_num = 1, + .pin = 22, + .func = 2, + .route_offset = 0x144, + .route_val = BIT(16 + 6), + }, { + /* emmc-1 */ + .bank_num = 2, + .pin = 4, + .func = 2, + .route_offset = 0x144, + .route_val = BIT(16 + 6) | BIT(6), + }, +}; + +#define RK3128_PULL_OFFSET 0x118 +#define RK3128_PULL_PINS_PER_REG 16 +#define RK3128_PULL_BANK_STRIDE 8 + +static void rk3128_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl_priv *priv = bank->priv; + + *regmap = priv->regmap_base; + *reg = RK3128_PULL_OFFSET; + *reg += bank->bank_num * RK3128_PULL_BANK_STRIDE; + *reg += ((pin_num / RK3128_PULL_PINS_PER_REG) * 4); + + *bit = pin_num % RK3128_PULL_PINS_PER_REG; +} + +static struct rockchip_pin_bank rk3128_pin_banks[] = { + PIN_BANK(0, 32, "gpio0"), + PIN_BANK(1, 32, "gpio1"), + PIN_BANK(2, 32, "gpio2"), + PIN_BANK(3, 32, "gpio3"), +}; + +static struct rockchip_pin_ctrl rk3128_pin_ctrl = { + .pin_banks = rk3128_pin_banks, + .nr_banks = ARRAY_SIZE(rk3128_pin_banks), + .label = "RK3128-GPIO", + .type = RK3128, + .grf_mux_offset = 0xa8, + .iomux_recalced = rk3128_mux_recalced_data, + .niomux_recalced = ARRAY_SIZE(rk3128_mux_recalced_data), + .iomux_routes = rk3128_mux_route_data, + .niomux_routes = ARRAY_SIZE(rk3128_mux_route_data), + .pull_calc_reg = rk3128_calc_pull_reg_and_bit, +}; + +static const struct udevice_id rk3128_pinctrl_ids[] = { + { .compatible = "rockchip,rk3128-pinctrl", + .data = (ulong)&rk3128_pin_ctrl }, + { } +}; + +U_BOOT_DRIVER(pinctrl_rk3128) = { + .name = "pinctrl_rk3128", + .id = UCLASS_PINCTRL, + .of_match = rk3128_pinctrl_ids, + .priv_auto_alloc_size = sizeof(struct rockchip_pinctrl_priv), + .ops = &rockchip_pinctrl_ops, +#if !CONFIG_IS_ENABLED(OF_PLATDATA) + .bind = dm_scan_fdt_dev, +#endif + .probe = rockchip_pinctrl_probe, +}; diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3188.c b/drivers/pinctrl/rockchip/pinctrl-rk3188.c new file mode 100644 index 0000000000..5ed9aec938 --- /dev/null +++ b/drivers/pinctrl/rockchip/pinctrl-rk3188.c @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2019 Rockchip Electronics Co., Ltd + */ + +#include +#include +#include +#include +#include + +#include "pinctrl-rockchip.h" + +#define RK3188_PULL_OFFSET 0x164 +#define RK3188_PULL_PMU_OFFSET 0x64 + +static void rk3188_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl_priv *priv = bank->priv; + + /* The first 12 pins of the first bank are located elsewhere */ + if (bank->bank_num == 0 && pin_num < 12) { + *regmap = priv->regmap_pmu; + *reg = RK3188_PULL_PMU_OFFSET; + + *reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4); + *bit = pin_num % ROCKCHIP_PULL_PINS_PER_REG; + *bit *= ROCKCHIP_PULL_BITS_PER_PIN; + } else { + *regmap = priv->regmap_base; + *reg = RK3188_PULL_OFFSET; + + /* correct the offset, as it is the 2nd pull register */ + *reg -= 4; + *reg += bank->bank_num * ROCKCHIP_PULL_BANK_STRIDE; + *reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4); + + /* + * The bits in these registers have an inverse ordering + * with the lowest pin being in bits 15:14 and the highest + * pin in bits 1:0 + */ + *bit = 7 - (pin_num % ROCKCHIP_PULL_PINS_PER_REG); + *bit *= ROCKCHIP_PULL_BITS_PER_PIN; + } +} + +static struct rockchip_pin_bank rk3188_pin_banks[] = { + PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_GPIO_ONLY, 0, 0, 0), + PIN_BANK(1, 32, "gpio1"), + PIN_BANK(2, 32, "gpio2"), + PIN_BANK(3, 32, "gpio3"), +}; + +static struct rockchip_pin_ctrl rk3188_pin_ctrl = { + .pin_banks = rk3188_pin_banks, + .nr_banks = ARRAY_SIZE(rk3188_pin_banks), + .label = "RK3188-GPIO", + .type = RK3188, + .grf_mux_offset = 0x60, + .pull_calc_reg = rk3188_calc_pull_reg_and_bit, +}; + +static const struct udevice_id rk3188_pinctrl_ids[] = { + { .compatible = "rockchip,rk3188-pinctrl", + .data = (ulong)&rk3188_pin_ctrl }, + { } +}; + +U_BOOT_DRIVER(pinctrl_rk3188) = { + .name = "rockchip_rk3188_pinctrl", + .id = UCLASS_PINCTRL, + .of_match = rk3188_pinctrl_ids, + .priv_auto_alloc_size = sizeof(struct rockchip_pinctrl_priv), + .ops = &rockchip_pinctrl_ops, +#if !CONFIG_IS_ENABLED(OF_PLATDATA) + .bind = dm_scan_fdt_dev, +#endif + .probe = rockchip_pinctrl_probe, +}; diff --git a/drivers/pinctrl/rockchip/pinctrl-rk322x.c b/drivers/pinctrl/rockchip/pinctrl-rk322x.c new file mode 100644 index 0000000000..d2a6cd7055 --- /dev/null +++ b/drivers/pinctrl/rockchip/pinctrl-rk322x.c @@ -0,0 +1,215 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2019 Rockchip Electronics Co., Ltd + */ + +#include +#include +#include +#include +#include + +#include "pinctrl-rockchip.h" + +static struct rockchip_mux_route_data rk3228_mux_route_data[] = { + { + /* pwm0-0 */ + .bank_num = 0, + .pin = 26, + .func = 1, + .route_offset = 0x50, + .route_val = BIT(16), + }, { + /* pwm0-1 */ + .bank_num = 3, + .pin = 21, + .func = 1, + .route_offset = 0x50, + .route_val = BIT(16) | BIT(0), + }, { + /* pwm1-0 */ + .bank_num = 0, + .pin = 27, + .func = 1, + .route_offset = 0x50, + .route_val = BIT(16 + 1), + }, { + /* pwm1-1 */ + .bank_num = 0, + .pin = 30, + .func = 2, + .route_offset = 0x50, + .route_val = BIT(16 + 1) | BIT(1), + }, { + /* pwm2-0 */ + .bank_num = 0, + .pin = 28, + .func = 1, + .route_offset = 0x50, + .route_val = BIT(16 + 2), + }, { + /* pwm2-1 */ + .bank_num = 1, + .pin = 12, + .func = 2, + .route_offset = 0x50, + .route_val = BIT(16 + 2) | BIT(2), + }, { + /* pwm3-0 */ + .bank_num = 3, + .pin = 26, + .func = 1, + .route_offset = 0x50, + .route_val = BIT(16 + 3), + }, { + /* pwm3-1 */ + .bank_num = 1, + .pin = 11, + .func = 2, + .route_offset = 0x50, + .route_val = BIT(16 + 3) | BIT(3), + }, { + /* sdio-0_d0 */ + .bank_num = 1, + .pin = 1, + .func = 1, + .route_offset = 0x50, + .route_val = BIT(16 + 4), + }, { + /* sdio-1_d0 */ + .bank_num = 3, + .pin = 2, + .func = 1, + .route_offset = 0x50, + .route_val = BIT(16 + 4) | BIT(4), + }, { + /* spi-0_rx */ + .bank_num = 0, + .pin = 13, + .func = 2, + .route_offset = 0x50, + .route_val = BIT(16 + 5), + }, { + /* spi-1_rx */ + .bank_num = 2, + .pin = 0, + .func = 2, + .route_offset = 0x50, + .route_val = BIT(16 + 5) | BIT(5), + }, { + /* emmc-0_cmd */ + .bank_num = 1, + .pin = 22, + .func = 2, + .route_offset = 0x50, + .route_val = BIT(16 + 7), + }, { + /* emmc-1_cmd */ + .bank_num = 2, + .pin = 4, + .func = 2, + .route_offset = 0x50, + .route_val = BIT(16 + 7) | BIT(7), + }, { + /* uart2-0_rx */ + .bank_num = 1, + .pin = 19, + .func = 2, + .route_offset = 0x50, + .route_val = BIT(16 + 8), + }, { + /* uart2-1_rx */ + .bank_num = 1, + .pin = 10, + .func = 2, + .route_offset = 0x50, + .route_val = BIT(16 + 8) | BIT(8), + }, { + /* uart1-0_rx */ + .bank_num = 1, + .pin = 10, + .func = 1, + .route_offset = 0x50, + .route_val = BIT(16 + 11), + }, { + /* uart1-1_rx */ + .bank_num = 3, + .pin = 13, + .func = 1, + .route_offset = 0x50, + .route_val = BIT(16 + 11) | BIT(11), + }, +}; + +#define RK3228_PULL_OFFSET 0x100 + +static void rk3228_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl_priv *priv = bank->priv; + + *regmap = priv->regmap_base; + *reg = RK3228_PULL_OFFSET; + *reg += bank->bank_num * ROCKCHIP_PULL_BANK_STRIDE; + *reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4); + + *bit = (pin_num % ROCKCHIP_PULL_PINS_PER_REG); + *bit *= ROCKCHIP_PULL_BITS_PER_PIN; +} + +#define RK3228_DRV_GRF_OFFSET 0x200 + +static void rk3228_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl_priv *priv = bank->priv; + + *regmap = priv->regmap_base; + *reg = RK3228_DRV_GRF_OFFSET; + *reg += bank->bank_num * ROCKCHIP_DRV_BANK_STRIDE; + *reg += ((pin_num / ROCKCHIP_DRV_PINS_PER_REG) * 4); + + *bit = (pin_num % ROCKCHIP_DRV_PINS_PER_REG); + *bit *= ROCKCHIP_DRV_BITS_PER_PIN; +} + +static struct rockchip_pin_bank rk3228_pin_banks[] = { + PIN_BANK(0, 32, "gpio0"), + PIN_BANK(1, 32, "gpio1"), + PIN_BANK(2, 32, "gpio2"), + PIN_BANK(3, 32, "gpio3"), +}; + +static struct rockchip_pin_ctrl rk3228_pin_ctrl = { + .pin_banks = rk3228_pin_banks, + .nr_banks = ARRAY_SIZE(rk3228_pin_banks), + .label = "RK3228-GPIO", + .type = RK3288, + .grf_mux_offset = 0x0, + .iomux_routes = rk3228_mux_route_data, + .niomux_routes = ARRAY_SIZE(rk3228_mux_route_data), + .pull_calc_reg = rk3228_calc_pull_reg_and_bit, + .drv_calc_reg = rk3228_calc_drv_reg_and_bit, +}; + +static const struct udevice_id rk3228_pinctrl_ids[] = { + { + .compatible = "rockchip,rk3228-pinctrl", + .data = (ulong)&rk3228_pin_ctrl + }, + { } +}; + +U_BOOT_DRIVER(pinctrl_rk3228) = { + .name = "rockchip_rk3228_pinctrl", + .id = UCLASS_PINCTRL, + .of_match = rk3228_pinctrl_ids, + .priv_auto_alloc_size = sizeof(struct rockchip_pinctrl_priv), + .ops = &rockchip_pinctrl_ops, +#if !CONFIG_IS_ENABLED(OF_PLATDATA) + .bind = dm_scan_fdt_dev, +#endif + .probe = rockchip_pinctrl_probe, +}; diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3288.c b/drivers/pinctrl/rockchip/pinctrl-rk3288.c new file mode 100644 index 0000000000..60585f3208 --- /dev/null +++ b/drivers/pinctrl/rockchip/pinctrl-rk3288.c @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2019 Rockchip Electronics Co., Ltd + */ + +#include +#include +#include +#include +#include + +#include "pinctrl-rockchip.h" + +static struct rockchip_mux_route_data rk3288_mux_route_data[] = { + { + /* edphdmi_cecinoutt1 */ + .bank_num = 7, + .pin = 16, + .func = 2, + .route_offset = 0x264, + .route_val = BIT(16 + 12) | BIT(12), + }, { + /* edphdmi_cecinout */ + .bank_num = 7, + .pin = 23, + .func = 4, + .route_offset = 0x264, + .route_val = BIT(16 + 12), + }, +}; + +#define RK3288_PULL_OFFSET 0x140 +#define RK3288_PULL_PMU_OFFSET 0x64 + +static void rk3288_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl_priv *priv = bank->priv; + + /* The first 24 pins of the first bank are located in PMU */ + if (bank->bank_num == 0) { + *regmap = priv->regmap_pmu; + *reg = RK3288_PULL_PMU_OFFSET; + + *reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4); + *bit = pin_num % ROCKCHIP_PULL_PINS_PER_REG; + *bit *= ROCKCHIP_PULL_BITS_PER_PIN; + } else { + *regmap = priv->regmap_base; + *reg = RK3288_PULL_OFFSET; + + /* correct the offset, as we're starting with the 2nd bank */ + *reg -= 0x10; + *reg += bank->bank_num * ROCKCHIP_PULL_BANK_STRIDE; + *reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4); + + *bit = (pin_num % ROCKCHIP_PULL_PINS_PER_REG); + *bit *= ROCKCHIP_PULL_BITS_PER_PIN; + } +} + +#define RK3288_DRV_PMU_OFFSET 0x70 +#define RK3288_DRV_GRF_OFFSET 0x1c0 + +static void rk3288_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl_priv *priv = bank->priv; + + /* The first 24 pins of the first bank are located in PMU */ + if (bank->bank_num == 0) { + *regmap = priv->regmap_pmu; + *reg = RK3288_DRV_PMU_OFFSET; + + *reg += ((pin_num / ROCKCHIP_DRV_PINS_PER_REG) * 4); + *bit = pin_num % ROCKCHIP_DRV_PINS_PER_REG; + *bit *= ROCKCHIP_DRV_BITS_PER_PIN; + } else { + *regmap = priv->regmap_base; + *reg = RK3288_DRV_GRF_OFFSET; + + /* correct the offset, as we're starting with the 2nd bank */ + *reg -= 0x10; + *reg += bank->bank_num * ROCKCHIP_DRV_BANK_STRIDE; + *reg += ((pin_num / ROCKCHIP_DRV_PINS_PER_REG) * 4); + + *bit = (pin_num % ROCKCHIP_DRV_PINS_PER_REG); + *bit *= ROCKCHIP_DRV_BITS_PER_PIN; + } +} + +static struct rockchip_pin_bank rk3288_pin_banks[] = { + PIN_BANK_IOMUX_FLAGS(0, 24, "gpio0", IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + IOMUX_UNROUTED + ), + PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", IOMUX_UNROUTED, + IOMUX_UNROUTED, + IOMUX_UNROUTED, + 0 + ), + PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, 0, 0, IOMUX_UNROUTED), + PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", 0, 0, 0, IOMUX_WIDTH_4BIT), + PIN_BANK_IOMUX_FLAGS(4, 32, "gpio4", IOMUX_WIDTH_4BIT, + IOMUX_WIDTH_4BIT, + 0, + 0 + ), + PIN_BANK_IOMUX_FLAGS(5, 32, "gpio5", IOMUX_UNROUTED, + 0, + 0, + IOMUX_UNROUTED + ), + PIN_BANK_IOMUX_FLAGS(6, 32, "gpio6", 0, 0, 0, IOMUX_UNROUTED), + PIN_BANK_IOMUX_FLAGS(7, 32, "gpio7", 0, + 0, + IOMUX_WIDTH_4BIT, + IOMUX_UNROUTED + ), + PIN_BANK(8, 16, "gpio8"), +}; + +static struct rockchip_pin_ctrl rk3288_pin_ctrl = { + .pin_banks = rk3288_pin_banks, + .nr_banks = ARRAY_SIZE(rk3288_pin_banks), + .label = "RK3288-GPIO", + .type = RK3288, + .grf_mux_offset = 0x0, + .pmu_mux_offset = 0x84, + .iomux_routes = rk3288_mux_route_data, + .niomux_routes = ARRAY_SIZE(rk3288_mux_route_data), + .pull_calc_reg = rk3288_calc_pull_reg_and_bit, + .drv_calc_reg = rk3288_calc_drv_reg_and_bit, +}; + +static const struct udevice_id rk3288_pinctrl_ids[] = { + { + .compatible = "rockchip,rk3288-pinctrl", + .data = (ulong)&rk3288_pin_ctrl + }, + { } +}; + +U_BOOT_DRIVER(pinctrl_rk3288) = { + .name = "rockchip_rk3288_pinctrl", + .id = UCLASS_PINCTRL, + .of_match = rk3288_pinctrl_ids, + .priv_auto_alloc_size = sizeof(struct rockchip_pinctrl_priv), + .ops = &rockchip_pinctrl_ops, +#if !CONFIG_IS_ENABLED(OF_PLATDATA) + .bind = dm_scan_fdt_dev, +#endif + .probe = rockchip_pinctrl_probe, +}; diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3328.c b/drivers/pinctrl/rockchip/pinctrl-rk3328.c new file mode 100644 index 0000000000..f1b3d10dbe --- /dev/null +++ b/drivers/pinctrl/rockchip/pinctrl-rk3328.c @@ -0,0 +1,227 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2019 Rockchip Electronics Co., Ltd + */ + +#include +#include +#include +#include +#include + +#include "pinctrl-rockchip.h" + +static struct rockchip_mux_recalced_data rk3328_mux_recalced_data[] = { + { + .num = 2, + .pin = 12, + .reg = 0x24, + .bit = 8, + .mask = 0x3 + }, { + .num = 2, + .pin = 15, + .reg = 0x28, + .bit = 0, + .mask = 0x7 + }, { + .num = 2, + .pin = 23, + .reg = 0x30, + .bit = 14, + .mask = 0x3 + }, +}; + +static struct rockchip_mux_route_data rk3328_mux_route_data[] = { + { + /* uart2dbg_rxm0 */ + .bank_num = 1, + .pin = 1, + .func = 2, + .route_offset = 0x50, + .route_val = BIT(16) | BIT(16 + 1), + }, { + /* uart2dbg_rxm1 */ + .bank_num = 2, + .pin = 1, + .func = 1, + .route_offset = 0x50, + .route_val = BIT(16) | BIT(16 + 1) | BIT(0), + }, { + /* gmac-m1_rxd0 */ + .bank_num = 1, + .pin = 11, + .func = 2, + .route_offset = 0x50, + .route_val = BIT(16 + 2) | BIT(2), + }, { + /* gmac-m1-optimized_rxd3 */ + .bank_num = 1, + .pin = 14, + .func = 2, + .route_offset = 0x50, + .route_val = BIT(16 + 10) | BIT(10), + }, { + /* pdm_sdi0m0 */ + .bank_num = 2, + .pin = 19, + .func = 2, + .route_offset = 0x50, + .route_val = BIT(16 + 3), + }, { + /* pdm_sdi0m1 */ + .bank_num = 1, + .pin = 23, + .func = 3, + .route_offset = 0x50, + .route_val = BIT(16 + 3) | BIT(3), + }, { + /* spi_rxdm2 */ + .bank_num = 3, + .pin = 2, + .func = 4, + .route_offset = 0x50, + .route_val = BIT(16 + 4) | BIT(16 + 5) | BIT(5), + }, { + /* i2s2_sdim0 */ + .bank_num = 1, + .pin = 24, + .func = 1, + .route_offset = 0x50, + .route_val = BIT(16 + 6), + }, { + /* i2s2_sdim1 */ + .bank_num = 3, + .pin = 2, + .func = 6, + .route_offset = 0x50, + .route_val = BIT(16 + 6) | BIT(6), + }, { + /* card_iom1 */ + .bank_num = 2, + .pin = 22, + .func = 3, + .route_offset = 0x50, + .route_val = BIT(16 + 7) | BIT(7), + }, { + /* tsp_d5m1 */ + .bank_num = 2, + .pin = 16, + .func = 3, + .route_offset = 0x50, + .route_val = BIT(16 + 8) | BIT(8), + }, { + /* cif_data5m1 */ + .bank_num = 2, + .pin = 16, + .func = 4, + .route_offset = 0x50, + .route_val = BIT(16 + 9) | BIT(9), + }, +}; + +#define RK3328_PULL_OFFSET 0x100 + +static void rk3328_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl_priv *priv = bank->priv; + + *regmap = priv->regmap_base; + *reg = RK3328_PULL_OFFSET; + *reg += bank->bank_num * ROCKCHIP_PULL_BANK_STRIDE; + *reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4); + + *bit = (pin_num % ROCKCHIP_PULL_PINS_PER_REG); + *bit *= ROCKCHIP_PULL_BITS_PER_PIN; +} + +#define RK3328_DRV_GRF_OFFSET 0x200 + +static void rk3328_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl_priv *priv = bank->priv; + + *regmap = priv->regmap_base; + *reg = RK3328_DRV_GRF_OFFSET; + *reg += bank->bank_num * ROCKCHIP_DRV_BANK_STRIDE; + *reg += ((pin_num / ROCKCHIP_DRV_PINS_PER_REG) * 4); + + *bit = (pin_num % ROCKCHIP_DRV_PINS_PER_REG); + *bit *= ROCKCHIP_DRV_BITS_PER_PIN; +} + +#define RK3328_SCHMITT_BITS_PER_PIN 1 +#define RK3328_SCHMITT_PINS_PER_REG 16 +#define RK3328_SCHMITT_BANK_STRIDE 8 +#define RK3328_SCHMITT_GRF_OFFSET 0x380 + +static int rk3328_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank, + int pin_num, + struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl_priv *priv = bank->priv; + + *regmap = priv->regmap_base; + *reg = RK3328_SCHMITT_GRF_OFFSET; + + *reg += bank->bank_num * RK3328_SCHMITT_BANK_STRIDE; + *reg += ((pin_num / RK3328_SCHMITT_PINS_PER_REG) * 4); + *bit = pin_num % RK3328_SCHMITT_PINS_PER_REG; + + return 0; +} + +static struct rockchip_pin_bank rk3328_pin_banks[] = { + PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", 0, 0, 0, 0), + PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", 0, 0, 0, 0), + PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, + IOMUX_WIDTH_3BIT, + IOMUX_WIDTH_3BIT, + 0), + PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", + IOMUX_WIDTH_3BIT, + IOMUX_WIDTH_3BIT, + 0, + 0), +}; + +static struct rockchip_pin_ctrl rk3328_pin_ctrl = { + .pin_banks = rk3328_pin_banks, + .nr_banks = ARRAY_SIZE(rk3328_pin_banks), + .label = "RK3328-GPIO", + .type = RK3288, + .grf_mux_offset = 0x0, + .iomux_recalced = rk3328_mux_recalced_data, + .niomux_recalced = ARRAY_SIZE(rk3328_mux_recalced_data), + .iomux_routes = rk3328_mux_route_data, + .niomux_routes = ARRAY_SIZE(rk3328_mux_route_data), + .pull_calc_reg = rk3328_calc_pull_reg_and_bit, + .drv_calc_reg = rk3328_calc_drv_reg_and_bit, + .schmitt_calc_reg = rk3328_calc_schmitt_reg_and_bit, +}; + +static const struct udevice_id rk3328_pinctrl_ids[] = { + { + .compatible = "rockchip,rk3328-pinctrl", + .data = (ulong)&rk3328_pin_ctrl + }, + { } +}; + +U_BOOT_DRIVER(pinctrl_rk3328) = { + .name = "rockchip_rk3328_pinctrl", + .id = UCLASS_PINCTRL, + .of_match = rk3328_pinctrl_ids, + .priv_auto_alloc_size = sizeof(struct rockchip_pinctrl_priv), + .ops = &rockchip_pinctrl_ops, +#if !CONFIG_IS_ENABLED(OF_PLATDATA) + .bind = dm_scan_fdt_dev, +#endif + .probe = rockchip_pinctrl_probe, +}; diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3368.c b/drivers/pinctrl/rockchip/pinctrl-rk3368.c new file mode 100644 index 0000000000..f5cd6ff24e --- /dev/null +++ b/drivers/pinctrl/rockchip/pinctrl-rk3368.c @@ -0,0 +1,116 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2019 Rockchip Electronics Co., Ltd + */ + +#include +#include +#include +#include +#include + +#include "pinctrl-rockchip.h" + +#define RK3368_PULL_GRF_OFFSET 0x100 +#define RK3368_PULL_PMU_OFFSET 0x10 + +static void rk3368_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl_priv *priv = bank->priv; + + /* The first 32 pins of the first bank are located in PMU */ + if (bank->bank_num == 0) { + *regmap = priv->regmap_pmu; + *reg = RK3368_PULL_PMU_OFFSET; + + *reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4); + *bit = pin_num % ROCKCHIP_PULL_PINS_PER_REG; + *bit *= ROCKCHIP_PULL_BITS_PER_PIN; + } else { + *regmap = priv->regmap_base; + *reg = RK3368_PULL_GRF_OFFSET; + + /* correct the offset, as we're starting with the 2nd bank */ + *reg -= 0x10; + *reg += bank->bank_num * ROCKCHIP_PULL_BANK_STRIDE; + *reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4); + + *bit = (pin_num % ROCKCHIP_PULL_PINS_PER_REG); + *bit *= ROCKCHIP_PULL_BITS_PER_PIN; + } +} + +#define RK3368_DRV_PMU_OFFSET 0x20 +#define RK3368_DRV_GRF_OFFSET 0x200 + +static void rk3368_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl_priv *priv = bank->priv; + + /* The first 32 pins of the first bank are located in PMU */ + if (bank->bank_num == 0) { + *regmap = priv->regmap_pmu; + *reg = RK3368_DRV_PMU_OFFSET; + + *reg += ((pin_num / ROCKCHIP_DRV_PINS_PER_REG) * 4); + *bit = pin_num % ROCKCHIP_DRV_PINS_PER_REG; + *bit *= ROCKCHIP_DRV_BITS_PER_PIN; + } else { + *regmap = priv->regmap_base; + *reg = RK3368_DRV_GRF_OFFSET; + + /* correct the offset, as we're starting with the 2nd bank */ + *reg -= 0x10; + *reg += bank->bank_num * ROCKCHIP_DRV_BANK_STRIDE; + *reg += ((pin_num / ROCKCHIP_DRV_PINS_PER_REG) * 4); + + *bit = (pin_num % ROCKCHIP_DRV_PINS_PER_REG); + *bit *= ROCKCHIP_DRV_BITS_PER_PIN; + } +} + +static struct rockchip_pin_bank rk3368_pin_banks[] = { + PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU + ), + PIN_BANK(1, 32, "gpio1"), + PIN_BANK(2, 32, "gpio2"), + PIN_BANK(3, 32, "gpio3"), +}; + +static struct rockchip_pin_ctrl rk3368_pin_ctrl = { + .pin_banks = rk3368_pin_banks, + .nr_banks = ARRAY_SIZE(rk3368_pin_banks), + .label = "RK3368-GPIO", + .type = RK3368, + .grf_mux_offset = 0x0, + .pmu_mux_offset = 0x0, + .pull_calc_reg = rk3368_calc_pull_reg_and_bit, + .drv_calc_reg = rk3368_calc_drv_reg_and_bit, +}; + +static const struct udevice_id rk3368_pinctrl_ids[] = { + { + .compatible = "rockchip,rk3368-pinctrl", + .data = (ulong)&rk3368_pin_ctrl + }, + { } +}; + +U_BOOT_DRIVER(pinctrl_rk3368) = { + .name = "rockchip_rk3368_pinctrl", + .id = UCLASS_PINCTRL, + .of_match = rk3368_pinctrl_ids, + .priv_auto_alloc_size = sizeof(struct rockchip_pinctrl_priv), + .ops = &rockchip_pinctrl_ops, +#if !CONFIG_IS_ENABLED(OF_PLATDATA) + .bind = dm_scan_fdt_dev, +#endif + .probe = rockchip_pinctrl_probe, +}; diff --git a/drivers/pinctrl/rockchip/pinctrl-rk3399.c b/drivers/pinctrl/rockchip/pinctrl-rk3399.c new file mode 100644 index 0000000000..c5aab647a5 --- /dev/null +++ b/drivers/pinctrl/rockchip/pinctrl-rk3399.c @@ -0,0 +1,193 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2019 Rockchip Electronics Co., Ltd + */ + +#include +#include +#include +#include +#include + +#include "pinctrl-rockchip.h" + +static struct rockchip_mux_route_data rk3399_mux_route_data[] = { + { + /* uart2dbga_rx */ + .bank_num = 4, + .pin = 8, + .func = 2, + .route_offset = 0xe21c, + .route_val = BIT(16 + 10) | BIT(16 + 11), + }, { + /* uart2dbgb_rx */ + .bank_num = 4, + .pin = 16, + .func = 2, + .route_offset = 0xe21c, + .route_val = BIT(16 + 10) | BIT(16 + 11) | BIT(10), + }, { + /* uart2dbgc_rx */ + .bank_num = 4, + .pin = 19, + .func = 1, + .route_offset = 0xe21c, + .route_val = BIT(16 + 10) | BIT(16 + 11) | BIT(11), + }, { + /* pcie_clkreqn */ + .bank_num = 2, + .pin = 26, + .func = 2, + .route_offset = 0xe21c, + .route_val = BIT(16 + 14), + }, { + /* pcie_clkreqnb */ + .bank_num = 4, + .pin = 24, + .func = 1, + .route_offset = 0xe21c, + .route_val = BIT(16 + 14) | BIT(14), + }, +}; + +#define RK3399_PULL_GRF_OFFSET 0xe040 +#define RK3399_PULL_PMU_OFFSET 0x40 + +static void rk3399_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl_priv *priv = bank->priv; + + /* The bank0:16 and bank1:32 pins are located in PMU */ + if (bank->bank_num == 0 || bank->bank_num == 1) { + *regmap = priv->regmap_pmu; + *reg = RK3399_PULL_PMU_OFFSET; + + *reg += bank->bank_num * ROCKCHIP_PULL_BANK_STRIDE; + + *reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4); + *bit = pin_num % ROCKCHIP_PULL_PINS_PER_REG; + *bit *= ROCKCHIP_PULL_BITS_PER_PIN; + } else { + *regmap = priv->regmap_base; + *reg = RK3399_PULL_GRF_OFFSET; + + /* correct the offset, as we're starting with the 3rd bank */ + *reg -= 0x20; + *reg += bank->bank_num * ROCKCHIP_PULL_BANK_STRIDE; + *reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4); + + *bit = (pin_num % ROCKCHIP_PULL_PINS_PER_REG); + *bit *= ROCKCHIP_PULL_BITS_PER_PIN; + } +} + +static void rk3399_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl_priv *priv = bank->priv; + int drv_num = (pin_num / 8); + + /* The bank0:16 and bank1:32 pins are located in PMU */ + if (bank->bank_num == 0 || bank->bank_num == 1) + *regmap = priv->regmap_pmu; + else + *regmap = priv->regmap_base; + + *reg = bank->drv[drv_num].offset; + if (bank->drv[drv_num].drv_type == DRV_TYPE_IO_1V8_3V0_AUTO || + bank->drv[drv_num].drv_type == DRV_TYPE_IO_3V3_ONLY) + *bit = (pin_num % 8) * 3; + else + *bit = (pin_num % 8) * 2; +} + +static struct rockchip_pin_bank rk3399_pin_banks[] = { + PIN_BANK_IOMUX_FLAGS_DRV_FLAGS_OFFSET_PULL_FLAGS(0, 32, "gpio0", + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + DRV_TYPE_IO_1V8_ONLY, + DRV_TYPE_IO_1V8_ONLY, + DRV_TYPE_IO_DEFAULT, + DRV_TYPE_IO_DEFAULT, + 0x80, + 0x88, + -1, + -1, + PULL_TYPE_IO_1V8_ONLY, + PULL_TYPE_IO_1V8_ONLY, + PULL_TYPE_IO_DEFAULT, + PULL_TYPE_IO_DEFAULT + ), + PIN_BANK_IOMUX_DRV_FLAGS_OFFSET(1, 32, "gpio1", IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + DRV_TYPE_IO_1V8_OR_3V0, + DRV_TYPE_IO_1V8_OR_3V0, + DRV_TYPE_IO_1V8_OR_3V0, + DRV_TYPE_IO_1V8_OR_3V0, + 0xa0, + 0xa8, + 0xb0, + 0xb8 + ), + PIN_BANK_DRV_FLAGS_PULL_FLAGS(2, 32, "gpio2", DRV_TYPE_IO_1V8_OR_3V0, + DRV_TYPE_IO_1V8_OR_3V0, + DRV_TYPE_IO_1V8_ONLY, + DRV_TYPE_IO_1V8_ONLY, + PULL_TYPE_IO_DEFAULT, + PULL_TYPE_IO_DEFAULT, + PULL_TYPE_IO_1V8_ONLY, + PULL_TYPE_IO_1V8_ONLY + ), + PIN_BANK_DRV_FLAGS(3, 32, "gpio3", DRV_TYPE_IO_3V3_ONLY, + DRV_TYPE_IO_3V3_ONLY, + DRV_TYPE_IO_3V3_ONLY, + DRV_TYPE_IO_1V8_OR_3V0 + ), + PIN_BANK_DRV_FLAGS(4, 32, "gpio4", DRV_TYPE_IO_1V8_OR_3V0, + DRV_TYPE_IO_1V8_3V0_AUTO, + DRV_TYPE_IO_1V8_OR_3V0, + DRV_TYPE_IO_1V8_OR_3V0 + ), +}; + +static struct rockchip_pin_ctrl rk3399_pin_ctrl = { + .pin_banks = rk3399_pin_banks, + .nr_banks = ARRAY_SIZE(rk3399_pin_banks), + .label = "RK3399-GPIO", + .type = RK3399, + .grf_mux_offset = 0xe000, + .pmu_mux_offset = 0x0, + .grf_drv_offset = 0xe100, + .pmu_drv_offset = 0x80, + .iomux_routes = rk3399_mux_route_data, + .niomux_routes = ARRAY_SIZE(rk3399_mux_route_data), + .pull_calc_reg = rk3399_calc_pull_reg_and_bit, + .drv_calc_reg = rk3399_calc_drv_reg_and_bit, +}; + +static const struct udevice_id rk3399_pinctrl_ids[] = { + { + .compatible = "rockchip,rk3399-pinctrl", + .data = (ulong)&rk3399_pin_ctrl + }, + { } +}; + +U_BOOT_DRIVER(pinctrl_rk3399) = { + .name = "rockchip_rk3399_pinctrl", + .id = UCLASS_PINCTRL, + .of_match = rk3399_pinctrl_ids, + .priv_auto_alloc_size = sizeof(struct rockchip_pinctrl_priv), + .ops = &rockchip_pinctrl_ops, +#if !CONFIG_IS_ENABLED(OF_PLATDATA) + .bind = dm_scan_fdt_dev, +#endif + .probe = rockchip_pinctrl_probe, +}; diff --git a/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c b/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c new file mode 100644 index 0000000000..b84b079064 --- /dev/null +++ b/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c @@ -0,0 +1,788 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2019 Rockchip Electronics Co., Ltd + */ + +#include +#include +#include +#include +#include +#include + +#include "pinctrl-rockchip.h" + +#define MAX_ROCKCHIP_PINS_ENTRIES 30 +#define MAX_ROCKCHIP_GPIO_PER_BANK 32 +#define RK_FUNC_GPIO 0 + +static int rockchip_verify_config(struct udevice *dev, u32 bank, u32 pin) +{ + struct rockchip_pinctrl_priv *priv = dev_get_priv(dev); + struct rockchip_pin_ctrl *ctrl = priv->ctrl; + + if (bank >= ctrl->nr_banks) { + debug("pin conf bank %d >= nbanks %d\n", bank, ctrl->nr_banks); + return -EINVAL; + } + + if (pin >= MAX_ROCKCHIP_GPIO_PER_BANK) { + debug("pin conf pin %d >= %d\n", pin, + MAX_ROCKCHIP_GPIO_PER_BANK); + return -EINVAL; + } + + return 0; +} + +static void rockchip_get_recalced_mux(struct rockchip_pin_bank *bank, int pin, + int *reg, u8 *bit, int *mask) +{ + struct rockchip_pinctrl_priv *priv = bank->priv; + struct rockchip_pin_ctrl *ctrl = priv->ctrl; + struct rockchip_mux_recalced_data *data; + int i; + + for (i = 0; i < ctrl->niomux_recalced; i++) { + data = &ctrl->iomux_recalced[i]; + if (data->num == bank->bank_num && + data->pin == pin) + break; + } + + if (i >= ctrl->niomux_recalced) + return; + + *reg = data->reg; + *mask = data->mask; + *bit = data->bit; +} + +static bool rockchip_get_mux_route(struct rockchip_pin_bank *bank, int pin, + int mux, u32 *reg, u32 *value) +{ + struct rockchip_pinctrl_priv *priv = bank->priv; + struct rockchip_pin_ctrl *ctrl = priv->ctrl; + struct rockchip_mux_route_data *data; + int i; + + for (i = 0; i < ctrl->niomux_routes; i++) { + data = &ctrl->iomux_routes[i]; + if (data->bank_num == bank->bank_num && + data->pin == pin && data->func == mux) + break; + } + + if (i >= ctrl->niomux_routes) + return false; + + *reg = data->route_offset; + *value = data->route_val; + + return true; +} + +static int rockchip_get_mux_data(int mux_type, int pin, u8 *bit, int *mask) +{ + int offset = 0; + + if (mux_type & IOMUX_WIDTH_4BIT) { + if ((pin % 8) >= 4) + offset = 0x4; + *bit = (pin % 4) * 4; + *mask = 0xf; + } else if (mux_type & IOMUX_WIDTH_3BIT) { + /* + * pin0 ~ pin4 are at first register, and + * pin5 ~ pin7 are at second register. + */ + if ((pin % 8) >= 5) + offset = 0x4; + *bit = (pin % 8 % 5) * 3; + *mask = 0x7; + } else { + *bit = (pin % 8) * 2; + *mask = 0x3; + } + + return offset; +} + +static int rockchip_get_mux(struct rockchip_pin_bank *bank, int pin) +{ + struct rockchip_pinctrl_priv *priv = bank->priv; + int iomux_num = (pin / 8); + struct regmap *regmap; + unsigned int val; + int reg, ret, mask, mux_type; + u8 bit; + + if (iomux_num > 3) + return -EINVAL; + + if (bank->iomux[iomux_num].type & IOMUX_UNROUTED) { + debug("pin %d is unrouted\n", pin); + return -EINVAL; + } + + if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY) + return RK_FUNC_GPIO; + + regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU) + ? priv->regmap_pmu : priv->regmap_base; + + /* get basic quadrupel of mux registers and the correct reg inside */ + mux_type = bank->iomux[iomux_num].type; + reg = bank->iomux[iomux_num].offset; + reg += rockchip_get_mux_data(mux_type, pin, &bit, &mask); + + if (bank->recalced_mask & BIT(pin)) + rockchip_get_recalced_mux(bank, pin, ®, &bit, &mask); + + ret = regmap_read(regmap, reg, &val); + if (ret) + return ret; + + return ((val >> bit) & mask); +} + +static int rockchip_pinctrl_get_gpio_mux(struct udevice *dev, int banknum, + int index) +{ struct rockchip_pinctrl_priv *priv = dev_get_priv(dev); + struct rockchip_pin_ctrl *ctrl = priv->ctrl; + + return rockchip_get_mux(&ctrl->pin_banks[banknum], index); +} + +static int rockchip_verify_mux(struct rockchip_pin_bank *bank, + int pin, int mux) +{ + int iomux_num = (pin / 8); + + if (iomux_num > 3) + return -EINVAL; + + if (bank->iomux[iomux_num].type & IOMUX_UNROUTED) { + debug("pin %d is unrouted\n", pin); + return -EINVAL; + } + + if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY) { + if (mux != IOMUX_GPIO_ONLY) { + debug("pin %d only supports a gpio mux\n", pin); + return -ENOTSUPP; + } + } + + return 0; +} + +/* + * Set a new mux function for a pin. + * + * The register is divided into the upper and lower 16 bit. When changing + * a value, the previous register value is not read and changed. Instead + * it seems the changed bits are marked in the upper 16 bit, while the + * changed value gets set in the same offset in the lower 16 bit. + * All pin settings seem to be 2 bit wide in both the upper and lower + * parts. + * @bank: pin bank to change + * @pin: pin to change + * @mux: new mux function to set + */ +static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux) +{ + struct rockchip_pinctrl_priv *priv = bank->priv; + int iomux_num = (pin / 8); + struct regmap *regmap; + int reg, ret, mask, mux_type; + u8 bit; + u32 data, route_reg, route_val; + + ret = rockchip_verify_mux(bank, pin, mux); + if (ret < 0) + return ret; + + if (bank->iomux[iomux_num].type & IOMUX_GPIO_ONLY) + return 0; + + debug("setting mux of GPIO%d-%d to %d\n", bank->bank_num, pin, mux); + + regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU) + ? priv->regmap_pmu : priv->regmap_base; + + /* get basic quadrupel of mux registers and the correct reg inside */ + mux_type = bank->iomux[iomux_num].type; + reg = bank->iomux[iomux_num].offset; + reg += rockchip_get_mux_data(mux_type, pin, &bit, &mask); + + if (bank->recalced_mask & BIT(pin)) + rockchip_get_recalced_mux(bank, pin, ®, &bit, &mask); + + if (bank->route_mask & BIT(pin)) { + if (rockchip_get_mux_route(bank, pin, mux, &route_reg, + &route_val)) { + ret = regmap_write(regmap, route_reg, route_val); + if (ret) + return ret; + } + } + + data = (mask << (bit + 16)); + data |= (mux & mask) << bit; + ret = regmap_write(regmap, reg, data); + + return ret; +} + +static int rockchip_perpin_drv_list[DRV_TYPE_MAX][8] = { + { 2, 4, 8, 12, -1, -1, -1, -1 }, + { 3, 6, 9, 12, -1, -1, -1, -1 }, + { 5, 10, 15, 20, -1, -1, -1, -1 }, + { 4, 6, 8, 10, 12, 14, 16, 18 }, + { 4, 7, 10, 13, 16, 19, 22, 26 } +}; + +static int rockchip_set_drive_perpin(struct rockchip_pin_bank *bank, + int pin_num, int strength) +{ + struct rockchip_pinctrl_priv *priv = bank->priv; + struct rockchip_pin_ctrl *ctrl = priv->ctrl; + struct regmap *regmap; + int reg, ret, i; + u32 data, rmask_bits, temp; + u8 bit; + int drv_type = bank->drv[pin_num / 8].drv_type; + + debug("setting drive of GPIO%d-%d to %d\n", bank->bank_num, + pin_num, strength); + + ctrl->drv_calc_reg(bank, pin_num, ®map, ®, &bit); + + ret = -EINVAL; + for (i = 0; i < ARRAY_SIZE(rockchip_perpin_drv_list[drv_type]); i++) { + if (rockchip_perpin_drv_list[drv_type][i] == strength) { + ret = i; + break; + } else if (rockchip_perpin_drv_list[drv_type][i] < 0) { + ret = rockchip_perpin_drv_list[drv_type][i]; + break; + } + } + + if (ret < 0) { + debug("unsupported driver strength %d\n", strength); + return ret; + } + + switch (drv_type) { + case DRV_TYPE_IO_1V8_3V0_AUTO: + case DRV_TYPE_IO_3V3_ONLY: + rmask_bits = ROCKCHIP_DRV_3BITS_PER_PIN; + switch (bit) { + case 0 ... 12: + /* regular case, nothing to do */ + break; + case 15: + /* + * drive-strength offset is special, as it is spread + * over 2 registers, the bit data[15] contains bit 0 + * of the value while temp[1:0] contains bits 2 and 1 + */ + data = (ret & 0x1) << 15; + temp = (ret >> 0x1) & 0x3; + + data |= BIT(31); + ret = regmap_write(regmap, reg, data); + if (ret) + return ret; + + temp |= (0x3 << 16); + reg += 0x4; + ret = regmap_write(regmap, reg, temp); + + return ret; + case 18 ... 21: + /* setting fully enclosed in the second register */ + reg += 4; + bit -= 16; + break; + default: + debug("unsupported bit: %d for pinctrl drive type: %d\n", + bit, drv_type); + return -EINVAL; + } + break; + case DRV_TYPE_IO_DEFAULT: + case DRV_TYPE_IO_1V8_OR_3V0: + case DRV_TYPE_IO_1V8_ONLY: + rmask_bits = ROCKCHIP_DRV_BITS_PER_PIN; + break; + default: + debug("unsupported pinctrl drive type: %d\n", + drv_type); + return -EINVAL; + } + + /* enable the write to the equivalent lower bits */ + data = ((1 << rmask_bits) - 1) << (bit + 16); + data |= (ret << bit); + + ret = regmap_write(regmap, reg, data); + return ret; +} + +static int rockchip_pull_list[PULL_TYPE_MAX][4] = { + { + PIN_CONFIG_BIAS_DISABLE, + PIN_CONFIG_BIAS_PULL_UP, + PIN_CONFIG_BIAS_PULL_DOWN, + PIN_CONFIG_BIAS_BUS_HOLD + }, + { + PIN_CONFIG_BIAS_DISABLE, + PIN_CONFIG_BIAS_PULL_DOWN, + PIN_CONFIG_BIAS_DISABLE, + PIN_CONFIG_BIAS_PULL_UP + }, +}; + +static int rockchip_set_pull(struct rockchip_pin_bank *bank, + int pin_num, int pull) +{ + struct rockchip_pinctrl_priv *priv = bank->priv; + struct rockchip_pin_ctrl *ctrl = priv->ctrl; + struct regmap *regmap; + int reg, ret, i, pull_type; + u8 bit; + u32 data; + + debug("setting pull of GPIO%d-%d to %d\n", bank->bank_num, + pin_num, pull); + + ctrl->pull_calc_reg(bank, pin_num, ®map, ®, &bit); + + switch (ctrl->type) { + case RK3036: + case RK3128: + data = BIT(bit + 16); + if (pull == PIN_CONFIG_BIAS_DISABLE) + data |= BIT(bit); + ret = regmap_write(regmap, reg, data); + break; + case RV1108: + case RK3188: + case RK3288: + case RK3368: + case RK3399: + pull_type = bank->pull_type[pin_num / 8]; + ret = -EINVAL; + for (i = 0; i < ARRAY_SIZE(rockchip_pull_list[pull_type]); + i++) { + if (rockchip_pull_list[pull_type][i] == pull) { + ret = i; + break; + } + } + + if (ret < 0) { + debug("unsupported pull setting %d\n", pull); + return ret; + } + + /* enable the write to the equivalent lower bits */ + data = ((1 << ROCKCHIP_PULL_BITS_PER_PIN) - 1) << (bit + 16); + data |= (ret << bit); + + ret = regmap_write(regmap, reg, data); + break; + default: + debug("unsupported pinctrl type\n"); + return -EINVAL; + } + + return ret; +} + +static int rockchip_set_schmitt(struct rockchip_pin_bank *bank, + int pin_num, int enable) +{ + struct rockchip_pinctrl_priv *priv = bank->priv; + struct rockchip_pin_ctrl *ctrl = priv->ctrl; + struct regmap *regmap; + int reg, ret; + u8 bit; + u32 data; + + debug("setting input schmitt of GPIO%d-%d to %d\n", bank->bank_num, + pin_num, enable); + + ret = ctrl->schmitt_calc_reg(bank, pin_num, ®map, ®, &bit); + if (ret) + return ret; + + /* enable the write to the equivalent lower bits */ + data = BIT(bit + 16) | (enable << bit); + + return regmap_write(regmap, reg, data); +} + +/* + * Pinconf_ops handling + */ +static bool rockchip_pinconf_pull_valid(struct rockchip_pin_ctrl *ctrl, + unsigned int pull) +{ + switch (ctrl->type) { + case RK3036: + case RK3128: + return (pull == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT || + pull == PIN_CONFIG_BIAS_DISABLE); + case RV1108: + case RK3188: + case RK3288: + case RK3368: + case RK3399: + return (pull != PIN_CONFIG_BIAS_PULL_PIN_DEFAULT); + } + + return false; +} + +/* set the pin config settings for a specified pin */ +static int rockchip_pinconf_set(struct rockchip_pin_bank *bank, + u32 pin, u32 param, u32 arg) +{ + struct rockchip_pinctrl_priv *priv = bank->priv; + struct rockchip_pin_ctrl *ctrl = priv->ctrl; + int rc; + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + rc = rockchip_set_pull(bank, pin, param); + if (rc) + return rc; + break; + + case PIN_CONFIG_BIAS_PULL_UP: + case PIN_CONFIG_BIAS_PULL_DOWN: + case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: + case PIN_CONFIG_BIAS_BUS_HOLD: + if (!rockchip_pinconf_pull_valid(ctrl, param)) + return -ENOTSUPP; + + if (!arg) + return -EINVAL; + + rc = rockchip_set_pull(bank, pin, param); + if (rc) + return rc; + break; + + case PIN_CONFIG_DRIVE_STRENGTH: + if (!ctrl->drv_calc_reg) + return -ENOTSUPP; + + rc = rockchip_set_drive_perpin(bank, pin, arg); + if (rc < 0) + return rc; + break; + + case PIN_CONFIG_INPUT_SCHMITT_ENABLE: + if (!ctrl->schmitt_calc_reg) + return -ENOTSUPP; + + rc = rockchip_set_schmitt(bank, pin, arg); + if (rc < 0) + return rc; + break; + + default: + break; + } + + return 0; +} + +static const struct pinconf_param rockchip_conf_params[] = { + { "bias-disable", PIN_CONFIG_BIAS_DISABLE, 0 }, + { "bias-bus-hold", PIN_CONFIG_BIAS_BUS_HOLD, 0 }, + { "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 }, + { "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 1 }, + { "drive-strength", PIN_CONFIG_DRIVE_STRENGTH, 0 }, + { "input-enable", PIN_CONFIG_INPUT_ENABLE, 1 }, + { "input-disable", PIN_CONFIG_INPUT_ENABLE, 0 }, + { "input-schmitt-disable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 0 }, + { "input-schmitt-enable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 }, +}; + +static int rockchip_pinconf_prop_name_to_param(const char *property, + u32 *default_value) +{ + const struct pinconf_param *p, *end; + + p = rockchip_conf_params; + end = p + sizeof(rockchip_conf_params) / sizeof(struct pinconf_param); + + /* See if this pctldev supports this parameter */ + for (; p < end; p++) { + if (!strcmp(property, p->property)) { + *default_value = p->default_value; + return p->param; + } + } + + *default_value = 0; + return -EPERM; +} + +static int rockchip_pinctrl_set_state(struct udevice *dev, + struct udevice *config) +{ + struct rockchip_pinctrl_priv *priv = dev_get_priv(dev); + struct rockchip_pin_ctrl *ctrl = priv->ctrl; + u32 cells[MAX_ROCKCHIP_PINS_ENTRIES * 4]; + u32 bank, pin, mux, conf, arg, default_val; + int ret, count, i; + const char *prop_name; + const void *value; + int prop_len, param; + const u32 *data; + ofnode node; +#ifdef CONFIG_OF_LIVE + const struct device_node *np; + struct property *pp; +#else + int property_offset, pcfg_node; + const void *blob = gd->fdt_blob; +#endif + data = dev_read_prop(config, "rockchip,pins", &count); + if (count < 0) { + debug("%s: bad array size %d\n", __func__, count); + return -EINVAL; + } + + count /= sizeof(u32); + if (count > MAX_ROCKCHIP_PINS_ENTRIES * 4) { + debug("%s: unsupported pins array count %d\n", + __func__, count); + return -EINVAL; + } + + for (i = 0; i < count; i++) + cells[i] = fdt32_to_cpu(data[i]); + + for (i = 0; i < (count >> 2); i++) { + bank = cells[4 * i + 0]; + pin = cells[4 * i + 1]; + mux = cells[4 * i + 2]; + conf = cells[4 * i + 3]; + + ret = rockchip_verify_config(dev, bank, pin); + if (ret) + return ret; + + ret = rockchip_set_mux(&ctrl->pin_banks[bank], pin, mux); + if (ret) + return ret; + + node = ofnode_get_by_phandle(conf); + if (!ofnode_valid(node)) + return -ENODEV; +#ifdef CONFIG_OF_LIVE + np = ofnode_to_np(node); + for (pp = np->properties; pp; pp = pp->next) { + prop_name = pp->name; + prop_len = pp->length; + value = pp->value; +#else + pcfg_node = ofnode_to_offset(node); + fdt_for_each_property_offset(property_offset, blob, pcfg_node) { + value = fdt_getprop_by_offset(blob, property_offset, + &prop_name, &prop_len); + if (!value) + return -ENOENT; +#endif + param = rockchip_pinconf_prop_name_to_param(prop_name, + &default_val); + if (param < 0) + break; + + if (prop_len >= sizeof(fdt32_t)) + arg = fdt32_to_cpu(*(fdt32_t *)value); + else + arg = default_val; + + ret = rockchip_pinconf_set(&ctrl->pin_banks[bank], pin, + param, arg); + if (ret) { + debug("%s: rockchip_pinconf_set fail: %d\n", + __func__, ret); + return ret; + } + } + } + + return 0; +} + +const struct pinctrl_ops rockchip_pinctrl_ops = { + .set_state = rockchip_pinctrl_set_state, + .get_gpio_mux = rockchip_pinctrl_get_gpio_mux, +}; + +/* retrieve the soc specific data */ +static struct rockchip_pin_ctrl *rockchip_pinctrl_get_soc_data(struct udevice *dev) +{ + struct rockchip_pinctrl_priv *priv = dev_get_priv(dev); + struct rockchip_pin_ctrl *ctrl = + (struct rockchip_pin_ctrl *)dev_get_driver_data(dev); + struct rockchip_pin_bank *bank; + int grf_offs, pmu_offs, drv_grf_offs, drv_pmu_offs, i, j; + + grf_offs = ctrl->grf_mux_offset; + pmu_offs = ctrl->pmu_mux_offset; + drv_pmu_offs = ctrl->pmu_drv_offset; + drv_grf_offs = ctrl->grf_drv_offset; + bank = ctrl->pin_banks; + + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) { + int bank_pins = 0; + + bank->priv = priv; + bank->pin_base = ctrl->nr_pins; + ctrl->nr_pins += bank->nr_pins; + + /* calculate iomux and drv offsets */ + for (j = 0; j < 4; j++) { + struct rockchip_iomux *iom = &bank->iomux[j]; + struct rockchip_drv *drv = &bank->drv[j]; + int inc; + + if (bank_pins >= bank->nr_pins) + break; + + /* preset iomux offset value, set new start value */ + if (iom->offset >= 0) { + if (iom->type & IOMUX_SOURCE_PMU) + pmu_offs = iom->offset; + else + grf_offs = iom->offset; + } else { /* set current iomux offset */ + iom->offset = (iom->type & IOMUX_SOURCE_PMU) ? + pmu_offs : grf_offs; + } + + /* preset drv offset value, set new start value */ + if (drv->offset >= 0) { + if (iom->type & IOMUX_SOURCE_PMU) + drv_pmu_offs = drv->offset; + else + drv_grf_offs = drv->offset; + } else { /* set current drv offset */ + drv->offset = (iom->type & IOMUX_SOURCE_PMU) ? + drv_pmu_offs : drv_grf_offs; + } + + debug("bank %d, iomux %d has iom_offset 0x%x drv_offset 0x%x\n", + i, j, iom->offset, drv->offset); + + /* + * Increase offset according to iomux width. + * 4bit iomux'es are spread over two registers. + */ + inc = (iom->type & (IOMUX_WIDTH_4BIT | + IOMUX_WIDTH_3BIT)) ? 8 : 4; + if (iom->type & IOMUX_SOURCE_PMU) + pmu_offs += inc; + else + grf_offs += inc; + + /* + * Increase offset according to drv width. + * 3bit drive-strenth'es are spread over two registers. + */ + if ((drv->drv_type == DRV_TYPE_IO_1V8_3V0_AUTO) || + (drv->drv_type == DRV_TYPE_IO_3V3_ONLY)) + inc = 8; + else + inc = 4; + + if (iom->type & IOMUX_SOURCE_PMU) + drv_pmu_offs += inc; + else + drv_grf_offs += inc; + + bank_pins += 8; + } + + /* calculate the per-bank recalced_mask */ + for (j = 0; j < ctrl->niomux_recalced; j++) { + int pin = 0; + + if (ctrl->iomux_recalced[j].num == bank->bank_num) { + pin = ctrl->iomux_recalced[j].pin; + bank->recalced_mask |= BIT(pin); + } + } + + /* calculate the per-bank route_mask */ + for (j = 0; j < ctrl->niomux_routes; j++) { + int pin = 0; + + if (ctrl->iomux_routes[j].bank_num == bank->bank_num) { + pin = ctrl->iomux_routes[j].pin; + bank->route_mask |= BIT(pin); + } + } + } + + return ctrl; +} + +int rockchip_pinctrl_probe(struct udevice *dev) +{ + struct rockchip_pinctrl_priv *priv = dev_get_priv(dev); + struct rockchip_pin_ctrl *ctrl; + struct udevice *syscon; + struct regmap *regmap; + int ret = 0; + + /* get rockchip grf syscon phandle */ + ret = uclass_get_device_by_phandle(UCLASS_SYSCON, dev, "rockchip,grf", + &syscon); + if (ret) { + debug("unable to find rockchip,grf syscon device (%d)\n", ret); + return ret; + } + + /* get grf-reg base address */ + regmap = syscon_get_regmap(syscon); + if (!regmap) { + debug("unable to find rockchip grf regmap\n"); + return -ENODEV; + } + priv->regmap_base = regmap; + + /* option: get pmu-reg base address */ + ret = uclass_get_device_by_phandle(UCLASS_SYSCON, dev, "rockchip,pmu", + &syscon); + if (!ret) { + /* get pmugrf-reg base address */ + regmap = syscon_get_regmap(syscon); + if (!regmap) { + debug("unable to find rockchip pmu regmap\n"); + return -ENODEV; + } + priv->regmap_pmu = regmap; + } + + ctrl = rockchip_pinctrl_get_soc_data(dev); + if (!ctrl) { + debug("driver data not available\n"); + return -EINVAL; + } + + priv->ctrl = ctrl; + return 0; +} diff --git a/drivers/pinctrl/rockchip/pinctrl-rockchip.h b/drivers/pinctrl/rockchip/pinctrl-rockchip.h new file mode 100644 index 0000000000..bc809630c1 --- /dev/null +++ b/drivers/pinctrl/rockchip/pinctrl-rockchip.h @@ -0,0 +1,302 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2019 Rockchip Electronics Co., Ltd + */ + +#ifndef __DRIVERS_PINCTRL_ROCKCHIP_H +#define __DRIVERS_PINCTRL_ROCKCHIP_H + +#include + +enum rockchip_pinctrl_type { + RV1108, + RK3036, + RK3128, + RK3188, + RK3288, + RK3368, + RK3399, +}; + +/** + * Encode variants of iomux registers into a type variable + */ +#define IOMUX_GPIO_ONLY BIT(0) +#define IOMUX_WIDTH_4BIT BIT(1) +#define IOMUX_SOURCE_PMU BIT(2) +#define IOMUX_UNROUTED BIT(3) +#define IOMUX_WIDTH_3BIT BIT(4) + +/** + * Defined some common pins constants + */ +#define ROCKCHIP_PULL_BITS_PER_PIN 2 +#define ROCKCHIP_PULL_PINS_PER_REG 8 +#define ROCKCHIP_PULL_BANK_STRIDE 16 +#define ROCKCHIP_DRV_BITS_PER_PIN 2 +#define ROCKCHIP_DRV_PINS_PER_REG 8 +#define ROCKCHIP_DRV_BANK_STRIDE 16 +#define ROCKCHIP_DRV_3BITS_PER_PIN 3 + +/** + * @type: iomux variant using IOMUX_* constants + * @offset: if initialized to -1 it will be autocalculated, by specifying + * an initial offset value the relevant source offset can be reset + * to a new value for autocalculating the following iomux registers. + */ +struct rockchip_iomux { + int type; + int offset; +}; + +/** + * enum type index corresponding to rockchip_perpin_drv_list arrays index. + */ +enum rockchip_pin_drv_type { + DRV_TYPE_IO_DEFAULT = 0, + DRV_TYPE_IO_1V8_OR_3V0, + DRV_TYPE_IO_1V8_ONLY, + DRV_TYPE_IO_1V8_3V0_AUTO, + DRV_TYPE_IO_3V3_ONLY, + DRV_TYPE_MAX +}; + +/** + * enum type index corresponding to rockchip_pull_list arrays index. + */ +enum rockchip_pin_pull_type { + PULL_TYPE_IO_DEFAULT = 0, + PULL_TYPE_IO_1V8_ONLY, + PULL_TYPE_MAX +}; + +/** + * @drv_type: drive strength variant using rockchip_perpin_drv_type + * @offset: if initialized to -1 it will be autocalculated, by specifying + * an initial offset value the relevant source offset can be reset + * to a new value for autocalculating the following drive strength + * registers. if used chips own cal_drv func instead to calculate + * registers offset, the variant could be ignored. + */ +struct rockchip_drv { + enum rockchip_pin_drv_type drv_type; + int offset; +}; + +/** + * @priv: common pinctrl private basedata + * @pin_base: first pin number + * @nr_pins: number of pins in this bank + * @name: name of the bank + * @bank_num: number of the bank, to account for holes + * @iomux: array describing the 4 iomux sources of the bank + * @drv: array describing the 4 drive strength sources of the bank + * @pull_type: array describing the 4 pull type sources of the bank + * @recalced_mask: bits describing the mux recalced pins of per bank + * @route_mask: bits describing the routing pins of per bank + */ +struct rockchip_pin_bank { + struct rockchip_pinctrl_priv *priv; + u32 pin_base; + u8 nr_pins; + char *name; + u8 bank_num; + struct rockchip_iomux iomux[4]; + struct rockchip_drv drv[4]; + enum rockchip_pin_pull_type pull_type[4]; + u32 recalced_mask; + u32 route_mask; +}; + +#define PIN_BANK(id, pins, label) \ + { \ + .bank_num = id, \ + .nr_pins = pins, \ + .name = label, \ + .iomux = { \ + { .offset = -1 }, \ + { .offset = -1 }, \ + { .offset = -1 }, \ + { .offset = -1 }, \ + }, \ + } + +#define PIN_BANK_IOMUX_FLAGS(id, pins, label, iom0, iom1, iom2, iom3) \ + { \ + .bank_num = id, \ + .nr_pins = pins, \ + .name = label, \ + .iomux = { \ + { .type = iom0, .offset = -1 }, \ + { .type = iom1, .offset = -1 }, \ + { .type = iom2, .offset = -1 }, \ + { .type = iom3, .offset = -1 }, \ + }, \ + } + +#define PIN_BANK_DRV_FLAGS(id, pins, label, type0, type1, type2, type3) \ + { \ + .bank_num = id, \ + .nr_pins = pins, \ + .name = label, \ + .iomux = { \ + { .offset = -1 }, \ + { .offset = -1 }, \ + { .offset = -1 }, \ + { .offset = -1 }, \ + }, \ + .drv = { \ + { .drv_type = type0, .offset = -1 }, \ + { .drv_type = type1, .offset = -1 }, \ + { .drv_type = type2, .offset = -1 }, \ + { .drv_type = type3, .offset = -1 }, \ + }, \ + } + +#define PIN_BANK_DRV_FLAGS_PULL_FLAGS(id, pins, label, drv0, drv1, \ + drv2, drv3, pull0, pull1, \ + pull2, pull3) \ + { \ + .bank_num = id, \ + .nr_pins = pins, \ + .name = label, \ + .iomux = { \ + { .offset = -1 }, \ + { .offset = -1 }, \ + { .offset = -1 }, \ + { .offset = -1 }, \ + }, \ + .drv = { \ + { .drv_type = drv0, .offset = -1 }, \ + { .drv_type = drv1, .offset = -1 }, \ + { .drv_type = drv2, .offset = -1 }, \ + { .drv_type = drv3, .offset = -1 }, \ + }, \ + .pull_type[0] = pull0, \ + .pull_type[1] = pull1, \ + .pull_type[2] = pull2, \ + .pull_type[3] = pull3, \ + } + +#define PIN_BANK_IOMUX_DRV_FLAGS_OFFSET(id, pins, label, iom0, iom1, \ + iom2, iom3, drv0, drv1, drv2, \ + drv3, offset0, offset1, \ + offset2, offset3) \ + { \ + .bank_num = id, \ + .nr_pins = pins, \ + .name = label, \ + .iomux = { \ + { .type = iom0, .offset = -1 }, \ + { .type = iom1, .offset = -1 }, \ + { .type = iom2, .offset = -1 }, \ + { .type = iom3, .offset = -1 }, \ + }, \ + .drv = { \ + { .drv_type = drv0, .offset = offset0 }, \ + { .drv_type = drv1, .offset = offset1 }, \ + { .drv_type = drv2, .offset = offset2 }, \ + { .drv_type = drv3, .offset = offset3 }, \ + }, \ + } + +#define PIN_BANK_IOMUX_FLAGS_DRV_FLAGS_OFFSET_PULL_FLAGS(id, pins, \ + label, iom0, iom1, iom2, \ + iom3, drv0, drv1, drv2, \ + drv3, offset0, offset1, \ + offset2, offset3, pull0, \ + pull1, pull2, pull3) \ + { \ + .bank_num = id, \ + .nr_pins = pins, \ + .name = label, \ + .iomux = { \ + { .type = iom0, .offset = -1 }, \ + { .type = iom1, .offset = -1 }, \ + { .type = iom2, .offset = -1 }, \ + { .type = iom3, .offset = -1 }, \ + }, \ + .drv = { \ + { .drv_type = drv0, .offset = offset0 }, \ + { .drv_type = drv1, .offset = offset1 }, \ + { .drv_type = drv2, .offset = offset2 }, \ + { .drv_type = drv3, .offset = offset3 }, \ + }, \ + .pull_type[0] = pull0, \ + .pull_type[1] = pull1, \ + .pull_type[2] = pull2, \ + .pull_type[3] = pull3, \ + } + +/** + * struct rockchip_mux_recalced_data: recalculate a pin iomux data. + * @num: bank number. + * @pin: pin number. + * @reg: register offset. + * @bit: index at register. + * @mask: mask bit + */ +struct rockchip_mux_recalced_data { + u8 num; + u8 pin; + u32 reg; + u8 bit; + u8 mask; +}; + +/** + * struct rockchip_mux_route_data: route a pin iomux data. + * @bank_num: bank number. + * @pin: index at register or used to calc index. + * @func: the min pin. + * @route_offset: the max pin. + * @route_val: the register offset. + */ +struct rockchip_mux_route_data { + u8 bank_num; + u8 pin; + u8 func; + u32 route_offset; + u32 route_val; +}; + +/** + */ +struct rockchip_pin_ctrl { + struct rockchip_pin_bank *pin_banks; + u32 nr_banks; + u32 nr_pins; + char *label; + enum rockchip_pinctrl_type type; + int grf_mux_offset; + int pmu_mux_offset; + int grf_drv_offset; + int pmu_drv_offset; + struct rockchip_mux_recalced_data *iomux_recalced; + u32 niomux_recalced; + struct rockchip_mux_route_data *iomux_routes; + u32 niomux_routes; + + void (*pull_calc_reg)(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit); + void (*drv_calc_reg)(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit); + int (*schmitt_calc_reg)(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit); +}; + +/** + */ +struct rockchip_pinctrl_priv { + struct rockchip_pin_ctrl *ctrl; + struct regmap *regmap_base; + struct regmap *regmap_pmu; +}; + +extern const struct pinctrl_ops rockchip_pinctrl_ops; +int rockchip_pinctrl_probe(struct udevice *dev); + +#endif /* __DRIVERS_PINCTRL_ROCKCHIP_H */ diff --git a/drivers/pinctrl/rockchip/pinctrl-rv1108.c b/drivers/pinctrl/rockchip/pinctrl-rv1108.c new file mode 100644 index 0000000000..f4a09a6824 --- /dev/null +++ b/drivers/pinctrl/rockchip/pinctrl-rv1108.c @@ -0,0 +1,203 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2019 Rockchip Electronics Co., Ltd + */ + +#include +#include +#include +#include +#include + +#include "pinctrl-rockchip.h" + +static struct rockchip_mux_recalced_data rv1108_mux_recalced_data[] = { + { + .num = 1, + .pin = 0, + .reg = 0x418, + .bit = 0, + .mask = 0x3 + }, { + .num = 1, + .pin = 1, + .reg = 0x418, + .bit = 2, + .mask = 0x3 + }, { + .num = 1, + .pin = 2, + .reg = 0x418, + .bit = 4, + .mask = 0x3 + }, { + .num = 1, + .pin = 3, + .reg = 0x418, + .bit = 6, + .mask = 0x3 + }, { + .num = 1, + .pin = 4, + .reg = 0x418, + .bit = 8, + .mask = 0x3 + }, { + .num = 1, + .pin = 5, + .reg = 0x418, + .bit = 10, + .mask = 0x3 + }, { + .num = 1, + .pin = 6, + .reg = 0x418, + .bit = 12, + .mask = 0x3 + }, { + .num = 1, + .pin = 7, + .reg = 0x418, + .bit = 14, + .mask = 0x3 + }, { + .num = 1, + .pin = 8, + .reg = 0x41c, + .bit = 0, + .mask = 0x3 + }, { + .num = 1, + .pin = 9, + .reg = 0x41c, + .bit = 2, + .mask = 0x3 + }, +}; + +#define RV1108_PULL_PMU_OFFSET 0x10 +#define RV1108_PULL_OFFSET 0x110 + +static void rv1108_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl_priv *priv = bank->priv; + + /* The first 24 pins of the first bank are located in PMU */ + if (bank->bank_num == 0) { + *regmap = priv->regmap_pmu; + *reg = RV1108_PULL_PMU_OFFSET; + } else { + *reg = RV1108_PULL_OFFSET; + *regmap = priv->regmap_base; + /* correct the offset, as we're starting with the 2nd bank */ + *reg -= 0x10; + *reg += bank->bank_num * ROCKCHIP_PULL_BANK_STRIDE; + } + + *reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4); + *bit = (pin_num % ROCKCHIP_PULL_PINS_PER_REG); + *bit *= ROCKCHIP_PULL_BITS_PER_PIN; +} + +#define RV1108_DRV_PMU_OFFSET 0x20 +#define RV1108_DRV_GRF_OFFSET 0x210 + +static void rv1108_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank, + int pin_num, struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl_priv *priv = bank->priv; + + /* The first 24 pins of the first bank are located in PMU */ + if (bank->bank_num == 0) { + *regmap = priv->regmap_pmu; + *reg = RV1108_DRV_PMU_OFFSET; + } else { + *regmap = priv->regmap_base; + *reg = RV1108_DRV_GRF_OFFSET; + + /* correct the offset, as we're starting with the 2nd bank */ + *reg -= 0x10; + *reg += bank->bank_num * ROCKCHIP_DRV_BANK_STRIDE; + } + + *reg += ((pin_num / ROCKCHIP_DRV_PINS_PER_REG) * 4); + *bit = pin_num % ROCKCHIP_DRV_PINS_PER_REG; + *bit *= ROCKCHIP_DRV_BITS_PER_PIN; +} + +#define RV1108_SCHMITT_PMU_OFFSET 0x30 +#define RV1108_SCHMITT_GRF_OFFSET 0x388 +#define RV1108_SCHMITT_BANK_STRIDE 8 +#define RV1108_SCHMITT_PINS_PER_GRF_REG 16 +#define RV1108_SCHMITT_PINS_PER_PMU_REG 8 + +static int rv1108_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank, + int pin_num, + struct regmap **regmap, + int *reg, u8 *bit) +{ + struct rockchip_pinctrl_priv *priv = bank->priv; + int pins_per_reg; + + if (bank->bank_num == 0) { + *regmap = priv->regmap_pmu; + *reg = RV1108_SCHMITT_PMU_OFFSET; + pins_per_reg = RV1108_SCHMITT_PINS_PER_PMU_REG; + } else { + *regmap = priv->regmap_base; + *reg = RV1108_SCHMITT_GRF_OFFSET; + pins_per_reg = RV1108_SCHMITT_PINS_PER_GRF_REG; + *reg += (bank->bank_num - 1) * RV1108_SCHMITT_BANK_STRIDE; + } + *reg += ((pin_num / pins_per_reg) * 4); + *bit = pin_num % pins_per_reg; + + return 0; +} + +static struct rockchip_pin_bank rv1108_pin_banks[] = { + PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU, + IOMUX_SOURCE_PMU), + PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", 0, 0, 0, 0), + PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, 0, 0, 0), + PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", 0, 0, 0, 0), +}; + +static struct rockchip_pin_ctrl rv1108_pin_ctrl = { + .pin_banks = rv1108_pin_banks, + .nr_banks = ARRAY_SIZE(rv1108_pin_banks), + .label = "RV1108-GPIO", + .type = RV1108, + .grf_mux_offset = 0x10, + .pmu_mux_offset = 0x0, + .iomux_recalced = rv1108_mux_recalced_data, + .niomux_recalced = ARRAY_SIZE(rv1108_mux_recalced_data), + .pull_calc_reg = rv1108_calc_pull_reg_and_bit, + .drv_calc_reg = rv1108_calc_drv_reg_and_bit, + .schmitt_calc_reg = rv1108_calc_schmitt_reg_and_bit, +}; + +static const struct udevice_id rv1108_pinctrl_ids[] = { + { + .compatible = "rockchip,rv1108-pinctrl", + .data = (ulong)&rv1108_pin_ctrl + }, + { } +}; + +U_BOOT_DRIVER(pinctrl_rv1108) = { + .name = "pinctrl_rv1108", + .id = UCLASS_PINCTRL, + .of_match = rv1108_pinctrl_ids, + .priv_auto_alloc_size = sizeof(struct rockchip_pinctrl_priv), + .ops = &rockchip_pinctrl_ops, +#if !CONFIG_IS_ENABLED(OF_PLATDATA) + .bind = dm_scan_fdt_dev, +#endif + .probe = rockchip_pinctrl_probe, +};