From: Stefan Roese <sr@denx.de>
Date: Wed, 3 Apr 2019 13:24:19 +0000 (+0200)
Subject: serial: atmel_usart: Use fixed clock value in SPL version with DM_SERIAL
X-Git-Tag: v2019.07-rc1~36^2~15
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=e567dfb213f8e7af953645630e96450e128a986b;p=oweals%2Fu-boot.git

serial: atmel_usart: Use fixed clock value in SPL version with DM_SERIAL

This patch adds an alterative SPL version of atmel_serial_enable_clk().
This enables the usage of this driver without full clock support (in
drivers and DT nodes). This saves some space in the SPL image.

Please note that this fixed clock support is only added to the SPL code
in the DM_SERIAL part of this file. All boards not using SPL & DM_SERIAL
should not be affected.

This patch also introduces CONFIG_SPL_UART_CLOCK for the fixed UART
input clock. It defaults to 132096000 for ARCH_AT91 but can be set to
a different value if needed.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Andreas Bießmann <andreas@biessmann.org>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
---

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 887cd687c0..fcbb0a81ed 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -508,6 +508,15 @@ config ATMEL_USART
 	  configured in the device tree, and input clock frequency can
 	  be got from the clk node.
 
+config SPL_UART_CLOCK
+	int "SPL fixed UART input clock"
+	depends on ATMEL_USART && SPL && !SPL_CLK
+	default 132096000 if ARCH_AT91
+	help
+	  Provide a fixed clock value as input to the UART controller. This
+	  might be needed on platforms which can't enable CONFIG_SPL_CLK
+	  because of SPL image size restrictions.
+
 config BCM283X_MU_SERIAL
 	bool "Support for BCM283x Mini-UART"
 	depends on DM_SERIAL && ARCH_BCM283X
diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c
index aa8cdff840..c450a4e08a 100644
--- a/drivers/serial/atmel_usart.c
+++ b/drivers/serial/atmel_usart.c
@@ -218,6 +218,17 @@ static const struct dm_serial_ops atmel_serial_ops = {
 	.setbrg = atmel_serial_setbrg,
 };
 
+#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_CLK)
+static int atmel_serial_enable_clk(struct udevice *dev)
+{
+	struct atmel_serial_priv *priv = dev_get_priv(dev);
+
+	/* Use fixed clock value in SPL */
+	priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK;
+
+	return 0;
+}
+#else
 static int atmel_serial_enable_clk(struct udevice *dev)
 {
 	struct atmel_serial_priv *priv = dev_get_priv(dev);
@@ -245,6 +256,7 @@ static int atmel_serial_enable_clk(struct udevice *dev)
 
 	return 0;
 }
+#endif
 
 static int atmel_serial_probe(struct udevice *dev)
 {