From: Nobuhiro Iwamatsu Date: Thu, 31 Mar 2016 18:51:36 +0000 (+0900) Subject: ARM: rmobile: Add support salvator-x board X-Git-Tag: v2016.09-rc2~2^2~9 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=e525d34b476e2eef06376633c12a94a56d7d889b;p=oweals%2Fu-boot.git ARM: rmobile: Add support salvator-x board Salvator-x is an entry level development board based on R-Car H3 SoC (R8A7795). This commit supports SCIF only. Signed-off-by: Hiroyuki Yokoyama Signed-off-by: Nobuhiro Iwamatsu --- diff --git a/arch/arm/mach-rmobile/Kconfig.64 b/arch/arm/mach-rmobile/Kconfig.64 index af1a76a42e..2a7eeba828 100644 --- a/arch/arm/mach-rmobile/Kconfig.64 +++ b/arch/arm/mach-rmobile/Kconfig.64 @@ -1,12 +1,28 @@ if RCAR_GEN3 +config R8A7795 + bool + choice prompt "Renesus ARM64 SoCs board select" optional +config TARGET_SALVATOR_X + bool "Salvator-X board" + select R8A7795 + help + Support for Renesas R-Car Gen3 R8a7795 platform + endchoice config SYS_SOC default "rmobile" +config RCAR_GEN3_EXTRAM_BOOT + bool "Enable boot from RAM" + depends on TARGET_SALVATOR_X + default n + +source "board/renesas/salvator-x/Kconfig" + endif diff --git a/board/renesas/salvator-x/Kconfig b/board/renesas/salvator-x/Kconfig new file mode 100644 index 0000000000..ed4c479f7c --- /dev/null +++ b/board/renesas/salvator-x/Kconfig @@ -0,0 +1,15 @@ +if TARGET_SALVATOR_X + +config SYS_SOC + default "rmobile" + +config SYS_BOARD + default "salvator-x" + +config SYS_VENDOR + default "renesas" + +config SYS_CONFIG_NAME + default "salvator-x" + +endif diff --git a/board/renesas/salvator-x/MAINTAINERS b/board/renesas/salvator-x/MAINTAINERS new file mode 100644 index 0000000000..abd05c88e0 --- /dev/null +++ b/board/renesas/salvator-x/MAINTAINERS @@ -0,0 +1,6 @@ +SALVATOR_X BOARD +M: Nobuhiro Iwamatsu +S: Maintained +F: board/renesas/salvator-x/ +F: include/configs/salvator-x.h +F: configs/salvator-x_defconfig diff --git a/board/renesas/salvator-x/Makefile b/board/renesas/salvator-x/Makefile new file mode 100644 index 0000000000..61b0d063e5 --- /dev/null +++ b/board/renesas/salvator-x/Makefile @@ -0,0 +1,9 @@ +# +# board/renesas/salvator-x/Makefile +# +# Copyright (C) 2015 Renesas Electronics Corporation +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := salvator-x.o ../rcar-common/common.o diff --git a/board/renesas/salvator-x/salvator-x.c b/board/renesas/salvator-x/salvator-x.c new file mode 100644 index 0000000000..47242c60dd --- /dev/null +++ b/board/renesas/salvator-x/salvator-x.c @@ -0,0 +1,120 @@ +/* + * board/renesas/salvator-x/salvator-x.c + * This file is Salvator-X board support. + * + * Copyright (C) 2015 Renesas Electronics Corporation + * Copyright (C) 2015 Nobuhiro Iwamatsu + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define CPGWPCR 0xE6150904 +#define CPGWPR 0xE615090C + +#define CLK2MHZ(clk) (clk / 1000 / 1000) +void s_init(void) +{ + struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE; + struct rcar_swdt *swdt = (struct rcar_swdt *)SWDT_BASE; + + /* Watchdog init */ + writel(0xA5A5A500, &rwdt->rwtcsra); + writel(0xA5A5A500, &swdt->swtcsra); + + writel(0xA5A50000, CPGWPCR); + writel(0xFFFFFFFF, CPGWPR); +} + +#define GSX_MSTP112 (1 << 12) /* 3DG */ +#define TMU0_MSTP125 (1 << 25) /* secure */ +#define TMU1_MSTP124 (1 << 24) /* non-secure */ +#define SCIF2_MSTP310 (1 << 10) /* SCIF2 */ + +int board_early_init_f(void) +{ + /* TMU0,1 */ /* which use ? */ + mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125 | TMU1_MSTP124); + /* SCIF2 */ + mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SCIF2_MSTP310); + + return 0; +} + +/* SYSC */ +/* R/- 32 Power status register 2(3DG) */ +#define SYSC_PWRSR2 0xE6180100 +/* -/W 32 Power resume control register 2 (3DG) */ +#define SYSC_PWRONCR2 0xE618010C + +DECLARE_GLOBAL_DATA_PTR; +int board_init(void) +{ + /* adress of boot parameters */ + gd->bd->bi_boot_params = CONFIG_SYS_TEXT_BASE + 0x50000; + + /* Init PFC controller */ + r8a7795_pinmux_init(); + + /* GSX: force power and clock supply */ + writel(0x0000001F, SYSC_PWRONCR2); + while (readl(SYSC_PWRSR2) != 0x000003E0) + mdelay(20); + + mstp_clrbits_le32(MSTPSR1, SMSTPCR1, GSX_MSTP112); + + return 0; +} + +int dram_init(void) +{ + gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + + return 0; +} + +const struct rmobile_sysinfo sysinfo = { + CONFIG_RCAR_BOARD_STRING +}; + +#define RST_BASE 0xE6160000 +#define RST_CA57RESCNT (RST_BASE + 0x40) +#define RST_CA53RESCNT (RST_BASE + 0x44) +#define RST_RSTOUTCR (RST_BASE + 0x58) +#define RST_CODE 0xA5A5000F + +void reset_cpu(ulong addr) +{ + /* only CA57 ? */ + writel(RST_CODE, RST_CA57RESCNT); +} + +static const struct sh_serial_platdata serial_platdata = { + .base = SCIF2_BASE, + .type = PORT_SCIF, + .clk = 14745600, /* 0xE10000 */ + .clk_mode = EXT_CLK, +}; + +U_BOOT_DEVICE(salvator_x_scif2) = { + .name = "serial_sh", + .platdata = &serial_platdata, +}; diff --git a/configs/salvator-x_defconfig b/configs/salvator-x_defconfig new file mode 100644 index 0000000000..1cfdbd684f --- /dev/null +++ b/configs/salvator-x_defconfig @@ -0,0 +1,4 @@ +CONFIG_ARM=y +CONFIG_RCAR_GEN3=y +CONFIG_TARGET_SALVATOR_X=y +CONFIG_SPL=y diff --git a/include/configs/rcar-gen3-common.h b/include/configs/rcar-gen3-common.h new file mode 100644 index 0000000000..617a2cfaca --- /dev/null +++ b/include/configs/rcar-gen3-common.h @@ -0,0 +1,105 @@ +/* + * include/configs/rcar-gen3-common.h + * This file is R-Car Gen3 common configuration file. + * + * Copyright (C) 2015 Renesas Electronics Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __RCAR_GEN3_COMMON_H +#define __RCAR_GEN3_COMMON_H + +#include + +#define CONFIG_CMD_BOOTI +#define CONFIG_CMD_EDITENV +#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_DFL +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_RUN +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE + +#define CONFIG_REMAKE_ELF + +/* boot option */ +#define CONFIG_SUPPORT_RAW_INITRD + +/* Support File sytems */ +#define CONFIG_FAT_WRITE +#define CONFIG_DOS_PARTITION +#define CONFIG_SUPPORT_VFAT +#define CONFIG_FS_EXT4 +#define CONFIG_EXT4_WRITE + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_CMDLINE_EDITING +#define CONFIG_OF_LIBFDT + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_VERSION_VARIABLE +#undef CONFIG_SHOW_BOOT_PROGRESS + +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_BOARD_EARLY_INIT_F + +#define CONFIG_SH_GPIO_PFC + +/* console */ +#undef CONFIG_SYS_CONSOLE_INFO_QUIET +#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE +#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE + +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_PBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE 512 +#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400 } + +/* MEMORY */ +#define CONFIG_SYS_TEXT_BASE 0x49000000 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0x7fff0) + +#define CONFIG_SYS_SDRAM_BASE (0x48000000) +#define CONFIG_SYS_SDRAM_SIZE (1024u * 1024 * 1024 - 0x08000000) +#define CONFIG_SYS_LOAD_ADDR (0x48080000) +#define CONFIG_NR_DRAM_BANKS 1 + +#define CONFIG_SYS_MONITOR_BASE 0x00000000 +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) +#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024) +#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) + +/* ENV setting */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_ENV_SECT_SIZE (128 * 1024) +#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_high=0xffffffffffffffff\0" \ + "initrd_high=0xffffffffffffffff\0" + +#define CONFIG_BOOTARGS \ + "console=ttySC0,115200 rw root=/dev/nfs " \ + "nfsroot=192.168.0.1:/export/rfs ip=192.168.0.20" + +#define CONFIG_BOOTCOMMAND \ + "tftp 0x48080000 Image; " \ + "tftp 0x48000000 Image-r8a7795-salvator-x.dtb; " \ + "booti 0x48080000 - 0x48000000" + +#endif /* __RCAR_GEN3_COMMON_H */ diff --git a/include/configs/salvator-x.h b/include/configs/salvator-x.h new file mode 100644 index 0000000000..d1d615c8a7 --- /dev/null +++ b/include/configs/salvator-x.h @@ -0,0 +1,54 @@ +/* + * include/configs/salvator-x.h + * This file is Salvator-X board configuration. + * + * Copyright (C) 2015 Renesas Electronics Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __SALVATOR_X_H +#define __SALVATOR_X_H + +#undef DEBUG + +#define CONFIG_RCAR_BOARD_STRING "Salvator-X" + +#include "rcar-gen3-common.h" + +/* SCIF */ +#define CONFIG_SCIF_CONSOLE +#define CONFIG_CONS_SCIF2 +#define CONFIG_CONS_INDEX 2 +#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ + +/* [A] Hyper Flash */ +/* use to RPC(SPI Multi I/O Bus Controller) */ +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_NOWHERE + +/* Board Clock */ +/* XTAL_CLK : 33.33MHz */ +#define RCAR_XTAL_CLK 33333333u +#define CONFIG_SYS_CLK_FREQ RCAR_XTAL_CLK +/* ch0to2 CPclk, ch3to11 S3D2_PEREclk, ch12to14 S3D2_RTclk */ +/* CPclk 16.66MHz, S3D2 133.33MHz */ +#define CONFIG_CP_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) +#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 192 / 2) +#define CONFIG_S3D2_CLK_FREQ (266666666u/2) + +/* Generic Timer Definitions (use in assembler source) */ +#define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */ + +/* Generic Interrupt Controller Definitions */ +#define CONFIG_GICV2 +#define GICD_BASE 0xF1010000 +#define GICC_BASE 0xF1020000 + +/* Module stop status bits */ +/* MFIS, SCIF1 */ +#define CONFIG_SMSTP2_ENA 0x00002040 +/* INTC-AP, IRQC */ +#define CONFIG_SMSTP4_ENA 0x00000180 + +#endif /* __SALVATOR_X_H */