From: Jagannadha Sutradharudu Teki Date: Wed, 8 Jan 2014 20:18:18 +0000 (+0530) Subject: zynq: Add zynq_zc770 xm010 board support X-Git-Tag: v2014.01-rc3~9^2~13 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=e1d3425b0b4a6119f4eeeaee2802d3081418b7ff;p=oweals%2Fu-boot.git zynq: Add zynq_zc770 xm010 board support ZC770 is a complete development board based on the Xilinx Zynq-7000 All Programmable SoC, similar to ZC70x board but which has four different daughter cards, like XM010, XM011, XM012 and XM013 ZC770 XM010: - 1Gb DDR3 - 1Mb SST SPI flash - 128 Mb Quad-SPI Flash - 8 Mb SST SI flash - Full size SD/MMC card cage - 10/100/1000 Ethernet - USB-UART Signed-off-by: Jagannadha Sutradharudu Teki --- diff --git a/boards.cfg b/boards.cfg index 682af42bdb..02e144faa5 100644 --- a/boards.cfg +++ b/boards.cfg @@ -360,6 +360,7 @@ Active arm armv7 vf610 freescale vf610twr Active arm armv7 zynq xilinx zynq zynq_zc70x - Michal Simek :Jagannadha Sutradharudu Teki Active arm armv7 zynq xilinx zynq zynq_zed - Michal Simek :Jagannadha Sutradharudu Teki Active arm armv7 zynq xilinx zynq zynq_microzed - Michal Simek :Jagannadha Sutradharudu Teki +Active arm armv7 zynq xilinx zynq zynq_zc770_xm010 zynq_zc770:ZC770_XM010 Michal Simek :Jagannadha Sutradharudu Teki Active arm armv7:arm720t tegra114 nvidia dalmore dalmore - Tom Warren Active arm armv7:arm720t tegra20 avionic-design medcom-wide medcom-wide - Alban Bedel Active arm armv7:arm720t tegra20 avionic-design plutux plutux - Alban Bedel diff --git a/include/configs/zynq_zc770.h b/include/configs/zynq_zc770.h new file mode 100644 index 0000000000..8589d9d5e8 --- /dev/null +++ b/include/configs/zynq_zc770.h @@ -0,0 +1,30 @@ +/* + * (C) Copyright 2013 Xilinx, Inc. + * + * Configuration settings for the Xilinx Zynq ZC770 board. + * See zynq-common.h for Zynq common configs + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_ZYNQ_ZC770_H +#define __CONFIG_ZYNQ_ZC770_H + +#define CONFIG_SYS_SDRAM_SIZE (1024 * 1024 * 1024) + +#define CONFIG_SYS_NO_FLASH + +#if defined(CONFIG_ZC770_XM010) +# define CONFIG_ZYNQ_SERIAL_UART1 +# define CONFIG_ZYNQ_GEM0 +# define CONFIG_ZYNQ_GEM_PHY_ADDR0 7 +# define CONFIG_ZYNQ_SDHCI0 +# define CONFIG_ZYNQ_SPI + +#else +# define CONFIG_ZYNQ_SERIAL_UART0 +#endif + +#include + +#endif /* __CONFIG_ZYNQ_ZC770_H */