From: Simon Glass Date: Sat, 7 Feb 2015 17:47:28 +0000 (-0700) Subject: arm: Allow lr to be saved by board code X-Git-Tag: v2015.04-rc2~3^2~3 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=e11c6c279d823dc0d2f470c5c2e3c0a9854a640f;p=oweals%2Fu-boot.git arm: Allow lr to be saved by board code The link register value can be required on some boards (e.g. FEL mode on sunxi) so use a branch instruction to jump to save_boot_params() instead of a branch link. This requires a branch back to save_boot_params_ret so adjust the users to deal with this. For exynos just drop the function since it doesn't do anything. Signed-off-by: Simon Glass Acked-by: Siarhei Siamashka Acked-by: Hans de Goede Signed-off-by: Hans de Goede --- diff --git a/arch/arm/cpu/armv7/exynos/spl_boot.c b/arch/arm/cpu/armv7/exynos/spl_boot.c index bc237c969f..c7f943eb6a 100644 --- a/arch/arm/cpu/armv7/exynos/spl_boot.c +++ b/arch/arm/cpu/armv7/exynos/spl_boot.c @@ -309,4 +309,3 @@ void board_init_r(gd_t *id, ulong dest_addr) while (1) ; } -void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) {} diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S index 86c0e42174..e19c7aecec 100644 --- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S @@ -19,7 +19,7 @@ ENTRY(save_boot_params) ldr r1, =OMAP_SRAM_SCRATCH_BOOT_PARAMS str r0, [r1] - bx lr + b save_boot_params_ret ENDPROC(save_boot_params) ENTRY(set_pl310_ctrl_reg) diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S index 78577b1d1c..80cb2639f6 100644 --- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S @@ -23,7 +23,7 @@ ENTRY(save_boot_params) ldr r5, [r0, #0x4] and r5, r5, #0xff str r5, [r4] - bx lr + b save_boot_params_ret ENDPROC(save_boot_params) #endif diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 70048c10ae..9b49ece2d6 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -31,9 +31,12 @@ *************************************************************************/ .globl reset + .globl save_boot_params_ret reset: - bl save_boot_params + /* Allow the board to save important registers */ + b save_boot_params +save_boot_params_ret: /* * disable interrupts (FIQ and IRQ), also set the cpu to SVC32 mode, * except if in HYP mode already @@ -96,7 +99,7 @@ ENDPROC(c_runtime_cpu_setup) * *************************************************************************/ ENTRY(save_boot_params) - bx lr @ back to my caller + b save_boot_params_ret @ back to my caller ENDPROC(save_boot_params) .weak save_boot_params diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 89f2294689..7820486df0 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -142,6 +142,21 @@ void flush_l3_cache(void); #ifndef __ASSEMBLY__ +/** + * save_boot_params() - Save boot parameters before starting reset sequence + * + * If you provide this function it will be called immediately U-Boot starts, + * both for SPL and U-Boot proper. + * + * All registers are unchanged from U-Boot entry. No registers need be + * preserved. + * + * This is not a normal C function. There is no stack. Return by branching to + * save_boot_params_ret. + * + * void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3); + */ + #define isb() __asm__ __volatile__ ("" : : : "memory") #define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t"); diff --git a/board/nokia/rx51/lowlevel_init.S b/board/nokia/rx51/lowlevel_init.S index e25290966c..9d4ea1b3f9 100644 --- a/board/nokia/rx51/lowlevel_init.S +++ b/board/nokia/rx51/lowlevel_init.S @@ -37,7 +37,8 @@ ih_magic: /* IH_MAGIC in big endian from include/image.h */ .global save_boot_params save_boot_params: - + /* Get return address */ + ldr lr, =save_boot_params_ret /* Copy valid attached kernel to address KERNEL_ADDRESS */