From: Albert ARIBAUD Date: Tue, 8 Jan 2013 10:18:02 +0000 (+0000) Subject: arm: move C runtime setup code in crt0.S X-Git-Tag: v2013.01-rc3~7^2~1 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=e05e5de7fae5bec79617e113916dac6631251156;p=oweals%2Fu-boot.git arm: move C runtime setup code in crt0.S Move all the C runtime setup code from every start.S in arch/arm into arch/arm/lib/crt0.S. This covers the code sequence from setting up the initial stack to calling into board_init_r(). Also, rewrite the C runtime setup and make functions board_init_*() and relocate_code() behave according to normal C semantics (no jumping across the C stack any more, etc). Some SPL targets had to be touched because they use start.S explicitly or for some reason; the relevant maintainers and custodians are cc:ed. Signed-off-by: Albert ARIBAUD --- diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index 5d3b4c2299..a067b8a186 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -165,13 +165,7 @@ next: bl cpu_init_crit #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -188,14 +182,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -245,7 +235,15 @@ fixnext: add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 blo fixloop - b clear_bss + bx lr + +#endif + +relocate_done: + + bx lr + +#ifndef CONFIG_SPL_BUILD _rel_dyn_start_ofs: .word __rel_dyn_start - _start @@ -253,54 +251,13 @@ _rel_dyn_end_ofs: .word __rel_dyn_end - _start _dynsym_start_ofs: .word __dynsym_start - _start -#endif -clear_bss: -#ifdef CONFIG_SPL_BUILD - /* No relocation for SPL */ - ldr r0, =__bss_start - ldr r1, =__bss_end__ -#else - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 #endif - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ -#ifdef CONFIG_NAND_SPL - ldr r0, _nand_boot_ofs - mov pc, r0 + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: -_nand_boot_ofs: - .word nand_boot -#else -jump_2_ram: - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ - mov pc, lr - -_board_init_r_ofs: - .word board_init_r - _start -#endif + bx lr /* ************************************************************************* diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index 667a0e0c48..40df4b1614 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -224,12 +224,7 @@ skip_tcmdisable: */ bl lowlevel_init /* go setup pll,mux,memory */ -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -246,14 +241,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -343,49 +334,9 @@ mmu_enable: skip_hw_init: #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: -#ifndef CONFIG_NAND_SPL - bl coloured_LED_init - bl red_led_on -#endif -#endif +relocate_done: -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ -#ifdef CONFIG_NAND_SPL - ldr pc, _nand_boot - -_nand_boot: .word nand_boot -#else - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ - mov pc, lr - -_board_init_r_ofs: - .word board_init_r - _start -#endif + bx lr _rel_dyn_start_ofs: .word __rel_dyn_start - _start @@ -399,6 +350,11 @@ _mmu_table_base: .word mmu_table #endif + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + mov pc, lr + #ifndef CONFIG_NAND_SPL /* * we assume that cache operation is done before. (eg. cleanup_before_linux()) diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index c2a7763fff..771d3869c1 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -147,12 +147,7 @@ reset: bl cpu_init_crit #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -169,14 +164,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -228,43 +219,10 @@ fixnext: blo fixloop #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: - - bl coloured_LED_init - bl red_led_on -#endif +relocate_done: -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ mov pc, lr -_board_init_r_ofs: - .word board_init_r - _start - _rel_dyn_start_ofs: .word __rel_dyn_start - _start _rel_dyn_end_ofs: @@ -272,6 +230,11 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + mov pc, lr + /* ************************************************************************* * diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S index 14c9156c08..511d21d334 100644 --- a/arch/arm/cpu/arm920t/start.S +++ b/arch/arm/cpu/arm920t/start.S @@ -182,12 +182,7 @@ copyex: bl cpu_init_crit #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -204,14 +199,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -263,51 +254,10 @@ fixnext: blo fixloop #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: - - bl coloured_LED_init - bl red_led_on -#endif - -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ -#ifdef CONFIG_NAND_SPL - ldr r0, _nand_boot_ofs - mov pc, r0 +relocate_done: -_nand_boot_ofs: - .word nand_boot -#else - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ mov pc, lr -_board_init_r_ofs: - .word board_init_r - _start -#endif - _rel_dyn_start_ofs: .word __rel_dyn_start - _start _rel_dyn_end_ofs: @@ -315,6 +265,11 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + mov pc, lr + /* ************************************************************************* * diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S index 3a483f6cae..82f5b8b590 100644 --- a/arch/arm/cpu/arm925t/start.S +++ b/arch/arm/cpu/arm925t/start.S @@ -176,12 +176,7 @@ poll1: bl cpu_init_crit #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -198,14 +193,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -257,51 +248,10 @@ fixnext: blo fixloop #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: - - bl coloured_LED_init - bl red_led_on -#endif - -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ -#ifdef CONFIG_NAND_SPL - ldr r0, _nand_boot_ofs - mov pc, r0 +relocate_done: -_nand_boot_ofs: - .word nand_boot -#else - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ mov pc, lr -_board_init_r_ofs: - .word board_init_r - _start -#endif - _rel_dyn_start_ofs: .word __rel_dyn_start - _start _rel_dyn_end_ofs: @@ -309,6 +259,11 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + mov pc, lr + /* ************************************************************************* * diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index 2188f7e35d..3cdecd9cdd 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -198,20 +198,7 @@ reset: bl cpu_init_crit #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: -#ifdef CONFIG_NAND_SPL /* deprecated, use instead CONFIG_SPL_BUILD */ - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) -#else -#ifdef CONFIG_SPL_BUILD - ldr sp, =(CONFIG_SPL_STACK) -#else - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) -#endif -#endif - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -229,15 +216,11 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start sub r9, r6, r0 /* r9 <- relocation offset */ cmp r0, r6 - moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + moveq r9, #0 /* no relocation. offset(r9) = 0 */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -289,56 +272,9 @@ fixnext: blo fixloop #endif -clear_bss: -#ifdef CONFIG_SPL_BUILD - /* No relocation for SPL */ - ldr r0, =__bss_start - ldr r1, =__bss_end__ -#else - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 -#endif - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: +relocate_done: -#ifndef CONFIG_SPL_BUILD - bl coloured_LED_init - bl red_led_on -#endif - -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ -#ifdef CONFIG_NAND_SPL - ldr r0, _nand_boot_ofs - mov pc, r0 - -_nand_boot_ofs: - .word nand_boot -#else - ldr r0, _board_init_r_ofs - ldr r1, _TEXT_BASE - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ - mov pc, lr - -_board_init_r_ofs: - .word board_init_r - _start -#endif + bx lr _rel_dyn_start_ofs: .word __rel_dyn_start - _start @@ -346,8 +282,14 @@ _rel_dyn_end_ofs: .word __rel_dyn_end - _start _dynsym_start_ofs: .word __dynsym_start - _start + #endif + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + bx lr + /* ************************************************************************* * diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S index 30e21835cc..a7a98a4e58 100644 --- a/arch/arm/cpu/arm946es/start.S +++ b/arch/arm/cpu/arm946es/start.S @@ -147,12 +147,7 @@ reset: bl cpu_init_crit #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -169,14 +164,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -228,46 +219,10 @@ fixnext: blo fixloop #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: -#endif - -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ -#ifdef CONFIG_NAND_SPL - ldr pc, _nand_boot +relocate_done: -_nand_boot: .word nand_boot -#else - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ mov pc, lr -_board_init_r_ofs: - .word board_init_r - _start -#endif - _rel_dyn_start_ofs: .word __rel_dyn_start - _start _rel_dyn_end_ofs: @@ -275,6 +230,11 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + mov pc, lr + /* ************************************************************************* * diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S index a133d19bc8..c189849fa8 100644 --- a/arch/arm/cpu/arm_intcm/start.S +++ b/arch/arm/cpu/arm_intcm/start.S @@ -143,12 +143,7 @@ reset: bl cpu_init_crit #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -165,14 +160,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -224,50 +215,9 @@ fixnext: blo fixloop #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: - - bl coloured_LED_init - bl red_led_on -#endif +relocate_done: -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ -#ifdef CONFIG_NAND_SPL - ldr r0, _nand_boot_ofs - mov pc, r0 - -_nand_boot_ofs: - .word nand_boot -#else - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ - mov pc, lr - -_board_init_r_ofs: - .word board_init_r - _start -#endif + bx lr _rel_dyn_start_ofs: .word __rel_dyn_start - _start @@ -276,6 +226,11 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + mov pc, lr + /* ************************************************************************* * diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 7df97c5a3a..dcc1f831bc 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -155,12 +155,7 @@ reset: bl cpu_init_crit #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -177,14 +172,10 @@ ENTRY(relocate_code) mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -233,34 +224,22 @@ fixnext: add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 blo fixloop - b clear_bss + +relocate_done: + + bx lr + _rel_dyn_start_ofs: .word __rel_dyn_start - _start _rel_dyn_end_ofs: .word __rel_dyn_end - _start _dynsym_start_ofs: .word __dynsym_start - _start +ENDPROC(relocate_code) -clear_bss: - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: +#endif -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ -jump_2_ram: +ENTRY(c_runtime_cpu_setup) /* * If I-cache is enabled invalidate it */ @@ -279,20 +258,9 @@ jump_2_ram: mcr p15, 0, r0, c12, c0, 0 @Set VBAR #endif /* !Tegra20 */ - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ - mov pc, lr - -_board_init_r_ofs: - .word board_init_r - _start -ENDPROC(relocate_code) -#endif + bx lr + +ENDPROC(c_runtime_cpu_setup) /************************************************************************* * diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S index c12f1a7db8..efb5a400cf 100644 --- a/arch/arm/cpu/ixp/start.S +++ b/arch/arm/cpu/ixp/start.S @@ -245,12 +245,7 @@ reset: orr r0,r0,#0x13 msr cpsr,r0 -/* Set initial stackpointer in SDRAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -267,14 +262,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -326,42 +317,9 @@ fixnext: blo fixloop #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: - - bl coloured_LED_init - bl red_led_on -#endif +relocate_done: -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ - mov pc, lr - -_board_init_r_ofs: - .word board_init_r - _start + bx lr _rel_dyn_start_ofs: .word __rel_dyn_start - _start @@ -370,6 +328,11 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + bx lr + /****************************************************************************/ /* */ /* Interrupt handling */ diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index 536cf5c974..72af869704 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -164,12 +164,7 @@ reset: bl lock_cache_for_stack #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0, =0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ #ifndef CONFIG_SPL_BUILD @@ -186,10 +181,6 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - /* Disable the Dcache RAM lock for stack now */ #ifdef CONFIG_CPU_PXA25X bl cpu_init_crit @@ -198,7 +189,7 @@ stack_setup: adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -250,48 +241,9 @@ fixnext: blo fixloop #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: -#endif /* #ifndef CONFIG_SPL_BUILD */ +relocate_done: -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ -#ifdef CONFIG_ONENAND_SPL - ldr r0, _onenand_boot_ofs - mov pc, r0 - -_onenand_boot_ofs: - .word onenand_boot -#else -jump_2_ram: - ldr r0, _board_init_r_ofs - ldr r1, _TEXT_BASE - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ - mov pc, lr - -_board_init_r_ofs: - .word board_init_r - _start -#endif + bx lr _rel_dyn_start_ofs: .word __rel_dyn_start - _start @@ -299,7 +251,14 @@ _rel_dyn_end_ofs: .word __rel_dyn_end - _start _dynsym_start_ofs: .word __dynsym_start - _start + #endif + + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + bx lr + /* ************************************************************************* * diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S index 323b923f13..4528c91983 100644 --- a/arch/arm/cpu/s3c44b0/start.S +++ b/arch/arm/cpu/s3c44b0/start.S @@ -128,12 +128,7 @@ reset: bl lowlevel_init #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -150,14 +145,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -209,42 +200,9 @@ fixnext: blo fixloop #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: - - bl coloured_LED_init - bl red_led_on -#endif +relocate_done: -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ - mov pc, lr - -_board_init_r_ofs: - .word board_init_r - _start + bx lr _rel_dyn_start_ofs: .word __rel_dyn_start - _start @@ -253,6 +211,11 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + bx lr + /* ************************************************************************* * diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S index 1ea92d1456..3144299afe 100644 --- a/arch/arm/cpu/sa1100/start.S +++ b/arch/arm/cpu/sa1100/start.S @@ -132,12 +132,7 @@ reset: bl cpu_init_crit #endif -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f + bl _main /*------------------------------------------------------------------------------*/ @@ -154,14 +149,10 @@ relocate_code: mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - /* Set up the stack */ -stack_setup: - mov sp, r4 - adr r0, _start cmp r0, r6 moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ + beq relocate_done /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ @@ -213,40 +204,10 @@ fixnext: blo fixloop #endif -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: -#endif +relocate_done: -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ mov pc, lr -_board_init_r_ofs: - .word board_init_r - _start - _rel_dyn_start_ofs: .word __rel_dyn_start - _start _rel_dyn_end_ofs: @@ -254,6 +215,11 @@ _rel_dyn_end_ofs: _dynsym_start_ofs: .word __dynsym_start - _start + .globl c_runtime_cpu_setup +c_runtime_cpu_setup: + + mov pc, lr + /* ************************************************************************* * diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 3422ac1c5f..07baee2ec6 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -36,6 +36,8 @@ GLSOBJS += _umodsi3.o GLCOBJS += div0.o +SOBJS-y += crt0.o + ifndef CONFIG_SPL_BUILD COBJS-y += board.o COBJS-y += bootm.o diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index e0cb6353a3..0459d0ce9f 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -279,11 +279,6 @@ void board_init_f(ulong bootflag) bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_F, "board_init_f"); - /* Pointer is writable since we allocated a register for it */ - gd = (gd_t *) ((CONFIG_SYS_INIT_SP_ADDR) & ~0x07); - /* compiler optimization barrier needed for GCC >= 3.4 */ - __asm__ __volatile__("": : :"memory"); - memset((void *)gd, 0, sizeof(gd_t)); gd->mon_len = _bss_end_ofs; @@ -465,10 +460,6 @@ void board_init_f(ulong bootflag) gd->fdt_blob = new_fdt; } memcpy(id, (void *)gd, sizeof(gd_t)); - - relocate_code(addr_sp, id, addr); - - /* NOTREACHED - relocate_code() does not return */ } #if !defined(CONFIG_SYS_NO_FLASH) @@ -493,8 +484,6 @@ void board_init_r(gd_t *id, ulong dest_addr) ulong flash_size; #endif - gd = id; - gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_R, "board_init_r"); diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S new file mode 100644 index 0000000000..4f60958b1d --- /dev/null +++ b/arch/arm/lib/crt0.S @@ -0,0 +1,173 @@ +/* + * crt0 - C-runtime startup Code for ARM U-Boot + * + * Copyright (c) 2012 Albert ARIBAUD + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +/* + * This file handles the target-independent stages of the U-Boot + * start-up where a C runtime environment is needed. Its entry point + * is _main and is branched into from the target's start.S file. + * + * _main execution sequence is: + * + * 1. Set up initial environment for calling board_init_f(). + * This environment only provides a stack and a place to store + * the GD ('global data') structure, both located in some readily + * available RAM (SRAM, locked cache...). In this context, VARIABLE + * global data, initialized or not (BSS), are UNAVAILABLE; only + * CONSTANT initialized data are available. + * + * 2. Call board_init_f(). This function prepares the hardware for + * execution from system RAM (DRAM, DDR...) As system RAM may not + * be available yet, , board_init_f() must use the current GD to + * store any data which must be passed on to later stages. These + * data include the relocation destination, the future stack, and + * the future GD location. + * + * (the following applies only to non-SPL builds) + * + * 3. Set up intermediate environment where the stack and GD are the + * ones allocated by board_init_f() in system RAM, but BSS and + * initialized non-const data are still not available. + * + * 4. Call relocate_code(). This function relocates U-Boot from its + * current location into the relocation destination computed by + * board_init_f(). + * + * 5. Set up final environment for calling board_init_r(). This + * environment has BSS (initialized to 0), initialized non-const + * data (initialized to their intended value), and stack in system + * RAM. GD has retained values set by board_init_f(). Some CPUs + * have some work left to do at this point regarding memory, so + * call c_runtime_cpu_setup. + * + * 6. Branch to either nand_boot() or board_init_r(). + */ + +/* + * declare nand_boot() or board_init_r() to jump to at end of crt0 + */ + +#if defined(CONFIG_NAND_SPL) + +.globl nand_boot + +#elif ! defined(CONFIG_SPL_BUILD) + +.globl board_init_r + +#endif + +/* + * start and end of BSS + */ + +.globl __bss_start +.globl __bss_end__ + +/* + * entry point of crt0 sequence + */ + +.global _main + +_main: + +/* + * Set up initial C runtime environment and call board_init_f(0). + */ + +#if defined(CONFIG_NAND_SPL) + /* deprecated, use instead CONFIG_SPL_BUILD */ + ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) +#elif defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) + ldr sp, =(CONFIG_SPL_STACK) +#else + ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) +#endif + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ + sub sp, #GD_SIZE /* allocate one GD above SP */ + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ + mov r8, sp /* GD is above SP */ + mov r0, #0 + bl board_init_f + +#if ! defined(CONFIG_SPL_BUILD) + +/* + * Set up intermediate environment (new sp and gd) and call + * relocate_code(addr_sp, gd, addr_moni). Trick here is that + * we'll return 'here' but relocated. + */ + + ldr sp, [r8, #GD_START_ADDR_SP] /* r8 = gd->start_addr_sp */ + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ + ldr r8, [r8, #GD_BD] /* r8 = gd->bd */ + sub r8, r8, #GD_SIZE /* new GD is below bd */ + + adr lr, here + ldr r0, [r8, #GD_RELOC_OFF] /* lr = gd->start_addr_sp */ + add lr, lr, r0 + ldr r0, [r8, #GD_START_ADDR_SP] /* r0 = gd->start_addr_sp */ + mov r1, r8 /* r1 = gd */ + ldr r2, [r8, #GD_RELOCADDR] /* r2 = gd->relocaddr */ + b relocate_code +here: + +/* Set up final (full) environment */ + + bl c_runtime_cpu_setup /* we still call old routine here */ + + ldr r0, =__bss_start /* this is auto-relocated! */ + ldr r1, =__bss_end__ /* this is auto-relocated! */ + + mov r2, #0x00000000 /* prepare zero to clear BSS */ + +clbss_l:cmp r0, r1 /* while not at end of BSS */ + strlo r2, [r0] /* clear 32-bit BSS word */ + addlo r0, r0, #4 /* move to next */ + blo clbss_l + + bl coloured_LED_init + bl red_led_on + +#if defined(CONFIG_NAND_SPL) + + /* call _nand_boot() */ + ldr pc, =nand_boot + +#else + + /* call board_init_r(gd_t *id, ulong dest_addr) */ + mov r0, r8 /* gd_t */ + ldr r1, [r8, #GD_RELOCADDR] /* dest_addr */ + /* call board_init_r */ + ldr pc, =board_init_r /* this is auto-relocated! */ + +#endif + + /* we should not return here. */ + +#endif diff --git a/include/common.h b/include/common.h index d0bf1e8ab2..2f2578bef5 100644 --- a/include/common.h +++ b/include/common.h @@ -300,7 +300,7 @@ int abortboot(int bootdelay); extern char console_buffer[]; /* arch/$(ARCH)/lib/board.c */ -void board_init_f (ulong) __attribute__ ((noreturn)); +void board_init_f(ulong); void board_init_r (gd_t *, ulong) __attribute__ ((noreturn)); int checkboard (void); int checkflash (void); diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h index 42077bd6fd..5633d2a429 100644 --- a/include/configs/socfpga_cyclone5.h +++ b/include/configs/socfpga_cyclone5.h @@ -65,7 +65,7 @@ #define CONFIG_SYS_BOOTMAPSZ ((256*1024*1024) - (4*1024)) #define CONFIG_SPL_RAM_DEVICE -#define CONFIG_SPL_STACK (&__stack_start) +#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR #define CONFIG_SYS_SPL_MALLOC_START ((unsigned long) (&__malloc_start)) #define CONFIG_SYS_SPL_MALLOC_SIZE (&__malloc_end - &__malloc_start) diff --git a/lib/asm-offsets.c b/lib/asm-offsets.c index c88f5d4451..8546a52f45 100644 --- a/lib/asm-offsets.c +++ b/lib/asm-offsets.c @@ -28,5 +28,19 @@ int main(void) DEFINE(GENERATED_BD_INFO_SIZE, (sizeof(struct bd_info) + 15) & ~15); + DEFINE(GD_SIZE, sizeof(struct global_data)); + + DEFINE(GD_BD, offsetof(struct global_data, bd)); + +#if defined(CONFIG_ARM) + + DEFINE(GD_RELOCADDR, offsetof(struct global_data, relocaddr)); + + DEFINE(GD_RELOC_OFF, offsetof(struct global_data, reloc_off)); + + DEFINE(GD_START_ADDR_SP, offsetof(struct global_data, start_addr_sp)); + +#endif + return 0; } diff --git a/nand_spl/board/freescale/mx31pdk/Makefile b/nand_spl/board/freescale/mx31pdk/Makefile index f67ed09d03..fd0dfc19d8 100644 --- a/nand_spl/board/freescale/mx31pdk/Makefile +++ b/nand_spl/board/freescale/mx31pdk/Makefile @@ -12,11 +12,12 @@ LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \ AFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL CFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL -SOBJS = start.o lowlevel_init.o +SOBJS = start.o crt0.o lowlevel_init.o COBJS = nand_boot_fsl_nfc.o SRCS := $(SRCTREE)/nand_spl/nand_boot_fsl_nfc.c SRCS += $(SRCTREE)/arch/arm/cpu/arm1136/start.S +SRCS += $(SRCTREE)/arch/arm/lib/crt0.S SRCS += $(SRCTREE)/board/freescale/mx31pdk/lowlevel_init.S OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) __OBJS := $(SOBJS) $(COBJS) @@ -50,6 +51,9 @@ $(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT) $(obj)%.o: $(SRCTREE)/arch/arm/cpu/arm1136/%.S $(CC) $(AFLAGS) -c -o $@ $< +$(obj)%.o: $(SRCTREE)/arch/arm/lib/%.S + $(CC) $(AFLAGS) -c -o $@ $< + $(obj)%.o: $(SRCTREE)/board/freescale/mx31pdk/%.S $(CC) $(AFLAGS) -c -o $@ $< diff --git a/nand_spl/board/karo/tx25/Makefile b/nand_spl/board/karo/tx25/Makefile index b27189d9b5..82489d2405 100644 --- a/nand_spl/board/karo/tx25/Makefile +++ b/nand_spl/board/karo/tx25/Makefile @@ -33,11 +33,12 @@ LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \ AFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL CFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL -SOBJS = start.o lowlevel_init.o +SOBJS = start.o crt0.o lowlevel_init.o COBJS = nand_boot_fsl_nfc.o SRCS := $(SRCTREE)/nand_spl/nand_boot_fsl_nfc.c SRCS += $(SRCTREE)/arch/arm/cpu/arm926ejs/start.S +SRCS += $(SRCTREE)/arch/arm/lib/crt0.S SRCS += $(SRCTREE)/board/karo/tx25/lowlevel_init.S OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) __OBJS := $(SOBJS) $(COBJS) @@ -71,6 +72,9 @@ $(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT) $(obj)%.o: $(SRCTREE)/arch/arm/cpu/arm926ejs/%.S $(CC) $(AFLAGS) -c -o $@ $< +$(obj)%.o: $(SRCTREE)/arch/arm/lib/%.S + $(CC) $(AFLAGS) -c -o $@ $< + $(obj)%.o: $(SRCTREE)/board/karo/tx25/%.S $(CC) $(AFLAGS) -c -o $@ $<