From: Josua Mayer Date: Wed, 21 Mar 2018 00:13:02 +0000 (+0100) Subject: u-boot-mvebu: update to 2018.03 X-Git-Tag: v18.06.0-rc1~518 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=dff904a955ee59b1495b82f765884f787d24d540;p=oweals%2Fopenwrt.git u-boot-mvebu: update to 2018.03 This release brings various improvements to clearfog support, such as distro-boot. Obsoletes: 0002-clearfog-reset-usom-onboard-1512-phy.patch 0003-clearfog-enable-distro-boot-code.patch Signed-off-by: Josua Mayer --- diff --git a/package/boot/uboot-mvebu/Makefile b/package/boot/uboot-mvebu/Makefile index cb48b67406..3005e45c46 100644 --- a/package/boot/uboot-mvebu/Makefile +++ b/package/boot/uboot-mvebu/Makefile @@ -8,10 +8,10 @@ include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/kernel.mk -PKG_VERSION:=2017.03 +PKG_VERSION:=2018.03 PKG_RELEASE:=1 -PKG_HASH:=f54baf3f9325bf444c7905f3a5b6f83680edb1e6e1a4d5f8a5ad80abe885113f +PKG_HASH:=7e7477534409d5368eb1371ffde6820f0f79780a1a1f676161c48442cb303dfd include $(INCLUDE_DIR)/u-boot.mk include $(INCLUDE_DIR)/package.mk diff --git a/package/boot/uboot-mvebu/patches/0002-clearfog-reset-usom-onboard-1512-phy.patch b/package/boot/uboot-mvebu/patches/0002-clearfog-reset-usom-onboard-1512-phy.patch deleted file mode 100644 index 164c6f3f25..0000000000 --- a/package/boot/uboot-mvebu/patches/0002-clearfog-reset-usom-onboard-1512-phy.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 98848106b9558244ae36a85229caabcdb57d0f7b Mon Sep 17 00:00:00 2001 -From: Jonas Gorski -Date: Fri, 23 Sep 2016 13:58:14 +0200 -Subject: [PATCH 2/4] clearfog: reset usom onboard 1512 phy - -Use GPIO19 which is wired to the uSOM phy reset signal in order to reset -the uSOM's 88E81512 gigabit Ethernet phy. - -This GPIO is valid on ClearFog rev 2.1 and newer. - -Signed-off-by: Rabeeh Khoury -[jonas.gorski: adapted to upstream u-boot code] -Signed-off-by: Jonas Gorski ---- - board/solidrun/clearfog/clearfog.c | 4 ++++ - 1 file changed, 4 insertions(+) - -diff --git a/board/solidrun/clearfog/clearfog.c b/board/solidrun/clearfog/clearfog.c -index 2773f5957e..3a8257cac3 100644 ---- a/board/solidrun/clearfog/clearfog.c -+++ b/board/solidrun/clearfog/clearfog.c -@@ -131,8 +131,12 @@ int board_init(void) - /* Toggle GPIO41 to reset onboard switch and phy */ - clrbits_le32(MVEBU_GPIO1_BASE + 0x0, BIT(9)); - clrbits_le32(MVEBU_GPIO1_BASE + 0x4, BIT(9)); -+ /* GPIO 19 on ClearFog rev 2.1 controls the uSOM onboard phy reset */ -+ clrbits_le32(MVEBU_GPIO0_BASE + 0x0, BIT(19)); -+ clrbits_le32(MVEBU_GPIO0_BASE + 0x4, BIT(19)); - mdelay(1); - setbits_le32(MVEBU_GPIO1_BASE + 0x0, BIT(9)); -+ setbits_le32(MVEBU_GPIO0_BASE + 0x0, BIT(19)); - mdelay(10); - - /* Init I2C IO expanders */ --- -2.12.2 - diff --git a/package/boot/uboot-mvebu/patches/0003-clearfog-enable-distro-boot-code.patch b/package/boot/uboot-mvebu/patches/0003-clearfog-enable-distro-boot-code.patch deleted file mode 100644 index 97b2d1f250..0000000000 --- a/package/boot/uboot-mvebu/patches/0003-clearfog-enable-distro-boot-code.patch +++ /dev/null @@ -1,97 +0,0 @@ -From 9653921eadd5d5268afbee6c928708158fc4e844 Mon Sep 17 00:00:00 2001 -From: Josua Mayer -Date: Tue, 22 Nov 2016 16:33:23 +0100 -Subject: [PATCH 3/4] clearfog: enable distro boot code - -load addresses start at 0x02000000, leaving enough space for fdt, -boot scripts and ramdisk at the end. -Only boot from mmc, the other options are not in working order. -Removed *_high variables in good faith. They can be re-added with sane -values when, and if required. - -Signed-off-by: Josua Mayer ---- - Kconfig | 1 + - include/configs/clearfog.h | 47 +++++++++++++++++++++++++++++++++++++++++----- - 2 files changed, 43 insertions(+), 5 deletions(-) - -diff --git a/Kconfig b/Kconfig -index 81b4226463..f7aec2255b 100644 ---- a/Kconfig -+++ b/Kconfig -@@ -59,6 +59,7 @@ config DISTRO_DEFAULTS - default y if ARCH_LS2080A - default y if ARCH_MESON - default y if ARCH_ROCKCHIP -+ default y if TARGET_CLEARFOG - default n - select CMD_BOOTZ if ARM && !ARM64 - select CMD_BOOTI if ARM64 -diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h -index 0c51d2a288..890dd84b5d 100644 ---- a/include/configs/clearfog.h -+++ b/include/configs/clearfog.h -@@ -79,11 +79,6 @@ - - #define CONFIG_SYS_ALT_MEMTEST - --/* Keep device tree and initrd in lower memory so the kernel can access them */ --#define CONFIG_EXTRA_ENV_SETTINGS \ -- "fdt_high=0x10000000\0" \ -- "initrd_high=0x10000000\0" -- - /* SPL */ - /* - * Select the boot device here -@@ -128,6 +123,48 @@ - #endif - #endif - -+#ifndef CONFIG_SPL_BUILD -+/* -+ * Add standard bootenv from distro boot code: -+ * Keep device tree and initrd in lower memory so the kernel can access them -+ * Set default load addresses: -+ * - 63MiB space for kernel -+ * - 1MiB space for fdt -+ * - 1MiB space for extlinux file, or boot script -+ * - remainder for ramdisk -+ * Keep device tree and initrd in lower memory so the kernel can access them -+ * Set name of fdt file (default to Clearfog Pro) -+ * specify console device -+ */ -+#define CONFIG_EXTRA_ENV_SETTINGS \ -+ "kernel_addr_r=0x02000000\0" \ -+ "fdt_addr_r=0x05f00000\0" \ -+ "pxefile_addr_r=0x06000000\0" \ -+ "scriptaddr=0x06000000\0" \ -+ "ramdisk_addr_r=0x06100000\0" \ -+ "fdt_high=0x10000000\0" \ -+ "initrd_high=0x10000000\0" \ -+ "fdtfile=armada-388-clearfog-pro.dtb\0" \ -+ "console=ttyS0," __stringify(CONFIG_BAUDRATE) "\0" \ -+ BOOTENV -+ -+/* include distro boot code defaults */ -+#include -+ -+/* -+ * specify boot order -+ * sdcard or emmc -> usb -> network -+ */ -+#define BOOT_TARGET_DEVICES(func) \ -+ func(MMC, mmc, 0) \ -+ func(USB, usb, 0) \ -+ func(PXE, pxe, na) \ -+ func(DHCP, dhcp, na) -+ -+/* include the actual distro boot code */ -+#include -+#endif -+ - /* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros --- -2.12.2 -