From: Marek Vasut Date: Wed, 25 Mar 2020 18:08:59 +0000 (+0100) Subject: net: ks8851: Add Kconfig entries X-Git-Tag: v2020.07-rc3~4^2 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=df4c4834fc008315bce2f978220ecc9da2e3862c;p=oweals%2Fu-boot.git net: ks8851: Add Kconfig entries Convert CONFIG_KS8851_MLL and CONFIG_KS8851_MLL_BASEADDR to Kconfig Signed-off-by: Marek Vasut Cc: Eugen Hristev Cc: Joe Hershberger --- diff --git a/configs/at91sam9n12ek_mmc_defconfig b/configs/at91sam9n12ek_mmc_defconfig index 075daa79d3..308f097b60 100644 --- a/configs/at91sam9n12ek_mmc_defconfig +++ b/configs/at91sam9n12ek_mmc_defconfig @@ -47,6 +47,8 @@ CONFIG_NAND_ATMEL=y CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=30000000 CONFIG_SPI_FLASH_ATMEL=y +CONFIG_KS8851_MLL=y +CONFIG_KS8851_MLL_BASEADDR=0x30000000 CONFIG_PINCTRL=y CONFIG_PINCTRL_AT91=y CONFIG_DM_SERIAL=y diff --git a/configs/at91sam9n12ek_nandflash_defconfig b/configs/at91sam9n12ek_nandflash_defconfig index b02be84493..fd6d13db9b 100644 --- a/configs/at91sam9n12ek_nandflash_defconfig +++ b/configs/at91sam9n12ek_nandflash_defconfig @@ -48,6 +48,8 @@ CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=30000000 CONFIG_SPI_FLASH_ATMEL=y +CONFIG_KS8851_MLL=y +CONFIG_KS8851_MLL_BASEADDR=0x30000000 CONFIG_PINCTRL=y CONFIG_PINCTRL_AT91=y CONFIG_DM_SERIAL=y diff --git a/configs/at91sam9n12ek_spiflash_defconfig b/configs/at91sam9n12ek_spiflash_defconfig index be8ef51a2d..97e29bdc6e 100644 --- a/configs/at91sam9n12ek_spiflash_defconfig +++ b/configs/at91sam9n12ek_spiflash_defconfig @@ -49,6 +49,8 @@ CONFIG_NAND_ATMEL=y CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=30000000 CONFIG_SPI_FLASH_ATMEL=y +CONFIG_KS8851_MLL=y +CONFIG_KS8851_MLL_BASEADDR=0x30000000 CONFIG_PINCTRL=y CONFIG_PINCTRL_AT91=y CONFIG_DM_SERIAL=y diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index f7855c92d3..0b08de0ef4 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -307,6 +307,20 @@ config FSLDMAFEC This driver supports the network interface units in the ColdFire family. +config KS8851_MLL + bool "Microchip KS8851-MLL controller driver" + help + The Microchip KS8851 parallel bus external ethernet interface chip. + +if KS8851_MLL +if !DM_ETH +config KS8851_MLL_BASEADDR + hex "Microchip KS8851-MLL Base Address" + help + Define this to hold the physical address of the device (I/O space) +endif #DM_ETH +endif #KS8851_MLL + config MVGBE bool "Marvell Orion5x/Kirkwood network interface support" depends on ARCH_KIRKWOOD || ARCH_ORION5X diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index 7ee569521e..706217fef9 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -63,9 +63,6 @@ "bootargs_mmc=root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait\0" /* Ethernet */ -#define CONFIG_KS8851_MLL -#define CONFIG_KS8851_MLL_BASEADDR 0x30000000 /* use NCS2 */ - #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ /* USB host */ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 3f5e6504e1..9b6b45116a 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -942,8 +942,6 @@ CONFIG_KONA CONFIG_KONA_GPIO CONFIG_KONA_RESET_S CONFIG_KPROBES -CONFIG_KS8851_MLL -CONFIG_KS8851_MLL_BASEADDR CONFIG_KSNAV_NETCP_PDMA_CTRL_BASE CONFIG_KSNAV_NETCP_PDMA_RX_BASE CONFIG_KSNAV_NETCP_PDMA_RX_CH_NUM