From: Wang Huan Date: Fri, 5 Sep 2014 05:52:35 +0000 (+0800) Subject: ls102xa: i2c: Add i2c support for LS102xA X-Git-Tag: v2014.10-rc3~119^2~15 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=df0a5b880d6e53b62ea05b483243dd8675cf4648;p=oweals%2Fu-boot.git ls102xa: i2c: Add i2c support for LS102xA The existing i.MX's I2C driver mxc_i2c.c is compatible with the controller of LS102xA. As I2C's registers are 8-bit on LS102xA, I2C_QUIRK_REG is enabled to use 8-bit driver. This patch is to add I2C 1,2,3 support for LS102xA. Signed-off-by: Alison Wang --- diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c index c14797ce0e..021b2fe511 100644 --- a/drivers/i2c/mxc_i2c.c +++ b/drivers/i2c/mxc_i2c.c @@ -423,7 +423,7 @@ static void * const i2c_bases[] = { (void *)IMX_I2C2_BASE #elif defined(CONFIG_MX31) || defined(CONFIG_MX35) || \ defined(CONFIG_MX51) || defined(CONFIG_MX53) || \ - defined(CONFIG_MX6) + defined(CONFIG_MX6) || defined(CONFIG_LS102XA) (void *)I2C1_BASE_ADDR, (void *)I2C2_BASE_ADDR, (void *)I2C3_BASE_ADDR @@ -545,7 +545,7 @@ U_BOOT_I2C_ADAP_COMPLETE(mxc1, mxc_i2c_init, mxc_i2c_probe, CONFIG_SYS_MXC_I2C2_SLAVE, 1) #if defined(CONFIG_MX31) || defined(CONFIG_MX35) ||\ defined(CONFIG_MX51) || defined(CONFIG_MX53) ||\ - defined(CONFIG_MX6) + defined(CONFIG_MX6) || defined(CONFIG_LS102XA) U_BOOT_I2C_ADAP_COMPLETE(mxc2, mxc_i2c_init, mxc_i2c_probe, mxc_i2c_read, mxc_i2c_write, mxc_i2c_set_bus_speed,