From: Jernej Skrabec Date: Sat, 29 Apr 2017 12:43:35 +0000 (+0200) Subject: edid: Set timings flags according to edid X-Git-Tag: v2017.07-rc1~257^2~6 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=dc8cae4df3c016cbcb6eb8a841a7a94ff36b9e0b;p=oweals%2Fu-boot.git edid: Set timings flags according to edid Timing flags are never set, so they may contain garbage. Since some drivers check them, video output may be broken on those drivers. Initialize them to 0 and check for few common flags. Signed-off-by: Jernej Skrabec Reviewed-by: Simon Glass --- diff --git a/common/edid.c b/common/edid.c index e08e420920..ab7069fdcd 100644 --- a/common/edid.c +++ b/common/edid.c @@ -85,6 +85,7 @@ static void decode_timing(u8 *buf, struct display_timing *timing) uint x_mm, y_mm; unsigned int ha, hbl, hso, hspw, hborder; unsigned int va, vbl, vso, vspw, vborder; + struct edid_detailed_timing *t = (struct edid_detailed_timing *)buf; /* Edid contains pixel clock in terms of 10KHz */ set_entry(&timing->pixelclock, (buf[0] + (buf[1] << 8)) * 10000); @@ -111,6 +112,19 @@ static void decode_timing(u8 *buf, struct display_timing *timing) set_entry(&timing->vback_porch, vbl - vso - vspw); set_entry(&timing->vsync_len, vspw); + timing->flags = 0; + if (EDID_DETAILED_TIMING_FLAG_HSYNC_POLARITY(*t)) + timing->flags |= DISPLAY_FLAGS_HSYNC_HIGH; + else + timing->flags |= DISPLAY_FLAGS_HSYNC_LOW; + if (EDID_DETAILED_TIMING_FLAG_VSYNC_POLARITY(*t)) + timing->flags |= DISPLAY_FLAGS_VSYNC_HIGH; + else + timing->flags |= DISPLAY_FLAGS_VSYNC_LOW; + + if (EDID_DETAILED_TIMING_FLAG_INTERLACED(*t)) + timing->flags = DISPLAY_FLAGS_INTERLACED; + debug("Detailed mode clock %u Hz, %d mm x %d mm\n" " %04x %04x %04x %04x hborder %x\n" " %04x %04x %04x %04x vborder %x\n",