From: Wolfgang Grandegger Date: Thu, 5 Jun 2008 11:12:05 +0000 (+0200) Subject: TQM85xx: Support for Intel 82527 compatible CAN controller X-Git-Tag: v1.3.4-rc1~110^2~18 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=d9ee843d54c54776e1fdb86336ce554906a87331;p=oweals%2Fu-boot.git TQM85xx: Support for Intel 82527 compatible CAN controller This patch adds initialization of the UPMC RAM to support up to two Intel 82527 compatible CAN controller on the TQM85xx modules. Signed-off-by: Thomas Waehner Signed-off-by: Wolfgang Grandegger --- diff --git a/board/tqc/tqm85xx/law.c b/board/tqc/tqm85xx/law.c index d9377005e2..ad35464e47 100644 --- a/board/tqc/tqm85xx/law.c +++ b/board/tqc/tqm85xx/law.c @@ -35,6 +35,7 @@ * 0xc000_0000 0xdfff_ffff RapidIO 512M * 0xe000_0000 0xe000_ffff CCSR 1M * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M + * 0xe300_0000 0xe3ff_ffff CAN 16M * 0xf800_0000 0xf80f_ffff BCSR 1M * 0xfe00_0000 0xffff_ffff FLASH (boot bank) 32M * @@ -49,6 +50,9 @@ struct law_entry law_table[] = { SET_LAW_ENTRY (3, CFG_LBC_FLASH_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC), SET_LAW_ENTRY (4, CFG_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI), SET_LAW_ENTRY (5, CFG_RIO_MEM_BASE, LAWAR_SIZE_512M, LAW_TRGT_IF_RIO), +#ifdef CONFIG_CAN_DRIVER + SET_LAW_ENTRY (6, CFG_CAN_BASE, LAWAR_SIZE_16M, LAW_TRGT_IF_LBC), +#endif /* CONFIG_CAN_DRIVER */ }; int num_law_entries = ARRAY_SIZE (law_table); diff --git a/board/tqc/tqm85xx/tlb.c b/board/tqc/tqm85xx/tlb.c index 3e29062362..dc362012d8 100644 --- a/board/tqc/tqm85xx/tlb.c +++ b/board/tqc/tqm85xx/tlb.c @@ -95,6 +95,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * TLB 6: 64M Non-cacheable, guarded * 0xe0000000 1M CCSRBAR * 0xe2000000 16M PCI1 IO + * 0xe3000000 16M CAN */ SET_TLB_ENTRY (1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS, MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c index a45df2b734..4fb9c113b2 100644 --- a/board/tqc/tqm85xx/tqm85xx.c +++ b/board/tqc/tqm85xx/tqm85xx.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include @@ -333,6 +334,27 @@ int misc_init_r (void) return 0; } +#ifdef CONFIG_CAN_DRIVER +/* + * Initialize UPMC RAM + */ +static void upmc_write (u_char addr, uint val) +{ + volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR); + + out_be32 (&lbc->mdr, val); + + clrsetbits_be32(&lbc->mcmr, MxMR_MAD_MSK, + MxMR_OP_WARR | (addr & MxMR_MAD_MSK)); + + /* dummy access to perform write */ + out_8 ((void __iomem *)CFG_CAN_BASE, 0); + + /* normal operation */ + clrbits_be32(&lbc->mcmr, MxMR_OP_WARR); +} +#endif /* CONFIG_CAN_DRIVER */ + /* * Initialize Local Bus */ @@ -389,6 +411,41 @@ void local_bus_init (void) gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000); asm ("sync;isync;msync"); } + +#ifdef CONFIG_CAN_DRIVER + /* + * According to timing specifications EAD must be + * set if Local Bus Clock is > 83 MHz. + */ + if (lbc_hz > 83) + out_be32 (&lbc->or2, CFG_OR2_CAN | OR_UPM_EAD); + else + out_be32 (&lbc->or2, CFG_OR2_CAN); + out_be32 (&lbc->br2, CFG_BR2_CAN); + + /* LGPL4 is UPWAIT */ + out_be32(&lbc->mcmr, MxMR_DSx_3_CYCL | MxMR_GPL_x4DIS | MxMR_WLFx_3X); + + /* Initialize UPMC for CAN: single read */ + upmc_write (0x00, 0xFFFFED00); + upmc_write (0x01, 0xCCFFCC00); + upmc_write (0x02, 0x00FFCF00); + upmc_write (0x03, 0x00FFCF00); + upmc_write (0x04, 0x00FFDC00); + upmc_write (0x05, 0x00FFCF00); + upmc_write (0x06, 0x00FFED00); + upmc_write (0x07, 0x3FFFCC07); + + /* Initialize UPMC for CAN: single write */ + upmc_write (0x18, 0xFFFFED00); + upmc_write (0x19, 0xCCFFEC00); + upmc_write (0x1A, 0x00FFED80); + upmc_write (0x1B, 0x00FFED80); + upmc_write (0x1C, 0x00FFFC00); + upmc_write (0x1D, 0x0FFFEC00); + upmc_write (0x1E, 0x0FFFEF00); + upmc_write (0x1F, 0x3FFFEC05); +#endif /* CONFIG_CAN_DRIVER */ } #if defined(CONFIG_PCI) diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index 432c155a85..17df118561 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -52,6 +52,8 @@ #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ +#undef CONFIG_CAN_DRIVER /* CAN Driver support */ + /* * sysclk for MPC85xx * @@ -199,6 +201,15 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif +/* CAN */ +#ifdef CONFIG_CAN_DRIVER +#define CFG_CAN_BASE 0xE3000000 /* CAN base address */ +#define CFG_CAN_OR_AM 0xFFFF8000 /* 32 KiB address mask */ +#define CFG_OR2_CAN (CFG_CAN_OR_AM | OR_UPM_BI) +#define CFG_BR2_CAN ((CFG_CAN_BASE & BR_BA) | \ + BR_PS_8 | BR_MS_UPMC | BR_V) +#endif /* CONFIG_CAN_DRIVER */ + /* * I2C */