From: Ram Chandra Jangir Date: Fri, 4 May 2018 16:27:33 +0000 (+0530) Subject: ipq806x: add kernel 4.14 support X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=d805812e75d014a4ff6e1a832e286bdf0f7ebe3e;p=librecmc%2Flibrecmc.git ipq806x: add kernel 4.14 support - Rebased the patches for 4.14 - Dropped spi-qup and 0027, 0028, 0029 clk patches since it's already included in upstream. Tested on IPQ AP148 Board: 1) NOR boot and NAND boot 2) Tested USB and PCIe interfaces 3) WDOG test 4) cpu frequency scaling 5) ethernet, 2G and 5G WiFi 6) ubi sysupgrade Signed-off-by: Ram Chandra Jangir Tested-by: Stefan Lippers-Hollmann (cherry picked from commit 93dd2f7211db6607184adadb488582e01fd5c29b) --- diff --git a/target/linux/ipq806x/config-4.14 b/target/linux/ipq806x/config-4.14 new file mode 100644 index 0000000000..8970f199a3 --- /dev/null +++ b/target/linux/ipq806x/config-4.14 @@ -0,0 +1,502 @@ +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_AMBA_PL08X is not set +CONFIG_APQ_GCC_8084=y +CONFIG_APQ_MMCC_8084=y +CONFIG_AR8216_PHY=y +CONFIG_ARCH_CLOCKSOURCE_DATA=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y +CONFIG_ARCH_HAS_SG_CHAIN=y +CONFIG_ARCH_HAS_TICK_BROADCAST=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +# CONFIG_ARCH_MDM9615 is not set +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MSM8960=y +CONFIG_ARCH_MSM8974=y +CONFIG_ARCH_MSM8X60=y +CONFIG_ARCH_MULTIPLATFORM=y +# CONFIG_ARCH_MULTI_CPU_AUTO is not set +CONFIG_ARCH_MULTI_V6_V7=y +CONFIG_ARCH_MULTI_V7=y +CONFIG_ARCH_NR_GPIO=0 +CONFIG_ARCH_QCOM=y +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_ARM=y +CONFIG_ARM_AMBA=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ARCH_TIMER=y +CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set +# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set +CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y +CONFIG_ARM_CPUIDLE=y +CONFIG_ARM_CPU_SUSPEND=y +# CONFIG_ARM_CPU_TOPOLOGY is not set +CONFIG_ARM_GIC=y +CONFIG_ARM_HAS_SG_CHAIN=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_L1_CACHE_SHIFT_6=y +# CONFIG_ARM_LPAE is not set +CONFIG_ARM_PATCH_IDIV=y +CONFIG_ARM_PATCH_PHYS_VIRT=y +CONFIG_ARM_QCOM_CPUFREQ=y +CONFIG_ARM_QCOM_CPUIDLE=y +# CONFIG_ARM_SMMU is not set +# CONFIG_ARM_SP805_WATCHDOG is not set +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +CONFIG_ARM_UNWIND=y +CONFIG_ARM_VIRT_EXT=y +# CONFIG_BINFMT_FLAT is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_MQ_PCI=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_BOUNCE=y +CONFIG_BUS_TOPOLOGY_ADHOC=y +# CONFIG_CACHE_L2X0 is not set +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLKSRC_OF=y +CONFIG_CLKSRC_PROBE=y +CONFIG_CLKSRC_QCOM=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_COMMON_CLK=y +CONFIG_COMMON_CLK_QCOM=y +CONFIG_CPUFREQ_DT=y +CONFIG_CPUFREQ_DT_PLATDEV=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +# CONFIG_CPU_BIG_ENDIAN is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +CONFIG_CPU_FREQ_GOV_ATTR_SET=y +CONFIG_CPU_FREQ_GOV_COMMON=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_HAS_ASID=y +# CONFIG_CPU_ICACHE_DISABLE is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_PM=y +CONFIG_CPU_RMAP=y +CONFIG_CPU_THERMAL=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_V7=y +CONFIG_CRC16=y +# CONFIG_CRC32_SARWATE is not set +CONFIG_CRC32_SLICEBY8=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CTR=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_DEV_QCE=y +CONFIG_CRYPTO_DRBG=y +CONFIG_CRYPTO_DRBG_HMAC=y +CONFIG_CRYPTO_DRBG_MENU=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_GF128MUL=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_JITTERENTROPY=y +CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_NULL=y +CONFIG_CRYPTO_NULL2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_RNG_DEFAULT=y +CONFIG_CRYPTO_SEQIV=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_XTS=y +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_DEBUG_GPIO=y +CONFIG_DEBUG_LL=y +CONFIG_DEBUG_LL_INCLUDE="debug/msm.S" +CONFIG_DEBUG_QCOM_UARTDM=y +# CONFIG_DEBUG_UART_8250 is not set +CONFIG_DEBUG_UART_PHYS=0x16340000 +CONFIG_DEBUG_UART_VIRT=0xf6340000 +CONFIG_DEBUG_UNCOMPRESS=y +# CONFIG_DEBUG_USER is not set +CONFIG_DMADEVICES=y +CONFIG_DMA_ENGINE=y +CONFIG_DMA_OF=y +CONFIG_DMA_VIRTUAL_CHANNELS=y +CONFIG_DTC=y +CONFIG_DT_IDLE_STATES=y +# CONFIG_DWMAC_DWC_QOS_ETH is not set +# CONFIG_DWMAC_GENERIC is not set +CONFIG_DWMAC_IPQ806X=y +CONFIG_DYNAMIC_DEBUG=y +CONFIG_EARLY_PRINTK=y +CONFIG_EDAC_ATOMIC_SCRUB=y +CONFIG_EDAC_SUPPORT=y +CONFIG_ETHERNET_PACKET_MANGLE=y +CONFIG_FIXED_PHY=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_EARLY_IOREMAP=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_GENERIC_MSI_IRQ=y +CONFIG_GENERIC_MSI_IRQ_DOMAIN=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_PHY=y +CONFIG_GENERIC_PINCONF=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GPIOLIB=y +CONFIG_GPIOLIB_IRQCHIP=y +CONFIG_GPIO_SYSFS=y +CONFIG_HANDLE_DOMAIN_IRQ=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_HAVE_ARCH_BITREVERSE=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_ARM_ARCH_TIMER=y +CONFIG_HAVE_ARM_SMCCC=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_HAVE_CBPF_JIT=y +CONFIG_HAVE_CC_STACKPROTECTOR=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_OPTPROBES=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_SMP=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_UID16=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HIGHMEM=y +# CONFIG_HIGHPTE is not set +CONFIG_HWMON=y +CONFIG_HWSPINLOCK=y +CONFIG_HWSPINLOCK_QCOM=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_MSM=y +CONFIG_HZ_FIXED=0 +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_QUP=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IOMMU_HELPER=y +# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set +# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set +CONFIG_IOMMU_SUPPORT=y +# CONFIG_IPQ_GCC_4019 is not set +CONFIG_IPQ_GCC_806X=y +# CONFIG_IPQ_GCC_8074 is not set +# CONFIG_IPQ_LCC_806X is not set +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_HIERARCHY=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_WORK=y +CONFIG_KPSS_XCC=y +CONFIG_KRAITCC=y +CONFIG_KRAIT_CLOCKS=y +CONFIG_KRAIT_L2_ACCESSORS=y +CONFIG_LIBFDT=y +CONFIG_LOCKUP_DETECTOR=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_MDIO_BITBANG=y +CONFIG_MDIO_BOARDINFO=y +CONFIG_MDIO_GPIO=y +# CONFIG_MDM_GCC_9615 is not set +# CONFIG_MDM_LCC_9615 is not set +# CONFIG_MFD_MAX77620 is not set +CONFIG_MFD_QCOM_RPM=y +# CONFIG_MFD_SPMI_PMIC is not set +CONFIG_MFD_SYSCON=y +CONFIG_MIGHT_HAVE_CACHE_L2X0=y +CONFIG_MIGHT_HAVE_PCI=y +CONFIG_MMC=y +CONFIG_MMC_ARMMMCI=y +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_MINORS=16 +CONFIG_MMC_QCOM_DML=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_MSM=y +# CONFIG_MMC_SDHCI_PCI is not set +CONFIG_MMC_SDHCI_PLTFM=y +# CONFIG_MMC_TIFM_SD is not set +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_MSM_BUS_SCALING=y +CONFIG_MSM_GCC_8660=y +# CONFIG_MSM_GCC_8916 is not set +CONFIG_MSM_GCC_8960=y +CONFIG_MSM_GCC_8974=y +# CONFIG_MSM_GCC_8994 is not set +# CONFIG_MSM_GCC_8996 is not set +# CONFIG_MSM_IOMMU is not set +# CONFIG_MSM_LCC_8960 is not set +CONFIG_MSM_MMCC_8960=y +CONFIG_MSM_MMCC_8974=y +# CONFIG_MSM_MMCC_8996 is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_QCOM=y +# CONFIG_MTD_PHYSMAP_OF_VERSATILE is not set +CONFIG_MTD_QCOM_SMEM_PARTS=y +CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_SPLIT_FIRMWARE=y +CONFIG_MTD_SPLIT_FIT_FW=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_BEB_LIMIT=20 +CONFIG_MTD_UBI_BLOCK=y +# CONFIG_MTD_UBI_FASTMAP is not set +# CONFIG_MTD_UBI_GLUEBI is not set +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MULTI_IRQ_HANDLER=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEON=y +CONFIG_NET_DSA=y +CONFIG_NET_DSA_HWMON=y +CONFIG_NET_DSA_QCA8K=y +CONFIG_NET_DSA_TAG_QCA=y +CONFIG_NET_FLOW_LIMIT=y +CONFIG_NET_PTP_CLASSIFY=y +CONFIG_NET_SWITCHDEV=y +CONFIG_NLS=y +CONFIG_NO_BOOTMEM=y +CONFIG_NO_HZ=y +CONFIG_NO_HZ_COMMON=y +CONFIG_NO_HZ_IDLE=y +CONFIG_NR_CPUS=4 +CONFIG_NVMEM=y +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_ADDRESS_PCI=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_MDIO=y +CONFIG_OF_NET=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y +CONFIG_OF_RESERVED_MEM=y +CONFIG_OLD_SIGACTION=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_PADATA=y +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PCI=y +CONFIG_PCIEAER=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIE_DW=y +CONFIG_PCIE_QCOM=y +CONFIG_PCI_DEBUG=y +CONFIG_PCI_DISABLE_COMMON_QUIRKS=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_DOMAINS_GENERIC=y +CONFIG_PCI_MSI=y +CONFIG_PCI_MSI_IRQ_DOMAIN=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PGTABLE_LEVELS=2 +CONFIG_PHYLIB=y +# CONFIG_PHY_QCOM_APQ8064_SATA is not set +CONFIG_PHY_QCOM_IPQ806X_SATA=y +# CONFIG_PHY_QCOM_QMP is not set +# CONFIG_PHY_QCOM_QUSB2 is not set +# CONFIG_PHY_QCOM_UFS is not set +CONFIG_PINCTRL=y +CONFIG_PINCTRL_APQ8064=y +# CONFIG_PINCTRL_APQ8084 is not set +# CONFIG_PINCTRL_IPQ4019 is not set +CONFIG_PINCTRL_IPQ8064=y +# CONFIG_PINCTRL_IPQ8074 is not set +# CONFIG_PINCTRL_MDM9615 is not set +CONFIG_PINCTRL_MSM=y +# CONFIG_PINCTRL_MSM8660 is not set +# CONFIG_PINCTRL_MSM8916 is not set +# CONFIG_PINCTRL_MSM8960 is not set +# CONFIG_PINCTRL_MSM8994 is not set +# CONFIG_PINCTRL_MSM8996 is not set +CONFIG_PINCTRL_MSM8X74=y +# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set +# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set +# CONFIG_PL330_DMA is not set +CONFIG_PM_OPP=y +CONFIG_POWER_RESET=y +# CONFIG_POWER_RESET_BRCMKONA is not set +CONFIG_POWER_RESET_MSM=y +CONFIG_POWER_SUPPLY=y +CONFIG_PPS=y +CONFIG_PRINTK_TIME=y +CONFIG_PTP_1588_CLOCK=y +CONFIG_QCOM_ADM=y +CONFIG_QCOM_BAM_DMA=y +CONFIG_QCOM_CLK_RPM=y +# CONFIG_QCOM_EBI2 is not set +CONFIG_QCOM_GDSC=y +CONFIG_QCOM_GSBI=y +CONFIG_QCOM_HFPLL=y +# CONFIG_QCOM_IOMMU is not set +CONFIG_QCOM_PM=y +# CONFIG_QCOM_Q6V5_PIL is not set +CONFIG_QCOM_QFPROM=y +CONFIG_QCOM_RPMCC=y +CONFIG_QCOM_SCM=y +CONFIG_QCOM_SCM_32=y +# CONFIG_QCOM_SMD is not set +CONFIG_QCOM_SMEM=y +# CONFIG_QCOM_SMP2P is not set +# CONFIG_QCOM_SMSM is not set +CONFIG_QCOM_TCSR=y +CONFIG_QCOM_TSENS=y +# CONFIG_QCOM_WCNSS_PIL is not set +CONFIG_QCOM_WDT=y +# CONFIG_QRTR is not set +CONFIG_RAS=y +CONFIG_RATIONAL=y +CONFIG_RCU_CPU_STALL_TIMEOUT=21 +CONFIG_RCU_STALL_COMMON=y +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGMAP_SPI=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_QCOM_RPM=y +# CONFIG_REGULATOR_QCOM_SPMI is not set +CONFIG_RESET_CONTROLLER=y +CONFIG_RFS_ACCEL=y +# CONFIG_RPMSG_QCOM_SMD is not set +CONFIG_RPS=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_DRV_CMOS is not set +CONFIG_RTC_I2C_AND_SPI=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +# CONFIG_SCHED_INFO is not set +# CONFIG_SCSI_DMA is not set +CONFIG_SERIAL_8250_FSL=y +# CONFIG_SERIAL_AMBA_PL011 is not set +CONFIG_SERIAL_MSM=y +CONFIG_SERIAL_MSM_CONSOLE=y +CONFIG_SMP=y +CONFIG_SMP_ON_UP=y +CONFIG_SPARSE_IRQ=y +CONFIG_SPI=y +# CONFIG_SPI_CADENCE_QUADSPI is not set +CONFIG_SPI_MASTER=y +CONFIG_SPI_QUP=y +CONFIG_SPMI=y +CONFIG_SPMI_MSM_PMIC_ARB=y +CONFIG_SRCU=y +CONFIG_STMMAC_ETH=y +CONFIG_STMMAC_PLATFORM=y +CONFIG_SWCONFIG=y +CONFIG_SWCONFIG_LEDS=y +CONFIG_SWIOTLB=y +CONFIG_SWPHY=y +CONFIG_SWP_EMULATE=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_THERMAL=y +CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y +CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 +CONFIG_THERMAL_GOV_STEP_WISE=y +CONFIG_THERMAL_HWMON=y +CONFIG_THERMAL_OF=y +# CONFIG_THUMB2_KERNEL is not set +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TREE_RCU=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +CONFIG_UEVENT_HELPER_PATH="" +CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" +CONFIG_USB=y +CONFIG_USB_COMMON=y +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_QCOM_8X16_PHY is not set +CONFIG_USB_SUPPORT=y +# CONFIG_USB_UHCI_HCD is not set +CONFIG_USE_OF=y +CONFIG_VDSO=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_WATCHDOG_CORE=y +CONFIG_XPS=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_BCJ=y +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap148.dts new file mode 100644 index 0000000000..a3df82909e --- /dev/null +++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap148.dts @@ -0,0 +1,250 @@ +#include "qcom-ipq8064-v1.0.dtsi" + +/ { + model = "Qualcomm IPQ8064/AP148"; + compatible = "qcom,ipq8064-ap148", "qcom,ipq8064"; + + memory@0 { + reg = <0x42000000 0x1e000000>; + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; + + aliases { + serial0 = &gsbi4_serial; + mdio-gpio0 = &mdio0; + }; + + chosen { + linux,stdout-path = "serial0:115200n8"; + }; + + soc { + pinmux@800000 { + i2c4_pins: i2c4_pinmux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + bias-disable; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + drive-strength = <10>; + bias-none; + }; + }; + nand_pins: nand_pins { + mux { + pins = "gpio34", "gpio35", "gpio36", + "gpio37", "gpio38", "gpio39", + "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; + function = "nand"; + drive-strength = <10>; + bias-disable; + }; + pullups { + pins = "gpio39"; + bias-pull-up; + }; + hold { + pins = "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; + bias-bus-hold; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + rgmii2_pins: rgmii2_pins { + mux { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + }; + }; + + gsbi@16300000 { + qcom,mode = ; + status = "ok"; + serial@16340000 { + status = "ok"; + }; + + /* + * The i2c device on gsbi4 should not be enabled. + * On ipq806x designs gsbi4 i2c is meant for exclusive + * RPM usage. Turning this on in kernel manifests as + * i2c failure for the RPM. + */ + }; + + gsbi5: gsbi@1a200000 { + qcom,mode = ; + status = "ok"; + + spi4: spi@1a280000 { + status = "ok"; + spi-max-frequency = <50000000>; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 0>; + + flash: m25p80@0 { + compatible = "s25fl256s1"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + partitions { + compatible = "qcom,smem"; + }; + }; + }; + }; + + sata-phy@1b400000 { + status = "ok"; + }; + + sata@29000000 { + status = "ok"; + }; + + phy@100f8800 { /* USB3 port 1 HS phy */ + status = "ok"; + }; + + phy@100f8830 { /* USB3 port 1 SS phy */ + status = "ok"; + }; + + phy@110f8800 { /* USB3 port 0 HS phy */ + status = "ok"; + }; + + phy@110f8830 { /* USB3 port 0 SS phy */ + status = "ok"; + }; + + usb30@0 { + status = "ok"; + }; + + usb30@1 { + status = "ok"; + }; + + pcie0: pci@1b500000 { + status = "ok"; + }; + + pcie1: pci@1b700000 { + status = "ok"; + force_gen1 = <1>; + }; + + nand@1ac00000 { + status = "ok"; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + cs0 { + reg = <0>; + compatible = "qcom,nandcs"; + + nand-ecc-strength = <4>; + nand-bus-width = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "qcom,smem"; + }; + }; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x000e4 0x6a545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + >; + }; + + phy4: ethernet-phy@4 { + device_type = "ethernet-phy"; + reg = <4>; + }; + }; + + gmac1: ethernet@37200000 { + status = "ok"; + phy-mode = "rgmii"; + qcom,id = <1>; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + gmac2: ethernet@37400000 { + status = "ok"; + phy-mode = "sgmii"; + qcom,id = <2>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; + +&adm_dma { + status = "ok"; +}; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-c2600.dts new file mode 100644 index 0000000000..a4fd13429c --- /dev/null +++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-c2600.dts @@ -0,0 +1,500 @@ +#include "qcom-ipq8064-v1.0.dtsi" + +#include + +/ { + model = "TP-Link Archer C2600"; + compatible = "tplink,c2600", "qcom,ipq8064"; + + memory@0 { + reg = <0x42000000 0x1e000000>; + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; + + aliases { + serial0 = &gsbi4_serial; + mdio-gpio0 = &mdio0; + + led-boot = &power; + led-failsafe = &general; + led-running = &power; + led-upgrade = &general; + }; + + chosen { + linux,stdout-path = "serial0:115200n8"; + }; + + soc { + pinmux@800000 { + button_pins: button_pins { + mux { + pins = "gpio16", "gpio54", "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + i2c4_pins: i2c4_pinmux { + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <12>; + bias-disable; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33", + "gpio53", "gpio66"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + bias-pull-down; + }; + + data { + pins = "gpio18", "gpio19"; + drive-strength = <10>; + }; + + cs { + pins = "gpio20"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + }; + + clk { + pins = "gpio21"; + drive-strength = <12>; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + rgmii2_pins: rgmii2_pins { + mux { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + }; + + usb0_pwr_en_pin: usb0_pwr_en_pin { + mux { + pins = "gpio25"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + output-high; + }; + }; + + usb1_pwr_en_pin: usb1_pwr_en_pin { + mux { + pins = "gpio23"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + output-high; + }; + }; + }; + + gsbi@16300000 { + qcom,mode = ; + status = "ok"; + serial@16340000 { + status = "ok"; + }; + /* + * The i2c device on gsbi4 should not be enabled. + * On ipq806x designs gsbi4 i2c is meant for exclusive + * RPM usage. Turning this on in kernel manifests as + * i2c failure for the RPM. + */ + }; + + gsbi5: gsbi@1a200000 { + qcom,mode = ; + status = "ok"; + + spi5: spi@1a280000 { + status = "ok"; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; + + flash: m25p80@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + SBL1@0 { + label = "SBL1"; + reg = <0x0 0x20000>; + read-only; + }; + + MIBIB@20000 { + label = "MIBIB"; + reg = <0x20000 0x20000>; + read-only; + }; + + SBL2@40000 { + label = "SBL2"; + reg = <0x40000 0x20000>; + read-only; + }; + + SBL3@60000 { + label = "SBL3"; + reg = <0x60000 0x30000>; + read-only; + }; + + DDRCONFIG@90000 { + label = "DDRCONFIG"; + reg = <0x90000 0x10000>; + read-only; + }; + + SSD@a0000 { + label = "SSD"; + reg = <0xa0000 0x10000>; + read-only; + }; + + TZ@b0000 { + label = "TZ"; + reg = <0xb0000 0x30000>; + read-only; + }; + + RPM@e0000 { + label = "RPM"; + reg = <0xe0000 0x20000>; + read-only; + }; + + fs-uboot@100000 { + label = "fs-uboot"; + reg = <0x100000 0x70000>; + read-only; + }; + + uboot-env@170000 { + label = "uboot-env"; + reg = <0x170000 0x40000>; + read-only; + }; + + radio@1b0000 { + label = "radio"; + reg = <0x1b0000 0x40000>; + read-only; + }; + + os-image@1f0000 { + label = "os-image"; + reg = <0x1f0000 0x200000>; + }; + + rootfs@3f0000 { + label = "rootfs"; + reg = <0x3f0000 0x1b00000>; + }; + + defaultmac: default-mac@1ef0000 { + label = "default-mac"; + reg = <0x1ef0000 0x00200>; + read-only; + }; + + pin@1ef0200 { + label = "pin"; + reg = <0x1ef0200 0x00200>; + read-only; + }; + + product-info@1ef0400 { + label = "product-info"; + reg = <0x1ef0400 0x0fc00>; + read-only; + }; + + partition-table@1f00000 { + label = "partition-table"; + reg = <0x1f00000 0x10000>; + read-only; + }; + + soft-version@1f10000 { + label = "soft-version"; + reg = <0x1f10000 0x10000>; + read-only; + }; + + support-list@1f20000 { + label = "support-list"; + reg = <0x1f20000 0x10000>; + read-only; + }; + + profile@1f30000 { + label = "profile"; + reg = <0x1f30000 0x10000>; + read-only; + }; + + default-config@1f40000 { + label = "default-config"; + reg = <0x1f40000 0x10000>; + read-only; + }; + + user-config@1f50000 { + label = "user-config"; + reg = <0x1f50000 0x40000>; + read-only; + }; + + qos-db@1f90000 { + label = "qos-db"; + reg = <0x1f90000 0x40000>; + read-only; + }; + + usb-config@1fd0000 { + label = "usb-config"; + reg = <0x1fd0000 0x10000>; + read-only; + }; + + log@1fe0000 { + label = "log"; + reg = <0x1fe0000 0x20000>; + read-only; + }; + }; + }; + }; + + phy@100f8800 { /* USB3 port 1 HS phy */ + status = "ok"; + }; + + phy@100f8830 { /* USB3 port 1 SS phy */ + status = "ok"; + }; + + phy@110f8800 { /* USB3 port 0 HS phy */ + status = "ok"; + }; + + phy@110f8830 { /* USB3 port 0 SS phy */ + status = "ok"; + }; + + usb30@0 { + status = "ok"; + + pinctrl-0 = <&usb0_pwr_en_pin>; + pinctrl-names = "default"; + }; + + usb30@1 { + status = "ok"; + + pinctrl-0 = <&usb1_pwr_en_pin>; + pinctrl-names = "default"; + }; + + pcie0: pci@1b500000 { + status = "ok"; + }; + + pcie1: pci@1b700000 { + status = "ok"; + force_gen1 = <1>; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x000e4 0x6a545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + >; + }; + + phy4: ethernet-phy@4 { + device_type = "ethernet-phy"; + reg = <4>; + }; + }; + + gmac1: ethernet@37200000 { + status = "ok"; + phy-mode = "rgmii"; + qcom,id = <1>; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + + mtd-mac-address = <&defaultmac 0x8>; + mtd-mac-address-increment = <1>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + gmac2: ethernet@37400000 { + status = "ok"; + phy-mode = "sgmii"; + qcom,id = <2>; + + mtd-mac-address = <&defaultmac 0x8>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + rpm@108000 { + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + wifi { + label = "wifi"; + gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + ledswitch { + label = "ledswitch"; + gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + lan { + label = "c2600:white:lan"; + gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>; + }; + + usb4 { + label = "c2600:white:usb_4"; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; + }; + + usb2 { + label = "c2600:white:usb_2"; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; + }; + + wps { + label = "c2600:white:wps"; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; + }; + + wan_amber { + label = "c2600:amber:wan"; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; + }; + + wan_white { + label = "c2600:white:wan"; + gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>; + }; + + power: power { + label = "c2600:white:power"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + + general: general { + label = "c2600:white:general"; + gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&adm_dma { + status = "ok"; +}; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-d7800.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-d7800.dts new file mode 100644 index 0000000000..b7c49cc816 --- /dev/null +++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-d7800.dts @@ -0,0 +1,419 @@ +#include "qcom-ipq8064-v1.0.dtsi" + +#include + +/ { + model = "Netgear Nighthawk X4 D7800"; + compatible = "netgear,d7800", "qcom,ipq8064"; + + memory@0 { + reg = <0x42000000 0xe000000>; + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; + + aliases { + serial0 = &gsbi4_serial; + mdio-gpio0 = &mdio0; + + led-boot = &power_white; + led-failsafe = &power_amber; + led-running = &power_white; + led-upgrade = &power_amber; + }; + + chosen { + bootargs = "rootfstype=squashfs noinitrd"; + linux,stdout-path = "serial0:115200n8"; + }; + + soc { + pinmux@800000 { + button_pins: button_pins { + mux { + pins = "gpio6", "gpio54", "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + i2c4_pins: i2c4_pinmux { + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <12>; + bias-disable; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23", + "gpio24","gpio26", "gpio53", "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + nand_pins: nand_pins { + mux { + pins = "gpio34", "gpio35", "gpio36", + "gpio37", "gpio38", "gpio39", + "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; + function = "nand"; + drive-strength = <10>; + bias-disable; + }; + pullups { + pins = "gpio39"; + bias-pull-up; + }; + hold { + pins = "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; + bias-bus-hold; + }; + }; + + rgmii2_pins: rgmii2_pins { + mux { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + }; + + usb0_pwr_en_pins: usb0_pwr_en_pins { + mux { + pins = "gpio15"; + function = "gpio"; + drive-strength = <12>; + bias-pull-down; + output-high; + }; + }; + + usb1_pwr_en_pins: usb1_pwr_en_pins { + mux { + pins = "gpio16", "gpio68"; + function = "gpio"; + drive-strength = <12>; + bias-pull-down; + output-high; + }; + }; + }; + + gsbi@16300000 { + qcom,mode = ; + status = "ok"; + serial@16340000 { + status = "ok"; + }; + /* + * The i2c device on gsbi4 should not be enabled. + * On ipq806x designs gsbi4 i2c is meant for exclusive + * RPM usage. Turning this on in kernel manifests as + * i2c failure for the RPM. + */ + }; + + sata-phy@1b400000 { + status = "ok"; + }; + + sata@29000000 { + status = "ok"; + }; + + phy@100f8800 { /* USB3 port 1 HS phy */ + status = "ok"; + }; + + phy@100f8830 { /* USB3 port 1 SS phy */ + status = "ok"; + }; + + phy@110f8800 { /* USB3 port 0 HS phy */ + status = "ok"; + }; + + phy@110f8830 { /* USB3 port 0 SS phy */ + status = "ok"; + }; + + usb30@0 { + status = "ok"; + + pinctrl-0 = <&usb0_pwr_en_pins>; + pinctrl-names = "default"; + }; + + usb30@1 { + status = "ok"; + + pinctrl-0 = <&usb1_pwr_en_pins>; + pinctrl-names = "default"; + }; + + pcie0: pci@1b500000 { + status = "ok"; + reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pcie0_pins>; + pinctrl-names = "default"; + }; + + pcie1: pci@1b700000 { + status = "ok"; + reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&pcie1_pins>; + pinctrl-names = "default"; + force_gen1 = <1>; + }; + + nand@1ac00000 { + status = "ok"; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <1>; + + cs0 { + reg = <0>; + compatible = "qcom,nandcs"; + + nand-ecc-strength = <4>; + nand-bus-width = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + qcadata@0 { + label = "qcadata"; + reg = <0x0000000 0x0c80000>; + read-only; + }; + + APPSBL@c80000 { + label = "APPSBL"; + reg = <0x0c80000 0x0500000>; + read-only; + }; + + APPSBLENV@1180000 { + label = "APPSBLENV"; + reg = <0x1180000 0x0080000>; + read-only; + }; + + art: art@1200000 { + label = "art"; + reg = <0x1200000 0x0140000>; + read-only; + }; + + artbak: art@1340000 { + label = "artbak"; + reg = <0x1340000 0x0140000>; + read-only; + }; + + kernel@1480000 { + label = "kernel"; + reg = <0x1480000 0x0200000>; + }; + + ubi@1680000 { + label = "ubi"; + reg = <0x1680000 0x1E00000>; + }; + + netgear@3480000 { + label = "netgear"; + reg = <0x3480000 0x4480000>; + read-only; + }; + + reserve@7900000 { + label = "reserve"; + reg = <0x7900000 0x0700000>; + read-only; + }; + + firmware@1480000 { + label = "firmware"; + reg = <0x1480000 0x2000000>; + }; + }; + }; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x000e4 0x6a545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + >; + }; + + phy4: ethernet-phy@4 { + device_type = "ethernet-phy"; + reg = <4>; + }; + }; + + gmac1: ethernet@37200000 { + status = "ok"; + phy-mode = "rgmii"; + phy-handle = <&phy4>; + qcom,id = <1>; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + + mtd-mac-address = <&art 6>; + }; + + gmac2: ethernet@37400000 { + status = "ok"; + phy-mode = "sgmii"; + qcom,id = <2>; + + mtd-mac-address = <&art 0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + rpm@108000 { + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + wifi { + label = "wifi"; + gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + usb1 { + label = "d7800:white:usb1"; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; + }; + + usb2 { + label = "d7800:white:usb2"; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; + }; + + power_amber: power_amber { + label = "d7800:amber:power"; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; + }; + + wan_white { + label = "d7800:white:wan"; + gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; + }; + + wan_amber { + label = "d7800:amber:wan"; + gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; + }; + + wps { + label = "d7800:white:wps"; + gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; + }; + + esata { + label = "d7800:white:esata"; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; + }; + + power_white: power_white { + label = "d7800:white:power"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + + wifi { + label = "d7800:white:wifi"; + gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&adm_dma { + status = "ok"; +}; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-db149.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-db149.dts new file mode 100644 index 0000000000..4c56866077 --- /dev/null +++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-db149.dts @@ -0,0 +1,236 @@ +#include "qcom-ipq8064-v1.0.dtsi" + +/ { + model = "Qualcomm IPQ8064/DB149"; + compatible = "qcom,ipq8064-db149", "qcom,ipq8064"; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; + + alias { + serial0 = &uart2; + mdio-gpio0 = &mdio0; + }; + + chosen { + linux,stdout-path = "serial0:115200n8"; + }; + + soc { + pinmux@800000 { + i2c4_pins: i2c4_pinmux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + bias-disable; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + drive-strength = <10>; + bias-none; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + rgmii0_pins: rgmii0_pins { + mux { + pins = "gpio2", "gpio66"; + drive-strength = <8>; + bias-disable; + }; + }; + }; + + gsbi2: gsbi@12480000 { + qcom,mode = ; + status = "ok"; + uart2: serial@12490000 { + status = "ok"; + }; + }; + + gsbi5: gsbi@1a200000 { + qcom,mode = ; + status = "ok"; + + spi4: spi@1a280000 { + status = "ok"; + spi-max-frequency = <50000000>; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 0>; + + flash: m25p80@0 { + compatible = "s25fl256s1"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + m25p,fast-read; + + partition@0 { + label = "lowlevel_init"; + reg = <0x0 0x1b0000>; + }; + + partition@1 { + label = "u-boot"; + reg = <0x1b0000 0x80000>; + }; + + partition@2 { + label = "u-boot-env"; + reg = <0x230000 0x40000>; + }; + + partition@3 { + label = "caldata"; + reg = <0x270000 0x40000>; + }; + + partition@4 { + label = "firmware"; + reg = <0x2b0000 0x1d50000>; + }; + }; + }; + }; + + sata-phy@1b400000 { + status = "ok"; + }; + + sata@29000000 { + status = "ok"; + }; + + phy@100f8800 { /* USB3 port 1 HS phy */ + status = "ok"; + }; + + phy@100f8830 { /* USB3 port 1 SS phy */ + status = "ok"; + }; + + phy@110f8800 { /* USB3 port 0 HS phy */ + status = "ok"; + }; + + phy@110f8830 { /* USB3 port 0 SS phy */ + status = "ok"; + }; + + usb30@0 { + status = "ok"; + }; + + usb30@1 { + status = "ok"; + }; + + pcie0: pci@1b500000 { + status = "ok"; + }; + + pcie1: pci@1b700000 { + status = "ok"; + }; + + pcie2: pci@1b900000 { + status = "ok"; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; + + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x000e4 0x6a545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + >; + }; + + phy4: ethernet-phy@4 { + device_type = "ethernet-phy"; + reg = <4>; + }; + + phy6: ethernet-phy@6 { + device_type = "ethernet-phy"; + reg = <6>; + }; + + phy7: ethernet-phy@7 { + device_type = "ethernet-phy"; + reg = <7>; + }; + }; + + gmac0: ethernet@37000000 { + status = "ok"; + phy-mode = "rgmii"; + qcom,id = <0>; + phy-handle = <&phy4>; + + pinctrl-0 = <&rgmii0_pins>; + pinctrl-names = "default"; + }; + + gmac1: ethernet@37200000 { + status = "ok"; + phy-mode = "sgmii"; + qcom,id = <1>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + gmac2: ethernet@37400000 { + status = "ok"; + phy-mode = "sgmii"; + qcom,id = <2>; + phy-handle = <&phy6>; + }; + + gmac3: ethernet@37600000 { + status = "ok"; + phy-mode = "sgmii"; + qcom,id = <3>; + phy-handle = <&phy7>; + }; + }; +}; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts new file mode 100644 index 0000000000..a9c5248237 --- /dev/null +++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts @@ -0,0 +1,406 @@ +#include "qcom-ipq8064-v1.0.dtsi" + +#include + +/ { + model = "Linksys EA8500 WiFi Router"; + compatible = "linksys,ea8500", "qcom,ipq8064"; + + memory@0 { + reg = <0x42000000 0x1e000000>; + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; + + aliases { + serial0 = &gsbi4_serial; + mdio-gpio0 = &mdio0; + + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + }; + + chosen { + bootargs = "console=ttyMSM0,115200n8"; + linux,stdout-path = "serial0:115200n8"; + append-rootblock = "ubi.mtd="; /* append to bootargs adding the root deviceblock nbr from bootloader */ + }; + + soc { + pinmux@800000 { + button_pins: button_pins { + mux { + pins = "gpio65", "gpio67", "gpio68"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + i2c4_pins: i2c4_pinmux { + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <12>; + bias-disable; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio6", "gpio53", "gpio54"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + nand_pins: nand_pins { + mux { + pins = "gpio34", "gpio35", "gpio36", + "gpio37", "gpio38", "gpio39", + "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; + function = "nand"; + drive-strength = <10>; + bias-disable; + }; + pullups { + pins = "gpio39"; + bias-pull-up; + }; + hold { + pins = "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; + bias-bus-hold; + }; + }; + + rgmii2_pins: rgmii2_pins { + mux { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + }; + }; + + gsbi@16300000 { + qcom,mode = ; + status = "ok"; + serial@16340000 { + status = "ok"; + }; + /* + * The i2c device on gsbi4 should not be enabled. + * On ipq806x designs gsbi4 i2c is meant for exclusive + * RPM usage. Turning this on in kernel manifests as + * i2c failure for the RPM. + */ + }; + + sata-phy@1b400000 { + status = "ok"; + }; + + sata@29000000 { + status = "ok"; + }; + + phy@100f8800 { /* USB3 port 1 HS phy */ + status = "ok"; + }; + + phy@100f8830 { /* USB3 port 1 SS phy */ + status = "ok"; + }; + + phy@110f8800 { /* USB3 port 0 HS phy */ + status = "ok"; + }; + + phy@110f8830 { /* USB3 port 0 SS phy */ + status = "ok"; + }; + + usb30@0 { + status = "ok"; + }; + + usb30@1 { + status = "ok"; + }; + + pcie0: pci@1b500000 { + status = "ok"; + force_gen1 = <1>; + }; + + pcie1: pci@1b700000 { + status = "ok"; + }; + + pcie2: pci@1b900000 { + status = "ok"; + }; + + nand@1ac00000 { + status = "ok"; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + cs0 { + reg = <0>; + compatible = "qcom,nandcs"; + + nand-ecc-strength = <4>; + nand-bus-width = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + SBL1@0 { + label = "SBL1"; + reg = <0x0000000 0x0040000>; + read-only; + }; + + MIBIB@40000 { + label = "MIBIB"; + reg = <0x0040000 0x0140000>; + read-only; + }; + + SBL2@180000 { + label = "SBL2"; + reg = <0x0180000 0x0140000>; + read-only; + }; + + SBL3@2c0000 { + label = "SBL3"; + reg = <0x02c0000 0x0280000>; + read-only; + }; + + DDRCONFIG@540000 { + label = "DDRCONFIG"; + reg = <0x0540000 0x0120000>; + read-only; + }; + + SSD@660000 { + label = "SSD"; + reg = <0x0660000 0x0120000>; + read-only; + }; + + TZ@780000 { + label = "TZ"; + reg = <0x0780000 0x0280000>; + read-only; + }; + + RPM@a00000 { + label = "RPM"; + reg = <0x0a00000 0x0280000>; + read-only; + }; + + art: art@c80000 { + label = "art"; + reg = <0x0c80000 0x0140000>; + read-only; + }; + + APPSBL@dc0000 { + label = "APPSBL"; + reg = <0x0dc0000 0x0100000>; + read-only; + }; + + u_env@ec0000 { + label = "u_env"; + reg = <0x0ec0000 0x0040000>; + }; + + s_env@f00000 { + label = "s_env"; + reg = <0x0f00000 0x0040000>; + }; + + devinfo@f40000 { + label = "devinfo"; + reg = <0x0f40000 0x0040000>; + }; + + linux@f80000 { + label = "kernel1"; + reg = <0x0f80000 0x2800000>; /* 3 MB spill to rootfs*/ + }; + + rootfs@1280000 { + label = "rootfs1"; + reg = <0x1280000 0x2500000>; + }; + + linux2@3780000 { + label = "kernel2"; + reg = <0x3780000 0x2800000>; + }; + + rootfs2@3a80000 { + label = "rootfs2"; + reg = <0x3a80000 0x2500000>; + }; + + syscfg@5f80000 { + label = "syscfg"; + reg = <0x5f80000 0x2080000>; + }; + }; + }; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x000e4 0x6a545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + >; + }; + + phy4: ethernet-phy@4 { + device_type = "ethernet-phy"; + reg = <4>; + }; + }; + + gmac1: ethernet@37200000 { + status = "ok"; + phy-mode = "rgmii"; + qcom,id = <1>; + qcom,phy_mdio_addr = <4>; + qcom,poll_required = <1>; + qcom,rgmii_delay = <0>; + qcom,emulation = <0>; + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + //lan + gmac2: ethernet@37400000 { + status = "ok"; + phy-mode = "sgmii"; + qcom,id = <2>; + qcom,phy_mdio_addr = <0>; /* none */ + qcom,poll_required = <0>; /* no polling */ + qcom,rgmii_delay = <0>; + qcom,emulation = <0>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + rpm@108000 { + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + }; + + adm_dma: dma@18300000 { + status = "ok"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + wifi { + label = "wifi"; + gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + wps { + label = "ea8500:green:wps"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + }; + + power: power { + label = "ea8500:white:power"; + gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + wifi { + label = "ea8500:green:wifi"; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; + }; + }; +}; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500.dts new file mode 100644 index 0000000000..3445a79251 --- /dev/null +++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500.dts @@ -0,0 +1,394 @@ +#include "qcom-ipq8064-v1.0.dtsi" + +#include +#include + +/ { + model = "Netgear Nighthawk X4 R7500"; + compatible = "netgear,r7500", "qcom,ipq8064"; + + memory@0 { + reg = <0x42000000 0xe000000>; + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; + + aliases { + serial0 = &gsbi4_serial; + mdio-gpio0 = &mdio0; + + led-boot = &power_white; + led-failsafe = &power_amber; + led-running = &power_white; + led-upgrade = &power_amber; + }; + + chosen { + bootargs = "rootfstype=squashfs noinitrd"; + linux,stdout-path = "serial0:115200n8"; + }; + + soc { + pinmux@800000 { + button_pins: button_pins { + mux { + pins = "gpio6", "gpio54", "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + i2c4_pins: i2c4_pinmux { + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <12>; + bias-disable; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23", + "gpio24","gpio26", "gpio53", "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + nand_pins: nand_pins { + mux { + pins = "gpio34", "gpio35", "gpio36", + "gpio37", "gpio38", "gpio39", + "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; + function = "nand"; + drive-strength = <10>; + bias-disable; + }; + pullups { + pins = "gpio39"; + bias-pull-up; + }; + hold { + pins = "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; + bias-bus-hold; + }; + }; + + rgmii2_pins: rgmii2_pins { + mux { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + }; + }; + + gsbi@16300000 { + qcom,mode = ; + status = "ok"; + serial@16340000 { + status = "ok"; + }; + /* + * The i2c device on gsbi4 should not be enabled. + * On ipq806x designs gsbi4 i2c is meant for exclusive + * RPM usage. Turning this on in kernel manifests as + * i2c failure for the RPM. + */ + }; + + sata-phy@1b400000 { + status = "ok"; + }; + + sata@29000000 { + status = "ok"; + }; + + phy@100f8800 { /* USB3 port 1 HS phy */ + clocks = <&gcc USB30_0_UTMI_CLK>; + status = "ok"; + }; + + phy@100f8830 { /* USB3 port 1 SS phy */ + clocks = <&gcc USB30_0_MASTER_CLK>; + status = "ok"; + }; + + phy@110f8800 { /* USB3 port 0 HS phy */ + clocks = <&gcc USB30_1_UTMI_CLK>; + status = "ok"; + }; + + phy@110f8830 { /* USB3 port 0 SS phy */ + clocks = <&gcc USB30_1_MASTER_CLK>; + status = "ok"; + }; + + usb30@0 { + clocks = <&gcc USB30_1_MASTER_CLK>; + status = "ok"; + }; + + usb30@1 { + clocks = <&gcc USB30_0_MASTER_CLK>; + status = "ok"; + }; + + pcie0: pci@1b500000 { + status = "ok"; + }; + + pcie1: pci@1b700000 { + status = "ok"; + force_gen1 = <1>; + }; + + nand@1ac00000 { + status = "ok"; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + cs0 { + reg = <0>; + compatible = "qcom,nandcs"; + + nand-ecc-strength = <4>; + nand-bus-width = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + qcadata@0 { + label = "qcadata"; + reg = <0x0000000 0x0c80000>; + read-only; + }; + + APPSBL@c80000 { + label = "APPSBL"; + reg = <0x0c80000 0x0500000>; + read-only; + }; + + APPSBLENV@1180000 { + label = "APPSBLENV"; + reg = <0x1180000 0x0080000>; + read-only; + }; + + art: art@1200000 { + label = "art"; + reg = <0x1200000 0x0140000>; + read-only; + }; + + kernel@1340000 { + label = "kernel"; + reg = <0x1340000 0x0200000>; + }; + + ubi@1540000 { + label = "ubi"; + reg = <0x1540000 0x1800000>; + }; + + netgear@2d40000 { + label = "netgear"; + reg = <0x2d40000 0x0c00000>; + read-only; + }; + + reserve@3940000 { + label = "reserve"; + reg = <0x3940000 0x46c0000>; + read-only; + }; + + firmware@1340000 { + label = "firmware"; + reg = <0x1340000 0x1a00000>; + }; + }; + }; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x000e4 0x6a545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + >; + }; + + phy4: ethernet-phy@4 { + device_type = "ethernet-phy"; + reg = <4>; + }; + }; + + gmac1: ethernet@37200000 { + status = "ok"; + phy-mode = "rgmii"; + qcom,id = <1>; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + + mtd-mac-address = <&art 6>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + gmac2: ethernet@37400000 { + status = "ok"; + phy-mode = "sgmii"; + qcom,id = <2>; + + mtd-mac-address = <&art 0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + rpm@108000 { + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + wifi { + label = "wifi"; + gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + usb1 { + label = "r7500:white:usb1"; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; + }; + + usb2 { + label = "r7500:white:usb2"; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; + }; + + power_amber: power_amber { + label = "r7500:amber:power"; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; + }; + + wan_white { + label = "r7500:white:wan"; + gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; + }; + + wan_amber { + label = "r7500:amber:wan"; + gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; + }; + + wps { + label = "r7500:white:wps"; + gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; + }; + + esata { + label = "r7500:white:esata"; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; + }; + + power_white: power_white { + label = "r7500:white:power"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + + wifi { + label = "r7500:white:wifi"; + gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&tcsr { + qcom,usb-ctrl-select = ; + compatible = "qcom,tcsr"; +}; + +&adm_dma { + status = "ok"; +}; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts new file mode 100644 index 0000000000..c4b0c4b5a7 --- /dev/null +++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts @@ -0,0 +1,425 @@ +#include "qcom-ipq8064-v1.0.dtsi" + +#include + +/ { + model = "Netgear Nighthawk X4 R7500v2"; + compatible = "netgear,r7500v2", "qcom,ipq8064"; + + memory@0 { + reg = <0x42000000 0x1e000000>; + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + + rsvd@5fe00000 { + reg = <0x5fe00000 0x200000>; + reusable; + }; + }; + + aliases { + serial0 = &gsbi4_serial; + mdio-gpio0 = &mdio0; + + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + }; + + chosen { + bootargs = "rootfstype=squashfs noinitrd"; + linux,stdout-path = "serial0:115200n8"; + }; + + soc { + pinmux@800000 { + button_pins: button_pins { + mux { + pins = "gpio6", "gpio54", "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + i2c4_pins: i2c4_pinmux { + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <12>; + bias-disable; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23", + "gpio24","gpio26", "gpio53", "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + nand_pins: nand_pins { + mux { + pins = "gpio34", "gpio35", "gpio36", + "gpio37", "gpio38", "gpio39", + "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; + function = "nand"; + drive-strength = <10>; + bias-disable; + }; + pullups { + pins = "gpio39"; + bias-pull-up; + }; + hold { + pins = "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; + bias-bus-hold; + }; + }; + + rgmii2_pins: rgmii2_pins { + mux { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + }; + + usb0_pwr_en_pins: usb0_pwr_en_pins { + mux { + pins = "gpio15"; + function = "gpio"; + drive-strength = <12>; + bias-pull-down; + output-high; + }; + }; + + usb1_pwr_en_pins: usb1_pwr_en_pins { + mux { + pins = "gpio16", "gpio68"; + function = "gpio"; + drive-strength = <12>; + bias-pull-down; + output-high; + }; + }; + }; + + gsbi@16300000 { + qcom,mode = ; + status = "ok"; + serial@16340000 { + status = "ok"; + }; + /* + * The i2c device on gsbi4 should not be enabled. + * On ipq806x designs gsbi4 i2c is meant for exclusive + * RPM usage. Turning this on in kernel manifests as + * i2c failure for the RPM. + */ + }; + + sata-phy@1b400000 { + status = "ok"; + }; + + sata@29000000 { + status = "ok"; + }; + + phy@100f8800 { /* USB3 port 1 HS phy */ + status = "ok"; + }; + + phy@100f8830 { /* USB3 port 1 SS phy */ + status = "ok"; + }; + + phy@110f8800 { /* USB3 port 0 HS phy */ + status = "ok"; + }; + + phy@110f8830 { /* USB3 port 0 SS phy */ + status = "ok"; + }; + + usb30@0 { + status = "ok"; + + pinctrl-0 = <&usb0_pwr_en_pins>; + pinctrl-names = "default"; + }; + + usb30@1 { + status = "ok"; + + pinctrl-0 = <&usb1_pwr_en_pins>; + pinctrl-names = "default"; + }; + + pcie0: pci@1b500000 { + status = "ok"; + reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pcie0_pins>; + pinctrl-names = "default"; + }; + + pcie1: pci@1b700000 { + status = "ok"; + reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pcie1_pins>; + pinctrl-names = "default"; + force_gen1 = <1>; + }; + + nand@1ac00000 { + status = "ok"; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + cs0 { + reg = <0>; + compatible = "qcom,nandcs"; + + nand-ecc-strength = <4>; + nand-bus-width = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + qcadata@0 { + label = "qcadata"; + reg = <0x0000000 0x0c80000>; + read-only; + }; + + APPSBL@c80000 { + label = "APPSBL"; + reg = <0x0c80000 0x0500000>; + read-only; + }; + + APPSBLENV@1180000 { + label = "APPSBLENV"; + reg = <0x1180000 0x0080000>; + read-only; + }; + + art: art@1200000 { + label = "art"; + reg = <0x1200000 0x0140000>; + read-only; + }; + + artbak: art@1340000 { + label = "artbak"; + reg = <0x1340000 0x0140000>; + read-only; + }; + + kernel@1480000 { + label = "kernel"; + reg = <0x1480000 0x0200000>; + }; + + ubi@1680000 { + label = "ubi"; + reg = <0x1680000 0x1E00000>; + }; + + netgear@3480000 { + label = "netgear"; + reg = <0x3480000 0x4480000>; + read-only; + }; + + reserve@7900000 { + label = "reserve"; + reg = <0x7900000 0x0700000>; + read-only; + }; + + firmware@1480000 { + label = "firmware"; + reg = <0x1480000 0x2000000>; + }; + }; + }; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x000e4 0xaa545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + >; + }; + + phy4: ethernet-phy@4 { + device_type = "ethernet-phy"; + reg = <4>; + }; + }; + + gmac1: ethernet@37200000 { + status = "ok"; + phy-mode = "rgmii"; + qcom,id = <1>; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + + mtd-mac-address = <&art 6>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + gmac2: ethernet@37400000 { + status = "ok"; + phy-mode = "sgmii"; + qcom,id = <2>; + + mtd-mac-address = <&art 0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + rpm@108000 { + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + wifi { + label = "wifi"; + gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + usb1 { + label = "r7500v2:amber:usb1"; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; + }; + + usb3 { + label = "r7500v2:amber:usb3"; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; + }; + + status { + label = "r7500v2:amber:status"; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; + }; + + internet { + label = "r7500v2:white:internet"; + gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; + }; + + wan { + label = "r7500v2:white:wan"; + gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; + }; + + wps { + label = "r7500v2:white:wps"; + gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; + }; + + esata { + label = "r7500v2:white:esata"; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; + }; + + power: power { + label = "r7500v2:white:power"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + + wifi { + label = "r7500v2:white:wifi"; + gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&adm_dma { + status = "ok"; +}; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts new file mode 100644 index 0000000000..561c49aaa6 --- /dev/null +++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts @@ -0,0 +1,424 @@ +#include "qcom-ipq8064-v1.0.dtsi" + +#include + +/ { + model = "TP-Link Archer VR2600v"; + compatible = "tplink,vr2600v", "qcom,ipq8064"; + + memory@0 { + reg = <0x42000000 0x1e000000>; + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; + + aliases { + serial0 = &gsbi4_serial; + mdio-gpio0 = &mdio0; + + led-boot = &power; + led-failsafe = &general; + led-running = &power; + led-upgrade = &general; + }; + + chosen { + linux,stdout-path = "serial0:115200n8"; + }; + + soc { + pinmux@800000 { + led_pins: led_pins { + mux { + pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17", + "gpio26", "gpio53", "gpio56", "gpio66"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + i2c4_pins: i2c4_pinmux { + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <12>; + bias-disable; + }; + }; + + button_pins: button_pins { + mux { + pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + bias-pull-down; + }; + + data { + pins = "gpio18", "gpio19"; + drive-strength = <10>; + }; + + cs { + pins = "gpio20"; + drive-strength = <10>; + bias-pull-up; + }; + + clk { + pins = "gpio21"; + drive-strength = <12>; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + rgmii2_pins: rgmii2_pins { + mux { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + }; + }; + + gsbi@16300000 { + qcom,mode = ; + status = "ok"; + serial@16340000 { + status = "ok"; + }; + /* + * The i2c device on gsbi4 should not be enabled. + * On ipq806x designs gsbi4 i2c is meant for exclusive + * RPM usage. Turning this on in kernel manifests as + * i2c failure for the RPM. + */ + }; + + gsbi5: gsbi@1a200000 { + qcom,mode = ; + status = "ok"; + + spi4: spi@1a280000 { + status = "ok"; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; + + flash: W25Q128@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + SBL1@0 { + label = "SBL1"; + reg = <0x0 0x20000>; + read-only; + }; + + MIBIB@20000 { + label = "MIBIB"; + reg = <0x20000 0x20000>; + read-only; + }; + + SBL2@40000 { + label = "SBL2"; + reg = <0x40000 0x40000>; + read-only; + }; + + SBL3@80000 { + label = "SBL3"; + reg = <0x80000 0x80000>; + read-only; + }; + + DDRCONFIG@100000 { + label = "DDRCONFIG"; + reg = <0x100000 0x10000>; + read-only; + }; + + SSD@110000 { + label = "SSD"; + reg = <0x110000 0x10000>; + read-only; + }; + + TZ@120000 { + label = "TZ"; + reg = <0x120000 0x80000>; + read-only; + }; + + RPM@1a0000 { + label = "RPM"; + reg = <0x1a0000 0x80000>; + read-only; + }; + + APPSBL@220000 { + label = "APPSBL"; + reg = <0x220000 0x80000>; + read-only; + }; + + APPSBLENV@2a0000 { + label = "APPSBLENV"; + reg = <0x2a0000 0x40000>; + read-only; + }; + + OLDART@2e0000 { + label = "OLDART"; + reg = <0x2e0000 0x40000>; + read-only; + }; + + kernel@320000 { + label = "kernel"; + reg = <0x320000 0x200000>; + }; + + rootfs@520000 { + label = "rootfs"; + reg = <0x520000 0xa60000>; + }; + + defaultmac: default-mac@0xfaf100 { + label = "default-mac"; + reg = <0xfaf100 0x00200>; + read-only; + }; + + ART@fc0000 { + label = "ART"; + reg = <0xfc0000 0x40000>; + read-only; + }; + }; + }; + }; + + phy@100f8800 { /* USB3 port 1 HS phy */ + status = "ok"; + }; + + phy@100f8830 { /* USB3 port 1 SS phy */ + status = "ok"; + }; + + phy@110f8800 { /* USB3 port 0 HS phy */ + status = "ok"; + }; + + phy@110f8830 { /* USB3 port 0 SS phy */ + status = "ok"; + }; + + usb30@0 { + status = "ok"; + }; + + usb30@1 { + status = "ok"; + }; + + pcie0: pci@1b500000 { + status = "ok"; + }; + + pcie1: pci@1b700000 { + status = "ok"; + force_gen1 = <1>; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x000e4 0x6a545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + >; + }; + + phy4: ethernet-phy@4 { + device_type = "ethernet-phy"; + reg = <4>; + }; + }; + + gmac1: ethernet@37200000 { + status = "ok"; + phy-mode = "rgmii"; + qcom,id = <1>; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + + mtd-mac-address = <&defaultmac 0>; + mtd-mac-address-increment = <1>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + gmac2: ethernet@37400000 { + status = "ok"; + phy-mode = "sgmii"; + qcom,id = <2>; + + mtd-mac-address = <&defaultmac 0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + rpm@108000 { + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + wifi { + label = "wifi"; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + dect { + label = "dect"; + gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + ledswitch { + label = "ledswitch"; + gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + dsl { + label = "vr2600v:white:dsl"; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; + }; + + usb { + label = "vr2600v:white:usb"; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; + }; + + lan { + label = "vr2600v:white:lan"; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; + }; + + wlan2g { + label = "vr2600v:white:wlan2g"; + gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>; + }; + + wlan5g { + label = "vr2600v:white:wlan5g"; + gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>; + }; + + power: power { + label = "vr2600v:white:power"; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + + phone { + label = "vr2600v:white:phone"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + }; + + wan { + label = "vr2600v:white:wan"; + gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>; + }; + + general: general { + label = "vr2600v:white:general"; + gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&adm_dma { + status = "ok"; +}; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts new file mode 100644 index 0000000000..9440de5b8f --- /dev/null +++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts @@ -0,0 +1,570 @@ +/* + * BSD LICENSE + * + * Copyright (C) 2017 Christian Mehlis + * Copyright (C) 2018 Mathias Kresin + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the names of the copyright holders nor the names of any + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include "qcom-ipq8064-v1.0.dtsi" + +#include +#include + +/ { + compatible = "compex,wpq864", "qcom,ipq8064"; + model = "Compex WPQ864"; + + aliases { + mdio-gpio0 = &mdio0; + serial0 = &gsbi4_serial; + ethernet0 = &gmac1; + ethernet1 = &gmac0; + + led-boot = &led_pass; + led-failsafe = &led_fail; + led-running = &led_pass; + led-upgrade = &led_pass; + }; + + chosen { + linux,stdout-path = "serial0:115200n8"; + }; + + soc { + rpm@108000 { + pinctrl-0 = <&rpm_pins>; + pinctrl-names = "default"; + }; + + nand@1ac00000 { + status = "okay"; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + mt29f2g08abbeah4@0 { + compatible = "qcom,nandcs"; + + reg = <0>; + + nand-ecc-strength = <4>; + nand-bus-width = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + SBL1@0 { + label = "SBL1"; + reg = <0x0000000 0x0040000>; + read-only; + }; + + MIBIB@40000 { + label = "MIBIB"; + reg = <0x0040000 0x0140000>; + read-only; + }; + + SBL2@180000 { + label = "SBL2"; + reg = <0x0180000 0x0140000>; + read-only; + }; + + SBL3@2c0000 { + label = "SBL3"; + reg = <0x02c0000 0x0280000>; + read-only; + }; + + DDRCONFIG@540000 { + label = "DDRCONFIG"; + reg = <0x0540000 0x0120000>; + read-only; + }; + + SSD@660000 { + label = "SSD"; + reg = <0x0660000 0x0120000>; + read-only; + }; + + TZ@780000 { + label = "TZ"; + reg = <0x0780000 0x0280000>; + read-only; + }; + + RPM@a00000 { + label = "RPM"; + reg = <0x0a00000 0x0280000>; + read-only; + }; + + APPSBL@c80000 { + label = "APPSBL"; + reg = <0x0c80000 0x0500000>; + read-only; + }; + + APPSBLENV@1180000 { + label = "APPSBLENV"; + reg = <0x1180000 0x0080000>; + }; + + ART@1200000 { + label = "ART"; + reg = <0x1200000 0x0140000>; + }; + + ubi@1340000 { + label = "ubi"; + reg = <0x1340000 0x4000000>; + }; + + BOOTCONFIG@1340000 { + label = "BOOTCONFIG"; + reg = <0x5340000 0x0060000>; + }; + + SBL2-1@53a0000- { + label = "SBL2_1"; + reg = <0x53a0000 0x0140000>; + read-only; + }; + + SBL3-1@54e0000 { + label = "SBL3_1"; + reg = <0x54e0000 0x0280000>; + read-only; + }; + + DDRCONFIG-1@5760000 { + label = "DDRCONFIG_1"; + reg = <0x5760000 0x0120000>; + read-only; + }; + + SSD-1@5880000 { + label = "SSD_1"; + reg = <0x5880000 0x0120000>; + read-only; + }; + + TZ-1@59a0000 { + label = "TZ_1"; + reg = <0x59a0000 0x0280000>; + read-only; + }; + + RPM-1@5c20000 { + label = "RPM_1"; + reg = <0x5c20000 0x0280000>; + read-only; + }; + + BOOTCONFIG1@5ea0000 { + label = "BOOTCONFIG1"; + reg = <0x5ea0000 0x0060000>; + }; + + APPSBL-1@5f00000 { + label = "APPSBL_1"; + reg = <0x5f00000 0x0500000>; + read-only; + }; + + ubi-1@6400000 { + label = "ubi_1"; + reg = <0x6400000 0x4000000>; + }; + + unused@a400000 { + label = "unused"; + reg = <0xa400000 0x5c00000>; + }; + }; + }; + }; + }; + + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "virtual,mdio-gpio"; + + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; + + ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x000e4 0x6a545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + >; + }; + + ethernet-phy@4 { + device_type = "ethernet-phy"; + reg = <4>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + rss4 { + label = "wpq864:green:rss4"; + gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; + }; + + rss3 { + label = "wpq864:green:rss3"; + gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + + rss2 { + label = "wpq864:orange:rss2"; + gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>; + }; + + rss1 { + label = "wpq864:red:rss1"; + gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; + }; + + led_pass: pass { + label = "wpq864:green:pass"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + }; + + led_fail: fail { + label = "wpq864:green:fail"; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; + }; + + usb { + label = "wpq864:green:usb"; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; + }; + + usb-pcie { + label = "wpq864:green:usb-pcie"; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + beeper { + compatible = "gpio-beeper"; + + pinctrl-0 = <&beeper_pins>; + pinctrl-names = "default"; + + gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>; + }; +}; + +&adm_dma { + status = "okay"; +}; + +&gmac1 { + status = "okay"; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + + phy-mode = "rgmii"; + qcom,id = <1>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&gmac2 { + status = "okay"; + + phy-mode = "sgmii"; + qcom,id = <2>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&gsbi4 { + status = "okay"; + qcom,mode = ; +}; + +&gsbi4_serial { + status = "okay"; + + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; +}; + +&gsbi5 { + status = "okay"; + + qcom,mode = ; + + spi@1a280000 { + status = "okay"; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; + + s25fl256s1@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <50000000>; + }; + }; +}; + +&hs_phy_0 { /* USB3 port 0 HS phy */ + status = "okay"; +}; + +&hs_phy_1 { /* USB3 port 1 HS phy */ + status = "okay"; +}; + +&ss_phy_0 { /* USB3 port 0 SS phy */ + status = "okay"; + + rx_eq = <2>; + tx_deamp_3_5db = <32>; + mpll = <160>; +}; + +&ss_phy_1 { /* USB3 port 1 SS phy */ + status = "okay"; + + rx_eq = <2>; + tx_deamp_3_5db = <32>; + mpll = <160>; +}; + +&pcie0 { + status = "okay"; + + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + /delete-property/ perst-gpios; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie2 { + status = "okay"; + + /delete-property/ pinctrl-0; + /delete-property/ pinctrl-names; + /delete-property/ perst-gpios; +}; + +&qcom_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinctrl0 { + pcie0_pcie2_perst { + pins = "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio7", "gpio8", "gpio9", "gpio22", + "gpio23", "gpio24", "gpio25", "gpio53"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + button_pins: button_pins { + mux { + pins = "gpio54"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + beeper_pins: beeper_pins { + mux { + pins = "gpio55"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + rpm_pins: rpm_pins { + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <10>; + bias-disable; + }; + }; + + uart0_pins: uart0_pins { + mux { + pins = "gpio10", "gpio11"; + function = "gsbi4"; + drive-strength = <10>; + bias-disable; + }; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19"; + function = "gsbi5"; + drive-strength = <10>; + bias-pull-down; + }; + + clk { + pins = "gpio21"; + function = "gsbi5"; + drive-strength = <12>; + bias-pull-down; + }; + + cs { + pins = "gpio20"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + nand_pins: nand_pins { + mux { + pins = "gpio34", "gpio35", "gpio36", "gpio37", + "gpio38", "gpio39", "gpio40", "gpio41", + "gpio42", "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; + function = "nand"; + drive-strength = <10>; + bias-disable; + }; + + pullups { + pins = "gpio39"; + bias-pull-up; + }; + + hold { + pins = "gpio40", "gpio41", "gpio42", "gpio43", + "gpio44", "gpio45", "gpio46", "gpio47"; + bias-bus-hold; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + }; + + rgmii2_pins: rgmii2_pins { + mux { + pins = "gpio27", "gpio28", "gpio29", "gpio30", + "gpio31", "gpio32", "gpio51", "gpio52", + "gpio59", "gpio60", "gpio61", "gpio62"; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + }; +}; + +&usb3_0 { + status = "okay"; +}; + + +&usb3_1 { + status = "okay"; +}; + +&tcsr { + qcom,usb-ctrl-select = ; +}; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064.dtsi b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064.dtsi new file mode 100644 index 0000000000..b400991bd6 --- /dev/null +++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -0,0 +1,1333 @@ +/dts-v1/; + +#include "skeleton.dtsi" +#include +#include +#include +#include +#include +#include +#include +#include + +/ { + model = "Qualcomm IPQ8064"; + compatible = "qcom,ipq8064"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + clocks = <&kraitcc 0>, <&kraitcc 4>; + clock-names = "cpu", "l2"; + clock-latency = <100000>; + cpu-supply = <&smb208_s2a>; + voltage-tolerance = <5>; + cooling-min-state = <0>; + cooling-max-state = <10>; + #cooling-cells = <2>; + cpu-idle-states = <&CPU_SPC>; + }; + + cpu1: cpu@1 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + clocks = <&kraitcc 1>, <&kraitcc 4>; + clock-names = "cpu", "l2"; + clock-latency = <100000>; + cpu-supply = <&smb208_s2b>; + cooling-min-state = <0>; + cooling-max-state = <10>; + #cooling-cells = <2>; + cpu-idle-states = <&CPU_SPC>; + }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + qcom,saw = <&saw_l2>; + }; + + qcom,l2 { + qcom,l2-rates = <384000000 1000000000 1200000000>; + }; + + idle-states { + CPU_SPC: spc { + compatible = "qcom,idle-state-spc", + "arm,idle-state"; + entry-latency-us = <400>; + exit-latency-us = <900>; + min-residency-us = <3000>; + }; + }; + }; + + thermal-zones { + tsens_tz_sensor0 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 0>; + + trips { + cpu-critical-hi { + temperature = <125000>; + hysteresis = <2000>; + type = "critical_high"; + }; + + cpu-config-hi { + temperature = <105000>; + hysteresis = <2000>; + type = "configurable_hi"; + }; + + cpu-config-lo { + temperature = <95000>; + hysteresis = <2000>; + type = "configurable_lo"; + }; + + cpu-critical-low { + temperature = <0>; + hysteresis = <2000>; + type = "critical_low"; + }; + }; + }; + + tsens_tz_sensor1 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 1>; + + trips { + cpu-critical-hi { + temperature = <125000>; + hysteresis = <2000>; + type = "critical_high"; + }; + + cpu-config-hi { + temperature = <105000>; + hysteresis = <2000>; + type = "configurable_hi"; + }; + + cpu-config-lo { + temperature = <95000>; + hysteresis = <2000>; + type = "configurable_lo"; + }; + + cpu-critical-low { + temperature = <0>; + hysteresis = <2000>; + type = "critical_low"; + }; + }; + }; + + tsens_tz_sensor2 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 2>; + + trips { + cpu-critical-hi { + temperature = <125000>; + hysteresis = <2000>; + type = "critical_high"; + }; + + cpu-config-hi { + temperature = <105000>; + hysteresis = <2000>; + type = "configurable_hi"; + }; + + cpu-config-lo { + temperature = <95000>; + hysteresis = <2000>; + type = "configurable_lo"; + }; + + cpu-critical-low { + temperature = <0>; + hysteresis = <2000>; + type = "critical_low"; + }; + }; + }; + + tsens_tz_sensor3 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 3>; + + trips { + cpu-critical-hi { + temperature = <125000>; + hysteresis = <2000>; + type = "critical_high"; + }; + + cpu-config-hi { + temperature = <105000>; + hysteresis = <2000>; + type = "configurable_hi"; + }; + + cpu-config-lo { + temperature = <95000>; + hysteresis = <2000>; + type = "configurable_lo"; + }; + + cpu-critical-low { + temperature = <0>; + hysteresis = <2000>; + type = "critical_low"; + }; + }; + }; + + tsens_tz_sensor4 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 4>; + + trips { + cpu-critical-hi { + temperature = <125000>; + hysteresis = <2000>; + type = "critical_high"; + }; + + cpu-config-hi { + temperature = <105000>; + hysteresis = <2000>; + type = "configurable_hi"; + }; + + cpu-config-lo { + temperature = <95000>; + hysteresis = <2000>; + type = "configurable_lo"; + }; + + cpu-critical-low { + temperature = <0>; + hysteresis = <2000>; + type = "critical_low"; + }; + }; + }; + + tsens_tz_sensor5 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 5>; + + trips { + cpu-critical-hi { + temperature = <125000>; + hysteresis = <2000>; + type = "critical_high"; + }; + + cpu-config-hi { + temperature = <105000>; + hysteresis = <2000>; + type = "configurable_hi"; + }; + + cpu-config-lo { + temperature = <95000>; + hysteresis = <2000>; + type = "configurable_lo"; + }; + + cpu-critical-low { + temperature = <0>; + hysteresis = <2000>; + type = "critical_low"; + }; + }; + }; + + tsens_tz_sensor6 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 6>; + + trips { + cpu-critical-hi { + temperature = <125000>; + hysteresis = <2000>; + type = "critical_high"; + }; + + cpu-config-hi { + temperature = <105000>; + hysteresis = <2000>; + type = "configurable_hi"; + }; + + cpu-config-lo { + temperature = <95000>; + hysteresis = <2000>; + type = "configurable_lo"; + }; + + cpu-critical-low { + temperature = <0>; + hysteresis = <2000>; + type = "critical_low"; + }; + }; + }; + + tsens_tz_sensor7 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 7>; + + trips { + cpu-critical-hi { + temperature = <125000>; + hysteresis = <2000>; + type = "critical_high"; + }; + + cpu-config-hi { + temperature = <105000>; + hysteresis = <2000>; + type = "configurable_hi"; + }; + + cpu-config-lo { + temperature = <95000>; + hysteresis = <2000>; + type = "configurable_lo"; + }; + + cpu-critical-low { + temperature = <0>; + hysteresis = <2000>; + type = "critical_low"; + }; + }; + }; + + tsens_tz_sensor8 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 8>; + + trips { + cpu-critical-hi { + temperature = <125000>; + hysteresis = <2000>; + type = "critical_high"; + }; + + cpu-config-hi { + temperature = <105000>; + hysteresis = <2000>; + type = "configurable_hi"; + }; + + cpu-config-lo { + temperature = <95000>; + hysteresis = <2000>; + type = "configurable_lo"; + }; + + cpu-critical-low { + temperature = <0>; + hysteresis = <2000>; + type = "critical_low"; + }; + }; + }; + + tsens_tz_sensor9 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 9>; + + trips { + cpu-critical-hi { + temperature = <125000>; + hysteresis = <2000>; + type = "critical_high"; + }; + + cpu-config-hi { + temperature = <105000>; + hysteresis = <2000>; + type = "configurable_hi"; + }; + + cpu-config-lo { + temperature = <95000>; + hysteresis = <2000>; + type = "configurable_lo"; + }; + + cpu-critical-low { + temperature = <0>; + hysteresis = <2000>; + type = "critical_low"; + }; + }; + }; + + tsens_tz_sensor10 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 10>; + + trips { + cpu-critical-hi { + temperature = <125000>; + hysteresis = <2000>; + type = "critical_high"; + }; + + cpu-config-hi { + temperature = <105000>; + hysteresis = <2000>; + type = "configurable_hi"; + }; + + cpu-config-lo { + temperature = <95000>; + hysteresis = <2000>; + type = "configurable_lo"; + }; + + cpu-critical-low { + temperature = <0>; + hysteresis = <2000>; + type = "critical_low"; + }; + }; + }; + }; + + cpu-pmu { + compatible = "qcom,krait-pmu"; + interrupts = <1 10 0x304>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + nss@40000000 { + reg = <0x40000000 0x1000000>; + no-map; + }; + + smem: smem@41000000 { + reg = <0x41000000 0x200000>; + no-map; + }; + }; + + clocks { + cxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + pxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-ipq806x"; + }; + }; + + kraitcc: clock-controller { + compatible = "qcom,krait-cc-v1"; + #clock-cells = <1>; + }; + + qcom,pvs { + qcom,pvs-format-a; + qcom,speed0-pvs0-bin-v0 = + < 1400000000 1250000 >, + < 1200000000 1200000 >, + < 1000000000 1150000 >, + < 800000000 1100000 >, + < 600000000 1050000 >, + < 384000000 1000000 >; + + qcom,speed0-pvs1-bin-v0 = + < 1400000000 1175000 >, + < 1200000000 1125000 >, + < 1000000000 1075000 >, + < 800000000 1025000 >, + < 600000000 975000 >, + < 384000000 925000 >; + + qcom,speed0-pvs2-bin-v0 = + < 1400000000 1125000 >, + < 1200000000 1075000 >, + < 1000000000 1025000 >, + < 800000000 995000 >, + < 600000000 925000 >, + < 384000000 875000 >; + + qcom,speed0-pvs3-bin-v0 = + < 1400000000 1050000 >, + < 1200000000 1000000 >, + < 1000000000 950000 >, + < 800000000 900000 >, + < 600000000 850000 >, + < 384000000 800000 >; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + lpass@28100000 { + compatible = "qcom,lpass-cpu"; + status = "disabled"; + clocks = <&lcc AHBIX_CLK>, + <&lcc MI2S_OSR_CLK>, + <&lcc MI2S_BIT_CLK>; + clock-names = "ahbix-clk", + "mi2s-osr-clk", + "mi2s-bit-clk"; + interrupts = <0 85 1>; + interrupt-names = "lpass-irq-lpaif"; + reg = <0x28100000 0x10000>; + reg-names = "lpass-lpaif"; + }; + + qfprom: qfprom@700000 { + compatible = "qcom,qfprom", "syscon"; + reg = <0x700000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + status = "okay"; + tsens_calib: calib@400 { + reg = <0x400 0x10>; + }; + tsens_backup: backup@410 { + reg = <0x410 0x10>; + }; + }; + + rpm@108000 { + compatible = "qcom,rpm-ipq8064"; + reg = <0x108000 0x1000>; + qcom,ipc = <&l2cc 0x8 2>; + + interrupts = <0 19 0>, + <0 21 0>, + <0 22 0>; + interrupt-names = "ack", + "err", + "wakeup"; + + clocks = <&gcc RPM_MSG_RAM_H_CLK>; + clock-names = "ram"; + + #address-cells = <1>; + #size-cells = <0>; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc"; + #clock-cells = <1>; + }; + + regulators { + compatible = "qcom,rpm-smb208-regulators"; + + smb208_s1a: s1a { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + + }; + + smb208_s1b: s1b { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1150000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2a: s2a { + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1250000>; + + qcom,switch-mode-frequency = <1200000>; + }; + + smb208_s2b: s2b { + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1250000>; + + qcom,switch-mode-frequency = <1200000>; + }; + }; + }; + + rng@1a500000 { + compatible = "qcom,prng"; + reg = <0x1a500000 0x200>; + clocks = <&gcc PRNG_CLK>; + clock-names = "core"; + }; + + qcom_pinmux: pinmux@800000 { + compatible = "qcom,ipq8064-pinctrl"; + reg = <0x800000 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 16 0x4>; + + pcie0_pins: pcie0_pinmux { + mux { + pins = "gpio3"; + function = "pcie1_rst"; + drive-strength = <2>; + bias-disable; + }; + }; + + pcie1_pins: pcie1_pinmux { + mux { + pins = "gpio48"; + function = "pcie2_rst"; + drive-strength = <2>; + bias-disable; + }; + }; + + pcie2_pins: pcie2_pinmux { + mux { + pins = "gpio63"; + function = "pcie3_rst"; + drive-strength = <2>; + bias-disable; + output-low; + }; + }; + }; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x02000000 0x1000>, + <0x02002000 0x1000>; + }; + + timer@200a000 { + compatible = "qcom,kpss-timer", "qcom,msm-timer"; + interrupts = <1 1 0x301>, + <1 2 0x301>, + <1 3 0x301>, + <1 4 0x301>, + <1 5 0x301>; + reg = <0x0200a000 0x100>; + clock-frequency = <25000000>, + <32768>; + clocks = <&sleep_clk>; + clock-names = "sleep"; + cpu-offset = <0x80000>; + }; + + acc0: clock-controller@2088000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + clock-output-names = "acpu0_aux"; + }; + + acc1: clock-controller@2098000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + clock-output-names = "acpu1_aux"; + }; + + l2cc: clock-controller@2011000 { + compatible = "qcom,kpss-gcc", "syscon"; + reg = <0x2011000 0x1000>; + clock-output-names = "acpu_l2_aux"; + }; + + saw0: regulator@2089000 { + compatible = "qcom,saw2", "syscon"; + reg = <0x02089000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + saw1: regulator@2099000 { + compatible = "qcom,saw2", "syscon"; + reg = <0x02099000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + saw_l2: regulator@02012000 { + compatible = "qcom,saw2", "syscon"; + reg = <0x02012000 0x1000>; + regulator; + }; + + sic_non_secure: sic-non-secure@12100000 { + compatible = "syscon"; + reg = <0x12100000 0x10000>; + }; + + gsbi2: gsbi@12480000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <2>; + reg = <0x12480000 0x100>; + clocks = <&gcc GSBI2_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + syscon-tcsr = <&tcsr>; + + uart2: serial@12490000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x12490000 0x1000>, + <0x12480000 0x1000>; + interrupts = <0 195 0x0>; + clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + i2c@124a0000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x124a0000 0x1000>; + interrupts = <0 196 0>; + + clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + }; + + gsbi4: gsbi@16300000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <4>; + reg = <0x16300000 0x100>; + clocks = <&gcc GSBI4_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + syscon-tcsr = <&tcsr>; + + gsbi4_serial: serial@16340000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16340000 0x1000>, + <0x16300000 0x1000>; + interrupts = <0 152 0x0>; + clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + i2c@16380000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16380000 0x1000>; + interrupts = <0 153 0>; + + clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gsbi5: gsbi@1a200000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <5>; + reg = <0x1a200000 0x100>; + clocks = <&gcc GSBI5_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + syscon-tcsr = <&tcsr>; + + uart5: serial@1a240000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x1a240000 0x1000>, + <0x1a200000 0x1000>; + interrupts = <0 154 0x0>; + clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + i2c@1a280000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x1a280000 0x1000>; + interrupts = <0 155 0>; + + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + spi@1a280000 { + compatible = "qcom,spi-qup-v1.1.1"; + reg = <0x1a280000 0x1000>; + interrupts = <0 155 0>; + + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + sata_phy: sata-phy@1b400000 { + compatible = "qcom,ipq806x-sata-phy"; + reg = <0x1b400000 0x200>; + + clocks = <&gcc SATA_PHY_CFG_CLK>; + clock-names = "cfg"; + + #phy-cells = <0>; + status = "disabled"; + }; + + sata@29000000 { + compatible = "qcom,ipq806x-ahci", "generic-ahci"; + reg = <0x29000000 0x180>; + + interrupts = <0 209 0x0>; + + clocks = <&gcc SFAB_SATA_S_H_CLK>, + <&gcc SATA_H_CLK>, + <&gcc SATA_A_CLK>, + <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + clock-names = "slave_face", "iface", "core", + "rxoob", "pmalive"; + + assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>; + assigned-clock-rates = <100000000>, <100000000>; + + phys = <&sata_phy>; + phy-names = "sata-phy"; + status = "disabled"; + }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x00500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-ipq8064"; + reg = <0x00900000 0x4000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + tsens: thermal-sensor@900000 { + compatible = "qcom,ipq8064-tsens"; + reg = <0x900000 0x3680>; + nvmem-cells = <&tsens_calib>, <&tsens_backup>; + nvmem-cell-names = "calib", "calib_backup"; + interrupts = <0 178 0>; + #thermal-sensor-cells = <1>; + }; + + tcsr: syscon@1a400000 { + compatible = "qcom,tcsr-ipq8064", "syscon"; + reg = <0x1a400000 0x100>; + }; + + lcc: clock-controller@28000000 { + compatible = "qcom,lcc-ipq8064"; + reg = <0x28000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + sfpb_mutex_block: syscon@1200600 { + compatible = "syscon"; + reg = <0x01200600 0x100>; + }; + + hs_phy_1: phy@100f8800 { + compatible = "qcom,dwc3-hs-usb-phy"; + reg = <0x100f8800 0x30>; + clocks = <&gcc USB30_1_UTMI_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + + status = "disabled"; + }; + + ss_phy_1: phy@100f8830 { + compatible = "qcom,dwc3-ss-usb-phy"; + reg = <0x100f8830 0x30>; + clocks = <&gcc USB30_1_MASTER_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + + status = "disabled"; + }; + + hs_phy_0: phy@110f8800 { + compatible = "qcom,dwc3-hs-usb-phy"; + reg = <0x110f8800 0x30>; + clocks = <&gcc USB30_0_UTMI_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + + status = "disabled"; + }; + + ss_phy_0: phy@110f8830 { + compatible = "qcom,dwc3-ss-usb-phy"; + reg = <0x110f8830 0x30>; + clocks = <&gcc USB30_0_MASTER_CLK>; + clock-names = "ref"; + #phy-cells = <0>; + + status = "disabled"; + }; + + usb3_0: usb30@0 { + compatible = "qcom,dwc3"; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gcc USB30_0_MASTER_CLK>; + clock-names = "core"; + + ranges; + + resets = <&gcc USB30_0_MASTER_RESET>; + reset-names = "usb30_0_mstr_rst"; + + status = "disabled"; + + dwc3@11000000 { + compatible = "snps,dwc3"; + reg = <0x11000000 0xcd00>; + interrupts = <0 110 0x4>; + phys = <&hs_phy_0>, <&ss_phy_0>; + phy-names = "usb2-phy", "usb3-phy"; + dr_mode = "host"; + snps,dis_u3_susphy_quirk; + }; + }; + + usb3_1: usb30@1 { + compatible = "qcom,dwc3"; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&gcc USB30_1_MASTER_CLK>; + clock-names = "core"; + + ranges; + + resets = <&gcc USB30_1_MASTER_RESET>; + reset-names = "usb30_1_mstr_rst"; + + status = "disabled"; + + dwc3@10000000 { + compatible = "snps,dwc3"; + reg = <0x10000000 0xcd00>; + interrupts = <0 205 0x4>; + phys = <&hs_phy_1>, <&ss_phy_1>; + phy-names = "usb2-phy", "usb3-phy"; + dr_mode = "host"; + snps,dis_u3_susphy_quirk; + }; + }; + + pcie0: pci@1b500000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b500000 0x1000 + 0x1b502000 0x80 + 0x1b600000 0x100 + 0x0ff00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */ + 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */ + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc PCIE_A_CLK>, + <&gcc PCIE_H_CLK>, + <&gcc PCIE_PHY_CLK>, + <&gcc PCIE_AUX_CLK>, + <&gcc PCIE_ALT_REF_CLK>; + clock-names = "core", "iface", "phy", "aux", "ref"; + + assigned-clocks = <&gcc PCIE_ALT_REF_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc PCIE_ACLK_RESET>, + <&gcc PCIE_HCLK_RESET>, + <&gcc PCIE_POR_RESET>, + <&gcc PCIE_PCI_RESET>, + <&gcc PCIE_PHY_RESET>, + <&gcc PCIE_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + + pinctrl-0 = <&pcie0_pins>; + pinctrl-names = "default"; + + perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; + + phy-tx0-term-offset = <7>; + + status = "disabled"; + }; + + pcie1: pci@1b700000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b700000 0x1000 + 0x1b702000 0x80 + 0x1b800000 0x100 + 0x31f00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */ + 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */ + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc PCIE_1_A_CLK>, + <&gcc PCIE_1_H_CLK>, + <&gcc PCIE_1_PHY_CLK>, + <&gcc PCIE_1_AUX_CLK>, + <&gcc PCIE_1_ALT_REF_CLK>; + clock-names = "core", "iface", "phy", "aux", "ref"; + + assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc PCIE_1_ACLK_RESET>, + <&gcc PCIE_1_HCLK_RESET>, + <&gcc PCIE_1_POR_RESET>, + <&gcc PCIE_1_PCI_RESET>, + <&gcc PCIE_1_PHY_RESET>, + <&gcc PCIE_1_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + + pinctrl-0 = <&pcie1_pins>; + pinctrl-names = "default"; + + perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; + + phy-tx0-term-offset = <7>; + + status = "disabled"; + }; + + pcie2: pci@1b900000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b900000 0x1000 + 0x1b902000 0x80 + 0x1ba00000 0x100 + 0x35f00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <2>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */ + 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */ + + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc PCIE_2_A_CLK>, + <&gcc PCIE_2_H_CLK>, + <&gcc PCIE_2_PHY_CLK>, + <&gcc PCIE_2_AUX_CLK>, + <&gcc PCIE_2_ALT_REF_CLK>; + clock-names = "core", "iface", "phy", "aux", "ref"; + + assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc PCIE_2_ACLK_RESET>, + <&gcc PCIE_2_HCLK_RESET>, + <&gcc PCIE_2_POR_RESET>, + <&gcc PCIE_2_PCI_RESET>, + <&gcc PCIE_2_PHY_RESET>, + <&gcc PCIE_2_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + + pinctrl-0 = <&pcie2_pins>; + pinctrl-names = "default"; + + perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>; + + phy-tx0-term-offset = <7>; + + status = "disabled"; + }; + + adm_dma: dma@18300000 { + compatible = "qcom,adm"; + reg = <0x18300000 0x100000>; + interrupts = <0 170 0>; + #dma-cells = <1>; + + clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>; + clock-names = "core", "iface"; + + resets = <&gcc ADM0_RESET>, + <&gcc ADM0_PBUS_RESET>, + <&gcc ADM0_C0_RESET>, + <&gcc ADM0_C1_RESET>, + <&gcc ADM0_C2_RESET>; + reset-names = "clk", "pbus", "c0", "c1", "c2"; + qcom,ee = <0>; + + status = "disabled"; + }; + + nand@1ac00000 { + compatible = "qcom,ipq806x-nand"; + reg = <0x1ac00000 0x800>; + + clocks = <&gcc EBI2_CLK>, + <&gcc EBI2_AON_CLK>; + clock-names = "core", "aon"; + + dmas = <&adm_dma 3>; + dma-names = "rxtx"; + qcom,cmd-crci = <15>; + qcom,data-crci = <3>; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + nss_common: syscon@03000000 { + compatible = "syscon"; + reg = <0x03000000 0x0000FFFF>; + }; + + qsgmii_csr: syscon@1bb00000 { + compatible = "syscon"; + reg = <0x1bb00000 0x000001FF>; + }; + + stmmac_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <7>; + snps,rd_osr_lmt = <7>; + snps,blen = <16 0 0 0 0 0 0>; + }; + + gmac0: ethernet@37000000 { + device_type = "network"; + compatible = "qcom,ipq806x-gmac"; + reg = <0x37000000 0x200000>; + interrupts = ; + interrupt-names = "macirq"; + + snps,axi-config = <&stmmac_axi_setup>; + snps,pbl = <32>; + snps,aal = <1>; + + qcom,nss-common = <&nss_common>; + qcom,qsgmii-csr = <&qsgmii_csr>; + + clocks = <&gcc GMAC_CORE1_CLK>; + clock-names = "stmmaceth"; + + resets = <&gcc GMAC_CORE1_RESET>; + reset-names = "stmmaceth"; + + status = "disabled"; + }; + + gmac1: ethernet@37200000 { + device_type = "network"; + compatible = "qcom,ipq806x-gmac"; + reg = <0x37200000 0x200000>; + interrupts = ; + interrupt-names = "macirq"; + + snps,axi-config = <&stmmac_axi_setup>; + snps,pbl = <32>; + snps,aal = <1>; + + qcom,nss-common = <&nss_common>; + qcom,qsgmii-csr = <&qsgmii_csr>; + + clocks = <&gcc GMAC_CORE2_CLK>; + clock-names = "stmmaceth"; + + resets = <&gcc GMAC_CORE2_RESET>; + reset-names = "stmmaceth"; + + status = "disabled"; + }; + + gmac2: ethernet@37400000 { + device_type = "network"; + compatible = "qcom,ipq806x-gmac"; + reg = <0x37400000 0x200000>; + interrupts = ; + interrupt-names = "macirq"; + + snps,axi-config = <&stmmac_axi_setup>; + snps,pbl = <32>; + snps,aal = <1>; + + qcom,nss-common = <&nss_common>; + qcom,qsgmii-csr = <&qsgmii_csr>; + + clocks = <&gcc GMAC_CORE3_CLK>; + clock-names = "stmmaceth"; + + resets = <&gcc GMAC_CORE3_RESET>; + reset-names = "stmmaceth"; + + status = "disabled"; + }; + + gmac3: ethernet@37600000 { + device_type = "network"; + compatible = "qcom,ipq806x-gmac"; + reg = <0x37600000 0x200000>; + interrupts = ; + interrupt-names = "macirq"; + + snps,axi-config = <&stmmac_axi_setup>; + snps,pbl = <32>; + snps,aal = <1>; + + qcom,nss-common = <&nss_common>; + qcom,qsgmii-csr = <&qsgmii_csr>; + + clocks = <&gcc GMAC_CORE4_CLK>; + clock-names = "stmmaceth"; + + resets = <&gcc GMAC_CORE4_RESET>; + reset-names = "stmmaceth"; + + status = "disabled"; + }; + }; + + sfpb_mutex: sfpb-mutex { + compatible = "qcom,sfpb-mutex"; + syscon = <&sfpb_mutex_block 4 4>; + + #hwlock-cells = <1>; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem>; + hwlocks = <&sfpb_mutex 3>; + }; +}; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts new file mode 100644 index 0000000000..2f829795bc --- /dev/null +++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts @@ -0,0 +1,393 @@ +#include "qcom-ipq8065-v1.0.dtsi" + +#include + +/ { + model = "ZyXEL NBG6817"; + compatible = "zyxel,nbg6817", "qcom,ipq8065"; + + memory@0 { + reg = <0x42000000 0x1e000000>; + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; + + aliases { + serial0 = &gsbi4_serial; + mdio-gpio0 = &mdio0; + sdcc1 = &sdcc1; + + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + }; + + chosen { + bootargs = "rootfstype=squashfs,ext4 rootwait noinitrd"; + linux,stdout-path = "serial0:115200n8"; + append-rootblock = "root=/dev/mmcblk0p"; + }; + + soc { + pinmux@800000 { + button_pins: button_pins { + mux { + pins = "gpio53", "gpio54", "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + i2c4_pins: i2c4_pinmux { + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <12>; + bias-disable; + }; + }; + + led_pins: led_pins { + mux { + pins = "gpio9", "gpio26", "gpio33", "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + clk { + pins = "gpio1"; + input-disable; + }; + }; + + rgmii2_pins: rgmii2_pins { + mux { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + + tx { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ; + input-disable; + }; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + drive-strength = <10>; + bias-none; + }; + + cs { + pins = "gpio20"; + drive-strength = <12>; + }; + }; + + usb0_pwr_en_pins: usb0_pwr_en_pins { + mux { + pins = "gpio16", "gpio17"; + function = "gpio"; + drive-strength = <12>; + }; + + pwr { + pins = "gpio17"; + bias-pull-down; + output-high; + }; + + ovc { + pins = "gpio16"; + bias-pull-up; + }; + }; + + usb1_pwr_en_pins: usb1_pwr_en_pins { + mux { + pins = "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <12>; + }; + + pwr { + pins = "gpio14"; + bias-pull-down; + output-high; + }; + + ovc { + pins = "gpio15"; + bias-pull-up; + }; + }; + }; + + gsbi@16300000 { + qcom,mode = ; + status = "ok"; + serial@16340000 { + status = "ok"; + }; + /* + * The i2c device on gsbi4 should not be enabled. + * On ipq806x designs gsbi4 i2c is meant for exclusive + * RPM usage. Turning this on in kernel manifests as + * i2c failure for the RPM. + */ + }; + + gsbi5: gsbi@1a200000 { + qcom,mode = ; + status = "ok"; + + spi4: spi@1a280000 { + status = "ok"; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; + + flash: m25p80@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <51200000>; + reg = <0>; + + partitions { + compatible = "qcom,smem"; + }; + }; + }; + }; + + phy@100f8800 { /* USB3 port 1 HS phy */ + status = "ok"; + }; + + phy@100f8830 { /* USB3 port 1 SS phy */ + status = "ok"; + }; + + phy@110f8800 { /* USB3 port 0 HS phy */ + status = "ok"; + }; + + phy@110f8830 { /* USB3 port 0 SS phy */ + status = "ok"; + }; + + usb30@0 { + status = "ok"; + + pinctrl-0 = <&usb0_pwr_en_pins>; + pinctrl-names = "default"; + }; + + usb30@1 { + status = "ok"; + + pinctrl-0 = <&usb1_pwr_en_pins>; + pinctrl-names = "default"; + }; + + pcie0: pci@1b500000 { + status = "ok"; + reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pcie0_pins>; + pinctrl-names = "default"; + }; + + pcie1: pci@1b700000 { + status = "ok"; + reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pcie1_pins>; + pinctrl-names = "default"; + force_gen1 = <1>; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x000e4 0xaa545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */ + 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */ + 0x00978 0x19008643 /* QM_PORT1_CTRL0 */ + 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */ + 0x00980 0x19008643 /* QM_PORT2_CTRL0 */ + 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */ + 0x00988 0x19008643 /* QM_PORT3_CTRL0 */ + 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */ + 0x00990 0x19008643 /* QM_PORT4_CTRL0 */ + 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */ + 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */ + 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */ + 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */ + 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */ + >; + }; + + phy4: ethernet-phy@4 { + device_type = "ethernet-phy"; + reg = <4>; + qca,ar8327-initvals = < + 0x000e4 0x6a545 /* MAC_POWER_SEL */ + 0x0000c 0x80 /* PAD6_MODE */ + >; + }; + }; + + gmac1: ethernet@37200000 { + status = "ok"; + phy-mode = "rgmii"; + qcom,id = <1>; + qcom,phy_mdio_addr = <4>; + qcom,poll_required = <0>; + qcom,rgmii_delay = <1>; + qcom,phy_mii_type = <0>; + qcom,emulation = <0>; + qcom,irq = <255>; + mdiobus = <&mdio0>; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + gmac2: ethernet@37400000 { + status = "ok"; + phy-mode = "sgmii"; + qcom,id = <2>; + qcom,phy_mdio_addr = <0>; /* none */ + qcom,poll_required = <0>; /* no polling */ + qcom,rgmii_delay = <0>; + qcom,phy_mii_type = <1>; + qcom,emulation = <0>; + qcom,irq = <258>; + mdiobus = <&mdio0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + rpm@108000 { + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + }; + + amba { + sdcc1: sdcc@12400000 { + status = "okay"; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + wifi { + label = "wifi"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + }; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + internet { + label = "nbg6817:white:internet"; + gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; + }; + + power: power { + label = "nbg6817:white:power"; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + + wifi2g { + label = "nbg6817:amber:wifi2g"; + gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>; + }; + + /* wifi2g amber from the manual is missing */ + + wifi5g { + label = "nbg6817:amber:wifi5g"; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; + }; + + /* wifi5g amber from the manual is missing */ + }; +}; + +&adm_dma { + status = "ok"; +}; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-r7800.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-r7800.dts new file mode 100644 index 0000000000..63cb42a3e2 --- /dev/null +++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-r7800.dts @@ -0,0 +1,575 @@ +#include "qcom-ipq8065-v1.0.dtsi" + +#include + +/ { + model = "Netgear Nighthawk X4S R7800"; + compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064"; + + memory@0 { + reg = <0x42000000 0x1e000000>; + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + + rsvd@5fe00000 { + reg = <0x5fe00000 0x200000>; + reusable; + }; + }; + + aliases { + serial0 = &gsbi4_serial; + mdio-gpio0 = &mdio0; + + led-boot = &power_white; + led-failsafe = &power_amber; + led-running = &power_white; + led-upgrade = &power_amber; + }; + + chosen { + linux,stdout-path = "serial0:115200n8"; + }; + + soc { + pinmux@800000 { + button_pins: button_pins { + mux { + pins = "gpio6", "gpio54", "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + i2c4_pins: i2c4_pinmux { + mux { + pins = "gpio12", "gpio13"; + function = "gsbi4"; + drive-strength = <12>; + bias-disable; + }; + }; + + led_pins: led_pins { + pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23", + "gpio24","gpio26", "gpio53", "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + nand_pins: nand_pins { + mux { + pins = "gpio34", "gpio35", "gpio36", + "gpio37", "gpio38", "gpio39", + "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; + function = "nand"; + drive-strength = <10>; + bias-disable; + }; + pullups { + pins = "gpio39"; + bias-pull-up; + }; + hold { + pins = "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; + bias-bus-hold; + }; + }; + + mdio0_pins: mdio0_pins { + mux { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + clk { + pins = "gpio1"; + input-disable; + }; + }; + + rgmii2_pins: rgmii2_pins { + mux { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", + "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; + function = "rgmii2"; + drive-strength = <8>; + bias-disable; + }; + + tx { + pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ; + input-disable; + }; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + bias-pull-down; + }; + + data { + pins = "gpio18", "gpio19"; + drive-strength = <10>; + }; + + cs { + pins = "gpio20"; + drive-strength = <10>; + bias-pull-up; + }; + + clk { + pins = "gpio21"; + drive-strength = <12>; + }; + }; + + spi6_pins: spi6_pins { + mux { + pins = "gpio55", "gpio56", "gpio58"; + function = "gsbi6"; + bias-pull-down; + }; + + mosi { + pins = "gpio55"; + drive-strength = <12>; + }; + + miso { + pins = "gpio56"; + drive-strength = <14>; + }; + + cs { + pins = "gpio57"; + drive-strength = <12>; + bias-pull-up; + }; + + clk { + pins = "gpio58"; + drive-strength = <12>; + }; + + reset { + pins = "gpio33"; + drive-strength = <10>; + bias-pull-down; + output-high; + }; + }; + + usb0_pwr_en_pins: usb0_pwr_en_pins { + mux { + pins = "gpio15"; + function = "gpio"; + drive-strength = <12>; + bias-pull-down; + output-high; + }; + }; + + usb1_pwr_en_pins: usb1_pwr_en_pins { + mux { + pins = "gpio16", "gpio68"; + function = "gpio"; + drive-strength = <12>; + bias-pull-down; + output-high; + }; + }; + }; + + gsbi@16300000 { + qcom,mode = ; + status = "ok"; + serial@16340000 { + status = "ok"; + }; + /* + * The i2c device on gsbi4 should not be enabled. + * On ipq806x designs gsbi4 i2c is meant for exclusive + * RPM usage. Turning this on in kernel manifests as + * i2c failure for the RPM. + */ + }; + + gsbi5: gsbi@1a200000 { + qcom,mode = ; + status = "ok"; + + spi5: spi@1a280000 { + status = "ok"; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; + + flash: m25p80@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + partitions { + compatible = "qcom,smem"; + }; + }; + }; + }; + + gsbi6: gsbi@16500000 { + qcom,mode = ; + status = "ok"; + spi6: spi@16580000 { + status = "ok"; + + pinctrl-0 = <&spi6_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>; + + spi-nor@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <6000000>; + }; + }; + }; + + sata-phy@1b400000 { + status = "ok"; + }; + + sata@29000000 { + ports-implemented = <0x1>; + status = "ok"; + }; + + phy@100f8800 { /* USB3 port 1 HS phy */ + status = "ok"; + }; + + phy@100f8830 { /* USB3 port 1 SS phy */ + status = "ok"; + }; + + phy@110f8800 { /* USB3 port 0 HS phy */ + status = "ok"; + }; + + phy@110f8830 { /* USB3 port 0 SS phy */ + status = "ok"; + }; + + usb30@0 { + status = "ok"; + + pinctrl-0 = <&usb0_pwr_en_pins>; + pinctrl-names = "default"; + }; + + usb30@1 { + status = "ok"; + + pinctrl-0 = <&usb1_pwr_en_pins>; + pinctrl-names = "default"; + }; + + pcie0: pci@1b500000 { + status = "ok"; + }; + + pcie1: pci@1b700000 { + status = "ok"; + force_gen1 = <1>; + }; + + nand@1ac00000 { + status = "ok"; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + cs0 { + reg = <0>; + compatible = "qcom,nandcs"; + + nand-ecc-strength = <4>; + nand-bus-width = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + qcadata@0 { + label = "qcadata"; + reg = <0x0000000 0x0c80000>; + read-only; + }; + + APPSBL@c80000 { + label = "APPSBL"; + reg = <0x0c80000 0x0500000>; + read-only; + }; + + APPSBLENV@1180000 { + label = "APPSBLENV"; + reg = <0x1180000 0x0080000>; + read-only; + }; + + art: art@1200000 { + label = "art"; + reg = <0x1200000 0x0140000>; + read-only; + }; + + artbak: art@1340000 { + label = "artbak"; + reg = <0x1340000 0x0140000>; + read-only; + }; + + kernel@1480000 { + label = "kernel"; + reg = <0x1480000 0x0200000>; + }; + + ubi@1680000 { + label = "ubi"; + reg = <0x1680000 0x1E00000>; + }; + + netgear@3480000 { + label = "netgear"; + reg = <0x3480000 0x4480000>; + read-only; + }; + + reserve@7900000 { + label = "reserve"; + reg = <0x7900000 0x0700000>; + read-only; + }; + + firmware@1480000 { + label = "firmware"; + reg = <0x1480000 0x2000000>; + }; + }; + }; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + + + phy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + qca,ar8327-initvals = < + 0x00004 0x7600000 /* PAD0_MODE */ + 0x00008 0x1000000 /* PAD5_MODE */ + 0x0000c 0x80 /* PAD6_MODE */ + 0x000e4 0xaa545 /* MAC_POWER_SEL */ + 0x000e0 0xc74164de /* SGMII_CTRL */ + 0x0007c 0x4e /* PORT0_STATUS */ + 0x00094 0x4e /* PORT6_STATUS */ + 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */ + 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */ + 0x00978 0x19008643 /* QM_PORT1_CTRL0 */ + 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */ + 0x00980 0x19008643 /* QM_PORT2_CTRL0 */ + 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */ + 0x00988 0x19008643 /* QM_PORT3_CTRL0 */ + 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */ + 0x00990 0x19008643 /* QM_PORT4_CTRL0 */ + 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */ + 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */ + 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */ + 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */ + 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */ + >; + qca,ar8327-vlans = < + 0x1 0x5e /* VLAN1 Ports 1/2/3/4/6 */ + 0x2 0x21 /* VLAN2 Ports 0/5 */ + >; + }; + + phy4: ethernet-phy@4 { + device_type = "ethernet-phy"; + reg = <4>; + qca,ar8327-initvals = < + 0x000e4 0x6a545 /* MAC_POWER_SEL */ + 0x0000c 0x80 /* PAD6_MODE */ + >; + }; + }; + + gmac1: ethernet@37200000 { + status = "ok"; + phy-mode = "rgmii"; + qcom,id = <1>; + qcom,phy_mdio_addr = <4>; + qcom,poll_required = <0>; + qcom,rgmii_delay = <1>; + qcom,phy_mii_type = <0>; + qcom,emulation = <0>; + qcom,irq = <255>; + mdiobus = <&mdio0>; + + pinctrl-0 = <&rgmii2_pins>; + pinctrl-names = "default"; + + mtd-mac-address = <&art 6>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + gmac2: ethernet@37400000 { + status = "ok"; + phy-mode = "sgmii"; + qcom,id = <2>; + qcom,phy_mdio_addr = <0>; /* none */ + qcom,poll_required = <0>; /* no polling */ + qcom,rgmii_delay = <0>; + qcom,phy_mii_type = <1>; + qcom,emulation = <0>; + qcom,irq = <258>; + mdiobus = <&mdio0>; + + mtd-mac-address = <&art 0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + rpm@108000 { + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "default"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&button_pins>; + pinctrl-names = "default"; + + wifi { + label = "wifi"; + gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + wakeup-source; + }; + + reset { + label = "reset"; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + wakeup-source; + }; + + wps { + label = "wps"; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + wakeup-source; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + power_white: power_white { + label = "r7800:white:power"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + + power_amber: power_amber { + label = "r7800:amber:power"; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; + }; + + wan_white { + label = "r7800:white:wan"; + gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; + }; + + wan_amber { + label = "r7800:amber:wan"; + gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; + }; + + usb1 { + label = "r7800:white:usb1"; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; + }; + + usb2 { + label = "r7800:white:usb2"; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; + }; + + esata { + label = "r7800:white:esata"; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; + }; + + wifi { + label = "r7800:white:wifi"; + gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; + }; + + wps { + label = "r7800:white:wps"; + gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&adm_dma { + status = "ok"; +}; diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-v1.0.dtsi b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-v1.0.dtsi new file mode 100644 index 0000000000..22b5338cc0 --- /dev/null +++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-v1.0.dtsi @@ -0,0 +1 @@ +#include "qcom-ipq8065.dtsi" diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065.dtsi b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065.dtsi new file mode 100644 index 0000000000..15f3b95f85 --- /dev/null +++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065.dtsi @@ -0,0 +1,164 @@ +#include "qcom-ipq8064.dtsi" + +/ { + model = "Qualcomm IPQ8065"; + compatible = "qcom,ipq8065", "qcom,ipq8064"; + + qcom,pvs { + qcom,pvs-format-a; + qcom,speed0-pvs0-bin-v0 = + < 1725000000 1262500 >, + < 1400000000 1175000 >, + < 1000000000 1100000 >, + < 800000000 1050000 >, + < 600000000 1000000 >, + < 384000000 975000 >; + qcom,speed0-pvs1-bin-v0 = + < 1725000000 1225000 >, + < 1400000000 1150000 >, + < 1000000000 1075000 >, + < 800000000 1025000 >, + < 600000000 975000 >, + < 384000000 950000 >; + qcom,speed0-pvs2-bin-v0 = + < 1725000000 1200000 >, + < 1400000000 1125000 >, + < 1000000000 1050000 >, + < 800000000 1000000 >, + < 600000000 950000 >, + < 384000000 925000 >; + qcom,speed0-pvs3-bin-v0 = + < 1725000000 1175000 >, + < 1400000000 1100000 >, + < 1000000000 1025000 >, + < 800000000 975000 >, + < 600000000 925000 >, + < 384000000 900000 >; + qcom,speed0-pvs4-bin-v0 = + < 1725000000 1150000 >, + < 1400000000 1075000 >, + < 1000000000 1000000 >, + < 800000000 950000 >, + < 600000000 900000 >, + < 384000000 875000 >; + qcom,speed0-pvs5-bin-v0 = + < 1725000000 1100000 >, + < 1400000000 1025000 >, + < 1000000000 950000 >, + < 800000000 900000 >, + < 600000000 850000 >, + < 384000000 825000 >; + qcom,speed0-pvs6-bin-v0 = + < 1725000000 1050000 >, + < 1400000000 975000 >, + < 1000000000 900000 >, + < 800000000 850000 >, + < 600000000 800000 >, + < 384000000 775000 >; + }; + + soc: soc { + + rpm@108000 { + + regulators { + + smb208_s2a: s2a { + regulator-min-microvolt = <775000>; + regulator-max-microvolt = <1275000>; + }; + + smb208_s2b: s2b { + regulator-min-microvolt = <775000>; + regulator-max-microvolt = <1275000>; + }; + }; + }; + + ss_phy_0: phy@110f8830 { + rx_eq = <2>; + tx_deamp_3_5db = <32>; + mpll = <0xa0>; + }; + ss_phy_1: phy@100f8830 { + rx_eq = <2>; + tx_deamp_3_5db = <32>; + mpll = <0xa0>; + }; + + /* Temporary fixed regulator */ + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sdcc1bam:dma@12402000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12402000 0x8000>; + interrupts = <0 98 0>; + clocks = <&gcc SDC1_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + sdcc3bam:dma@12182000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12182000 0x8000>; + interrupts = <0 96 0>; + clocks = <&gcc SDC3_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sdcc1: sdcc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x2000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; + dma-names = "tx", "rx"; + }; + + sdcc3: sdcc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x2000>; + interrupts = ; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <192000000>; + #mmc-ddr-1_8v; + sd-uhs-sdr104; + sd-uhs-ddr50; + vqmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; + dma-names = "tx", "rx"; + }; + }; + }; +}; diff --git a/target/linux/ipq806x/patches-4.14/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch b/target/linux/ipq806x/patches-4.14/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch new file mode 100644 index 0000000000..da962c7130 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch @@ -0,0 +1,71 @@ +From 28d0ed88f536dd639adf1b0c7c08e04be3c8f294 Mon Sep 17 00:00:00 2001 +From: Thomas Pedersen +Date: Mon, 16 May 2016 17:58:50 -0700 +Subject: [PATCH 01/69] dtbindings: qcom_adm: Fix channel specifiers + +Original patch from Andy Gross. + +This patch removes the crci information from the dma +channel property. At least one client device requires +using more than one CRCI value for a channel. This does +not match the current binding and the crci information +needs to be removed. + +Instead, the client device will provide this information +via other means. + +Signed-off-by: Andy Gross +Signed-off-by: Thomas Pedersen +--- + Documentation/devicetree/bindings/dma/qcom_adm.txt | 16 ++++++---------- + 1 file changed, 6 insertions(+), 10 deletions(-) + +--- a/Documentation/devicetree/bindings/dma/qcom_adm.txt ++++ b/Documentation/devicetree/bindings/dma/qcom_adm.txt +@@ -4,8 +4,7 @@ Required properties: + - compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960 + - reg: Address range for DMA registers + - interrupts: Should contain one interrupt shared by all channels +-- #dma-cells: must be <2>. First cell denotes the channel number. Second cell +- denotes CRCI (client rate control interface) flow control assignment. ++- #dma-cells: must be <1>. First cell denotes the channel number. + - clocks: Should contain the core clock and interface clock. + - clock-names: Must contain "core" for the core clock and "iface" for the + interface clock. +@@ -22,7 +21,7 @@ Example: + compatible = "qcom,adm"; + reg = <0x18300000 0x100000>; + interrupts = <0 170 0>; +- #dma-cells = <2>; ++ #dma-cells = <1>; + + clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>; + clock-names = "core", "iface"; +@@ -35,15 +34,12 @@ Example: + qcom,ee = <0>; + }; + +-DMA clients must use the format descripted in the dma.txt file, using a three ++DMA clients must use the format descripted in the dma.txt file, using a two + cell specifier for each channel. + +-Each dmas request consists of 3 cells: ++Each dmas request consists of two cells: + 1. phandle pointing to the DMA controller + 2. channel number +- 3. CRCI assignment, if applicable. If no CRCI flow control is required, use 0. +- The CRCI is used for flow control. It identifies the peripheral device that +- is the source/destination for the transferred data. + + Example: + +@@ -55,7 +51,7 @@ Example: + + cs-gpios = <&qcom_pinmux 20 0>; + +- dmas = <&adm_dma 6 9>, +- <&adm_dma 5 10>; ++ dmas = <&adm_dma 6>, ++ <&adm_dma 5>; + dma-names = "rx", "tx"; + }; diff --git a/target/linux/ipq806x/patches-4.14/0002-dmaengine-Add-ADM-driver.patch b/target/linux/ipq806x/patches-4.14/0002-dmaengine-Add-ADM-driver.patch new file mode 100644 index 0000000000..3381ae1911 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0002-dmaengine-Add-ADM-driver.patch @@ -0,0 +1,966 @@ +From 563fa24db4e529c5a3311928d73a8a90531ee527 Mon Sep 17 00:00:00 2001 +From: Thomas Pedersen +Date: Mon, 16 May 2016 17:58:51 -0700 +Subject: [PATCH 02/69] dmaengine: Add ADM driver + +Original patch by Andy Gross. + +Add the DMA engine driver for the QCOM Application Data Mover (ADM) DMA +controller found in the MSM8x60 and IPQ/APQ8064 platforms. + +The ADM supports both memory to memory transactions and memory +to/from peripheral device transactions. The controller also provides flow +control capabilities for transactions to/from peripheral devices. + +The initial release of this driver supports slave transfers to/from peripherals +and also incorporates CRCI (client rate control interface) flow control. + +Signed-off-by: Andy Gross +Signed-off-by: Thomas Pedersen +--- + drivers/dma/qcom/Kconfig | 10 + + drivers/dma/qcom/Makefile | 1 + + drivers/dma/qcom/qcom_adm.c | 900 ++++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 911 insertions(+) + create mode 100644 drivers/dma/qcom/qcom_adm.c + +--- a/drivers/dma/qcom/Kconfig ++++ b/drivers/dma/qcom/Kconfig +@@ -27,3 +27,13 @@ config QCOM_HIDMA + (user to kernel, kernel to kernel, etc.). It only supports + memcpy interface. The core is not intended for general + purpose slave DMA. ++ ++config QCOM_ADM ++ tristate "Qualcomm ADM support" ++ depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM) ++ select DMA_ENGINE ++ select DMA_VIRTUAL_CHANNELS ++ ---help--- ++ Enable support for the Qualcomm ADM DMA controller. This controller ++ provides DMA capabilities for both general purpose and on-chip ++ peripheral devices. +--- a/drivers/dma/qcom/Makefile ++++ b/drivers/dma/qcom/Makefile +@@ -4,3 +4,4 @@ obj-$(CONFIG_QCOM_HIDMA_MGMT) += hdma_mg + hdma_mgmt-objs := hidma_mgmt.o hidma_mgmt_sys.o + obj-$(CONFIG_QCOM_HIDMA) += hdma.o + hdma-objs := hidma_ll.o hidma.o hidma_dbg.o ++obj-$(CONFIG_QCOM_ADM) += qcom_adm.o +--- /dev/null ++++ b/drivers/dma/qcom/qcom_adm.c +@@ -0,0 +1,914 @@ ++/* ++ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "../dmaengine.h" ++#include "../virt-dma.h" ++ ++/* ADM registers - calculated from channel number and security domain */ ++#define ADM_CHAN_MULTI 0x4 ++#define ADM_CI_MULTI 0x4 ++#define ADM_CRCI_MULTI 0x4 ++#define ADM_EE_MULTI 0x800 ++#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan) ++#define ADM_EE_OFFS(ee) (ADM_EE_MULTI * ee) ++#define ADM_CHAN_EE_OFFS(chan, ee) (ADM_CHAN_OFFS(chan) + ADM_EE_OFFS(ee)) ++#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan) ++#define ADM_CI_OFFS(ci) (ADM_CHAN_OFF(ci)) ++#define ADM_CH_CMD_PTR(chan, ee) (ADM_CHAN_EE_OFFS(chan, ee)) ++#define ADM_CH_RSLT(chan, ee) (0x40 + ADM_CHAN_EE_OFFS(chan, ee)) ++#define ADM_CH_FLUSH_STATE0(chan, ee) (0x80 + ADM_CHAN_EE_OFFS(chan, ee)) ++#define ADM_CH_STATUS_SD(chan, ee) (0x200 + ADM_CHAN_EE_OFFS(chan, ee)) ++#define ADM_CH_CONF(chan) (0x240 + ADM_CHAN_OFFS(chan)) ++#define ADM_CH_RSLT_CONF(chan, ee) (0x300 + ADM_CHAN_EE_OFFS(chan, ee)) ++#define ADM_SEC_DOMAIN_IRQ_STATUS(ee) (0x380 + ADM_EE_OFFS(ee)) ++#define ADM_CI_CONF(ci) (0x390 + ci * ADM_CI_MULTI) ++#define ADM_GP_CTL 0x3d8 ++#define ADM_CRCI_CTL(crci, ee) (0x400 + crci * ADM_CRCI_MULTI + \ ++ ADM_EE_OFFS(ee)) ++ ++/* channel status */ ++#define ADM_CH_STATUS_VALID BIT(1) ++ ++/* channel result */ ++#define ADM_CH_RSLT_VALID BIT(31) ++#define ADM_CH_RSLT_ERR BIT(3) ++#define ADM_CH_RSLT_FLUSH BIT(2) ++#define ADM_CH_RSLT_TPD BIT(1) ++ ++/* channel conf */ ++#define ADM_CH_CONF_SHADOW_EN BIT(12) ++#define ADM_CH_CONF_MPU_DISABLE BIT(11) ++#define ADM_CH_CONF_PERM_MPU_CONF BIT(9) ++#define ADM_CH_CONF_FORCE_RSLT_EN BIT(7) ++#define ADM_CH_CONF_SEC_DOMAIN(ee) (((ee & 0x3) << 4) | ((ee & 0x4) << 11)) ++ ++/* channel result conf */ ++#define ADM_CH_RSLT_CONF_FLUSH_EN BIT(1) ++#define ADM_CH_RSLT_CONF_IRQ_EN BIT(0) ++ ++/* CRCI CTL */ ++#define ADM_CRCI_CTL_MUX_SEL BIT(18) ++#define ADM_CRCI_CTL_RST BIT(17) ++ ++/* CI configuration */ ++#define ADM_CI_RANGE_END(x) (x << 24) ++#define ADM_CI_RANGE_START(x) (x << 16) ++#define ADM_CI_BURST_4_WORDS BIT(2) ++#define ADM_CI_BURST_8_WORDS BIT(3) ++ ++/* GP CTL */ ++#define ADM_GP_CTL_LP_EN BIT(12) ++#define ADM_GP_CTL_LP_CNT(x) (x << 8) ++ ++/* Command pointer list entry */ ++#define ADM_CPLE_LP BIT(31) ++#define ADM_CPLE_CMD_PTR_LIST BIT(29) ++ ++/* Command list entry */ ++#define ADM_CMD_LC BIT(31) ++#define ADM_CMD_DST_CRCI(n) (((n) & 0xf) << 7) ++#define ADM_CMD_SRC_CRCI(n) (((n) & 0xf) << 3) ++ ++#define ADM_CMD_TYPE_SINGLE 0x0 ++#define ADM_CMD_TYPE_BOX 0x3 ++ ++#define ADM_CRCI_MUX_SEL BIT(4) ++#define ADM_DESC_ALIGN 8 ++#define ADM_MAX_XFER (SZ_64K-1) ++#define ADM_MAX_ROWS (SZ_64K-1) ++#define ADM_MAX_CHANNELS 16 ++ ++struct adm_desc_hw_box { ++ u32 cmd; ++ u32 src_addr; ++ u32 dst_addr; ++ u32 row_len; ++ u32 num_rows; ++ u32 row_offset; ++}; ++ ++struct adm_desc_hw_single { ++ u32 cmd; ++ u32 src_addr; ++ u32 dst_addr; ++ u32 len; ++}; ++ ++struct adm_async_desc { ++ struct virt_dma_desc vd; ++ struct adm_device *adev; ++ ++ size_t length; ++ enum dma_transfer_direction dir; ++ dma_addr_t dma_addr; ++ size_t dma_len; ++ ++ void *cpl; ++ dma_addr_t cp_addr; ++ u32 crci; ++ u32 mux; ++ u32 blk_size; ++}; ++ ++struct adm_chan { ++ struct virt_dma_chan vc; ++ struct adm_device *adev; ++ ++ /* parsed from DT */ ++ u32 id; /* channel id */ ++ ++ struct adm_async_desc *curr_txd; ++ struct dma_slave_config slave; ++ struct list_head node; ++ ++ int error; ++ int initialized; ++}; ++ ++static inline struct adm_chan *to_adm_chan(struct dma_chan *common) ++{ ++ return container_of(common, struct adm_chan, vc.chan); ++} ++ ++struct adm_device { ++ void __iomem *regs; ++ struct device *dev; ++ struct dma_device common; ++ struct device_dma_parameters dma_parms; ++ struct adm_chan *channels; ++ ++ u32 ee; ++ ++ struct clk *core_clk; ++ struct clk *iface_clk; ++ ++ struct reset_control *clk_reset; ++ struct reset_control *c0_reset; ++ struct reset_control *c1_reset; ++ struct reset_control *c2_reset; ++ int irq; ++}; ++ ++/** ++ * adm_free_chan - Frees dma resources associated with the specific channel ++ * ++ * Free all allocated descriptors associated with this channel ++ * ++ */ ++static void adm_free_chan(struct dma_chan *chan) ++{ ++ /* free all queued descriptors */ ++ vchan_free_chan_resources(to_virt_chan(chan)); ++} ++ ++/** ++ * adm_get_blksize - Get block size from burst value ++ * ++ */ ++static int adm_get_blksize(unsigned int burst) ++{ ++ int ret; ++ ++ switch (burst) { ++ case 16: ++ case 32: ++ case 64: ++ case 128: ++ ret = ffs(burst>>4) - 1; ++ break; ++ case 192: ++ ret = 4; ++ break; ++ case 256: ++ ret = 5; ++ break; ++ default: ++ ret = -EINVAL; ++ break; ++ } ++ ++ return ret; ++} ++ ++/** ++ * adm_process_fc_descriptors - Process descriptors for flow controlled xfers ++ * ++ * @achan: ADM channel ++ * @desc: Descriptor memory pointer ++ * @sg: Scatterlist entry ++ * @crci: CRCI value ++ * @burst: Burst size of transaction ++ * @direction: DMA transfer direction ++ */ ++static void *adm_process_fc_descriptors(struct adm_chan *achan, ++ void *desc, struct scatterlist *sg, u32 crci, u32 burst, ++ enum dma_transfer_direction direction) ++{ ++ struct adm_desc_hw_box *box_desc = NULL; ++ struct adm_desc_hw_single *single_desc; ++ u32 remainder = sg_dma_len(sg); ++ u32 rows, row_offset, crci_cmd; ++ u32 mem_addr = sg_dma_address(sg); ++ u32 *incr_addr = &mem_addr; ++ u32 *src, *dst; ++ ++ if (direction == DMA_DEV_TO_MEM) { ++ crci_cmd = ADM_CMD_SRC_CRCI(crci); ++ row_offset = burst; ++ src = &achan->slave.src_addr; ++ dst = &mem_addr; ++ } else { ++ crci_cmd = ADM_CMD_DST_CRCI(crci); ++ row_offset = burst << 16; ++ src = &mem_addr; ++ dst = &achan->slave.dst_addr; ++ } ++ ++ while (remainder >= burst) { ++ box_desc = desc; ++ box_desc->cmd = ADM_CMD_TYPE_BOX | crci_cmd; ++ box_desc->row_offset = row_offset; ++ box_desc->src_addr = *src; ++ box_desc->dst_addr = *dst; ++ ++ rows = remainder / burst; ++ rows = min_t(u32, rows, ADM_MAX_ROWS); ++ box_desc->num_rows = rows << 16 | rows; ++ box_desc->row_len = burst << 16 | burst; ++ ++ *incr_addr += burst * rows; ++ remainder -= burst * rows; ++ desc += sizeof(*box_desc); ++ } ++ ++ /* if leftover bytes, do one single descriptor */ ++ if (remainder) { ++ single_desc = desc; ++ single_desc->cmd = ADM_CMD_TYPE_SINGLE | crci_cmd; ++ single_desc->len = remainder; ++ single_desc->src_addr = *src; ++ single_desc->dst_addr = *dst; ++ desc += sizeof(*single_desc); ++ ++ if (sg_is_last(sg)) ++ single_desc->cmd |= ADM_CMD_LC; ++ } else { ++ if (box_desc && sg_is_last(sg)) ++ box_desc->cmd |= ADM_CMD_LC; ++ } ++ ++ return desc; ++} ++ ++/** ++ * adm_process_non_fc_descriptors - Process descriptors for non-fc xfers ++ * ++ * @achan: ADM channel ++ * @desc: Descriptor memory pointer ++ * @sg: Scatterlist entry ++ * @direction: DMA transfer direction ++ */ ++static void *adm_process_non_fc_descriptors(struct adm_chan *achan, ++ void *desc, struct scatterlist *sg, ++ enum dma_transfer_direction direction) ++{ ++ struct adm_desc_hw_single *single_desc; ++ u32 remainder = sg_dma_len(sg); ++ u32 mem_addr = sg_dma_address(sg); ++ u32 *incr_addr = &mem_addr; ++ u32 *src, *dst; ++ ++ if (direction == DMA_DEV_TO_MEM) { ++ src = &achan->slave.src_addr; ++ dst = &mem_addr; ++ } else { ++ src = &mem_addr; ++ dst = &achan->slave.dst_addr; ++ } ++ ++ do { ++ single_desc = desc; ++ single_desc->cmd = ADM_CMD_TYPE_SINGLE; ++ single_desc->src_addr = *src; ++ single_desc->dst_addr = *dst; ++ single_desc->len = (remainder > ADM_MAX_XFER) ? ++ ADM_MAX_XFER : remainder; ++ ++ remainder -= single_desc->len; ++ *incr_addr += single_desc->len; ++ desc += sizeof(*single_desc); ++ } while (remainder); ++ ++ /* set last command if this is the end of the whole transaction */ ++ if (sg_is_last(sg)) ++ single_desc->cmd |= ADM_CMD_LC; ++ ++ return desc; ++} ++ ++/** ++ * adm_prep_slave_sg - Prep slave sg transaction ++ * ++ * @chan: dma channel ++ * @sgl: scatter gather list ++ * @sg_len: length of sg ++ * @direction: DMA transfer direction ++ * @flags: DMA flags ++ * @context: transfer context (unused) ++ */ ++static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan, ++ struct scatterlist *sgl, unsigned int sg_len, ++ enum dma_transfer_direction direction, unsigned long flags, ++ void *context) ++{ ++ struct adm_chan *achan = to_adm_chan(chan); ++ struct adm_device *adev = achan->adev; ++ struct adm_async_desc *async_desc; ++ struct scatterlist *sg; ++ dma_addr_t cple_addr; ++ u32 i, burst; ++ u32 single_count = 0, box_count = 0, crci = 0; ++ void *desc; ++ u32 *cple; ++ int blk_size = 0; ++ ++ if (!is_slave_direction(direction)) { ++ dev_err(adev->dev, "invalid dma direction\n"); ++ return NULL; ++ } ++ ++ /* ++ * get burst value from slave configuration ++ */ ++ burst = (direction == DMA_MEM_TO_DEV) ? ++ achan->slave.dst_maxburst : ++ achan->slave.src_maxburst; ++ ++ /* if using flow control, validate burst and crci values */ ++ if (achan->slave.device_fc) { ++ ++ blk_size = adm_get_blksize(burst); ++ if (blk_size < 0) { ++ dev_err(adev->dev, "invalid burst value: %d\n", ++ burst); ++ return ERR_PTR(-EINVAL); ++ } ++ ++ crci = achan->slave.slave_id & 0xf; ++ if (!crci || achan->slave.slave_id > 0x1f) { ++ dev_err(adev->dev, "invalid crci value\n"); ++ return ERR_PTR(-EINVAL); ++ } ++ } ++ ++ /* iterate through sgs and compute allocation size of structures */ ++ for_each_sg(sgl, sg, sg_len, i) { ++ if (achan->slave.device_fc) { ++ box_count += DIV_ROUND_UP(sg_dma_len(sg) / burst, ++ ADM_MAX_ROWS); ++ if (sg_dma_len(sg) % burst) ++ single_count++; ++ } else { ++ single_count += DIV_ROUND_UP(sg_dma_len(sg), ++ ADM_MAX_XFER); ++ } ++ } ++ ++ async_desc = kzalloc(sizeof(*async_desc), GFP_ATOMIC); ++ if (!async_desc) ++ return ERR_PTR(-ENOMEM); ++ ++ if (crci) ++ async_desc->mux = achan->slave.slave_id & ADM_CRCI_MUX_SEL ? ++ ADM_CRCI_CTL_MUX_SEL : 0; ++ async_desc->crci = crci; ++ async_desc->blk_size = blk_size; ++ async_desc->dma_len = single_count * sizeof(struct adm_desc_hw_single) + ++ box_count * sizeof(struct adm_desc_hw_box) + ++ sizeof(*cple) + 2 * ADM_DESC_ALIGN; ++ ++ async_desc->cpl = kzalloc(async_desc->dma_len, GFP_ATOMIC); ++ if (!async_desc->cpl) ++ goto free; ++ ++ async_desc->adev = adev; ++ ++ /* both command list entry and descriptors must be 8 byte aligned */ ++ cple = PTR_ALIGN(async_desc->cpl, ADM_DESC_ALIGN); ++ desc = PTR_ALIGN(cple + 1, ADM_DESC_ALIGN); ++ ++ for_each_sg(sgl, sg, sg_len, i) { ++ async_desc->length += sg_dma_len(sg); ++ ++ if (achan->slave.device_fc) ++ desc = adm_process_fc_descriptors(achan, desc, sg, crci, ++ burst, direction); ++ else ++ desc = adm_process_non_fc_descriptors(achan, desc, sg, ++ direction); ++ } ++ ++ async_desc->dma_addr = dma_map_single(adev->dev, async_desc->cpl, ++ async_desc->dma_len, ++ DMA_TO_DEVICE); ++ if (dma_mapping_error(adev->dev, async_desc->dma_addr)) ++ goto free; ++ ++ cple_addr = async_desc->dma_addr + ((void *)cple - async_desc->cpl); ++ ++ /* init cmd list */ ++ dma_sync_single_for_cpu(adev->dev, cple_addr, sizeof(*cple), ++ DMA_TO_DEVICE); ++ *cple = ADM_CPLE_LP; ++ *cple |= (async_desc->dma_addr + ADM_DESC_ALIGN) >> 3; ++ dma_sync_single_for_device(adev->dev, cple_addr, sizeof(*cple), ++ DMA_TO_DEVICE); ++ ++ return vchan_tx_prep(&achan->vc, &async_desc->vd, flags); ++ ++free: ++ kfree(async_desc); ++ return ERR_PTR(-ENOMEM); ++} ++ ++/** ++ * adm_terminate_all - terminate all transactions on a channel ++ * @achan: adm dma channel ++ * ++ * Dequeues and frees all transactions, aborts current transaction ++ * No callbacks are done ++ * ++ */ ++static int adm_terminate_all(struct dma_chan *chan) ++{ ++ struct adm_chan *achan = to_adm_chan(chan); ++ struct adm_device *adev = achan->adev; ++ unsigned long flags; ++ LIST_HEAD(head); ++ ++ spin_lock_irqsave(&achan->vc.lock, flags); ++ vchan_get_all_descriptors(&achan->vc, &head); ++ ++ /* send flush command to terminate current transaction */ ++ writel_relaxed(0x0, ++ adev->regs + ADM_CH_FLUSH_STATE0(achan->id, adev->ee)); ++ ++ spin_unlock_irqrestore(&achan->vc.lock, flags); ++ ++ vchan_dma_desc_free_list(&achan->vc, &head); ++ ++ return 0; ++} ++ ++static int adm_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg) ++{ ++ struct adm_chan *achan = to_adm_chan(chan); ++ unsigned long flag; ++ ++ spin_lock_irqsave(&achan->vc.lock, flag); ++ memcpy(&achan->slave, cfg, sizeof(struct dma_slave_config)); ++ spin_unlock_irqrestore(&achan->vc.lock, flag); ++ ++ return 0; ++} ++ ++/** ++ * adm_start_dma - start next transaction ++ * @achan - ADM dma channel ++ */ ++static void adm_start_dma(struct adm_chan *achan) ++{ ++ struct virt_dma_desc *vd = vchan_next_desc(&achan->vc); ++ struct adm_device *adev = achan->adev; ++ struct adm_async_desc *async_desc; ++ ++ lockdep_assert_held(&achan->vc.lock); ++ ++ if (!vd) ++ return; ++ ++ list_del(&vd->node); ++ ++ /* write next command list out to the CMD FIFO */ ++ async_desc = container_of(vd, struct adm_async_desc, vd); ++ achan->curr_txd = async_desc; ++ ++ /* reset channel error */ ++ achan->error = 0; ++ ++ if (!achan->initialized) { ++ /* enable interrupts */ ++ writel(ADM_CH_CONF_SHADOW_EN | ++ ADM_CH_CONF_PERM_MPU_CONF | ++ ADM_CH_CONF_MPU_DISABLE | ++ ADM_CH_CONF_SEC_DOMAIN(adev->ee), ++ adev->regs + ADM_CH_CONF(achan->id)); ++ ++ writel(ADM_CH_RSLT_CONF_IRQ_EN | ADM_CH_RSLT_CONF_FLUSH_EN, ++ adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee)); ++ ++ achan->initialized = 1; ++ } ++ ++ /* set the crci block size if this transaction requires CRCI */ ++ if (async_desc->crci) { ++ writel(async_desc->mux | async_desc->blk_size, ++ adev->regs + ADM_CRCI_CTL(async_desc->crci, adev->ee)); ++ } ++ ++ /* make sure IRQ enable doesn't get reordered */ ++ wmb(); ++ ++ /* write next command list out to the CMD FIFO */ ++ writel(ALIGN(async_desc->dma_addr, ADM_DESC_ALIGN) >> 3, ++ adev->regs + ADM_CH_CMD_PTR(achan->id, adev->ee)); ++} ++ ++/** ++ * adm_dma_irq - irq handler for ADM controller ++ * @irq: IRQ of interrupt ++ * @data: callback data ++ * ++ * IRQ handler for the bam controller ++ */ ++static irqreturn_t adm_dma_irq(int irq, void *data) ++{ ++ struct adm_device *adev = data; ++ u32 srcs, i; ++ struct adm_async_desc *async_desc; ++ unsigned long flags; ++ ++ srcs = readl_relaxed(adev->regs + ++ ADM_SEC_DOMAIN_IRQ_STATUS(adev->ee)); ++ ++ for (i = 0; i < ADM_MAX_CHANNELS; i++) { ++ struct adm_chan *achan = &adev->channels[i]; ++ u32 status, result; ++ ++ if (srcs & BIT(i)) { ++ status = readl_relaxed(adev->regs + ++ ADM_CH_STATUS_SD(i, adev->ee)); ++ ++ /* if no result present, skip */ ++ if (!(status & ADM_CH_STATUS_VALID)) ++ continue; ++ ++ result = readl_relaxed(adev->regs + ++ ADM_CH_RSLT(i, adev->ee)); ++ ++ /* no valid results, skip */ ++ if (!(result & ADM_CH_RSLT_VALID)) ++ continue; ++ ++ /* flag error if transaction was flushed or failed */ ++ if (result & (ADM_CH_RSLT_ERR | ADM_CH_RSLT_FLUSH)) ++ achan->error = 1; ++ ++ spin_lock_irqsave(&achan->vc.lock, flags); ++ async_desc = achan->curr_txd; ++ ++ achan->curr_txd = NULL; ++ ++ if (async_desc) { ++ vchan_cookie_complete(&async_desc->vd); ++ ++ /* kick off next DMA */ ++ adm_start_dma(achan); ++ } ++ ++ spin_unlock_irqrestore(&achan->vc.lock, flags); ++ } ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++/** ++ * adm_tx_status - returns status of transaction ++ * @chan: dma channel ++ * @cookie: transaction cookie ++ * @txstate: DMA transaction state ++ * ++ * Return status of dma transaction ++ */ ++static enum dma_status adm_tx_status(struct dma_chan *chan, dma_cookie_t cookie, ++ struct dma_tx_state *txstate) ++{ ++ struct adm_chan *achan = to_adm_chan(chan); ++ struct virt_dma_desc *vd; ++ enum dma_status ret; ++ unsigned long flags; ++ size_t residue = 0; ++ ++ ret = dma_cookie_status(chan, cookie, txstate); ++ if (ret == DMA_COMPLETE || !txstate) ++ return ret; ++ ++ spin_lock_irqsave(&achan->vc.lock, flags); ++ ++ vd = vchan_find_desc(&achan->vc, cookie); ++ if (vd) ++ residue = container_of(vd, struct adm_async_desc, vd)->length; ++ ++ spin_unlock_irqrestore(&achan->vc.lock, flags); ++ ++ /* ++ * residue is either the full length if it is in the issued list, or 0 ++ * if it is in progress. We have no reliable way of determining ++ * anything inbetween ++ */ ++ dma_set_residue(txstate, residue); ++ ++ if (achan->error) ++ return DMA_ERROR; ++ ++ return ret; ++} ++ ++/** ++ * adm_issue_pending - starts pending transactions ++ * @chan: dma channel ++ * ++ * Issues all pending transactions and starts DMA ++ */ ++static void adm_issue_pending(struct dma_chan *chan) ++{ ++ struct adm_chan *achan = to_adm_chan(chan); ++ unsigned long flags; ++ ++ spin_lock_irqsave(&achan->vc.lock, flags); ++ ++ if (vchan_issue_pending(&achan->vc) && !achan->curr_txd) ++ adm_start_dma(achan); ++ spin_unlock_irqrestore(&achan->vc.lock, flags); ++} ++ ++/** ++ * adm_dma_free_desc - free descriptor memory ++ * @vd: virtual descriptor ++ * ++ */ ++static void adm_dma_free_desc(struct virt_dma_desc *vd) ++{ ++ struct adm_async_desc *async_desc = container_of(vd, ++ struct adm_async_desc, vd); ++ ++ dma_unmap_single(async_desc->adev->dev, async_desc->dma_addr, ++ async_desc->dma_len, DMA_TO_DEVICE); ++ kfree(async_desc->cpl); ++ kfree(async_desc); ++} ++ ++static void adm_channel_init(struct adm_device *adev, struct adm_chan *achan, ++ u32 index) ++{ ++ achan->id = index; ++ achan->adev = adev; ++ ++ vchan_init(&achan->vc, &adev->common); ++ achan->vc.desc_free = adm_dma_free_desc; ++} ++ ++static int adm_dma_probe(struct platform_device *pdev) ++{ ++ struct adm_device *adev; ++ struct resource *iores; ++ int ret; ++ u32 i; ++ ++ adev = devm_kzalloc(&pdev->dev, sizeof(*adev), GFP_KERNEL); ++ if (!adev) ++ return -ENOMEM; ++ ++ adev->dev = &pdev->dev; ++ ++ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ adev->regs = devm_ioremap_resource(&pdev->dev, iores); ++ if (IS_ERR(adev->regs)) ++ return PTR_ERR(adev->regs); ++ ++ adev->irq = platform_get_irq(pdev, 0); ++ if (adev->irq < 0) ++ return adev->irq; ++ ++ ret = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &adev->ee); ++ if (ret) { ++ dev_err(adev->dev, "Execution environment unspecified\n"); ++ return ret; ++ } ++ ++ adev->core_clk = devm_clk_get(adev->dev, "core"); ++ if (IS_ERR(adev->core_clk)) ++ return PTR_ERR(adev->core_clk); ++ ++ ret = clk_prepare_enable(adev->core_clk); ++ if (ret) { ++ dev_err(adev->dev, "failed to prepare/enable core clock\n"); ++ return ret; ++ } ++ ++ adev->iface_clk = devm_clk_get(adev->dev, "iface"); ++ if (IS_ERR(adev->iface_clk)) { ++ ret = PTR_ERR(adev->iface_clk); ++ goto err_disable_core_clk; ++ } ++ ++ ret = clk_prepare_enable(adev->iface_clk); ++ if (ret) { ++ dev_err(adev->dev, "failed to prepare/enable iface clock\n"); ++ goto err_disable_core_clk; ++ } ++ ++ adev->clk_reset = devm_reset_control_get(&pdev->dev, "clk"); ++ if (IS_ERR(adev->clk_reset)) { ++ dev_err(adev->dev, "failed to get ADM0 reset\n"); ++ ret = PTR_ERR(adev->clk_reset); ++ goto err_disable_clks; ++ } ++ ++ adev->c0_reset = devm_reset_control_get(&pdev->dev, "c0"); ++ if (IS_ERR(adev->c0_reset)) { ++ dev_err(adev->dev, "failed to get ADM0 C0 reset\n"); ++ ret = PTR_ERR(adev->c0_reset); ++ goto err_disable_clks; ++ } ++ ++ adev->c1_reset = devm_reset_control_get(&pdev->dev, "c1"); ++ if (IS_ERR(adev->c1_reset)) { ++ dev_err(adev->dev, "failed to get ADM0 C1 reset\n"); ++ ret = PTR_ERR(adev->c1_reset); ++ goto err_disable_clks; ++ } ++ ++ adev->c2_reset = devm_reset_control_get(&pdev->dev, "c2"); ++ if (IS_ERR(adev->c2_reset)) { ++ dev_err(adev->dev, "failed to get ADM0 C2 reset\n"); ++ ret = PTR_ERR(adev->c2_reset); ++ goto err_disable_clks; ++ } ++ ++ reset_control_assert(adev->clk_reset); ++ reset_control_assert(adev->c0_reset); ++ reset_control_assert(adev->c1_reset); ++ reset_control_assert(adev->c2_reset); ++ ++ reset_control_deassert(adev->clk_reset); ++ reset_control_deassert(adev->c0_reset); ++ reset_control_deassert(adev->c1_reset); ++ reset_control_deassert(adev->c2_reset); ++ ++ adev->channels = devm_kcalloc(adev->dev, ADM_MAX_CHANNELS, ++ sizeof(*adev->channels), GFP_KERNEL); ++ ++ if (!adev->channels) { ++ ret = -ENOMEM; ++ goto err_disable_clks; ++ } ++ ++ /* allocate and initialize channels */ ++ INIT_LIST_HEAD(&adev->common.channels); ++ ++ for (i = 0; i < ADM_MAX_CHANNELS; i++) ++ adm_channel_init(adev, &adev->channels[i], i); ++ ++ /* reset CRCIs */ ++ for (i = 0; i < 16; i++) ++ writel(ADM_CRCI_CTL_RST, adev->regs + ++ ADM_CRCI_CTL(i, adev->ee)); ++ ++ /* configure client interfaces */ ++ writel(ADM_CI_RANGE_START(0x40) | ADM_CI_RANGE_END(0xb0) | ++ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(0)); ++ writel(ADM_CI_RANGE_START(0x2a) | ADM_CI_RANGE_END(0x2c) | ++ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(1)); ++ writel(ADM_CI_RANGE_START(0x12) | ADM_CI_RANGE_END(0x28) | ++ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(2)); ++ writel(ADM_GP_CTL_LP_EN | ADM_GP_CTL_LP_CNT(0xf), ++ adev->regs + ADM_GP_CTL); ++ ++ ret = devm_request_irq(adev->dev, adev->irq, adm_dma_irq, ++ 0, "adm_dma", adev); ++ if (ret) ++ goto err_disable_clks; ++ ++ platform_set_drvdata(pdev, adev); ++ ++ adev->common.dev = adev->dev; ++ adev->common.dev->dma_parms = &adev->dma_parms; ++ ++ /* set capabilities */ ++ dma_cap_zero(adev->common.cap_mask); ++ dma_cap_set(DMA_SLAVE, adev->common.cap_mask); ++ dma_cap_set(DMA_PRIVATE, adev->common.cap_mask); ++ ++ /* initialize dmaengine apis */ ++ adev->common.directions = BIT(DMA_DEV_TO_MEM | DMA_MEM_TO_DEV); ++ adev->common.residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR; ++ adev->common.src_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ adev->common.dst_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES; ++ adev->common.device_free_chan_resources = adm_free_chan; ++ adev->common.device_prep_slave_sg = adm_prep_slave_sg; ++ adev->common.device_issue_pending = adm_issue_pending; ++ adev->common.device_tx_status = adm_tx_status; ++ adev->common.device_terminate_all = adm_terminate_all; ++ adev->common.device_config = adm_slave_config; ++ ++ ret = dma_async_device_register(&adev->common); ++ if (ret) { ++ dev_err(adev->dev, "failed to register dma async device\n"); ++ goto err_disable_clks; ++ } ++ ++ ret = of_dma_controller_register(pdev->dev.of_node, ++ of_dma_xlate_by_chan_id, ++ &adev->common); ++ if (ret) ++ goto err_unregister_dma; ++ ++ return 0; ++ ++err_unregister_dma: ++ dma_async_device_unregister(&adev->common); ++err_disable_clks: ++ clk_disable_unprepare(adev->iface_clk); ++err_disable_core_clk: ++ clk_disable_unprepare(adev->core_clk); ++ ++ return ret; ++} ++ ++static int adm_dma_remove(struct platform_device *pdev) ++{ ++ struct adm_device *adev = platform_get_drvdata(pdev); ++ struct adm_chan *achan; ++ u32 i; ++ ++ of_dma_controller_free(pdev->dev.of_node); ++ dma_async_device_unregister(&adev->common); ++ ++ for (i = 0; i < ADM_MAX_CHANNELS; i++) { ++ achan = &adev->channels[i]; ++ ++ /* mask IRQs for this channel/EE pair */ ++ writel(0, adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee)); ++ ++ adm_terminate_all(&adev->channels[i].vc.chan); ++ } ++ ++ devm_free_irq(adev->dev, adev->irq, adev); ++ ++ clk_disable_unprepare(adev->core_clk); ++ clk_disable_unprepare(adev->iface_clk); ++ ++ return 0; ++} ++ ++static const struct of_device_id adm_of_match[] = { ++ { .compatible = "qcom,adm", }, ++ {} ++}; ++MODULE_DEVICE_TABLE(of, adm_of_match); ++ ++static struct platform_driver adm_dma_driver = { ++ .probe = adm_dma_probe, ++ .remove = adm_dma_remove, ++ .driver = { ++ .name = "adm-dma-engine", ++ .of_match_table = adm_of_match, ++ }, ++}; ++ ++module_platform_driver(adm_dma_driver); ++ ++MODULE_AUTHOR("Andy Gross "); ++MODULE_DESCRIPTION("QCOM ADM DMA engine driver"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ipq806x/patches-4.14/0030-clk-Disable-i2c-device-on-gsbi4.patch b/target/linux/ipq806x/patches-4.14/0030-clk-Disable-i2c-device-on-gsbi4.patch new file mode 100644 index 0000000000..52b60e1341 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0030-clk-Disable-i2c-device-on-gsbi4.patch @@ -0,0 +1,40 @@ +From 0c974b87829e007dc4fae94e20d488204e20e662 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 9 Mar 2017 08:16:10 +0100 +Subject: [PATCH 30/69] clk: Disable i2c device on gsbi4 + +This patch was not annotated and comes from the v4.4 tree. + +Signed-off-by: John Crispin +--- + drivers/clk/qcom/gcc-ipq806x.c | 5 +++-- + 1 file changed, 3 insertions(+), 2 deletions(-) + +--- a/drivers/clk/qcom/gcc-ipq806x.c ++++ b/drivers/clk/qcom/gcc-ipq806x.c +@@ -294,7 +294,7 @@ static struct clk_rcg gsbi1_uart_src = { + .parent_names = gcc_pxo_pll8, + .num_parents = 2, + .ops = &clk_rcg_ops, +- .flags = CLK_SET_PARENT_GATE, ++ .flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED, + }, + }, + }; +@@ -312,7 +312,7 @@ static struct clk_branch gsbi1_uart_clk + }, + .num_parents = 1, + .ops = &clk_branch_ops, +- .flags = CLK_SET_RATE_PARENT, ++ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + }, + }, + }; +@@ -890,6 +890,7 @@ static struct clk_branch gsbi1_h_clk = { + .hw.init = &(struct clk_init_data){ + .name = "gsbi1_h_clk", + .ops = &clk_branch_ops, ++ .flags = CLK_IGNORE_UNUSED, + }, + }, + }; diff --git a/target/linux/ipq806x/patches-4.14/0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch b/target/linux/ipq806x/patches-4.14/0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch new file mode 100644 index 0000000000..a80326906d --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch @@ -0,0 +1,282 @@ +From d8eeb4de90e968ba32d956728c866f20752cf2c3 Mon Sep 17 00:00:00 2001 +From: Mathieu Olivari +Date: Thu, 9 Mar 2017 08:18:08 +0100 +Subject: [PATCH 31/69] mtd: add SMEM parser for QCOM platforms + +On QCOM platforms using MTD devices storage (such as IPQ806x), SMEM is +used to store partition layout. This new parser can now be used to read +SMEM and use it to register an MTD layout according to its content. + +Signed-off-by: Mathieu Olivari +Signed-off-by: Ram Chandra Jangir +--- + drivers/mtd/Kconfig | 7 ++ + drivers/mtd/Makefile | 1 + + drivers/mtd/qcom_smem_part.c | 228 +++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 236 insertions(+) + create mode 100644 drivers/mtd/qcom_smem_part.c + +--- a/drivers/mtd/Kconfig ++++ b/drivers/mtd/Kconfig +@@ -194,6 +194,13 @@ config MTD_MYLOADER_PARTS + You will still need the parsing functions to be called by the driver + for your particular device. It won't happen automatically. + ++config MTD_QCOM_SMEM_PARTS ++ tristate "QCOM SMEM partitioning support" ++ depends on QCOM_SMEM ++ help ++ This provides partitions parser for QCOM devices using SMEM ++ such as IPQ806x. ++ + comment "User Modules And Translation Layers" + + # +--- /dev/null ++++ b/drivers/mtd/qcom_smem_part.c +@@ -0,0 +1,235 @@ ++/* ++ * Copyright (c) 2015, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include ++ ++/* Processor/host identifier for the application processor */ ++#define SMEM_HOST_APPS 0 ++ ++/* SMEM items index */ ++#define SMEM_AARM_PARTITION_TABLE 9 ++#define SMEM_BOOT_FLASH_TYPE 421 ++#define SMEM_BOOT_FLASH_BLOCK_SIZE 424 ++ ++/* SMEM Flash types */ ++#define SMEM_FLASH_NAND 2 ++#define SMEM_FLASH_SPI 6 ++ ++#define SMEM_PART_NAME_SZ 16 ++#define SMEM_PARTS_MAX 32 ++ ++struct smem_partition { ++ char name[SMEM_PART_NAME_SZ]; ++ __le32 start; ++ __le32 size; ++ __le32 attr; ++}; ++ ++struct smem_partition_table { ++ u8 magic[8]; ++ __le32 version; ++ __le32 len; ++ struct smem_partition parts[SMEM_PARTS_MAX]; ++}; ++ ++/* SMEM Magic values in partition table */ ++static const u8 SMEM_PTABLE_MAGIC[] = { ++ 0xaa, 0x73, 0xee, 0x55, ++ 0xdb, 0xbd, 0x5e, 0xe3, ++}; ++ ++static int qcom_smem_get_flash_blksz(u64 **smem_blksz) ++{ ++ size_t size; ++ ++ *smem_blksz = qcom_smem_get(SMEM_HOST_APPS, SMEM_BOOT_FLASH_BLOCK_SIZE, ++ &size); ++ ++ if (IS_ERR(*smem_blksz)) { ++ pr_err("Unable to read flash blksz from SMEM\n"); ++ return -ENOENT; ++ } ++ ++ if (size != sizeof(**smem_blksz)) { ++ pr_err("Invalid flash blksz size in SMEM\n"); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static int qcom_smem_get_flash_type(u64 **smem_flash_type) ++{ ++ size_t size; ++ ++ *smem_flash_type = qcom_smem_get(SMEM_HOST_APPS, SMEM_BOOT_FLASH_TYPE, ++ &size); ++ ++ if (IS_ERR(*smem_flash_type)) { ++ pr_err("Unable to read flash type from SMEM\n"); ++ return -ENOENT; ++ } ++ ++ if (size != sizeof(**smem_flash_type)) { ++ pr_err("Invalid flash type size in SMEM\n"); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static int qcom_smem_get_flash_partitions(struct smem_partition_table **pparts) ++{ ++ size_t size; ++ ++ *pparts = qcom_smem_get(SMEM_HOST_APPS, SMEM_AARM_PARTITION_TABLE, ++ &size); ++ ++ if (IS_ERR(*pparts)) { ++ pr_err("Unable to read partition table from SMEM\n"); ++ return -ENOENT; ++ } ++ ++ return 0; ++} ++ ++static int of_dev_node_match(struct device *dev, void *data) ++{ ++ return dev->of_node == data; ++} ++ ++static bool is_spi_device(struct device_node *np) ++{ ++ struct device *dev; ++ ++ dev = bus_find_device(&spi_bus_type, NULL, np, of_dev_node_match); ++ if (!dev) ++ return false; ++ ++ put_device(dev); ++ return true; ++} ++ ++static int parse_qcom_smem_partitions(struct mtd_info *master, ++ const struct mtd_partition **pparts, ++ struct mtd_part_parser_data *data) ++{ ++ struct smem_partition_table *smem_parts; ++ u64 *smem_flash_type, *smem_blksz; ++ struct mtd_partition *mtd_parts; ++ struct device_node *of_node = master->dev.of_node; ++ int i, ret; ++ ++ /* ++ * SMEM will only store the partition table of the boot device. ++ * If this is not the boot device, do not return any partition. ++ */ ++ ret = qcom_smem_get_flash_type(&smem_flash_type); ++ if (ret < 0) ++ return ret; ++ ++ if ((*smem_flash_type == SMEM_FLASH_NAND && !mtd_type_is_nand(master)) ++ || (*smem_flash_type == SMEM_FLASH_SPI && !is_spi_device(of_node))) ++ return 0; ++ ++ /* ++ * Just for sanity purpose, make sure the block size in SMEM matches the ++ * block size of the MTD device ++ */ ++ ret = qcom_smem_get_flash_blksz(&smem_blksz); ++ if (ret < 0) ++ return ret; ++ ++ if (*smem_blksz != master->erasesize) { ++ pr_err("SMEM block size differs from MTD block size\n"); ++ return -EINVAL; ++ } ++ ++ /* Get partition pointer from SMEM */ ++ ret = qcom_smem_get_flash_partitions(&smem_parts); ++ if (ret < 0) ++ return ret; ++ ++ if (memcmp(SMEM_PTABLE_MAGIC, smem_parts->magic, ++ sizeof(SMEM_PTABLE_MAGIC))) { ++ pr_err("SMEM partition magic invalid\n"); ++ return -EINVAL; ++ } ++ ++ /* Allocate and populate the mtd structures */ ++ mtd_parts = kcalloc(le32_to_cpu(smem_parts->len), sizeof(*mtd_parts), ++ GFP_KERNEL); ++ if (!mtd_parts) ++ return -ENOMEM; ++ ++ for (i = 0; i < smem_parts->len; i++) { ++ struct smem_partition *s_part = &smem_parts->parts[i]; ++ struct mtd_partition *m_part = &mtd_parts[i]; ++ ++ m_part->name = s_part->name; ++ m_part->size = le32_to_cpu(s_part->size) * (*smem_blksz); ++ m_part->offset = le32_to_cpu(s_part->start) * (*smem_blksz); ++ ++ /* ++ * The last SMEM partition may have its size marked as ++ * something like 0xffffffff, which means "until the end of the ++ * flash device". In this case, truncate it. ++ */ ++ if (m_part->offset + m_part->size > master->size) ++ m_part->size = master->size - m_part->offset; ++ } ++ ++ *pparts = mtd_parts; ++ ++ return smem_parts->len; ++} ++ ++static const struct of_device_id qcom_smem_of_match_table[] = { ++ { .compatible = "qcom,smem" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, qcom_smem_of_match_table); ++ ++static struct mtd_part_parser qcom_smem_parser = { ++ .owner = THIS_MODULE, ++ .parse_fn = parse_qcom_smem_partitions, ++ .name = "qcom-smem", ++ .of_match_table = qcom_smem_of_match_table, ++}; ++ ++static int __init qcom_smem_parser_init(void) ++{ ++ register_mtd_parser(&qcom_smem_parser); ++ return 0; ++} ++ ++static void __exit qcom_smem_parser_exit(void) ++{ ++ deregister_mtd_parser(&qcom_smem_parser); ++} ++ ++module_init(qcom_smem_parser_init); ++module_exit(qcom_smem_parser_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Mathieu Olivari "); ++MODULE_DESCRIPTION("Parsing code for SMEM based partition tables"); +--- a/drivers/mtd/Makefile ++++ b/drivers/mtd/Makefile +@@ -17,6 +17,7 @@ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o + obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o + obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o + obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o ++obj-$(CONFIG_MTD_QCOM_SMEM_PARTS) += qcom_smem_part.o + obj-y += parsers/ + + # 'Users' - code which presents functionality to userspace. diff --git a/target/linux/ipq806x/patches-4.14/0032-phy-add-qcom-dwc3-phy.patch b/target/linux/ipq806x/patches-4.14/0032-phy-add-qcom-dwc3-phy.patch new file mode 100644 index 0000000000..f392a71abb --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0032-phy-add-qcom-dwc3-phy.patch @@ -0,0 +1,616 @@ +From b9004f4fd23e4c614d71c972f3a9311665480e29 Mon Sep 17 00:00:00 2001 +From: Andy Gross +Date: Thu, 9 Mar 2017 08:19:18 +0100 +Subject: [PATCH 32/69] phy: add qcom dwc3 phy + +Signed-off-by: Andy Gross +--- + drivers/phy/Kconfig | 12 + + drivers/phy/Makefile | 1 + + drivers/phy/phy-qcom-dwc3.c | 575 ++++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 588 insertions(+) + create mode 100644 drivers/phy/phy-qcom-dwc3.c + +--- a/drivers/phy/qualcomm/Kconfig ++++ b/drivers/phy/qualcomm/Kconfig +@@ -56,3 +56,15 @@ + select GENERIC_PHY + help + Support for the USB HSIC ULPI compliant PHY on QCOM chipsets. ++ ++config PHY_QCOM_DWC3 ++ tristate "QCOM DWC3 USB PHY support" ++ depends on ARCH_QCOM ++ depends on HAS_IOMEM ++ depends on OF ++ select GENERIC_PHY ++ help ++ This option enables support for the Synopsis PHYs present inside the ++ Qualcomm USB3.0 DWC3 controller. This driver supports both HS and SS ++ PHY controllers. ++ +--- a/drivers/phy/qualcomm/Makefile ++++ b/drivers/phy/qualcomm/Makefile +@@ -8,3 +8,4 @@ + obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o + obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o + obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o ++obj-$(CONFIG_PHY_QCOM_DWC3) += phy-qcom-dwc3.o +--- /dev/null ++++ b/drivers/phy/qualcomm/phy-qcom-dwc3.c +@@ -0,0 +1,575 @@ ++/* Copyright (c) 2014-2015, Code Aurora Forum. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++* This program is distributed in the hope that it will be useful, ++* but WITHOUT ANY WARRANTY; without even the implied warranty of ++* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++* GNU General Public License for more details. ++*/ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/** ++ * USB QSCRATCH Hardware registers ++ */ ++#define QSCRATCH_GENERAL_CFG (0x08) ++#define HSUSB_PHY_CTRL_REG (0x10) ++ ++/* PHY_CTRL_REG */ ++#define HSUSB_CTRL_DMSEHV_CLAMP BIT(24) ++#define HSUSB_CTRL_USB2_SUSPEND BIT(23) ++#define HSUSB_CTRL_UTMI_CLK_EN BIT(21) ++#define HSUSB_CTRL_UTMI_OTG_VBUS_VALID BIT(20) ++#define HSUSB_CTRL_USE_CLKCORE BIT(18) ++#define HSUSB_CTRL_DPSEHV_CLAMP BIT(17) ++#define HSUSB_CTRL_COMMONONN BIT(11) ++#define HSUSB_CTRL_ID_HV_CLAMP BIT(9) ++#define HSUSB_CTRL_OTGSESSVLD_CLAMP BIT(8) ++#define HSUSB_CTRL_CLAMP_EN BIT(7) ++#define HSUSB_CTRL_RETENABLEN BIT(1) ++#define HSUSB_CTRL_POR BIT(0) ++ ++/* QSCRATCH_GENERAL_CFG */ ++#define HSUSB_GCFG_XHCI_REV BIT(2) ++ ++/** ++ * USB QSCRATCH Hardware registers ++ */ ++#define SSUSB_PHY_CTRL_REG (0x00) ++#define SSUSB_PHY_PARAM_CTRL_1 (0x04) ++#define SSUSB_PHY_PARAM_CTRL_2 (0x08) ++#define CR_PROTOCOL_DATA_IN_REG (0x0c) ++#define CR_PROTOCOL_DATA_OUT_REG (0x10) ++#define CR_PROTOCOL_CAP_ADDR_REG (0x14) ++#define CR_PROTOCOL_CAP_DATA_REG (0x18) ++#define CR_PROTOCOL_READ_REG (0x1c) ++#define CR_PROTOCOL_WRITE_REG (0x20) ++ ++/* PHY_CTRL_REG */ ++#define SSUSB_CTRL_REF_USE_PAD BIT(28) ++#define SSUSB_CTRL_TEST_POWERDOWN BIT(27) ++#define SSUSB_CTRL_LANE0_PWR_PRESENT BIT(24) ++#define SSUSB_CTRL_SS_PHY_EN BIT(8) ++#define SSUSB_CTRL_SS_PHY_RESET BIT(7) ++ ++/* SSPHY control registers */ ++#define SSPHY_CTRL_RX_OVRD_IN_HI(lane) (0x1006 + 0x100 * lane) ++#define SSPHY_CTRL_TX_OVRD_DRV_LO(lane) (0x1002 + 0x100 * lane) ++ ++/* SSPHY SoC version specific values */ ++#define SSPHY_RX_EQ_VALUE 4 /* Override value for rx_eq */ ++#define SSPHY_TX_DEEMPH_3_5DB 23 /* Override value for transmit ++ preemphasis */ ++#define SSPHY_MPLL_VALUE 0 /* Override value for mpll */ ++ ++/* QSCRATCH PHY_PARAM_CTRL1 fields */ ++#define PHY_PARAM_CTRL1_TX_FULL_SWING_MASK 0x07f00000u ++#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK 0x000fc000u ++#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK 0x00003f00u ++#define PHY_PARAM_CTRL1_LOS_BIAS_MASK 0x000000f8u ++ ++#define PHY_PARAM_CTRL1_MASK \ ++ (PHY_PARAM_CTRL1_TX_FULL_SWING_MASK | \ ++ PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK | \ ++ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK | \ ++ PHY_PARAM_CTRL1_LOS_BIAS_MASK) ++ ++#define PHY_PARAM_CTRL1_TX_FULL_SWING(x) \ ++ (((x) << 20) & PHY_PARAM_CTRL1_TX_FULL_SWING_MASK) ++#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB(x) \ ++ (((x) << 14) & PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK) ++#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(x) \ ++ (((x) << 8) & PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK) ++#define PHY_PARAM_CTRL1_LOS_BIAS(x) \ ++ (((x) << 3) & PHY_PARAM_CTRL1_LOS_BIAS_MASK) ++ ++/* RX OVRD IN HI bits */ ++#define RX_OVRD_IN_HI_RX_RESET_OVRD BIT(13) ++#define RX_OVRD_IN_HI_RX_RX_RESET BIT(12) ++#define RX_OVRD_IN_HI_RX_EQ_OVRD BIT(11) ++#define RX_OVRD_IN_HI_RX_EQ_MASK 0x0700 ++#define RX_OVRD_IN_HI_RX_EQ_SHIFT 8 ++#define RX_OVRD_IN_HI_RX_EQ_EN_OVRD BIT(7) ++#define RX_OVRD_IN_HI_RX_EQ_EN BIT(6) ++#define RX_OVRD_IN_HI_RX_LOS_FILTER_OVRD BIT(5) ++#define RX_OVRD_IN_HI_RX_LOS_FILTER_MASK 0x0018 ++#define RX_OVRD_IN_HI_RX_RATE_OVRD BIT(2) ++#define RX_OVRD_IN_HI_RX_RATE_MASK 0x0003 ++ ++/* TX OVRD DRV LO register bits */ ++#define TX_OVRD_DRV_LO_AMPLITUDE_MASK 0x007F ++#define TX_OVRD_DRV_LO_PREEMPH_MASK 0x3F80 ++#define TX_OVRD_DRV_LO_PREEMPH_SHIFT 7 ++#define TX_OVRD_DRV_LO_EN BIT(14) ++ ++/* SS CAP register bits */ ++#define SS_CR_CAP_ADDR_REG BIT(0) ++#define SS_CR_CAP_DATA_REG BIT(0) ++#define SS_CR_READ_REG BIT(0) ++#define SS_CR_WRITE_REG BIT(0) ++ ++struct qcom_dwc3_usb_phy { ++ void __iomem *base; ++ struct device *dev; ++ struct clk *xo_clk; ++ struct clk *ref_clk; ++ u32 rx_eq; ++ u32 tx_deamp_3_5db; ++ u32 mpll; ++}; ++ ++struct qcom_dwc3_phy_drvdata { ++ struct phy_ops ops; ++ u32 clk_rate; ++}; ++ ++/** ++ * Write register and read back masked value to confirm it is written ++ * ++ * @base - QCOM DWC3 PHY base virtual address. ++ * @offset - register offset. ++ * @mask - register bitmask specifying what should be updated ++ * @val - value to write. ++ */ ++static inline void qcom_dwc3_phy_write_readback( ++ struct qcom_dwc3_usb_phy *phy_dwc3, u32 offset, ++ const u32 mask, u32 val) ++{ ++ u32 write_val, tmp = readl(phy_dwc3->base + offset); ++ ++ tmp &= ~mask; /* retain other bits */ ++ write_val = tmp | val; ++ ++ writel(write_val, phy_dwc3->base + offset); ++ ++ /* Read back to see if val was written */ ++ tmp = readl(phy_dwc3->base + offset); ++ tmp &= mask; /* clear other bits */ ++ ++ if (tmp != val) ++ dev_err(phy_dwc3->dev, "write: %x to QSCRATCH: %x FAILED\n", ++ val, offset); ++} ++ ++static int wait_for_latch(void __iomem *addr) ++{ ++ u32 retry = 10; ++ ++ while (true) { ++ if (!readl(addr)) ++ break; ++ ++ if (--retry == 0) ++ return -ETIMEDOUT; ++ ++ usleep_range(10, 20); ++ } ++ ++ return 0; ++} ++ ++/** ++ * Write SSPHY register ++ * ++ * @base - QCOM DWC3 PHY base virtual address. ++ * @addr - SSPHY address to write. ++ * @val - value to write. ++ */ ++static int qcom_dwc3_ss_write_phycreg(struct qcom_dwc3_usb_phy *phy_dwc3, ++ u32 addr, u32 val) ++{ ++ int ret; ++ ++ writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG); ++ writel(SS_CR_CAP_ADDR_REG, phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG); ++ ++ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG); ++ if (ret) ++ goto err_wait; ++ ++ writel(val, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG); ++ writel(SS_CR_CAP_DATA_REG, phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG); ++ ++ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG); ++ if (ret) ++ goto err_wait; ++ ++ writel(SS_CR_WRITE_REG, phy_dwc3->base + CR_PROTOCOL_WRITE_REG); ++ ++ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_WRITE_REG); ++ ++err_wait: ++ if (ret) ++ dev_err(phy_dwc3->dev, "timeout waiting for latch\n"); ++ return ret; ++} ++ ++/** ++ * Read SSPHY register. ++ * ++ * @base - QCOM DWC3 PHY base virtual address. ++ * @addr - SSPHY address to read. ++ */ ++static int qcom_dwc3_ss_read_phycreg(void __iomem *base, u32 addr, u32 *val) ++{ ++ int ret; ++ ++ writel(addr, base + CR_PROTOCOL_DATA_IN_REG); ++ writel(SS_CR_CAP_ADDR_REG, base + CR_PROTOCOL_CAP_ADDR_REG); ++ ++ ret = wait_for_latch(base + CR_PROTOCOL_CAP_ADDR_REG); ++ if (ret) ++ goto err_wait; ++ ++ /* ++ * Due to hardware bug, first read of SSPHY register might be ++ * incorrect. Hence as workaround, SW should perform SSPHY register ++ * read twice, but use only second read and ignore first read. ++ */ ++ writel(SS_CR_READ_REG, base + CR_PROTOCOL_READ_REG); ++ ++ ret = wait_for_latch(base + CR_PROTOCOL_READ_REG); ++ if (ret) ++ goto err_wait; ++ ++ /* throwaway read */ ++ readl(base + CR_PROTOCOL_DATA_OUT_REG); ++ ++ writel(SS_CR_READ_REG, base + CR_PROTOCOL_READ_REG); ++ ++ ret = wait_for_latch(base + CR_PROTOCOL_READ_REG); ++ if (ret) ++ goto err_wait; ++ ++ *val = readl(base + CR_PROTOCOL_DATA_OUT_REG); ++ ++err_wait: ++ return ret; ++} ++ ++static int qcom_dwc3_hs_phy_init(struct phy *phy) ++{ ++ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy); ++ int ret; ++ u32 val; ++ ++ ret = clk_prepare_enable(phy_dwc3->xo_clk); ++ if (ret) ++ return ret; ++ ++ ret = clk_prepare_enable(phy_dwc3->ref_clk); ++ if (ret) { ++ clk_disable_unprepare(phy_dwc3->xo_clk); ++ return ret; ++ } ++ ++ /* ++ * HSPHY Initialization: Enable UTMI clock, select 19.2MHz fsel ++ * enable clamping, and disable RETENTION (power-on default is ENABLED) ++ */ ++ val = HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_DMSEHV_CLAMP | ++ HSUSB_CTRL_RETENABLEN | HSUSB_CTRL_COMMONONN | ++ HSUSB_CTRL_OTGSESSVLD_CLAMP | HSUSB_CTRL_ID_HV_CLAMP | ++ HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_UTMI_OTG_VBUS_VALID | ++ HSUSB_CTRL_UTMI_CLK_EN | HSUSB_CTRL_CLAMP_EN | 0x70; ++ ++ /* use core clock if external reference is not present */ ++ if (!phy_dwc3->xo_clk) ++ val |= HSUSB_CTRL_USE_CLKCORE; ++ ++ writel(val, phy_dwc3->base + HSUSB_PHY_CTRL_REG); ++ usleep_range(2000, 2200); ++ ++ /* Disable (bypass) VBUS and ID filters */ ++ writel(HSUSB_GCFG_XHCI_REV, phy_dwc3->base + QSCRATCH_GENERAL_CFG); ++ ++ return 0; ++} ++ ++static int qcom_dwc3_hs_phy_exit(struct phy *phy) ++{ ++ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy); ++ ++ clk_disable_unprepare(phy_dwc3->ref_clk); ++ clk_disable_unprepare(phy_dwc3->xo_clk); ++ ++ return 0; ++} ++ ++static int qcom_dwc3_ss_phy_init(struct phy *phy) ++{ ++ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy); ++ int ret; ++ u32 data = 0; ++ ++ ret = clk_prepare_enable(phy_dwc3->xo_clk); ++ if (ret) ++ return ret; ++ ++ ret = clk_prepare_enable(phy_dwc3->ref_clk); ++ if (ret) { ++ clk_disable_unprepare(phy_dwc3->xo_clk); ++ return ret; ++ } ++ ++ /* reset phy */ ++ data = readl(phy_dwc3->base + SSUSB_PHY_CTRL_REG); ++ writel(data | SSUSB_CTRL_SS_PHY_RESET, ++ phy_dwc3->base + SSUSB_PHY_CTRL_REG); ++ usleep_range(2000, 2200); ++ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG); ++ ++ /* clear REF_PAD if we don't have XO clk */ ++ if (!phy_dwc3->xo_clk) ++ data &= ~SSUSB_CTRL_REF_USE_PAD; ++ else ++ data |= SSUSB_CTRL_REF_USE_PAD; ++ ++ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG); ++ ++ /* wait for ref clk to become stable, this can take up to 30ms */ ++ msleep(30); ++ ++ data |= SSUSB_CTRL_SS_PHY_EN | SSUSB_CTRL_LANE0_PWR_PRESENT; ++ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG); ++ ++ /* ++ * WORKAROUND: There is SSPHY suspend bug due to which USB enumerates ++ * in HS mode instead of SS mode. Workaround it by asserting ++ * LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus mode ++ */ ++ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, 0x102D, &data); ++ if (ret) ++ goto err_phy_trans; ++ ++ data |= (1 << 7); ++ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x102D, data); ++ if (ret) ++ goto err_phy_trans; ++ ++ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, 0x1010, &data); ++ if (ret) ++ goto err_phy_trans; ++ ++ data &= ~0xff0; ++ data |= 0x20; ++ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x1010, data); ++ if (ret) ++ goto err_phy_trans; ++ ++ /* ++ * Fix RX Equalization setting as follows ++ * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0 ++ * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1 ++ * LANE0.RX_OVRD_IN_HI.RX_EQ set based on SoC version ++ * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1 ++ */ ++ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, ++ SSPHY_CTRL_RX_OVRD_IN_HI(0), &data); ++ if (ret) ++ goto err_phy_trans; ++ ++ data &= ~RX_OVRD_IN_HI_RX_EQ_EN; ++ data |= RX_OVRD_IN_HI_RX_EQ_EN_OVRD; ++ data &= ~RX_OVRD_IN_HI_RX_EQ_MASK; ++ data |= phy_dwc3->rx_eq << RX_OVRD_IN_HI_RX_EQ_SHIFT; ++ data |= RX_OVRD_IN_HI_RX_EQ_OVRD; ++ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, ++ SSPHY_CTRL_RX_OVRD_IN_HI(0), data); ++ if (ret) ++ goto err_phy_trans; ++ ++ /* ++ * Set EQ and TX launch amplitudes as follows ++ * LANE0.TX_OVRD_DRV_LO.PREEMPH set based on SoC version ++ * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 110 ++ * LANE0.TX_OVRD_DRV_LO.EN set to 1. ++ */ ++ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, ++ SSPHY_CTRL_TX_OVRD_DRV_LO(0), &data); ++ if (ret) ++ goto err_phy_trans; ++ ++ data &= ~TX_OVRD_DRV_LO_PREEMPH_MASK; ++ data |= phy_dwc3->tx_deamp_3_5db << TX_OVRD_DRV_LO_PREEMPH_SHIFT; ++ data &= ~TX_OVRD_DRV_LO_AMPLITUDE_MASK; ++ data |= 0x6E; ++ data |= TX_OVRD_DRV_LO_EN; ++ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, ++ SSPHY_CTRL_TX_OVRD_DRV_LO(0), data); ++ if (ret) ++ goto err_phy_trans; ++ ++ qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x30, phy_dwc3->mpll); ++ ++ /* ++ * Set the QSCRATCH PHY_PARAM_CTRL1 parameters as follows ++ * TX_FULL_SWING [26:20] amplitude to 110 ++ * TX_DEEMPH_6DB [19:14] to 32 ++ * TX_DEEMPH_3_5DB [13:8] set based on SoC version ++ * LOS_BIAS [7:3] to 9 ++ */ ++ data = readl(phy_dwc3->base + SSUSB_PHY_PARAM_CTRL_1); ++ ++ data &= ~PHY_PARAM_CTRL1_MASK; ++ ++ data |= PHY_PARAM_CTRL1_TX_FULL_SWING(0x6e) | ++ PHY_PARAM_CTRL1_TX_DEEMPH_6DB(0x20) | ++ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(phy_dwc3->tx_deamp_3_5db) | ++ PHY_PARAM_CTRL1_LOS_BIAS(0x9); ++ ++ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_PARAM_CTRL_1, ++ PHY_PARAM_CTRL1_MASK, data); ++ ++err_phy_trans: ++ return ret; ++} ++ ++static int qcom_dwc3_ss_phy_exit(struct phy *phy) ++{ ++ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy); ++ ++ /* Sequence to put SSPHY in low power state: ++ * 1. Clear REF_PHY_EN in PHY_CTRL_REG ++ * 2. Clear REF_USE_PAD in PHY_CTRL_REG ++ * 3. Set TEST_POWERED_DOWN in PHY_CTRL_REG to enable PHY retention ++ */ ++ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG, ++ SSUSB_CTRL_SS_PHY_EN, 0x0); ++ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG, ++ SSUSB_CTRL_REF_USE_PAD, 0x0); ++ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG, ++ SSUSB_CTRL_TEST_POWERDOWN, 0x0); ++ ++ clk_disable_unprepare(phy_dwc3->ref_clk); ++ clk_disable_unprepare(phy_dwc3->xo_clk); ++ ++ return 0; ++} ++ ++static const struct qcom_dwc3_phy_drvdata qcom_dwc3_hs_drvdata = { ++ .ops = { ++ .init = qcom_dwc3_hs_phy_init, ++ .exit = qcom_dwc3_hs_phy_exit, ++ .owner = THIS_MODULE, ++ }, ++ .clk_rate = 60000000, ++}; ++ ++static const struct qcom_dwc3_phy_drvdata qcom_dwc3_ss_drvdata = { ++ .ops = { ++ .init = qcom_dwc3_ss_phy_init, ++ .exit = qcom_dwc3_ss_phy_exit, ++ .owner = THIS_MODULE, ++ }, ++ .clk_rate = 125000000, ++}; ++ ++static const struct of_device_id qcom_dwc3_phy_table[] = { ++ { .compatible = "qcom,dwc3-hs-usb-phy", .data = &qcom_dwc3_hs_drvdata }, ++ { .compatible = "qcom,dwc3-ss-usb-phy", .data = &qcom_dwc3_ss_drvdata }, ++ { /* Sentinel */ } ++}; ++MODULE_DEVICE_TABLE(of, qcom_dwc3_phy_table); ++ ++static int qcom_dwc3_phy_probe(struct platform_device *pdev) ++{ ++ struct qcom_dwc3_usb_phy *phy_dwc3; ++ struct phy_provider *phy_provider; ++ struct phy *generic_phy; ++ struct resource *res; ++ const struct of_device_id *match; ++ const struct qcom_dwc3_phy_drvdata *data; ++ struct device_node *np; ++ ++ phy_dwc3 = devm_kzalloc(&pdev->dev, sizeof(*phy_dwc3), GFP_KERNEL); ++ if (!phy_dwc3) ++ return -ENOMEM; ++ ++ match = of_match_node(qcom_dwc3_phy_table, pdev->dev.of_node); ++ data = match->data; ++ ++ phy_dwc3->dev = &pdev->dev; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ phy_dwc3->base = devm_ioremap_resource(phy_dwc3->dev, res); ++ if (IS_ERR(phy_dwc3->base)) ++ return PTR_ERR(phy_dwc3->base); ++ ++ phy_dwc3->ref_clk = devm_clk_get(phy_dwc3->dev, "ref"); ++ if (IS_ERR(phy_dwc3->ref_clk)) { ++ dev_dbg(phy_dwc3->dev, "cannot get reference clock\n"); ++ return PTR_ERR(phy_dwc3->ref_clk); ++ } ++ ++ clk_set_rate(phy_dwc3->ref_clk, data->clk_rate); ++ ++ phy_dwc3->xo_clk = devm_clk_get(phy_dwc3->dev, "xo"); ++ if (IS_ERR(phy_dwc3->xo_clk)) { ++ dev_dbg(phy_dwc3->dev, "cannot get TCXO clock\n"); ++ phy_dwc3->xo_clk = NULL; ++ } ++ ++ /* Parse device node to probe HSIO settings */ ++ np = of_node_get(pdev->dev.of_node); ++ if (!of_compat_cmp(match->compatible, "qcom,dwc3-ss-usb-phy", ++ strlen(match->compatible))) { ++ ++ if (of_property_read_u32(np, "rx_eq", &phy_dwc3->rx_eq) || ++ of_property_read_u32(np, "tx_deamp_3_5db", ++ &phy_dwc3->tx_deamp_3_5db) || ++ of_property_read_u32(np, "mpll", &phy_dwc3->mpll)) { ++ ++ dev_err(phy_dwc3->dev, "cannot get HSIO settings from device node, using default values\n"); ++ ++ /* Default HSIO settings */ ++ phy_dwc3->rx_eq = SSPHY_RX_EQ_VALUE; ++ phy_dwc3->tx_deamp_3_5db = SSPHY_TX_DEEMPH_3_5DB; ++ phy_dwc3->mpll = SSPHY_MPLL_VALUE; ++ } ++ } ++ ++ generic_phy = devm_phy_create(phy_dwc3->dev, pdev->dev.of_node, ++ &data->ops); ++ ++ if (IS_ERR(generic_phy)) ++ return PTR_ERR(generic_phy); ++ ++ phy_set_drvdata(generic_phy, phy_dwc3); ++ platform_set_drvdata(pdev, phy_dwc3); ++ ++ phy_provider = devm_of_phy_provider_register(phy_dwc3->dev, ++ of_phy_simple_xlate); ++ ++ if (IS_ERR(phy_provider)) ++ return PTR_ERR(phy_provider); ++ ++ return 0; ++} ++ ++static struct platform_driver qcom_dwc3_phy_driver = { ++ .probe = qcom_dwc3_phy_probe, ++ .driver = { ++ .name = "qcom-dwc3-usb-phy", ++ .owner = THIS_MODULE, ++ .of_match_table = qcom_dwc3_phy_table, ++ }, ++}; ++ ++module_platform_driver(qcom_dwc3_phy_driver); ++ ++MODULE_ALIAS("platform:phy-qcom-dwc3"); ++MODULE_LICENSE("GPL v2"); ++MODULE_AUTHOR("Andy Gross "); ++MODULE_AUTHOR("Ivan T. Ivanov "); ++MODULE_DESCRIPTION("DesignWare USB3 QCOM PHY driver"); diff --git a/target/linux/ipq806x/patches-4.14/0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch b/target/linux/ipq806x/patches-4.14/0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch new file mode 100644 index 0000000000..1948152b14 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch @@ -0,0 +1,28 @@ +From 48051ece78136e4235a2415a52797db56f8a4478 Mon Sep 17 00:00:00 2001 +From: Mathieu Olivari +Date: Tue, 21 Apr 2015 19:09:07 -0700 +Subject: [PATCH 33/69] ARM: qcom: automatically select PCI_DOMAINS if PCI is + enabled + +If multiple PCIe devices are present in the system, the kernel will +panic at boot time when trying to scan the PCI buses. This happens on +IPQ806x based platforms, which has 3 PCIe ports. + +Enabling this option allows the kernel to assign the pci-domains +according to the device-tree content. This allows multiple PCIe +controllers to coexist in the system. + +Signed-off-by: Mathieu Olivari +--- + arch/arm/mach-qcom/Kconfig | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/arm/mach-qcom/Kconfig ++++ b/arch/arm/mach-qcom/Kconfig +@@ -6,6 +6,7 @@ menuconfig ARCH_QCOM + select ARM_AMBA + select PINCTRL + select QCOM_SCM if SMP ++ select PCI_DOMAINS if PCI + help + Support for Qualcomm's devicetree based systems. diff --git a/target/linux/ipq806x/patches-4.14/0034-ARM-Add-Krait-L2-register-accessor-functions.patch b/target/linux/ipq806x/patches-4.14/0034-ARM-Add-Krait-L2-register-accessor-functions.patch new file mode 100644 index 0000000000..3f820fa4f6 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0034-ARM-Add-Krait-L2-register-accessor-functions.patch @@ -0,0 +1,147 @@ +From patchwork Fri Dec 8 09:42:19 2017 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v4,01/12] ARM: Add Krait L2 register accessor functions +From: Sricharan R +X-Patchwork-Id: 10102101 +Message-Id: <1512726150-7204-2-git-send-email-sricharan@codeaurora.org> +To: mturquette@baylibre.com, sboyd@codeaurora.org, + devicetree@vger.kernel.org, linux-pm@vger.kernel.org, + linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, + viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org +Cc: sricharan@codeaurora.org, Mark Rutland , + Russell King , + Courtney Cavin +Date: Fri, 8 Dec 2017 15:12:19 +0530 + +From: Stephen Boyd + +Krait CPUs have a handful of L2 cache controller registers that +live behind a cp15 based indirection register. First you program +the indirection register (l2cpselr) to point the L2 'window' +register (l2cpdr) at what you want to read/write. Then you +read/write the 'window' register to do what you want. The +l2cpselr register is not banked per-cpu so we must lock around +accesses to it to prevent other CPUs from re-pointing l2cpdr +underneath us. + +Cc: Mark Rutland +Cc: Russell King +Cc: Courtney Cavin +Signed-off-by: Stephen Boyd +--- + arch/arm/common/Kconfig | 3 ++ + arch/arm/common/Makefile | 1 + + arch/arm/common/krait-l2-accessors.c | 58 +++++++++++++++++++++++++++++++ + arch/arm/include/asm/krait-l2-accessors.h | 20 +++++++++++ + 4 files changed, 82 insertions(+) + create mode 100644 arch/arm/common/krait-l2-accessors.c + create mode 100644 arch/arm/include/asm/krait-l2-accessors.h + +--- a/arch/arm/common/Kconfig ++++ b/arch/arm/common/Kconfig +@@ -7,6 +7,9 @@ config DMABOUNCE + bool + select ZONE_DMA + ++config KRAIT_L2_ACCESSORS ++ bool ++ + config SHARP_LOCOMO + bool + +--- a/arch/arm/common/Makefile ++++ b/arch/arm/common/Makefile +@@ -7,6 +7,7 @@ obj-y += firmware.o + + obj-$(CONFIG_SA1111) += sa1111.o + obj-$(CONFIG_DMABOUNCE) += dmabounce.o ++obj-$(CONFIG_KRAIT_L2_ACCESSORS) += krait-l2-accessors.o + obj-$(CONFIG_SHARP_LOCOMO) += locomo.o + obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o + obj-$(CONFIG_SHARP_SCOOP) += scoop.o +--- /dev/null ++++ b/arch/arm/common/krait-l2-accessors.c +@@ -0,0 +1,58 @@ ++/* ++ * Copyright (c) 2011-2013, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++ ++#include ++#include ++ ++static DEFINE_RAW_SPINLOCK(krait_l2_lock); ++ ++void krait_set_l2_indirect_reg(u32 addr, u32 val) ++{ ++ unsigned long flags; ++ ++ raw_spin_lock_irqsave(&krait_l2_lock, flags); ++ /* ++ * Select the L2 window by poking l2cpselr, then write to the window ++ * via l2cpdr. ++ */ ++ asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr)); ++ isb(); ++ asm volatile ("mcr p15, 3, %0, c15, c0, 7 @ l2cpdr" : : "r" (val)); ++ isb(); ++ ++ raw_spin_unlock_irqrestore(&krait_l2_lock, flags); ++} ++EXPORT_SYMBOL(krait_set_l2_indirect_reg); ++ ++u32 krait_get_l2_indirect_reg(u32 addr) ++{ ++ u32 val; ++ unsigned long flags; ++ ++ raw_spin_lock_irqsave(&krait_l2_lock, flags); ++ /* ++ * Select the L2 window by poking l2cpselr, then read from the window ++ * via l2cpdr. ++ */ ++ asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr)); ++ isb(); ++ asm volatile ("mrc p15, 3, %0, c15, c0, 7 @ l2cpdr" : "=r" (val)); ++ ++ raw_spin_unlock_irqrestore(&krait_l2_lock, flags); ++ ++ return val; ++} ++EXPORT_SYMBOL(krait_get_l2_indirect_reg); +--- /dev/null ++++ b/arch/arm/include/asm/krait-l2-accessors.h +@@ -0,0 +1,20 @@ ++/* ++ * Copyright (c) 2011-2013, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#ifndef __ASMARM_KRAIT_L2_ACCESSORS_H ++#define __ASMARM_KRAIT_L2_ACCESSORS_H ++ ++extern void krait_set_l2_indirect_reg(u32 addr, u32 val); ++extern u32 krait_get_l2_indirect_reg(u32 addr); ++ ++#endif diff --git a/target/linux/ipq806x/patches-4.14/0035-clk-mux-Split-out-register-accessors-for-reuse.patch b/target/linux/ipq806x/patches-4.14/0035-clk-mux-Split-out-register-accessors-for-reuse.patch new file mode 100644 index 0000000000..43b25a3c51 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0035-clk-mux-Split-out-register-accessors-for-reuse.patch @@ -0,0 +1,195 @@ +From patchwork Fri Dec 8 09:42:20 2017 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v4,02/12] clk: mux: Split out register accessors for reuse +From: Sricharan R +X-Patchwork-Id: 10102103 +Message-Id: <1512726150-7204-3-git-send-email-sricharan@codeaurora.org> +To: mturquette@baylibre.com, sboyd@codeaurora.org, + devicetree@vger.kernel.org, linux-pm@vger.kernel.org, + linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, + viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org +Cc: sricharan@codeaurora.org +Date: Fri, 8 Dec 2017 15:12:20 +0530 + +From: Stephen Boyd + +We want to reuse the logic in clk-mux.c for other clock drivers +that don't use readl as register accessors. Fortunately, there +really isn't much to the mux code besides the table indirection +and quirk flags if you assume any bit shifting and masking has +been done already. Pull that logic out into reusable functions +that operate on an optional table and some flags so that other +drivers can use the same logic. + +Signed-off-by: Stephen Boyd +--- + drivers/clk/clk-mux.c | 75 +++++++++++++++++++++++++++----------------- + include/linux/clk-provider.h | 9 ++++-- + 2 files changed, 54 insertions(+), 30 deletions(-) + +--- a/drivers/clk/clk-mux.c ++++ b/drivers/clk/clk-mux.c +@@ -26,35 +26,24 @@ + * parent - parent is adjustable through clk_set_parent + */ + +-static u8 clk_mux_get_parent(struct clk_hw *hw) ++unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val, ++ unsigned int *table, unsigned long flags) + { +- struct clk_mux *mux = to_clk_mux(hw); + int num_parents = clk_hw_get_num_parents(hw); +- u32 val; +- +- /* +- * FIXME need a mux-specific flag to determine if val is bitwise or numeric +- * e.g. sys_clkin_ck's clksel field is 3 bits wide, but ranges from 0x1 +- * to 0x7 (index starts at one) +- * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so +- * val = 0x4 really means "bit 2, index starts at bit 0" +- */ +- val = clk_readl(mux->reg) >> mux->shift; +- val &= mux->mask; + +- if (mux->table) { ++ if (table) { + int i; + + for (i = 0; i < num_parents; i++) +- if (mux->table[i] == val) ++ if (table[i] == val) + return i; + return -EINVAL; + } + +- if (val && (mux->flags & CLK_MUX_INDEX_BIT)) ++ if (val && (flags & CLK_MUX_INDEX_BIT)) + val = ffs(val) - 1; + +- if (val && (mux->flags & CLK_MUX_INDEX_ONE)) ++ if (val && (flags & CLK_MUX_INDEX_ONE)) + val--; + + if (val >= num_parents) +@@ -62,23 +51,53 @@ static u8 clk_mux_get_parent(struct clk_ + + return val; + } ++EXPORT_SYMBOL_GPL(clk_mux_get_parent); + +-static int clk_mux_set_parent(struct clk_hw *hw, u8 index) ++static u8 _clk_mux_get_parent(struct clk_hw *hw) + { + struct clk_mux *mux = to_clk_mux(hw); + u32 val; +- unsigned long flags = 0; + +- if (mux->table) { +- index = mux->table[index]; ++ /* ++ * FIXME need a mux-specific flag to determine if val is bitwise or ++ * numeric e.g. sys_clkin_ck's clksel field is 3 bits wide, ++ * but ranges from 0x1 to 0x7 (index starts at one) ++ * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so ++ * val = 0x4 really means "bit 2, index starts at bit 0" ++ */ ++ val = clk_readl(mux->reg) >> mux->shift; ++ val &= mux->mask; ++ ++ return clk_mux_get_parent(hw, val, mux->table, mux->flags); ++} ++ ++unsigned int clk_mux_reindex(u8 index, unsigned int *table, ++ unsigned long flags) ++{ ++ unsigned int val = index; ++ ++ if (table) { ++ val = table[val]; + } else { +- if (mux->flags & CLK_MUX_INDEX_BIT) +- index = 1 << index; ++ if (flags & CLK_MUX_INDEX_BIT) ++ val = 1 << index; + +- if (mux->flags & CLK_MUX_INDEX_ONE) +- index++; ++ if (flags & CLK_MUX_INDEX_ONE) ++ val++; + } + ++ return val; ++} ++EXPORT_SYMBOL_GPL(clk_mux_reindex); ++ ++static int clk_mux_set_parent(struct clk_hw *hw, u8 index) ++{ ++ struct clk_mux *mux = to_clk_mux(hw); ++ u32 val; ++ unsigned long flags = 0; ++ ++ index = clk_mux_reindex(index, mux->table, mux->flags); ++ + if (mux->lock) + spin_lock_irqsave(mux->lock, flags); + else +@@ -102,14 +121,14 @@ static int clk_mux_set_parent(struct clk + } + + const struct clk_ops clk_mux_ops = { +- .get_parent = clk_mux_get_parent, ++ .get_parent = _clk_mux_get_parent, + .set_parent = clk_mux_set_parent, + .determine_rate = __clk_mux_determine_rate, + }; + EXPORT_SYMBOL_GPL(clk_mux_ops); + + const struct clk_ops clk_mux_ro_ops = { +- .get_parent = clk_mux_get_parent, ++ .get_parent = _clk_mux_get_parent, + }; + EXPORT_SYMBOL_GPL(clk_mux_ro_ops); + +@@ -117,7 +136,7 @@ struct clk_hw *clk_hw_register_mux_table + const char * const *parent_names, u8 num_parents, + unsigned long flags, + void __iomem *reg, u8 shift, u32 mask, +- u8 clk_mux_flags, u32 *table, spinlock_t *lock) ++ u8 clk_mux_flags, unsigned int *table, spinlock_t *lock) + { + struct clk_mux *mux; + struct clk_hw *hw; +--- a/include/linux/clk-provider.h ++++ b/include/linux/clk-provider.h +@@ -468,7 +468,7 @@ void clk_hw_unregister_divider(struct cl + struct clk_mux { + struct clk_hw hw; + void __iomem *reg; +- u32 *table; ++ unsigned int *table; + u32 mask; + u8 shift; + u8 flags; +@@ -486,6 +486,11 @@ struct clk_mux { + extern const struct clk_ops clk_mux_ops; + extern const struct clk_ops clk_mux_ro_ops; + ++unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val, ++ unsigned int *table, unsigned long flags); ++unsigned int clk_mux_reindex(u8 index, unsigned int *table, ++ unsigned long flags); ++ + struct clk *clk_register_mux(struct device *dev, const char *name, + const char * const *parent_names, u8 num_parents, + unsigned long flags, +@@ -506,7 +511,7 @@ struct clk_hw *clk_hw_register_mux_table + const char * const *parent_names, u8 num_parents, + unsigned long flags, + void __iomem *reg, u8 shift, u32 mask, +- u8 clk_mux_flags, u32 *table, spinlock_t *lock); ++ u8 clk_mux_flags, unsigned int *table, spinlock_t *lock); + + void clk_unregister_mux(struct clk *clk); + void clk_hw_unregister_mux(struct clk_hw *hw); diff --git a/target/linux/ipq806x/patches-4.14/0038-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch b/target/linux/ipq806x/patches-4.14/0038-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch new file mode 100644 index 0000000000..e0157d56b8 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0038-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch @@ -0,0 +1,352 @@ +From patchwork Fri Dec 8 09:42:21 2017 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v4,03/12] clk: qcom: Add support for High-Frequency PLLs (HFPLLs) +From: Sricharan R +X-Patchwork-Id: 10102083 +Message-Id: <1512726150-7204-4-git-send-email-sricharan@codeaurora.org> +To: mturquette@baylibre.com, sboyd@codeaurora.org, + devicetree@vger.kernel.org, linux-pm@vger.kernel.org, + linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, + viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org +Cc: sricharan@codeaurora.org +Date: Fri, 8 Dec 2017 15:12:21 +0530 + +From: Stephen Boyd + +HFPLLs are the main frequency source for Krait CPU clocks. Add +support for changing the rate of these PLLs. + +Signed-off-by: Stephen Boyd +--- + drivers/clk/qcom/Makefile | 1 + + drivers/clk/qcom/clk-hfpll.c | 253 +++++++++++++++++++++++++++++++++++++++++++ + drivers/clk/qcom/clk-hfpll.h | 54 +++++++++ + 3 files changed, 308 insertions(+) + create mode 100644 drivers/clk/qcom/clk-hfpll.c + create mode 100644 drivers/clk/qcom/clk-hfpll.h + +--- a/drivers/clk/qcom/Makefile ++++ b/drivers/clk/qcom/Makefile +@@ -10,6 +10,7 @@ clk-qcom-y += clk-rcg2.o + clk-qcom-y += clk-branch.o + clk-qcom-y += clk-regmap-divider.o + clk-qcom-y += clk-regmap-mux.o ++clk-qcom-y += clk-hfpll.o + clk-qcom-y += reset.o + clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o + +--- /dev/null ++++ b/drivers/clk/qcom/clk-hfpll.c +@@ -0,0 +1,253 @@ ++/* ++ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "clk-regmap.h" ++#include "clk-hfpll.h" ++ ++#define PLL_OUTCTRL BIT(0) ++#define PLL_BYPASSNL BIT(1) ++#define PLL_RESET_N BIT(2) ++ ++/* Initialize a HFPLL at a given rate and enable it. */ ++static void __clk_hfpll_init_once(struct clk_hw *hw) ++{ ++ struct clk_hfpll *h = to_clk_hfpll(hw); ++ struct hfpll_data const *hd = h->d; ++ struct regmap *regmap = h->clkr.regmap; ++ ++ if (likely(h->init_done)) ++ return; ++ ++ /* Configure PLL parameters for integer mode. */ ++ if (hd->config_val) ++ regmap_write(regmap, hd->config_reg, hd->config_val); ++ regmap_write(regmap, hd->m_reg, 0); ++ regmap_write(regmap, hd->n_reg, 1); ++ ++ if (hd->user_reg) { ++ u32 regval = hd->user_val; ++ unsigned long rate; ++ ++ rate = clk_hw_get_rate(hw); ++ ++ /* Pick the right VCO. */ ++ if (hd->user_vco_mask && rate > hd->low_vco_max_rate) ++ regval |= hd->user_vco_mask; ++ regmap_write(regmap, hd->user_reg, regval); ++ } ++ ++ if (hd->droop_reg) ++ regmap_write(regmap, hd->droop_reg, hd->droop_val); ++ ++ h->init_done = true; ++} ++ ++static void __clk_hfpll_enable(struct clk_hw *hw) ++{ ++ struct clk_hfpll *h = to_clk_hfpll(hw); ++ struct hfpll_data const *hd = h->d; ++ struct regmap *regmap = h->clkr.regmap; ++ u32 val; ++ ++ __clk_hfpll_init_once(hw); ++ ++ /* Disable PLL bypass mode. */ ++ regmap_update_bits(regmap, hd->mode_reg, PLL_BYPASSNL, PLL_BYPASSNL); ++ ++ /* ++ * H/W requires a 5us delay between disabling the bypass and ++ * de-asserting the reset. Delay 10us just to be safe. ++ */ ++ usleep_range(10, 100); ++ ++ /* De-assert active-low PLL reset. */ ++ regmap_update_bits(regmap, hd->mode_reg, PLL_RESET_N, PLL_RESET_N); ++ ++ /* Wait for PLL to lock. */ ++ if (hd->status_reg) { ++ do { ++ regmap_read(regmap, hd->status_reg, &val); ++ } while (!(val & BIT(hd->lock_bit))); ++ } else { ++ usleep_range(60, 100); ++ } ++ ++ /* Enable PLL output. */ ++ regmap_update_bits(regmap, hd->mode_reg, PLL_OUTCTRL, PLL_OUTCTRL); ++} ++ ++/* Enable an already-configured HFPLL. */ ++static int clk_hfpll_enable(struct clk_hw *hw) ++{ ++ unsigned long flags; ++ struct clk_hfpll *h = to_clk_hfpll(hw); ++ struct hfpll_data const *hd = h->d; ++ struct regmap *regmap = h->clkr.regmap; ++ u32 mode; ++ ++ spin_lock_irqsave(&h->lock, flags); ++ regmap_read(regmap, hd->mode_reg, &mode); ++ if (!(mode & (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL))) ++ __clk_hfpll_enable(hw); ++ spin_unlock_irqrestore(&h->lock, flags); ++ ++ return 0; ++} ++ ++static void __clk_hfpll_disable(struct clk_hfpll *h) ++{ ++ struct hfpll_data const *hd = h->d; ++ struct regmap *regmap = h->clkr.regmap; ++ ++ /* ++ * Disable the PLL output, disable test mode, enable the bypass mode, ++ * and assert the reset. ++ */ ++ regmap_update_bits(regmap, hd->mode_reg, ++ PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL, 0); ++} ++ ++static void clk_hfpll_disable(struct clk_hw *hw) ++{ ++ struct clk_hfpll *h = to_clk_hfpll(hw); ++ unsigned long flags; ++ ++ spin_lock_irqsave(&h->lock, flags); ++ __clk_hfpll_disable(h); ++ spin_unlock_irqrestore(&h->lock, flags); ++} ++ ++static long clk_hfpll_round_rate(struct clk_hw *hw, unsigned long rate, ++ unsigned long *parent_rate) ++{ ++ struct clk_hfpll *h = to_clk_hfpll(hw); ++ struct hfpll_data const *hd = h->d; ++ unsigned long rrate; ++ ++ rate = clamp(rate, hd->min_rate, hd->max_rate); ++ ++ rrate = DIV_ROUND_UP(rate, *parent_rate) * *parent_rate; ++ if (rrate > hd->max_rate) ++ rrate -= *parent_rate; ++ ++ return rrate; ++} ++ ++/* ++ * For optimization reasons, assumes no downstream clocks are actively using ++ * it. ++ */ ++static int clk_hfpll_set_rate(struct clk_hw *hw, unsigned long rate, ++ unsigned long parent_rate) ++{ ++ struct clk_hfpll *h = to_clk_hfpll(hw); ++ struct hfpll_data const *hd = h->d; ++ struct regmap *regmap = h->clkr.regmap; ++ unsigned long flags; ++ u32 l_val, val; ++ bool enabled; ++ ++ l_val = rate / parent_rate; ++ ++ spin_lock_irqsave(&h->lock, flags); ++ ++ enabled = __clk_is_enabled(hw->clk); ++ if (enabled) ++ __clk_hfpll_disable(h); ++ ++ /* Pick the right VCO. */ ++ if (hd->user_reg && hd->user_vco_mask) { ++ regmap_read(regmap, hd->user_reg, &val); ++ if (rate <= hd->low_vco_max_rate) ++ val &= ~hd->user_vco_mask; ++ else ++ val |= hd->user_vco_mask; ++ regmap_write(regmap, hd->user_reg, val); ++ } ++ ++ regmap_write(regmap, hd->l_reg, l_val); ++ ++ if (enabled) ++ __clk_hfpll_enable(hw); ++ ++ spin_unlock_irqrestore(&h->lock, flags); ++ ++ return 0; ++} ++ ++static unsigned long clk_hfpll_recalc_rate(struct clk_hw *hw, ++ unsigned long parent_rate) ++{ ++ struct clk_hfpll *h = to_clk_hfpll(hw); ++ struct hfpll_data const *hd = h->d; ++ struct regmap *regmap = h->clkr.regmap; ++ u32 l_val; ++ ++ regmap_read(regmap, hd->l_reg, &l_val); ++ ++ return l_val * parent_rate; ++} ++ ++static void clk_hfpll_init(struct clk_hw *hw) ++{ ++ struct clk_hfpll *h = to_clk_hfpll(hw); ++ struct hfpll_data const *hd = h->d; ++ struct regmap *regmap = h->clkr.regmap; ++ u32 mode, status; ++ ++ regmap_read(regmap, hd->mode_reg, &mode); ++ if (mode != (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL)) { ++ __clk_hfpll_init_once(hw); ++ return; ++ } ++ ++ if (hd->status_reg) { ++ regmap_read(regmap, hd->status_reg, &status); ++ if (!(status & BIT(hd->lock_bit))) { ++ WARN(1, "HFPLL %s is ON, but not locked!\n", ++ __clk_get_name(hw->clk)); ++ clk_hfpll_disable(hw); ++ __clk_hfpll_init_once(hw); ++ } ++ } ++} ++ ++static int hfpll_is_enabled(struct clk_hw *hw) ++{ ++ struct clk_hfpll *h = to_clk_hfpll(hw); ++ struct hfpll_data const *hd = h->d; ++ struct regmap *regmap = h->clkr.regmap; ++ u32 mode; ++ ++ regmap_read(regmap, hd->mode_reg, &mode); ++ mode &= 0x7; ++ return mode == (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL); ++} ++ ++const struct clk_ops clk_ops_hfpll = { ++ .enable = clk_hfpll_enable, ++ .disable = clk_hfpll_disable, ++ .is_enabled = hfpll_is_enabled, ++ .round_rate = clk_hfpll_round_rate, ++ .set_rate = clk_hfpll_set_rate, ++ .recalc_rate = clk_hfpll_recalc_rate, ++ .init = clk_hfpll_init, ++}; ++EXPORT_SYMBOL_GPL(clk_ops_hfpll); +--- /dev/null ++++ b/drivers/clk/qcom/clk-hfpll.h +@@ -0,0 +1,54 @@ ++/* ++ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++#ifndef __QCOM_CLK_HFPLL_H__ ++#define __QCOM_CLK_HFPLL_H__ ++ ++#include ++#include ++#include "clk-regmap.h" ++ ++struct hfpll_data { ++ u32 mode_reg; ++ u32 l_reg; ++ u32 m_reg; ++ u32 n_reg; ++ u32 user_reg; ++ u32 droop_reg; ++ u32 config_reg; ++ u32 status_reg; ++ u8 lock_bit; ++ ++ u32 droop_val; ++ u32 config_val; ++ u32 user_val; ++ u32 user_vco_mask; ++ unsigned long low_vco_max_rate; ++ ++ unsigned long min_rate; ++ unsigned long max_rate; ++}; ++ ++struct clk_hfpll { ++ struct hfpll_data const *d; ++ int init_done; ++ ++ struct clk_regmap clkr; ++ spinlock_t lock; ++}; ++ ++#define to_clk_hfpll(_hw) \ ++ container_of(to_clk_regmap(_hw), struct clk_hfpll, clkr) ++ ++extern const struct clk_ops clk_ops_hfpll; ++ ++#endif diff --git a/target/linux/ipq806x/patches-4.14/0039-clk-qcom-Add-HFPLL-driver.patch b/target/linux/ipq806x/patches-4.14/0039-clk-qcom-Add-HFPLL-driver.patch new file mode 100644 index 0000000000..8f5024074d --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0039-clk-qcom-Add-HFPLL-driver.patch @@ -0,0 +1,206 @@ +From patchwork Fri Dec 8 09:42:22 2017 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v4,04/12] clk: qcom: Add HFPLL driver +From: Sricharan R +X-Patchwork-Id: 10102079 +Message-Id: <1512726150-7204-5-git-send-email-sricharan@codeaurora.org> +To: mturquette@baylibre.com, sboyd@codeaurora.org, + devicetree@vger.kernel.org, linux-pm@vger.kernel.org, + linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, + viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org +Cc: sricharan@codeaurora.org +Date: Fri, 8 Dec 2017 15:12:22 +0530 + +From: Stephen Boyd + +On some devices (MSM8974 for example), the HFPLLs are +instantiated within the Krait processor subsystem as separate +register regions. Add a driver for these PLLs so that we can +provide HFPLL clocks for use by the system. + +Cc: +Signed-off-by: Stephen Boyd +--- + .../devicetree/bindings/clock/qcom,hfpll.txt | 40 ++++++++ + drivers/clk/qcom/Kconfig | 8 ++ + drivers/clk/qcom/Makefile | 1 + + drivers/clk/qcom/hfpll.c | 106 +++++++++++++++++++++ + 4 files changed, 155 insertions(+) + create mode 100644 Documentation/devicetree/bindings/clock/qcom,hfpll.txt + create mode 100644 drivers/clk/qcom/hfpll.c + +--- /dev/null ++++ b/Documentation/devicetree/bindings/clock/qcom,hfpll.txt +@@ -0,0 +1,40 @@ ++High-Frequency PLL (HFPLL) ++ ++PROPERTIES ++ ++- compatible: ++ Usage: required ++ Value type: ++ Definition: must be "qcom,hfpll" ++ ++- reg: ++ Usage: required ++ Value type: ++ Definition: address and size of HPLL registers. An optional second ++ element specifies the address and size of the alias ++ register region. ++ ++- clock-output-names: ++ Usage: required ++ Value type: ++ Definition: Name of the PLL. Typically hfpllX where X is a CPU number ++ starting at 0. Otherwise hfpll_Y where Y is more specific ++ such as "l2". ++ ++Example: ++ ++1) An HFPLL for the L2 cache. ++ ++ clock-controller@f9016000 { ++ compatible = "qcom,hfpll"; ++ reg = <0xf9016000 0x30>; ++ clock-output-names = "hfpll_l2"; ++ }; ++ ++2) An HFPLL for CPU0. This HFPLL has the alias register region. ++ ++ clock-controller@f908a000 { ++ compatible = "qcom,hfpll"; ++ reg = <0xf908a000 0x30>, <0xf900a000 0x30>; ++ clock-output-names = "hfpll0"; ++ }; +--- a/drivers/clk/qcom/Kconfig ++++ b/drivers/clk/qcom/Kconfig +@@ -196,3 +196,11 @@ config MSM_MMCC_8996 + Support for the multimedia clock controller on msm8996 devices. + Say Y if you want to support multimedia devices such as display, + graphics, video encode/decode, camera, etc. ++ ++config QCOM_HFPLL ++ tristate "High-Frequency PLL (HFPLL) Clock Controller" ++ depends on COMMON_CLK_QCOM ++ help ++ Support for the high-frequency PLLs present on Qualcomm devices. ++ Say Y if you want to support CPU frequency scaling on devices ++ such as MSM8974, APQ8084, etc. +--- a/drivers/clk/qcom/Makefile ++++ b/drivers/clk/qcom/Makefile +@@ -35,3 +35,4 @@ obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8 + obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o + obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o + obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o ++obj-$(CONFIG_QCOM_HFPLL) += hfpll.o +--- /dev/null ++++ b/drivers/clk/qcom/hfpll.c +@@ -0,0 +1,106 @@ ++/* ++ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "clk-regmap.h" ++#include "clk-hfpll.h" ++ ++static const struct hfpll_data hdata = { ++ .mode_reg = 0x00, ++ .l_reg = 0x04, ++ .m_reg = 0x08, ++ .n_reg = 0x0c, ++ .user_reg = 0x10, ++ .config_reg = 0x14, ++ .config_val = 0x430405d, ++ .status_reg = 0x1c, ++ .lock_bit = 16, ++ ++ .user_val = 0x8, ++ .user_vco_mask = 0x100000, ++ .low_vco_max_rate = 1248000000, ++ .min_rate = 537600000UL, ++ .max_rate = 2900000000UL, ++}; ++ ++static const struct of_device_id qcom_hfpll_match_table[] = { ++ { .compatible = "qcom,hfpll" }, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, qcom_hfpll_match_table); ++ ++static const struct regmap_config hfpll_regmap_config = { ++ .reg_bits = 32, ++ .reg_stride = 4, ++ .val_bits = 32, ++ .max_register = 0x30, ++ .fast_io = true, ++}; ++ ++static int qcom_hfpll_probe(struct platform_device *pdev) ++{ ++ struct resource *res; ++ struct device *dev = &pdev->dev; ++ void __iomem *base; ++ struct regmap *regmap; ++ struct clk_hfpll *h; ++ struct clk_init_data init = { ++ .parent_names = (const char *[]){ "xo" }, ++ .num_parents = 1, ++ .ops = &clk_ops_hfpll, ++ }; ++ ++ h = devm_kzalloc(dev, sizeof(*h), GFP_KERNEL); ++ if (!h) ++ return -ENOMEM; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ base = devm_ioremap_resource(dev, res); ++ if (IS_ERR(base)) ++ return PTR_ERR(base); ++ ++ regmap = devm_regmap_init_mmio(&pdev->dev, base, &hfpll_regmap_config); ++ if (IS_ERR(regmap)) ++ return PTR_ERR(regmap); ++ ++ if (of_property_read_string_index(dev->of_node, "clock-output-names", ++ 0, &init.name)) ++ return -ENODEV; ++ ++ h->d = &hdata; ++ h->clkr.hw.init = &init; ++ spin_lock_init(&h->lock); ++ ++ return devm_clk_register_regmap(&pdev->dev, &h->clkr); ++} ++ ++static struct platform_driver qcom_hfpll_driver = { ++ .probe = qcom_hfpll_probe, ++ .driver = { ++ .name = "qcom-hfpll", ++ .of_match_table = qcom_hfpll_match_table, ++ }, ++}; ++module_platform_driver(qcom_hfpll_driver); ++ ++MODULE_DESCRIPTION("QCOM HFPLL Clock Driver"); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:qcom-hfpll"); diff --git a/target/linux/ipq806x/patches-4.14/0040-clk-qcom-Add-IPQ806X-s-HFPLLs.patch b/target/linux/ipq806x/patches-4.14/0040-clk-qcom-Add-IPQ806X-s-HFPLLs.patch new file mode 100644 index 0000000000..f17e96d0c1 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0040-clk-qcom-Add-IPQ806X-s-HFPLLs.patch @@ -0,0 +1,129 @@ +From patchwork Fri Dec 8 09:42:24 2017 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v4,06/12] clk: qcom: Add IPQ806X's HFPLLs +From: Sricharan R +X-Patchwork-Id: 10102047 +Message-Id: <1512726150-7204-7-git-send-email-sricharan@codeaurora.org> +To: mturquette@baylibre.com, sboyd@codeaurora.org, + devicetree@vger.kernel.org, linux-pm@vger.kernel.org, + linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, + viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org +Cc: sricharan@codeaurora.org +Date: Fri, 8 Dec 2017 15:12:24 +0530 + +From: Stephen Boyd + +Describe the HFPLLs present on IPQ806X devices. + +Signed-off-by: Stephen Boyd +--- + drivers/clk/qcom/gcc-ipq806x.c | 82 ++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 82 insertions(+) + +--- a/drivers/clk/qcom/gcc-ipq806x.c ++++ b/drivers/clk/qcom/gcc-ipq806x.c +@@ -30,6 +30,7 @@ + #include "clk-pll.h" + #include "clk-rcg.h" + #include "clk-branch.h" ++#include "clk-hfpll.h" + #include "reset.h" + + static struct clk_pll pll0 = { +@@ -113,6 +114,84 @@ static struct clk_regmap pll8_vote = { + }, + }; + ++static struct hfpll_data hfpll0_data = { ++ .mode_reg = 0x3200, ++ .l_reg = 0x3208, ++ .m_reg = 0x320c, ++ .n_reg = 0x3210, ++ .config_reg = 0x3204, ++ .status_reg = 0x321c, ++ .config_val = 0x7845c665, ++ .droop_reg = 0x3214, ++ .droop_val = 0x0108c000, ++ .min_rate = 600000000UL, ++ .max_rate = 1800000000UL, ++}; ++ ++static struct clk_hfpll hfpll0 = { ++ .d = &hfpll0_data, ++ .clkr.hw.init = &(struct clk_init_data){ ++ .parent_names = (const char *[]){ "pxo" }, ++ .num_parents = 1, ++ .name = "hfpll0", ++ .ops = &clk_ops_hfpll, ++ .flags = CLK_IGNORE_UNUSED, ++ }, ++ .lock = __SPIN_LOCK_UNLOCKED(hfpll0.lock), ++}; ++ ++static struct hfpll_data hfpll1_data = { ++ .mode_reg = 0x3240, ++ .l_reg = 0x3248, ++ .m_reg = 0x324c, ++ .n_reg = 0x3250, ++ .config_reg = 0x3244, ++ .status_reg = 0x325c, ++ .config_val = 0x7845c665, ++ .droop_reg = 0x3314, ++ .droop_val = 0x0108c000, ++ .min_rate = 600000000UL, ++ .max_rate = 1800000000UL, ++}; ++ ++static struct clk_hfpll hfpll1 = { ++ .d = &hfpll1_data, ++ .clkr.hw.init = &(struct clk_init_data){ ++ .parent_names = (const char *[]){ "pxo" }, ++ .num_parents = 1, ++ .name = "hfpll1", ++ .ops = &clk_ops_hfpll, ++ .flags = CLK_IGNORE_UNUSED, ++ }, ++ .lock = __SPIN_LOCK_UNLOCKED(hfpll1.lock), ++}; ++ ++static struct hfpll_data hfpll_l2_data = { ++ .mode_reg = 0x3300, ++ .l_reg = 0x3308, ++ .m_reg = 0x330c, ++ .n_reg = 0x3310, ++ .config_reg = 0x3304, ++ .status_reg = 0x331c, ++ .config_val = 0x7845c665, ++ .droop_reg = 0x3314, ++ .droop_val = 0x0108c000, ++ .min_rate = 600000000UL, ++ .max_rate = 1800000000UL, ++}; ++ ++static struct clk_hfpll hfpll_l2 = { ++ .d = &hfpll_l2_data, ++ .clkr.hw.init = &(struct clk_init_data){ ++ .parent_names = (const char *[]){ "pxo" }, ++ .num_parents = 1, ++ .name = "hfpll_l2", ++ .ops = &clk_ops_hfpll, ++ .flags = CLK_IGNORE_UNUSED, ++ }, ++ .lock = __SPIN_LOCK_UNLOCKED(hfpll_l2.lock), ++}; ++ + static struct clk_pll pll14 = { + .l_reg = 0x31c4, + .m_reg = 0x31c8, +@@ -2801,6 +2880,9 @@ static struct clk_regmap *gcc_ipq806x_cl + [UBI32_CORE2_CLK_SRC] = &ubi32_core2_src_clk.clkr, + [NSSTCM_CLK_SRC] = &nss_tcm_src.clkr, + [NSSTCM_CLK] = &nss_tcm_clk.clkr, ++ [PLL9] = &hfpll0.clkr, ++ [PLL10] = &hfpll1.clkr, ++ [PLL12] = &hfpll_l2.clkr, + }; + + static const struct qcom_reset_map gcc_ipq806x_resets[] = { diff --git a/target/linux/ipq806x/patches-4.14/0041-clk-qcom-Add-support-for-Krait-clocks.patch b/target/linux/ipq806x/patches-4.14/0041-clk-qcom-Add-support-for-Krait-clocks.patch new file mode 100644 index 0000000000..2a55dde68a --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0041-clk-qcom-Add-support-for-Krait-clocks.patch @@ -0,0 +1,241 @@ +From patchwork Fri Dec 8 09:42:25 2017 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v4,07/12] clk: qcom: Add support for Krait clocks +From: Sricharan R +X-Patchwork-Id: 10102051 +Message-Id: <1512726150-7204-8-git-send-email-sricharan@codeaurora.org> +To: mturquette@baylibre.com, sboyd@codeaurora.org, + devicetree@vger.kernel.org, linux-pm@vger.kernel.org, + linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, + viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org +Cc: sricharan@codeaurora.org +Date: Fri, 8 Dec 2017 15:12:25 +0530 + +From: Stephen Boyd + +The Krait clocks are made up of a series of muxes and a divider +that choose between a fixed rate clock and dedicated HFPLLs for +each CPU. Instead of using mmio accesses to remux parents, the +Krait implementation exposes the remux control via cp15 +registers. Support these clocks. + +Signed-off-by: Stephen Boyd +--- + drivers/clk/qcom/Kconfig | 4 ++ + drivers/clk/qcom/Makefile | 1 + + drivers/clk/qcom/clk-krait.c | 134 +++++++++++++++++++++++++++++++++++++++++++ + drivers/clk/qcom/clk-krait.h | 48 ++++++++++++++++ + 4 files changed, 187 insertions(+) + create mode 100644 drivers/clk/qcom/clk-krait.c + create mode 100644 drivers/clk/qcom/clk-krait.h + +--- a/drivers/clk/qcom/Kconfig ++++ b/drivers/clk/qcom/Kconfig +@@ -204,3 +204,7 @@ config QCOM_HFPLL + Support for the high-frequency PLLs present on Qualcomm devices. + Say Y if you want to support CPU frequency scaling on devices + such as MSM8974, APQ8084, etc. ++ ++config KRAIT_CLOCKS ++ bool ++ select KRAIT_L2_ACCESSORS +--- a/drivers/clk/qcom/Makefile ++++ b/drivers/clk/qcom/Makefile +@@ -10,6 +10,7 @@ clk-qcom-y += clk-rcg2.o + clk-qcom-y += clk-branch.o + clk-qcom-y += clk-regmap-divider.o + clk-qcom-y += clk-regmap-mux.o ++clk-qcom-$(CONFIG_KRAIT_CLOCKS) += clk-krait.o + clk-qcom-y += clk-hfpll.o + clk-qcom-y += reset.o + clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o +--- /dev/null ++++ b/drivers/clk/qcom/clk-krait.c +@@ -0,0 +1,134 @@ ++/* ++ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#include "clk-krait.h" ++ ++/* Secondary and primary muxes share the same cp15 register */ ++static DEFINE_SPINLOCK(krait_clock_reg_lock); ++ ++#define LPL_SHIFT 8 ++static void __krait_mux_set_sel(struct krait_mux_clk *mux, int sel) ++{ ++ unsigned long flags; ++ u32 regval; ++ ++ spin_lock_irqsave(&krait_clock_reg_lock, flags); ++ regval = krait_get_l2_indirect_reg(mux->offset); ++ regval &= ~(mux->mask << mux->shift); ++ regval |= (sel & mux->mask) << mux->shift; ++ if (mux->lpl) { ++ regval &= ~(mux->mask << (mux->shift + LPL_SHIFT)); ++ regval |= (sel & mux->mask) << (mux->shift + LPL_SHIFT); ++ } ++ krait_set_l2_indirect_reg(mux->offset, regval); ++ spin_unlock_irqrestore(&krait_clock_reg_lock, flags); ++ ++ /* Wait for switch to complete. */ ++ mb(); ++ udelay(1); ++} ++ ++static int krait_mux_set_parent(struct clk_hw *hw, u8 index) ++{ ++ struct krait_mux_clk *mux = to_krait_mux_clk(hw); ++ u32 sel; ++ ++ sel = clk_mux_reindex(index, mux->parent_map, 0); ++ mux->en_mask = sel; ++ /* Don't touch mux if CPU is off as it won't work */ ++ if (__clk_is_enabled(hw->clk)) ++ __krait_mux_set_sel(mux, sel); ++ ++ return 0; ++} ++ ++static u8 krait_mux_get_parent(struct clk_hw *hw) ++{ ++ struct krait_mux_clk *mux = to_krait_mux_clk(hw); ++ u32 sel; ++ ++ sel = krait_get_l2_indirect_reg(mux->offset); ++ sel >>= mux->shift; ++ sel &= mux->mask; ++ mux->en_mask = sel; ++ ++ return clk_mux_get_parent(hw, sel, mux->parent_map, 0); ++} ++ ++const struct clk_ops krait_mux_clk_ops = { ++ .set_parent = krait_mux_set_parent, ++ .get_parent = krait_mux_get_parent, ++ .determine_rate = __clk_mux_determine_rate_closest, ++}; ++EXPORT_SYMBOL_GPL(krait_mux_clk_ops); ++ ++/* The divider can divide by 2, 4, 6 and 8. But we only really need div-2. */ ++static long krait_div2_round_rate(struct clk_hw *hw, unsigned long rate, ++ unsigned long *parent_rate) ++{ ++ *parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw), rate * 2); ++ return DIV_ROUND_UP(*parent_rate, 2); ++} ++ ++static int krait_div2_set_rate(struct clk_hw *hw, unsigned long rate, ++ unsigned long parent_rate) ++{ ++ struct krait_div2_clk *d = to_krait_div2_clk(hw); ++ unsigned long flags; ++ u32 val; ++ u32 mask = BIT(d->width) - 1; ++ ++ if (d->lpl) ++ mask = mask << (d->shift + LPL_SHIFT) | mask << d->shift; ++ ++ spin_lock_irqsave(&krait_clock_reg_lock, flags); ++ val = krait_get_l2_indirect_reg(d->offset); ++ val &= ~mask; ++ krait_set_l2_indirect_reg(d->offset, val); ++ spin_unlock_irqrestore(&krait_clock_reg_lock, flags); ++ ++ return 0; ++} ++ ++static unsigned long ++krait_div2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) ++{ ++ struct krait_div2_clk *d = to_krait_div2_clk(hw); ++ u32 mask = BIT(d->width) - 1; ++ u32 div; ++ ++ div = krait_get_l2_indirect_reg(d->offset); ++ div >>= d->shift; ++ div &= mask; ++ div = (div + 1) * 2; ++ ++ return DIV_ROUND_UP(parent_rate, div); ++} ++ ++const struct clk_ops krait_div2_clk_ops = { ++ .round_rate = krait_div2_round_rate, ++ .set_rate = krait_div2_set_rate, ++ .recalc_rate = krait_div2_recalc_rate, ++}; ++EXPORT_SYMBOL_GPL(krait_div2_clk_ops); +--- /dev/null ++++ b/drivers/clk/qcom/clk-krait.h +@@ -0,0 +1,48 @@ ++/* ++ * Copyright (c) 2013, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#ifndef __QCOM_CLK_KRAIT_H ++#define __QCOM_CLK_KRAIT_H ++ ++#include ++ ++struct krait_mux_clk { ++ unsigned int *parent_map; ++ u32 offset; ++ u32 mask; ++ u32 shift; ++ u32 en_mask; ++ bool lpl; ++ ++ struct clk_hw hw; ++ struct notifier_block clk_nb; ++}; ++ ++#define to_krait_mux_clk(_hw) container_of(_hw, struct krait_mux_clk, hw) ++ ++extern const struct clk_ops krait_mux_clk_ops; ++ ++struct krait_div2_clk { ++ u32 offset; ++ u8 width; ++ u32 shift; ++ bool lpl; ++ ++ struct clk_hw hw; ++}; ++ ++#define to_krait_div2_clk(_hw) container_of(_hw, struct krait_div2_clk, hw) ++ ++extern const struct clk_ops krait_div2_clk_ops; ++ ++#endif diff --git a/target/linux/ipq806x/patches-4.14/0042-clk-qcom-Add-KPSS-ACC-GCC-driver.patch b/target/linux/ipq806x/patches-4.14/0042-clk-qcom-Add-KPSS-ACC-GCC-driver.patch new file mode 100644 index 0000000000..8846dba1a3 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0042-clk-qcom-Add-KPSS-ACC-GCC-driver.patch @@ -0,0 +1,209 @@ +From patchwork Fri Dec 8 09:42:26 2017 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v4,08/12] clk: qcom: Add KPSS ACC/GCC driver +From: Sricharan R +X-Patchwork-Id: 10102023 +Message-Id: <1512726150-7204-9-git-send-email-sricharan@codeaurora.org> +To: mturquette@baylibre.com, sboyd@codeaurora.org, + devicetree@vger.kernel.org, linux-pm@vger.kernel.org, + linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, + viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org +Cc: sricharan@codeaurora.org +Date: Fri, 8 Dec 2017 15:12:26 +0530 + +From: Stephen Boyd + +The ACC and GCC regions present in KPSSv1 contain registers to +control clocks and power to each Krait CPU and L2. For CPUfreq +purposes probe these devices and expose a mux clock that chooses +between PXO and PLL8. + +Cc: +Signed-off-by: Stephen Boyd +--- + .../devicetree/bindings/arm/msm/qcom,kpss-acc.txt | 7 ++ + .../devicetree/bindings/arm/msm/qcom,kpss-gcc.txt | 28 +++++++ + drivers/clk/qcom/Kconfig | 8 ++ + drivers/clk/qcom/Makefile | 1 + + drivers/clk/qcom/kpss-xcc.c | 96 ++++++++++++++++++++++ + 5 files changed, 140 insertions(+) + create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt + create mode 100644 drivers/clk/qcom/kpss-xcc.c + +--- a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt ++++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt +@@ -21,10 +21,17 @@ PROPERTIES + the register region. An optional second element specifies + the base address and size of the alias register region. + ++- clock-output-names: ++ Usage: optional ++ Value type: ++ Definition: Name of the output clock. Typically acpuX_aux where X is a ++ CPU number starting at 0. ++ + Example: + + clock-controller@2088000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x02088000 0x1000>, + <0x02008000 0x1000>; ++ clock-output-names = "acpu0_aux"; + }; +--- /dev/null ++++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt +@@ -0,0 +1,28 @@ ++Krait Processor Sub-system (KPSS) Global Clock Controller (GCC) ++ ++PROPERTIES ++ ++- compatible: ++ Usage: required ++ Value type: ++ Definition: should be one of: ++ "qcom,kpss-gcc" ++ ++- reg: ++ Usage: required ++ Value type: ++ Definition: base address and size of the register region ++ ++- clock-output-names: ++ Usage: required ++ Value type: ++ Definition: Name of the output clock. Typically acpu_l2_aux indicating ++ an L2 cache auxiliary clock. ++ ++Example: ++ ++ l2cc: clock-controller@2011000 { ++ compatible = "qcom,kpss-gcc"; ++ reg = <0x2011000 0x1000>; ++ clock-output-names = "acpu_l2_aux"; ++ }; +--- a/drivers/clk/qcom/Kconfig ++++ b/drivers/clk/qcom/Kconfig +@@ -205,6 +205,14 @@ config QCOM_HFPLL + Say Y if you want to support CPU frequency scaling on devices + such as MSM8974, APQ8084, etc. + ++config KPSS_XCC ++ tristate "KPSS Clock Controller" ++ depends on COMMON_CLK_QCOM ++ help ++ Support for the Krait ACC and GCC clock controllers. Say Y ++ if you want to support CPU frequency scaling on devices such ++ as MSM8960, APQ8064, etc. ++ + config KRAIT_CLOCKS + bool + select KRAIT_L2_ACCESSORS +--- a/drivers/clk/qcom/Makefile ++++ b/drivers/clk/qcom/Makefile +@@ -36,4 +36,5 @@ obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8 + obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o + obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o + obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o ++obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o + obj-$(CONFIG_QCOM_HFPLL) += hfpll.o +--- /dev/null ++++ b/drivers/clk/qcom/kpss-xcc.c +@@ -0,0 +1,96 @@ ++/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++static const char *aux_parents[] = { ++ "pll8_vote", ++ "pxo", ++}; ++ ++static unsigned int aux_parent_map[] = { ++ 3, ++ 0, ++}; ++ ++static const struct of_device_id kpss_xcc_match_table[] = { ++ { .compatible = "qcom,kpss-acc-v1", .data = (void *)1UL }, ++ { .compatible = "qcom,kpss-gcc" }, ++ {} ++}; ++MODULE_DEVICE_TABLE(of, kpss_xcc_match_table); ++ ++static int kpss_xcc_driver_probe(struct platform_device *pdev) ++{ ++ const struct of_device_id *id; ++ struct clk *clk; ++ struct resource *res; ++ void __iomem *base; ++ const char *name; ++ ++ id = of_match_device(kpss_xcc_match_table, &pdev->dev); ++ if (!id) ++ return -ENODEV; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ base = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(base)) ++ return PTR_ERR(base); ++ ++ if (id->data) { ++ if (of_property_read_string_index(pdev->dev.of_node, ++ "clock-output-names", ++ 0, &name)) ++ return -ENODEV; ++ base += 0x14; ++ } else { ++ name = "acpu_l2_aux"; ++ base += 0x28; ++ } ++ ++ clk = clk_register_mux_table(&pdev->dev, name, aux_parents, ++ ARRAY_SIZE(aux_parents), 0, base, 0, 0x3, ++ 0, aux_parent_map, NULL); ++ ++ platform_set_drvdata(pdev, clk); ++ ++ return PTR_ERR_OR_ZERO(clk); ++} ++ ++static int kpss_xcc_driver_remove(struct platform_device *pdev) ++{ ++ clk_unregister_mux(platform_get_drvdata(pdev)); ++ return 0; ++} ++ ++static struct platform_driver kpss_xcc_driver = { ++ .probe = kpss_xcc_driver_probe, ++ .remove = kpss_xcc_driver_remove, ++ .driver = { ++ .name = "kpss-xcc", ++ .of_match_table = kpss_xcc_match_table, ++ }, ++}; ++module_platform_driver(kpss_xcc_driver); ++ ++MODULE_DESCRIPTION("Krait Processor Sub System (KPSS) Clock Driver"); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:kpss-xcc"); diff --git a/target/linux/ipq806x/patches-4.14/0043-clk-qcom-Add-Krait-clock-controller-driver.patch b/target/linux/ipq806x/patches-4.14/0043-clk-qcom-Add-Krait-clock-controller-driver.patch new file mode 100644 index 0000000000..00bdcec456 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0043-clk-qcom-Add-Krait-clock-controller-driver.patch @@ -0,0 +1,436 @@ +From patchwork Fri Dec 8 09:42:27 2017 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v4,09/12] clk: qcom: Add Krait clock controller driver +From: Sricharan R +X-Patchwork-Id: 10102061 +Message-Id: <1512726150-7204-10-git-send-email-sricharan@codeaurora.org> +To: mturquette@baylibre.com, sboyd@codeaurora.org, + devicetree@vger.kernel.org, linux-pm@vger.kernel.org, + linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, + viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org +Cc: sricharan@codeaurora.org +Date: Fri, 8 Dec 2017 15:12:27 +0530 + +From: Stephen Boyd + +The Krait CPU clocks are made up of a primary mux and secondary +mux for each CPU and the L2, controlled via cp15 accessors. For +Kraits within KPSSv1 each secondary mux accepts a different aux +source, but on KPSSv2 each secondary mux accepts the same aux +source. + +Cc: +Signed-off-by: Stephen Boyd +--- + .../devicetree/bindings/clock/qcom,krait-cc.txt | 22 ++ + drivers/clk/qcom/Kconfig | 8 + + drivers/clk/qcom/Makefile | 1 + + drivers/clk/qcom/krait-cc.c | 350 +++++++++++++++++++++ + 4 files changed, 381 insertions(+) + create mode 100644 Documentation/devicetree/bindings/clock/qcom,krait-cc.txt + create mode 100644 drivers/clk/qcom/krait-cc.c + +--- /dev/null ++++ b/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt +@@ -0,0 +1,22 @@ ++Krait Clock Controller ++ ++PROPERTIES ++ ++- compatible: ++ Usage: required ++ Value type: ++ Definition: must be one of: ++ "qcom,krait-cc-v1" ++ "qcom,krait-cc-v2" ++ ++- #clock-cells: ++ Usage: required ++ Value type: ++ Definition: must be 1 ++ ++Example: ++ ++ kraitcc: clock-controller { ++ compatible = "qcom,krait-cc-v1"; ++ #clock-cells = <1>; ++ }; +--- a/drivers/clk/qcom/Kconfig ++++ b/drivers/clk/qcom/Kconfig +@@ -213,6 +213,14 @@ config KPSS_XCC + if you want to support CPU frequency scaling on devices such + as MSM8960, APQ8064, etc. + ++config KRAITCC ++ tristate "Krait Clock Controller" ++ depends on COMMON_CLK_QCOM && ARM ++ select KRAIT_CLOCKS ++ help ++ Support for the Krait CPU clocks on Qualcomm devices. ++ Say Y if you want to support CPU frequency scaling. ++ + config KRAIT_CLOCKS + bool + select KRAIT_L2_ACCESSORS +--- a/drivers/clk/qcom/Makefile ++++ b/drivers/clk/qcom/Makefile +@@ -38,3 +38,4 @@ obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o + obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o + obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o + obj-$(CONFIG_QCOM_HFPLL) += hfpll.o ++obj-$(CONFIG_KRAITCC) += krait-cc.o +--- /dev/null ++++ b/drivers/clk/qcom/krait-cc.c +@@ -0,0 +1,350 @@ ++/* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "clk-krait.h" ++ ++static unsigned int sec_mux_map[] = { ++ 2, ++ 0, ++}; ++ ++static unsigned int pri_mux_map[] = { ++ 1, ++ 2, ++ 0, ++}; ++ ++static int ++krait_add_div(struct device *dev, int id, const char *s, unsigned int offset) ++{ ++ struct krait_div2_clk *div; ++ struct clk_init_data init = { ++ .num_parents = 1, ++ .ops = &krait_div2_clk_ops, ++ .flags = CLK_SET_RATE_PARENT, ++ }; ++ const char *p_names[1]; ++ struct clk *clk; ++ ++ div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL); ++ if (!div) ++ return -ENOMEM; ++ ++ div->width = 2; ++ div->shift = 6; ++ div->lpl = id >= 0; ++ div->offset = offset; ++ div->hw.init = &init; ++ ++ init.name = kasprintf(GFP_KERNEL, "hfpll%s_div", s); ++ if (!init.name) ++ return -ENOMEM; ++ ++ init.parent_names = p_names; ++ p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s); ++ if (!p_names[0]) { ++ kfree(init.name); ++ return -ENOMEM; ++ } ++ ++ clk = devm_clk_register(dev, &div->hw); ++ kfree(p_names[0]); ++ kfree(init.name); ++ ++ return PTR_ERR_OR_ZERO(clk); ++} ++ ++static int ++krait_add_sec_mux(struct device *dev, int id, const char *s, ++ unsigned int offset, bool unique_aux) ++{ ++ struct krait_mux_clk *mux; ++ static const char *sec_mux_list[] = { ++ "acpu_aux", ++ "qsb", ++ }; ++ struct clk_init_data init = { ++ .parent_names = sec_mux_list, ++ .num_parents = ARRAY_SIZE(sec_mux_list), ++ .ops = &krait_mux_clk_ops, ++ .flags = CLK_SET_RATE_PARENT, ++ }; ++ struct clk *clk; ++ ++ mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); ++ if (!mux) ++ return -ENOMEM; ++ ++ mux->offset = offset; ++ mux->lpl = id >= 0; ++ mux->mask = 0x3; ++ mux->shift = 2; ++ mux->parent_map = sec_mux_map; ++ mux->hw.init = &init; ++ ++ init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s); ++ if (!init.name) ++ return -ENOMEM; ++ ++ if (unique_aux) { ++ sec_mux_list[0] = kasprintf(GFP_KERNEL, "acpu%s_aux", s); ++ if (!sec_mux_list[0]) { ++ clk = ERR_PTR(-ENOMEM); ++ goto err_aux; ++ } ++ } ++ ++ clk = devm_clk_register(dev, &mux->hw); ++ ++ if (unique_aux) ++ kfree(sec_mux_list[0]); ++err_aux: ++ kfree(init.name); ++ return PTR_ERR_OR_ZERO(clk); ++} ++ ++static struct clk * ++krait_add_pri_mux(struct device *dev, int id, const char *s, ++ unsigned int offset) ++{ ++ struct krait_mux_clk *mux; ++ const char *p_names[3]; ++ struct clk_init_data init = { ++ .parent_names = p_names, ++ .num_parents = ARRAY_SIZE(p_names), ++ .ops = &krait_mux_clk_ops, ++ .flags = CLK_SET_RATE_PARENT, ++ }; ++ struct clk *clk; ++ ++ mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); ++ if (!mux) ++ return ERR_PTR(-ENOMEM); ++ ++ mux->mask = 0x3; ++ mux->shift = 0; ++ mux->offset = offset; ++ mux->lpl = id >= 0; ++ mux->parent_map = pri_mux_map; ++ mux->hw.init = &init; ++ ++ init.name = kasprintf(GFP_KERNEL, "krait%s_pri_mux", s); ++ if (!init.name) ++ return ERR_PTR(-ENOMEM); ++ ++ p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s); ++ if (!p_names[0]) { ++ clk = ERR_PTR(-ENOMEM); ++ goto err_p0; ++ } ++ ++ p_names[1] = kasprintf(GFP_KERNEL, "hfpll%s_div", s); ++ if (!p_names[1]) { ++ clk = ERR_PTR(-ENOMEM); ++ goto err_p1; ++ } ++ ++ p_names[2] = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s); ++ if (!p_names[2]) { ++ clk = ERR_PTR(-ENOMEM); ++ goto err_p2; ++ } ++ ++ clk = devm_clk_register(dev, &mux->hw); ++ ++ kfree(p_names[2]); ++err_p2: ++ kfree(p_names[1]); ++err_p1: ++ kfree(p_names[0]); ++err_p0: ++ kfree(init.name); ++ return clk; ++} ++ ++/* id < 0 for L2, otherwise id == physical CPU number */ ++static struct clk *krait_add_clks(struct device *dev, int id, bool unique_aux) ++{ ++ int ret; ++ unsigned int offset; ++ void *p = NULL; ++ const char *s; ++ struct clk *clk; ++ ++ if (id >= 0) { ++ offset = 0x4501 + (0x1000 * id); ++ s = p = kasprintf(GFP_KERNEL, "%d", id); ++ if (!s) ++ return ERR_PTR(-ENOMEM); ++ } else { ++ offset = 0x500; ++ s = "_l2"; ++ } ++ ++ ret = krait_add_div(dev, id, s, offset); ++ if (ret) { ++ clk = ERR_PTR(ret); ++ goto err; ++ } ++ ++ ret = krait_add_sec_mux(dev, id, s, offset, unique_aux); ++ if (ret) { ++ clk = ERR_PTR(ret); ++ goto err; ++ } ++ ++ clk = krait_add_pri_mux(dev, id, s, offset); ++err: ++ kfree(p); ++ return clk; ++} ++ ++static struct clk *krait_of_get(struct of_phandle_args *clkspec, void *data) ++{ ++ unsigned int idx = clkspec->args[0]; ++ struct clk **clks = data; ++ ++ if (idx >= 5) { ++ pr_err("%s: invalid clock index %d\n", __func__, idx); ++ return ERR_PTR(-EINVAL); ++ } ++ ++ return clks[idx] ? : ERR_PTR(-ENODEV); ++} ++ ++static const struct of_device_id krait_cc_match_table[] = { ++ { .compatible = "qcom,krait-cc-v1", (void *)1UL }, ++ { .compatible = "qcom,krait-cc-v2" }, ++ {} ++}; ++MODULE_DEVICE_TABLE(of, krait_cc_match_table); ++ ++static int krait_cc_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ const struct of_device_id *id; ++ unsigned long cur_rate, aux_rate; ++ int cpu; ++ struct clk *clk; ++ struct clk **clks; ++ struct clk *l2_pri_mux_clk; ++ ++ id = of_match_device(krait_cc_match_table, dev); ++ if (!id) ++ return -ENODEV; ++ ++ /* Rate is 1 because 0 causes problems for __clk_mux_determine_rate */ ++ clk = clk_register_fixed_rate(dev, "qsb", NULL, 0, 1); ++ if (IS_ERR(clk)) ++ return PTR_ERR(clk); ++ ++ if (!id->data) { ++ clk = clk_register_fixed_factor(dev, "acpu_aux", ++ "gpll0_vote", 0, 1, 2); ++ if (IS_ERR(clk)) ++ return PTR_ERR(clk); ++ } ++ ++ /* Krait configurations have at most 4 CPUs and one L2 */ ++ clks = devm_kcalloc(dev, 5, sizeof(*clks), GFP_KERNEL); ++ if (!clks) ++ return -ENOMEM; ++ ++ for_each_possible_cpu(cpu) { ++ clk = krait_add_clks(dev, cpu, id->data); ++ if (IS_ERR(clk)) ++ return PTR_ERR(clk); ++ clks[cpu] = clk; ++ } ++ ++ l2_pri_mux_clk = krait_add_clks(dev, -1, id->data); ++ if (IS_ERR(l2_pri_mux_clk)) ++ return PTR_ERR(l2_pri_mux_clk); ++ clks[4] = l2_pri_mux_clk; ++ ++ /* ++ * We don't want the CPU or L2 clocks to be turned off at late init ++ * if CPUFREQ or HOTPLUG configs are disabled. So, bump up the ++ * refcount of these clocks. Any cpufreq/hotplug manager can assume ++ * that the clocks have already been prepared and enabled by the time ++ * they take over. ++ */ ++ for_each_online_cpu(cpu) { ++ clk_prepare_enable(l2_pri_mux_clk); ++ WARN(clk_prepare_enable(clks[cpu]), ++ "Unable to turn on CPU%d clock", cpu); ++ } ++ ++ /* ++ * Force reinit of HFPLLs and muxes to overwrite any potential ++ * incorrect configuration of HFPLLs and muxes by the bootloader. ++ * While at it, also make sure the cores are running at known rates ++ * and print the current rate. ++ * ++ * The clocks are set to aux clock rate first to make sure the ++ * secondary mux is not sourcing off of QSB. The rate is then set to ++ * two different rates to force a HFPLL reinit under all ++ * circumstances. ++ */ ++ cur_rate = clk_get_rate(l2_pri_mux_clk); ++ aux_rate = 384000000; ++ if (cur_rate == 1) { ++ pr_info("L2 @ QSB rate. Forcing new rate.\n"); ++ cur_rate = aux_rate; ++ } ++ clk_set_rate(l2_pri_mux_clk, aux_rate); ++ clk_set_rate(l2_pri_mux_clk, 2); ++ clk_set_rate(l2_pri_mux_clk, cur_rate); ++ pr_info("L2 @ %lu KHz\n", clk_get_rate(l2_pri_mux_clk) / 1000); ++ for_each_possible_cpu(cpu) { ++ clk = clks[cpu]; ++ cur_rate = clk_get_rate(clk); ++ if (cur_rate == 1) { ++ pr_info("CPU%d @ QSB rate. Forcing new rate.\n", cpu); ++ cur_rate = aux_rate; ++ } ++ ++ clk_set_rate(clk, aux_rate); ++ clk_set_rate(clk, 2); ++ clk_set_rate(clk, cur_rate); ++ pr_info("CPU%d @ %lu KHz\n", cpu, clk_get_rate(clk) / 1000); ++ } ++ ++ of_clk_add_provider(dev->of_node, krait_of_get, clks); ++ ++ return 0; ++} ++ ++static struct platform_driver krait_cc_driver = { ++ .probe = krait_cc_probe, ++ .driver = { ++ .name = "krait-cc", ++ .of_match_table = krait_cc_match_table, ++ }, ++}; ++module_platform_driver(krait_cc_driver); ++ ++MODULE_DESCRIPTION("Krait CPU Clock Driver"); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:krait-cc"); diff --git a/target/linux/ipq806x/patches-4.14/0044-clk-Add-safe-switch-hook.patch b/target/linux/ipq806x/patches-4.14/0044-clk-Add-safe-switch-hook.patch new file mode 100644 index 0000000000..b2468a9609 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0044-clk-Add-safe-switch-hook.patch @@ -0,0 +1,160 @@ +From patchwork Fri Dec 8 09:42:28 2017 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v4,10/12] clk: qcom: Add safe switch hook for krait mux clocks +From: Sricharan R +X-Patchwork-Id: 10102057 +Message-Id: <1512726150-7204-11-git-send-email-sricharan@codeaurora.org> +To: mturquette@baylibre.com, sboyd@codeaurora.org, + devicetree@vger.kernel.org, linux-pm@vger.kernel.org, + linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, + viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org +Cc: sricharan@codeaurora.org +Date: Fri, 8 Dec 2017 15:12:28 +0530 + +When the Hfplls are reprogrammed during the rate change, +the primary muxes which are sourced from the same hfpll +for higher frequencies, needs to be switched to the 'safe +secondary mux' as the parent for that small window. This +is done by registering a clk notifier for the muxes and +switching to the safe parent in the PRE_RATE_CHANGE notifier +and back to the original parent in the POST_RATE_CHANGE notifier. + +Signed-off-by: Sricharan R +--- + drivers/clk/qcom/clk-krait.c | 2 ++ + drivers/clk/qcom/clk-krait.h | 3 +++ + drivers/clk/qcom/krait-cc.c | 56 ++++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 61 insertions(+) + +--- a/drivers/clk/qcom/clk-krait.c ++++ b/drivers/clk/qcom/clk-krait.c +@@ -60,6 +60,8 @@ static int krait_mux_set_parent(struct c + if (__clk_is_enabled(hw->clk)) + __krait_mux_set_sel(mux, sel); + ++ mux->reparent = true; ++ + return 0; + } + +--- a/drivers/clk/qcom/clk-krait.h ++++ b/drivers/clk/qcom/clk-krait.h +@@ -23,6 +23,9 @@ struct krait_mux_clk { + u32 shift; + u32 en_mask; + bool lpl; ++ u8 safe_sel; ++ u8 old_index; ++ bool reparent; + + struct clk_hw hw; + struct notifier_block clk_nb; +--- a/drivers/clk/qcom/krait-cc.c ++++ b/drivers/clk/qcom/krait-cc.c +@@ -35,6 +35,49 @@ static unsigned int pri_mux_map[] = { + 0, + }; + ++/* ++ * Notifier function for switching the muxes to safe parent ++ * while the hfpll is getting reprogrammed. ++ */ ++static int krait_notifier_cb(struct notifier_block *nb, ++ unsigned long event, ++ void *data) ++{ ++ int ret = 0; ++ struct krait_mux_clk *mux = container_of(nb, struct krait_mux_clk, ++ clk_nb); ++ /* Switch to safe parent */ ++ if (event == PRE_RATE_CHANGE) { ++ mux->old_index = krait_mux_clk_ops.get_parent(&mux->hw); ++ ret = krait_mux_clk_ops.set_parent(&mux->hw, mux->safe_sel); ++ mux->reparent = false; ++ /* ++ * By the time POST_RATE_CHANGE notifier is called, ++ * clk framework itself would have changed the parent for the new rate. ++ * Only otherwise, put back to the old parent. ++ */ ++ } else if (event == POST_RATE_CHANGE) { ++ if (!mux->reparent) ++ ret = krait_mux_clk_ops.set_parent(&mux->hw, ++ mux->old_index); ++ } ++ ++ return notifier_from_errno(ret); ++} ++ ++static int krait_notifier_register(struct device *dev, struct clk *clk, ++ struct krait_mux_clk *mux) ++{ ++ int ret = 0; ++ ++ mux->clk_nb.notifier_call = krait_notifier_cb; ++ ret = clk_notifier_register(clk, &mux->clk_nb); ++ if (ret) ++ dev_err(dev, "failed to register clock notifier: %d\n", ret); ++ ++ return ret; ++} ++ + static int + krait_add_div(struct device *dev, int id, const char *s, unsigned int offset) + { +@@ -79,6 +122,7 @@ static int + krait_add_sec_mux(struct device *dev, int id, const char *s, + unsigned int offset, bool unique_aux) + { ++ int ret; + struct krait_mux_clk *mux; + static const char *sec_mux_list[] = { + "acpu_aux", +@@ -102,6 +146,7 @@ krait_add_sec_mux(struct device *dev, in + mux->shift = 2; + mux->parent_map = sec_mux_map; + mux->hw.init = &init; ++ mux->safe_sel = 0; + + init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s); + if (!init.name) +@@ -117,6 +162,11 @@ krait_add_sec_mux(struct device *dev, in + + clk = devm_clk_register(dev, &mux->hw); + ++ ret = krait_notifier_register(dev, clk, mux); ++ if (ret) ++ goto unique_aux; ++ ++unique_aux: + if (unique_aux) + kfree(sec_mux_list[0]); + err_aux: +@@ -128,6 +178,7 @@ static struct clk * + krait_add_pri_mux(struct device *dev, int id, const char *s, + unsigned int offset) + { ++ int ret; + struct krait_mux_clk *mux; + const char *p_names[3]; + struct clk_init_data init = { +@@ -148,6 +199,7 @@ krait_add_pri_mux(struct device *dev, in + mux->lpl = id >= 0; + mux->parent_map = pri_mux_map; + mux->hw.init = &init; ++ mux->safe_sel = 2; + + init.name = kasprintf(GFP_KERNEL, "krait%s_pri_mux", s); + if (!init.name) +@@ -173,6 +225,10 @@ krait_add_pri_mux(struct device *dev, in + + clk = devm_clk_register(dev, &mux->hw); + ++ ret = krait_notifier_register(dev, clk, mux); ++ if (ret) ++ goto err_p3; ++err_p3: + kfree(p_names[2]); + err_p2: + kfree(p_names[1]); diff --git a/target/linux/ipq806x/patches-4.14/0045-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch b/target/linux/ipq806x/patches-4.14/0045-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch new file mode 100644 index 0000000000..b894173d5e --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0045-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch @@ -0,0 +1,307 @@ +From patchwork Fri Dec 8 09:42:29 2017 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v4,11/12] cpufreq: Add module to register cpufreq on Krait CPUs +From: Sricharan R +X-Patchwork-Id: 10102075 +Message-Id: <1512726150-7204-12-git-send-email-sricharan@codeaurora.org> +To: mturquette@baylibre.com, sboyd@codeaurora.org, + devicetree@vger.kernel.org, linux-pm@vger.kernel.org, + linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, + viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org +Cc: sricharan@codeaurora.org +Date: Fri, 8 Dec 2017 15:12:29 +0530 + +From: Stephen Boyd + +Register a cpufreq-generic device whenever we detect that a +"qcom,krait" compatible CPU is present in DT. + +Cc: +Signed-off-by: Stephen Boyd +--- + .../devicetree/bindings/arm/msm/qcom,pvs.txt | 38 ++++ + drivers/cpufreq/Kconfig.arm | 9 + + drivers/cpufreq/Makefile | 1 + + drivers/cpufreq/qcom-cpufreq.c | 204 +++++++++++++++++++++ + 4 files changed, 252 insertions(+) + create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,pvs.txt + create mode 100644 drivers/cpufreq/qcom-cpufreq.c + +--- /dev/null ++++ b/Documentation/devicetree/bindings/arm/msm/qcom,pvs.txt +@@ -0,0 +1,38 @@ ++Qualcomm Process Voltage Scaling Tables ++ ++The node name is required to be "qcom,pvs". There shall only be one ++such node present in the root of the tree. ++ ++PROPERTIES ++ ++- qcom,pvs-format-a or qcom,pvs-format-b: ++ Usage: required ++ Value type: ++ Definition: Indicates the format of qcom,speedX-pvsY-bin-vZ properties. ++ If qcom,pvs-format-a is used the table is two columns ++ (frequency and voltage in that order). If qcom,pvs-format-b is used the table is three columns (frequency, voltage, ++ and current in that order). ++ ++- qcom,speedX-pvsY-bin-vZ: ++ Usage: required ++ Value type: ++ Definition: The PVS table corresponding to the speed bin X, pvs bin Y, ++ and version Z. ++Example: ++ ++ qcom,pvs { ++ qcom,pvs-format-a; ++ qcom,speed0-pvs0-bin-v0 = ++ < 384000000 950000 >, ++ < 486000000 975000 >, ++ < 594000000 1000000 >, ++ < 702000000 1025000 >, ++ < 810000000 1075000 >, ++ < 918000000 1100000 >, ++ < 1026000000 1125000 >, ++ < 1134000000 1175000 >, ++ < 1242000000 1200000 >, ++ < 1350000000 1225000 >, ++ < 1458000000 1237500 >, ++ < 1512000000 1250000 >; ++ }; +--- a/drivers/cpufreq/Kconfig.arm ++++ b/drivers/cpufreq/Kconfig.arm +@@ -100,6 +100,15 @@ config ARM_OMAP2PLUS_CPUFREQ + depends on ARCH_OMAP2PLUS + default ARCH_OMAP2PLUS + ++config ARM_QCOM_CPUFREQ ++ tristate "Qualcomm based" ++ depends on ARCH_QCOM ++ select PM_OPP ++ help ++ This adds the CPUFreq driver for Qualcomm SoC based boards. ++ ++ If in doubt, say N. ++ + config ARM_S3C_CPUFREQ + bool + help +--- a/drivers/cpufreq/Makefile ++++ b/drivers/cpufreq/Makefile +@@ -62,6 +62,7 @@ obj-$(CONFIG_ARM_MT8173_CPUFREQ) += mt81 + obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o + obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o + obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o ++obj-$(CONFIG_ARM_QCOM_CPUFREQ) += qcom-cpufreq.o + obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o + obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o + obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o +--- /dev/null ++++ b/drivers/cpufreq/qcom-cpufreq.c +@@ -0,0 +1,204 @@ ++/* Copyright (c) 2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include "cpufreq-dt.h" ++ ++static void __init get_krait_bin_format_a(int *speed, int *pvs, int *pvs_ver) ++{ ++ void __iomem *base; ++ u32 pte_efuse; ++ ++ *speed = *pvs = *pvs_ver = 0; ++ ++ base = ioremap(0x007000c0, 4); ++ if (!base) { ++ pr_warn("Unable to read efuse data. Defaulting to 0!\n"); ++ return; ++ } ++ ++ pte_efuse = readl_relaxed(base); ++ iounmap(base); ++ ++ *speed = pte_efuse & 0xf; ++ if (*speed == 0xf) ++ *speed = (pte_efuse >> 4) & 0xf; ++ ++ if (*speed == 0xf) { ++ *speed = 0; ++ pr_warn("Speed bin: Defaulting to %d\n", *speed); ++ } else { ++ pr_info("Speed bin: %d\n", *speed); ++ } ++ ++ *pvs = (pte_efuse >> 10) & 0x7; ++ if (*pvs == 0x7) ++ *pvs = (pte_efuse >> 13) & 0x7; ++ ++ if (*pvs == 0x7) { ++ *pvs = 0; ++ pr_warn("PVS bin: Defaulting to %d\n", *pvs); ++ } else { ++ pr_info("PVS bin: %d\n", *pvs); ++ } ++} ++ ++static void __init get_krait_bin_format_b(int *speed, int *pvs, int *pvs_ver) ++{ ++ u32 pte_efuse, redundant_sel; ++ void __iomem *base; ++ ++ *speed = 0; ++ *pvs = 0; ++ *pvs_ver = 0; ++ ++ base = ioremap(0xfc4b80b0, 8); ++ if (!base) { ++ pr_warn("Unable to read efuse data. Defaulting to 0!\n"); ++ return; ++ } ++ ++ pte_efuse = readl_relaxed(base); ++ redundant_sel = (pte_efuse >> 24) & 0x7; ++ *speed = pte_efuse & 0x7; ++ /* 4 bits of PVS are in efuse register bits 31, 8-6. */ ++ *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7); ++ *pvs_ver = (pte_efuse >> 4) & 0x3; ++ ++ switch (redundant_sel) { ++ case 1: ++ *speed = (pte_efuse >> 27) & 0xf; ++ break; ++ case 2: ++ *pvs = (pte_efuse >> 27) & 0xf; ++ break; ++ } ++ ++ /* Check SPEED_BIN_BLOW_STATUS */ ++ if (pte_efuse & BIT(3)) { ++ pr_info("Speed bin: %d\n", *speed); ++ } else { ++ pr_warn("Speed bin not set. Defaulting to 0!\n"); ++ *speed = 0; ++ } ++ ++ /* Check PVS_BLOW_STATUS */ ++ pte_efuse = readl_relaxed(base + 0x4) & BIT(21); ++ if (pte_efuse) { ++ pr_info("PVS bin: %d\n", *pvs); ++ } else { ++ pr_warn("PVS bin not set. Defaulting to 0!\n"); ++ *pvs = 0; ++ } ++ ++ pr_info("PVS version: %d\n", *pvs_ver); ++ iounmap(base); ++} ++ ++static int __init qcom_cpufreq_populate_opps(void) ++{ ++ int len, rows, cols, i, k, speed, pvs, pvs_ver; ++ char table_name[] = "qcom,speedXX-pvsXX-bin-vXX"; ++ struct device_node *np; ++ struct device *dev; ++ int cpu = 0; ++ ++ np = of_find_node_by_name(NULL, "qcom,pvs"); ++ if (!np) ++ return -ENODEV; ++ ++ if (of_property_read_bool(np, "qcom,pvs-format-a")) { ++ get_krait_bin_format_a(&speed, &pvs, &pvs_ver); ++ cols = 2; ++ } else if (of_property_read_bool(np, "qcom,pvs-format-b")) { ++ get_krait_bin_format_b(&speed, &pvs, &pvs_ver); ++ cols = 3; ++ } else { ++ return -ENODEV; ++ } ++ ++ snprintf(table_name, sizeof(table_name), ++ "qcom,speed%d-pvs%d-bin-v%d", speed, pvs, pvs_ver); ++ ++ if (!of_find_property(np, table_name, &len)) ++ return -EINVAL; ++ ++ len /= sizeof(u32); ++ if (len % cols || len == 0) ++ return -EINVAL; ++ ++ rows = len / cols; ++ ++ for (i = 0, k = 0; i < rows; i++) { ++ u32 freq, volt; ++ ++ of_property_read_u32_index(np, table_name, k++, &freq); ++ of_property_read_u32_index(np, table_name, k++, &volt); ++ while (k % cols) ++ k++; /* Skip uA entries if present */ ++ for (cpu = 0; cpu < num_possible_cpus(); cpu++) { ++ dev = get_cpu_device(cpu); ++ if (!dev) ++ return -ENODEV; ++ if (dev_pm_opp_add(dev, freq, volt)) ++ pr_warn("failed to add OPP %u\n", freq); ++ } ++ } ++ ++ return 0; ++} ++ ++static int __init qcom_cpufreq_driver_init(void) ++{ ++ struct cpufreq_dt_platform_data pdata = { .independent_clocks = true }; ++ struct platform_device_info devinfo = { ++ .name = "cpufreq-dt", ++ .data = &pdata, ++ .size_data = sizeof(pdata), ++ }; ++ struct device *cpu_dev; ++ struct device_node *np; ++ int ret; ++ ++ cpu_dev = get_cpu_device(0); ++ if (!cpu_dev) ++ return -ENODEV; ++ ++ np = of_node_get(cpu_dev->of_node); ++ if (!np) ++ return -ENOENT; ++ ++ if (!of_device_is_compatible(np, "qcom,krait")) { ++ of_node_put(np); ++ return -ENODEV; ++ } ++ of_node_put(np); ++ ++ ret = qcom_cpufreq_populate_opps(); ++ if (ret) ++ return ret; ++ ++ return PTR_ERR_OR_ZERO(platform_device_register_full(&devinfo)); ++} ++module_init(qcom_cpufreq_driver_init); ++ ++MODULE_DESCRIPTION("Qualcomm CPUfreq driver"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ipq806x/patches-4.14/0046-cpufreq-qcom-independent-core-clocks.patch b/target/linux/ipq806x/patches-4.14/0046-cpufreq-qcom-independent-core-clocks.patch new file mode 100644 index 0000000000..d7211e1559 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0046-cpufreq-qcom-independent-core-clocks.patch @@ -0,0 +1,65 @@ +From patchwork Fri Dec 8 09:42:30 2017 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v4,12/12] cpufreq: dt: Reintroduce independent_clocks platform data +From: Sricharan R +X-Patchwork-Id: 10102073 +Message-Id: <1512726150-7204-13-git-send-email-sricharan@codeaurora.org> +To: mturquette@baylibre.com, sboyd@codeaurora.org, + devicetree@vger.kernel.org, linux-pm@vger.kernel.org, + linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, + viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org +Cc: sricharan@codeaurora.org +Date: Fri, 8 Dec 2017 15:12:30 +0530 + +The Platform data was removed earlier by, +'commit eb96924acddc ("cpufreq: dt: Kill platform-data")' +since there were no users at that time. +Now this is required when the each of the cpu clocks +can be scaled independently, which is the case +for krait cores. So reintroduce it. + +Signed-off-by: Sricharan R +--- + drivers/cpufreq/cpufreq-dt.c | 7 ++++++- + drivers/cpufreq/cpufreq-dt.h | 6 ++++++ + 2 files changed, 12 insertions(+), 1 deletion(-) + +--- a/drivers/cpufreq/cpufreq-dt.c ++++ b/drivers/cpufreq/cpufreq-dt.c +@@ -220,7 +220,10 @@ static int cpufreq_init(struct cpufreq_p + } + + if (fallback) { +- cpumask_setall(policy->cpus); ++ struct cpufreq_dt_platform_data *pd = cpufreq_get_driver_data(); ++ ++ if (!pd || !pd->independent_clocks) ++ cpumask_setall(policy->cpus); + + /* + * OPP tables are initialized only for policy->cpu, do it for +@@ -372,6 +375,8 @@ static int dt_cpufreq_probe(struct platf + if (data && data->have_governor_per_policy) + dt_cpufreq_driver.flags |= CPUFREQ_HAVE_GOVERNOR_PER_POLICY; + ++ dt_cpufreq_driver.driver_data = data; ++ + ret = cpufreq_register_driver(&dt_cpufreq_driver); + if (ret) + dev_err(&pdev->dev, "failed register driver: %d\n", ret); +--- a/drivers/cpufreq/cpufreq-dt.h ++++ b/drivers/cpufreq/cpufreq-dt.h +@@ -13,6 +13,12 @@ + #include + + struct cpufreq_dt_platform_data { ++ /* ++ * True when each CPU has its own clock to control its ++ * frequency, false when all CPUs are controlled by a single ++ * clock. ++ */ ++ bool independent_clocks; + bool have_governor_per_policy; + }; diff --git a/target/linux/ipq806x/patches-4.14/0047-mtd-nand-Create-a-BBT-flag-to-access-bad-block-marke.patch b/target/linux/ipq806x/patches-4.14/0047-mtd-nand-Create-a-BBT-flag-to-access-bad-block-marke.patch new file mode 100644 index 0000000000..4c271d71fa --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0047-mtd-nand-Create-a-BBT-flag-to-access-bad-block-marke.patch @@ -0,0 +1,72 @@ +From c7c6a0f50f9ac3620c611ce06ba1f9fafea0444e Mon Sep 17 00:00:00 2001 +From: Archit Taneja +Date: Mon, 3 Aug 2015 10:38:14 +0530 +Subject: [PATCH 47/69] mtd: nand: Create a BBT flag to access bad block + markers in raw mode + +Some controllers can access the factory bad block marker from OOB only +when they read it in raw mode. When ECC is enabled, these controllers +discard reading/writing bad block markers, preventing access to them +altogether. + +The bbt driver assumes MTD_OPS_PLACE_OOB when scanning for bad blocks. +This results in the nand driver's ecc->read_oob() op to be called, which +works with ECC enabled. + +Create a new BBT option flag that tells nand_bbt to force the mode to +MTD_OPS_RAW. This would result in the correct op being called for the +underlying nand controller driver. + +Reviewed-by: Andy Gross +Signed-off-by: Archit Taneja +--- + drivers/mtd/nand/nand_base.c | 6 +++++- + drivers/mtd/nand/nand_bbt.c | 6 +++++- + include/linux/mtd/bbm.h | 6 ++++++ + 3 files changed, 16 insertions(+), 2 deletions(-) + +--- a/drivers/mtd/nand/nand_base.c ++++ b/drivers/mtd/nand/nand_base.c +@@ -481,7 +481,11 @@ static int nand_default_block_markbad(st + } else { + ops.len = ops.ooblen = 1; + } +- ops.mode = MTD_OPS_PLACE_OOB; ++ ++ if (unlikely(chip->bbt_options & NAND_BBT_ACCESS_BBM_RAW)) ++ ops.mode = MTD_OPS_RAW; ++ else ++ ops.mode = MTD_OPS_PLACE_OOB; + + /* Write to first/last page(s) if necessary */ + if (chip->bbt_options & NAND_BBT_SCANLASTPAGE) +--- a/drivers/mtd/nand/nand_bbt.c ++++ b/drivers/mtd/nand/nand_bbt.c +@@ -420,7 +420,11 @@ static int scan_block_fast(struct mtd_in + ops.oobbuf = buf; + ops.ooboffs = 0; + ops.datbuf = NULL; +- ops.mode = MTD_OPS_PLACE_OOB; ++ ++ if (unlikely(bd->options & NAND_BBT_ACCESS_BBM_RAW)) ++ ops.mode = MTD_OPS_RAW; ++ else ++ ops.mode = MTD_OPS_PLACE_OOB; + + for (j = 0; j < numpages; j++) { + /* +--- a/include/linux/mtd/bbm.h ++++ b/include/linux/mtd/bbm.h +@@ -116,6 +116,12 @@ struct nand_bbt_descr { + #define NAND_BBT_NO_OOB_BBM 0x00080000 + + /* ++ * Force MTD_OPS_RAW mode when trying to access bad block markes from OOB. To ++ * be used by controllers which can access BBM only when ECC is disabled, i.e, ++ * when in RAW access mode ++ */ ++#define NAND_BBT_ACCESS_BBM_RAW 0x00100000 ++/* + * Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr + * was allocated dynamicaly and must be freed in nand_release(). Has no meaning + * in nand_chip.bbt_options. diff --git a/target/linux/ipq806x/patches-4.14/0048-PM-OPP-HACK-Allow-to-set-regulator-without-opp_list.patch b/target/linux/ipq806x/patches-4.14/0048-PM-OPP-HACK-Allow-to-set-regulator-without-opp_list.patch new file mode 100644 index 0000000000..be39ad2373 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0048-PM-OPP-HACK-Allow-to-set-regulator-without-opp_list.patch @@ -0,0 +1,26 @@ +From 5c294df1715d673f94f3b0a6e1ea3a426ca35e6e Mon Sep 17 00:00:00 2001 +From: Georgi Djakov +Date: Thu, 28 Apr 2016 16:20:12 +0300 +Subject: [PATCH 48/69] PM / OPP: HACK: Allow to set regulator without opp_list + +Signed-off-by: Georgi Djakov +--- + drivers/base/power/opp/core.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/drivers/base/power/opp/core.c ++++ b/drivers/base/power/opp/core.c +@@ -1277,11 +1277,13 @@ + if (!opp_table) + return ERR_PTR(-ENOMEM); + ++#if 0 + /* This should be called before OPPs are initialized */ + if (WARN_ON(!list_empty(&opp_table->opp_list))) { + ret = -EBUSY; + goto err; + } ++#endif + + /* Already have regulators set */ + if (opp_table->regulators) { diff --git a/target/linux/ipq806x/patches-4.14/0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch b/target/linux/ipq806x/patches-4.14/0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch new file mode 100644 index 0000000000..2ab46e176e --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch @@ -0,0 +1,147 @@ +From c949f08cf20fe82971fbdb4015daa38210da492e Mon Sep 17 00:00:00 2001 +From: Stephen Boyd +Date: Fri, 18 Sep 2015 17:52:06 -0700 +Subject: [PATCH 49/69] PM / OPP: Support adjusting OPP voltages at runtime + +On some SoCs the Adaptive Voltage Scaling (AVS) technique is +employed to optimize the operating voltage of a device. At a +given frequency, the hardware monitors dynamic factors and either +makes a suggestion for how much to adjust a voltage for the +current frequency, or it automatically adjusts the voltage +without software intervention. Add an API to the OPP library for +the former case, so that AVS type devices can update the voltages +for an OPP when the hardware determines the voltage should +change. The assumption is that drivers like CPUfreq or devfreq +will register for the OPP notifiers and adjust the voltage +according to suggestions that AVS makes. + +Cc: Nishanth Menon +Acked-by: Viresh Kumar +Signed-off-by: Stephen Boyd +Acked-by: Viresh Kumar +Signed-off-by: Georgi Djakov +--- + drivers/base/power/opp/core.c | 77 +++++++++++++++++++++++++++++++++++++++++++ + include/linux/pm_opp.h | 11 +++++++ + 2 files changed, 88 insertions(+) + +--- a/drivers/base/power/opp/core.c ++++ b/drivers/base/power/opp/core.c +@@ -1605,6 +1605,83 @@ unlock: + } + + /** ++ * dev_pm_opp_adjust_voltage() - helper to change the voltage of an OPP ++ * @dev: device for which we do this operation ++ * @freq: OPP frequency to adjust voltage of ++ * @u_volt: new OPP voltage ++ * ++ * Change the voltage of an OPP with an RCU operation. ++ * ++ * Return: -EINVAL for bad pointers, -ENOMEM if no memory available for the ++ * copy operation, returns 0 if no modifcation was done OR modification was ++ * successful. ++ * ++ * Locking: The internal device_opp and opp structures are RCU protected. ++ * Hence this function internally uses RCU updater strategy with mutex locks to ++ * keep the integrity of the internal data structures. Callers should ensure ++ * that this function is *NOT* called under RCU protection or in contexts where ++ * mutex locking or synchronize_rcu() blocking calls cannot be used. ++ */ ++int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq, ++ unsigned long u_volt) ++{ ++ struct opp_table *opp_table; ++ struct dev_pm_opp *new_opp, *tmp_opp, *opp = ERR_PTR(-ENODEV); ++ int r = 0; ++ ++ /* keep the node allocated */ ++ new_opp = kmalloc(sizeof(*new_opp), GFP_KERNEL); ++ if (!new_opp) ++ return -ENOMEM; ++ ++ mutex_lock(&opp_table_lock); ++ ++ /* Find the opp_table */ ++ opp_table = _find_opp_table(dev); ++ if (IS_ERR(opp_table)) { ++ r = PTR_ERR(opp_table); ++ dev_warn(dev, "%s: Device OPP not found (%d)\n", __func__, r); ++ goto unlock; ++ } ++ ++ /* Do we have the frequency? */ ++ list_for_each_entry(tmp_opp, &opp_table->opp_list, node) { ++ if (tmp_opp->rate == freq) { ++ opp = tmp_opp; ++ break; ++ } ++ } ++ if (IS_ERR(opp)) { ++ r = PTR_ERR(opp); ++ goto unlock; ++ } ++ ++ /* Is update really needed? */ ++ if (opp->supplies[0].u_volt == u_volt) ++ goto unlock; ++ /* copy the old data over */ ++ *new_opp = *opp; ++ ++ /* plug in new node */ ++ new_opp->supplies[0].u_volt = u_volt; ++ ++ list_replace(&opp->node, &new_opp->node); ++ mutex_unlock(&opp_table_lock); ++ kfree(opp); ++ ++ /* Notify the change of the OPP */ ++ blocking_notifier_call_chain(&opp_table->head, OPP_EVENT_ADJUST_VOLTAGE, ++ new_opp); ++ ++ return 0; ++ ++unlock: ++ mutex_unlock(&opp_table_lock); ++ kfree(new_opp); ++ return r; ++} ++ ++/** + * dev_pm_opp_enable() - Enable a specific OPP + * @dev: device for which we do this operation + * @freq: OPP frequency to enable +--- a/include/linux/pm_opp.h ++++ b/include/linux/pm_opp.h +@@ -25,6 +25,7 @@ struct opp_table; + + enum dev_pm_opp_event { + OPP_EVENT_ADD, OPP_EVENT_REMOVE, OPP_EVENT_ENABLE, OPP_EVENT_DISABLE, ++ OPP_EVENT_ADJUST_VOLTAGE, + }; + + /** +@@ -108,6 +109,9 @@ int dev_pm_opp_add(struct device *dev, u + unsigned long u_volt); + void dev_pm_opp_remove(struct device *dev, unsigned long freq); + ++int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq, ++ unsigned long u_volt); ++ + int dev_pm_opp_enable(struct device *dev, unsigned long freq); + + int dev_pm_opp_disable(struct device *dev, unsigned long freq); +@@ -208,6 +212,13 @@ static inline void dev_pm_opp_remove(str + { + } + ++static inline int ++dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq, ++ unsigned long u_volt) ++{ ++ return 0; ++} ++ + static inline int dev_pm_opp_enable(struct device *dev, unsigned long freq) + { + return 0; diff --git a/target/linux/ipq806x/patches-4.14/0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch b/target/linux/ipq806x/patches-4.14/0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch new file mode 100644 index 0000000000..f0705badb2 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch @@ -0,0 +1,51 @@ +From d06ca5e7a3cf726f5be5ffd96e93ccd798b8c09a Mon Sep 17 00:00:00 2001 +From: Georgi Djakov +Date: Thu, 12 May 2016 14:41:33 +0300 +Subject: [PATCH 51/69] PM / OPP: Add a helper to get an opp regulator for + device + +Signed-off-by: Georgi Djakov +--- + drivers/base/power/opp/core.c | 21 +++++++++++++++++++++ + include/linux/pm_opp.h | 1 + + 2 files changed, 22 insertions(+) + +--- a/drivers/base/power/opp/core.c ++++ b/drivers/base/power/opp/core.c +@@ -126,6 +126,27 @@ unsigned long dev_pm_opp_get_freq(struct + } + EXPORT_SYMBOL_GPL(dev_pm_opp_get_freq); + ++struct regulator *dev_pm_opp_get_regulator(struct device *dev) ++{ ++ struct opp_table *opp_table; ++ struct regulator *reg; ++ ++ rcu_read_lock(); ++ ++ opp_table = _find_opp_table(dev); ++ if (IS_ERR(opp_table)) { ++ rcu_read_unlock(); ++ return ERR_CAST(opp_table); ++ } ++ ++ reg = opp_table->regulators[0]; ++ ++ rcu_read_unlock(); ++ ++ return reg; ++} ++EXPORT_SYMBOL_GPL(dev_pm_opp_get_regulator); ++ + /** + * dev_pm_opp_is_turbo() - Returns if opp is turbo OPP or not + * @opp: opp for which turbo mode is being verified +--- a/include/linux/pm_opp.h ++++ b/include/linux/pm_opp.h +@@ -85,6 +85,7 @@ enum dev_pm_opp_event { + unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp); + + unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp); ++struct regulator *dev_pm_opp_get_regulator(struct device *dev); + + bool dev_pm_opp_is_turbo(struct dev_pm_opp *opp); diff --git a/target/linux/ipq806x/patches-4.14/0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch b/target/linux/ipq806x/patches-4.14/0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch new file mode 100644 index 0000000000..711e14c6cd --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch @@ -0,0 +1,38 @@ +From 4533c285c2aedce6d4434d7b877066de3b1ecb33 Mon Sep 17 00:00:00 2001 +From: Georgi Djakov +Date: Thu, 25 Aug 2016 18:43:35 +0300 +Subject: [PATCH 52/69] PM / OPP: Update the voltage tolerance when adjusting + the OPP + +When the voltage is adjusted, the voltage tolerance is not updated. +This can lead to situations where the voltage min value is greater +than the voltage max value. The final result is triggering a BUG() +in the regulator core. +Fix this by updating the voltage tolerance values too. + +Signed-off-by: Georgi Djakov +--- + drivers/base/power/opp/core.c | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/drivers/base/power/opp/core.c ++++ b/drivers/base/power/opp/core.c +@@ -1649,6 +1649,7 @@ int dev_pm_opp_adjust_voltage(struct dev + struct opp_table *opp_table; + struct dev_pm_opp *new_opp, *tmp_opp, *opp = ERR_PTR(-ENODEV); + int r = 0; ++ unsigned long tol; + + /* keep the node allocated */ + new_opp = kmalloc(sizeof(*new_opp), GFP_KERNEL); +@@ -1685,6 +1686,10 @@ int dev_pm_opp_adjust_voltage(struct dev + + /* plug in new node */ + new_opp->supplies[0].u_volt = u_volt; ++ tol = u_volt * opp_table->voltage_tolerance_v1 / 100; ++ new_opp->supplies[0].u_volt = u_volt; ++ new_opp->supplies[0].u_volt_min = u_volt - tol; ++ new_opp->supplies[0].u_volt_max = u_volt + tol; + + list_replace(&opp->node, &new_opp->node); + mutex_unlock(&opp_table_lock); diff --git a/target/linux/ipq806x/patches-4.14/0053-regulator-add-smb208-support.patch b/target/linux/ipq806x/patches-4.14/0053-regulator-add-smb208-support.patch new file mode 100644 index 0000000000..dd4abb15e9 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0053-regulator-add-smb208-support.patch @@ -0,0 +1,55 @@ +From ef10381ca4d01848ebedb4afb2c78feb8052f103 Mon Sep 17 00:00:00 2001 +From: Adrian Panella +Date: Thu, 9 Mar 2017 08:26:54 +0100 +Subject: [PATCH 53/69] regulator: add smb208 support + +Signed-off-by: Adrian Panella +--- + Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 4 ++++ + drivers/regulator/qcom_rpm-regulator.c | 9 +++++++++ + 2 files changed, 13 insertions(+) + +--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt ++++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt +@@ -61,6 +61,7 @@ Regulator nodes are identified by their + "qcom,rpm-pm8901-regulators" + "qcom,rpm-pm8921-regulators" + "qcom,rpm-pm8018-regulators" ++ "qcom,rpm-smb208-regulators" + + - vdd_l0_l1_lvs-supply: + - vdd_l2_l11_l12-supply: +@@ -171,6 +172,9 @@ pm8018: + s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, + l12, l14, lvs1 + ++smb208: ++ s1a, s1b, s2a, s2b ++ + The content of each sub-node is defined by the standard binding for regulators - + see regulator.txt - with additional custom properties described below: + +--- a/drivers/regulator/qcom_rpm-regulator.c ++++ b/drivers/regulator/qcom_rpm-regulator.c +@@ -933,12 +933,21 @@ static const struct rpm_regulator_data r + { } + }; + ++static const struct rpm_regulator_data rpm_smb208_regulators[] = { ++ { "s1a", QCOM_RPM_SMB208_S1a, &smb208_smps, "vin_s1a" }, ++ { "s1b", QCOM_RPM_SMB208_S1b, &smb208_smps, "vin_s1b" }, ++ { "s2a", QCOM_RPM_SMB208_S2a, &smb208_smps, "vin_s2a" }, ++ { "s2b", QCOM_RPM_SMB208_S2b, &smb208_smps, "vin_s2b" }, ++ { } ++}; ++ + static const struct of_device_id rpm_of_match[] = { + { .compatible = "qcom,rpm-pm8018-regulators", + .data = &rpm_pm8018_regulators }, + { .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators }, + { .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators }, + { .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators }, ++ { .compatible = "qcom,rpm-smb208-regulators", .data = &rpm_smb208_regulators }, + { } + }; + MODULE_DEVICE_TABLE(of, rpm_of_match); diff --git a/target/linux/ipq806x/patches-4.14/0054-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch b/target/linux/ipq806x/patches-4.14/0054-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch new file mode 100644 index 0000000000..47c64eca82 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0054-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch @@ -0,0 +1,131 @@ +From 10577f74c35bd395951d1b2382c8d821089b5745 Mon Sep 17 00:00:00 2001 +From: Stephen Boyd +Date: Fri, 18 Sep 2015 17:52:08 -0700 +Subject: [PATCH 54/69] cpufreq-dt: Handle OPP voltage adjust events + +On some SoCs the Adaptive Voltage Scaling (AVS) technique is +employed to optimize the operating voltage of a device. At a +given frequency, the hardware monitors dynamic factors and either +makes a suggestion for how much to adjust a voltage for the +current frequency, or it automatically adjusts the voltage +without software intervention. + +In the former case, an AVS driver will call +dev_pm_opp_modify_voltage() and update the voltage for the +particular OPP the CPUs are using. Add an OPP notifier to +cpufreq-dt so that we can adjust the voltage of the CPU when AVS +updates the OPP. + +Signed-off-by: Stephen Boyd +Acked-by: Viresh Kumar +Signed-off-by: Georgi Djakov +--- + drivers/cpufreq/cpufreq-dt.c | 68 ++++++++++++++++++++++++++++++++++++++++++-- + 1 file changed, 65 insertions(+), 3 deletions(-) + +--- a/drivers/cpufreq/cpufreq-dt.c ++++ b/drivers/cpufreq/cpufreq-dt.c +@@ -32,6 +32,9 @@ struct private_data { + struct device *cpu_dev; + struct thermal_cooling_device *cdev; + const char *reg_name; ++ struct notifier_block opp_nb; ++ struct mutex lock; ++ unsigned long opp_freq; + }; + + static struct freq_attr *cpufreq_dt_attr[] = { +@@ -43,9 +46,16 @@ static struct freq_attr *cpufreq_dt_attr + static int set_target(struct cpufreq_policy *policy, unsigned int index) + { + struct private_data *priv = policy->driver_data; ++ int ret; ++ unsigned long target_freq = policy->freq_table[index].frequency * 1000; ++ ++ mutex_lock(&priv->lock); ++ ret = dev_pm_opp_set_rate(priv->cpu_dev, target_freq); ++ if (!ret) ++ priv->opp_freq = target_freq; ++ mutex_unlock(&priv->lock); + +- return dev_pm_opp_set_rate(priv->cpu_dev, +- policy->freq_table[index].frequency * 1000); ++ return ret; + } + + /* +@@ -86,6 +96,39 @@ node_put: + return name; + } + ++static int opp_notifier(struct notifier_block *nb, unsigned long event, ++ void *data) ++{ ++ struct dev_pm_opp *opp = data; ++ struct private_data *priv = container_of(nb, struct private_data, ++ opp_nb); ++ struct device *cpu_dev = priv->cpu_dev; ++ struct regulator *cpu_reg; ++ unsigned long volt, freq; ++ int ret = 0; ++ ++ if (event == OPP_EVENT_ADJUST_VOLTAGE) { ++ cpu_reg = dev_pm_opp_get_regulator(cpu_dev); ++ if (IS_ERR(cpu_reg)) { ++ ret = PTR_ERR(cpu_reg); ++ goto out; ++ } ++ volt = dev_pm_opp_get_voltage(opp); ++ freq = dev_pm_opp_get_freq(opp); ++ ++ mutex_lock(&priv->lock); ++ if (freq == priv->opp_freq) { ++ ret = regulator_set_voltage_triplet(cpu_reg, volt, volt, volt); ++ } ++ mutex_unlock(&priv->lock); ++ if (ret) ++ dev_err(cpu_dev, "failed to scale voltage: %d\n", ret); ++ } ++ ++out: ++ return notifier_from_errno(ret); ++} ++ + static int resources_available(void) + { + struct device *cpu_dev; +@@ -152,6 +195,7 @@ static int cpufreq_init(struct cpufreq_p + bool fallback = false; + const char *name; + int ret; ++ struct srcu_notifier_head *opp_srcu_head; + + cpu_dev = get_cpu_device(policy->cpu); + if (!cpu_dev) { +@@ -241,13 +285,16 @@ static int cpufreq_init(struct cpufreq_p + goto out_free_opp; + } + ++ mutex_init(&priv->lock); ++ dev_pm_opp_register_notifier(cpu_dev, &priv->opp_nb); ++ + priv->reg_name = name; + priv->opp_table = opp_table; + + ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); + if (ret) { + dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); +- goto out_free_priv; ++ goto out_unregister_nb; + } + + priv->cpu_dev = cpu_dev; +@@ -283,6 +343,8 @@ static int cpufreq_init(struct cpufreq_p + + out_free_cpufreq_table: + dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table); ++out_unregister_nb: ++ dev_pm_opp_unregister_notifier(cpu_dev, &priv->opp_nb); + out_free_priv: + kfree(priv); + out_free_opp: diff --git a/target/linux/ipq806x/patches-4.14/0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch b/target/linux/ipq806x/patches-4.14/0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch new file mode 100644 index 0000000000..166964961b --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch @@ -0,0 +1,90 @@ +From 0759cdff49f1cf361bf503c13f7bcb33da43ab95 Mon Sep 17 00:00:00 2001 +From: Georgi Djakov +Date: Tue, 8 Sep 2015 11:24:41 +0300 +Subject: [PATCH 55/69] cpufreq-dt: Add L2 frequency scaling support + +Signed-off-by: Georgi Djakov +--- + drivers/cpufreq/cpufreq-dt.c | 41 ++++++++++++++++++++++++++++++++++++++++- + include/linux/cpufreq.h | 2 ++ + 2 files changed, 42 insertions(+), 1 deletion(-) + +--- a/drivers/cpufreq/cpufreq-dt.c ++++ b/drivers/cpufreq/cpufreq-dt.c +@@ -48,11 +48,41 @@ static int set_target(struct cpufreq_pol + struct private_data *priv = policy->driver_data; + int ret; + unsigned long target_freq = policy->freq_table[index].frequency * 1000; ++ struct clk *l2_clk = policy->l2_clk; ++ unsigned int l2_freq; ++ unsigned long new_l2_freq = 0; + + mutex_lock(&priv->lock); + ret = dev_pm_opp_set_rate(priv->cpu_dev, target_freq); +- if (!ret) ++ ++ if (!ret) { ++ if (!IS_ERR(l2_clk) && policy->l2_rate[0] && policy->l2_rate[1] && ++ policy->l2_rate[2]) { ++ static unsigned long krait_l2[CONFIG_NR_CPUS] = { }; ++ int cpu, ret = 0; ++ ++ if (target_freq >= policy->l2_rate[2]) ++ new_l2_freq = policy->l2_rate[2]; ++ else if (target_freq >= policy->l2_rate[1]) ++ new_l2_freq = policy->l2_rate[1]; ++ else ++ new_l2_freq = policy->l2_rate[0]; ++ ++ krait_l2[policy->cpu] = new_l2_freq; ++ for_each_present_cpu(cpu) ++ new_l2_freq = max(new_l2_freq, krait_l2[cpu]); ++ ++ l2_freq = clk_get_rate(l2_clk); ++ ++ if (l2_freq != new_l2_freq) { ++ /* scale l2 with the core */ ++ ret = clk_set_rate(l2_clk, new_l2_freq); ++ } ++ } ++ + priv->opp_freq = target_freq; ++ } ++ + mutex_unlock(&priv->lock); + + return ret; +@@ -196,6 +226,8 @@ static int cpufreq_init(struct cpufreq_p + const char *name; + int ret; + struct srcu_notifier_head *opp_srcu_head; ++ struct device_node *l2_np; ++ struct clk *l2_clk = NULL; + + cpu_dev = get_cpu_device(policy->cpu); + if (!cpu_dev) { +@@ -303,6 +335,13 @@ static int cpufreq_init(struct cpufreq_p + + policy->suspend_freq = dev_pm_opp_get_suspend_opp_freq(cpu_dev) / 1000; + ++ l2_clk = clk_get(cpu_dev, "l2"); ++ if (!IS_ERR(l2_clk)) ++ policy->l2_clk = l2_clk; ++ l2_np = of_find_node_by_name(NULL, "qcom,l2"); ++ if (l2_np) ++ of_property_read_u32_array(l2_np, "qcom,l2-rates", policy->l2_rate, 3); ++ + ret = cpufreq_table_validate_and_show(policy, freq_table); + if (ret) { + dev_err(cpu_dev, "%s: invalid frequency table: %d\n", __func__, +--- a/include/linux/cpufreq.h ++++ b/include/linux/cpufreq.h +@@ -73,6 +73,8 @@ struct cpufreq_policy { + unsigned int cpu; /* cpu managing this policy, must be online */ + + struct clk *clk; ++ struct clk *l2_clk; /* L2 clock */ ++ unsigned int l2_rate[3]; /* L2 bus clock rate thresholds */ + struct cpufreq_cpuinfo cpuinfo;/* see above */ + + unsigned int min; /* in kHz */ diff --git a/target/linux/ipq806x/patches-4.14/0056-cpufreq-dt-Add-missing-rcu-locks.patch b/target/linux/ipq806x/patches-4.14/0056-cpufreq-dt-Add-missing-rcu-locks.patch new file mode 100644 index 0000000000..0aae212dfe --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0056-cpufreq-dt-Add-missing-rcu-locks.patch @@ -0,0 +1,23 @@ +From 001a8dcb56ced58c518aaa10a4f0ba5e878705b6 Mon Sep 17 00:00:00 2001 +From: Georgi Djakov +Date: Tue, 17 May 2016 16:15:43 +0300 +Subject: [PATCH 56/69] cpufreq-dt: Add missing rcu locks + +Signed-off-by: Georgi Djakov +--- + drivers/cpufreq/cpufreq-dt.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/cpufreq/cpufreq-dt.c ++++ b/drivers/cpufreq/cpufreq-dt.c +@@ -143,8 +143,10 @@ static int opp_notifier(struct notifier_ + ret = PTR_ERR(cpu_reg); + goto out; + } ++ rcu_read_lock(); + volt = dev_pm_opp_get_voltage(opp); + freq = dev_pm_opp_get_freq(opp); ++ rcu_read_unlock(); + + mutex_lock(&priv->lock); + if (freq == priv->opp_freq) { diff --git a/target/linux/ipq806x/patches-4.14/0059-ARM-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch b/target/linux/ipq806x/patches-4.14/0059-ARM-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch new file mode 100644 index 0000000000..0c8cb8acce --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0059-ARM-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch @@ -0,0 +1,29 @@ +From 04ca10340f1b4d92e849724d322a7ca225d11539 Mon Sep 17 00:00:00 2001 +From: Lina Iyer +Date: Wed, 25 Mar 2015 14:25:29 -0600 +Subject: [PATCH 59/69] ARM: cpuidle: Add cpuidle support for QCOM cpus + +Define ARM_QCOM_CPUIDLE config item to enable cpuidle support. + +Cc: Stephen Boyd +Cc: Arnd Bergmann +Cc: Kevin Hilman +Cc: Daniel Lezcano +Signed-off-by: Lina Iyer +--- + drivers/cpuidle/Kconfig.arm | 7 +++++++ + 1 file changed, 7 insertions(+) + +--- a/drivers/cpuidle/Kconfig.arm ++++ b/drivers/cpuidle/Kconfig.arm +@@ -75,3 +75,10 @@ config ARM_MVEBU_V7_CPUIDLE + depends on ARCH_MVEBU && !ARM64 + help + Select this to enable cpuidle on Armada 370, 38x and XP processors. ++ ++config ARM_QCOM_CPUIDLE ++ bool "CPU Idle Driver for QCOM processors" ++ depends on ARCH_QCOM ++ select ARM_CPUIDLE ++ help ++ Select this to enable cpuidle on QCOM processors. diff --git a/target/linux/ipq806x/patches-4.14/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch b/target/linux/ipq806x/patches-4.14/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch new file mode 100644 index 0000000000..23265e2eca --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch @@ -0,0 +1,62 @@ +From fa71139b55e114aa8c3c4823ff8ee7d49ee810d4 Mon Sep 17 00:00:00 2001 +From: Mathieu Olivari +Date: Wed, 29 Apr 2015 15:21:46 -0700 +Subject: [PATCH 60/69] HACK: arch: arm: force ZRELADDR on arch-qcom + +ARCH_QCOM is using the ARCH_MULTIPLATFORM option, as now recommended +on most ARM architectures. This automatically calculate ZRELADDR by +masking PHYS_OFFSET with 0xf8000000. + +However, on IPQ806x, the first ~20MB of RAM is reserved for the hardware +network accelerators, and the bootloader removes this section from the +layout passed from the ATAGS (when used). + +For newer bootloader, when DT is used, this is not a problem, we just +reserve this memory in the device tree. But if the bootloader doesn't +have DT support, then ATAGS have to be used. In this case, the ARM +decompressor will position the kernel in this low mem, which will not be +in the RAM section mapped by the bootloader, which means the kernel will +freeze in the middle of the boot process trying to map the memory. + +As a work around, this patch allows disabling AUTO_ZRELADDR when +ARCH_QCOM is selected. It makes the zImage usage possible on bootloaders +which don't support device-tree, which is the case on certain early +IPQ806x based designs. + +Signed-off-by: Mathieu Olivari +--- + arch/arm/Kconfig | 2 +- + arch/arm/Makefile | 2 ++ + arch/arm/mach-qcom/Makefile.boot | 1 + + 3 files changed, 4 insertions(+), 1 deletion(-) + create mode 100644 arch/arm/mach-qcom/Makefile.boot + +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -341,7 +341,7 @@ + depends on MMU + select ARM_HAS_SG_CHAIN + select ARM_PATCH_PHYS_VIRT +- select AUTO_ZRELADDR ++ select AUTO_ZRELADDR if !ARCH_QCOM + select TIMER_OF + select COMMON_CLK + select GENERIC_CLOCKEVENTS +--- a/arch/arm/Makefile ++++ b/arch/arm/Makefile +@@ -255,9 +255,11 @@ MACHINE := arch/arm/mach-$(word 1,$(mac + else + MACHINE := + endif ++ifeq ($(CONFIG_ARCH_QCOM),) + ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y) + MACHINE := + endif ++endif + + machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y)) + platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y))) +--- /dev/null ++++ b/arch/arm/mach-qcom/Makefile.boot +@@ -0,0 +1 @@ ++zreladdr-y+= 0x42208000 diff --git a/target/linux/ipq806x/patches-4.14/0061-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch b/target/linux/ipq806x/patches-4.14/0061-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch new file mode 100644 index 0000000000..ce18093406 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0061-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch @@ -0,0 +1,23 @@ +From 5001f2e1a325b68dbf225bd17f69a4d3d975cca5 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 9 Mar 2017 09:31:44 +0100 +Subject: [PATCH 61/69] mtd: "rootfs" conflicts with OpenWrt auto mounting + +Signed-off-by: John Crispin +--- + drivers/mtd/qcom_smem_part.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/mtd/qcom_smem_part.c ++++ b/drivers/mtd/qcom_smem_part.c +@@ -189,6 +189,10 @@ static int parse_qcom_smem_partitions(st + m_part->size = le32_to_cpu(s_part->size) * (*smem_blksz); + m_part->offset = le32_to_cpu(s_part->start) * (*smem_blksz); + ++ /* "rootfs" conflicts with OpenWrt auto mounting */ ++ if (mtd_type_is_nand(master) && !strcmp(m_part->name, "rootfs")) ++ m_part->name = "ubi"; ++ + /* + * The last SMEM partition may have its size marked as + * something like 0xffffffff, which means "until the end of the diff --git a/target/linux/ipq806x/patches-4.14/0062-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch b/target/linux/ipq806x/patches-4.14/0062-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch new file mode 100644 index 0000000000..004018cac2 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0062-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch @@ -0,0 +1,25 @@ +From a16fcf911a020e46439a3bb3e702463fc3159831 Mon Sep 17 00:00:00 2001 +From: Abhishek Sahu +Date: Wed, 18 Nov 2015 12:38:56 +0530 +Subject: [PATCH 62/69] ipq806x: gcc: Added the enable regs and mask for PRNG + +kernel got hanged while reading from /dev/hwrng at the +time of PRNG clock enable + +Change-Id: I89856c7e19e6639508e6a2774304583a3ec91172 +Signed-off-by: Abhishek Sahu +--- + drivers/clk/qcom/gcc-ipq806x.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/clk/qcom/gcc-ipq806x.c ++++ b/drivers/clk/qcom/gcc-ipq806x.c +@@ -1233,6 +1233,8 @@ static struct clk_rcg prng_src = { + .parent_map = gcc_pxo_pll8_map, + }, + .clkr = { ++ .enable_reg = 0x2e80, ++ .enable_mask = BIT(11), + .hw.init = &(struct clk_init_data){ + .name = "prng_src", + .parent_names = gcc_pxo_pll8, diff --git a/target/linux/ipq806x/patches-4.14/0063-1-ipq806x-tsens-driver.patch b/target/linux/ipq806x/patches-4.14/0063-1-ipq806x-tsens-driver.patch new file mode 100644 index 0000000000..b427550cd8 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0063-1-ipq806x-tsens-driver.patch @@ -0,0 +1,627 @@ +From 3302e1e1a3cfa4e67fda2a61d6f0c42205d40932 Mon Sep 17 00:00:00 2001 +From: Rajith Cherian +Date: Tue, 14 Feb 2017 18:30:43 +0530 +Subject: [PATCH] ipq8064: tsens: Base tsens driver for IPQ8064 + +Add TSENS driver template to support IPQ8064. +This is a base file copied from tsens-8960.c + +Change-Id: I47c573fdfa2d898243c6a6ba952d1632f91391f7 +Signed-off-by: Rajith Cherian + +ipq8064: tsens: TSENS driver support for IPQ8064 + +Support for IPQ8064 tsens driver. The driver works +with the thermal framework. The driver overrides the +following fucntionalities: + +1. Get current temperature. +2. Get/Set trip temperatures. +3. Enabled/Disable trip points. +4. ISR for threshold generated interrupt. +5. Notify userspace when trip points are hit. + +Change-Id: I8bc7204fd627d10875ab13fc1de8cb6c2ed7a918 +Signed-off-by: Rajith Cherian +--- + .../devicetree/bindings/thermal/qcom-tsens.txt | 1 + + drivers/thermal/qcom/Makefile | 3 +- + drivers/thermal/qcom/tsens-ipq8064.c | 551 +++++++++++++++++++++ + drivers/thermal/qcom/tsens.c | 3 + + drivers/thermal/qcom/tsens.h | 2 +- + 5 files changed, 558 insertions(+), 2 deletions(-) + create mode 100644 drivers/thermal/qcom/tsens-ipq8064.c + +--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt ++++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt +@@ -5,6 +5,7 @@ Required properties: + - "qcom,msm8916-tsens" : For 8916 Family of SoCs + - "qcom,msm8974-tsens" : For 8974 Family of SoCs + - "qcom,msm8996-tsens" : For 8996 Family of SoCs ++ - "qcom,ipq8064-tsens" : For IPQ8064 + + - reg: Address range of the thermal registers + - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description. +--- a/drivers/thermal/qcom/Makefile ++++ b/drivers/thermal/qcom/Makefile +@@ -1,2 +1,3 @@ + obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o +-qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o ++qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o \ ++ tsens-ipq8064.o +--- /dev/null ++++ b/drivers/thermal/qcom/tsens-ipq8064.c +@@ -0,0 +1,551 @@ ++/* ++ * Copyright (c) 2015, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include "tsens.h" ++ ++#define CAL_MDEGC 30000 ++ ++#define CONFIG_ADDR 0x3640 ++/* CONFIG_ADDR bitmasks */ ++#define CONFIG 0x9b ++#define CONFIG_MASK 0xf ++#define CONFIG_SHIFT 0 ++ ++#define STATUS_CNTL_8064 0x3660 ++#define CNTL_ADDR 0x3620 ++/* CNTL_ADDR bitmasks */ ++#define EN BIT(0) ++#define SW_RST BIT(1) ++#define SENSOR0_EN BIT(3) ++#define SLP_CLK_ENA BIT(26) ++#define MEASURE_PERIOD 1 ++#define SENSOR0_SHIFT 3 ++ ++/* INT_STATUS_ADDR bitmasks */ ++#define MIN_STATUS_MASK BIT(0) ++#define LOWER_STATUS_CLR BIT(1) ++#define UPPER_STATUS_CLR BIT(2) ++#define MAX_STATUS_MASK BIT(3) ++ ++#define THRESHOLD_ADDR 0x3624 ++/* THRESHOLD_ADDR bitmasks */ ++#define THRESHOLD_MAX_CODE 0x20000 ++#define THRESHOLD_MIN_CODE 0 ++#define THRESHOLD_MAX_LIMIT_SHIFT 24 ++#define THRESHOLD_MIN_LIMIT_SHIFT 16 ++#define THRESHOLD_UPPER_LIMIT_SHIFT 8 ++#define THRESHOLD_LOWER_LIMIT_SHIFT 0 ++#define THRESHOLD_MAX_LIMIT_MASK (THRESHOLD_MAX_CODE << \ ++ THRESHOLD_MAX_LIMIT_SHIFT) ++#define THRESHOLD_MIN_LIMIT_MASK (THRESHOLD_MAX_CODE << \ ++ THRESHOLD_MIN_LIMIT_SHIFT) ++#define THRESHOLD_UPPER_LIMIT_MASK (THRESHOLD_MAX_CODE << \ ++ THRESHOLD_UPPER_LIMIT_SHIFT) ++#define THRESHOLD_LOWER_LIMIT_MASK (THRESHOLD_MAX_CODE << \ ++ THRESHOLD_LOWER_LIMIT_SHIFT) ++ ++/* Initial temperature threshold values */ ++#define LOWER_LIMIT_TH 0x9d /* 95C */ ++#define UPPER_LIMIT_TH 0xa6 /* 105C */ ++#define MIN_LIMIT_TH 0x0 ++#define MAX_LIMIT_TH 0xff ++ ++#define S0_STATUS_ADDR 0x3628 ++#define STATUS_ADDR_OFFSET 2 ++#define SENSOR_STATUS_SIZE 4 ++#define INT_STATUS_ADDR 0x363c ++#define TRDY_MASK BIT(7) ++#define TIMEOUT_US 100 ++ ++#define TSENS_EN BIT(0) ++#define TSENS_SW_RST BIT(1) ++#define TSENS_ADC_CLK_SEL BIT(2) ++#define SENSOR0_EN BIT(3) ++#define SENSOR1_EN BIT(4) ++#define SENSOR2_EN BIT(5) ++#define SENSOR3_EN BIT(6) ++#define SENSOR4_EN BIT(7) ++#define SENSORS_EN (SENSOR0_EN | SENSOR1_EN | \ ++ SENSOR2_EN | SENSOR3_EN | SENSOR4_EN) ++#define TSENS_8064_SENSOR5_EN BIT(8) ++#define TSENS_8064_SENSOR6_EN BIT(9) ++#define TSENS_8064_SENSOR7_EN BIT(10) ++#define TSENS_8064_SENSOR8_EN BIT(11) ++#define TSENS_8064_SENSOR9_EN BIT(12) ++#define TSENS_8064_SENSOR10_EN BIT(13) ++#define TSENS_8064_SENSORS_EN (SENSORS_EN | \ ++ TSENS_8064_SENSOR5_EN | \ ++ TSENS_8064_SENSOR6_EN | \ ++ TSENS_8064_SENSOR7_EN | \ ++ TSENS_8064_SENSOR8_EN | \ ++ TSENS_8064_SENSOR9_EN | \ ++ TSENS_8064_SENSOR10_EN) ++ ++#define TSENS_8064_SEQ_SENSORS 5 ++#define TSENS_8064_S4_S5_OFFSET 40 ++#define TSENS_FACTOR 1 ++ ++/* Trips: from very hot to very cold */ ++enum tsens_trip_type { ++ TSENS_TRIP_STAGE3 = 0, ++ TSENS_TRIP_STAGE2, ++ TSENS_TRIP_STAGE1, ++ TSENS_TRIP_STAGE0, ++ TSENS_TRIP_NUM, ++}; ++ ++u32 tsens_8064_slope[] = { ++ 1176, 1176, 1154, 1176, ++ 1111, 1132, 1132, 1199, ++ 1132, 1199, 1132 ++ }; ++ ++/* Temperature on y axis and ADC-code on x-axis */ ++static inline int code_to_degC(u32 adc_code, const struct tsens_sensor *s) ++{ ++ int degcbeforefactor, degc; ++ ++ degcbeforefactor = (adc_code * s->slope) + s->offset; ++ ++ if (degcbeforefactor == 0) ++ degc = degcbeforefactor; ++ else if (degcbeforefactor > 0) ++ degc = (degcbeforefactor + TSENS_FACTOR/2) ++ / TSENS_FACTOR; ++ else ++ degc = (degcbeforefactor - TSENS_FACTOR/2) ++ / TSENS_FACTOR; ++ ++ return degc; ++} ++ ++static int degC_to_code(int degC, const struct tsens_sensor *s) ++{ ++ int code = ((degC * TSENS_FACTOR - s->offset) + (s->slope/2)) ++ / s->slope; ++ ++ if (code > THRESHOLD_MAX_CODE) ++ code = THRESHOLD_MAX_CODE; ++ else if (code < THRESHOLD_MIN_CODE) ++ code = THRESHOLD_MIN_CODE; ++ return code; ++} ++ ++static int suspend_ipq8064(struct tsens_device *tmdev) ++{ ++ int ret; ++ unsigned int mask; ++ struct regmap *map = tmdev->map; ++ ++ ret = regmap_read(map, THRESHOLD_ADDR, &tmdev->ctx.threshold); ++ if (ret) ++ return ret; ++ ++ ret = regmap_read(map, CNTL_ADDR, &tmdev->ctx.control); ++ if (ret) ++ return ret; ++ ++ mask = SLP_CLK_ENA | EN; ++ ++ ret = regmap_update_bits(map, CNTL_ADDR, mask, 0); ++ if (ret) ++ return ret; ++ ++ return 0; ++} ++ ++static int resume_ipq8064(struct tsens_device *tmdev) ++{ ++ int ret; ++ struct regmap *map = tmdev->map; ++ ++ ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST); ++ if (ret) ++ return ret; ++ ++ ret = regmap_update_bits(map, CONFIG_ADDR, CONFIG_MASK, CONFIG); ++ if (ret) ++ return ret; ++ ++ ret = regmap_write(map, THRESHOLD_ADDR, tmdev->ctx.threshold); ++ if (ret) ++ return ret; ++ ++ ret = regmap_write(map, CNTL_ADDR, tmdev->ctx.control); ++ if (ret) ++ return ret; ++ ++ return 0; ++} ++ ++static void notify_uspace_tsens_fn(struct work_struct *work) ++{ ++ struct tsens_sensor *s = container_of(work, struct tsens_sensor, ++ notify_work); ++ ++ sysfs_notify(&s->tzd->device.kobj, NULL, "type"); ++} ++ ++static void tsens_scheduler_fn(struct work_struct *work) ++{ ++ struct tsens_device *tmdev = container_of(work, struct tsens_device, ++ tsens_work); ++ unsigned int threshold, threshold_low, code, reg, sensor, mask; ++ unsigned int sensor_addr; ++ bool upper_th_x, lower_th_x; ++ int adc_code, ret; ++ ++ ret = regmap_read(tmdev->map, STATUS_CNTL_8064, ®); ++ if (ret) ++ return; ++ reg = reg | LOWER_STATUS_CLR | UPPER_STATUS_CLR; ++ ret = regmap_write(tmdev->map, STATUS_CNTL_8064, reg); ++ if (ret) ++ return; ++ ++ mask = ~(LOWER_STATUS_CLR | UPPER_STATUS_CLR); ++ ret = regmap_read(tmdev->map, THRESHOLD_ADDR, &threshold); ++ if (ret) ++ return; ++ threshold_low = (threshold & THRESHOLD_LOWER_LIMIT_MASK) ++ >> THRESHOLD_LOWER_LIMIT_SHIFT; ++ threshold = (threshold & THRESHOLD_UPPER_LIMIT_MASK) ++ >> THRESHOLD_UPPER_LIMIT_SHIFT; ++ ++ ret = regmap_read(tmdev->map, STATUS_CNTL_8064, ®); ++ if (ret) ++ return; ++ ++ ret = regmap_read(tmdev->map, CNTL_ADDR, &sensor); ++ if (ret) ++ return; ++ sensor &= (uint32_t) TSENS_8064_SENSORS_EN; ++ sensor >>= SENSOR0_SHIFT; ++ ++ /* Constraint: There is only 1 interrupt control register for all ++ * 11 temperature sensor. So monitoring more than 1 sensor based ++ * on interrupts will yield inconsistent result. To overcome this ++ * issue we will monitor only sensor 0 which is the master sensor. ++ */ ++ ++ /* Skip if the sensor is disabled */ ++ if (sensor & 1) { ++ ret = regmap_read(tmdev->map, tmdev->sensor[0].status, &code); ++ if (ret) ++ return; ++ upper_th_x = code >= threshold; ++ lower_th_x = code <= threshold_low; ++ if (upper_th_x) ++ mask |= UPPER_STATUS_CLR; ++ if (lower_th_x) ++ mask |= LOWER_STATUS_CLR; ++ if (upper_th_x || lower_th_x) { ++ /* Notify user space */ ++ schedule_work(&tmdev->sensor[0].notify_work); ++ regmap_read(tmdev->map, sensor_addr, &adc_code); ++ pr_debug("Trigger (%d degrees) for sensor %d\n", ++ code_to_degC(adc_code, &tmdev->sensor[0]), 0); ++ } ++ } ++ regmap_write(tmdev->map, STATUS_CNTL_8064, reg & mask); ++ ++ /* force memory to sync */ ++ mb(); ++} ++ ++static irqreturn_t tsens_isr(int irq, void *data) ++{ ++ struct tsens_device *tmdev = data; ++ ++ schedule_work(&tmdev->tsens_work); ++ return IRQ_HANDLED; ++} ++ ++static void hw_init(struct tsens_device *tmdev) ++{ ++ int ret; ++ unsigned int reg_cntl = 0, reg_cfg = 0, reg_thr = 0; ++ unsigned int reg_status_cntl = 0; ++ ++ regmap_read(tmdev->map, CNTL_ADDR, ®_cntl); ++ regmap_write(tmdev->map, CNTL_ADDR, reg_cntl | TSENS_SW_RST); ++ ++ reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18) ++ | (((1 << tmdev->num_sensors) - 1) << SENSOR0_SHIFT); ++ regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); ++ regmap_read(tmdev->map, STATUS_CNTL_8064, ®_status_cntl); ++ reg_status_cntl |= LOWER_STATUS_CLR | UPPER_STATUS_CLR ++ | MIN_STATUS_MASK | MAX_STATUS_MASK; ++ regmap_write(tmdev->map, STATUS_CNTL_8064, reg_status_cntl); ++ reg_cntl |= TSENS_EN; ++ regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); ++ ++ regmap_read(tmdev->map, CONFIG_ADDR, ®_cfg); ++ reg_cfg = (reg_cfg & ~CONFIG_MASK) | (CONFIG << CONFIG_SHIFT); ++ regmap_write(tmdev->map, CONFIG_ADDR, reg_cfg); ++ ++ reg_thr |= (LOWER_LIMIT_TH << THRESHOLD_LOWER_LIMIT_SHIFT) ++ | (UPPER_LIMIT_TH << THRESHOLD_UPPER_LIMIT_SHIFT) ++ | (MIN_LIMIT_TH << THRESHOLD_MIN_LIMIT_SHIFT) ++ | (MAX_LIMIT_TH << THRESHOLD_MAX_LIMIT_SHIFT); ++ ++ regmap_write(tmdev->map, THRESHOLD_ADDR, reg_thr); ++ ++ ret = devm_request_irq(tmdev->dev, tmdev->tsens_irq, tsens_isr, ++ IRQF_TRIGGER_RISING, "tsens_interrupt", tmdev); ++ if (ret < 0) { ++ pr_err("%s: request_irq FAIL: %d\n", __func__, ret); ++ return; ++ } ++ ++ INIT_WORK(&tmdev->tsens_work, tsens_scheduler_fn); ++} ++ ++static int init_ipq8064(struct tsens_device *tmdev) ++{ ++ int ret, i; ++ u32 reg_cntl, offset = 0; ++ ++ init_common(tmdev); ++ if (!tmdev->map) ++ return -ENODEV; ++ ++ /* ++ * The status registers for each sensor are discontiguous ++ * because some SoCs have 5 sensors while others have more ++ * but the control registers stay in the same place, i.e ++ * directly after the first 5 status registers. ++ */ ++ for (i = 0; i < tmdev->num_sensors; i++) { ++ if (i >= TSENS_8064_SEQ_SENSORS) ++ offset = TSENS_8064_S4_S5_OFFSET; ++ ++ tmdev->sensor[i].status = S0_STATUS_ADDR + offset ++ + (i << STATUS_ADDR_OFFSET); ++ tmdev->sensor[i].slope = tsens_8064_slope[i]; ++ INIT_WORK(&tmdev->sensor[i].notify_work, ++ notify_uspace_tsens_fn); ++ } ++ ++ reg_cntl = SW_RST; ++ ret = regmap_update_bits(tmdev->map, CNTL_ADDR, SW_RST, reg_cntl); ++ if (ret) ++ return ret; ++ ++ reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18); ++ reg_cntl &= ~SW_RST; ++ ret = regmap_update_bits(tmdev->map, CONFIG_ADDR, ++ CONFIG_MASK, CONFIG); ++ ++ reg_cntl |= GENMASK(tmdev->num_sensors - 1, 0) << SENSOR0_SHIFT; ++ ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); ++ if (ret) ++ return ret; ++ ++ reg_cntl |= EN; ++ ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl); ++ if (ret) ++ return ret; ++ ++ return 0; ++} ++ ++static int calibrate_ipq8064(struct tsens_device *tmdev) ++{ ++ int i; ++ char *data, *data_backup; ++ ++ ssize_t num_read = tmdev->num_sensors; ++ struct tsens_sensor *s = tmdev->sensor; ++ ++ data = qfprom_read(tmdev->dev, "calib"); ++ if (IS_ERR(data)) { ++ pr_err("Calibration not found.\n"); ++ return PTR_ERR(data); ++ } ++ ++ data_backup = qfprom_read(tmdev->dev, "calib_backup"); ++ if (IS_ERR(data_backup)) { ++ pr_err("Backup calibration not found.\n"); ++ return PTR_ERR(data_backup); ++ } ++ ++ for (i = 0; i < num_read; i++) { ++ s[i].calib_data = readb_relaxed(data + i); ++ s[i].calib_data_backup = readb_relaxed(data_backup + i); ++ ++ if (s[i].calib_data_backup) ++ s[i].calib_data = s[i].calib_data_backup; ++ if (!s[i].calib_data) { ++ pr_err("QFPROM TSENS calibration data not present\n"); ++ return -ENODEV; ++ } ++ s[i].slope = tsens_8064_slope[i]; ++ s[i].offset = CAL_MDEGC - (s[i].calib_data * s[i].slope); ++ } ++ ++ hw_init(tmdev); ++ ++ return 0; ++} ++ ++static int get_temp_ipq8064(struct tsens_device *tmdev, int id, int *temp) ++{ ++ int ret; ++ u32 code, trdy; ++ const struct tsens_sensor *s = &tmdev->sensor[id]; ++ unsigned long timeout; ++ ++ timeout = jiffies + usecs_to_jiffies(TIMEOUT_US); ++ do { ++ ret = regmap_read(tmdev->map, INT_STATUS_ADDR, &trdy); ++ if (ret) ++ return ret; ++ if (!(trdy & TRDY_MASK)) ++ continue; ++ ret = regmap_read(tmdev->map, s->status, &code); ++ if (ret) ++ return ret; ++ *temp = code_to_degC(code, s); ++ return 0; ++ } while (time_before(jiffies, timeout)); ++ ++ return -ETIMEDOUT; ++} ++ ++static int set_trip_temp_ipq8064(void *data, int trip, int temp) ++{ ++ unsigned int reg_th, reg_cntl; ++ int ret, code, code_chk, hi_code, lo_code; ++ const struct tsens_sensor *s = data; ++ struct tsens_device *tmdev = s->tmdev; ++ ++ code_chk = code = degC_to_code(temp, s); ++ ++ if (code < THRESHOLD_MIN_CODE || code > THRESHOLD_MAX_CODE) ++ return -EINVAL; ++ ++ ret = regmap_read(tmdev->map, STATUS_CNTL_8064, ®_cntl); ++ if (ret) ++ return ret; ++ ++ ret = regmap_read(tmdev->map, THRESHOLD_ADDR, ®_th); ++ if (ret) ++ return ret; ++ ++ hi_code = (reg_th & THRESHOLD_UPPER_LIMIT_MASK) ++ >> THRESHOLD_UPPER_LIMIT_SHIFT; ++ lo_code = (reg_th & THRESHOLD_LOWER_LIMIT_MASK) ++ >> THRESHOLD_LOWER_LIMIT_SHIFT; ++ ++ switch (trip) { ++ case TSENS_TRIP_STAGE3: ++ code <<= THRESHOLD_MAX_LIMIT_SHIFT; ++ reg_th &= ~THRESHOLD_MAX_LIMIT_MASK; ++ break; ++ case TSENS_TRIP_STAGE2: ++ if (code_chk <= lo_code) ++ return -EINVAL; ++ code <<= THRESHOLD_UPPER_LIMIT_SHIFT; ++ reg_th &= ~THRESHOLD_UPPER_LIMIT_MASK; ++ break; ++ case TSENS_TRIP_STAGE1: ++ if (code_chk >= hi_code) ++ return -EINVAL; ++ code <<= THRESHOLD_LOWER_LIMIT_SHIFT; ++ reg_th &= ~THRESHOLD_LOWER_LIMIT_MASK; ++ break; ++ case TSENS_TRIP_STAGE0: ++ code <<= THRESHOLD_MIN_LIMIT_SHIFT; ++ reg_th &= ~THRESHOLD_MIN_LIMIT_MASK; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ ret = regmap_write(tmdev->map, THRESHOLD_ADDR, reg_th | code); ++ if (ret) ++ return ret; ++ ++ return 0; ++} ++ ++static int set_trip_activate_ipq8064(void *data, int trip, ++ enum thermal_trip_activation_mode mode) ++{ ++ unsigned int reg_cntl, mask, val; ++ const struct tsens_sensor *s = data; ++ struct tsens_device *tmdev = s->tmdev; ++ int ret; ++ ++ if (!tmdev || trip < 0) ++ return -EINVAL; ++ ++ ret = regmap_read(tmdev->map, STATUS_CNTL_8064, ®_cntl); ++ if (ret) ++ return ret; ++ ++ switch (trip) { ++ case TSENS_TRIP_STAGE3: ++ mask = MAX_STATUS_MASK; ++ break; ++ case TSENS_TRIP_STAGE2: ++ mask = UPPER_STATUS_CLR; ++ break; ++ case TSENS_TRIP_STAGE1: ++ mask = LOWER_STATUS_CLR; ++ break; ++ case TSENS_TRIP_STAGE0: ++ mask = MIN_STATUS_MASK; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ if (mode == THERMAL_TRIP_ACTIVATION_DISABLED) ++ val = reg_cntl | mask; ++ else ++ val = reg_cntl & ~mask; ++ ++ ret = regmap_write(tmdev->map, STATUS_CNTL_8064, val); ++ if (ret) ++ return ret; ++ ++ /* force memory to sync */ ++ mb(); ++ return 0; ++} ++ ++const struct tsens_ops ops_ipq8064 = { ++ .init = init_ipq8064, ++ .calibrate = calibrate_ipq8064, ++ .get_temp = get_temp_ipq8064, ++ .suspend = suspend_ipq8064, ++ .resume = resume_ipq8064, ++ .set_trip_temp = set_trip_temp_ipq8064, ++ .set_trip_activate = set_trip_activate_ipq8064, ++}; ++ ++const struct tsens_data data_ipq8064 = { ++ .num_sensors = 11, ++ .ops = &ops_ipq8064, ++}; +--- a/drivers/thermal/qcom/tsens.c ++++ b/drivers/thermal/qcom/tsens.c +@@ -72,6 +72,9 @@ static const struct of_device_id tsens_t + }, { + .compatible = "qcom,msm8996-tsens", + .data = &data_8996, ++ }, { ++ .compatible = "qcom,ipq8064-tsens", ++ .data = &data_ipq8064, + }, + {} + }; +--- a/drivers/thermal/qcom/tsens.h ++++ b/drivers/thermal/qcom/tsens.h +@@ -89,6 +89,6 @@ void compute_intercept_slope(struct tsen + int init_common(struct tsens_device *); + int get_temp_common(struct tsens_device *, int, int *); + +-extern const struct tsens_data data_8916, data_8974, data_8960, data_8996; ++extern const struct tsens_data data_8916, data_8974, data_8960, data_8996, data_ipq8064; + + #endif /* __QCOM_TSENS_H__ */ diff --git a/target/linux/ipq806x/patches-4.14/0063-2-tsens-support-configurable-interrupts.patch b/target/linux/ipq806x/patches-4.14/0063-2-tsens-support-configurable-interrupts.patch new file mode 100644 index 0000000000..ef270dd3b4 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0063-2-tsens-support-configurable-interrupts.patch @@ -0,0 +1,453 @@ +From 4e87400732c77765afae2ea89ed43837457aa604 Mon Sep 17 00:00:00 2001 +From: Rajith Cherian +Date: Wed, 1 Feb 2017 19:00:26 +0530 +Subject: [PATCH] ipq8064: tsens: Support for configurable interrupts + +Provide support for adding configurable high and +configurable low trip temperatures. An interrupts is +also triggerred when these trip points are hit. The +interrupts can be activated or deactivated from sysfs. +This functionality is made available only if +CONFIG_THERMAL_WRITABLE_TRIPS is defined. + +Change-Id: Ib73f3f9459de4fffce7bb985a0312a88291f4934 +Signed-off-by: Rajith Cherian +--- + .../devicetree/bindings/thermal/qcom-tsens.txt | 4 ++ + drivers/thermal/of-thermal.c | 63 ++++++++++++++++++---- + drivers/thermal/qcom/tsens.c | 43 ++++++++++++--- + drivers/thermal/qcom/tsens.h | 11 ++++ + drivers/thermal/thermal_core.c | 44 ++++++++++++++- + include/linux/thermal.h | 14 +++++ + 6 files changed, 162 insertions(+), 17 deletions(-) + +--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt ++++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt +@@ -12,11 +12,15 @@ Required properties: + - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify + nvmem cells + ++Optional properties: ++- interrupts: Interrupt which gets triggered when threshold is hit ++ + Example: + tsens: thermal-sensor@900000 { + compatible = "qcom,msm8916-tsens"; + reg = <0x4a8000 0x2000>; + nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; + nvmem-cell-names = "caldata", "calsel"; ++ interrupts = <0 178 0>; + #thermal-sensor-cells = <1>; + }; +--- a/drivers/thermal/of-thermal.c ++++ b/drivers/thermal/of-thermal.c +@@ -95,7 +95,7 @@ static int of_thermal_get_temp(struct th + { + struct __thermal_zone *data = tz->devdata; + +- if (!data->ops->get_temp) ++ if (!data->ops->get_temp || (data->mode == THERMAL_DEVICE_DISABLED)) + return -EINVAL; + + return data->ops->get_temp(data->sensor_data, temp); +@@ -106,7 +106,8 @@ static int of_thermal_set_trips(struct t + { + struct __thermal_zone *data = tz->devdata; + +- if (!data->ops || !data->ops->set_trips) ++ if (!data->ops || !data->ops->set_trips ++ || (data->mode == THERMAL_DEVICE_DISABLED)) + return -EINVAL; + + return data->ops->set_trips(data->sensor_data, low, high); +@@ -192,6 +193,9 @@ static int of_thermal_set_emul_temp(stru + { + struct __thermal_zone *data = tz->devdata; + ++ if (data->mode == THERMAL_DEVICE_DISABLED) ++ return -EINVAL; ++ + return data->ops->set_emul_temp(data->sensor_data, temp); + } + +@@ -200,7 +204,7 @@ static int of_thermal_get_trend(struct t + { + struct __thermal_zone *data = tz->devdata; + +- if (!data->ops->get_trend) ++ if (!data->ops->get_trend || (data->mode == THERMAL_DEVICE_DISABLED)) + return -EINVAL; + + return data->ops->get_trend(data->sensor_data, trip, trend); +@@ -286,7 +290,9 @@ static int of_thermal_set_mode(struct th + mutex_unlock(&tz->lock); + + data->mode = mode; +- thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); ++ ++ if (mode == THERMAL_DEVICE_ENABLED) ++ thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED); + + return 0; + } +@@ -296,7 +302,8 @@ static int of_thermal_get_trip_type(stru + { + struct __thermal_zone *data = tz->devdata; + +- if (trip >= data->ntrips || trip < 0) ++ if (trip >= data->ntrips || trip < 0 ++ || (data->mode == THERMAL_DEVICE_DISABLED)) + return -EDOM; + + *type = data->trips[trip].type; +@@ -304,12 +311,39 @@ static int of_thermal_get_trip_type(stru + return 0; + } + ++static int of_thermal_activate_trip_type(struct thermal_zone_device *tz, ++ int trip, enum thermal_trip_activation_mode mode) ++{ ++ struct __thermal_zone *data = tz->devdata; ++ ++ if (trip >= data->ntrips || trip < 0 ++ || (data->mode == THERMAL_DEVICE_DISABLED)) ++ return -EDOM; ++ ++ /* ++ * The configurable_hi and configurable_lo trip points can be ++ * activated and deactivated. ++ */ ++ ++ if (data->ops->set_trip_activate) { ++ int ret; ++ ++ ret = data->ops->set_trip_activate(data->sensor_data, ++ trip, mode); ++ if (ret) ++ return ret; ++ } ++ ++ return 0; ++} ++ + static int of_thermal_get_trip_temp(struct thermal_zone_device *tz, int trip, + int *temp) + { + struct __thermal_zone *data = tz->devdata; + +- if (trip >= data->ntrips || trip < 0) ++ if (trip >= data->ntrips || trip < 0 ++ || (data->mode == THERMAL_DEVICE_DISABLED)) + return -EDOM; + + *temp = data->trips[trip].temperature; +@@ -322,7 +356,8 @@ static int of_thermal_set_trip_temp(stru + { + struct __thermal_zone *data = tz->devdata; + +- if (trip >= data->ntrips || trip < 0) ++ if (trip >= data->ntrips || trip < 0 ++ || (data->mode == THERMAL_DEVICE_DISABLED)) + return -EDOM; + + if (data->ops->set_trip_temp) { +@@ -344,7 +379,8 @@ static int of_thermal_get_trip_hyst(stru + { + struct __thermal_zone *data = tz->devdata; + +- if (trip >= data->ntrips || trip < 0) ++ if (trip >= data->ntrips || trip < 0 ++ || (data->mode == THERMAL_DEVICE_DISABLED)) + return -EDOM; + + *hyst = data->trips[trip].hysteresis; +@@ -357,7 +393,8 @@ static int of_thermal_set_trip_hyst(stru + { + struct __thermal_zone *data = tz->devdata; + +- if (trip >= data->ntrips || trip < 0) ++ if (trip >= data->ntrips || trip < 0 ++ || (data->mode == THERMAL_DEVICE_DISABLED)) + return -EDOM; + + /* thermal framework should take care of data->mask & (1 << trip) */ +@@ -432,6 +469,9 @@ thermal_zone_of_add_sensor(struct device + if (ops->set_emul_temp) + tzd->ops->set_emul_temp = of_thermal_set_emul_temp; + ++ if (ops->set_trip_activate) ++ tzd->ops->set_trip_activate = of_thermal_activate_trip_type; ++ + mutex_unlock(&tzd->lock); + + return tzd; +@@ -726,7 +766,10 @@ static const char * const trip_types[] = + [THERMAL_TRIP_ACTIVE] = "active", + [THERMAL_TRIP_PASSIVE] = "passive", + [THERMAL_TRIP_HOT] = "hot", +- [THERMAL_TRIP_CRITICAL] = "critical", ++ [THERMAL_TRIP_CRITICAL] = "critical_high", ++ [THERMAL_TRIP_CONFIGURABLE_HI] = "configurable_hi", ++ [THERMAL_TRIP_CONFIGURABLE_LOW] = "configurable_lo", ++ [THERMAL_TRIP_CRITICAL_LOW] = "critical_low", + }; + + /** +--- a/drivers/thermal/qcom/tsens.c ++++ b/drivers/thermal/qcom/tsens.c +@@ -31,7 +31,7 @@ static int tsens_get_temp(void *data, in + + static int tsens_get_trend(void *p, int trip, enum thermal_trend *trend) + { +- const struct tsens_sensor *s = p; ++ struct tsens_sensor *s = p; + struct tsens_device *tmdev = s->tmdev; + + if (tmdev->ops->get_trend) +@@ -40,9 +40,10 @@ static int tsens_get_trend(void *p, int + return -ENOTSUPP; + } + +-static int __maybe_unused tsens_suspend(struct device *dev) ++static int __maybe_unused tsens_suspend(void *data) + { +- struct tsens_device *tmdev = dev_get_drvdata(dev); ++ struct tsens_sensor *s = data; ++ struct tsens_device *tmdev = s->tmdev; + + if (tmdev->ops && tmdev->ops->suspend) + return tmdev->ops->suspend(tmdev); +@@ -50,9 +51,10 @@ static int __maybe_unused tsens_suspend + return 0; + } + +-static int __maybe_unused tsens_resume(struct device *dev) ++static int __maybe_unused tsens_resume(void *data) + { +- struct tsens_device *tmdev = dev_get_drvdata(dev); ++ struct tsens_sensor *s = data; ++ struct tsens_device *tmdev = s->tmdev; + + if (tmdev->ops && tmdev->ops->resume) + return tmdev->ops->resume(tmdev); +@@ -60,6 +62,30 @@ static int __maybe_unused tsens_resume(s + return 0; + } + ++static int __maybe_unused tsens_set_trip_temp(void *data, int trip, int temp) ++{ ++ struct tsens_sensor *s = data; ++ struct tsens_device *tmdev = s->tmdev; ++ ++ if (tmdev->ops && tmdev->ops->set_trip_temp) ++ return tmdev->ops->set_trip_temp(s, trip, temp); ++ ++ return 0; ++} ++ ++static int __maybe_unused tsens_activate_trip_type(void *data, int trip, ++ enum thermal_trip_activation_mode mode) ++{ ++ struct tsens_sensor *s = data; ++ struct tsens_device *tmdev = s->tmdev; ++ ++ if (tmdev->ops && tmdev->ops->set_trip_activate) ++ return tmdev->ops->set_trip_activate(s, trip, mode); ++ ++ return 0; ++} ++ ++ + static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume); + + static const struct of_device_id tsens_table[] = { +@@ -83,6 +109,8 @@ MODULE_DEVICE_TABLE(of, tsens_table); + static const struct thermal_zone_of_device_ops tsens_of_ops = { + .get_temp = tsens_get_temp, + .get_trend = tsens_get_trend, ++ .set_trip_temp = tsens_set_trip_temp, ++ .set_trip_activate = tsens_activate_trip_type, + }; + + static int tsens_register(struct tsens_device *tmdev) +@@ -131,7 +159,7 @@ static int tsens_probe(struct platform_d + if (id) + data = id->data; + else +- data = &data_8960; ++ return -EINVAL; + + if (data->num_sensors <= 0) { + dev_err(dev, "invalid number of sensors\n"); +@@ -146,6 +174,9 @@ static int tsens_probe(struct platform_d + tmdev->dev = dev; + tmdev->num_sensors = data->num_sensors; + tmdev->ops = data->ops; ++ ++ tmdev->tsens_irq = platform_get_irq(pdev, 0); ++ + for (i = 0; i < tmdev->num_sensors; i++) { + if (data->hw_ids) + tmdev->sensor[i].hw_id = data->hw_ids[i]; +--- a/drivers/thermal/qcom/tsens.h ++++ b/drivers/thermal/qcom/tsens.h +@@ -24,9 +24,12 @@ struct tsens_device; + struct tsens_sensor { + struct tsens_device *tmdev; + struct thermal_zone_device *tzd; ++ struct work_struct notify_work; + int offset; + int id; + int hw_id; ++ int calib_data; ++ int calib_data_backup; + int slope; + u32 status; + }; +@@ -41,6 +44,9 @@ struct tsens_sensor { + * @suspend: Function to suspend the tsens device + * @resume: Function to resume the tsens device + * @get_trend: Function to get the thermal/temp trend ++ * @set_trip_temp: Function to set trip temp ++ * @get_trip_temp: Function to get trip temp ++ * @set_trip_activate: Function to activate trip points + */ + struct tsens_ops { + /* mandatory callbacks */ +@@ -53,6 +59,9 @@ struct tsens_ops { + int (*suspend)(struct tsens_device *); + int (*resume)(struct tsens_device *); + int (*get_trend)(struct tsens_device *, int, enum thermal_trend *); ++ int (*set_trip_temp)(void *, int, int); ++ int (*set_trip_activate)(void *, int, ++ enum thermal_trip_activation_mode); + }; + + /** +@@ -76,11 +85,13 @@ struct tsens_context { + struct tsens_device { + struct device *dev; + u32 num_sensors; ++ u32 tsens_irq; + struct regmap *map; + struct regmap_field *status_field; + struct tsens_context ctx; + bool trdy; + const struct tsens_ops *ops; ++ struct work_struct tsens_work; + struct tsens_sensor sensor[0]; + }; + +--- a/drivers/thermal/thermal_sysfs.c ++++ b/drivers/thermal/thermal_sysfs.c +@@ -115,12 +115,48 @@ + return sprintf(buf, "passive\n"); + case THERMAL_TRIP_ACTIVE: + return sprintf(buf, "active\n"); ++ case THERMAL_TRIP_CONFIGURABLE_HI: ++ return sprintf(buf, "configurable_hi\n"); ++ case THERMAL_TRIP_CONFIGURABLE_LOW: ++ return sprintf(buf, "configurable_low\n"); ++ case THERMAL_TRIP_CRITICAL_LOW: ++ return sprintf(buf, "critical_low\n"); + default: + return sprintf(buf, "unknown\n"); + } + } + + static ssize_t ++trip_point_type_activate(struct device *dev, struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct thermal_zone_device *tz = to_thermal_zone(dev); ++ int trip, ret; ++ char *enabled = "enabled"; ++ char *disabled = "disabled"; ++ ++ if (!tz->ops->set_trip_activate) ++ return -EPERM; ++ ++ if (!sscanf(attr->attr.name, "trip_point_%d_type", &trip)) ++ return -EINVAL; ++ ++ if (!strncmp(buf, enabled, strlen(enabled))) ++ ret = tz->ops->set_trip_activate(tz, trip, ++ THERMAL_TRIP_ACTIVATION_ENABLED); ++ else if (!strncmp(buf, disabled, strlen(disabled))) ++ ret = tz->ops->set_trip_activate(tz, trip, ++ THERMAL_TRIP_ACTIVATION_DISABLED); ++ else ++ ret = -EINVAL; ++ ++ if (ret) ++ return ret; ++ ++ return count; ++} ++ ++static ssize_t + trip_point_temp_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) + { +@@ -562,6 +598,12 @@ + tz->trip_type_attrs[indx].attr.show = trip_point_type_show; + attrs[indx] = &tz->trip_type_attrs[indx].attr.attr; + ++ if (IS_ENABLED(CONFIG_THERMAL_WRITABLE_TRIPS)) { ++ tz->trip_type_attrs[indx].attr.store ++ = trip_point_type_activate; ++ tz->trip_type_attrs[indx].attr.attr.mode |= S_IWUSR; ++ } ++ + /* create trip temp attribute */ + snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH, + "trip_point_%d_temp", indx); +--- a/include/linux/thermal.h ++++ b/include/linux/thermal.h +@@ -78,11 +78,19 @@ enum thermal_device_mode { + THERMAL_DEVICE_ENABLED, + }; + ++enum thermal_trip_activation_mode { ++ THERMAL_TRIP_ACTIVATION_DISABLED = 0, ++ THERMAL_TRIP_ACTIVATION_ENABLED, ++}; ++ + enum thermal_trip_type { + THERMAL_TRIP_ACTIVE = 0, + THERMAL_TRIP_PASSIVE, + THERMAL_TRIP_HOT, + THERMAL_TRIP_CRITICAL, ++ THERMAL_TRIP_CONFIGURABLE_HI, ++ THERMAL_TRIP_CONFIGURABLE_LOW, ++ THERMAL_TRIP_CRITICAL_LOW, + }; + + enum thermal_trend { +@@ -120,6 +128,8 @@ struct thermal_zone_device_ops { + enum thermal_trip_type *); + int (*get_trip_temp) (struct thermal_zone_device *, int, int *); + int (*set_trip_temp) (struct thermal_zone_device *, int, int); ++ int (*set_trip_activate) (struct thermal_zone_device *, int, ++ enum thermal_trip_activation_mode); + int (*get_trip_hyst) (struct thermal_zone_device *, int, int *); + int (*set_trip_hyst) (struct thermal_zone_device *, int, int); + int (*get_crit_temp) (struct thermal_zone_device *, int *); +@@ -363,6 +373,8 @@ struct thermal_genl_event { + * temperature. + * @set_trip_temp: a pointer to a function that sets the trip temperature on + * hardware. ++ * @activate_trip_type: a pointer to a function to enable/disable trip ++ * temperature interrupts + */ + struct thermal_zone_of_device_ops { + int (*get_temp)(void *, int *); +@@ -370,6 +382,8 @@ struct thermal_zone_of_device_ops { + int (*set_trips)(void *, int, int); + int (*set_emul_temp)(void *, int); + int (*set_trip_temp)(void *, int, int); ++ int (*set_trip_activate)(void *, int, ++ enum thermal_trip_activation_mode); + }; + + /** diff --git a/target/linux/ipq806x/patches-4.14/0064-clk-clk-rpm-fixes.patch b/target/linux/ipq806x/patches-4.14/0064-clk-clk-rpm-fixes.patch new file mode 100644 index 0000000000..8a6bc1aca9 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0064-clk-clk-rpm-fixes.patch @@ -0,0 +1,93 @@ +From d30840e2b1cf79d90392e6051b0c0b6006d29d8b Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 9 Mar 2017 09:32:40 +0100 +Subject: [PATCH 64/69] clk: clk-rpm fixes + +Signed-off-by: John Crispin +--- + .../devicetree/bindings/clock/qcom,rpmcc.txt | 1 + + drivers/clk/qcom/clk-rpm.c | 35 ++++++++++++++++++++++ + include/dt-bindings/clock/qcom,rpmcc.h | 4 +++ + 3 files changed, 40 insertions(+) + +--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt ++++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt +@@ -13,6 +13,7 @@ Required properties : + "qcom,rpmcc-msm8916", "qcom,rpmcc" + "qcom,rpmcc-msm8974", "qcom,rpmcc" + "qcom,rpmcc-apq8064", "qcom,rpmcc" ++ "qcom,rpmcc-ipq806x", "qcom,rpmcc" + + - #clock-cells : shall contain 1 + +--- a/drivers/clk/qcom/clk-rpm.c ++++ b/drivers/clk/qcom/clk-rpm.c +@@ -359,6 +359,16 @@ DEFINE_CLK_RPM(apq8064, sfab_clk, sfab_a + DEFINE_CLK_RPM(apq8064, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK); + DEFINE_CLK_RPM(apq8064, qdss_clk, qdss_a_clk, QCOM_RPM_QDSS_CLK); + ++/* ipq806x */ ++DEFINE_CLK_RPM(ipq806x, afab_clk, afab_a_clk, QCOM_RPM_APPS_FABRIC_CLK); ++DEFINE_CLK_RPM(ipq806x, cfpb_clk, cfpb_a_clk, QCOM_RPM_CFPB_CLK); ++DEFINE_CLK_RPM(ipq806x, daytona_clk, daytona_a_clk, QCOM_RPM_DAYTONA_FABRIC_CLK); ++DEFINE_CLK_RPM(ipq806x, ebi1_clk, ebi1_a_clk, QCOM_RPM_EBI1_CLK); ++DEFINE_CLK_RPM(ipq806x, sfab_clk, sfab_a_clk, QCOM_RPM_SYS_FABRIC_CLK); ++DEFINE_CLK_RPM(ipq806x, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK); ++DEFINE_CLK_RPM(ipq806x, nss_fabric_0_clk, nss_fabric_0_a_clk, QCOM_RPM_NSS_FABRIC_0_CLK); ++DEFINE_CLK_RPM(ipq806x, nss_fabric_1_clk, nss_fabric_1_a_clk, QCOM_RPM_NSS_FABRIC_1_CLK); ++ + static struct clk_rpm *apq8064_clks[] = { + [RPM_APPS_FABRIC_CLK] = &apq8064_afab_clk, + [RPM_APPS_FABRIC_A_CLK] = &apq8064_afab_a_clk, +@@ -380,13 +390,38 @@ static struct clk_rpm *apq8064_clks[] = + [RPM_QDSS_A_CLK] = &apq8064_qdss_a_clk, + }; + ++static struct clk_rpm *ipq806x_clks[] = { ++ [RPM_APPS_FABRIC_CLK] = &ipq806x_afab_clk, ++ [RPM_APPS_FABRIC_A_CLK] = &ipq806x_afab_a_clk, ++ [RPM_CFPB_CLK] = &ipq806x_cfpb_clk, ++ [RPM_CFPB_A_CLK] = &ipq806x_cfpb_a_clk, ++ [RPM_DAYTONA_FABRIC_CLK] = &ipq806x_daytona_clk, ++ [RPM_DAYTONA_FABRIC_A_CLK] = &ipq806x_daytona_a_clk, ++ [RPM_EBI1_CLK] = &ipq806x_ebi1_clk, ++ [RPM_EBI1_A_CLK] = &ipq806x_ebi1_a_clk, ++ [RPM_SYS_FABRIC_CLK] = &ipq806x_sfab_clk, ++ [RPM_SYS_FABRIC_A_CLK] = &ipq806x_sfab_a_clk, ++ [RPM_SFPB_CLK] = &ipq806x_sfpb_clk, ++ [RPM_SFPB_A_CLK] = &ipq806x_sfpb_a_clk, ++ [RPM_NSS_FABRIC_0_CLK] = &ipq806x_nss_fabric_0_clk, ++ [RPM_NSS_FABRIC_0_A_CLK] = &ipq806x_nss_fabric_0_a_clk, ++ [RPM_NSS_FABRIC_1_CLK] = &ipq806x_nss_fabric_1_clk, ++ [RPM_NSS_FABRIC_1_A_CLK] = &ipq806x_nss_fabric_1_a_clk, ++}; ++ + static const struct rpm_clk_desc rpm_clk_apq8064 = { + .clks = apq8064_clks, + .num_clks = ARRAY_SIZE(apq8064_clks), + }; + ++static const struct rpm_clk_desc rpm_clk_ipq806x = { ++ .clks = ipq806x_clks, ++ .num_clks = ARRAY_SIZE(ipq806x_clks), ++}; ++ + static const struct of_device_id rpm_clk_match_table[] = { + { .compatible = "qcom,rpmcc-apq8064", .data = &rpm_clk_apq8064 }, ++ { .compatible = "qcom,rpmcc-ipq806x", .data = &rpm_clk_ipq806x }, + { } + }; + MODULE_DEVICE_TABLE(of, rpm_clk_match_table); +--- a/include/dt-bindings/clock/qcom,rpmcc.h ++++ b/include/dt-bindings/clock/qcom,rpmcc.h +@@ -37,6 +37,10 @@ + #define RPM_SYS_FABRIC_A_CLK 19 + #define RPM_SFPB_CLK 20 + #define RPM_SFPB_A_CLK 21 ++#define RPM_NSS_FABRIC_0_CLK 22 ++#define RPM_NSS_FABRIC_0_A_CLK 23 ++#define RPM_NSS_FABRIC_1_CLK 24 ++#define RPM_NSS_FABRIC_1_A_CLK 25 + + /* SMD RPM clocks */ + #define RPM_SMD_XO_CLK_SRC 0 diff --git a/target/linux/ipq806x/patches-4.14/0065-arm-override-compiler-flags.patch b/target/linux/ipq806x/patches-4.14/0065-arm-override-compiler-flags.patch new file mode 100644 index 0000000000..0d2a4274c7 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0065-arm-override-compiler-flags.patch @@ -0,0 +1,21 @@ +From 4d8e29642661397a339ac3485f212c6360445421 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 9 Mar 2017 09:33:32 +0100 +Subject: [PATCH 65/69] arm: override compiler flags + +Signed-off-by: John Crispin +--- + arch/arm/Makefile | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm/Makefile ++++ b/arch/arm/Makefile +@@ -67,7 +67,7 @@ KBUILD_CFLAGS += $(call cc-option,-fno-i + # macro, but instead defines a whole series of macros which makes + # testing for a specific architecture or later rather impossible. + arch-$(CONFIG_CPU_32v7M) =-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m +-arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a) ++arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 -mcpu=cortex-a15 + arch-$(CONFIG_CPU_32v6) =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6) + # Only override the compiler option if ARMv6. The ARMv6K extensions are + # always available in ARMv7 diff --git a/target/linux/ipq806x/patches-4.14/0066-GPIO-add-named-gpio-exports.patch b/target/linux/ipq806x/patches-4.14/0066-GPIO-add-named-gpio-exports.patch new file mode 100644 index 0000000000..992c240d62 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0066-GPIO-add-named-gpio-exports.patch @@ -0,0 +1,166 @@ +From a37b0c9113647b2120cf1a18cfc46afdb3f1fccc Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Tue, 12 Aug 2014 20:49:27 +0200 +Subject: [PATCH 66/69] GPIO: add named gpio exports + +Signed-off-by: John Crispin +--- + drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++++ + drivers/gpio/gpiolib-sysfs.c | 10 ++++++- + include/asm-generic/gpio.h | 6 ++++ + include/linux/gpio/consumer.h | 8 +++++ + 4 files changed, 91 insertions(+), 1 deletion(-) + +--- a/drivers/gpio/gpiolib-of.c ++++ b/drivers/gpio/gpiolib-of.c +@@ -23,6 +23,8 @@ + #include + #include + #include ++#include ++#include + + #include "gpiolib.h" + +@@ -506,3 +508,69 @@ void of_gpiochip_remove(struct gpio_chip + gpiochip_remove_pin_ranges(chip); + of_node_put(chip->of_node); + } ++ ++static struct of_device_id gpio_export_ids[] = { ++ { .compatible = "gpio-export" }, ++ { /* sentinel */ } ++}; ++ ++static int __init of_gpio_export_probe(struct platform_device *pdev) ++{ ++ struct device_node *np = pdev->dev.of_node; ++ struct device_node *cnp; ++ u32 val; ++ int nb = 0; ++ ++ for_each_child_of_node(np, cnp) { ++ const char *name = NULL; ++ int gpio; ++ bool dmc; ++ int max_gpio = 1; ++ int i; ++ ++ of_property_read_string(cnp, "gpio-export,name", &name); ++ ++ if (!name) ++ max_gpio = of_gpio_count(cnp); ++ ++ for (i = 0; i < max_gpio; i++) { ++ unsigned flags = 0; ++ enum of_gpio_flags of_flags; ++ ++ gpio = of_get_gpio_flags(cnp, i, &of_flags); ++ ++ if (of_flags == OF_GPIO_ACTIVE_LOW) ++ flags |= GPIOF_ACTIVE_LOW; ++ ++ if (!of_property_read_u32(cnp, "gpio-export,output", &val)) ++ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; ++ else ++ flags |= GPIOF_IN; ++ ++ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np))) ++ continue; ++ ++ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change"); ++ gpio_export_with_name(gpio, dmc, name); ++ nb++; ++ } ++ } ++ ++ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb); ++ ++ return 0; ++} ++ ++static struct platform_driver gpio_export_driver = { ++ .driver = { ++ .name = "gpio-export", ++ .owner = THIS_MODULE, ++ .of_match_table = of_match_ptr(gpio_export_ids), ++ }, ++}; ++ ++static int __init of_gpio_export_init(void) ++{ ++ return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe); ++} ++device_initcall(of_gpio_export_init); +--- a/drivers/gpio/gpiolib-sysfs.c ++++ b/drivers/gpio/gpiolib-sysfs.c +@@ -553,7 +553,7 @@ static struct class gpio_class = { + * + * Returns zero on success, else an error. + */ +-int gpiod_export(struct gpio_desc *desc, bool direction_may_change) ++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name) + { + struct gpio_chip *chip; + struct gpio_device *gdev; +@@ -615,6 +615,8 @@ int gpiod_export(struct gpio_desc *desc, + offset = gpio_chip_hwgpio(desc); + if (chip->names && chip->names[offset]) + ioname = chip->names[offset]; ++ if (name) ++ ioname = name; + + dev = device_create_with_groups(&gpio_class, &gdev->dev, + MKDEV(0, 0), data, gpio_groups, +@@ -636,6 +638,12 @@ err_unlock: + gpiod_dbg(desc, "%s: status %d\n", __func__, status); + return status; + } ++EXPORT_SYMBOL_GPL(__gpiod_export); ++ ++int gpiod_export(struct gpio_desc *desc, bool direction_may_change) ++{ ++ return __gpiod_export(desc, direction_may_change, NULL); ++} + EXPORT_SYMBOL_GPL(gpiod_export); + + static int match_export(struct device *dev, const void *desc) +--- a/include/asm-generic/gpio.h ++++ b/include/asm-generic/gpio.h +@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g + return gpiod_export(gpio_to_desc(gpio), direction_may_change); + } + ++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name); ++static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name) ++{ ++ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name); ++} ++ + static inline int gpio_export_link(struct device *dev, const char *name, + unsigned gpio) + { +--- a/include/linux/gpio/consumer.h ++++ b/include/linux/gpio/consumer.h +@@ -451,6 +451,7 @@ static inline struct gpio_desc *devm_get + + #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS) + ++int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name); + int gpiod_export(struct gpio_desc *desc, bool direction_may_change); + int gpiod_export_link(struct device *dev, const char *name, + struct gpio_desc *desc); +@@ -458,6 +459,13 @@ void gpiod_unexport(struct gpio_desc *de + + #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */ + ++static inline int _gpiod_export(struct gpio_desc *desc, ++ bool direction_may_change, ++ const char *name) ++{ ++ return -ENOSYS; ++} ++ + static inline int gpiod_export(struct gpio_desc *desc, + bool direction_may_change) + { diff --git a/target/linux/ipq806x/patches-4.14/0067-generic-Mangle-bootloader-s-kernel-arguments.patch b/target/linux/ipq806x/patches-4.14/0067-generic-Mangle-bootloader-s-kernel-arguments.patch new file mode 100644 index 0000000000..98c2ba1faa --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0067-generic-Mangle-bootloader-s-kernel-arguments.patch @@ -0,0 +1,189 @@ +From 71270226b14733a4b1f2cde58ea9265caa50b38d Mon Sep 17 00:00:00 2001 +From: Adrian Panella +Date: Thu, 9 Mar 2017 09:37:17 +0100 +Subject: [PATCH 67/69] generic: Mangle bootloader's kernel arguments + +The command-line arguments provided by the boot loader will be +appended to a new device tree property: bootloader-args. +If there is a property "append-rootblock" in DT under /chosen +and a root= option in bootloaders command line it will be parsed +and added to DT bootargs with the form: XX. +Only command line ATAG will be processed, the rest of the ATAGs +sent by bootloader will be ignored. +This is usefull in dual boot systems, to get the current root partition +without afecting the rest of the system. + +Signed-off-by: Adrian Panella +--- + arch/arm/Kconfig | 11 +++++ + arch/arm/boot/compressed/atags_to_fdt.c | 72 ++++++++++++++++++++++++++++++++- + init/main.c | 16 ++++++++ + 3 files changed, 98 insertions(+), 1 deletion(-) + +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -1938,6 +1938,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN + The command-line arguments provided by the boot loader will be + appended to the the device tree bootargs property. + ++config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE ++ bool "Append rootblock parsing bootloader's kernel arguments" ++ help ++ The command-line arguments provided by the boot loader will be ++ appended to a new device tree property: bootloader-args. ++ If there is a property "append-rootblock" in DT under /chosen ++ and a root= option in bootloaders command line it will be parsed ++ and added to DT bootargs with the form: XX. ++ Only command line ATAG will be processed, the rest of the ATAGs ++ sent by bootloader will be ignored. ++ + endchoice + + config CMDLINE +--- a/arch/arm/boot/compressed/atags_to_fdt.c ++++ b/arch/arm/boot/compressed/atags_to_fdt.c +@@ -4,6 +4,8 @@ + + #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND) + #define do_extend_cmdline 1 ++#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) ++#define do_extend_cmdline 1 + #else + #define do_extend_cmdline 0 + #endif +@@ -67,6 +69,59 @@ static uint32_t get_cell_size(const void + return cell_size; + } + ++#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) ++ ++static char *append_rootblock(char *dest, const char *str, int len, void *fdt) ++{ ++ char *ptr, *end; ++ char *root="root="; ++ int i, l; ++ const char *rootblock; ++ ++ //ARM doesn't have __HAVE_ARCH_STRSTR, so search manually ++ ptr = str - 1; ++ ++ do { ++ //first find an 'r' at the begining or after a space ++ do { ++ ptr++; ++ ptr = strchr(ptr, 'r'); ++ if(!ptr) return dest; ++ ++ } while (ptr != str && *(ptr-1) != ' '); ++ ++ //then check for the rest ++ for(i = 1; i <= 4; i++) ++ if(*(ptr+i) != *(root+i)) break; ++ ++ } while (i != 5); ++ ++ end = strchr(ptr, ' '); ++ end = end ? (end - 1) : (strchr(ptr, 0) - 1); ++ ++ //find partition number (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX ) ++ for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++); ++ ptr = end + 1; ++ ++ /* if append-rootblock property is set use it to append to command line */ ++ rootblock = getprop(fdt, "/chosen", "append-rootblock", &l); ++ if(rootblock != NULL) { ++ if(*dest != ' ') { ++ *dest = ' '; ++ dest++; ++ len++; ++ } ++ if (len + l + i <= COMMAND_LINE_SIZE) { ++ memcpy(dest, rootblock, l); ++ dest += l - 1; ++ memcpy(dest, ptr, i); ++ dest += i; ++ } ++ } ++ return dest; ++} ++#endif ++ + static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline) + { + char cmdline[COMMAND_LINE_SIZE]; +@@ -86,12 +141,21 @@ static void merge_fdt_bootargs(void *fdt + + /* and append the ATAG_CMDLINE */ + if (fdt_cmdline) { ++ ++#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) ++ //save original bootloader args ++ //and append ubi.mtd with root partition number to current cmdline ++ setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline); ++ ptr = append_rootblock(ptr, fdt_cmdline, len, fdt); ++ ++#else + len = strlen(fdt_cmdline); + if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) { + *ptr++ = ' '; + memcpy(ptr, fdt_cmdline, len); + ptr += len; + } ++#endif + } + *ptr = '\0'; + +@@ -148,7 +212,9 @@ int atags_to_fdt(void *atag_list, void * + else + setprop_string(fdt, "/chosen", "bootargs", + atag->u.cmdline.cmdline); +- } else if (atag->hdr.tag == ATAG_MEM) { ++ } ++#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE ++ else if (atag->hdr.tag == ATAG_MEM) { + if (memcount >= sizeof(mem_reg_property)/4) + continue; + if (!atag->u.mem.size) +@@ -187,6 +253,10 @@ int atags_to_fdt(void *atag_list, void * + setprop(fdt, "/memory", "reg", mem_reg_property, + 4 * memcount * memsize); + } ++#else ++ ++ } ++#endif + + return fdt_pack(fdt); + } +--- a/init/main.c ++++ b/init/main.c +@@ -95,6 +95,10 @@ + #include + #include + ++#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) ++#include ++#endif ++ + static int kernel_init(void *); + + extern void init_IRQ(void); +@@ -574,6 +578,18 @@ asmlinkage __visible void __init start_k + page_alloc_init(); + + pr_notice("Kernel command line: %s\n", boot_command_line); ++ ++#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) ++ //Show bootloader's original command line for reference ++ if(of_chosen) { ++ const char *prop = of_get_property(of_chosen, "bootloader-args", NULL); ++ if(prop) ++ pr_notice("Bootloader command line (ignored): %s\n", prop); ++ else ++ pr_notice("Bootloader command line not present\n"); ++ } ++#endif ++ + parse_early_param(); + after_dashes = parse_args("Booting kernel", + static_command_line, __start___param, diff --git a/target/linux/ipq806x/patches-4.14/0069-arm-boot-add-dts-files.patch b/target/linux/ipq806x/patches-4.14/0069-arm-boot-add-dts-files.patch new file mode 100644 index 0000000000..d9cd2bb7d2 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0069-arm-boot-add-dts-files.patch @@ -0,0 +1,28 @@ +From 8f68331e14dff9a101f2d0e1d6bec84a031f27ee Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 9 Mar 2017 11:03:18 +0100 +Subject: [PATCH 69/69] arm: boot: add dts files + +Signed-off-by: John Crispin +--- + arch/arm/boot/dts/Makefile | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -699,6 +699,15 @@ dtb-$(CONFIG_ARCH_QCOM) += \ + qcom-apq8084-mtp.dtb \ + qcom-ipq4019-ap.dk01.1-c1.dtb \ + qcom-ipq8064-ap148.dtb \ ++ qcom-ipq8064-c2600.dtb \ ++ qcom-ipq8064-d7800.dtb \ ++ qcom-ipq8064-db149.dtb \ ++ qcom-ipq8064-ea8500.dtb \ ++ qcom-ipq8064-r7500.dtb \ ++ qcom-ipq8064-r7500v2.dtb \ ++ qcom-ipq8064-wpq864.dtb \ ++ qcom-ipq8065-nbg6817.dtb \ ++ qcom-ipq8065-r7800.dtb \ + qcom-msm8660-surf.dtb \ + qcom-msm8960-cdp.dtb \ + qcom-msm8974-lge-nexus5-hammerhead.dtb \ diff --git a/target/linux/ipq806x/patches-4.14/0070-qcom-spm-fix-probe-order.patch b/target/linux/ipq806x/patches-4.14/0070-qcom-spm-fix-probe-order.patch new file mode 100644 index 0000000000..78bc5fc3e3 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0070-qcom-spm-fix-probe-order.patch @@ -0,0 +1,16 @@ +Check for SCM availability before attempting to use SPM + +Signed-off-by: Felix Fietkau + +--- a/drivers/soc/qcom/spm.c ++++ b/drivers/soc/qcom/spm.c +@@ -219,6 +219,9 @@ static int __init qcom_cpuidle_init(stru + cpumask_t mask; + bool use_scm_power_down = false; + ++ if (!qcom_scm_is_available()) ++ return -EPROBE_DEFER; ++ + for (i = 0; ; i++) { + state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i); + if (!state_node) diff --git a/target/linux/ipq806x/patches-4.14/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch b/target/linux/ipq806x/patches-4.14/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch new file mode 100644 index 0000000000..550c92e27c --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch @@ -0,0 +1,95 @@ +From 86655aa14304ca88a8ce8847276147dbc1a83238 Mon Sep 17 00:00:00 2001 +From: Sham Muthayyan +Date: Tue, 19 Jul 2016 18:44:49 +0530 +Subject: PCI: qcom: Fixed IPQ806x specific clocks + +Change-Id: I488e1bc707d6a22b37a338f41935e3922009ba5e +Signed-off-by: Sham Muthayyan +--- + drivers/pci/host/pcie-qcom.c | 38 +++++++++++++++++++++++++++++++++----- + 1 file changed, 33 insertions(+), 5 deletions(-) + +--- a/drivers/pci/dwc/pcie-qcom.c ++++ b/drivers/pci/dwc/pcie-qcom.c +@@ -91,6 +91,8 @@ + struct clk *iface_clk; + struct clk *core_clk; + struct clk *phy_clk; ++ struct clk *aux_clk; ++ struct clk *ref_clk; + struct reset_control *pci_reset; + struct reset_control *axi_reset; + struct reset_control *ahb_reset; +@@ -249,6 +251,14 @@ + if (IS_ERR(res->phy_clk)) + return PTR_ERR(res->phy_clk); + ++ res->aux_clk = devm_clk_get(dev, "aux"); ++ if (IS_ERR(res->aux_clk)) ++ return PTR_ERR(res->aux_clk); ++ ++ res->ref_clk = devm_clk_get(dev, "ref"); ++ if (IS_ERR(res->ref_clk)) ++ return PTR_ERR(res->ref_clk); ++ + res->pci_reset = devm_reset_control_get_exclusive(dev, "pci"); + if (IS_ERR(res->pci_reset)) + return PTR_ERR(res->pci_reset); +@@ -281,6 +291,8 @@ + clk_disable_unprepare(res->iface_clk); + clk_disable_unprepare(res->core_clk); + clk_disable_unprepare(res->phy_clk); ++ clk_disable_unprepare(res->aux_clk); ++ clk_disable_unprepare(res->ref_clk); + regulator_disable(res->vdda); + regulator_disable(res->vdda_phy); + regulator_disable(res->vdda_refclk); +@@ -324,16 +336,28 @@ + goto err_assert_ahb; + } + ++ ret = clk_prepare_enable(res->core_clk); ++ if (ret) { ++ dev_err(dev, "cannot prepare/enable core clock\n"); ++ goto err_clk_core; ++ } ++ + ret = clk_prepare_enable(res->phy_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable phy clock\n"); + goto err_clk_phy; + } + +- ret = clk_prepare_enable(res->core_clk); ++ ret = clk_prepare_enable(res->aux_clk); + if (ret) { +- dev_err(dev, "cannot prepare/enable core clock\n"); +- goto err_clk_core; ++ dev_err(dev, "cannot prepare/enable aux clock\n"); ++ goto err_clk_aux; ++ } ++ ++ ret = clk_prepare_enable(res->ref_clk); ++ if (ret) { ++ dev_err(dev, "cannot prepare/enable ref clock\n"); ++ goto err_clk_ref; + } + + ret = reset_control_deassert(res->ahb_reset); +@@ -389,10 +413,14 @@ + return 0; + + err_deassert_ahb: +- clk_disable_unprepare(res->core_clk); +-err_clk_core: ++ clk_disable_unprepare(res->ref_clk); ++err_clk_ref: ++ clk_disable_unprepare(res->aux_clk); ++err_clk_aux: + clk_disable_unprepare(res->phy_clk); + err_clk_phy: ++ clk_disable_unprepare(res->core_clk); ++err_clk_core: + clk_disable_unprepare(res->iface_clk); + err_assert_ahb: + regulator_disable(res->vdda_phy); diff --git a/target/linux/ipq806x/patches-4.14/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch b/target/linux/ipq806x/patches-4.14/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch new file mode 100644 index 0000000000..a2ae1e064b --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch @@ -0,0 +1,85 @@ +From 490d103232287eb51c92c49a4ef8865fd0a9d59e Mon Sep 17 00:00:00 2001 +From: Sham Muthayyan +Date: Tue, 19 Jul 2016 18:58:18 +0530 +Subject: PCI: qcom: Fixed IPQ806x PCIE reset changes + +Change-Id: Ia6590e960b9754b1e8b7a51f318788cd63e9e321 +Signed-off-by: Sham Muthayyan +--- + drivers/pci/host/pcie-qcom.c | 24 +++++++++++++++++++----- + 1 file changed, 19 insertions(+), 5 deletions(-) + +--- a/drivers/pci/dwc/pcie-qcom.c ++++ b/drivers/pci/dwc/pcie-qcom.c +@@ -98,6 +98,7 @@ + struct reset_control *ahb_reset; + struct reset_control *por_reset; + struct reset_control *phy_reset; ++ struct reset_control *ext_reset; + struct regulator *vdda; + struct regulator *vdda_phy; + struct regulator *vdda_refclk; +@@ -275,6 +276,10 @@ + if (IS_ERR(res->por_reset)) + return PTR_ERR(res->por_reset); + ++ res->ext_reset = devm_reset_control_get(dev, "ext"); ++ if (IS_ERR(res->ext_reset)) ++ return PTR_ERR(res->ext_reset); ++ + res->phy_reset = devm_reset_control_get_exclusive(dev, "phy"); + return PTR_ERR_OR_ZERO(res->phy_reset); + } +@@ -288,6 +293,7 @@ + reset_control_assert(res->ahb_reset); + reset_control_assert(res->por_reset); + reset_control_assert(res->pci_reset); ++ reset_control_assert(res->ext_reset); + clk_disable_unprepare(res->iface_clk); + clk_disable_unprepare(res->core_clk); + clk_disable_unprepare(res->phy_clk); +@@ -306,6 +312,12 @@ + u32 val; + int ret; + ++ ret = reset_control_assert(res->ahb_reset); ++ if (ret) { ++ dev_err(dev, "cannot assert ahb reset\n"); ++ return ret; ++ } ++ + ret = regulator_enable(res->vdda); + if (ret) { + dev_err(dev, "cannot enable vdda regulator\n"); +@@ -324,16 +336,16 @@ + goto err_vdda_phy; + } + +- ret = reset_control_assert(res->ahb_reset); ++ ret = reset_control_deassert(res->ext_reset); + if (ret) { +- dev_err(dev, "cannot assert ahb reset\n"); +- goto err_assert_ahb; ++ dev_err(dev, "cannot assert ext reset\n"); ++ goto err_reset_ext; + } + + ret = clk_prepare_enable(res->iface_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable iface clock\n"); +- goto err_assert_ahb; ++ goto err_iface; + } + + ret = clk_prepare_enable(res->core_clk); +@@ -422,7 +434,9 @@ + clk_disable_unprepare(res->core_clk); + err_clk_core: + clk_disable_unprepare(res->iface_clk); +-err_assert_ahb: ++err_iface: ++ reset_control_assert(res->ext_reset); ++err_reset_ext: + regulator_disable(res->vdda_phy); + err_vdda_phy: + regulator_disable(res->vdda_refclk); diff --git a/target/linux/ipq806x/patches-4.14/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch b/target/linux/ipq806x/patches-4.14/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch new file mode 100644 index 0000000000..0c2910f3af --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch @@ -0,0 +1,126 @@ +From eddd13215d0f2b549ebc5f0e8796d5b1231f90a0 Mon Sep 17 00:00:00 2001 +From: Sham Muthayyan +Date: Tue, 19 Jul 2016 19:58:22 +0530 +Subject: PCI: qcom: Fixed IPQ806x PCIE init changes + +Change-Id: Ic319b1aec27a47809284759f8fcb6a8815b7cf7e +Signed-off-by: Sham Muthayyan +--- + drivers/pci/host/pcie-qcom.c | 62 +++++++++++++++++++++++++++++++++++++------- + 1 file changed, 53 insertions(+), 9 deletions(-) + +--- a/drivers/pci/dwc/pcie-qcom.c ++++ b/drivers/pci/dwc/pcie-qcom.c +@@ -52,7 +52,13 @@ + #define PCIE_CAP_CPL_TIMEOUT_DISABLE 0x10 + + #define PCIE20_PARF_PHY_CTRL 0x40 ++#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK (0x1f << 16) ++#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) (x << 16) ++ + #define PCIE20_PARF_PHY_REFCLK 0x4C ++#define REF_SSP_EN BIT(16) ++#define REF_USE_PAD BIT(12) ++ + #define PCIE20_PARF_DBI_BASE_ADDR 0x168 + #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16C + #define PCIE20_PARF_MHI_CLOCK_RESET_CTRL 0x174 +@@ -83,6 +89,18 @@ + #define DBI_RO_WR_EN 1 + + #define PERST_DELAY_US 1000 ++/* PARF registers */ ++#define PCIE20_PARF_PCS_DEEMPH 0x34 ++#define PCS_DEEMPH_TX_DEEMPH_GEN1(x) (x << 16) ++#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x) (x << 8) ++#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x) (x << 0) ++ ++#define PCIE20_PARF_PCS_SWING 0x38 ++#define PCS_SWING_TX_SWING_FULL(x) (x << 8) ++#define PCS_SWING_TX_SWING_LOW(x) (x << 0) ++ ++#define PCIE20_PARF_CONFIG_BITS 0x50 ++#define PHY_RX0_EQ(x) (x << 24) + + #define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358 + #define SLV_ADDR_SPACE_SZ 0x10000000 +@@ -102,6 +120,7 @@ + struct regulator *vdda; + struct regulator *vdda_phy; + struct regulator *vdda_refclk; ++ uint8_t phy_tx0_term_offset; + }; + + struct qcom_pcie_resources_1_0_0 { +@@ -179,6 +198,16 @@ + + #define to_qcom_pcie(x) dev_get_drvdata((x)->dev) + ++static inline void ++writel_masked(void __iomem *addr, u32 clear_mask, u32 set_mask) ++{ ++ u32 val = readl(addr); ++ ++ val &= ~clear_mask; ++ val |= set_mask; ++ writel(val, addr); ++} ++ + static void qcom_ep_reset_assert(struct qcom_pcie *pcie) + { + gpiod_set_value_cansleep(pcie->reset, 1); +@@ -280,6 +309,10 @@ + if (IS_ERR(res->ext_reset)) + return PTR_ERR(res->ext_reset); + ++ if (of_property_read_u8(dev->of_node, "phy-tx0-term-offset", ++ &res->phy_tx0_term_offset)) ++ res->phy_tx0_term_offset = 0; ++ + res->phy_reset = devm_reset_control_get_exclusive(dev, "phy"); + return PTR_ERR_OR_ZERO(res->phy_reset); + } +@@ -309,7 +342,6 @@ + struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0; + struct dw_pcie *pci = pcie->pci; + struct device *dev = pci->dev; +- u32 val; + int ret; + + ret = reset_control_assert(res->ahb_reset); +@@ -378,15 +410,26 @@ + goto err_deassert_ahb; + } + +- /* enable PCIe clocks and resets */ +- val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); +- val &= ~BIT(0); +- writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); +- +- /* enable external reference clock */ +- val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK); +- val |= BIT(16); +- writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK); ++ writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL, BIT(0), 0); ++ ++ /* Set Tx termination offset */ ++ writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL, ++ PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK, ++ PHY_CTRL_PHY_TX0_TERM_OFFSET(res->phy_tx0_term_offset)); ++ ++ /* PARF programming */ ++ writel(PCS_DEEMPH_TX_DEEMPH_GEN1(0x18) | ++ PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(0x18) | ++ PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(0x22), ++ pcie->parf + PCIE20_PARF_PCS_DEEMPH); ++ writel(PCS_SWING_TX_SWING_FULL(0x78) | ++ PCS_SWING_TX_SWING_LOW(0x78), ++ pcie->parf + PCIE20_PARF_PCS_SWING); ++ writel(PHY_RX0_EQ(0x4), pcie->parf + PCIE20_PARF_CONFIG_BITS); ++ ++ /* Enable reference clock */ ++ writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK, ++ REF_USE_PAD, REF_SSP_EN); + + ret = reset_control_deassert(res->phy_reset); + if (ret) { diff --git a/target/linux/ipq806x/patches-4.14/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch b/target/linux/ipq806x/patches-4.14/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch new file mode 100644 index 0000000000..1b19d6fcc2 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch @@ -0,0 +1,114 @@ +From d27c303e828d7e42f339a459d2abfe30c51698e9 Mon Sep 17 00:00:00 2001 +From: Sham Muthayyan +Date: Tue, 26 Jul 2016 12:28:31 +0530 +Subject: PCI: qcom: Programming the PCIE iATU for IPQ806x + +Resolved PCIE EP detection errors caused due to missing iATU programming. + +Change-Id: Ie95c0f8cb940abc0192a8a3c4e825ddba54b72fe +Signed-off-by: Sham Muthayyan +--- + drivers/pci/host/pcie-qcom.c | 77 ++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 77 insertions(+) + +--- a/drivers/pci/dwc/pcie-qcom.c ++++ b/drivers/pci/dwc/pcie-qcom.c +@@ -83,6 +83,30 @@ + #define PCIE20_CAP_LINK_1 (PCIE20_CAP + 0x14) + #define PCIE_CAP_LINK1_VAL 0x2FD7F + ++#define PCIE20_CAP_LINKCTRLSTATUS (PCIE20_CAP + 0x10) ++ ++#define PCIE20_AXI_MSTR_RESP_COMP_CTRL0 0x818 ++#define PCIE20_AXI_MSTR_RESP_COMP_CTRL1 0x81c ++ ++#define PCIE20_PLR_IATU_VIEWPORT 0x900 ++#define PCIE20_PLR_IATU_REGION_OUTBOUND (0x0 << 31) ++#define PCIE20_PLR_IATU_REGION_INDEX(x) (x << 0) ++ ++#define PCIE20_PLR_IATU_CTRL1 0x904 ++#define PCIE20_PLR_IATU_TYPE_CFG0 (0x4 << 0) ++#define PCIE20_PLR_IATU_TYPE_MEM (0x0 << 0) ++ ++#define PCIE20_PLR_IATU_CTRL2 0x908 ++#define PCIE20_PLR_IATU_ENABLE BIT(31) ++ ++#define PCIE20_PLR_IATU_LBAR 0x90C ++#define PCIE20_PLR_IATU_UBAR 0x910 ++#define PCIE20_PLR_IATU_LAR 0x914 ++#define PCIE20_PLR_IATU_LTAR 0x918 ++#define PCIE20_PLR_IATU_UTAR 0x91c ++ ++#define MSM_PCIE_DEV_CFG_ADDR 0x01000000 ++ + #define PCIE20_PARF_Q2A_FLUSH 0x1AC + + #define PCIE20_MISC_CONTROL_1_REG 0x8BC +@@ -251,6 +275,57 @@ + writel(val, pcie->elbi + PCIE20_ELBI_SYS_CTRL); + } + ++static void qcom_pcie_prog_viewport_cfg0(struct qcom_pcie *pcie, u32 busdev) ++{ ++ struct pcie_port *pp = &pcie->pci->pp; ++ ++ /* ++ * program and enable address translation region 0 (device config ++ * address space); region type config; ++ * axi config address range to device config address range ++ */ ++ writel(PCIE20_PLR_IATU_REGION_OUTBOUND | ++ PCIE20_PLR_IATU_REGION_INDEX(0), ++ pcie->pci->dbi_base + PCIE20_PLR_IATU_VIEWPORT); ++ ++ writel(PCIE20_PLR_IATU_TYPE_CFG0, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL1); ++ writel(PCIE20_PLR_IATU_ENABLE, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL2); ++ writel(pp->cfg0_base, pcie->pci->dbi_base + PCIE20_PLR_IATU_LBAR); ++ writel((pp->cfg0_base >> 32), pcie->pci->dbi_base + PCIE20_PLR_IATU_UBAR); ++ writel((pp->cfg0_base + pp->cfg0_size - 1), ++ pcie->pci->dbi_base + PCIE20_PLR_IATU_LAR); ++ writel(busdev, pcie->pci->dbi_base + PCIE20_PLR_IATU_LTAR); ++ writel(0, pcie->pci->dbi_base + PCIE20_PLR_IATU_UTAR); ++} ++ ++static void qcom_pcie_prog_viewport_mem2_outbound(struct qcom_pcie *pcie) ++{ ++ struct pcie_port *pp = &pcie->pci->pp; ++ ++ /* ++ * program and enable address translation region 2 (device resource ++ * address space); region type memory; ++ * axi device bar address range to device bar address range ++ */ ++ writel(PCIE20_PLR_IATU_REGION_OUTBOUND | ++ PCIE20_PLR_IATU_REGION_INDEX(2), ++ pcie->pci->dbi_base + PCIE20_PLR_IATU_VIEWPORT); ++ ++ writel(PCIE20_PLR_IATU_TYPE_MEM, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL1); ++ writel(PCIE20_PLR_IATU_ENABLE, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL2); ++ writel(pp->mem_base, pcie->pci->dbi_base + PCIE20_PLR_IATU_LBAR); ++ writel((pp->mem_base >> 32), pcie->pci->dbi_base + PCIE20_PLR_IATU_UBAR); ++ writel(pp->mem_base + pp->mem_size - 1, ++ pcie->pci->dbi_base + PCIE20_PLR_IATU_LAR); ++ writel(pp->mem_bus_addr, pcie->pci->dbi_base + PCIE20_PLR_IATU_LTAR); ++ writel(upper_32_bits(pp->mem_bus_addr), ++ pcie->pci->dbi_base + PCIE20_PLR_IATU_UTAR); ++ ++ /* 256B PCIE buffer setting */ ++ writel(0x1, pcie->pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL0); ++ writel(0x1, pcie->pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1); ++} ++ + static int qcom_pcie_get_resources_2_1_0(struct qcom_pcie *pcie) + { + struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0; +@@ -465,6 +538,9 @@ + writel(CFG_BRIDGE_SB_INIT, + pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1); + ++ qcom_pcie_prog_viewport_cfg0(pcie, MSM_PCIE_DEV_CFG_ADDR); ++ qcom_pcie_prog_viewport_mem2_outbound(pcie); ++ + return 0; + + err_deassert_ahb: diff --git a/target/linux/ipq806x/patches-4.14/0071-6-PCI-qcom-Force-GEN1-support.patch b/target/linux/ipq806x/patches-4.14/0071-6-PCI-qcom-Force-GEN1-support.patch new file mode 100644 index 0000000000..f623532bdb --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0071-6-PCI-qcom-Force-GEN1-support.patch @@ -0,0 +1,61 @@ +From 4910cfd150342ec7b038892262923c725a9c4001 Mon Sep 17 00:00:00 2001 +From: Sham Muthayyan +Date: Wed, 7 Sep 2016 16:44:28 +0530 +Subject: PCI: qcom: Force GEN1 support + +Change-Id: Ica54ddb737d7b851469deab1745f54bf431bd3f0 +Signed-off-by: Sham Muthayyan +--- + drivers/pci/host/pcie-qcom.c | 13 +++++++++++++ + 1 file changed, 13 insertions(+) + +--- a/drivers/pci/dwc/pcie-qcom.c ++++ b/drivers/pci/dwc/pcie-qcom.c +@@ -129,6 +129,8 @@ + #define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358 + #define SLV_ADDR_SPACE_SZ 0x10000000 + ++#define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xA0 ++ + struct qcom_pcie_resources_2_1_0 { + struct clk *iface_clk; + struct clk *core_clk; +@@ -218,6 +220,7 @@ + struct phy *phy; + struct gpio_desc *reset; + struct qcom_pcie_ops *ops; ++ uint32_t force_gen1; + }; + + #define to_qcom_pcie(x) dev_get_drvdata((x)->dev) +@@ -532,6 +535,11 @@ + + /* wait for clock acquisition */ + usleep_range(1000, 1500); ++ if (pcie->force_gen1) { ++ writel_relaxed((readl_relaxed( ++ pcie->pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2) | 1), ++ pcie->pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2); ++ } + + + /* Set the Max TLP size to 2K, instead of using default of 4K */ +@@ -1382,6 +1390,8 @@ + struct dw_pcie *pci; + struct qcom_pcie *pcie; + int ret; ++ uint32_t force_gen1 = 0; ++ struct device_node *np = pdev->dev.of_node; + + pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL); + if (!pcie) +@@ -1403,6 +1413,9 @@ + if (IS_ERR(pcie->reset)) + return PTR_ERR(pcie->reset); + ++ of_property_read_u32(np, "force_gen1", &force_gen1); ++ pcie->force_gen1 = force_gen1; ++ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf"); + pcie->parf = devm_ioremap_resource(dev, res); + if (IS_ERR(pcie->parf)) diff --git a/target/linux/ipq806x/patches-4.14/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch b/target/linux/ipq806x/patches-4.14/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch new file mode 100644 index 0000000000..c70cd0bf86 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch @@ -0,0 +1,69 @@ +From edff8f777c6321ca89bb950a382f409c4a126e28 Mon Sep 17 00:00:00 2001 +From: Gokul Sriram Palanisamy +Date: Thu, 15 Dec 2016 17:38:18 +0530 +Subject: pcie: Set PCIE MRRS and MPS to 256B + +Set Max Read Request Size and Max Payload Size to 256 bytes, +per chip team recommendation. + +Change-Id: I097004be2ced1b3096ffc10c318aae0b2bb155e8 +Signed-off-by: Gokul Sriram Palanisamy +--- + drivers/pci/host/pcie-qcom.c | 37 +++++++++++++++++++++++++++++++++++++ + 1 file changed, 37 insertions(+) + +(limited to 'drivers/pci/host/pcie-qcom.c') + +--- a/drivers/pci/dwc/pcie-qcom.c ++++ b/drivers/pci/dwc/pcie-qcom.c +@@ -131,6 +131,14 @@ + + #define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xA0 + ++#define __set(v, a, b) (((v) << (b)) & GENMASK(a, b)) ++#define __mask(a, b) (((1 << ((a) + 1)) - 1) & ~((1 << (b)) - 1)) ++#define PCIE20_DEV_CAS 0x78 ++#define PCIE20_MRRS_MASK __mask(14, 12) ++#define PCIE20_MRRS(x) __set(x, 14, 12) ++#define PCIE20_MPS_MASK __mask(7, 5) ++#define PCIE20_MPS(x) __set(x, 7, 5) ++ + struct qcom_pcie_resources_2_1_0 { + struct clk *iface_clk; + struct clk *core_clk; +@@ -1472,6 +1480,35 @@ + return 0; + } + ++static void qcom_pcie_fixup_final(struct pci_dev *dev) ++{ ++ int cap, err; ++ u16 ctl, reg_val; ++ ++ cap = pci_pcie_cap(dev); ++ if (!cap) ++ return; ++ ++ err = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl); ++ ++ if (err) ++ return; ++ ++ reg_val = ctl; ++ ++ if (((reg_val & PCIE20_MRRS_MASK) >> 12) > 1) ++ reg_val = (reg_val & ~(PCIE20_MRRS_MASK)) | PCIE20_MRRS(0x1); ++ ++ if (((ctl & PCIE20_MPS_MASK) >> 5) > 1) ++ reg_val = (reg_val & ~(PCIE20_MPS_MASK)) | PCIE20_MPS(0x1); ++ ++ err = pci_write_config_word(dev, cap + PCI_EXP_DEVCTL, reg_val); ++ ++ if (err) ++ pr_err("pcie config write failed %d\n", err); ++} ++DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, qcom_pcie_fixup_final); ++ + static const struct of_device_id qcom_pcie_match[] = { + { .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 }, + { .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 }, diff --git a/target/linux/ipq806x/patches-4.14/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch b/target/linux/ipq806x/patches-4.14/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch new file mode 100644 index 0000000000..74f666dd5d --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch @@ -0,0 +1,91 @@ +From b74bab6186131eea09459eedf5d737645a3559c9 Mon Sep 17 00:00:00 2001 +From: Abhishek Sahu +Date: Thu, 22 Dec 2016 11:18:45 +0530 +Subject: pcie: qcom: Fixed pcie_phy_clk branch issue + +Following backtraces are observed in PCIe deinit operation. + + Hardware name: Qualcomm (Flattened Device Tree) + (unwind_backtrace) from [] (show_stack+0x10/0x14) + (show_stack) from [] (dump_stack+0x84/0x98) + (dump_stack) from [] (warn_slowpath_common+0x9c/0xb8) + (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) + (warn_slowpath_fmt) from [] (clk_branch_wait+0x114/0x120) + (clk_branch_wait) from [] (clk_core_disable+0xd0/0x1f4) + (clk_core_disable) from [] (clk_disable+0x24/0x30) + (clk_disable) from [] (qcom_pcie_deinit_v0+0x6c/0xb8) + (qcom_pcie_deinit_v0) from [] (qcom_pcie_host_init+0xe0/0xe8) + (qcom_pcie_host_init) from [] (dw_pcie_host_init+0x3b0/0x538) + (dw_pcie_host_init) from [] (qcom_pcie_probe+0x20c/0x2e4) + +pcie_phy_clk is generated for PCIe controller itself and the +GCC controls its branch operation. This error is coming since +the assert operations turn off the parent clock before branch +clock. Now this patch moves clk_disable_unprepare before assert +operations. + +Similarly, during probe function, the clock branch operation +should be done after dessert operation. Currently, it does not +generate any error since bootloader enables the pcie_phy_clk +but the same error is coming during probe, if bootloader +disables pcie_phy_clk. + +Change-Id: Ib29c154d10eb64363d9cc982ce5fd8107af5627d +Signed-off-by: Abhishek Sahu +--- + drivers/pci/host/pcie-qcom.c | 16 +++++++--------- + 1 file changed, 7 insertions(+), 9 deletions(-) + +--- a/drivers/pci/dwc/pcie-qcom.c ++++ b/drivers/pci/dwc/pcie-qcom.c +@@ -407,6 +407,7 @@ + { + struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0; + ++ clk_disable_unprepare(res->phy_clk); + reset_control_assert(res->pci_reset); + reset_control_assert(res->axi_reset); + reset_control_assert(res->ahb_reset); +@@ -415,7 +415,6 @@ + reset_control_assert(res->ext_reset); + clk_disable_unprepare(res->iface_clk); + clk_disable_unprepare(res->core_clk); +- clk_disable_unprepare(res->phy_clk); + clk_disable_unprepare(res->aux_clk); + clk_disable_unprepare(res->ref_clk); + regulator_disable(res->vdda); +@@ -472,12 +472,6 @@ + goto err_clk_core; + } + +- ret = clk_prepare_enable(res->phy_clk); +- if (ret) { +- dev_err(dev, "cannot prepare/enable phy clock\n"); +- goto err_clk_phy; +- } +- + ret = clk_prepare_enable(res->aux_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable aux clock\n"); +@@ -541,6 +535,12 @@ + return ret; + } + ++ ret = clk_prepare_enable(res->phy_clk); ++ if (ret) { ++ dev_err(dev, "cannot prepare/enable phy clock\n"); ++ goto err_deassert_ahb; ++ } ++ + /* wait for clock acquisition */ + usleep_range(1000, 1500); + if (pcie->force_gen1) { +@@ -566,8 +566,6 @@ + err_clk_ref: + clk_disable_unprepare(res->aux_clk); + err_clk_aux: +- clk_disable_unprepare(res->phy_clk); +-err_clk_phy: + clk_disable_unprepare(res->core_clk); + err_clk_core: + clk_disable_unprepare(res->iface_clk); diff --git a/target/linux/ipq806x/patches-4.14/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch b/target/linux/ipq806x/patches-4.14/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch new file mode 100644 index 0000000000..21cee46ff5 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch @@ -0,0 +1,25 @@ +From 1a9c48123bd09f75562b6a2ee0f0a7b2d533cd45 Mon Sep 17 00:00:00 2001 +From: Abhishek Sahu +Date: Thu, 22 Dec 2016 11:50:49 +0530 +Subject: pcie: qcom: change duplicate pci reset to phy reset + +The deinit issues reset_control_assert for pci twice and +does not contain phy reset. + +Change-Id: Iba849963c7e5f9a2a1063f0e2e89635df70b8a99 +Signed-off-by: Abhishek Sahu +--- + drivers/pci/host/pcie-qcom.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/pci/dwc/pcie-qcom.c ++++ b/drivers/pci/dwc/pcie-qcom.c +@@ -408,7 +408,7 @@ + struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0; + + clk_disable_unprepare(res->phy_clk); +- reset_control_assert(res->pci_reset); ++ reset_control_assert(res->phy_reset); + reset_control_assert(res->axi_reset); + reset_control_assert(res->ahb_reset); + reset_control_assert(res->por_reset); diff --git a/target/linux/ipq806x/patches-4.14/0072-add-ipq806x-with-no-clocks.patch b/target/linux/ipq806x/patches-4.14/0072-add-ipq806x-with-no-clocks.patch new file mode 100644 index 0000000000..a29c67872a --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0072-add-ipq806x-with-no-clocks.patch @@ -0,0 +1,12 @@ +--- a/drivers/firmware/qcom_scm.c ++++ b/drivers/firmware/qcom_scm.c +@@ -422,6 +422,9 @@ + { .compatible = "qcom,scm-msm8996", + .data = NULL, /* no clocks */ + }, ++ { .compatible = "qcom,scm-ipq806x", ++ .data = NULL, /* no clocks */ ++ }, + { .compatible = "qcom,scm", + .data = (void *)(SCM_HAS_CORE_CLK + | SCM_HAS_IFACE_CLK diff --git a/target/linux/ipq806x/patches-4.14/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch b/target/linux/ipq806x/patches-4.14/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch new file mode 100644 index 0000000000..89e7490d77 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch @@ -0,0 +1,183 @@ +From 2034addc7e193dc81d7ca60d8884832751b76758 Mon Sep 17 00:00:00 2001 +From: Ajay Kishore +Date: Tue, 24 Jan 2017 14:14:16 +0530 +Subject: pinctrl: qcom: use scm_call to route GPIO irq to Apps + +For IPQ806x targets, TZ protects the registers that are used to +configure the routing of interrupts to a target processor. +To resolve this, this patch uses scm call to route GPIO interrupts +to application processor. Also the scm call interface is changed. + +Change-Id: Ib6c06829d04bc8c20483c36e63da92e26cdef9ce +Signed-off-by: Ajay Kishore +--- + drivers/firmware/qcom_scm-32.c | 17 +++++++++++++++++ + drivers/firmware/qcom_scm-64.c | 9 +++++++++ + drivers/firmware/qcom_scm.c | 13 +++++++++++++ + drivers/firmware/qcom_scm.h | 8 ++++++++ + drivers/pinctrl/qcom/pinctrl-msm.c | 34 ++++++++++++++++++++++++++++------ + include/linux/qcom_scm.h | 3 ++- + 6 files changed, 77 insertions(+), 7 deletions(-) + +--- a/drivers/firmware/qcom_scm-32.c ++++ b/drivers/firmware/qcom_scm-32.c +@@ -561,6 +561,24 @@ + return ret ? : le32_to_cpu(out); + } + ++int __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1) ++{ ++ s32 ret; ++ ++ ret = qcom_scm_call_atomic1(svc_id, cmd_id, arg1); ++ ++ return ret; ++} ++ ++int __qcom_scm_pinmux_write(u32 svc_id, u32 cmd_id, u32 arg1, u32 arg2) ++{ ++ s32 ret; ++ ++ ret = qcom_scm_call_atomic2(svc_id, cmd_id, arg1, arg2); ++ ++ return ret; ++} ++ + int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id) + { + struct { +--- a/drivers/firmware/qcom_scm-64.c ++++ b/drivers/firmware/qcom_scm-64.c +@@ -366,6 +366,16 @@ + return ret ? : res.a1; + } + ++int __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1) ++{ ++ return -ENOTSUPP; ++} ++ ++int __qcom_scm_pinmux_write(u32 svc_id, u32 cmd_id, u32 arg1, u32 arg2) ++{ ++ return -ENOTSUPP; ++} ++ + int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id) + { + struct qcom_scm_desc desc = {0}; +--- a/drivers/firmware/qcom_scm.c ++++ b/drivers/firmware/qcom_scm.c +@@ -470,3 +470,16 @@ static int __init qcom_scm_init(void) + return platform_driver_register(&qcom_scm_driver); + } + subsys_initcall(qcom_scm_init); ++ ++int qcom_scm_pinmux_read(u32 arg1) ++{ ++ return __qcom_scm_pinmux_read(SCM_SVC_IO_ACCESS, SCM_IO_READ, arg1); ++} ++EXPORT_SYMBOL(qcom_scm_pinmux_read); ++ ++int qcom_scm_pinmux_write(u32 arg1, u32 arg2) ++{ ++ return __qcom_scm_pinmux_write(SCM_SVC_IO_ACCESS, SCM_IO_WRITE, ++ arg1, arg2); ++} ++EXPORT_SYMBOL(qcom_scm_pinmux_write); +--- a/drivers/firmware/qcom_scm.h ++++ b/drivers/firmware/qcom_scm.h +@@ -58,6 +58,13 @@ extern int __qcom_scm_pas_auth_and_rese + extern int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral); + extern int __qcom_scm_pas_mss_reset(struct device *dev, bool reset); + ++#define SCM_IO_READ 1 ++#define SCM_IO_WRITE 2 ++#define SCM_SVC_IO_ACCESS 0x5 ++ ++s32 __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1); ++s32 __qcom_scm_pinmux_write(u32 svc_id, u32 cmd_id, u32 arg1, u32 arg2); ++ + /* common error codes */ + #define QCOM_SCM_V2_EBUSY -12 + #define QCOM_SCM_ENOMEM -5 +--- a/drivers/pinctrl/qcom/pinctrl-msm.c ++++ b/drivers/pinctrl/qcom/pinctrl-msm.c +@@ -30,7 +30,8 @@ + #include + #include + #include +- ++#include ++#include + #include "../core.h" + #include "../pinconf.h" + #include "pinctrl-msm.h" +@@ -638,6 +639,9 @@ static int msm_gpio_irq_set_type(struct + const struct msm_pingroup *g; + unsigned long flags; + u32 val; ++ u32 addr; ++ int ret; ++ const __be32 *reg; + + g = &pctrl->soc->groups[d->hwirq]; + +@@ -676,11 +680,30 @@ static int msm_gpio_irq_set_type(struct + else + clear_bit(d->hwirq, pctrl->dual_edge_irqs); + ++ int ret = of_device_is_compatible(pctrl->dev->of_node, ++ "qcom,ipq8064-pinctrl"); + /* Route interrupts to application cpu */ +- val = readl(pctrl->regs + g->intr_target_reg); +- val &= ~(7 << g->intr_target_bit); +- val |= g->intr_target_kpss_val << g->intr_target_bit; +- writel(val, pctrl->regs + g->intr_target_reg); ++ if (!ret) { ++ val = readl(pctrl->regs + g->intr_target_reg); ++ val &= ~(7 << g->intr_target_bit); ++ val |= g->intr_target_kpss_val << g->intr_target_bit; ++ writel(val, pctrl->regs + g->intr_target_reg); ++ } else { ++ const __be32 *reg = of_get_property(pctrl->dev->of_node, "reg", NULL); ++ if (reg) { ++ u32 addr = be32_to_cpup(reg) + g->intr_target_reg; ++ val = qcom_scm_pinmux_read(addr); ++ __iormb(); ++ ++ val &= ~(7 << g->intr_target_bit); ++ val |= g->intr_target_kpss_val << g->intr_target_bit; ++ ++ __iowmb(); ++ ret = qcom_scm_pinmux_write(addr, val); ++ if (ret) ++ pr_err("\n Routing interrupts to Apps proc failed"); ++ } ++ } + + /* Update configuration for gpio. + * RAW_STATUS_EN is left on for all gpio irqs. Due to the +@@ -954,4 +977,3 @@ int msm_pinctrl_remove(struct platform_d + return 0; + } + EXPORT_SYMBOL(msm_pinctrl_remove); +- +--- a/include/linux/qcom_scm.h ++++ b/include/linux/qcom_scm.h +@@ -43,6 +43,8 @@ + extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare); + extern int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size); + extern int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare); ++extern s32 qcom_scm_pinmux_read(u32 arg1); ++extern s32 qcom_scm_pinmux_write(u32 arg1, u32 arg2); + #else + static inline + int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus) +@@ -73,5 +75,7 @@ + static inline int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare) { return -ENODEV; } + static inline int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size) { return -ENODEV; } + static inline int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare) { return -ENODEV; } ++extern s32 qcom_scm_pinmux_read(u32 arg1) { return -ENODEV; } ++extern s32 qcom_scm_pinmux_write(u32 arg1, u32 arg2) { return -ENODEV; } + #endif + #endif diff --git a/target/linux/ipq806x/patches-4.14/0074-ipq806x-usb-Control-USB-master-reset.patch b/target/linux/ipq806x/patches-4.14/0074-ipq806x-usb-Control-USB-master-reset.patch new file mode 100644 index 0000000000..fd208e4ffa --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/0074-ipq806x-usb-Control-USB-master-reset.patch @@ -0,0 +1,71 @@ +From a86bda9f8a7965f0cedd347a9c04800eb9f41ea3 Mon Sep 17 00:00:00 2001 +From: Vasudevan Murugesan +Date: Tue, 21 Jul 2015 10:22:38 +0530 +Subject: ipq806x: usb: Control USB master reset + +During removal of the glue layer(dwc3-of-simple), +USB master reset is set to active and during insertion +it is de-activated. + +Change-Id: I537dc810f6cb2a46664ee674840145066432b957 +Signed-off-by: Vasudevan Murugesan +(cherry picked from commit 4611e13580a216812f85f0801b95442d02eeb836) +--- + drivers/usb/dwc3/dwc3-of-simple.c | 22 ++++++++++++++++++++++ + 1 file changed, 12 insertions(+) + +(limited to 'drivers/usb/dwc3/dwc3-of-simple.c') + +--- a/drivers/usb/dwc3/dwc3-of-simple.c ++++ b/drivers/usb/dwc3/dwc3-of-simple.c +@@ -25,6 +25,7 @@ + #include + #include + #include ++#include + #include + #include + #include +@@ -33,6 +34,8 @@ + struct device *dev; + struct clk **clks; + int num_clocks; ++ struct reset_control *mstr_rst_30_0; ++ struct reset_control *mstr_rst_30_1; + }; + + static int dwc3_of_simple_clk_init(struct dwc3_of_simple *simple, int count) +@@ -102,6 +105,20 @@ + if (ret) + return ret; + ++ simple->mstr_rst_30_0 = devm_reset_control_get(dev, "usb30_0_mstr_rst"); ++ ++ if (!IS_ERR(simple->mstr_rst_30_0)) ++ reset_control_deassert(simple->mstr_rst_30_0); ++ else ++ dev_dbg(simple->dev, "cannot get handle for USB PHY 0 master reset control\n"); ++ ++ simple->mstr_rst_30_1 = devm_reset_control_get(dev, "usb30_1_mstr_rst"); ++ ++ if (!IS_ERR(simple->mstr_rst_30_1)) ++ reset_control_deassert(simple->mstr_rst_30_1); ++ else ++ dev_dbg(simple->dev, "cannot get handle for USB PHY 1 master reset control\n"); ++ + ret = of_platform_populate(np, NULL, NULL, dev); + if (ret) { + for (i = 0; i < simple->num_clocks; i++) { +@@ -130,6 +147,12 @@ + clk_put(simple->clks[i]); + } + ++ if (!IS_ERR(simple->mstr_rst_30_0)) ++ reset_control_assert(simple->mstr_rst_30_0); ++ ++ if (!IS_ERR(simple->mstr_rst_30_1)) ++ reset_control_assert(simple->mstr_rst_30_1); ++ + of_platform_depopulate(dev); + + pm_runtime_put_sync(dev); diff --git a/target/linux/ipq806x/patches-4.14/104-mtd-nand-add-Winbond-manufacturer-and-chip.patch b/target/linux/ipq806x/patches-4.14/104-mtd-nand-add-Winbond-manufacturer-and-chip.patch new file mode 100644 index 0000000000..b87814715c --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/104-mtd-nand-add-Winbond-manufacturer-and-chip.patch @@ -0,0 +1,38 @@ +From 07b6d0cdbbda8c917480eceaec668f09e4cf24a5 Mon Sep 17 00:00:00 2001 +From: Christian Lamparter +Date: Mon, 14 Nov 2016 23:49:22 +0100 +Subject: [PATCH] mtd: nand: add Winbond manufacturer and chip + +This patch adds the W25N01GV NAND to the table of +known devices. Without this patch the device gets detected: + +nand: device found, Manufacturer ID: 0xef, Chip ID: 0xaa +nand: Unknown NAND 256MiB 1,8V 8-bit +nand: 256 MiB, SLC, erase size: 64 KiB, page size: 1024, OOB size : 16 + +Whereas the u-boot identifies it as: +spi_nand: spi_nand_flash_probe SF NAND ID 00:ef:aa:21 +SF: Detected W25N01GV with page size 2 KiB, total 128 MiB + +Due to the page size discrepancy, it's impossible to attach +ubi volumes on the device. + +Signed-off-by: Christian Lamparter +--- + drivers/mtd/nand/nand_ids.c | 4 ++++ + include/linux/mtd/nand.h | 1 + + 2 files changed, 5 insertions(+) + +--- a/drivers/mtd/nand/nand_ids.c ++++ b/drivers/mtd/nand/nand_ids.c +@@ -54,6 +54,10 @@ struct nand_flash_dev nand_flash_ids[] = + { .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} }, + SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640, + NAND_ECC_INFO(40, SZ_1K), 4 }, ++ {"W25N01GV 1G 3.3V 8-bit", ++ { .id = {0xef, 0xaa} }, ++ SZ_2K, SZ_128, SZ_128K, NAND_NO_SUBPAGE_WRITE, ++ 2, 64, NAND_ECC_INFO(1, SZ_512) }, + + LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS), + LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS), diff --git a/target/linux/ipq806x/patches-4.14/105-mtd-nor-add-mx25l25635f.patch b/target/linux/ipq806x/patches-4.14/105-mtd-nor-add-mx25l25635f.patch new file mode 100644 index 0000000000..dc9b02f3a6 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/105-mtd-nor-add-mx25l25635f.patch @@ -0,0 +1,22 @@ +Subject: mtd: spi-nor: add mx25l25635f with SECT_4K + +This patch fixes an issue with the creation of the +ubi volume on the AVM FRITZ!Box 4040. The mx25l25635f +and mx25l25635e support SECT_4K which will set the +erase size to 4K. This is used by ubi to calculate +VID header offsets. Without this, uboot and linux +disagrees about the layout and refuse to attach +the ubi volume created by the other. + +--- +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -1023,7 +1023,7 @@ + { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) }, + { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) }, + { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) }, +- { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, ++ { "mx25l25635f", INFO(0xc22019, 0, 64 * 1024, 512, SECT_4K) }, + { "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) }, + { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) }, + { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, diff --git a/target/linux/ipq806x/patches-4.14/310-msm-adhoc-bus-support.patch b/target/linux/ipq806x/patches-4.14/310-msm-adhoc-bus-support.patch new file mode 100644 index 0000000000..56f114874c --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/310-msm-adhoc-bus-support.patch @@ -0,0 +1,11026 @@ +From: Christian Lamparter +Subject: BUS: add MSM_BUS +--- a/drivers/bus/Makefile ++++ b/drivers/bus/Makefile +@@ -11,6 +11,7 @@ obj-$(CONFIG_BRCMSTB_GISB_ARB) += brcmst + obj-$(CONFIG_IMX_WEIM) += imx-weim.o + obj-$(CONFIG_MIPS_CDMM) += mips_cdmm.o + obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o ++obj-$(CONFIG_BUS_TOPOLOGY_ADHOC)+= msm_bus/ + + # Interconnect bus driver for OMAP SoCs. + obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o +--- a/drivers/bus/Kconfig ++++ b/drivers/bus/Kconfig +@@ -93,6 +93,8 @@ config MVEBU_MBUS + Driver needed for the MBus configuration on Marvell EBU SoCs + (Kirkwood, Dove, Orion5x, MV78XX0 and Armada 370/XP). + ++source "drivers/bus/msm_bus/Kconfig" ++ + config OMAP_INTERCONNECT + tristate "OMAP INTERCONNECT DRIVER" + depends on ARCH_OMAP2PLUS +--- /dev/null ++++ b/include/dt-bindings/msm/msm-bus-ids.h +@@ -0,0 +1,869 @@ ++/* Copyright (c) 2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#ifndef __MSM_BUS_IDS_H ++#define __MSM_BUS_IDS_H ++ ++/* Topology related enums */ ++#define MSM_BUS_FAB_DEFAULT 0 ++#define MSM_BUS_FAB_APPSS 0 ++#define MSM_BUS_FAB_SYSTEM 1024 ++#define MSM_BUS_FAB_MMSS 2048 ++#define MSM_BUS_FAB_SYSTEM_FPB 3072 ++#define MSM_BUS_FAB_CPSS_FPB 4096 ++ ++#define MSM_BUS_FAB_BIMC 0 ++#define MSM_BUS_FAB_SYS_NOC 1024 ++#define MSM_BUS_FAB_MMSS_NOC 2048 ++#define MSM_BUS_FAB_OCMEM_NOC 3072 ++#define MSM_BUS_FAB_PERIPH_NOC 4096 ++#define MSM_BUS_FAB_CONFIG_NOC 5120 ++#define MSM_BUS_FAB_OCMEM_VNOC 6144 ++#define MSM_BUS_FAB_MMSS_AHB 2049 ++#define MSM_BUS_FAB_A0_NOC 6145 ++#define MSM_BUS_FAB_A1_NOC 6146 ++#define MSM_BUS_FAB_A2_NOC 6147 ++ ++#define MSM_BUS_MASTER_FIRST 1 ++#define MSM_BUS_MASTER_AMPSS_M0 1 ++#define MSM_BUS_MASTER_AMPSS_M1 2 ++#define MSM_BUS_APPSS_MASTER_FAB_MMSS 3 ++#define MSM_BUS_APPSS_MASTER_FAB_SYSTEM 4 ++#define MSM_BUS_SYSTEM_MASTER_FAB_APPSS 5 ++#define MSM_BUS_MASTER_SPS 6 ++#define MSM_BUS_MASTER_ADM_PORT0 7 ++#define MSM_BUS_MASTER_ADM_PORT1 8 ++#define MSM_BUS_SYSTEM_MASTER_ADM1_PORT0 9 ++#define MSM_BUS_MASTER_ADM1_PORT1 10 ++#define MSM_BUS_MASTER_LPASS_PROC 11 ++#define MSM_BUS_MASTER_MSS_PROCI 12 ++#define MSM_BUS_MASTER_MSS_PROCD 13 ++#define MSM_BUS_MASTER_MSS_MDM_PORT0 14 ++#define MSM_BUS_MASTER_LPASS 15 ++#define MSM_BUS_SYSTEM_MASTER_CPSS_FPB 16 ++#define MSM_BUS_SYSTEM_MASTER_SYSTEM_FPB 17 ++#define MSM_BUS_SYSTEM_MASTER_MMSS_FPB 18 ++#define MSM_BUS_MASTER_ADM1_CI 19 ++#define MSM_BUS_MASTER_ADM0_CI 20 ++#define MSM_BUS_MASTER_MSS_MDM_PORT1 21 ++#define MSM_BUS_MASTER_MDP_PORT0 22 ++#define MSM_BUS_MASTER_MDP_PORT1 23 ++#define MSM_BUS_MMSS_MASTER_ADM1_PORT0 24 ++#define MSM_BUS_MASTER_ROTATOR 25 ++#define MSM_BUS_MASTER_GRAPHICS_3D 26 ++#define MSM_BUS_MASTER_JPEG_DEC 27 ++#define MSM_BUS_MASTER_GRAPHICS_2D_CORE0 28 ++#define MSM_BUS_MASTER_VFE 29 ++#define MSM_BUS_MASTER_VPE 30 ++#define MSM_BUS_MASTER_JPEG_ENC 31 ++#define MSM_BUS_MASTER_GRAPHICS_2D_CORE1 32 ++#define MSM_BUS_MMSS_MASTER_APPS_FAB 33 ++#define MSM_BUS_MASTER_HD_CODEC_PORT0 34 ++#define MSM_BUS_MASTER_HD_CODEC_PORT1 35 ++#define MSM_BUS_MASTER_SPDM 36 ++#define MSM_BUS_MASTER_RPM 37 ++#define MSM_BUS_MASTER_MSS 38 ++#define MSM_BUS_MASTER_RIVA 39 ++#define MSM_BUS_MASTER_SNOC_VMEM 40 ++#define MSM_BUS_MASTER_MSS_SW_PROC 41 ++#define MSM_BUS_MASTER_MSS_FW_PROC 42 ++#define MSM_BUS_MASTER_HMSS 43 ++#define MSM_BUS_MASTER_GSS_NAV 44 ++#define MSM_BUS_MASTER_PCIE 45 ++#define MSM_BUS_MASTER_SATA 46 ++#define MSM_BUS_MASTER_CRYPTO 47 ++#define MSM_BUS_MASTER_VIDEO_CAP 48 ++#define MSM_BUS_MASTER_GRAPHICS_3D_PORT1 49 ++#define MSM_BUS_MASTER_VIDEO_ENC 50 ++#define MSM_BUS_MASTER_VIDEO_DEC 51 ++#define MSM_BUS_MASTER_LPASS_AHB 52 ++#define MSM_BUS_MASTER_QDSS_BAM 53 ++#define MSM_BUS_MASTER_SNOC_CFG 54 ++#define MSM_BUS_MASTER_CRYPTO_CORE0 55 ++#define MSM_BUS_MASTER_CRYPTO_CORE1 56 ++#define MSM_BUS_MASTER_MSS_NAV 57 ++#define MSM_BUS_MASTER_OCMEM_DMA 58 ++#define MSM_BUS_MASTER_WCSS 59 ++#define MSM_BUS_MASTER_QDSS_ETR 60 ++#define MSM_BUS_MASTER_USB3 61 ++#define MSM_BUS_MASTER_JPEG 62 ++#define MSM_BUS_MASTER_VIDEO_P0 63 ++#define MSM_BUS_MASTER_VIDEO_P1 64 ++#define MSM_BUS_MASTER_MSS_PROC 65 ++#define MSM_BUS_MASTER_JPEG_OCMEM 66 ++#define MSM_BUS_MASTER_MDP_OCMEM 67 ++#define MSM_BUS_MASTER_VIDEO_P0_OCMEM 68 ++#define MSM_BUS_MASTER_VIDEO_P1_OCMEM 69 ++#define MSM_BUS_MASTER_VFE_OCMEM 70 ++#define MSM_BUS_MASTER_CNOC_ONOC_CFG 71 ++#define MSM_BUS_MASTER_RPM_INST 72 ++#define MSM_BUS_MASTER_RPM_DATA 73 ++#define MSM_BUS_MASTER_RPM_SYS 74 ++#define MSM_BUS_MASTER_DEHR 75 ++#define MSM_BUS_MASTER_QDSS_DAP 76 ++#define MSM_BUS_MASTER_TIC 77 ++#define MSM_BUS_MASTER_SDCC_1 78 ++#define MSM_BUS_MASTER_SDCC_3 79 ++#define MSM_BUS_MASTER_SDCC_4 80 ++#define MSM_BUS_MASTER_SDCC_2 81 ++#define MSM_BUS_MASTER_TSIF 82 ++#define MSM_BUS_MASTER_BAM_DMA 83 ++#define MSM_BUS_MASTER_BLSP_2 84 ++#define MSM_BUS_MASTER_USB_HSIC 85 ++#define MSM_BUS_MASTER_BLSP_1 86 ++#define MSM_BUS_MASTER_USB_HS 87 ++#define MSM_BUS_MASTER_PNOC_CFG 88 ++#define MSM_BUS_MASTER_V_OCMEM_GFX3D 89 ++#define MSM_BUS_MASTER_IPA 90 ++#define MSM_BUS_MASTER_QPIC 91 ++#define MSM_BUS_MASTER_MDPE 92 ++#define MSM_BUS_MASTER_USB_HS2 93 ++#define MSM_BUS_MASTER_VPU 94 ++#define MSM_BUS_MASTER_UFS 95 ++#define MSM_BUS_MASTER_BCAST 96 ++#define MSM_BUS_MASTER_CRYPTO_CORE2 97 ++#define MSM_BUS_MASTER_EMAC 98 ++#define MSM_BUS_MASTER_VPU_1 99 ++#define MSM_BUS_MASTER_PCIE_1 100 ++#define MSM_BUS_MASTER_USB3_1 101 ++#define MSM_BUS_MASTER_CNOC_MNOC_MMSS_CFG 102 ++#define MSM_BUS_MASTER_CNOC_MNOC_CFG 103 ++#define MSM_BUS_MASTER_TCU_0 104 ++#define MSM_BUS_MASTER_TCU_1 105 ++#define MSM_BUS_MASTER_CPP 106 ++#define MSM_BUS_MASTER_AUDIO 107 ++#define MSM_BUS_MASTER_PCIE_2 108 ++#define MSM_BUS_MASTER_BLSP_BAM 109 ++#define MSM_BUS_MASTER_USB2_BAM 110 ++#define MSM_BUS_MASTER_ADDS_DMA0 111 ++#define MSM_BUS_MASTER_ADDS_DMA1 112 ++#define MSM_BUS_MASTER_ADDS_DMA2 113 ++#define MSM_BUS_MASTER_ADDS_DMA3 114 ++#define MSM_BUS_MASTER_QPIC_BAM 115 ++#define MSM_BUS_MASTER_SDCC_BAM 116 ++#define MSM_BUS_MASTER_DDRC_SNOC 117 ++#define MSM_BUS_MASTER_WSS_0 118 ++#define MSM_BUS_MASTER_WSS_1 119 ++#define MSM_BUS_MASTER_ESS 120 ++#define MSM_BUS_MASTER_QDSS_BAMNDP 121 ++#define MSM_BUS_MASTER_QDSS_SNOC_CFG 122 ++#define MSM_BUS_MASTER_LAST 130 ++ ++#define MSM_BUS_SYSTEM_FPB_MASTER_SYSTEM MSM_BUS_SYSTEM_MASTER_SYSTEM_FPB ++#define MSM_BUS_CPSS_FPB_MASTER_SYSTEM MSM_BUS_SYSTEM_MASTER_CPSS_FPB ++ ++#define MSM_BUS_SNOC_MM_INT_0 10000 ++#define MSM_BUS_SNOC_MM_INT_1 10001 ++#define MSM_BUS_SNOC_MM_INT_2 10002 ++#define MSM_BUS_SNOC_MM_INT_BIMC 10003 ++#define MSM_BUS_SNOC_INT_0 10004 ++#define MSM_BUS_SNOC_INT_1 10005 ++#define MSM_BUS_SNOC_INT_BIMC 10006 ++#define MSM_BUS_SNOC_BIMC_0_MAS 10007 ++#define MSM_BUS_SNOC_BIMC_1_MAS 10008 ++#define MSM_BUS_SNOC_QDSS_INT 10009 ++#define MSM_BUS_PNOC_SNOC_MAS 10010 ++#define MSM_BUS_PNOC_SNOC_SLV 10011 ++#define MSM_BUS_PNOC_INT_0 10012 ++#define MSM_BUS_PNOC_INT_1 10013 ++#define MSM_BUS_PNOC_M_0 10014 ++#define MSM_BUS_PNOC_M_1 10015 ++#define MSM_BUS_BIMC_SNOC_MAS 10016 ++#define MSM_BUS_BIMC_SNOC_SLV 10017 ++#define MSM_BUS_PNOC_SLV_0 10018 ++#define MSM_BUS_PNOC_SLV_1 10019 ++#define MSM_BUS_PNOC_SLV_2 10020 ++#define MSM_BUS_PNOC_SLV_3 10021 ++#define MSM_BUS_PNOC_SLV_4 10022 ++#define MSM_BUS_PNOC_SLV_8 10023 ++#define MSM_BUS_PNOC_SLV_9 10024 ++#define MSM_BUS_SNOC_BIMC_0_SLV 10025 ++#define MSM_BUS_SNOC_BIMC_1_SLV 10026 ++#define MSM_BUS_MNOC_BIMC_MAS 10027 ++#define MSM_BUS_MNOC_BIMC_SLV 10028 ++#define MSM_BUS_BIMC_MNOC_MAS 10029 ++#define MSM_BUS_BIMC_MNOC_SLV 10030 ++#define MSM_BUS_SNOC_BIMC_MAS 10031 ++#define MSM_BUS_SNOC_BIMC_SLV 10032 ++#define MSM_BUS_CNOC_SNOC_MAS 10033 ++#define MSM_BUS_CNOC_SNOC_SLV 10034 ++#define MSM_BUS_SNOC_CNOC_MAS 10035 ++#define MSM_BUS_SNOC_CNOC_SLV 10036 ++#define MSM_BUS_OVNOC_SNOC_MAS 10037 ++#define MSM_BUS_OVNOC_SNOC_SLV 10038 ++#define MSM_BUS_SNOC_OVNOC_MAS 10039 ++#define MSM_BUS_SNOC_OVNOC_SLV 10040 ++#define MSM_BUS_SNOC_PNOC_MAS 10041 ++#define MSM_BUS_SNOC_PNOC_SLV 10042 ++#define MSM_BUS_BIMC_INT_APPS_EBI 10043 ++#define MSM_BUS_BIMC_INT_APPS_SNOC 10044 ++#define MSM_BUS_SNOC_BIMC_2_MAS 10045 ++#define MSM_BUS_SNOC_BIMC_2_SLV 10046 ++#define MSM_BUS_PNOC_SLV_5 10047 ++#define MSM_BUS_PNOC_SLV_6 10048 ++#define MSM_BUS_PNOC_INT_2 10049 ++#define MSM_BUS_PNOC_INT_3 10050 ++#define MSM_BUS_PNOC_INT_4 10051 ++#define MSM_BUS_PNOC_INT_5 10052 ++#define MSM_BUS_PNOC_INT_6 10053 ++#define MSM_BUS_PNOC_INT_7 10054 ++#define MSM_BUS_BIMC_SNOC_1_MAS 10055 ++#define MSM_BUS_BIMC_SNOC_1_SLV 10056 ++#define MSM_BUS_PNOC_A1NOC_MAS 10057 ++#define MSM_BUS_PNOC_A1NOC_SLV 10058 ++#define MSM_BUS_CNOC_A1NOC_MAS 10059 ++#define MSM_BUS_A0NOC_SNOC_MAS 10060 ++#define MSM_BUS_A0NOC_SNOC_SLV 10061 ++#define MSM_BUS_A1NOC_SNOC_SLV 10062 ++#define MSM_BUS_A1NOC_SNOC_MAS 10063 ++#define MSM_BUS_A2NOC_SNOC_MAS 10064 ++#define MSM_BUS_A2NOC_SNOC_SLV 10065 ++#define MSM_BUS_PNOC_SLV_7 10066 ++#define MSM_BUS_INT_LAST 10067 ++ ++#define MSM_BUS_SLAVE_FIRST 512 ++#define MSM_BUS_SLAVE_EBI_CH0 512 ++#define MSM_BUS_SLAVE_EBI_CH1 513 ++#define MSM_BUS_SLAVE_AMPSS_L2 514 ++#define MSM_BUS_APPSS_SLAVE_FAB_MMSS 515 ++#define MSM_BUS_APPSS_SLAVE_FAB_SYSTEM 516 ++#define MSM_BUS_SYSTEM_SLAVE_FAB_APPS 517 ++#define MSM_BUS_SLAVE_SPS 518 ++#define MSM_BUS_SLAVE_SYSTEM_IMEM 519 ++#define MSM_BUS_SLAVE_AMPSS 520 ++#define MSM_BUS_SLAVE_MSS 521 ++#define MSM_BUS_SLAVE_LPASS 522 ++#define MSM_BUS_SYSTEM_SLAVE_CPSS_FPB 523 ++#define MSM_BUS_SYSTEM_SLAVE_SYSTEM_FPB 524 ++#define MSM_BUS_SYSTEM_SLAVE_MMSS_FPB 525 ++#define MSM_BUS_SLAVE_CORESIGHT 526 ++#define MSM_BUS_SLAVE_RIVA 527 ++#define MSM_BUS_SLAVE_SMI 528 ++#define MSM_BUS_MMSS_SLAVE_FAB_APPS 529 ++#define MSM_BUS_MMSS_SLAVE_FAB_APPS_1 530 ++#define MSM_BUS_SLAVE_MM_IMEM 531 ++#define MSM_BUS_SLAVE_CRYPTO 532 ++#define MSM_BUS_SLAVE_SPDM 533 ++#define MSM_BUS_SLAVE_RPM 534 ++#define MSM_BUS_SLAVE_RPM_MSG_RAM 535 ++#define MSM_BUS_SLAVE_MPM 536 ++#define MSM_BUS_SLAVE_PMIC1_SSBI1_A 537 ++#define MSM_BUS_SLAVE_PMIC1_SSBI1_B 538 ++#define MSM_BUS_SLAVE_PMIC1_SSBI1_C 539 ++#define MSM_BUS_SLAVE_PMIC2_SSBI2_A 540 ++#define MSM_BUS_SLAVE_PMIC2_SSBI2_B 541 ++#define MSM_BUS_SLAVE_GSBI1_UART 542 ++#define MSM_BUS_SLAVE_GSBI2_UART 543 ++#define MSM_BUS_SLAVE_GSBI3_UART 544 ++#define MSM_BUS_SLAVE_GSBI4_UART 545 ++#define MSM_BUS_SLAVE_GSBI5_UART 546 ++#define MSM_BUS_SLAVE_GSBI6_UART 547 ++#define MSM_BUS_SLAVE_GSBI7_UART 548 ++#define MSM_BUS_SLAVE_GSBI8_UART 549 ++#define MSM_BUS_SLAVE_GSBI9_UART 550 ++#define MSM_BUS_SLAVE_GSBI10_UART 551 ++#define MSM_BUS_SLAVE_GSBI11_UART 552 ++#define MSM_BUS_SLAVE_GSBI12_UART 553 ++#define MSM_BUS_SLAVE_GSBI1_QUP 554 ++#define MSM_BUS_SLAVE_GSBI2_QUP 555 ++#define MSM_BUS_SLAVE_GSBI3_QUP 556 ++#define MSM_BUS_SLAVE_GSBI4_QUP 557 ++#define MSM_BUS_SLAVE_GSBI5_QUP 558 ++#define MSM_BUS_SLAVE_GSBI6_QUP 559 ++#define MSM_BUS_SLAVE_GSBI7_QUP 560 ++#define MSM_BUS_SLAVE_GSBI8_QUP 561 ++#define MSM_BUS_SLAVE_GSBI9_QUP 562 ++#define MSM_BUS_SLAVE_GSBI10_QUP 563 ++#define MSM_BUS_SLAVE_GSBI11_QUP 564 ++#define MSM_BUS_SLAVE_GSBI12_QUP 565 ++#define MSM_BUS_SLAVE_EBI2_NAND 566 ++#define MSM_BUS_SLAVE_EBI2_CS0 567 ++#define MSM_BUS_SLAVE_EBI2_CS1 568 ++#define MSM_BUS_SLAVE_EBI2_CS2 569 ++#define MSM_BUS_SLAVE_EBI2_CS3 570 ++#define MSM_BUS_SLAVE_EBI2_CS4 571 ++#define MSM_BUS_SLAVE_EBI2_CS5 572 ++#define MSM_BUS_SLAVE_USB_FS1 573 ++#define MSM_BUS_SLAVE_USB_FS2 574 ++#define MSM_BUS_SLAVE_TSIF 575 ++#define MSM_BUS_SLAVE_MSM_TSSC 576 ++#define MSM_BUS_SLAVE_MSM_PDM 577 ++#define MSM_BUS_SLAVE_MSM_DIMEM 578 ++#define MSM_BUS_SLAVE_MSM_TCSR 579 ++#define MSM_BUS_SLAVE_MSM_PRNG 580 ++#define MSM_BUS_SLAVE_GSS 581 ++#define MSM_BUS_SLAVE_SATA 582 ++#define MSM_BUS_SLAVE_USB3 583 ++#define MSM_BUS_SLAVE_WCSS 584 ++#define MSM_BUS_SLAVE_OCIMEM 585 ++#define MSM_BUS_SLAVE_SNOC_OCMEM 586 ++#define MSM_BUS_SLAVE_SERVICE_SNOC 587 ++#define MSM_BUS_SLAVE_QDSS_STM 588 ++#define MSM_BUS_SLAVE_CAMERA_CFG 589 ++#define MSM_BUS_SLAVE_DISPLAY_CFG 590 ++#define MSM_BUS_SLAVE_OCMEM_CFG 591 ++#define MSM_BUS_SLAVE_CPR_CFG 592 ++#define MSM_BUS_SLAVE_CPR_XPU_CFG 593 ++#define MSM_BUS_SLAVE_MISC_CFG 594 ++#define MSM_BUS_SLAVE_MISC_XPU_CFG 595 ++#define MSM_BUS_SLAVE_VENUS_CFG 596 ++#define MSM_BUS_SLAVE_MISC_VENUS_CFG 597 ++#define MSM_BUS_SLAVE_GRAPHICS_3D_CFG 598 ++#define MSM_BUS_SLAVE_MMSS_CLK_CFG 599 ++#define MSM_BUS_SLAVE_MMSS_CLK_XPU_CFG 600 ++#define MSM_BUS_SLAVE_MNOC_MPU_CFG 601 ++#define MSM_BUS_SLAVE_ONOC_MPU_CFG 602 ++#define MSM_BUS_SLAVE_SERVICE_MNOC 603 ++#define MSM_BUS_SLAVE_OCMEM 604 ++#define MSM_BUS_SLAVE_SERVICE_ONOC 605 ++#define MSM_BUS_SLAVE_SDCC_1 606 ++#define MSM_BUS_SLAVE_SDCC_3 607 ++#define MSM_BUS_SLAVE_SDCC_2 608 ++#define MSM_BUS_SLAVE_SDCC_4 609 ++#define MSM_BUS_SLAVE_BAM_DMA 610 ++#define MSM_BUS_SLAVE_BLSP_2 611 ++#define MSM_BUS_SLAVE_USB_HSIC 612 ++#define MSM_BUS_SLAVE_BLSP_1 613 ++#define MSM_BUS_SLAVE_USB_HS 614 ++#define MSM_BUS_SLAVE_PDM 615 ++#define MSM_BUS_SLAVE_PERIPH_APU_CFG 616 ++#define MSM_BUS_SLAVE_PNOC_MPU_CFG 617 ++#define MSM_BUS_SLAVE_PRNG 618 ++#define MSM_BUS_SLAVE_SERVICE_PNOC 619 ++#define MSM_BUS_SLAVE_CLK_CTL 620 ++#define MSM_BUS_SLAVE_CNOC_MSS 621 ++#define MSM_BUS_SLAVE_SECURITY 622 ++#define MSM_BUS_SLAVE_TCSR 623 ++#define MSM_BUS_SLAVE_TLMM 624 ++#define MSM_BUS_SLAVE_CRYPTO_0_CFG 625 ++#define MSM_BUS_SLAVE_CRYPTO_1_CFG 626 ++#define MSM_BUS_SLAVE_IMEM_CFG 627 ++#define MSM_BUS_SLAVE_MESSAGE_RAM 628 ++#define MSM_BUS_SLAVE_BIMC_CFG 629 ++#define MSM_BUS_SLAVE_BOOT_ROM 630 ++#define MSM_BUS_SLAVE_CNOC_MNOC_MMSS_CFG 631 ++#define MSM_BUS_SLAVE_PMIC_ARB 632 ++#define MSM_BUS_SLAVE_SPDM_WRAPPER 633 ++#define MSM_BUS_SLAVE_DEHR_CFG 634 ++#define MSM_BUS_SLAVE_QDSS_CFG 635 ++#define MSM_BUS_SLAVE_RBCPR_CFG 636 ++#define MSM_BUS_SLAVE_RBCPR_QDSS_APU_CFG 637 ++#define MSM_BUS_SLAVE_SNOC_MPU_CFG 638 ++#define MSM_BUS_SLAVE_CNOC_ONOC_CFG 639 ++#define MSM_BUS_SLAVE_CNOC_MNOC_CFG 640 ++#define MSM_BUS_SLAVE_PNOC_CFG 641 ++#define MSM_BUS_SLAVE_SNOC_CFG 642 ++#define MSM_BUS_SLAVE_EBI1_DLL_CFG 643 ++#define MSM_BUS_SLAVE_PHY_APU_CFG 644 ++#define MSM_BUS_SLAVE_EBI1_PHY_CFG 645 ++#define MSM_BUS_SLAVE_SERVICE_CNOC 646 ++#define MSM_BUS_SLAVE_IPS_CFG 647 ++#define MSM_BUS_SLAVE_QPIC 648 ++#define MSM_BUS_SLAVE_DSI_CFG 649 ++#define MSM_BUS_SLAVE_UFS_CFG 650 ++#define MSM_BUS_SLAVE_RBCPR_CX_CFG 651 ++#define MSM_BUS_SLAVE_RBCPR_MX_CFG 652 ++#define MSM_BUS_SLAVE_PCIE_CFG 653 ++#define MSM_BUS_SLAVE_USB_PHYS_CFG 654 ++#define MSM_BUS_SLAVE_VIDEO_CAP_CFG 655 ++#define MSM_BUS_SLAVE_AVSYNC_CFG 656 ++#define MSM_BUS_SLAVE_CRYPTO_2_CFG 657 ++#define MSM_BUS_SLAVE_VPU_CFG 658 ++#define MSM_BUS_SLAVE_BCAST_CFG 659 ++#define MSM_BUS_SLAVE_KLM_CFG 660 ++#define MSM_BUS_SLAVE_GENI_IR_CFG 661 ++#define MSM_BUS_SLAVE_OCMEM_GFX 662 ++#define MSM_BUS_SLAVE_CATS_128 663 ++#define MSM_BUS_SLAVE_OCMEM_64 664 ++#define MSM_BUS_SLAVE_PCIE_0 665 ++#define MSM_BUS_SLAVE_PCIE_1 666 ++#define MSM_BUS_SLAVE_PCIE_0_CFG 667 ++#define MSM_BUS_SLAVE_PCIE_1_CFG 668 ++#define MSM_BUS_SLAVE_SRVC_MNOC 669 ++#define MSM_BUS_SLAVE_USB_HS2 670 ++#define MSM_BUS_SLAVE_AUDIO 671 ++#define MSM_BUS_SLAVE_TCU 672 ++#define MSM_BUS_SLAVE_APPSS 673 ++#define MSM_BUS_SLAVE_PCIE_PARF 674 ++#define MSM_BUS_SLAVE_USB3_PHY_CFG 675 ++#define MSM_BUS_SLAVE_IPA_CFG 676 ++#define MSM_BUS_SLAVE_A0NOC_SNOC 677 ++#define MSM_BUS_SLAVE_A1NOC_SNOC 678 ++#define MSM_BUS_SLAVE_A2NOC_SNOC 679 ++#define MSM_BUS_SLAVE_HMSS_L3 680 ++#define MSM_BUS_SLAVE_PIMEM_CFG 681 ++#define MSM_BUS_SLAVE_DCC_CFG 682 ++#define MSM_BUS_SLAVE_QDSS_RBCPR_APU_CFG 683 ++#define MSM_BUS_SLAVE_PCIE_2_CFG 684 ++#define MSM_BUS_SLAVE_PCIE20_AHB2PHY 685 ++#define MSM_BUS_SLAVE_A0NOC_CFG 686 ++#define MSM_BUS_SLAVE_A1NOC_CFG 687 ++#define MSM_BUS_SLAVE_A2NOC_CFG 688 ++#define MSM_BUS_SLAVE_A1NOC_MPU_CFG 689 ++#define MSM_BUS_SLAVE_A2NOC_MPU_CFG 690 ++#define MSM_BUS_SLAVE_A0NOC_SMMU_CFG 691 ++#define MSM_BUS_SLAVE_A1NOC_SMMU_CFG 692 ++#define MSM_BUS_SLAVE_A2NOC_SMMU_CFG 693 ++#define MSM_BUS_SLAVE_LPASS_SMMU_CFG 694 ++#define MSM_BUS_SLAVE_MMAGIC_CFG 695 ++#define MSM_BUS_SLAVE_VENUS_THROTTLE_CFG 696 ++#define MSM_BUS_SLAVE_SSC_CFG 697 ++#define MSM_BUS_SLAVE_DSA_CFG 698 ++#define MSM_BUS_SLAVE_DSA_MPU_CFG 699 ++#define MSM_BUS_SLAVE_DISPLAY_THROTTLE_CFG 700 ++#define MSM_BUS_SLAVE_SMMU_CPP_CFG 701 ++#define MSM_BUS_SLAVE_SMMU_JPEG_CFG 702 ++#define MSM_BUS_SLAVE_SMMU_MDP_CFG 703 ++#define MSM_BUS_SLAVE_SMMU_ROTATOR_CFG 704 ++#define MSM_BUS_SLAVE_SMMU_VENUS_CFG 705 ++#define MSM_BUS_SLAVE_SMMU_VFE_CFG 706 ++#define MSM_BUS_SLAVE_A0NOC_MPU_CFG 707 ++#define MSM_BUS_SLAVE_VMEM_CFG 708 ++#define MSM_BUS_SLAVE_CAMERA_THROTTLE_CFG 700 ++#define MSM_BUS_SLAVE_VMEM 709 ++#define MSM_BUS_SLAVE_AHB2PHY 710 ++#define MSM_BUS_SLAVE_PIMEM 711 ++#define MSM_BUS_SLAVE_SNOC_VMEM 712 ++#define MSM_BUS_SLAVE_PCIE_2 713 ++#define MSM_BUS_SLAVE_RBCPR_MX 714 ++#define MSM_BUS_SLAVE_RBCPR_CX 715 ++#define MSM_BUS_SLAVE_PRNG_APU_CFG 716 ++#define MSM_BUS_SLAVE_PERIPH_MPU_CFG 717 ++#define MSM_BUS_SLAVE_GCNT 718 ++#define MSM_BUS_SLAVE_ADSS_CFG 719 ++#define MSM_BUS_SLAVE_ADSS_VMIDMT_CFG 720 ++#define MSM_BUS_SLAVE_QHSS_APU_CFG 721 ++#define MSM_BUS_SLAVE_MDIO 722 ++#define MSM_BUS_SLAVE_FEPHY_CFG 723 ++#define MSM_BUS_SLAVE_SRIF 724 ++#define MSM_BUS_SLAVE_LAST 730 ++#define MSM_BUS_SLAVE_DDRC_CFG 731 ++#define MSM_BUS_SLAVE_DDRC_APU_CFG 732 ++#define MSM_BUS_SLAVE_MPU0_CFG 733 ++#define MSM_BUS_SLAVE_MPU1_CFG 734 ++#define MSM_BUS_SLAVE_MPU2_CFG 734 ++#define MSM_BUS_SLAVE_ESS_VMIDMT_CFG 735 ++#define MSM_BUS_SLAVE_ESS_APU_CFG 736 ++#define MSM_BUS_SLAVE_USB2_CFG 737 ++#define MSM_BUS_SLAVE_BLSP_CFG 738 ++#define MSM_BUS_SLAVE_QPIC_CFG 739 ++#define MSM_BUS_SLAVE_SDCC_CFG 740 ++#define MSM_BUS_SLAVE_WSS0_VMIDMT_CFG 741 ++#define MSM_BUS_SLAVE_WSS0_APU_CFG 742 ++#define MSM_BUS_SLAVE_WSS1_VMIDMT_CFG 743 ++#define MSM_BUS_SLAVE_WSS1_APU_CFG 744 ++#define MSM_BUS_SLAVE_SRVC_PCNOC 745 ++#define MSM_BUS_SLAVE_SNOC_DDRC 746 ++#define MSM_BUS_SLAVE_A7SS 747 ++#define MSM_BUS_SLAVE_WSS0_CFG 748 ++#define MSM_BUS_SLAVE_WSS1_CFG 749 ++#define MSM_BUS_SLAVE_PCIE 750 ++#define MSM_BUS_SLAVE_USB3_CFG 751 ++#define MSM_BUS_SLAVE_CRYPTO_CFG 752 ++#define MSM_BUS_SLAVE_ESS_CFG 753 ++#define MSM_BUS_SLAVE_SRVC_SNOC 754 ++ ++#define MSM_BUS_SYSTEM_FPB_SLAVE_SYSTEM MSM_BUS_SYSTEM_SLAVE_SYSTEM_FPB ++#define MSM_BUS_CPSS_FPB_SLAVE_SYSTEM MSM_BUS_SYSTEM_SLAVE_CPSS_FPB ++ ++/* ++ * ID's used in RPM messages ++ */ ++#define ICBID_MASTER_APPSS_PROC 0 ++#define ICBID_MASTER_MSS_PROC 1 ++#define ICBID_MASTER_MNOC_BIMC 2 ++#define ICBID_MASTER_SNOC_BIMC 3 ++#define ICBID_MASTER_SNOC_BIMC_0 ICBID_MASTER_SNOC_BIMC ++#define ICBID_MASTER_CNOC_MNOC_MMSS_CFG 4 ++#define ICBID_MASTER_CNOC_MNOC_CFG 5 ++#define ICBID_MASTER_GFX3D 6 ++#define ICBID_MASTER_JPEG 7 ++#define ICBID_MASTER_MDP 8 ++#define ICBID_MASTER_MDP0 ICBID_MASTER_MDP ++#define ICBID_MASTER_MDPS ICBID_MASTER_MDP ++#define ICBID_MASTER_VIDEO 9 ++#define ICBID_MASTER_VIDEO_P0 ICBID_MASTER_VIDEO ++#define ICBID_MASTER_VIDEO_P1 10 ++#define ICBID_MASTER_VFE 11 ++#define ICBID_MASTER_CNOC_ONOC_CFG 12 ++#define ICBID_MASTER_JPEG_OCMEM 13 ++#define ICBID_MASTER_MDP_OCMEM 14 ++#define ICBID_MASTER_VIDEO_P0_OCMEM 15 ++#define ICBID_MASTER_VIDEO_P1_OCMEM 16 ++#define ICBID_MASTER_VFE_OCMEM 17 ++#define ICBID_MASTER_LPASS_AHB 18 ++#define ICBID_MASTER_QDSS_BAM 19 ++#define ICBID_MASTER_SNOC_CFG 20 ++#define ICBID_MASTER_BIMC_SNOC 21 ++#define ICBID_MASTER_CNOC_SNOC 22 ++#define ICBID_MASTER_CRYPTO 23 ++#define ICBID_MASTER_CRYPTO_CORE0 ICBID_MASTER_CRYPTO ++#define ICBID_MASTER_CRYPTO_CORE1 24 ++#define ICBID_MASTER_LPASS_PROC 25 ++#define ICBID_MASTER_MSS 26 ++#define ICBID_MASTER_MSS_NAV 27 ++#define ICBID_MASTER_OCMEM_DMA 28 ++#define ICBID_MASTER_PNOC_SNOC 29 ++#define ICBID_MASTER_WCSS 30 ++#define ICBID_MASTER_QDSS_ETR 31 ++#define ICBID_MASTER_USB3 32 ++#define ICBID_MASTER_USB3_0 ICBID_MASTER_USB3 ++#define ICBID_MASTER_SDCC_1 33 ++#define ICBID_MASTER_SDCC_3 34 ++#define ICBID_MASTER_SDCC_2 35 ++#define ICBID_MASTER_SDCC_4 36 ++#define ICBID_MASTER_TSIF 37 ++#define ICBID_MASTER_BAM_DMA 38 ++#define ICBID_MASTER_BLSP_2 39 ++#define ICBID_MASTER_USB_HSIC 40 ++#define ICBID_MASTER_BLSP_1 41 ++#define ICBID_MASTER_USB_HS 42 ++#define ICBID_MASTER_USB_HS1 ICBID_MASTER_USB_HS ++#define ICBID_MASTER_PNOC_CFG 43 ++#define ICBID_MASTER_SNOC_PNOC 44 ++#define ICBID_MASTER_RPM_INST 45 ++#define ICBID_MASTER_RPM_DATA 46 ++#define ICBID_MASTER_RPM_SYS 47 ++#define ICBID_MASTER_DEHR 48 ++#define ICBID_MASTER_QDSS_DAP 49 ++#define ICBID_MASTER_SPDM 50 ++#define ICBID_MASTER_TIC 51 ++#define ICBID_MASTER_SNOC_CNOC 52 ++#define ICBID_MASTER_GFX3D_OCMEM 53 ++#define ICBID_MASTER_GFX3D_GMEM ICBID_MASTER_GFX3D_OCMEM ++#define ICBID_MASTER_OVIRT_SNOC 54 ++#define ICBID_MASTER_SNOC_OVIRT 55 ++#define ICBID_MASTER_SNOC_GVIRT ICBID_MASTER_SNOC_OVIRT ++#define ICBID_MASTER_ONOC_OVIRT 56 ++#define ICBID_MASTER_USB_HS2 57 ++#define ICBID_MASTER_QPIC 58 ++#define ICBID_MASTER_IPA 59 ++#define ICBID_MASTER_DSI 60 ++#define ICBID_MASTER_MDP1 61 ++#define ICBID_MASTER_MDPE ICBID_MASTER_MDP1 ++#define ICBID_MASTER_VPU_PROC 62 ++#define ICBID_MASTER_VPU 63 ++#define ICBID_MASTER_VPU0 ICBID_MASTER_VPU ++#define ICBID_MASTER_CRYPTO_CORE2 64 ++#define ICBID_MASTER_PCIE_0 65 ++#define ICBID_MASTER_PCIE_1 66 ++#define ICBID_MASTER_SATA 67 ++#define ICBID_MASTER_UFS 68 ++#define ICBID_MASTER_USB3_1 69 ++#define ICBID_MASTER_VIDEO_OCMEM 70 ++#define ICBID_MASTER_VPU1 71 ++#define ICBID_MASTER_VCAP 72 ++#define ICBID_MASTER_EMAC 73 ++#define ICBID_MASTER_BCAST 74 ++#define ICBID_MASTER_MMSS_PROC 75 ++#define ICBID_MASTER_SNOC_BIMC_1 76 ++#define ICBID_MASTER_SNOC_PCNOC 77 ++#define ICBID_MASTER_AUDIO 78 ++#define ICBID_MASTER_MM_INT_0 79 ++#define ICBID_MASTER_MM_INT_1 80 ++#define ICBID_MASTER_MM_INT_2 81 ++#define ICBID_MASTER_MM_INT_BIMC 82 ++#define ICBID_MASTER_MSS_INT 83 ++#define ICBID_MASTER_PCNOC_CFG 84 ++#define ICBID_MASTER_PCNOC_INT_0 85 ++#define ICBID_MASTER_PCNOC_INT_1 86 ++#define ICBID_MASTER_PCNOC_M_0 87 ++#define ICBID_MASTER_PCNOC_M_1 88 ++#define ICBID_MASTER_PCNOC_S_0 89 ++#define ICBID_MASTER_PCNOC_S_1 90 ++#define ICBID_MASTER_PCNOC_S_2 91 ++#define ICBID_MASTER_PCNOC_S_3 92 ++#define ICBID_MASTER_PCNOC_S_4 93 ++#define ICBID_MASTER_PCNOC_S_6 94 ++#define ICBID_MASTER_PCNOC_S_7 95 ++#define ICBID_MASTER_PCNOC_S_8 96 ++#define ICBID_MASTER_PCNOC_S_9 97 ++#define ICBID_MASTER_QDSS_INT 98 ++#define ICBID_MASTER_SNOC_INT_0 99 ++#define ICBID_MASTER_SNOC_INT_1 100 ++#define ICBID_MASTER_SNOC_INT_BIMC 101 ++#define ICBID_MASTER_TCU_0 102 ++#define ICBID_MASTER_TCU_1 103 ++#define ICBID_MASTER_BIMC_INT_0 104 ++#define ICBID_MASTER_BIMC_INT_1 105 ++#define ICBID_MASTER_CAMERA 106 ++#define ICBID_MASTER_RICA 107 ++#define ICBID_MASTER_PCNOC_S_5 129 ++#define ICBID_MASTER_PCNOC_INT_2 124 ++#define ICBID_MASTER_PCNOC_INT_3 125 ++#define ICBID_MASTER_PCNOC_INT_4 126 ++#define ICBID_MASTER_PCNOC_INT_5 127 ++#define ICBID_MASTER_PCNOC_INT_6 128 ++#define ICBID_MASTER_PCIE_2 119 ++#define ICBID_MASTER_MASTER_CNOC_A1NOC 116 ++#define ICBID_MASTER_A0NOC_SNOC 110 ++#define ICBID_MASTER_A1NOC_SNOC 111 ++#define ICBID_MASTER_A2NOC_SNOC 112 ++#define ICBID_MASTER_PNOC_A1NOC 117 ++#define ICBID_MASTER_ROTATOR 120 ++#define ICBID_MASTER_SNOC_VMEM 114 ++#define ICBID_MASTER_VENUS_VMEM 121 ++#define ICBID_MASTER_HMSS 118 ++#define ICBID_MASTER_BIMC_SNOC_1 109 ++#define ICBID_MASTER_CNOC_A1NOC 116 ++#define ICBID_MASTER_CPP 115 ++#define ICBID_MASTER_BLSP_BAM 130 ++#define ICBID_MASTER_USB2_BAM 131 ++#define ICBID_MASTER_ADSS_DMA0 132 ++#define ICBID_MASTER_ADSS_DMA1 133 ++#define ICBID_MASTER_ADSS_DMA2 134 ++#define ICBID_MASTER_ADSS_DMA3 135 ++#define ICBID_MASTER_QPIC_BAM 136 ++#define ICBID_MASTER_SDCC_BAM 137 ++#define ICBID_MASTER_DDRC_SNOC 138 ++#define ICBID_MASTER_WSS_0 139 ++#define ICBID_MASTER_WSS_1 140 ++#define ICBID_MASTER_ESS 141 ++#define ICBID_MASTER_PCIE 142 ++#define ICBID_MASTER_QDSS_BAMNDP 143 ++#define ICBID_MASTER_QDSS_SNOC_CFG 144 ++ ++#define ICBID_SLAVE_EBI1 0 ++#define ICBID_SLAVE_APPSS_L2 1 ++#define ICBID_SLAVE_BIMC_SNOC 2 ++#define ICBID_SLAVE_CAMERA_CFG 3 ++#define ICBID_SLAVE_DISPLAY_CFG 4 ++#define ICBID_SLAVE_OCMEM_CFG 5 ++#define ICBID_SLAVE_CPR_CFG 6 ++#define ICBID_SLAVE_CPR_XPU_CFG 7 ++#define ICBID_SLAVE_MISC_CFG 8 ++#define ICBID_SLAVE_MISC_XPU_CFG 9 ++#define ICBID_SLAVE_VENUS_CFG 10 ++#define ICBID_SLAVE_GFX3D_CFG 11 ++#define ICBID_SLAVE_MMSS_CLK_CFG 12 ++#define ICBID_SLAVE_MMSS_CLK_XPU_CFG 13 ++#define ICBID_SLAVE_MNOC_MPU_CFG 14 ++#define ICBID_SLAVE_ONOC_MPU_CFG 15 ++#define ICBID_SLAVE_MNOC_BIMC 16 ++#define ICBID_SLAVE_SERVICE_MNOC 17 ++#define ICBID_SLAVE_OCMEM 18 ++#define ICBID_SLAVE_GMEM ICBID_SLAVE_OCMEM ++#define ICBID_SLAVE_SERVICE_ONOC 19 ++#define ICBID_SLAVE_APPSS 20 ++#define ICBID_SLAVE_LPASS 21 ++#define ICBID_SLAVE_USB3 22 ++#define ICBID_SLAVE_USB3_0 ICBID_SLAVE_USB3 ++#define ICBID_SLAVE_WCSS 23 ++#define ICBID_SLAVE_SNOC_BIMC 24 ++#define ICBID_SLAVE_SNOC_BIMC_0 ICBID_SLAVE_SNOC_BIMC ++#define ICBID_SLAVE_SNOC_CNOC 25 ++#define ICBID_SLAVE_IMEM 26 ++#define ICBID_SLAVE_OCIMEM ICBID_SLAVE_IMEM ++#define ICBID_SLAVE_SNOC_OVIRT 27 ++#define ICBID_SLAVE_SNOC_GVIRT ICBID_SLAVE_SNOC_OVIRT ++#define ICBID_SLAVE_SNOC_PNOC 28 ++#define ICBID_SLAVE_SNOC_PCNOC ICBID_SLAVE_SNOC_PNOC ++#define ICBID_SLAVE_SERVICE_SNOC 29 ++#define ICBID_SLAVE_QDSS_STM 30 ++#define ICBID_SLAVE_SDCC_1 31 ++#define ICBID_SLAVE_SDCC_3 32 ++#define ICBID_SLAVE_SDCC_2 33 ++#define ICBID_SLAVE_SDCC_4 34 ++#define ICBID_SLAVE_TSIF 35 ++#define ICBID_SLAVE_BAM_DMA 36 ++#define ICBID_SLAVE_BLSP_2 37 ++#define ICBID_SLAVE_USB_HSIC 38 ++#define ICBID_SLAVE_BLSP_1 39 ++#define ICBID_SLAVE_USB_HS 40 ++#define ICBID_SLAVE_USB_HS1 ICBID_SLAVE_USB_HS ++#define ICBID_SLAVE_PDM 41 ++#define ICBID_SLAVE_PERIPH_APU_CFG 42 ++#define ICBID_SLAVE_PNOC_MPU_CFG 43 ++#define ICBID_SLAVE_PRNG 44 ++#define ICBID_SLAVE_PNOC_SNOC 45 ++#define ICBID_SLAVE_PCNOC_SNOC ICBID_SLAVE_PNOC_SNOC ++#define ICBID_SLAVE_SERVICE_PNOC 46 ++#define ICBID_SLAVE_CLK_CTL 47 ++#define ICBID_SLAVE_CNOC_MSS 48 ++#define ICBID_SLAVE_PCNOC_MSS ICBID_SLAVE_CNOC_MSS ++#define ICBID_SLAVE_SECURITY 49 ++#define ICBID_SLAVE_TCSR 50 ++#define ICBID_SLAVE_TLMM 51 ++#define ICBID_SLAVE_CRYPTO_0_CFG 52 ++#define ICBID_SLAVE_CRYPTO_1_CFG 53 ++#define ICBID_SLAVE_IMEM_CFG 54 ++#define ICBID_SLAVE_MESSAGE_RAM 55 ++#define ICBID_SLAVE_BIMC_CFG 56 ++#define ICBID_SLAVE_BOOT_ROM 57 ++#define ICBID_SLAVE_CNOC_MNOC_MMSS_CFG 58 ++#define ICBID_SLAVE_PMIC_ARB 59 ++#define ICBID_SLAVE_SPDM_WRAPPER 60 ++#define ICBID_SLAVE_DEHR_CFG 61 ++#define ICBID_SLAVE_MPM 62 ++#define ICBID_SLAVE_QDSS_CFG 63 ++#define ICBID_SLAVE_RBCPR_CFG 64 ++#define ICBID_SLAVE_RBCPR_CX_CFG ICBID_SLAVE_RBCPR_CFG ++#define ICBID_SLAVE_RBCPR_QDSS_APU_CFG 65 ++#define ICBID_SLAVE_CNOC_MNOC_CFG 66 ++#define ICBID_SLAVE_SNOC_MPU_CFG 67 ++#define ICBID_SLAVE_CNOC_ONOC_CFG 68 ++#define ICBID_SLAVE_PNOC_CFG 69 ++#define ICBID_SLAVE_SNOC_CFG 70 ++#define ICBID_SLAVE_EBI1_DLL_CFG 71 ++#define ICBID_SLAVE_PHY_APU_CFG 72 ++#define ICBID_SLAVE_EBI1_PHY_CFG 73 ++#define ICBID_SLAVE_RPM 74 ++#define ICBID_SLAVE_CNOC_SNOC 75 ++#define ICBID_SLAVE_SERVICE_CNOC 76 ++#define ICBID_SLAVE_OVIRT_SNOC 77 ++#define ICBID_SLAVE_OVIRT_OCMEM 78 ++#define ICBID_SLAVE_USB_HS2 79 ++#define ICBID_SLAVE_QPIC 80 ++#define ICBID_SLAVE_IPS_CFG 81 ++#define ICBID_SLAVE_DSI_CFG 82 ++#define ICBID_SLAVE_USB3_1 83 ++#define ICBID_SLAVE_PCIE_0 84 ++#define ICBID_SLAVE_PCIE_1 85 ++#define ICBID_SLAVE_PSS_SMMU_CFG 86 ++#define ICBID_SLAVE_CRYPTO_2_CFG 87 ++#define ICBID_SLAVE_PCIE_0_CFG 88 ++#define ICBID_SLAVE_PCIE_1_CFG 89 ++#define ICBID_SLAVE_SATA_CFG 90 ++#define ICBID_SLAVE_SPSS_GENI_IR 91 ++#define ICBID_SLAVE_UFS_CFG 92 ++#define ICBID_SLAVE_AVSYNC_CFG 93 ++#define ICBID_SLAVE_VPU_CFG 94 ++#define ICBID_SLAVE_USB_PHY_CFG 95 ++#define ICBID_SLAVE_RBCPR_MX_CFG 96 ++#define ICBID_SLAVE_PCIE_PARF 97 ++#define ICBID_SLAVE_VCAP_CFG 98 ++#define ICBID_SLAVE_EMAC_CFG 99 ++#define ICBID_SLAVE_BCAST_CFG 100 ++#define ICBID_SLAVE_KLM_CFG 101 ++#define ICBID_SLAVE_DISPLAY_PWM 102 ++#define ICBID_SLAVE_GENI 103 ++#define ICBID_SLAVE_SNOC_BIMC_1 104 ++#define ICBID_SLAVE_AUDIO 105 ++#define ICBID_SLAVE_CATS_0 106 ++#define ICBID_SLAVE_CATS_1 107 ++#define ICBID_SLAVE_MM_INT_0 108 ++#define ICBID_SLAVE_MM_INT_1 109 ++#define ICBID_SLAVE_MM_INT_2 110 ++#define ICBID_SLAVE_MM_INT_BIMC 111 ++#define ICBID_SLAVE_MMU_MODEM_XPU_CFG 112 ++#define ICBID_SLAVE_MSS_INT 113 ++#define ICBID_SLAVE_PCNOC_INT_0 114 ++#define ICBID_SLAVE_PCNOC_INT_1 115 ++#define ICBID_SLAVE_PCNOC_M_0 116 ++#define ICBID_SLAVE_PCNOC_M_1 117 ++#define ICBID_SLAVE_PCNOC_S_0 118 ++#define ICBID_SLAVE_PCNOC_S_1 119 ++#define ICBID_SLAVE_PCNOC_S_2 120 ++#define ICBID_SLAVE_PCNOC_S_3 121 ++#define ICBID_SLAVE_PCNOC_S_4 122 ++#define ICBID_SLAVE_PCNOC_S_6 123 ++#define ICBID_SLAVE_PCNOC_S_7 124 ++#define ICBID_SLAVE_PCNOC_S_8 125 ++#define ICBID_SLAVE_PCNOC_S_9 126 ++#define ICBID_SLAVE_PRNG_XPU_CFG 127 ++#define ICBID_SLAVE_QDSS_INT 128 ++#define ICBID_SLAVE_RPM_XPU_CFG 129 ++#define ICBID_SLAVE_SNOC_INT_0 130 ++#define ICBID_SLAVE_SNOC_INT_1 131 ++#define ICBID_SLAVE_SNOC_INT_BIMC 132 ++#define ICBID_SLAVE_TCU 133 ++#define ICBID_SLAVE_BIMC_INT_0 134 ++#define ICBID_SLAVE_BIMC_INT_1 135 ++#define ICBID_SLAVE_RICA_CFG 136 ++#define ICBID_SLAVE_PCNOC_S_5 189 ++#define ICBID_SLAVE_PCNOC_S_7 124 ++#define ICBID_SLAVE_PCNOC_INT_2 184 ++#define ICBID_SLAVE_PCNOC_INT_3 185 ++#define ICBID_SLAVE_PCNOC_INT_4 186 ++#define ICBID_SLAVE_PCNOC_INT_5 187 ++#define ICBID_SLAVE_PCNOC_INT_6 188 ++#define ICBID_SLAVE_USB3_PHY_CFG 182 ++#define ICBID_SLAVE_IPA_CFG 183 ++ ++#define ICBID_SLAVE_A0NOC_SNOC 141 ++#define ICBID_SLAVE_A1NOC_SNOC 142 ++#define ICBID_SLAVE_A2NOC_SNOC 143 ++#define ICBID_SLAVE_BIMC_SNOC_1 138 ++#define ICBID_SLAVE_PIMEM 167 ++#define ICBID_SLAVE_PIMEM_CFG 168 ++#define ICBID_SLAVE_DCC_CFG 155 ++#define ICBID_SLAVE_QDSS_RBCPR_APU_CFG 168 ++#define ICBID_SLAVE_A0NOC_CFG 144 ++#define ICBID_SLAVE_PCIE_2_CFG 165 ++#define ICBID_SLAVE_PCIE20_AHB2PHY 163 ++#define ICBID_SLAVE_PCIE_2 164 ++#define ICBID_SLAVE_A1NOC_CFG 147 ++#define ICBID_SLAVE_A1NOC_MPU_CFG 148 ++#define ICBID_SLAVE_A1NOC_SMMU_CFG 149 ++#define ICBID_SLAVE_A2NOC_CFG 150 ++#define ICBID_SLAVE_A2NOC_MPU_CFG 151 ++#define ICBID_SLAVE_A2NOC_SMMU_CFG 152 ++#define ICBID_SLAVE_AHB2PHY 153 ++#define ICBID_SLAVE_HMSS_L3 161 ++#define ICBID_SLAVE_LPASS_SMMU_CFG 161 ++#define ICBID_SLAVE_MMAGIC_CFG 162 ++#define ICBID_SLAVE_SSC_CFG 177 ++#define ICBID_SLAVE_VENUS_THROTTLE_CFG 178 ++#define ICBID_SLAVE_DISPLAY_THROTTLE_CFG 156 ++#define ICBID_SLAVE_CAMERA_THROTTLE_CFG 154 ++#define ICBID_SLAVE_DSA_CFG 157 ++#define ICBID_SLAVE_DSA_MPU_CFG 158 ++#define ICBID_SLAVE_SMMU_CPP_CFG 171 ++#define ICBID_SLAVE_SMMU_JPEG_CFG 172 ++#define ICBID_SLAVE_SMMU_MDP_CFG 173 ++#define ICBID_SLAVE_SMMU_ROTATOR_CFG 174 ++#define ICBID_SLAVE_SMMU_VENUS_CFG 175 ++#define ICBID_SLAVE_SMMU_VFE_CFG 176 ++#define ICBID_SLAVE_A0NOC_MPU_CFG 145 ++#define ICBID_SLAVE_A0NOC_SMMU_CFG 146 ++#define ICBID_SLAVE_VMEM_CFG 180 ++#define ICBID_SLAVE_VMEM 179 ++#define ICBID_SLAVE_PNOC_A1NOC 139 ++#define ICBID_SLAVE_SNOC_VMEM 140 ++#define ICBID_SLAVE_RBCPR_MX 170 ++#define ICBID_SLAVE_RBCPR_CX 169 ++#define ICBID_SLAVE_PRNG_APU_CFG 190 ++#define ICBID_SLAVE_PERIPH_MPU_CFG 191 ++#define ICBID_SLAVE_GCNT 192 ++#define ICBID_SLAVE_ADSS_CFG 193 ++#define ICBID_SLAVE_ADSS_APU 194 ++#define ICBID_SLAVE_ADSS_VMIDMT_CFG 195 ++#define ICBID_SLAVE_QHSS_APU_CFG 196 ++#define ICBID_SLAVE_MDIO 197 ++#define ICBID_SLAVE_FEPHY_CFG 198 ++#define ICBID_SLAVE_SRIF 199 ++#define ICBID_SLAVE_DDRC_CFG 200 ++#define ICBID_SLAVE_DDRC_APU_CFG 201 ++#define ICBID_SLAVE_DDRC_MPU0_CFG 202 ++#define ICBID_SLAVE_DDRC_MPU1_CFG 203 ++#define ICBID_SLAVE_DDRC_MPU2_CFG 210 ++#define ICBID_SLAVE_ESS_VMIDMT_CFG 211 ++#define ICBID_SLAVE_ESS_APU_CFG 212 ++#define ICBID_SLAVE_USB2_CFG 213 ++#define ICBID_SLAVE_BLSP_CFG 214 ++#define ICBID_SLAVE_QPIC_CFG 215 ++#define ICBID_SLAVE_SDCC_CFG 216 ++#define ICBID_SLAVE_WSS0_VMIDMT_CFG 217 ++#define ICBID_SLAVE_WSS0_APU_CFG 218 ++#define ICBID_SLAVE_WSS1_VMIDMT_CFG 219 ++#define ICBID_SLAVE_WSS1_APU_CFG 220 ++#define ICBID_SLAVE_SRVC_PCNOC 221 ++#define ICBID_SLAVE_SNOC_DDRC 222 ++#define ICBID_SLAVE_A7SS 223 ++#define ICBID_SLAVE_WSS0_CFG 224 ++#define ICBID_SLAVE_WSS1_CFG 225 ++#define ICBID_SLAVE_PCIE 226 ++#define ICBID_SLAVE_USB3_CFG 227 ++#define ICBID_SLAVE_CRYPTO_CFG 228 ++#define ICBID_SLAVE_ESS_CFG 229 ++#define ICBID_SLAVE_SRVC_SNOC 230 ++#endif +--- /dev/null ++++ b/include/dt-bindings/msm/msm-bus-rule-ops.h +@@ -0,0 +1,32 @@ ++/* Copyright (c) 2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#ifndef __MSM_BUS_RULE_OPS_H ++#define __MSM_BUS_RULE_OPS_H ++ ++#define FLD_IB 0 ++#define FLD_AB 1 ++#define FLD_CLK 2 ++ ++#define OP_LE 0 ++#define OP_LT 1 ++#define OP_GE 2 ++#define OP_GT 3 ++#define OP_NOOP 4 ++ ++#define RULE_STATE_NOT_APPLIED 0 ++#define RULE_STATE_APPLIED 1 ++ ++#define THROTTLE_ON 0 ++#define THROTTLE_OFF 1 ++ ++#endif +--- /dev/null ++++ b/drivers/bus/msm_bus/Kconfig +@@ -0,0 +1,19 @@ ++config BUS_TOPOLOGY_ADHOC ++ bool "ad-hoc bus scaling topology" ++ depends on ARCH_QCOM ++ default n ++ help ++ This option enables a driver that can handle adhoc bus topologies. ++ Adhoc bus topology driver allows one to many connections and maintains ++ directionality of connections by explicitly listing device connections ++ thus avoiding illegal routes. ++ ++config MSM_BUS_SCALING ++ bool "Bus scaling driver" ++ depends on BUS_TOPOLOGY_ADHOC ++ default n ++ help ++ This option enables bus scaling on MSM devices. Bus scaling ++ allows devices to request the clocks be set to rates sufficient ++ for the active devices needs without keeping the clocks at max ++ frequency when a slower speed is sufficient. +--- /dev/null ++++ b/drivers/bus/msm_bus/Makefile +@@ -0,0 +1,12 @@ ++# ++# Makefile for msm-bus driver specific files ++# ++obj-y += msm_bus_bimc.o msm_bus_noc.o msm_bus_core.o msm_bus_client_api.o \ ++ msm_bus_id.o ++obj-$(CONFIG_OF) += msm_bus_of.o ++ ++obj-y += msm_bus_fabric_adhoc.o msm_bus_arb_adhoc.o msm_bus_rules.o ++obj-$(CONFIG_OF) += msm_bus_of_adhoc.o ++obj-$(CONFIG_CORESIGHT) += msm_buspm_coresight_adhoc.o ++ ++obj-$(CONFIG_DEBUG_FS) += msm_bus_dbg.o +--- /dev/null ++++ b/drivers/bus/msm_bus/msm-bus-board.h +@@ -0,0 +1,198 @@ ++/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#ifndef __ASM_ARCH_MSM_BUS_BOARD_H ++#define __ASM_ARCH_MSM_BUS_BOARD_H ++ ++#include ++#include ++ ++enum context { ++ DUAL_CTX, ++ ACTIVE_CTX, ++ NUM_CTX ++}; ++ ++struct msm_bus_fabric_registration { ++ unsigned int id; ++ const char *name; ++ struct msm_bus_node_info *info; ++ unsigned int len; ++ int ahb; ++ const char *fabclk[NUM_CTX]; ++ const char *iface_clk; ++ unsigned int offset; ++ unsigned int haltid; ++ unsigned int rpm_enabled; ++ unsigned int nmasters; ++ unsigned int nslaves; ++ unsigned int ntieredslaves; ++ bool il_flag; ++ const struct msm_bus_board_algorithm *board_algo; ++ int hw_sel; ++ void *hw_data; ++ uint32_t qos_freq; ++ uint32_t qos_baseoffset; ++ u64 nr_lim_thresh; ++ uint32_t eff_fact; ++ uint32_t qos_delta; ++ bool virt; ++}; ++ ++struct msm_bus_device_node_registration { ++ struct msm_bus_node_device_type *info; ++ unsigned int num_devices; ++ bool virt; ++}; ++ ++enum msm_bus_bw_tier_type { ++ MSM_BUS_BW_TIER1 = 1, ++ MSM_BUS_BW_TIER2, ++ MSM_BUS_BW_COUNT, ++ MSM_BUS_BW_SIZE = 0x7FFFFFFF, ++}; ++ ++struct msm_bus_halt_vector { ++ uint32_t haltval; ++ uint32_t haltmask; ++}; ++ ++extern struct msm_bus_fabric_registration msm_bus_apps_fabric_pdata; ++extern struct msm_bus_fabric_registration msm_bus_sys_fabric_pdata; ++extern struct msm_bus_fabric_registration msm_bus_mm_fabric_pdata; ++extern struct msm_bus_fabric_registration msm_bus_sys_fpb_pdata; ++extern struct msm_bus_fabric_registration msm_bus_cpss_fpb_pdata; ++extern struct msm_bus_fabric_registration msm_bus_def_fab_pdata; ++ ++extern struct msm_bus_fabric_registration msm_bus_8960_apps_fabric_pdata; ++extern struct msm_bus_fabric_registration msm_bus_8960_sys_fabric_pdata; ++extern struct msm_bus_fabric_registration msm_bus_8960_mm_fabric_pdata; ++extern struct msm_bus_fabric_registration msm_bus_8960_sg_mm_fabric_pdata; ++extern struct msm_bus_fabric_registration msm_bus_8960_sys_fpb_pdata; ++extern struct msm_bus_fabric_registration msm_bus_8960_cpss_fpb_pdata; ++ ++extern struct msm_bus_fabric_registration msm_bus_8064_apps_fabric_pdata; ++extern struct msm_bus_fabric_registration msm_bus_8064_sys_fabric_pdata; ++extern struct msm_bus_fabric_registration msm_bus_8064_mm_fabric_pdata; ++extern struct msm_bus_fabric_registration msm_bus_8064_sys_fpb_pdata; ++extern struct msm_bus_fabric_registration msm_bus_8064_cpss_fpb_pdata; ++ ++extern struct msm_bus_fabric_registration msm_bus_9615_sys_fabric_pdata; ++extern struct msm_bus_fabric_registration msm_bus_9615_def_fab_pdata; ++ ++extern struct msm_bus_fabric_registration msm_bus_8930_apps_fabric_pdata; ++extern struct msm_bus_fabric_registration msm_bus_8930_sys_fabric_pdata; ++extern struct msm_bus_fabric_registration msm_bus_8930_mm_fabric_pdata; ++extern struct msm_bus_fabric_registration msm_bus_8930_sys_fpb_pdata; ++extern struct msm_bus_fabric_registration msm_bus_8930_cpss_fpb_pdata; ++ ++extern struct msm_bus_fabric_registration msm_bus_8974_sys_noc_pdata; ++extern struct msm_bus_fabric_registration msm_bus_8974_mmss_noc_pdata; ++extern struct msm_bus_fabric_registration msm_bus_8974_bimc_pdata; ++extern struct msm_bus_fabric_registration msm_bus_8974_ocmem_noc_pdata; ++extern struct msm_bus_fabric_registration msm_bus_8974_periph_noc_pdata; ++extern struct msm_bus_fabric_registration msm_bus_8974_config_noc_pdata; ++extern struct msm_bus_fabric_registration msm_bus_8974_ocmem_vnoc_pdata; ++ ++extern struct msm_bus_fabric_registration msm_bus_9625_sys_noc_pdata; ++extern struct msm_bus_fabric_registration msm_bus_9625_bimc_pdata; ++extern struct msm_bus_fabric_registration msm_bus_9625_periph_noc_pdata; ++extern struct msm_bus_fabric_registration msm_bus_9625_config_noc_pdata; ++ ++extern int msm_bus_device_match_adhoc(struct device *dev, void *id); ++ ++void msm_bus_rpm_set_mt_mask(void); ++int msm_bus_board_rpm_get_il_ids(uint16_t *id); ++int msm_bus_board_get_iid(int id); ++ ++#define NFAB_MSM8226 6 ++#define NFAB_MSM8610 5 ++ ++/* ++ * These macros specify the convention followed for allocating ++ * ids to fabrics, masters and slaves for 8x60. ++ * ++ * A node can be identified as a master/slave/fabric by using ++ * these ids. ++ */ ++#define FABRIC_ID_KEY 1024 ++#define SLAVE_ID_KEY ((FABRIC_ID_KEY) >> 1) ++#define MAX_FAB_KEY 7168 /* OR(All fabric ids) */ ++#define INT_NODE_START 10000 ++ ++#define GET_FABID(id) ((id) & MAX_FAB_KEY) ++ ++#define NODE_ID(id) ((id) & (FABRIC_ID_KEY - 1)) ++#define IS_SLAVE(id) ((NODE_ID(id)) >= SLAVE_ID_KEY ? 1 : 0) ++#define CHECK_ID(iid, id) (((iid & id) != id) ? -ENXIO : iid) ++ ++/* ++ * The following macros are used to format the data for port halt ++ * and unhalt requests. ++ */ ++#define MSM_BUS_CLK_HALT 0x1 ++#define MSM_BUS_CLK_HALT_MASK 0x1 ++#define MSM_BUS_CLK_HALT_FIELDSIZE 0x1 ++#define MSM_BUS_CLK_UNHALT 0x0 ++ ++#define MSM_BUS_MASTER_SHIFT(master, fieldsize) \ ++ ((master) * (fieldsize)) ++ ++#define MSM_BUS_SET_BITFIELD(word, fieldmask, fieldvalue) \ ++ { \ ++ (word) &= ~(fieldmask); \ ++ (word) |= (fieldvalue); \ ++ } ++ ++ ++#define MSM_BUS_MASTER_HALT(u32haltmask, u32haltval, master) \ ++ MSM_BUS_SET_BITFIELD(u32haltmask, \ ++ MSM_BUS_CLK_HALT_MASK< ++ ++ ++#endif /*__ASM_ARCH_MSM_BUS_BOARD_H */ +--- /dev/null ++++ b/drivers/bus/msm_bus/msm-bus.h +@@ -0,0 +1,139 @@ ++/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#ifndef _ARCH_ARM_MACH_MSM_BUS_H ++#define _ARCH_ARM_MACH_MSM_BUS_H ++ ++#include ++#include ++#include ++ ++/* ++ * Macros for clients to convert their data to ib and ab ++ * Ws : Time window over which to transfer the data in SECONDS ++ * Bs : Size of the data block in bytes ++ * Per : Recurrence period ++ * Tb : Throughput bandwidth to prevent stalling ++ * R : Ratio of actual bandwidth used to Tb ++ * Ib : Instantaneous bandwidth ++ * Ab : Arbitrated bandwidth ++ * ++ * IB_RECURRBLOCK and AB_RECURRBLOCK: ++ * These are used if the requirement is to transfer a ++ * recurring block of data over a known time window. ++ * ++ * IB_THROUGHPUTBW and AB_THROUGHPUTBW: ++ * These are used for CPU style masters. Here the requirement ++ * is to have minimum throughput bandwidth available to avoid ++ * stalling. ++ */ ++#define IB_RECURRBLOCK(Ws, Bs) ((Ws) == 0 ? 0 : ((Bs)/(Ws))) ++#define AB_RECURRBLOCK(Ws, Per) ((Ws) == 0 ? 0 : ((Bs)/(Per))) ++#define IB_THROUGHPUTBW(Tb) (Tb) ++#define AB_THROUGHPUTBW(Tb, R) ((Tb) * (R)) ++ ++struct msm_bus_vectors { ++ int src; /* Master */ ++ int dst; /* Slave */ ++ uint64_t ab; /* Arbitrated bandwidth */ ++ uint64_t ib; /* Instantaneous bandwidth */ ++}; ++ ++struct msm_bus_paths { ++ int num_paths; ++ struct msm_bus_vectors *vectors; ++}; ++ ++struct msm_bus_scale_pdata { ++ struct msm_bus_paths *usecase; ++ int num_usecases; ++ const char *name; ++ /* ++ * If the active_only flag is set to 1, the BW request is applied ++ * only when at least one CPU is active (powered on). If the flag ++ * is set to 0, then the BW request is always applied irrespective ++ * of the CPU state. ++ */ ++ unsigned int active_only; ++}; ++ ++/* Scaling APIs */ ++ ++/* ++ * This function returns a handle to the client. This should be used to ++ * call msm_bus_scale_client_update_request. ++ * The function returns 0 if bus driver is unable to register a client ++ */ ++ ++#if (defined(CONFIG_MSM_BUS_SCALING) || defined(CONFIG_BUS_TOPOLOGY_ADHOC)) ++int __init msm_bus_fabric_init_driver(void); ++uint32_t msm_bus_scale_register_client(struct msm_bus_scale_pdata *pdata); ++int msm_bus_scale_client_update_request(uint32_t cl, unsigned int index); ++void msm_bus_scale_unregister_client(uint32_t cl); ++/* AXI Port configuration APIs */ ++int msm_bus_axi_porthalt(int master_port); ++int msm_bus_axi_portunhalt(int master_port); ++ ++#else ++static inline int __init msm_bus_fabric_init_driver(void) { return 0; } ++ ++static inline uint32_t ++msm_bus_scale_register_client(struct msm_bus_scale_pdata *pdata) ++{ ++ return 1; ++} ++ ++static inline int ++msm_bus_scale_client_update_request(uint32_t cl, unsigned int index) ++{ ++ return 0; ++} ++ ++static inline void ++msm_bus_scale_unregister_client(uint32_t cl) ++{ ++} ++ ++static inline int msm_bus_axi_porthalt(int master_port) ++{ ++ return 0; ++} ++ ++static inline int msm_bus_axi_portunhalt(int master_port) ++{ ++ return 0; ++} ++#endif ++ ++#if defined(CONFIG_OF) && defined(CONFIG_MSM_BUS_SCALING) ++struct msm_bus_scale_pdata *msm_bus_pdata_from_node( ++ struct platform_device *pdev, struct device_node *of_node); ++struct msm_bus_scale_pdata *msm_bus_cl_get_pdata(struct platform_device *pdev); ++void msm_bus_cl_clear_pdata(struct msm_bus_scale_pdata *pdata); ++#else ++static inline struct msm_bus_scale_pdata ++*msm_bus_cl_get_pdata(struct platform_device *pdev) ++{ ++ return NULL; ++} ++ ++static inline struct msm_bus_scale_pdata *msm_bus_pdata_from_node( ++ struct platform_device *pdev, struct device_node *of_node) ++{ ++ return NULL; ++} ++ ++static inline void msm_bus_cl_clear_pdata(struct msm_bus_scale_pdata *pdata) ++{ ++} ++#endif ++#endif /*_ARCH_ARM_MACH_MSM_BUS_H*/ +--- /dev/null ++++ b/drivers/bus/msm_bus/msm_bus_adhoc.h +@@ -0,0 +1,141 @@ ++/* Copyright (c) 2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#ifndef _ARCH_ARM_MACH_MSM_BUS_ADHOC_H ++#define _ARCH_ARM_MACH_MSM_BUS_ADHOC_H ++ ++#include ++#include ++#include "msm-bus-board.h" ++#include "msm-bus.h" ++#include "msm_bus_rules.h" ++#include "msm_bus_core.h" ++ ++struct msm_bus_node_device_type; ++struct link_node { ++ uint64_t lnode_ib[NUM_CTX]; ++ uint64_t lnode_ab[NUM_CTX]; ++ int next; ++ struct device *next_dev; ++ struct list_head link; ++ uint32_t in_use; ++}; ++ ++/* New types introduced for adhoc topology */ ++struct msm_bus_noc_ops { ++ int (*qos_init)(struct msm_bus_node_device_type *dev, ++ void __iomem *qos_base, uint32_t qos_off, ++ uint32_t qos_delta, uint32_t qos_freq); ++ int (*set_bw)(struct msm_bus_node_device_type *dev, ++ void __iomem *qos_base, uint32_t qos_off, ++ uint32_t qos_delta, uint32_t qos_freq); ++ int (*limit_mport)(struct msm_bus_node_device_type *dev, ++ void __iomem *qos_base, uint32_t qos_off, ++ uint32_t qos_delta, uint32_t qos_freq, bool enable_lim, ++ uint64_t lim_bw); ++ bool (*update_bw_reg)(int mode); ++}; ++ ++struct nodebw { ++ uint64_t ab[NUM_CTX]; ++ bool dirty; ++}; ++ ++struct msm_bus_fab_device_type { ++ void __iomem *qos_base; ++ phys_addr_t pqos_base; ++ size_t qos_range; ++ uint32_t base_offset; ++ uint32_t qos_freq; ++ uint32_t qos_off; ++ uint32_t util_fact; ++ uint32_t vrail_comp; ++ struct msm_bus_noc_ops noc_ops; ++ enum msm_bus_hw_sel bus_type; ++ bool bypass_qos_prg; ++}; ++ ++struct qos_params_type { ++ int mode; ++ unsigned int prio_lvl; ++ unsigned int prio_rd; ++ unsigned int prio_wr; ++ unsigned int prio1; ++ unsigned int prio0; ++ unsigned int gp; ++ unsigned int thmp; ++ unsigned int ws; ++ int cur_mode; ++ u64 bw_buffer; ++}; ++ ++struct msm_bus_node_info_type { ++ const char *name; ++ unsigned int id; ++ int mas_rpm_id; ++ int slv_rpm_id; ++ int num_ports; ++ int num_qports; ++ int *qport; ++ struct qos_params_type qos_params; ++ unsigned int num_connections; ++ unsigned int num_blist; ++ bool is_fab_dev; ++ bool virt_dev; ++ bool is_traversed; ++ unsigned int *connections; ++ unsigned int *black_listed_connections; ++ struct device **dev_connections; ++ struct device **black_connections; ++ unsigned int bus_device_id; ++ struct device *bus_device; ++ unsigned int buswidth; ++ struct rule_update_path_info rule; ++ uint64_t lim_bw; ++ uint32_t util_fact; ++ uint32_t vrail_comp; ++}; ++ ++struct msm_bus_node_device_type { ++ struct msm_bus_node_info_type *node_info; ++ struct msm_bus_fab_device_type *fabdev; ++ int num_lnodes; ++ struct link_node *lnode_list; ++ uint64_t cur_clk_hz[NUM_CTX]; ++ struct nodebw node_ab; ++ struct list_head link; ++ unsigned int ap_owned; ++ struct nodeclk clk[NUM_CTX]; ++ struct nodeclk qos_clk; ++}; ++ ++int msm_bus_enable_limiter(struct msm_bus_node_device_type *nodedev, ++ bool throttle_en, uint64_t lim_bw); ++int msm_bus_update_clks(struct msm_bus_node_device_type *nodedev, ++ int ctx, int **dirty_nodes, int *num_dirty); ++int msm_bus_commit_data(int *dirty_nodes, int ctx, int num_dirty); ++int msm_bus_update_bw(struct msm_bus_node_device_type *nodedev, int ctx, ++ int64_t add_bw, int **dirty_nodes, int *num_dirty); ++void *msm_bus_realloc_devmem(struct device *dev, void *p, size_t old_size, ++ size_t new_size, gfp_t flags); ++ ++extern struct msm_bus_device_node_registration ++ *msm_bus_of_to_pdata(struct platform_device *pdev); ++extern void msm_bus_arb_setops_adhoc(struct msm_bus_arb_ops *arb_ops); ++extern int msm_bus_bimc_set_ops(struct msm_bus_node_device_type *bus_dev); ++extern int msm_bus_noc_set_ops(struct msm_bus_node_device_type *bus_dev); ++extern int msm_bus_of_get_static_rules(struct platform_device *pdev, ++ struct bus_rule_type **static_rule); ++extern int msm_rules_update_path(struct list_head *input_list, ++ struct list_head *output_list); ++extern void print_all_rules(void); ++#endif /* _ARCH_ARM_MACH_MSM_BUS_ADHOC_H */ +--- /dev/null ++++ b/drivers/bus/msm_bus/msm_bus_arb_adhoc.c +@@ -0,0 +1,998 @@ ++/* Copyright (c) 2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is Mree software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include "msm-bus.h" ++#include "msm_bus_core.h" ++#include "msm_bus_adhoc.h" ++ ++#define NUM_CL_HANDLES 50 ++#define NUM_LNODES 3 ++ ++struct bus_search_type { ++ struct list_head link; ++ struct list_head node_list; ++}; ++ ++struct handle_type { ++ int num_entries; ++ struct msm_bus_client **cl_list; ++}; ++ ++static struct handle_type handle_list; ++struct list_head input_list; ++struct list_head apply_list; ++ ++DEFINE_MUTEX(msm_bus_adhoc_lock); ++ ++static bool chk_bl_list(struct list_head *black_list, unsigned int id) ++{ ++ struct msm_bus_node_device_type *bus_node = NULL; ++ ++ list_for_each_entry(bus_node, black_list, link) { ++ if (bus_node->node_info->id == id) ++ return true; ++ } ++ return false; ++} ++ ++static void copy_remaining_nodes(struct list_head *edge_list, struct list_head ++ *traverse_list, struct list_head *route_list) ++{ ++ struct bus_search_type *search_node; ++ ++ if (list_empty(edge_list) && list_empty(traverse_list)) ++ return; ++ ++ search_node = kzalloc(sizeof(struct bus_search_type), GFP_KERNEL); ++ INIT_LIST_HEAD(&search_node->node_list); ++ list_splice_init(edge_list, traverse_list); ++ list_splice_init(traverse_list, &search_node->node_list); ++ list_add_tail(&search_node->link, route_list); ++} ++ ++/* ++ * Duplicate instantiaion from msm_bus_arb.c. Todo there needs to be a ++ * "util" file for these common func/macros. ++ * ++ * */ ++uint64_t msm_bus_div64(unsigned int w, uint64_t bw) ++{ ++ uint64_t *b = &bw; ++ ++ if ((bw > 0) && (bw < w)) ++ return 1; ++ ++ switch (w) { ++ case 0: ++ WARN(1, "AXI: Divide by 0 attempted\n"); ++ case 1: return bw; ++ case 2: return (bw >> 1); ++ case 4: return (bw >> 2); ++ case 8: return (bw >> 3); ++ case 16: return (bw >> 4); ++ case 32: return (bw >> 5); ++ } ++ ++ do_div(*b, w); ++ return *b; ++} ++ ++int msm_bus_device_match_adhoc(struct device *dev, void *id) ++{ ++ int ret = 0; ++ struct msm_bus_node_device_type *bnode = dev->platform_data; ++ ++ if (bnode) ++ ret = (bnode->node_info->id == *(unsigned int *)id); ++ else ++ ret = 0; ++ ++ return ret; ++} ++ ++static int gen_lnode(struct device *dev, ++ int next_hop, int prev_idx) ++{ ++ struct link_node *lnode; ++ struct msm_bus_node_device_type *cur_dev = NULL; ++ int lnode_idx = -1; ++ ++ if (!dev) ++ goto exit_gen_lnode; ++ ++ cur_dev = dev->platform_data; ++ if (!cur_dev) { ++ MSM_BUS_ERR("%s: Null device ptr", __func__); ++ goto exit_gen_lnode; ++ } ++ ++ if (!cur_dev->num_lnodes) { ++ cur_dev->lnode_list = devm_kzalloc(dev, ++ sizeof(struct link_node) * NUM_LNODES, ++ GFP_KERNEL); ++ if (!cur_dev->lnode_list) ++ goto exit_gen_lnode; ++ ++ lnode = cur_dev->lnode_list; ++ cur_dev->num_lnodes = NUM_LNODES; ++ lnode_idx = 0; ++ } else { ++ int i; ++ for (i = 0; i < cur_dev->num_lnodes; i++) { ++ if (!cur_dev->lnode_list[i].in_use) ++ break; ++ } ++ ++ if (i < cur_dev->num_lnodes) { ++ lnode = &cur_dev->lnode_list[i]; ++ lnode_idx = i; ++ } else { ++ struct link_node *realloc_list; ++ size_t cur_size = sizeof(struct link_node) * ++ cur_dev->num_lnodes; ++ ++ cur_dev->num_lnodes += NUM_LNODES; ++ realloc_list = msm_bus_realloc_devmem( ++ dev, ++ cur_dev->lnode_list, ++ cur_size, ++ sizeof(struct link_node) * ++ cur_dev->num_lnodes, GFP_KERNEL); ++ ++ if (!realloc_list) ++ goto exit_gen_lnode; ++ ++ cur_dev->lnode_list = realloc_list; ++ lnode = &cur_dev->lnode_list[i]; ++ lnode_idx = i; ++ } ++ } ++ ++ lnode->in_use = 1; ++ if (next_hop == cur_dev->node_info->id) { ++ lnode->next = -1; ++ lnode->next_dev = NULL; ++ } else { ++ lnode->next = prev_idx; ++ lnode->next_dev = bus_find_device(&msm_bus_type, NULL, ++ (void *) &next_hop, ++ msm_bus_device_match_adhoc); ++ } ++ ++ memset(lnode->lnode_ib, 0, sizeof(uint64_t) * NUM_CTX); ++ memset(lnode->lnode_ab, 0, sizeof(uint64_t) * NUM_CTX); ++ ++exit_gen_lnode: ++ return lnode_idx; ++} ++ ++static int remove_lnode(struct msm_bus_node_device_type *cur_dev, ++ int lnode_idx) ++{ ++ int ret = 0; ++ ++ if (!cur_dev) { ++ MSM_BUS_ERR("%s: Null device ptr", __func__); ++ ret = -ENODEV; ++ goto exit_remove_lnode; ++ } ++ ++ if (lnode_idx != -1) { ++ if (!cur_dev->num_lnodes || ++ (lnode_idx > (cur_dev->num_lnodes - 1))) { ++ MSM_BUS_ERR("%s: Invalid Idx %d, num_lnodes %d", ++ __func__, lnode_idx, cur_dev->num_lnodes); ++ ret = -ENODEV; ++ goto exit_remove_lnode; ++ } ++ ++ cur_dev->lnode_list[lnode_idx].next = -1; ++ cur_dev->lnode_list[lnode_idx].next_dev = NULL; ++ cur_dev->lnode_list[lnode_idx].in_use = 0; ++ } ++ ++exit_remove_lnode: ++ return ret; ++} ++ ++static int prune_path(struct list_head *route_list, int dest, int src, ++ struct list_head *black_list, int found) ++{ ++ struct bus_search_type *search_node, *temp_search_node; ++ struct msm_bus_node_device_type *bus_node; ++ struct list_head *bl_list; ++ struct list_head *temp_bl_list; ++ int search_dev_id = dest; ++ struct device *dest_dev = bus_find_device(&msm_bus_type, NULL, ++ (void *) &dest, ++ msm_bus_device_match_adhoc); ++ int lnode_hop = -1; ++ ++ if (!found) ++ goto reset_links; ++ ++ if (!dest_dev) { ++ MSM_BUS_ERR("%s: Can't find dest dev %d", __func__, dest); ++ goto exit_prune_path; ++ } ++ ++ lnode_hop = gen_lnode(dest_dev, search_dev_id, lnode_hop); ++ ++ list_for_each_entry_reverse(search_node, route_list, link) { ++ list_for_each_entry(bus_node, &search_node->node_list, link) { ++ unsigned int i; ++ for (i = 0; i < bus_node->node_info->num_connections; ++ i++) { ++ if (bus_node->node_info->connections[i] == ++ search_dev_id) { ++ dest_dev = bus_find_device( ++ &msm_bus_type, ++ NULL, ++ (void *) ++ &bus_node->node_info-> ++ id, ++ msm_bus_device_match_adhoc); ++ ++ if (!dest_dev) { ++ lnode_hop = -1; ++ goto reset_links; ++ } ++ ++ lnode_hop = gen_lnode(dest_dev, ++ search_dev_id, ++ lnode_hop); ++ search_dev_id = ++ bus_node->node_info->id; ++ break; ++ } ++ } ++ } ++ } ++reset_links: ++ list_for_each_entry_safe(search_node, temp_search_node, route_list, ++ link) { ++ list_for_each_entry(bus_node, &search_node->node_list, ++ link) ++ bus_node->node_info->is_traversed = false; ++ ++ list_del(&search_node->link); ++ kfree(search_node); ++ } ++ ++ list_for_each_safe(bl_list, temp_bl_list, black_list) ++ list_del(bl_list); ++ ++exit_prune_path: ++ return lnode_hop; ++} ++ ++static void setup_bl_list(struct msm_bus_node_device_type *node, ++ struct list_head *black_list) ++{ ++ unsigned int i; ++ ++ for (i = 0; i < node->node_info->num_blist; i++) { ++ struct msm_bus_node_device_type *bdev; ++ bdev = node->node_info->black_connections[i]->platform_data; ++ list_add_tail(&bdev->link, black_list); ++ } ++} ++ ++static int getpath(int src, int dest) ++{ ++ struct list_head traverse_list; ++ struct list_head edge_list; ++ struct list_head route_list; ++ struct list_head black_list; ++ struct device *src_dev = bus_find_device(&msm_bus_type, NULL, ++ (void *) &src, ++ msm_bus_device_match_adhoc); ++ struct msm_bus_node_device_type *src_node; ++ struct bus_search_type *search_node; ++ int found = 0; ++ int depth_index = 0; ++ int first_hop = -1; ++ ++ INIT_LIST_HEAD(&traverse_list); ++ INIT_LIST_HEAD(&edge_list); ++ INIT_LIST_HEAD(&route_list); ++ INIT_LIST_HEAD(&black_list); ++ ++ if (!src_dev) { ++ MSM_BUS_ERR("%s: Cannot locate src dev %d", __func__, src); ++ goto exit_getpath; ++ } ++ ++ src_node = src_dev->platform_data; ++ if (!src_node) { ++ MSM_BUS_ERR("%s:Fatal, Source dev %d not found", __func__, src); ++ goto exit_getpath; ++ } ++ list_add_tail(&src_node->link, &traverse_list); ++ ++ while ((!found && !list_empty(&traverse_list))) { ++ struct msm_bus_node_device_type *bus_node = NULL; ++ /* Locate dest_id in the traverse list */ ++ list_for_each_entry(bus_node, &traverse_list, link) { ++ if (bus_node->node_info->id == dest) { ++ found = 1; ++ break; ++ } ++ } ++ ++ if (!found) { ++ unsigned int i; ++ /* Setup the new edge list */ ++ list_for_each_entry(bus_node, &traverse_list, link) { ++ /* Setup list of black-listed nodes */ ++ setup_bl_list(bus_node, &black_list); ++ ++ for (i = 0; i < bus_node->node_info-> ++ num_connections; i++) { ++ bool skip; ++ struct msm_bus_node_device_type ++ *node_conn; ++ node_conn = bus_node->node_info-> ++ dev_connections[i]-> ++ platform_data; ++ if (node_conn->node_info-> ++ is_traversed) { ++ MSM_BUS_ERR("Circ Path %d\n", ++ node_conn->node_info->id); ++ goto reset_traversed; ++ } ++ skip = chk_bl_list(&black_list, ++ bus_node->node_info-> ++ connections[i]); ++ if (!skip) { ++ list_add_tail(&node_conn->link, ++ &edge_list); ++ node_conn->node_info-> ++ is_traversed = true; ++ } ++ } ++ } ++ ++ /* Keep tabs of the previous search list */ ++ search_node = kzalloc(sizeof(struct bus_search_type), ++ GFP_KERNEL); ++ INIT_LIST_HEAD(&search_node->node_list); ++ list_splice_init(&traverse_list, ++ &search_node->node_list); ++ /* Add the previous search list to a route list */ ++ list_add_tail(&search_node->link, &route_list); ++ /* Advancing the list depth */ ++ depth_index++; ++ list_splice_init(&edge_list, &traverse_list); ++ } ++ } ++reset_traversed: ++ copy_remaining_nodes(&edge_list, &traverse_list, &route_list); ++ first_hop = prune_path(&route_list, dest, src, &black_list, found); ++ ++exit_getpath: ++ return first_hop; ++} ++ ++static uint64_t arbitrate_bus_req(struct msm_bus_node_device_type *bus_dev, ++ int ctx) ++{ ++ int i; ++ uint64_t max_ib = 0; ++ uint64_t sum_ab = 0; ++ uint64_t bw_max_hz; ++ struct msm_bus_node_device_type *fab_dev = NULL; ++ uint32_t util_fact = 0; ++ uint32_t vrail_comp = 0; ++ ++ /* Find max ib */ ++ for (i = 0; i < bus_dev->num_lnodes; i++) { ++ max_ib = max(max_ib, bus_dev->lnode_list[i].lnode_ib[ctx]); ++ sum_ab += bus_dev->lnode_list[i].lnode_ab[ctx]; ++ } ++ /* ++ * Account for Util factor and vrail comp. The new aggregation ++ * formula is: ++ * Freq_hz = max((sum(ab) * util_fact)/num_chan, max(ib)/vrail_comp) ++ * / bus-width ++ * util_fact and vrail comp are obtained from fabric/Node's dts ++ * properties. ++ * They default to 100 if absent. ++ */ ++ fab_dev = bus_dev->node_info->bus_device->platform_data; ++ /* Don't do this for virtual fabrics */ ++ if (fab_dev && fab_dev->fabdev) { ++ util_fact = bus_dev->node_info->util_fact ? ++ bus_dev->node_info->util_fact : ++ fab_dev->fabdev->util_fact; ++ vrail_comp = bus_dev->node_info->vrail_comp ? ++ bus_dev->node_info->vrail_comp : ++ fab_dev->fabdev->vrail_comp; ++ sum_ab *= util_fact; ++ sum_ab = msm_bus_div64(100, sum_ab); ++ max_ib *= 100; ++ max_ib = msm_bus_div64(vrail_comp, max_ib); ++ } ++ ++ /* Account for multiple channels if any */ ++ if (bus_dev->node_info->num_qports > 1) ++ sum_ab = msm_bus_div64(bus_dev->node_info->num_qports, ++ sum_ab); ++ ++ if (!bus_dev->node_info->buswidth) { ++ MSM_BUS_WARN("No bus width found for %d. Using default\n", ++ bus_dev->node_info->id); ++ bus_dev->node_info->buswidth = 8; ++ } ++ ++ bw_max_hz = max(max_ib, sum_ab); ++ bw_max_hz = msm_bus_div64(bus_dev->node_info->buswidth, ++ bw_max_hz); ++ ++ return bw_max_hz; ++} ++ ++static void del_inp_list(struct list_head *list) ++{ ++ struct rule_update_path_info *rule_node; ++ struct rule_update_path_info *rule_node_tmp; ++ ++ list_for_each_entry_safe(rule_node, rule_node_tmp, list, link) ++ list_del(&rule_node->link); ++} ++ ++static void del_op_list(struct list_head *list) ++{ ++ struct rule_apply_rcm_info *rule; ++ struct rule_apply_rcm_info *rule_tmp; ++ ++ list_for_each_entry_safe(rule, rule_tmp, list, link) ++ list_del(&rule->link); ++} ++ ++static int msm_bus_apply_rules(struct list_head *list, bool after_clk_commit) ++{ ++ struct rule_apply_rcm_info *rule; ++ struct device *dev = NULL; ++ struct msm_bus_node_device_type *dev_info = NULL; ++ int ret = 0; ++ bool throttle_en = false; ++ ++ list_for_each_entry(rule, list, link) { ++ if (!rule) ++ break; ++ ++ if (rule && (rule->after_clk_commit != after_clk_commit)) ++ continue; ++ ++ dev = bus_find_device(&msm_bus_type, NULL, ++ (void *) &rule->id, ++ msm_bus_device_match_adhoc); ++ ++ if (!dev) { ++ MSM_BUS_ERR("Can't find dev node for %d", rule->id); ++ continue; ++ } ++ dev_info = dev->platform_data; ++ ++ throttle_en = ((rule->throttle == THROTTLE_ON) ? true : false); ++ ret = msm_bus_enable_limiter(dev_info, throttle_en, ++ rule->lim_bw); ++ if (ret) ++ MSM_BUS_ERR("Failed to set limiter for %d", rule->id); ++ } ++ ++ return ret; ++} ++ ++static uint64_t get_node_aggab(struct msm_bus_node_device_type *bus_dev) ++{ ++ int i; ++ int ctx; ++ uint64_t max_agg_ab = 0; ++ uint64_t agg_ab = 0; ++ ++ for (ctx = 0; ctx < NUM_CTX; ctx++) { ++ for (i = 0; i < bus_dev->num_lnodes; i++) ++ agg_ab += bus_dev->lnode_list[i].lnode_ab[ctx]; ++ ++ if (bus_dev->node_info->num_qports > 1) ++ agg_ab = msm_bus_div64(bus_dev->node_info->num_qports, ++ agg_ab); ++ ++ max_agg_ab = max(max_agg_ab, agg_ab); ++ } ++ ++ return max_agg_ab; ++} ++ ++static uint64_t get_node_ib(struct msm_bus_node_device_type *bus_dev) ++{ ++ int i; ++ int ctx; ++ uint64_t max_ib = 0; ++ ++ for (ctx = 0; ctx < NUM_CTX; ctx++) { ++ for (i = 0; i < bus_dev->num_lnodes; i++) ++ max_ib = max(max_ib, ++ bus_dev->lnode_list[i].lnode_ib[ctx]); ++ } ++ return max_ib; ++} ++ ++static int update_path(int src, int dest, uint64_t req_ib, uint64_t req_bw, ++ uint64_t cur_ib, uint64_t cur_bw, int src_idx, int ctx) ++{ ++ struct device *src_dev = NULL; ++ struct device *next_dev = NULL; ++ struct link_node *lnode = NULL; ++ struct msm_bus_node_device_type *dev_info = NULL; ++ int curr_idx; ++ int ret = 0; ++ int *dirty_nodes = NULL; ++ int num_dirty = 0; ++ struct rule_update_path_info *rule_node; ++ bool rules_registered = msm_rule_are_rules_registered(); ++ ++ src_dev = bus_find_device(&msm_bus_type, NULL, ++ (void *) &src, ++ msm_bus_device_match_adhoc); ++ ++ if (!src_dev) { ++ MSM_BUS_ERR("%s: Can't find source device %d", __func__, src); ++ ret = -ENODEV; ++ goto exit_update_path; ++ } ++ ++ next_dev = src_dev; ++ ++ if (src_idx < 0) { ++ MSM_BUS_ERR("%s: Invalid lnode idx %d", __func__, src_idx); ++ ret = -ENXIO; ++ goto exit_update_path; ++ } ++ curr_idx = src_idx; ++ ++ INIT_LIST_HEAD(&input_list); ++ INIT_LIST_HEAD(&apply_list); ++ ++ while (next_dev) { ++ dev_info = next_dev->platform_data; ++ ++ if (curr_idx >= dev_info->num_lnodes) { ++ MSM_BUS_ERR("%s: Invalid lnode Idx %d num lnodes %d", ++ __func__, curr_idx, dev_info->num_lnodes); ++ ret = -ENXIO; ++ goto exit_update_path; ++ } ++ ++ lnode = &dev_info->lnode_list[curr_idx]; ++ lnode->lnode_ib[ctx] = req_ib; ++ lnode->lnode_ab[ctx] = req_bw; ++ ++ dev_info->cur_clk_hz[ctx] = arbitrate_bus_req(dev_info, ctx); ++ ++ /* Start updating the clocks at the first hop. ++ * Its ok to figure out the aggregated ++ * request at this node. ++ */ ++ if (src_dev != next_dev) { ++ ret = msm_bus_update_clks(dev_info, ctx, &dirty_nodes, ++ &num_dirty); ++ if (ret) { ++ MSM_BUS_ERR("%s: Failed to update clks dev %d", ++ __func__, dev_info->node_info->id); ++ goto exit_update_path; ++ } ++ } ++ ++ ret = msm_bus_update_bw(dev_info, ctx, req_bw, &dirty_nodes, ++ &num_dirty); ++ if (ret) { ++ MSM_BUS_ERR("%s: Failed to update bw dev %d", ++ __func__, dev_info->node_info->id); ++ goto exit_update_path; ++ } ++ ++ if (rules_registered) { ++ rule_node = &dev_info->node_info->rule; ++ rule_node->id = dev_info->node_info->id; ++ rule_node->ib = get_node_ib(dev_info); ++ rule_node->ab = get_node_aggab(dev_info); ++ rule_node->clk = max(dev_info->cur_clk_hz[ACTIVE_CTX], ++ dev_info->cur_clk_hz[DUAL_CTX]); ++ list_add_tail(&rule_node->link, &input_list); ++ } ++ ++ next_dev = lnode->next_dev; ++ curr_idx = lnode->next; ++ } ++ ++ if (rules_registered) { ++ msm_rules_update_path(&input_list, &apply_list); ++ msm_bus_apply_rules(&apply_list, false); ++ } ++ ++ msm_bus_commit_data(dirty_nodes, ctx, num_dirty); ++ ++ if (rules_registered) { ++ msm_bus_apply_rules(&apply_list, true); ++ del_inp_list(&input_list); ++ del_op_list(&apply_list); ++ } ++exit_update_path: ++ return ret; ++} ++ ++static int remove_path(int src, int dst, uint64_t cur_ib, uint64_t cur_ab, ++ int src_idx, int active_only) ++{ ++ struct device *src_dev = NULL; ++ struct device *next_dev = NULL; ++ struct link_node *lnode = NULL; ++ struct msm_bus_node_device_type *dev_info = NULL; ++ int ret = 0; ++ int cur_idx = src_idx; ++ int next_idx; ++ ++ /* Update the current path to zero out all request from ++ * this cient on all paths ++ */ ++ ++ ret = update_path(src, dst, 0, 0, cur_ib, cur_ab, src_idx, ++ active_only); ++ if (ret) { ++ MSM_BUS_ERR("%s: Error zeroing out path ctx %d", ++ __func__, ACTIVE_CTX); ++ goto exit_remove_path; ++ } ++ ++ src_dev = bus_find_device(&msm_bus_type, NULL, ++ (void *) &src, ++ msm_bus_device_match_adhoc); ++ if (!src_dev) { ++ MSM_BUS_ERR("%s: Can't find source device %d", __func__, src); ++ ret = -ENODEV; ++ goto exit_remove_path; ++ } ++ ++ next_dev = src_dev; ++ ++ while (next_dev) { ++ dev_info = next_dev->platform_data; ++ lnode = &dev_info->lnode_list[cur_idx]; ++ next_idx = lnode->next; ++ next_dev = lnode->next_dev; ++ remove_lnode(dev_info, cur_idx); ++ cur_idx = next_idx; ++ } ++ ++exit_remove_path: ++ return ret; ++} ++ ++static void getpath_debug(int src, int curr, int active_only) ++{ ++ struct device *dev_node; ++ struct device *dev_it; ++ unsigned int hop = 1; ++ int idx; ++ struct msm_bus_node_device_type *devinfo; ++ int i; ++ ++ dev_node = bus_find_device(&msm_bus_type, NULL, ++ (void *) &src, ++ msm_bus_device_match_adhoc); ++ ++ if (!dev_node) { ++ MSM_BUS_ERR("SRC NOT FOUND %d", src); ++ return; ++ } ++ ++ idx = curr; ++ devinfo = dev_node->platform_data; ++ dev_it = dev_node; ++ ++ MSM_BUS_ERR("Route list Src %d", src); ++ while (dev_it) { ++ struct msm_bus_node_device_type *busdev = ++ devinfo->node_info->bus_device->platform_data; ++ ++ MSM_BUS_ERR("Hop[%d] at Device %d ctx %d", hop, ++ devinfo->node_info->id, active_only); ++ ++ for (i = 0; i < NUM_CTX; i++) { ++ MSM_BUS_ERR("dev info sel ib %llu", ++ devinfo->cur_clk_hz[i]); ++ MSM_BUS_ERR("dev info sel ab %llu", ++ devinfo->node_ab.ab[i]); ++ } ++ ++ dev_it = devinfo->lnode_list[idx].next_dev; ++ idx = devinfo->lnode_list[idx].next; ++ if (dev_it) ++ devinfo = dev_it->platform_data; ++ ++ MSM_BUS_ERR("Bus Device %d", busdev->node_info->id); ++ MSM_BUS_ERR("Bus Clock %llu", busdev->clk[active_only].rate); ++ ++ if (idx < 0) ++ break; ++ hop++; ++ } ++} ++ ++static void unregister_client_adhoc(uint32_t cl) ++{ ++ int i; ++ struct msm_bus_scale_pdata *pdata; ++ int lnode, src, curr, dest; ++ uint64_t cur_clk, cur_bw; ++ struct msm_bus_client *client; ++ ++ mutex_lock(&msm_bus_adhoc_lock); ++ if (!cl) { ++ MSM_BUS_ERR("%s: Null cl handle passed unregister\n", ++ __func__); ++ goto exit_unregister_client; ++ } ++ client = handle_list.cl_list[cl]; ++ pdata = client->pdata; ++ if (!pdata) { ++ MSM_BUS_ERR("%s: Null pdata passed to unregister\n", ++ __func__); ++ goto exit_unregister_client; ++ } ++ ++ curr = client->curr; ++ if (curr >= pdata->num_usecases) { ++ MSM_BUS_ERR("Invalid index Defaulting curr to 0"); ++ curr = 0; ++ } ++ ++ MSM_BUS_DBG("%s: Unregistering client %p", __func__, client); ++ ++ for (i = 0; i < pdata->usecase->num_paths; i++) { ++ src = client->pdata->usecase[curr].vectors[i].src; ++ dest = client->pdata->usecase[curr].vectors[i].dst; ++ ++ lnode = client->src_pnode[i]; ++ cur_clk = client->pdata->usecase[curr].vectors[i].ib; ++ cur_bw = client->pdata->usecase[curr].vectors[i].ab; ++ remove_path(src, dest, cur_clk, cur_bw, lnode, ++ pdata->active_only); ++ } ++ msm_bus_dbg_client_data(client->pdata, MSM_BUS_DBG_UNREGISTER, cl); ++ kfree(client->src_pnode); ++ kfree(client); ++ handle_list.cl_list[cl] = NULL; ++exit_unregister_client: ++ mutex_unlock(&msm_bus_adhoc_lock); ++ return; ++} ++ ++static int alloc_handle_lst(int size) ++{ ++ int ret = 0; ++ struct msm_bus_client **t_cl_list; ++ ++ if (!handle_list.num_entries) { ++ t_cl_list = kzalloc(sizeof(struct msm_bus_client *) ++ * NUM_CL_HANDLES, GFP_KERNEL); ++ if (ZERO_OR_NULL_PTR(t_cl_list)) { ++ ret = -ENOMEM; ++ MSM_BUS_ERR("%s: Failed to allocate handles list", ++ __func__); ++ goto exit_alloc_handle_lst; ++ } ++ handle_list.cl_list = t_cl_list; ++ handle_list.num_entries += NUM_CL_HANDLES; ++ } else { ++ t_cl_list = krealloc(handle_list.cl_list, ++ sizeof(struct msm_bus_client *) * ++ handle_list.num_entries + NUM_CL_HANDLES, ++ GFP_KERNEL); ++ if (ZERO_OR_NULL_PTR(t_cl_list)) { ++ ret = -ENOMEM; ++ MSM_BUS_ERR("%s: Failed to allocate handles list", ++ __func__); ++ goto exit_alloc_handle_lst; ++ } ++ ++ memset(&handle_list.cl_list[handle_list.num_entries], 0, ++ NUM_CL_HANDLES * sizeof(struct msm_bus_client *)); ++ handle_list.num_entries += NUM_CL_HANDLES; ++ handle_list.cl_list = t_cl_list; ++ } ++exit_alloc_handle_lst: ++ return ret; ++} ++ ++static uint32_t gen_handle(struct msm_bus_client *client) ++{ ++ uint32_t handle = 0; ++ int i; ++ int ret = 0; ++ ++ for (i = 0; i < handle_list.num_entries; i++) { ++ if (i && !handle_list.cl_list[i]) { ++ handle = i; ++ break; ++ } ++ } ++ ++ if (!handle) { ++ ret = alloc_handle_lst(NUM_CL_HANDLES); ++ ++ if (ret) { ++ MSM_BUS_ERR("%s: Failed to allocate handle list", ++ __func__); ++ goto exit_gen_handle; ++ } ++ handle = i + 1; ++ } ++ handle_list.cl_list[handle] = client; ++exit_gen_handle: ++ return handle; ++} ++ ++static uint32_t register_client_adhoc(struct msm_bus_scale_pdata *pdata) ++{ ++ int src, dest; ++ int i; ++ struct msm_bus_client *client = NULL; ++ int *lnode; ++ uint32_t handle = 0; ++ ++ mutex_lock(&msm_bus_adhoc_lock); ++ client = kzalloc(sizeof(struct msm_bus_client), GFP_KERNEL); ++ if (!client) { ++ MSM_BUS_ERR("%s: Error allocating client data", __func__); ++ goto exit_register_client; ++ } ++ client->pdata = pdata; ++ ++ lnode = kzalloc(pdata->usecase->num_paths * sizeof(int), GFP_KERNEL); ++ if (ZERO_OR_NULL_PTR(lnode)) { ++ MSM_BUS_ERR("%s: Error allocating pathnode ptr!", __func__); ++ goto exit_register_client; ++ } ++ client->src_pnode = lnode; ++ ++ for (i = 0; i < pdata->usecase->num_paths; i++) { ++ src = pdata->usecase->vectors[i].src; ++ dest = pdata->usecase->vectors[i].dst; ++ ++ if ((src < 0) || (dest < 0)) { ++ MSM_BUS_ERR("%s:Invalid src/dst.src %d dest %d", ++ __func__, src, dest); ++ goto exit_register_client; ++ } ++ ++ lnode[i] = getpath(src, dest); ++ if (lnode[i] < 0) { ++ MSM_BUS_ERR("%s:Failed to find path.src %d dest %d", ++ __func__, src, dest); ++ goto exit_register_client; ++ } ++ } ++ ++ handle = gen_handle(client); ++ msm_bus_dbg_client_data(client->pdata, MSM_BUS_DBG_REGISTER, ++ handle); ++ MSM_BUS_DBG("%s:Client handle %d %s", __func__, handle, ++ client->pdata->name); ++exit_register_client: ++ mutex_unlock(&msm_bus_adhoc_lock); ++ return handle; ++} ++ ++static int update_request_adhoc(uint32_t cl, unsigned int index) ++{ ++ int i, ret = 0; ++ struct msm_bus_scale_pdata *pdata; ++ int lnode, src, curr, dest; ++ uint64_t req_clk, req_bw, curr_clk, curr_bw; ++ struct msm_bus_client *client; ++ const char *test_cl = "Null"; ++ bool log_transaction = false; ++ ++ mutex_lock(&msm_bus_adhoc_lock); ++ ++ if (!cl) { ++ MSM_BUS_ERR("%s: Invalid client handle %d", __func__, cl); ++ ret = -ENXIO; ++ goto exit_update_request; ++ } ++ ++ client = handle_list.cl_list[cl]; ++ pdata = client->pdata; ++ if (!pdata) { ++ MSM_BUS_ERR("%s: Client data Null.[client didn't register]", ++ __func__); ++ ret = -ENXIO; ++ goto exit_update_request; ++ } ++ ++ if (index >= pdata->num_usecases) { ++ MSM_BUS_ERR("Client %u passed invalid index: %d\n", ++ cl, index); ++ ret = -ENXIO; ++ goto exit_update_request; ++ } ++ ++ if (client->curr == index) { ++ MSM_BUS_DBG("%s: Not updating client request idx %d unchanged", ++ __func__, index); ++ goto exit_update_request; ++ } ++ ++ curr = client->curr; ++ client->curr = index; ++ ++ if (!strcmp(test_cl, pdata->name)) ++ log_transaction = true; ++ ++ MSM_BUS_DBG("%s: cl: %u index: %d curr: %d num_paths: %d\n", __func__, ++ cl, index, client->curr, client->pdata->usecase->num_paths); ++ ++ for (i = 0; i < pdata->usecase->num_paths; i++) { ++ src = client->pdata->usecase[index].vectors[i].src; ++ dest = client->pdata->usecase[index].vectors[i].dst; ++ ++ lnode = client->src_pnode[i]; ++ req_clk = client->pdata->usecase[index].vectors[i].ib; ++ req_bw = client->pdata->usecase[index].vectors[i].ab; ++ if (curr < 0) { ++ curr_clk = 0; ++ curr_bw = 0; ++ } else { ++ curr_clk = client->pdata->usecase[curr].vectors[i].ib; ++ curr_bw = client->pdata->usecase[curr].vectors[i].ab; ++ MSM_BUS_DBG("%s:ab: %llu ib: %llu\n", __func__, ++ curr_bw, curr_clk); ++ } ++ ++ ret = update_path(src, dest, req_clk, req_bw, ++ curr_clk, curr_bw, lnode, pdata->active_only); ++ ++ if (ret) { ++ MSM_BUS_ERR("%s: Update path failed! %d ctx %d\n", ++ __func__, ret, ACTIVE_CTX); ++ goto exit_update_request; ++ } ++ ++ if (log_transaction) ++ getpath_debug(src, lnode, pdata->active_only); ++ } ++ msm_bus_dbg_client_data(client->pdata, index , cl); ++exit_update_request: ++ mutex_unlock(&msm_bus_adhoc_lock); ++ return ret; ++} ++ ++/** ++ * msm_bus_arb_setops_adhoc() : Setup the bus arbitration ops ++ * @ arb_ops: pointer to the arb ops. ++ */ ++void msm_bus_arb_setops_adhoc(struct msm_bus_arb_ops *arb_ops) ++{ ++ arb_ops->register_client = register_client_adhoc; ++ arb_ops->update_request = update_request_adhoc; ++ arb_ops->unregister_client = unregister_client_adhoc; ++} +--- /dev/null ++++ b/drivers/bus/msm_bus/msm_bus_bimc.c +@@ -0,0 +1,2112 @@ ++/* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#define pr_fmt(fmt) "AXI: BIMC: %s(): " fmt, __func__ ++ ++#include ++#include ++#include "msm-bus-board.h" ++#include "msm_bus_core.h" ++#include "msm_bus_bimc.h" ++#include "msm_bus_adhoc.h" ++#include ++ ++enum msm_bus_bimc_slave_block { ++ SLAVE_BLOCK_RESERVED = 0, ++ SLAVE_BLOCK_SLAVE_WAY, ++ SLAVE_BLOCK_XPU, ++ SLAVE_BLOCK_ARBITER, ++ SLAVE_BLOCK_SCMO, ++}; ++ ++enum bke_sw { ++ BKE_OFF = 0, ++ BKE_ON = 1, ++}; ++ ++/* M_Generic */ ++ ++#define M_REG_BASE(b) ((b) + 0x00008000) ++ ++#define M_COMPONENT_INFO_ADDR(b, n) \ ++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000000) ++enum bimc_m_component_info { ++ M_COMPONENT_INFO_RMSK = 0xffffff, ++ M_COMPONENT_INFO_INSTANCE_BMSK = 0xff0000, ++ M_COMPONENT_INFO_INSTANCE_SHFT = 0x10, ++ M_COMPONENT_INFO_SUB_TYPE_BMSK = 0xff00, ++ M_COMPONENT_INFO_SUB_TYPE_SHFT = 0x8, ++ M_COMPONENT_INFO_TYPE_BMSK = 0xff, ++ M_COMPONENT_INFO_TYPE_SHFT = 0x0, ++}; ++ ++#define M_CONFIG_INFO_0_ADDR(b, n) \ ++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000020) ++enum bimc_m_config_info_0 { ++ M_CONFIG_INFO_0_RMSK = 0xff00ffff, ++ M_CONFIG_INFO_0_SYNC_MODE_BMSK = 0xff000000, ++ M_CONFIG_INFO_0_SYNC_MODE_SHFT = 0x18, ++ M_CONFIG_INFO_0_CONNECTION_TYPE_BMSK = 0xff00, ++ M_CONFIG_INFO_0_CONNECTION_TYPE_SHFT = 0x8, ++ M_CONFIG_INFO_0_FUNC_BMSK = 0xff, ++ M_CONFIG_INFO_0_FUNC_SHFT = 0x0, ++}; ++ ++#define M_CONFIG_INFO_1_ADDR(b, n) \ ++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000030) ++enum bimc_m_config_info_1 { ++ M_CONFIG_INFO_1_RMSK = 0xffffffff, ++ M_CONFIG_INFO_1_SWAY_CONNECTIVITY_BMSK = 0xffffffff, ++ M_CONFIG_INFO_1_SWAY_CONNECTIVITY_SHFT = 0x0, ++}; ++ ++#define M_CONFIG_INFO_2_ADDR(b, n) \ ++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000040) ++enum bimc_m_config_info_2 { ++ M_CONFIG_INFO_2_RMSK = 0xffffffff, ++ M_CONFIG_INFO_2_M_DATA_WIDTH_BMSK = 0xffff0000, ++ M_CONFIG_INFO_2_M_DATA_WIDTH_SHFT = 0x10, ++ M_CONFIG_INFO_2_M_TID_WIDTH_BMSK = 0xff00, ++ M_CONFIG_INFO_2_M_TID_WIDTH_SHFT = 0x8, ++ M_CONFIG_INFO_2_M_MID_WIDTH_BMSK = 0xff, ++ M_CONFIG_INFO_2_M_MID_WIDTH_SHFT = 0x0, ++}; ++ ++#define M_CONFIG_INFO_3_ADDR(b, n) \ ++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000050) ++enum bimc_m_config_info_3 { ++ M_CONFIG_INFO_3_RMSK = 0xffffffff, ++ M_CONFIG_INFO_3_RCH_DEPTH_BMSK = 0xff000000, ++ M_CONFIG_INFO_3_RCH_DEPTH_SHFT = 0x18, ++ M_CONFIG_INFO_3_BCH_DEPTH_BMSK = 0xff0000, ++ M_CONFIG_INFO_3_BCH_DEPTH_SHFT = 0x10, ++ M_CONFIG_INFO_3_WCH_DEPTH_BMSK = 0xff00, ++ M_CONFIG_INFO_3_WCH_DEPTH_SHFT = 0x8, ++ M_CONFIG_INFO_3_ACH_DEPTH_BMSK = 0xff, ++ M_CONFIG_INFO_3_ACH_DEPTH_SHFT = 0x0, ++}; ++ ++#define M_CONFIG_INFO_4_ADDR(b, n) \ ++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000060) ++enum bimc_m_config_info_4 { ++ M_CONFIG_INFO_4_RMSK = 0xffff, ++ M_CONFIG_INFO_4_REORDER_BUF_DEPTH_BMSK = 0xff00, ++ M_CONFIG_INFO_4_REORDER_BUF_DEPTH_SHFT = 0x8, ++ M_CONFIG_INFO_4_REORDER_TABLE_DEPTH_BMSK = 0xff, ++ M_CONFIG_INFO_4_REORDER_TABLE_DEPTH_SHFT = 0x0, ++}; ++ ++#define M_CONFIG_INFO_5_ADDR(b, n) \ ++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000070) ++enum bimc_m_config_info_5 { ++ M_CONFIG_INFO_5_RMSK = 0x111, ++ M_CONFIG_INFO_5_MP2ARB_PIPELINE_EN_BMSK = 0x100, ++ M_CONFIG_INFO_5_MP2ARB_PIPELINE_EN_SHFT = 0x8, ++ M_CONFIG_INFO_5_MPBUF_PIPELINE_EN_BMSK = 0x10, ++ M_CONFIG_INFO_5_MPBUF_PIPELINE_EN_SHFT = 0x4, ++ M_CONFIG_INFO_5_M2MP_PIPELINE_EN_BMSK = 0x1, ++ M_CONFIG_INFO_5_M2MP_PIPELINE_EN_SHFT = 0x0, ++}; ++ ++#define M_INT_STATUS_ADDR(b, n) \ ++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000100) ++enum bimc_m_int_status { ++ M_INT_STATUS_RMSK = 0x3, ++}; ++ ++#define M_INT_CLR_ADDR(b, n) \ ++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000108) ++enum bimc_m_int_clr { ++ M_INT_CLR_RMSK = 0x3, ++}; ++ ++#define M_INT_EN_ADDR(b, n) \ ++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x0000010c) ++enum bimc_m_int_en { ++ M_INT_EN_RMSK = 0x3, ++}; ++ ++#define M_CLK_CTRL_ADDR(b, n) \ ++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000200) ++enum bimc_m_clk_ctrl { ++ M_CLK_CTRL_RMSK = 0x3, ++ M_CLK_CTRL_MAS_CLK_GATING_EN_BMSK = 0x2, ++ M_CLK_CTRL_MAS_CLK_GATING_EN_SHFT = 0x1, ++ M_CLK_CTRL_CORE_CLK_GATING_EN_BMSK = 0x1, ++ M_CLK_CTRL_CORE_CLK_GATING_EN_SHFT = 0x0, ++}; ++ ++#define M_MODE_ADDR(b, n) \ ++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000210) ++enum bimc_m_mode { ++ M_MODE_RMSK = 0xf0000011, ++ M_MODE_WR_GATHER_BEATS_BMSK = 0xf0000000, ++ M_MODE_WR_GATHER_BEATS_SHFT = 0x1c, ++ M_MODE_NARROW_WR_BMSK = 0x10, ++ M_MODE_NARROW_WR_SHFT = 0x4, ++ M_MODE_ORDERING_MODEL_BMSK = 0x1, ++ M_MODE_ORDERING_MODEL_SHFT = 0x0, ++}; ++ ++#define M_PRIOLVL_OVERRIDE_ADDR(b, n) \ ++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000230) ++enum bimc_m_priolvl_override { ++ M_PRIOLVL_OVERRIDE_RMSK = 0x301, ++ M_PRIOLVL_OVERRIDE_BMSK = 0x300, ++ M_PRIOLVL_OVERRIDE_SHFT = 0x8, ++ M_PRIOLVL_OVERRIDE_OVERRIDE_PRIOLVL_BMSK = 0x1, ++ M_PRIOLVL_OVERRIDE_OVERRIDE_PRIOLVL_SHFT = 0x0, ++}; ++ ++#define M_RD_CMD_OVERRIDE_ADDR(b, n) \ ++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000240) ++enum bimc_m_read_command_override { ++ M_RD_CMD_OVERRIDE_RMSK = 0x3071f7f, ++ M_RD_CMD_OVERRIDE_AREQPRIO_BMSK = 0x3000000, ++ M_RD_CMD_OVERRIDE_AREQPRIO_SHFT = 0x18, ++ M_RD_CMD_OVERRIDE_AMEMTYPE_BMSK = 0x70000, ++ M_RD_CMD_OVERRIDE_AMEMTYPE_SHFT = 0x10, ++ M_RD_CMD_OVERRIDE_ATRANSIENT_BMSK = 0x1000, ++ M_RD_CMD_OVERRIDE_ATRANSIENT_SHFT = 0xc, ++ M_RD_CMD_OVERRIDE_ASHARED_BMSK = 0x800, ++ M_RD_CMD_OVERRIDE_ASHARED_SHFT = 0xb, ++ M_RD_CMD_OVERRIDE_AREDIRECT_BMSK = 0x400, ++ M_RD_CMD_OVERRIDE_AREDIRECT_SHFT = 0xa, ++ M_RD_CMD_OVERRIDE_AOOO_BMSK = 0x200, ++ M_RD_CMD_OVERRIDE_AOOO_SHFT = 0x9, ++ M_RD_CMD_OVERRIDE_AINNERSHARED_BMSK = 0x100, ++ M_RD_CMD_OVERRIDE_AINNERSHARED_SHFT = 0x8, ++ M_RD_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK = 0x40, ++ M_RD_CMD_OVERRIDE_OVERRIDE_AREQPRIO_SHFT = 0x6, ++ M_RD_CMD_OVERRIDE_OVERRIDE_ATRANSIENT_BMSK = 0x20, ++ M_RD_CMD_OVERRIDE_OVERRIDE_ATRANSIENT_SHFT = 0x5, ++ M_RD_CMD_OVERRIDE_OVERRIDE_AMEMTYPE_BMSK = 0x10, ++ M_RD_CMD_OVERRIDE_OVERRIDE_AMEMTYPE_SHFT = 0x4, ++ M_RD_CMD_OVERRIDE_OVERRIDE_ASHARED_BMSK = 0x8, ++ M_RD_CMD_OVERRIDE_OVERRIDE_ASHARED_SHFT = 0x3, ++ M_RD_CMD_OVERRIDE_OVERRIDE_AREDIRECT_BMSK = 0x4, ++ M_RD_CMD_OVERRIDE_OVERRIDE_AREDIRECT_SHFT = 0x2, ++ M_RD_CMD_OVERRIDE_OVERRIDE_AOOO_BMSK = 0x2, ++ M_RD_CMD_OVERRIDE_OVERRIDE_AOOO_SHFT = 0x1, ++ M_RD_CMD_OVERRIDE_OVERRIDE_AINNERSHARED_BMSK = 0x1, ++ M_RD_CMD_OVERRIDE_OVERRIDE_AINNERSHARED_SHFT = 0x0, ++}; ++ ++#define M_WR_CMD_OVERRIDE_ADDR(b, n) \ ++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000250) ++enum bimc_m_write_command_override { ++ M_WR_CMD_OVERRIDE_RMSK = 0x3071f7f, ++ M_WR_CMD_OVERRIDE_AREQPRIO_BMSK = 0x3000000, ++ M_WR_CMD_OVERRIDE_AREQPRIO_SHFT = 0x18, ++ M_WR_CMD_OVERRIDE_AMEMTYPE_BMSK = 0x70000, ++ M_WR_CMD_OVERRIDE_AMEMTYPE_SHFT = 0x10, ++ M_WR_CMD_OVERRIDE_ATRANSIENT_BMSK = 0x1000, ++ M_WR_CMD_OVERRIDE_ATRANSIENT_SHFT = 0xc, ++ M_WR_CMD_OVERRIDE_ASHARED_BMSK = 0x800, ++ M_WR_CMD_OVERRIDE_ASHARED_SHFT = 0xb, ++ M_WR_CMD_OVERRIDE_AREDIRECT_BMSK = 0x400, ++ M_WR_CMD_OVERRIDE_AREDIRECT_SHFT = 0xa, ++ M_WR_CMD_OVERRIDE_AOOO_BMSK = 0x200, ++ M_WR_CMD_OVERRIDE_AOOO_SHFT = 0x9, ++ M_WR_CMD_OVERRIDE_AINNERSHARED_BMSK = 0x100, ++ M_WR_CMD_OVERRIDE_AINNERSHARED_SHFT = 0x8, ++ M_WR_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK = 0x40, ++ M_WR_CMD_OVERRIDE_OVERRIDE_AREQPRIO_SHFT = 0x6, ++ M_WR_CMD_OVERRIDE_OVERRIDE_ATRANSIENT_BMSK = 0x20, ++ M_WR_CMD_OVERRIDE_OVERRIDE_ATRANSIENT_SHFT = 0x5, ++ M_WR_CMD_OVERRIDE_OVERRIDE_AMEMTYPE_BMSK = 0x10, ++ M_WR_CMD_OVERRIDE_OVERRIDE_AMEMTYPE_SHFT = 0x4, ++ M_WR_CMD_OVERRIDE_OVERRIDE_ASHARED_BMSK = 0x8, ++ M_WR_CMD_OVERRIDE_OVERRIDE_ASHARED_SHFT = 0x3, ++ M_WR_CMD_OVERRIDE_OVERRIDE_AREDIRECT_BMSK = 0x4, ++ M_WR_CMD_OVERRIDE_OVERRIDE_AREDIRECT_SHFT = 0x2, ++ M_WR_CMD_OVERRIDE_OVERRIDE_AOOO_BMSK = 0x2, ++ M_WR_CMD_OVERRIDE_OVERRIDE_AOOO_SHFT = 0x1, ++ M_WR_CMD_OVERRIDE_OVERRIDE_AINNERSHARED_BMSK = 0x1, ++ M_WR_CMD_OVERRIDE_OVERRIDE_AINNERSHARED_SHFT = 0x0, ++}; ++ ++#define M_BKE_EN_ADDR(b, n) \ ++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000300) ++enum bimc_m_bke_en { ++ M_BKE_EN_RMSK = 0x1, ++ M_BKE_EN_EN_BMSK = 0x1, ++ M_BKE_EN_EN_SHFT = 0x0, ++}; ++ ++/* Grant Period registers */ ++#define M_BKE_GP_ADDR(b, n) \ ++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000304) ++enum bimc_m_bke_grant_period { ++ M_BKE_GP_RMSK = 0x3ff, ++ M_BKE_GP_GP_BMSK = 0x3ff, ++ M_BKE_GP_GP_SHFT = 0x0, ++}; ++ ++/* Grant count register. ++ * The Grant count register represents a signed 16 bit ++ * value, range 0-0x7fff ++ */ ++#define M_BKE_GC_ADDR(b, n) \ ++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000308) ++enum bimc_m_bke_grant_count { ++ M_BKE_GC_RMSK = 0xffff, ++ M_BKE_GC_GC_BMSK = 0xffff, ++ M_BKE_GC_GC_SHFT = 0x0, ++}; ++ ++/* Threshold High Registers */ ++#define M_BKE_THH_ADDR(b, n) \ ++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000320) ++enum bimc_m_bke_thresh_high { ++ M_BKE_THH_RMSK = 0xffff, ++ M_BKE_THH_THRESH_BMSK = 0xffff, ++ M_BKE_THH_THRESH_SHFT = 0x0, ++}; ++ ++/* Threshold Medium Registers */ ++#define M_BKE_THM_ADDR(b, n) \ ++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000324) ++enum bimc_m_bke_thresh_medium { ++ M_BKE_THM_RMSK = 0xffff, ++ M_BKE_THM_THRESH_BMSK = 0xffff, ++ M_BKE_THM_THRESH_SHFT = 0x0, ++}; ++ ++/* Threshold Low Registers */ ++#define M_BKE_THL_ADDR(b, n) \ ++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000328) ++enum bimc_m_bke_thresh_low { ++ M_BKE_THL_RMSK = 0xffff, ++ M_BKE_THL_THRESH_BMSK = 0xffff, ++ M_BKE_THL_THRESH_SHFT = 0x0, ++}; ++ ++#define M_BKE_HEALTH_0_CONFIG_ADDR(b, n) \ ++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000340) ++enum bimc_m_bke_health_0 { ++ M_BKE_HEALTH_0_CONFIG_RMSK = 0x80000303, ++ M_BKE_HEALTH_0_CONFIG_LIMIT_CMDS_BMSK = 0x80000000, ++ M_BKE_HEALTH_0_CONFIG_LIMIT_CMDS_SHFT = 0x1f, ++ M_BKE_HEALTH_0_CONFIG_AREQPRIO_BMSK = 0x300, ++ M_BKE_HEALTH_0_CONFIG_AREQPRIO_SHFT = 0x8, ++ M_BKE_HEALTH_0_CONFIG_PRIOLVL_BMSK = 0x3, ++ M_BKE_HEALTH_0_CONFIG_PRIOLVL_SHFT = 0x0, ++}; ++ ++#define M_BKE_HEALTH_1_CONFIG_ADDR(b, n) \ ++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000344) ++enum bimc_m_bke_health_1 { ++ M_BKE_HEALTH_1_CONFIG_RMSK = 0x80000303, ++ M_BKE_HEALTH_1_CONFIG_LIMIT_CMDS_BMSK = 0x80000000, ++ M_BKE_HEALTH_1_CONFIG_LIMIT_CMDS_SHFT = 0x1f, ++ M_BKE_HEALTH_1_CONFIG_AREQPRIO_BMSK = 0x300, ++ M_BKE_HEALTH_1_CONFIG_AREQPRIO_SHFT = 0x8, ++ M_BKE_HEALTH_1_CONFIG_PRIOLVL_BMSK = 0x3, ++ M_BKE_HEALTH_1_CONFIG_PRIOLVL_SHFT = 0x0, ++}; ++ ++#define M_BKE_HEALTH_2_CONFIG_ADDR(b, n) \ ++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000348) ++enum bimc_m_bke_health_2 { ++ M_BKE_HEALTH_2_CONFIG_RMSK = 0x80000303, ++ M_BKE_HEALTH_2_CONFIG_LIMIT_CMDS_BMSK = 0x80000000, ++ M_BKE_HEALTH_2_CONFIG_LIMIT_CMDS_SHFT = 0x1f, ++ M_BKE_HEALTH_2_CONFIG_AREQPRIO_BMSK = 0x300, ++ M_BKE_HEALTH_2_CONFIG_AREQPRIO_SHFT = 0x8, ++ M_BKE_HEALTH_2_CONFIG_PRIOLVL_BMSK = 0x3, ++ M_BKE_HEALTH_2_CONFIG_PRIOLVL_SHFT = 0x0, ++}; ++ ++#define M_BKE_HEALTH_3_CONFIG_ADDR(b, n) \ ++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x0000034c) ++enum bimc_m_bke_health_3 { ++ M_BKE_HEALTH_3_CONFIG_RMSK = 0x303, ++ M_BKE_HEALTH_3_CONFIG_AREQPRIO_BMSK = 0x300, ++ M_BKE_HEALTH_3_CONFIG_AREQPRIO_SHFT = 0x8, ++ M_BKE_HEALTH_3_CONFIG_PRIOLVL_BMSK = 0x3, ++ M_BKE_HEALTH_3_CONFIG_PRIOLVL_SHFT = 0x0, ++}; ++ ++#define M_BUF_STATUS_ADDR(b, n) \ ++ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000400) ++enum bimc_m_buf_status { ++ M_BUF_STATUS_RMSK = 0xf03f030, ++ M_BUF_STATUS_RCH_DATA_WR_FULL_BMSK = 0x8000000, ++ M_BUF_STATUS_RCH_DATA_WR_FULL_SHFT = 0x1b, ++ M_BUF_STATUS_RCH_DATA_WR_EMPTY_BMSK = 0x4000000, ++ M_BUF_STATUS_RCH_DATA_WR_EMPTY_SHFT = 0x1a, ++ M_BUF_STATUS_RCH_CTRL_WR_FULL_BMSK = 0x2000000, ++ M_BUF_STATUS_RCH_CTRL_WR_FULL_SHFT = 0x19, ++ M_BUF_STATUS_RCH_CTRL_WR_EMPTY_BMSK = 0x1000000, ++ M_BUF_STATUS_RCH_CTRL_WR_EMPTY_SHFT = 0x18, ++ M_BUF_STATUS_BCH_WR_FULL_BMSK = 0x20000, ++ M_BUF_STATUS_BCH_WR_FULL_SHFT = 0x11, ++ M_BUF_STATUS_BCH_WR_EMPTY_BMSK = 0x10000, ++ M_BUF_STATUS_BCH_WR_EMPTY_SHFT = 0x10, ++ M_BUF_STATUS_WCH_DATA_RD_FULL_BMSK = 0x8000, ++ M_BUF_STATUS_WCH_DATA_RD_FULL_SHFT = 0xf, ++ M_BUF_STATUS_WCH_DATA_RD_EMPTY_BMSK = 0x4000, ++ M_BUF_STATUS_WCH_DATA_RD_EMPTY_SHFT = 0xe, ++ M_BUF_STATUS_WCH_CTRL_RD_FULL_BMSK = 0x2000, ++ M_BUF_STATUS_WCH_CTRL_RD_FULL_SHFT = 0xd, ++ M_BUF_STATUS_WCH_CTRL_RD_EMPTY_BMSK = 0x1000, ++ M_BUF_STATUS_WCH_CTRL_RD_EMPTY_SHFT = 0xc, ++ M_BUF_STATUS_ACH_RD_FULL_BMSK = 0x20, ++ M_BUF_STATUS_ACH_RD_FULL_SHFT = 0x5, ++ M_BUF_STATUS_ACH_RD_EMPTY_BMSK = 0x10, ++ M_BUF_STATUS_ACH_RD_EMPTY_SHFT = 0x4, ++}; ++/*BIMC Generic */ ++ ++#define S_REG_BASE(b) ((b) + 0x00048000) ++ ++#define S_COMPONENT_INFO_ADDR(b, n) \ ++ (S_REG_BASE(b) + (0x8000 * (n)) + 0x00000000) ++enum bimc_s_component_info { ++ S_COMPONENT_INFO_RMSK = 0xffffff, ++ S_COMPONENT_INFO_INSTANCE_BMSK = 0xff0000, ++ S_COMPONENT_INFO_INSTANCE_SHFT = 0x10, ++ S_COMPONENT_INFO_SUB_TYPE_BMSK = 0xff00, ++ S_COMPONENT_INFO_SUB_TYPE_SHFT = 0x8, ++ S_COMPONENT_INFO_TYPE_BMSK = 0xff, ++ S_COMPONENT_INFO_TYPE_SHFT = 0x0, ++}; ++ ++#define S_HW_INFO_ADDR(b, n) \ ++ (S_REG_BASE(b) + (0x80000 * (n)) + 0x00000010) ++enum bimc_s_hw_info { ++ S_HW_INFO_RMSK = 0xffffffff, ++ S_HW_INFO_MAJOR_BMSK = 0xff000000, ++ S_HW_INFO_MAJOR_SHFT = 0x18, ++ S_HW_INFO_BRANCH_BMSK = 0xff0000, ++ S_HW_INFO_BRANCH_SHFT = 0x10, ++ S_HW_INFO_MINOR_BMSK = 0xff00, ++ S_HW_INFO_MINOR_SHFT = 0x8, ++ S_HW_INFO_ECO_BMSK = 0xff, ++ S_HW_INFO_ECO_SHFT = 0x0, ++}; ++ ++ ++/* S_SCMO_GENERIC */ ++ ++#define S_SCMO_REG_BASE(b) ((b) + 0x00048000) ++ ++#define S_SCMO_CONFIG_INFO_0_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000020) ++enum bimc_s_scmo_config_info_0 { ++ S_SCMO_CONFIG_INFO_0_RMSK = 0xffffffff, ++ S_SCMO_CONFIG_INFO_0_DATA_WIDTH_BMSK = 0xffff0000, ++ S_SCMO_CONFIG_INFO_0_DATA_WIDTH_SHFT = 0x10, ++ S_SCMO_CONFIG_INFO_0_TID_WIDTH_BMSK = 0xff00, ++ S_SCMO_CONFIG_INFO_0_TID_WIDTH_SHFT = 0x8, ++ S_SCMO_CONFIG_INFO_0_MID_WIDTH_BMSK = 0xff, ++ S_SCMO_CONFIG_INFO_0_MID_WIDTH_SHFT = 0x0, ++}; ++ ++#define S_SCMO_CONFIG_INFO_1_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000030) ++enum bimc_s_scmo_config_info_1 { ++ S_SCMO_CONFIG_INFO_1_RMSK = 0xffffffff, ++ S_SCMO_CONFIG_INFO_1_MPORT_CONNECTIVITY_BMSK = 0xffffffff, ++ S_SCMO_CONFIG_INFO_1_MPORT_CONNECTIVITY_SHFT = 0x0, ++}; ++ ++#define S_SCMO_CONFIG_INFO_2_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000040) ++enum bimc_s_scmo_config_info_2 { ++ S_SCMO_CONFIG_INFO_2_RMSK = 0xff00ff, ++ S_SCMO_CONFIG_INFO_2_NUM_GLOBAL_MONS_BMSK = 0xff0000, ++ S_SCMO_CONFIG_INFO_2_NUM_GLOBAL_MONS_SHFT = 0x10, ++ S_SCMO_CONFIG_INFO_2_VMID_WIDTH_BMSK = 0xff, ++ S_SCMO_CONFIG_INFO_2_VMID_WIDTH_SHFT = 0x0, ++}; ++ ++#define S_SCMO_CONFIG_INFO_3_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000050) ++enum bimc_s_scmo_config_info_3 { ++ S_SCMO_CONFIG_INFO_3_RMSK = 0xffffffff, ++ S_SCMO_CONFIG_INFO_3_RCH0_CTRL_DEPTH_BMSK = 0xff000000, ++ S_SCMO_CONFIG_INFO_3_RCH0_CTRL_DEPTH_SHFT = 0x18, ++ S_SCMO_CONFIG_INFO_3_RCH0_DEPTH_BMSK = 0xff0000, ++ S_SCMO_CONFIG_INFO_3_RCH0_DEPTH_SHFT = 0x10, ++ S_SCMO_CONFIG_INFO_3_BCH_DEPTH_BMSK = 0xff00, ++ S_SCMO_CONFIG_INFO_3_BCH_DEPTH_SHFT = 0x8, ++ S_SCMO_CONFIG_INFO_3_WCH_DEPTH_BMSK = 0xff, ++ S_SCMO_CONFIG_INFO_3_WCH_DEPTH_SHFT = 0x0, ++}; ++ ++#define S_SCMO_CONFIG_INFO_4_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000060) ++enum bimc_s_scmo_config_info_4 { ++ S_SCMO_CONFIG_INFO_4_RMSK = 0xffff, ++ S_SCMO_CONFIG_INFO_4_RCH1_CTRL_DEPTH_BMSK = 0xff00, ++ S_SCMO_CONFIG_INFO_4_RCH1_CTRL_DEPTH_SHFT = 0x8, ++ S_SCMO_CONFIG_INFO_4_RCH1_DEPTH_BMSK = 0xff, ++ S_SCMO_CONFIG_INFO_4_RCH1_DEPTH_SHFT = 0x0, ++}; ++ ++#define S_SCMO_CONFIG_INFO_5_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000070) ++enum bimc_s_scmo_config_info_5 { ++ S_SCMO_CONFIG_INFO_5_RMSK = 0xffff, ++ S_SCMO_CONFIG_INFO_5_DPE_CQ_DEPTH_BMSK = 0xff00, ++ S_SCMO_CONFIG_INFO_5_DPE_CQ_DEPTH_SHFT = 0x8, ++ S_SCMO_CONFIG_INFO_5_DDR_BUS_WIDTH_BMSK = 0xff, ++ S_SCMO_CONFIG_INFO_5_DDR_BUS_WIDTH_SHFT = 0x0, ++}; ++ ++#define S_SCMO_CONFIG_INFO_6_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000080) ++enum bimc_s_scmo_config_info_6 { ++ S_SCMO_CONFIG_INFO_6_RMSK = 0x1111, ++ S_SCMO_CONFIG_INFO_6_WBUFC_PIPE_BMSK = 0x1000, ++ S_SCMO_CONFIG_INFO_6_WBUFC_PIPE_SHFT = 0xc, ++ S_SCMO_CONFIG_INFO_6_RDOPT_PIPE_BMSK = 0x100, ++ S_SCMO_CONFIG_INFO_6_RDOPT_PIPE_SHFT = 0x8, ++ S_SCMO_CONFIG_INFO_6_ACHAN_INTF_PIPE_BMSK = 0x10, ++ S_SCMO_CONFIG_INFO_6_ACHAN_INTF_PIPE_SHFT = 0x4, ++ S_SCMO_CONFIG_INFO_6_ADDR_DECODE_HT_BMSK = 0x1, ++ S_SCMO_CONFIG_INFO_6_ADDR_DECODE_HT_SHFT = 0x0, ++}; ++ ++#define S_SCMO_INT_STATUS_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000100) ++enum bimc_s_scmo_int_status { ++ S_SCMO_INT_STATUS_RMSK = 0x1, ++ S_SCMO_INT_STATUS_ERR_OCCURED_BMSK = 0x1, ++ S_SCMO_INT_STATUS_ERR_OCCURED_SHFT = 0x0, ++}; ++ ++#define S_SCMO_INT_CLR_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000108) ++enum bimc_s_scmo_int_clr { ++ S_SCMO_INT_CLR_RMSK = 0x1, ++ S_SCMO_INT_CLR_IRQ_CLR_BMSK = 0x1, ++ S_SCMO_INT_CLR_IRQ_CLR_SHFT = 0x0, ++}; ++ ++#define S_SCMO_INT_EN_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x0000010c) ++enum bimc_s_scmo_int_en { ++ S_SCMO_INT_EN_RMSK = 0x1, ++ S_SCMO_INT_EN_IRQ_EN_BMSK = 0x1, ++ S_SCMO_INT_EN_IRQ_EN_SHFT = 0x0, ++}; ++ ++#define S_SCMO_ESYN_ADDR_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000120) ++enum bimc_s_scmo_esyn_addr { ++ S_SCMO_ESYN_ADDR_RMSK = 0xffffffff, ++ S_SCMO_ESYN_ADDR_ESYN_ADDR_ERR_ADDR_BMSK = 0xffffffff, ++ S_SCMO_ESYN_ADDR_ESYN_ADDR_ERR_ADDR_SHFT = 0x0, ++}; ++ ++#define S_SCMO_ESYN_APACKET_0_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000128) ++enum bimc_s_scmo_esyn_apacket_0 { ++ S_SCMO_ESYN_APACKET_0_RMSK = 0xff1fffff, ++ S_SCMO_ESYN_APACKET_0_ERR_ATID_BMSK = 0xff000000, ++ S_SCMO_ESYN_APACKET_0_ERR_ATID_SHFT = 0x18, ++ S_SCMO_ESYN_APACKET_0_ERR_AVMID_BMSK = 0x1f0000, ++ S_SCMO_ESYN_APACKET_0_ERR_AVMID_SHFT = 0x10, ++ S_SCMO_ESYN_APACKET_0_ERR_AMID_BMSK = 0xffff, ++ S_SCMO_ESYN_APACKET_0_ERR_AMID_SHFT = 0x0, ++}; ++ ++#define S_SCMO_ESYN_APACKET_1_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x0000012c) ++enum bimc_s_scmo_esyn_apacket_1 { ++ S_SCMO_ESYN_APACKET_1_RMSK = 0x10ff117, ++ S_SCMO_ESYN_APACKET_1_ERR_CODE_BMSK = 0x1000000, ++ S_SCMO_ESYN_APACKET_1_ERR_CODE_SHFT = 0x18, ++ S_SCMO_ESYN_APACKET_1_ERR_ALEN_BMSK = 0xf0000, ++ S_SCMO_ESYN_APACKET_1_ERR_ALEN_SHFT = 0x10, ++ S_SCMO_ESYN_APACKET_1_ERR_ASIZE_BMSK = 0xe000, ++ S_SCMO_ESYN_APACKET_1_ERR_ASIZE_SHFT = 0xd, ++ S_SCMO_ESYN_APACKET_1_ERR_ABURST_BMSK = 0x1000, ++ S_SCMO_ESYN_APACKET_1_ERR_ABURST_SHFT = 0xc, ++ S_SCMO_ESYN_APACKET_1_ERR_AEXCLUSIVE_BMSK = 0x100, ++ S_SCMO_ESYN_APACKET_1_ERR_AEXCLUSIVE_SHFT = 0x8, ++ S_SCMO_ESYN_APACKET_1_ERR_APRONTS_BMSK = 0x10, ++ S_SCMO_ESYN_APACKET_1_ERR_APRONTS_SHFT = 0x4, ++ S_SCMO_ESYN_APACKET_1_ERR_AOOORD_BMSK = 0x4, ++ S_SCMO_ESYN_APACKET_1_ERR_AOOORD_SHFT = 0x2, ++ S_SCMO_ESYN_APACKET_1_ERR_AOOOWR_BMSK = 0x2, ++ S_SCMO_ESYN_APACKET_1_ERR_AOOOWR_SHFT = 0x1, ++ S_SCMO_ESYN_APACKET_1_ERR_AWRITE_BMSK = 0x1, ++ S_SCMO_ESYN_APACKET_1_ERR_AWRITE_SHFT = 0x0, ++}; ++ ++#define S_SCMO_CLK_CTRL_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000200) ++enum bimc_s_scmo_clk_ctrl { ++ S_SCMO_CLK_CTRL_RMSK = 0xffff1111, ++ S_SCMO_CLK_CTRL_PEN_CMD_CG_EN_BMSK = 0x10000, ++ S_SCMO_CLK_CTRL_PEN_CMD_CG_EN_SHFT = 0x10, ++ S_SCMO_CLK_CTRL_RCH_CG_EN_BMSK = 0x1000, ++ S_SCMO_CLK_CTRL_RCH_CG_EN_SHFT = 0xc, ++ S_SCMO_CLK_CTRL_FLUSH_CG_EN_BMSK = 0x100, ++ S_SCMO_CLK_CTRL_FLUSH_CG_EN_SHFT = 0x8, ++ S_SCMO_CLK_CTRL_WCH_CG_EN_BMSK = 0x10, ++ S_SCMO_CLK_CTRL_WCH_CG_EN_SHFT = 0x4, ++ S_SCMO_CLK_CTRL_ACH_CG_EN_BMSK = 0x1, ++ S_SCMO_CLK_CTRL_ACH_CG_EN_SHFT = 0x0, ++}; ++ ++#define S_SCMO_SLV_INTERLEAVE_CFG_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000400) ++enum bimc_s_scmo_slv_interleave_cfg { ++ S_SCMO_SLV_INTERLEAVE_CFG_RMSK = 0xff, ++ S_SCMO_SLV_INTERLEAVE_CFG_INTERLEAVE_CS1_BMSK = 0x10, ++ S_SCMO_SLV_INTERLEAVE_CFG_INTERLEAVE_CS1_SHFT = 0x4, ++ S_SCMO_SLV_INTERLEAVE_CFG_INTERLEAVE_CS0_BMSK = 0x1, ++ S_SCMO_SLV_INTERLEAVE_CFG_INTERLEAVE_CS0_SHFT = 0x0, ++}; ++ ++#define S_SCMO_ADDR_BASE_CSn_ADDR(b, n, o) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000410 + 0x4 * (o)) ++enum bimc_s_scmo_addr_base_csn { ++ S_SCMO_ADDR_BASE_CSn_RMSK = 0xffff, ++ S_SCMO_ADDR_BASE_CSn_MAXn = 1, ++ S_SCMO_ADDR_BASE_CSn_ADDR_BASE_BMSK = 0xfc, ++ S_SCMO_ADDR_BASE_CSn_ADDR_BASE_SHFT = 0x2, ++}; ++ ++#define S_SCMO_ADDR_MAP_CSn_ADDR(b, n, o) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000420 + 0x4 * (o)) ++enum bimc_s_scmo_addr_map_csn { ++ S_SCMO_ADDR_MAP_CSn_RMSK = 0xffff, ++ S_SCMO_ADDR_MAP_CSn_MAXn = 1, ++ S_SCMO_ADDR_MAP_CSn_RANK_EN_BMSK = 0x8000, ++ S_SCMO_ADDR_MAP_CSn_RANK_EN_SHFT = 0xf, ++ S_SCMO_ADDR_MAP_CSn_ADDR_MODE_BMSK = 0x1000, ++ S_SCMO_ADDR_MAP_CSn_ADDR_MODE_SHFT = 0xc, ++ S_SCMO_ADDR_MAP_CSn_BANK_SIZE_BMSK = 0x100, ++ S_SCMO_ADDR_MAP_CSn_BANK_SIZE_SHFT = 0x8, ++ S_SCMO_ADDR_MAP_CSn_ROW_SIZE_BMSK = 0x30, ++ S_SCMO_ADDR_MAP_CSn_ROW_SIZE_SHFT = 0x4, ++ S_SCMO_ADDR_MAP_CSn_COL_SIZE_BMSK = 0x3, ++ S_SCMO_ADDR_MAP_CSn_COL_SIZE_SHFT = 0x0, ++}; ++ ++#define S_SCMO_ADDR_MASK_CSn_ADDR(b, n, o) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000430 + 0x4 * (0)) ++enum bimc_s_scmo_addr_mask_csn { ++ S_SCMO_ADDR_MASK_CSn_RMSK = 0xffff, ++ S_SCMO_ADDR_MASK_CSn_MAXn = 1, ++ S_SCMO_ADDR_MASK_CSn_ADDR_MASK_BMSK = 0xfc, ++ S_SCMO_ADDR_MASK_CSn_ADDR_MASK_SHFT = 0x2, ++}; ++ ++#define S_SCMO_SLV_STATUS_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000450) ++enum bimc_s_scmo_slv_status { ++ S_SCMO_SLV_STATUS_RMSK = 0xff3, ++ S_SCMO_SLV_STATUS_GLOBAL_MONS_IN_USE_BMSK = 0xff0, ++ S_SCMO_SLV_STATUS_GLOBAL_MONS_IN_USE_SHFT = 0x4, ++ S_SCMO_SLV_STATUS_SLAVE_IDLE_BMSK = 0x3, ++ S_SCMO_SLV_STATUS_SLAVE_IDLE_SHFT = 0x0, ++}; ++ ++#define S_SCMO_CMD_BUF_CFG_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000500) ++enum bimc_s_scmo_cmd_buf_cfg { ++ S_SCMO_CMD_BUF_CFG_RMSK = 0xf1f, ++ S_SCMO_CMD_BUF_CFG_CMD_ORDERING_BMSK = 0x300, ++ S_SCMO_CMD_BUF_CFG_CMD_ORDERING_SHFT = 0x8, ++ S_SCMO_CMD_BUF_CFG_HP_CMD_AREQPRIO_MAP_BMSK = 0x10, ++ S_SCMO_CMD_BUF_CFG_HP_CMD_AREQPRIO_MAP_SHFT = 0x4, ++ S_SCMO_CMD_BUF_CFG_HP_CMD_Q_DEPTH_BMSK = 0x7, ++ S_SCMO_CMD_BUF_CFG_HP_CMD_Q_DEPTH_SHFT = 0x0, ++}; ++ ++#define S_SCM_CMD_BUF_STATUS_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000520) ++enum bimc_s_scm_cmd_buf_status { ++ S_SCMO_CMD_BUF_STATUS_RMSK = 0x77, ++ S_SCMO_CMD_BUF_STATUS_HP_CMD_BUF_ENTRIES_IN_USE_BMSK = 0x70, ++ S_SCMO_CMD_BUF_STATUS_HP_CMD_BUF_ENTRIES_IN_USE_SHFT = 0x4, ++ S_SCMO_CMD_BUF_STATUS_LP_CMD_BUF_ENTRIES_IN_USE_BMSK = 0x7, ++ S_SCMO_CMD_BUF_STATUS_LP_CMD_BUF_ENTRIES_IN_USE_SHFT = 0x0, ++}; ++ ++#define S_SCMO_RCH_SEL_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000540) ++enum bimc_s_scmo_rch_sel { ++ S_SCMO_RCH_SEL_RMSK = 0xffffffff, ++ S_SCMO_CMD_BUF_STATUS_RCH_PORTS_BMSK = 0xffffffff, ++ S_SCMO_CMD_BUF_STATUS_RCH_PORTS_SHFT = 0x0, ++}; ++ ++#define S_SCMO_RCH_BKPR_CFG_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000544) ++enum bimc_s_scmo_rch_bkpr_cfg { ++ S_SCMO_RCH_BKPR_CFG_RMSK = 0xffffffff, ++ S_SCMO_RCH_BKPR_CFG_RCH1_FIFO_BKPR_HI_TH_BMSK = 0x3f000000, ++ S_SCMO_RCH_BKPR_CFG_RCH1_FIFO_BKPR_HI_TH_SHFT = 0x18, ++ S_SCMO_RCH_BKPR_CFG_RCH1_FIFO_BKPR_LO_TH_BMSK = 0x3f0000, ++ S_SCMO_RCH_BKPR_CFG_RCH1_FIFO_BKPR_LO_TH_SHFT = 0x10, ++ S_SCMO_RCH_BKPR_CFG_RCH0_FIFO_BKPR_HI_TH_BMSK = 0x3f00, ++ S_SCMO_RCH_BKPR_CFG_RCH0_FIFO_BKPR_HI_TH_SHFT = 0x8, ++ S_SCMO_RCH_BKPR_CFG_RCH0_FIFO_BKPR_LO_TH_BMSK = 0x3f, ++ S_SCMO_RCH_BKPR_CFG_RCH0_FIFO_BKPR_LO_TH_SHFT = 0x0, ++}; ++ ++#define S_SCMO_RCH_STATUS_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000560) ++enum bimc_s_scmo_rch_status { ++ S_SCMO_RCH_STATUS_RMSK = 0x33333, ++ S_SCMO_RCH_STATUS_PRQ_FIFO_FULL_BMSK = 0x20000, ++ S_SCMO_RCH_STATUS_PRQ_FIFO_FULL_SHFT = 0x11, ++ S_SCMO_RCH_STATUS_PRQ_FIFO_EMPTY_BMSK = 0x10000, ++ S_SCMO_RCH_STATUS_PRQ_FIFO_EMPTY_SHFT = 0x10, ++ S_SCMO_RCH_STATUS_RCH1_QUAL_FIFO_FULL_BMSK = 0x2000, ++ S_SCMO_RCH_STATUS_RCH1_QUAL_FIFO_FULL_SHFT = 0xd, ++ S_SCMO_RCH_STATUS_RCH1_QUAL_FIFO_EMPTY_BMSK = 0x1000, ++ S_SCMO_RCH_STATUS_RCH1_QUAL_FIFO_EMPTY_SHFT = 0xc, ++ S_SCMO_RCH_STATUS_RCH1_DATA_FIFO_FULL_BMSK = 0x200, ++ S_SCMO_RCH_STATUS_RCH1_DATA_FIFO_FULL_SHFT = 0x9, ++ S_SCMO_RCH_STATUS_RCH1_DATA_FIFO_EMPTY_BMSK = 0x100, ++ S_SCMO_RCH_STATUS_RCH1_DATA_FIFO_EMPTY_SHFT = 0x8, ++ S_SCMO_RCH_STATUS_RCH0_QUAL_FIFO_FULL_BMSK = 0x20, ++ S_SCMO_RCH_STATUS_RCH0_QUAL_FIFO_FULL_SHFT = 0x5, ++ S_SCMO_RCH_STATUS_RCH0_QUAL_FIFO_EMPTY_BMSK = 0x10, ++ S_SCMO_RCH_STATUS_RCH0_QUAL_FIFO_EMPTY_SHFT = 0x4, ++ S_SCMO_RCH_STATUS_RCH0_DATA_FIFO_FULL_BMSK = 0x2, ++ S_SCMO_RCH_STATUS_RCH0_DATA_FIFO_FULL_SHFT = 0x1, ++ S_SCMO_RCH_STATUS_RCH0_DATA_FIFO_EMPTY_BMSK = 0x1, ++ S_SCMO_RCH_STATUS_RCH0_DATA_FIFO_EMPTY_SHFT = 0x0, ++}; ++ ++#define S_SCMO_WCH_BUF_CFG_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000580) ++enum bimc_s_scmo_wch_buf_cfg { ++ S_SCMO_WCH_BUF_CFG_RMSK = 0xff, ++ S_SCMO_WCH_BUF_CFG_WRITE_BLOCK_READ_BMSK = 0x10, ++ S_SCMO_WCH_BUF_CFG_WRITE_BLOCK_READ_SHFT = 0x4, ++ S_SCMO_WCH_BUF_CFG_COALESCE_EN_BMSK = 0x1, ++ S_SCMO_WCH_BUF_CFG_COALESCE_EN_SHFT = 0x0, ++}; ++ ++#define S_SCMO_WCH_STATUS_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x000005a0) ++enum bimc_s_scmo_wch_status { ++ S_SCMO_WCH_STATUS_RMSK = 0x333, ++ S_SCMO_WCH_STATUS_BRESP_FIFO_FULL_BMSK = 0x200, ++ S_SCMO_WCH_STATUS_BRESP_FIFO_FULL_SHFT = 0x9, ++ S_SCMO_WCH_STATUS_BRESP_FIFO_EMPTY_BMSK = 0x100, ++ S_SCMO_WCH_STATUS_BRESP_FIFO_EMPTY_SHFT = 0x8, ++ S_SCMO_WCH_STATUS_WDATA_FIFO_FULL_BMSK = 0x20, ++ S_SCMO_WCH_STATUS_WDATA_FIFO_FULL_SHFT = 0x5, ++ S_SCMO_WCH_STATUS_WDATA_FIFO_EMPTY_BMSK = 0x10, ++ S_SCMO_WCH_STATUS_WDATA_FIFO_EMPTY_SHFT = 0x4, ++ S_SCMO_WCH_STATUS_WBUF_FULL_BMSK = 0x2, ++ S_SCMO_WCH_STATUS_WBUF_FULL_SHFT = 0x1, ++ S_SCMO_WCH_STATUS_WBUF_EMPTY_BMSK = 0x1, ++ S_SCMO_WCH_STATUS_WBUF_EMPTY_SHFT = 0x0, ++}; ++ ++#define S_SCMO_FLUSH_CFG_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x000005c0) ++enum bimc_s_scmo_flush_cfg { ++ S_SCMO_FLUSH_CFG_RMSK = 0xffffffff, ++ S_SCMO_FLUSH_CFG_FLUSH_IN_ORDER_BMSK = 0x10000000, ++ S_SCMO_FLUSH_CFG_FLUSH_IN_ORDER_SHFT = 0x1c, ++ S_SCMO_FLUSH_CFG_FLUSH_IDLE_DELAY_BMSK = 0x3ff0000, ++ S_SCMO_FLUSH_CFG_FLUSH_IDLE_DELAY_SHFT = 0x10, ++ S_SCMO_FLUSH_CFG_FLUSH_UPPER_LIMIT_BMSK = 0xf00, ++ S_SCMO_FLUSH_CFG_FLUSH_UPPER_LIMIT_SHFT = 0x8, ++ S_SCMO_FLUSH_CFG_FLUSH_LOWER_LIMIT_BMSK = 0xf, ++ S_SCMO_FLUSH_CFG_FLUSH_LOWER_LIMIT_SHFT = 0x0, ++}; ++ ++#define S_SCMO_FLUSH_CMD_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x000005c4) ++enum bimc_s_scmo_flush_cmd { ++ S_SCMO_FLUSH_CMD_RMSK = 0xf, ++ S_SCMO_FLUSH_CMD_FLUSH_ALL_BUF_BMSK = 0x3, ++ S_SCMO_FLUSH_CMD_FLUSH_ALL_BUF_SHFT = 0x0, ++}; ++ ++#define S_SCMO_CMD_OPT_CFG0_ADDR(b, n) \ ++ (S_SCM0_REG_BASE(b) + (0x8000 * (n)) + 0x00000700) ++enum bimc_s_scmo_cmd_opt_cfg0 { ++ S_SCMO_CMD_OPT_CFG0_RMSK = 0xffffff, ++ S_SCMO_CMD_OPT_CFG0_IGNORE_BANK_UNAVL_BMSK = 0x100000, ++ S_SCMO_CMD_OPT_CFG0_IGNORE_BANK_UNAVL_SHFT = 0x14, ++ S_SCMO_CMD_OPT_CFG0_MASK_CMDOUT_PRI_BMSK = 0x10000, ++ S_SCMO_CMD_OPT_CFG0_MASK_CMDOUT_PRI_SHFT = 0x10, ++ S_SCMO_CMD_OPT_CFG0_DPE_CMD_REORDERING_BMSK = 0x1000, ++ S_SCMO_CMD_OPT_CFG0_DPE_CMD_REORDERING_SHFT = 0xc, ++ S_SCMO_CMD_OPT_CFG0_WR_OPT_EN_BMSK = 0x100, ++ S_SCMO_CMD_OPT_CFG0_WR_OPT_EN_SHFT = 0x8, ++ S_SCMO_CMD_OPT_CFG0_RD_OPT_EN_BMSK = 0x10, ++ S_SCMO_CMD_OPT_CFG0_RD_OPT_EN_SHFT = 0x4, ++ S_SCMO_CMD_OPT_CFG0_PAGE_MGMT_POLICY_BMSK = 0x1, ++ S_SCMO_CMD_OPT_CFG0_PAGE_MGMT_POLICY_SHFT = 0x0, ++}; ++ ++#define S_SCMO_CMD_OPT_CFG1_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000704) ++enum bimc_s_scmo_cmd_opt_cfg1 { ++ S_SCMO_CMD_OPT_CFG1_RMSK = 0xffffffff, ++ S_SCMO_CMD_OPT_CFG1_HSTP_CMD_TIMEOUT_BMSK = 0x1f000000, ++ S_SCMO_CMD_OPT_CFG1_HSTP_CMD_TIMEOUT_SHFT = 0x18, ++ S_SCMO_CMD_OPT_CFG1_HP_CMD_TIMEOUT_BMSK = 0x1f0000, ++ S_SCMO_CMD_OPT_CFG1_HP_CMD_TIMEOUT_SHFT = 0x10, ++ S_SCMO_CMD_OPT_CFG1_MP_CMD_TIMEOUT_BMSK = 0x1f00, ++ S_SCMO_CMD_OPT_CFG1_MP_CMD_TIMEOUT_SHFT = 0x8, ++ S_SCMO_CMD_OPT_CFG1_LP_CMD_TIMEOUT_BMSK = 0x1f, ++ S_SCMO_CMD_OPT_CFG1_LP_CMD_TIMEOUT_SHFT = 0x0, ++}; ++ ++#define S_SCMO_CMD_OPT_CFG2_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000708) ++enum bimc_s_scmo_cmd_opt_cfg2 { ++ S_SCMO_CMD_OPT_CFG2_RMSK = 0xff, ++ S_SCMO_CMD_OPT_CFG2_RWOPT_CMD_TIMEOUT_BMSK = 0xf, ++ S_SCMO_CMD_OPT_CFG2_RWOPT_CMD_TIMEOUT_SHFT = 0x0, ++}; ++ ++#define S_SCMO_CMD_OPT_CFG3_ADDR(b, n) \ ++ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x0000070c) ++enum bimc_s_scmo_cmd_opt_cfg3 { ++ S_SCMO_CMD_OPT_CFG3_RMSK = 0xff, ++ S_SCMO_CMD_OPT_CFG3_FLUSH_CMD_TIMEOUT_BMSK = 0xf, ++ S_SCMO_CMD_OPT_CFG3_FLUSH_CMD_TIMEOUT_SHFT = 0x0, ++}; ++ ++/* S_SWAY_GENERIC */ ++#define S_SWAY_REG_BASE(b) ((b) + 0x00048000) ++ ++#define S_SWAY_CONFIG_INFO_0_ADDR(b, n) \ ++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000020) ++enum bimc_s_sway_config_info_0 { ++ S_SWAY_CONFIG_INFO_0_RMSK = 0xff0000ff, ++ S_SWAY_CONFIG_INFO_0_SYNC_MODE_BMSK = 0xff000000, ++ S_SWAY_CONFIG_INFO_0_SYNC_MODE_SHFT = 0x18, ++ S_SWAY_CONFIG_INFO_0_FUNC_BMSK = 0xff, ++ S_SWAY_CONFIG_INFO_0_FUNC_SHFT = 0x0, ++}; ++ ++#define S_SWAY_CONFIG_INFO_1_ADDR(b, n) \ ++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000030) ++enum bimc_s_sway_config_info_1 { ++ S_SWAY_CONFIG_INFO_1_RMSK = 0xffffffff, ++ S_SWAY_CONFIG_INFO_1_MPORT_CONNECTIVITY_BMSK = 0xffffffff, ++ S_SWAY_CONFIG_INFO_1_MPORT_CONNECTIVITY_SHFT = 0x0, ++}; ++ ++#define S_SWAY_CONFIG_INFO_2_ADDR(b, n) \ ++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000040) ++enum bimc_s_sway_config_info_2 { ++ S_SWAY_CONFIG_INFO_2_RMSK = 0xffff0000, ++ S_SWAY_CONFIG_INFO_2_MPORT_CONNECTIVITY_BMSK = 0xffff0000, ++ S_SWAY_CONFIG_INFO_2_MPORT_CONNECTIVITY_SHFT = 0x10, ++}; ++ ++#define S_SWAY_CONFIG_INFO_3_ADDR(b, n) \ ++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000050) ++enum bimc_s_sway_config_info_3 { ++ S_SWAY_CONFIG_INFO_3_RMSK = 0xffffffff, ++ S_SWAY_CONFIG_INFO_3_RCH0_DEPTH_BMSK = 0xff000000, ++ S_SWAY_CONFIG_INFO_3_RCH0_DEPTH_SHFT = 0x18, ++ S_SWAY_CONFIG_INFO_3_BCH_DEPTH_BMSK = 0xff0000, ++ S_SWAY_CONFIG_INFO_3_BCH_DEPTH_SHFT = 0x10, ++ S_SWAY_CONFIG_INFO_3_WCH_DEPTH_BMSK = 0xff, ++ S_SWAY_CONFIG_INFO_3_WCH_DEPTH_SHFT = 0x0, ++}; ++ ++#define S_SWAY_CONFIG_INFO_4_ADDR(b, n) \ ++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000060) ++enum bimc_s_sway_config_info_4 { ++ S_SWAY_CONFIG_INFO_4_RMSK = 0x800000ff, ++ S_SWAY_CONFIG_INFO_4_DUAL_RCH_EN_BMSK = 0x80000000, ++ S_SWAY_CONFIG_INFO_4_DUAL_RCH_EN_SHFT = 0x1f, ++ S_SWAY_CONFIG_INFO_4_RCH1_DEPTH_BMSK = 0xff, ++ S_SWAY_CONFIG_INFO_4_RCH1_DEPTH_SHFT = 0x0, ++}; ++ ++#define S_SWAY_CONFIG_INFO_5_ADDR(b, n) \ ++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000070) ++enum bimc_s_sway_config_info_5 { ++ S_SWAY_CONFIG_INFO_5_RMSK = 0x800000ff, ++ S_SWAY_CONFIG_INFO_5_QCH_EN_BMSK = 0x80000000, ++ S_SWAY_CONFIG_INFO_5_QCH_EN_SHFT = 0x1f, ++ S_SWAY_CONFIG_INFO_5_QCH_DEPTH_BMSK = 0xff, ++ S_SWAY_CONFIG_INFO_5_QCH_DEPTH_SHFT = 0x0, ++}; ++ ++#define S_SWAY_CONFIG_INFO_6_ADDR(b, n) \ ++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000080) ++enum bimc_s_sway_config_info_6 { ++ S_SWAY_CONFIG_INFO_6_RMSK = 0x1, ++ S_SWAY_CONFIG_INFO_6_S2SW_PIPELINE_EN_BMSK = 0x1, ++ S_SWAY_CONFIG_INFO_6_S2SW_PIPELINE_EN_SHFT = 0x0, ++}; ++ ++#define S_SWAY_INT_STATUS_ADDR(b, n) \ ++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000100) ++enum bimc_s_sway_int_status { ++ S_SWAY_INT_STATUS_RMSK = 0x3, ++ S_SWAY_INT_STATUS_RFU_BMSK = 0x3, ++ S_SWAY_INT_STATUS_RFU_SHFT = 0x0, ++}; ++ ++#define S_SWAY_INT_CLR_ADDR(b, n) \ ++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000108) ++enum bimc_s_sway_int_clr { ++ S_SWAY_INT_CLR_RMSK = 0x3, ++ S_SWAY_INT_CLR_RFU_BMSK = 0x3, ++ S_SWAY_INT_CLR_RFU_SHFT = 0x0, ++}; ++ ++ ++#define S_SWAY_INT_EN_ADDR(b, n) \ ++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x0000010c) ++enum bimc_s_sway_int_en { ++ S_SWAY_INT_EN_RMSK = 0x3, ++ S_SWAY_INT_EN_RFU_BMSK = 0x3, ++ S_SWAY_INT_EN_RFU_SHFT = 0x0, ++}; ++ ++#define S_SWAY_CLK_CTRL_ADDR(b, n) \ ++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000200) ++enum bimc_s_sway_clk_ctrl { ++ S_SWAY_CLK_CTRL_RMSK = 0x3, ++ S_SWAY_CLK_CTRL_SLAVE_CLK_GATING_EN_BMSK = 0x2, ++ S_SWAY_CLK_CTRL_SLAVE_CLK_GATING_EN_SHFT = 0x1, ++ S_SWAY_CLK_CTRL_CORE_CLK_GATING_EN_BMSK = 0x1, ++ S_SWAY_CLK_CTRL_CORE_CLK_GATING_EN_SHFT = 0x0, ++}; ++ ++#define S_SWAY_RCH_SEL_ADDR(b, n) \ ++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000210) ++enum bimc_s_sway_rch_sel { ++ S_SWAY_RCH_SEL_RMSK = 0x7f, ++ S_SWAY_RCH_SEL_UNUSED_BMSK = 0x7f, ++ S_SWAY_RCH_SEL_UNUSED_SHFT = 0x0, ++}; ++ ++ ++#define S_SWAY_MAX_OUTSTANDING_REQS_ADDR(b, n) \ ++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000220) ++enum bimc_s_sway_max_outstanding_reqs { ++ S_SWAY_MAX_OUTSTANDING_REQS_RMSK = 0xffff, ++ S_SWAY_MAX_OUTSTANDING_REQS_WRITE_BMSK = 0xff00, ++ S_SWAY_MAX_OUTSTANDING_REQS_WRITE_SHFT = 0x8, ++ S_SWAY_MAX_OUTSTANDING_REQS_READ_BMSK = 0xff, ++ S_SWAY_MAX_OUTSTANDING_REQS_READ_SHFT = 0x0, ++}; ++ ++ ++#define S_SWAY_BUF_STATUS_0_ADDR(b, n) \ ++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000400) ++enum bimc_s_sway_buf_status_0 { ++ S_SWAY_BUF_STATUS_0_RMSK = 0xf0300f03, ++ S_SWAY_BUF_STATUS_0_RCH0_DATA_RD_FULL_BMSK = 0x80000000, ++ S_SWAY_BUF_STATUS_0_RCH0_DATA_RD_FULL_SHFT = 0x1f, ++ S_SWAY_BUF_STATUS_0_RCH0_DATA_RD_EMPTY_BMSK = 0x40000000, ++ S_SWAY_BUF_STATUS_0_RCH0_DATA_RD_EMPTY_SHFT = 0x1e, ++ S_SWAY_BUF_STATUS_0_RCH0_CTRL_RD_FULL_BMSK = 0x20000000, ++ S_SWAY_BUF_STATUS_0_RCH0_CTRL_RD_FULL_SHFT = 0x1d, ++ S_SWAY_BUF_STATUS_0_RCH0_CTRL_RD_EMPTY_BMSK = 0x10000000, ++ S_SWAY_BUF_STATUS_0_RCH0_CTRL_RD_EMPTY_SHFT = 0x1c, ++ S_SWAY_BUF_STATUS_0_BCH_RD_FULL_BMSK = 0x200000, ++ S_SWAY_BUF_STATUS_0_BCH_RD_FULL_SHFT = 0x15, ++ S_SWAY_BUF_STATUS_0_BCH_RD_EMPTY_BMSK = 0x100000, ++ S_SWAY_BUF_STATUS_0_BCH_RD_EMPTY_SHFT = 0x14, ++ S_SWAY_BUF_STATUS_0_WCH_DATA_WR_FULL_BMSK = 0x800, ++ S_SWAY_BUF_STATUS_0_WCH_DATA_WR_FULL_SHFT = 0xb, ++ S_SWAY_BUF_STATUS_0_WCH_DATA_WR_EMPTY_BMSK = 0x400, ++ S_SWAY_BUF_STATUS_0_WCH_DATA_WR_EMPTY_SHFT = 0xa, ++ S_SWAY_BUF_STATUS_0_WCH_CTRL_WR_FULL_BMSK = 0x200, ++ S_SWAY_BUF_STATUS_0_WCH_CTRL_WR_FULL_SHFT = 0x9, ++ S_SWAY_BUF_STATUS_0_WCH_CTRL_WR_EMPTY_BMSK = 0x100, ++ S_SWAY_BUF_STATUS_0_WCH_CTRL_WR_EMPTY_SHFT = 0x8, ++ S_SWAY_BUF_STATUS_0_ACH_WR_FULL_BMSK = 0x2, ++ S_SWAY_BUF_STATUS_0_ACH_WR_FULL_SHFT = 0x1, ++ S_SWAY_BUF_STATUS_0_ACH_WR_EMPTY_BMSK = 0x1, ++ S_SWAY_BUF_STATUS_0_ACH_WR_EMPTY_SHFT = 0x0, ++}; ++ ++#define S_SWAY_BUF_STATUS_1_ADDR(b, n) \ ++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000410) ++enum bimc_s_sway_buf_status_1 { ++ S_SWAY_BUF_STATUS_1_RMSK = 0xf0, ++ S_SWAY_BUF_STATUS_1_RCH1_DATA_RD_FULL_BMSK = 0x80, ++ S_SWAY_BUF_STATUS_1_RCH1_DATA_RD_FULL_SHFT = 0x7, ++ S_SWAY_BUF_STATUS_1_RCH1_DATA_RD_EMPTY_BMSK = 0x40, ++ S_SWAY_BUF_STATUS_1_RCH1_DATA_RD_EMPTY_SHFT = 0x6, ++ S_SWAY_BUF_STATUS_1_RCH1_CTRL_RD_FULL_BMSK = 0x20, ++ S_SWAY_BUF_STATUS_1_RCH1_CTRL_RD_FULL_SHFT = 0x5, ++ S_SWAY_BUF_STATUS_1_RCH1_CTRL_RD_EMPTY_BMSK = 0x10, ++ S_SWAY_BUF_STATUS_1_RCH1_CTRL_RD_EMPTY_SHFT = 0x4, ++}; ++ ++#define S_SWAY_BUF_STATUS_2_ADDR(b, n) \ ++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000420) ++enum bimc_s_sway_buf_status_2 { ++ S_SWAY_BUF_STATUS_2_RMSK = 0x30, ++ S_SWAY_BUF_STATUS_2_QCH_RD_FULL_BMSK = 0x20, ++ S_SWAY_BUF_STATUS_2_QCH_RD_FULL_SHFT = 0x5, ++ S_SWAY_BUF_STATUS_2_QCH_RD_EMPTY_BMSK = 0x10, ++ S_SWAY_BUF_STATUS_2_QCH_RD_EMPTY_SHFT = 0x4, ++}; ++ ++/* S_ARB_GENERIC */ ++ ++#define S_ARB_REG_BASE(b) ((b) + 0x00049000) ++ ++#define S_ARB_COMPONENT_INFO_ADDR(b, n) \ ++ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000000) ++enum bimc_s_arb_component_info { ++ S_ARB_COMPONENT_INFO_RMSK = 0xffffff, ++ S_ARB_COMPONENT_INFO_INSTANCE_BMSK = 0xff0000, ++ S_ARB_COMPONENT_INFO_INSTANCE_SHFT = 0x10, ++ S_ARB_COMPONENT_INFO_SUB_TYPE_BMSK = 0xff00, ++ S_ARB_COMPONENT_INFO_SUB_TYPE_SHFT = 0x8, ++ S_ARB_COMPONENT_INFO_TYPE_BMSK = 0xff, ++ S_ARB_COMPONENT_INFO_TYPE_SHFT = 0x0, ++}; ++ ++#define S_ARB_CONFIG_INFO_0_ADDR(b, n) \ ++ (S_ARB_REG_BASE(b) + (0x8000 * (n)) + 0x00000020) ++enum bimc_s_arb_config_info_0 { ++ S_ARB_CONFIG_INFO_0_RMSK = 0x800000ff, ++ S_ARB_CONFIG_INFO_0_ARB2SW_PIPELINE_EN_BMSK = 0x80000000, ++ S_ARB_CONFIG_INFO_0_ARB2SW_PIPELINE_EN_SHFT = 0x1f, ++ S_ARB_CONFIG_INFO_0_FUNC_BMSK = 0xff, ++ S_ARB_CONFIG_INFO_0_FUNC_SHFT = 0x0, ++}; ++ ++#define S_ARB_CONFIG_INFO_1_ADDR(b, n) \ ++ (S_ARB_REG_BASE(b) + (0x8000 * (n)) + 0x00000030) ++enum bimc_s_arb_config_info_1 { ++ S_ARB_CONFIG_INFO_1_RMSK = 0xffffffff, ++ S_ARB_CONFIG_INFO_1_MPORT_CONNECTIVITY_BMSK = 0xffffffff, ++ S_ARB_CONFIG_INFO_1_MPORT_CONNECTIVITY_SHFT = 0x0, ++}; ++ ++#define S_ARB_CLK_CTRL_ADDR(b) \ ++ (S_ARB_REG_BASE(b) + (0x8000 * (n)) + 0x00000200) ++enum bimc_s_arb_clk_ctrl { ++ S_ARB_CLK_CTRL_RMSK = 0x1, ++ S_ARB_CLK_CTRL_SLAVE_CLK_GATING_EN_BMSK = 0x2, ++ S_ARB_CLK_CTRL_SLAVE_CLK_GATING_EN_SHFT = 0x1, ++ S_ARB_CLK_CTRL_CORE_CLK_GATING_EN_BMSK = 0x1, ++ S_ARB_CLK_CTRL_CORE_CLK_GATING_EN_SHFT = 0x0, ++ S_ARB_CLK_CTRL_CLK_GATING_EN_BMSK = 0x1, ++ S_ARB_CLK_CTRL_CLK_GATING_EN_SHFT = 0x0, ++}; ++ ++#define S_ARB_MODE_ADDR(b, n) \ ++ (S_ARB_REG_BASE(b) + (0x8000 * (n)) + 0x00000210) ++enum bimc_s_arb_mode { ++ S_ARB_MODE_RMSK = 0xf0000001, ++ S_ARB_MODE_WR_GRANTS_AHEAD_BMSK = 0xf0000000, ++ S_ARB_MODE_WR_GRANTS_AHEAD_SHFT = 0x1c, ++ S_ARB_MODE_PRIO_RR_EN_BMSK = 0x1, ++ S_ARB_MODE_PRIO_RR_EN_SHFT = 0x0, ++}; ++ ++#define BKE_HEALTH_MASK \ ++ (M_BKE_HEALTH_0_CONFIG_LIMIT_CMDS_BMSK |\ ++ M_BKE_HEALTH_0_CONFIG_AREQPRIO_BMSK |\ ++ M_BKE_HEALTH_0_CONFIG_PRIOLVL_BMSK) ++ ++#define BKE_HEALTH_VAL(limit, areq, plvl) \ ++ ((((limit) << M_BKE_HEALTH_0_CONFIG_LIMIT_CMDS_SHFT) & \ ++ M_BKE_HEALTH_0_CONFIG_LIMIT_CMDS_BMSK) | \ ++ (((areq) << M_BKE_HEALTH_0_CONFIG_AREQPRIO_SHFT) & \ ++ M_BKE_HEALTH_0_CONFIG_AREQPRIO_BMSK) | \ ++ (((plvl) << M_BKE_HEALTH_0_CONFIG_PRIOLVL_SHFT) & \ ++ M_BKE_HEALTH_0_CONFIG_PRIOLVL_BMSK)) ++ ++#define MAX_GRANT_PERIOD \ ++ (M_BKE_GP_GP_BMSK >> \ ++ M_BKE_GP_GP_SHFT) ++ ++#define MAX_GC \ ++ (M_BKE_GC_GC_BMSK >> \ ++ (M_BKE_GC_GC_SHFT + 1)) ++ ++static int bimc_div(int64_t *a, uint32_t b) ++{ ++ if ((*a > 0) && (*a < b)) { ++ *a = 0; ++ return 1; ++ } else { ++ return do_div(*a, b); ++ } ++} ++ ++#define ENABLE(val) ((val) == 1 ? 1 : 0) ++void msm_bus_bimc_set_mas_clk_gate(struct msm_bus_bimc_info *binfo, ++ uint32_t mas_index, struct msm_bus_bimc_clk_gate *bgate) ++{ ++ uint32_t val, mask, reg_val; ++ void __iomem *addr; ++ ++ reg_val = readl_relaxed(M_CLK_CTRL_ADDR(binfo->base, ++ mas_index)) & M_CLK_CTRL_RMSK; ++ addr = M_CLK_CTRL_ADDR(binfo->base, mas_index); ++ mask = (M_CLK_CTRL_MAS_CLK_GATING_EN_BMSK | ++ M_CLK_CTRL_CORE_CLK_GATING_EN_BMSK); ++ val = (bgate->core_clk_gate_en << ++ M_CLK_CTRL_MAS_CLK_GATING_EN_SHFT) | ++ bgate->port_clk_gate_en; ++ writel_relaxed(((reg_val & (~mask)) | (val & mask)), addr); ++ /* Ensure clock gating enable mask is set before exiting */ ++ wmb(); ++} ++ ++void msm_bus_bimc_arb_en(struct msm_bus_bimc_info *binfo, ++ uint32_t slv_index, bool en) ++{ ++ uint32_t reg_val, reg_mask_val, enable, val; ++ ++ reg_mask_val = (readl_relaxed(S_ARB_CONFIG_INFO_0_ADDR(binfo-> ++ base, slv_index)) & S_ARB_CONFIG_INFO_0_FUNC_BMSK) ++ >> S_ARB_CONFIG_INFO_0_FUNC_SHFT; ++ enable = ENABLE(en); ++ val = enable << S_ARB_MODE_PRIO_RR_EN_SHFT; ++ if (reg_mask_val == BIMC_ARB_MODE_PRIORITY_RR) { ++ reg_val = readl_relaxed(S_ARB_CONFIG_INFO_0_ADDR(binfo-> ++ base, slv_index)) & S_ARB_MODE_RMSK; ++ writel_relaxed(((reg_val & (~(S_ARB_MODE_PRIO_RR_EN_BMSK))) | ++ (val & S_ARB_MODE_PRIO_RR_EN_BMSK)), ++ S_ARB_MODE_ADDR(binfo->base, slv_index)); ++ /* Ensure arbitration mode is set before returning */ ++ wmb(); ++ } ++} ++ ++static void set_qos_mode(void __iomem *baddr, uint32_t index, uint32_t val0, ++ uint32_t val1, uint32_t val2) ++{ ++ uint32_t reg_val, val; ++ ++ reg_val = readl_relaxed(M_PRIOLVL_OVERRIDE_ADDR(baddr, ++ index)) & M_PRIOLVL_OVERRIDE_RMSK; ++ val = val0 << M_PRIOLVL_OVERRIDE_OVERRIDE_PRIOLVL_SHFT; ++ writel_relaxed(((reg_val & ~(M_PRIOLVL_OVERRIDE_OVERRIDE_PRIOLVL_BMSK)) ++ | (val & M_PRIOLVL_OVERRIDE_OVERRIDE_PRIOLVL_BMSK)), ++ M_PRIOLVL_OVERRIDE_ADDR(baddr, index)); ++ reg_val = readl_relaxed(M_RD_CMD_OVERRIDE_ADDR(baddr, index)) & ++ M_RD_CMD_OVERRIDE_RMSK; ++ val = val1 << M_RD_CMD_OVERRIDE_OVERRIDE_AREQPRIO_SHFT; ++ writel_relaxed(((reg_val & ~(M_RD_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK ++ )) | (val & M_RD_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK)), ++ M_RD_CMD_OVERRIDE_ADDR(baddr, index)); ++ reg_val = readl_relaxed(M_WR_CMD_OVERRIDE_ADDR(baddr, index)) & ++ M_WR_CMD_OVERRIDE_RMSK; ++ val = val2 << M_WR_CMD_OVERRIDE_OVERRIDE_AREQPRIO_SHFT; ++ writel_relaxed(((reg_val & ~(M_WR_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK ++ )) | (val & M_WR_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK)), ++ M_WR_CMD_OVERRIDE_ADDR(baddr, index)); ++ /* Ensure the priority register writes go through */ ++ wmb(); ++} ++ ++static void msm_bus_bimc_set_qos_mode(void __iomem *base, ++ uint32_t mas_index, uint8_t qmode_sel) ++{ ++ uint32_t reg_val, val; ++ ++ switch (qmode_sel) { ++ case BIMC_QOS_MODE_FIXED: ++ reg_val = readl_relaxed(M_BKE_EN_ADDR(base, ++ mas_index)); ++ writel_relaxed((reg_val & (~M_BKE_EN_EN_BMSK)), ++ M_BKE_EN_ADDR(base, mas_index)); ++ /* Ensure that the book-keeping register writes ++ * go through before setting QoS mode. ++ * QoS mode registers might write beyond 1K ++ * boundary in future ++ */ ++ wmb(); ++ set_qos_mode(base, mas_index, 1, 1, 1); ++ break; ++ ++ case BIMC_QOS_MODE_BYPASS: ++ reg_val = readl_relaxed(M_BKE_EN_ADDR(base, ++ mas_index)); ++ writel_relaxed((reg_val & (~M_BKE_EN_EN_BMSK)), ++ M_BKE_EN_ADDR(base, mas_index)); ++ /* Ensure that the book-keeping register writes ++ * go through before setting QoS mode. ++ * QoS mode registers might write beyond 1K ++ * boundary in future ++ */ ++ wmb(); ++ set_qos_mode(base, mas_index, 0, 0, 0); ++ break; ++ ++ case BIMC_QOS_MODE_REGULATOR: ++ case BIMC_QOS_MODE_LIMITER: ++ set_qos_mode(base, mas_index, 0, 0, 0); ++ reg_val = readl_relaxed(M_BKE_EN_ADDR(base, ++ mas_index)); ++ val = 1 << M_BKE_EN_EN_SHFT; ++ /* Ensure that the book-keeping register writes ++ * go through before setting QoS mode. ++ * QoS mode registers might write beyond 1K ++ * boundary in future ++ */ ++ wmb(); ++ writel_relaxed(((reg_val & (~M_BKE_EN_EN_BMSK)) | (val & ++ M_BKE_EN_EN_BMSK)), M_BKE_EN_ADDR(base, ++ mas_index)); ++ break; ++ default: ++ break; ++ } ++} ++ ++static void set_qos_prio_rl(void __iomem *addr, uint32_t rmsk, ++ uint8_t index, struct msm_bus_bimc_qos_mode *qmode) ++{ ++ uint32_t reg_val, val0, val; ++ ++ /* Note, addr is already passed with right mas_index */ ++ reg_val = readl_relaxed(addr) & rmsk; ++ val0 = BKE_HEALTH_VAL(qmode->rl.qhealth[index].limit_commands, ++ qmode->rl.qhealth[index].areq_prio, ++ qmode->rl.qhealth[index].prio_level); ++ val = ((reg_val & (~(BKE_HEALTH_MASK))) | (val0 & BKE_HEALTH_MASK)); ++ writel_relaxed(val, addr); ++ /* Ensure that priority for regulator/limiter modes are ++ * set before returning ++ */ ++ wmb(); ++ ++} ++ ++static void msm_bus_bimc_set_qos_prio(void __iomem *base, ++ uint32_t mas_index, uint8_t qmode_sel, ++ struct msm_bus_bimc_qos_mode *qmode) ++{ ++ uint32_t reg_val, val; ++ ++ switch (qmode_sel) { ++ case BIMC_QOS_MODE_FIXED: ++ reg_val = readl_relaxed(M_PRIOLVL_OVERRIDE_ADDR( ++ base, mas_index)) & M_PRIOLVL_OVERRIDE_RMSK; ++ val = qmode->fixed.prio_level << ++ M_PRIOLVL_OVERRIDE_SHFT; ++ writel_relaxed(((reg_val & ++ ~(M_PRIOLVL_OVERRIDE_BMSK)) | (val ++ & M_PRIOLVL_OVERRIDE_BMSK)), ++ M_PRIOLVL_OVERRIDE_ADDR(base, mas_index)); ++ ++ reg_val = readl_relaxed(M_RD_CMD_OVERRIDE_ADDR( ++ base, mas_index)) & M_RD_CMD_OVERRIDE_RMSK; ++ val = qmode->fixed.areq_prio_rd << ++ M_RD_CMD_OVERRIDE_AREQPRIO_SHFT; ++ writel_relaxed(((reg_val & ~(M_RD_CMD_OVERRIDE_AREQPRIO_BMSK)) ++ | (val & M_RD_CMD_OVERRIDE_AREQPRIO_BMSK)), ++ M_RD_CMD_OVERRIDE_ADDR(base, mas_index)); ++ ++ reg_val = readl_relaxed(M_WR_CMD_OVERRIDE_ADDR( ++ base, mas_index)) & M_WR_CMD_OVERRIDE_RMSK; ++ val = qmode->fixed.areq_prio_wr << ++ M_WR_CMD_OVERRIDE_AREQPRIO_SHFT; ++ writel_relaxed(((reg_val & ~(M_WR_CMD_OVERRIDE_AREQPRIO_BMSK)) ++ | (val & M_WR_CMD_OVERRIDE_AREQPRIO_BMSK)), ++ M_WR_CMD_OVERRIDE_ADDR(base, mas_index)); ++ /* Ensure that fixed mode register writes go through ++ * before returning ++ */ ++ wmb(); ++ break; ++ ++ case BIMC_QOS_MODE_REGULATOR: ++ case BIMC_QOS_MODE_LIMITER: ++ set_qos_prio_rl(M_BKE_HEALTH_3_CONFIG_ADDR(base, ++ mas_index), M_BKE_HEALTH_3_CONFIG_RMSK, 3, qmode); ++ set_qos_prio_rl(M_BKE_HEALTH_2_CONFIG_ADDR(base, ++ mas_index), M_BKE_HEALTH_2_CONFIG_RMSK, 2, qmode); ++ set_qos_prio_rl(M_BKE_HEALTH_1_CONFIG_ADDR(base, ++ mas_index), M_BKE_HEALTH_1_CONFIG_RMSK, 1, qmode); ++ set_qos_prio_rl(M_BKE_HEALTH_0_CONFIG_ADDR(base, ++ mas_index), M_BKE_HEALTH_0_CONFIG_RMSK, 0 , qmode); ++ break; ++ case BIMC_QOS_MODE_BYPASS: ++ default: ++ break; ++ } ++} ++ ++static void set_qos_bw_regs(void __iomem *baddr, uint32_t mas_index, ++ int32_t th, int32_t tm, int32_t tl, uint32_t gp, ++ uint32_t gc) ++{ ++ int32_t reg_val, val; ++ int32_t bke_reg_val; ++ int16_t val2; ++ ++ /* Disable BKE before writing to registers as per spec */ ++ bke_reg_val = readl_relaxed(M_BKE_EN_ADDR(baddr, mas_index)); ++ writel_relaxed((bke_reg_val & ~(M_BKE_EN_EN_BMSK)), ++ M_BKE_EN_ADDR(baddr, mas_index)); ++ ++ /* Write values of registers calculated */ ++ reg_val = readl_relaxed(M_BKE_GP_ADDR(baddr, mas_index)) ++ & M_BKE_GP_RMSK; ++ val = gp << M_BKE_GP_GP_SHFT; ++ writel_relaxed(((reg_val & ~(M_BKE_GP_GP_BMSK)) | (val & ++ M_BKE_GP_GP_BMSK)), M_BKE_GP_ADDR(baddr, mas_index)); ++ ++ reg_val = readl_relaxed(M_BKE_GC_ADDR(baddr, mas_index)) & ++ M_BKE_GC_RMSK; ++ val = gc << M_BKE_GC_GC_SHFT; ++ writel_relaxed(((reg_val & ~(M_BKE_GC_GC_BMSK)) | (val & ++ M_BKE_GC_GC_BMSK)), M_BKE_GC_ADDR(baddr, mas_index)); ++ ++ reg_val = readl_relaxed(M_BKE_THH_ADDR(baddr, mas_index)) & ++ M_BKE_THH_RMSK; ++ val = th << M_BKE_THH_THRESH_SHFT; ++ writel_relaxed(((reg_val & ~(M_BKE_THH_THRESH_BMSK)) | (val & ++ M_BKE_THH_THRESH_BMSK)), M_BKE_THH_ADDR(baddr, mas_index)); ++ ++ reg_val = readl_relaxed(M_BKE_THM_ADDR(baddr, mas_index)) & ++ M_BKE_THM_RMSK; ++ val2 = tm << M_BKE_THM_THRESH_SHFT; ++ writel_relaxed(((reg_val & ~(M_BKE_THM_THRESH_BMSK)) | (val2 & ++ M_BKE_THM_THRESH_BMSK)), M_BKE_THM_ADDR(baddr, mas_index)); ++ ++ reg_val = readl_relaxed(M_BKE_THL_ADDR(baddr, mas_index)) & ++ M_BKE_THL_RMSK; ++ val2 = tl << M_BKE_THL_THRESH_SHFT; ++ writel_relaxed(((reg_val & ~(M_BKE_THL_THRESH_BMSK)) | ++ (val2 & M_BKE_THL_THRESH_BMSK)), M_BKE_THL_ADDR(baddr, ++ mas_index)); ++ ++ /* Ensure that all bandwidth register writes have completed ++ * before returning ++ */ ++ wmb(); ++} ++ ++static void msm_bus_bimc_set_qos_bw(void __iomem *base, uint32_t qos_freq, ++ uint32_t mas_index, struct msm_bus_bimc_qos_bw *qbw) ++{ ++ uint32_t bke_en; ++ ++ /* Validate QOS Frequency */ ++ if (qos_freq == 0) { ++ MSM_BUS_DBG("Zero frequency\n"); ++ return; ++ } ++ ++ /* Get enable bit for BKE before programming the period */ ++ bke_en = (readl_relaxed(M_BKE_EN_ADDR(base, mas_index)) & ++ M_BKE_EN_EN_BMSK) >> M_BKE_EN_EN_SHFT; ++ ++ /* Only calculate if there's a requested bandwidth and window */ ++ if (qbw->bw && qbw->ws) { ++ int64_t th, tm, tl; ++ uint32_t gp, gc; ++ int64_t gp_nominal, gp_required, gp_calc, data, temp; ++ int64_t win = qbw->ws * qos_freq; ++ temp = win; ++ /* ++ * Calculate nominal grant period defined by requested ++ * window size. ++ * Ceil this value to max grant period. ++ */ ++ bimc_div(&temp, 1000000); ++ gp_nominal = min_t(uint64_t, MAX_GRANT_PERIOD, temp); ++ /* ++ * Calculate max window size, defined by bw request. ++ * Units: (KHz, MB/s) ++ */ ++ gp_calc = MAX_GC * qos_freq * 1000; ++ gp_required = gp_calc; ++ bimc_div(&gp_required, qbw->bw); ++ ++ /* User min of two grant periods */ ++ gp = min_t(int64_t, gp_nominal, gp_required); ++ ++ /* Calculate bandwith in grants and ceil. */ ++ temp = qbw->bw * gp; ++ data = qos_freq * 1000; ++ bimc_div(&temp, data); ++ gc = min_t(int64_t, MAX_GC, temp); ++ ++ /* Calculate thresholds */ ++ th = qbw->bw - qbw->thh; ++ tm = qbw->bw - qbw->thm; ++ tl = qbw->bw - qbw->thl; ++ ++ th = th * gp; ++ bimc_div(&th, data); ++ tm = tm * gp; ++ bimc_div(&tm, data); ++ tl = tl * gp; ++ bimc_div(&tl, data); ++ ++ MSM_BUS_DBG("BIMC: BW: mas_index: %d, th: %llu tm: %llu\n", ++ mas_index, th, tm); ++ MSM_BUS_DBG("BIMC: tl: %llu gp:%u gc: %u bke_en: %u\n", ++ tl, gp, gc, bke_en); ++ set_qos_bw_regs(base, mas_index, th, tm, tl, gp, gc); ++ } else ++ /* Clear bandwidth registers */ ++ set_qos_bw_regs(base, mas_index, 0, 0, 0, 0, 0); ++} ++ ++static int msm_bus_bimc_allocate_commit_data(struct msm_bus_fabric_registration ++ *fab_pdata, void **cdata, int ctx) ++{ ++ struct msm_bus_bimc_commit **cd = (struct msm_bus_bimc_commit **)cdata; ++ struct msm_bus_bimc_info *binfo = ++ (struct msm_bus_bimc_info *)fab_pdata->hw_data; ++ ++ MSM_BUS_DBG("Allocating BIMC commit data\n"); ++ *cd = kzalloc(sizeof(struct msm_bus_bimc_commit), GFP_KERNEL); ++ if (!*cd) { ++ MSM_BUS_DBG("Couldn't alloc mem for cdata\n"); ++ return -ENOMEM; ++ } ++ ++ (*cd)->mas = binfo->cdata[ctx].mas; ++ (*cd)->slv = binfo->cdata[ctx].slv; ++ ++ return 0; ++} ++ ++static void *msm_bus_bimc_allocate_bimc_data(struct platform_device *pdev, ++ struct msm_bus_fabric_registration *fab_pdata) ++{ ++ struct resource *bimc_mem; ++ struct resource *bimc_io; ++ struct msm_bus_bimc_info *binfo; ++ int i; ++ ++ MSM_BUS_DBG("Allocating BIMC data\n"); ++ binfo = kzalloc(sizeof(struct msm_bus_bimc_info), GFP_KERNEL); ++ if (!binfo) { ++ WARN(!binfo, "Couldn't alloc mem for bimc_info\n"); ++ return NULL; ++ } ++ ++ binfo->qos_freq = fab_pdata->qos_freq; ++ ++ binfo->params.nmasters = fab_pdata->nmasters; ++ binfo->params.nslaves = fab_pdata->nslaves; ++ binfo->params.bus_id = fab_pdata->id; ++ ++ for (i = 0; i < NUM_CTX; i++) { ++ binfo->cdata[i].mas = kzalloc(sizeof(struct ++ msm_bus_node_hw_info) * fab_pdata->nmasters * 2, ++ GFP_KERNEL); ++ if (!binfo->cdata[i].mas) { ++ MSM_BUS_ERR("Couldn't alloc mem for bimc master hw\n"); ++ kfree(binfo); ++ return NULL; ++ } ++ ++ binfo->cdata[i].slv = kzalloc(sizeof(struct ++ msm_bus_node_hw_info) * fab_pdata->nslaves * 2, ++ GFP_KERNEL); ++ if (!binfo->cdata[i].slv) { ++ MSM_BUS_DBG("Couldn't alloc mem for bimc slave hw\n"); ++ kfree(binfo->cdata[i].mas); ++ kfree(binfo); ++ return NULL; ++ } ++ } ++ ++ if (fab_pdata->virt) { ++ MSM_BUS_DBG("Don't get memory regions for virtual fabric\n"); ++ goto skip_mem; ++ } ++ ++ bimc_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!bimc_mem) { ++ MSM_BUS_ERR("Cannot get BIMC Base address\n"); ++ kfree(binfo); ++ return NULL; ++ } ++ ++ bimc_io = request_mem_region(bimc_mem->start, ++ resource_size(bimc_mem), pdev->name); ++ if (!bimc_io) { ++ MSM_BUS_ERR("BIMC memory unavailable\n"); ++ kfree(binfo); ++ return NULL; ++ } ++ ++ binfo->base = ioremap(bimc_mem->start, resource_size(bimc_mem)); ++ if (!binfo->base) { ++ MSM_BUS_ERR("IOremap failed for BIMC!\n"); ++ release_mem_region(bimc_mem->start, resource_size(bimc_mem)); ++ kfree(binfo); ++ return NULL; ++ } ++ ++skip_mem: ++ fab_pdata->hw_data = (void *)binfo; ++ return (void *)binfo; ++} ++ ++static void free_commit_data(void *cdata) ++{ ++ struct msm_bus_bimc_commit *cd = (struct msm_bus_bimc_commit *)cdata; ++ ++ kfree(cd->mas); ++ kfree(cd->slv); ++ kfree(cd); ++} ++ ++static void bke_switch( ++ void __iomem *baddr, uint32_t mas_index, bool req, int mode) ++{ ++ uint32_t reg_val, val, cur_val; ++ ++ val = req << M_BKE_EN_EN_SHFT; ++ reg_val = readl_relaxed(M_BKE_EN_ADDR(baddr, mas_index)); ++ cur_val = reg_val & M_BKE_EN_RMSK; ++ if (val == cur_val) ++ return; ++ ++ if (!req && mode == BIMC_QOS_MODE_FIXED) ++ set_qos_mode(baddr, mas_index, 1, 1, 1); ++ ++ writel_relaxed(((reg_val & ~(M_BKE_EN_EN_BMSK)) | (val & ++ M_BKE_EN_EN_BMSK)), M_BKE_EN_ADDR(baddr, mas_index)); ++ /* Make sure BKE on/off goes through before changing priorities */ ++ wmb(); ++ ++ if (req) ++ set_qos_mode(baddr, mas_index, 0, 0, 0); ++} ++ ++static void bimc_set_static_qos_bw(void __iomem *base, unsigned int qos_freq, ++ int mport, struct msm_bus_bimc_qos_bw *qbw) ++{ ++ int32_t bw_mbps, thh = 0, thm, thl, gc; ++ int32_t gp; ++ u64 temp; ++ ++ if (qos_freq == 0) { ++ MSM_BUS_DBG("No QoS Frequency.\n"); ++ return; ++ } ++ ++ if (!(qbw->bw && qbw->gp)) { ++ MSM_BUS_DBG("No QoS Bandwidth or Window size\n"); ++ return; ++ } ++ ++ /* Convert bandwidth to MBPS */ ++ temp = qbw->bw; ++ bimc_div(&temp, 1000000); ++ bw_mbps = temp; ++ ++ /* Grant period in clock cycles ++ * Grant period from bandwidth structure ++ * is in nano seconds, QoS freq is in KHz. ++ * Divide by 1000 to get clock cycles. ++ */ ++ gp = (qos_freq * qbw->gp) / (1000 * NSEC_PER_USEC); ++ ++ /* Grant count = BW in MBps * Grant period ++ * in micro seconds ++ */ ++ gc = bw_mbps * (qbw->gp / NSEC_PER_USEC); ++ gc = min(gc, MAX_GC); ++ ++ /* Medium threshold = -((Medium Threshold percentage * ++ * Grant count) / 100) ++ */ ++ thm = -((qbw->thmp * gc) / 100); ++ qbw->thm = thm; ++ ++ /* Low threshold = -(Grant count) */ ++ thl = -gc; ++ qbw->thl = thl; ++ ++ MSM_BUS_DBG("%s: BKE parameters: gp %d, gc %d, thm %d thl %d thh %d", ++ __func__, gp, gc, thm, thl, thh); ++ ++ trace_bus_bke_params(gc, gp, thl, thm, thl); ++ set_qos_bw_regs(base, mport, thh, thm, thl, gp, gc); ++} ++ ++static void msm_bus_bimc_config_master( ++ struct msm_bus_fabric_registration *fab_pdata, ++ struct msm_bus_inode_info *info, ++ uint64_t req_clk, uint64_t req_bw) ++{ ++ int mode, i, ports; ++ struct msm_bus_bimc_info *binfo; ++ uint64_t bw = 0; ++ ++ binfo = (struct msm_bus_bimc_info *)fab_pdata->hw_data; ++ ports = info->node_info->num_mports; ++ ++ /** ++ * Here check the details of dual configuration. ++ * Take actions based on different modes. ++ * Check for threshold if limiter mode, etc. ++ */ ++ ++ if (req_clk <= info->node_info->th[0]) { ++ mode = info->node_info->mode; ++ bw = info->node_info->bimc_bw[0]; ++ } else if ((info->node_info->num_thresh > 1) && ++ (req_clk <= info->node_info->th[1])) { ++ mode = info->node_info->mode; ++ bw = info->node_info->bimc_bw[1]; ++ } else ++ mode = info->node_info->mode_thresh; ++ ++ switch (mode) { ++ case BIMC_QOS_MODE_BYPASS: ++ case BIMC_QOS_MODE_FIXED: ++ for (i = 0; i < ports; i++) ++ bke_switch(binfo->base, info->node_info->qport[i], ++ BKE_OFF, mode); ++ break; ++ case BIMC_QOS_MODE_REGULATOR: ++ case BIMC_QOS_MODE_LIMITER: ++ for (i = 0; i < ports; i++) { ++ /* If not in fixed mode, update bandwidth */ ++ if ((info->node_info->cur_lim_bw != bw) ++ && (mode != BIMC_QOS_MODE_FIXED)) { ++ struct msm_bus_bimc_qos_bw qbw; ++ qbw.ws = info->node_info->ws; ++ qbw.bw = bw; ++ qbw.gp = info->node_info->bimc_gp; ++ qbw.thmp = info->node_info->bimc_thmp; ++ bimc_set_static_qos_bw(binfo->base, ++ binfo->qos_freq, ++ info->node_info->qport[i], &qbw); ++ info->node_info->cur_lim_bw = bw; ++ MSM_BUS_DBG("%s: Qos is %d reqclk %llu bw %llu", ++ __func__, mode, req_clk, bw); ++ } ++ bke_switch(binfo->base, info->node_info->qport[i], ++ BKE_ON, mode); ++ } ++ break; ++ default: ++ break; ++ } ++} ++ ++static void msm_bus_bimc_update_bw(struct msm_bus_inode_info *hop, ++ struct msm_bus_inode_info *info, ++ struct msm_bus_fabric_registration *fab_pdata, ++ void *sel_cdata, int *master_tiers, ++ int64_t add_bw) ++{ ++ struct msm_bus_bimc_info *binfo; ++ struct msm_bus_bimc_qos_bw qbw; ++ int i; ++ int64_t bw; ++ int ports = info->node_info->num_mports; ++ struct msm_bus_bimc_commit *sel_cd = ++ (struct msm_bus_bimc_commit *)sel_cdata; ++ ++ MSM_BUS_DBG("BIMC: Update bw for ID %d, with IID: %d: %lld\n", ++ info->node_info->id, info->node_info->priv_id, add_bw); ++ ++ binfo = (struct msm_bus_bimc_info *)fab_pdata->hw_data; ++ ++ if (info->node_info->num_mports == 0) { ++ MSM_BUS_DBG("BIMC: Skip Master BW\n"); ++ goto skip_mas_bw; ++ } ++ ++ ports = info->node_info->num_mports; ++ bw = INTERLEAVED_BW(fab_pdata, add_bw, ports); ++ ++ for (i = 0; i < ports; i++) { ++ sel_cd->mas[info->node_info->masterp[i]].bw += bw; ++ sel_cd->mas[info->node_info->masterp[i]].hw_id = ++ info->node_info->mas_hw_id; ++ MSM_BUS_DBG("BIMC: Update mas_bw for ID: %d -> %llu\n", ++ info->node_info->priv_id, ++ sel_cd->mas[info->node_info->masterp[i]].bw); ++ if (info->node_info->hw_sel == MSM_BUS_RPM) ++ sel_cd->mas[info->node_info->masterp[i]].dirty = 1; ++ else { ++ if (!info->node_info->qport) { ++ MSM_BUS_DBG("No qos ports to update!\n"); ++ break; ++ } ++ if (!(info->node_info->mode == BIMC_QOS_MODE_REGULATOR) ++ || (info->node_info->mode == ++ BIMC_QOS_MODE_LIMITER)) { ++ MSM_BUS_DBG("Skip QoS reg programming\n"); ++ break; ++ } ++ ++ MSM_BUS_DBG("qport: %d\n", info->node_info->qport[i]); ++ qbw.bw = sel_cd->mas[info->node_info->masterp[i]].bw; ++ qbw.ws = info->node_info->ws; ++ /* Threshold low = 90% of bw */ ++ qbw.thl = div_s64((90 * bw), 100); ++ /* Threshold medium = bw */ ++ qbw.thm = bw; ++ /* Threshold high = 10% more than bw */ ++ qbw.thh = div_s64((110 * bw), 100); ++ /* Check if info is a shared master. ++ * If it is, mark it dirty ++ * If it isn't, then set QOS Bandwidth. ++ * Also if dual-conf is set, don't program bw regs. ++ **/ ++ if (!info->node_info->dual_conf && ++ ((info->node_info->mode == BIMC_QOS_MODE_LIMITER) || ++ (info->node_info->mode == BIMC_QOS_MODE_REGULATOR))) ++ msm_bus_bimc_set_qos_bw(binfo->base, ++ binfo->qos_freq, ++ info->node_info->qport[i], &qbw); ++ } ++ } ++ ++skip_mas_bw: ++ ports = hop->node_info->num_sports; ++ MSM_BUS_DBG("BIMC: ID: %d, Sports: %d\n", hop->node_info->priv_id, ++ ports); ++ ++ for (i = 0; i < ports; i++) { ++ sel_cd->slv[hop->node_info->slavep[i]].bw += add_bw; ++ sel_cd->slv[hop->node_info->slavep[i]].hw_id = ++ hop->node_info->slv_hw_id; ++ MSM_BUS_DBG("BIMC: Update slave_bw: ID: %d -> %llu\n", ++ hop->node_info->priv_id, ++ sel_cd->slv[hop->node_info->slavep[i]].bw); ++ MSM_BUS_DBG("BIMC: Update slave_bw: index: %d\n", ++ hop->node_info->slavep[i]); ++ /* Check if hop is a shared slave. ++ * If it is, mark it dirty ++ * If it isn't, then nothing to be done as the ++ * slaves are in bypass mode. ++ **/ ++ if (hop->node_info->hw_sel == MSM_BUS_RPM) { ++ MSM_BUS_DBG("Slave dirty: %d, slavep: %d\n", ++ hop->node_info->priv_id, ++ hop->node_info->slavep[i]); ++ sel_cd->slv[hop->node_info->slavep[i]].dirty = 1; ++ } ++ } ++} ++ ++static int msm_bus_bimc_commit(struct msm_bus_fabric_registration ++ *fab_pdata, void *hw_data, void **cdata) ++{ ++ MSM_BUS_DBG("\nReached BIMC Commit\n"); ++ msm_bus_remote_hw_commit(fab_pdata, hw_data, cdata); ++ return 0; ++} ++ ++static void msm_bus_bimc_config_limiter( ++ struct msm_bus_fabric_registration *fab_pdata, ++ struct msm_bus_inode_info *info) ++{ ++ struct msm_bus_bimc_info *binfo; ++ int mode, i, ports; ++ ++ binfo = (struct msm_bus_bimc_info *)fab_pdata->hw_data; ++ ports = info->node_info->num_mports; ++ ++ if (!info->node_info->qport) { ++ MSM_BUS_DBG("No QoS Ports to init\n"); ++ return; ++ } ++ ++ if (info->cur_lim_bw) ++ mode = BIMC_QOS_MODE_LIMITER; ++ else ++ mode = info->node_info->mode; ++ ++ switch (mode) { ++ case BIMC_QOS_MODE_BYPASS: ++ case BIMC_QOS_MODE_FIXED: ++ for (i = 0; i < ports; i++) ++ bke_switch(binfo->base, info->node_info->qport[i], ++ BKE_OFF, mode); ++ break; ++ case BIMC_QOS_MODE_REGULATOR: ++ case BIMC_QOS_MODE_LIMITER: ++ if (info->cur_lim_bw != info->cur_prg_bw) { ++ MSM_BUS_DBG("Enabled BKE throttling node %d to %llu\n", ++ info->node_info->id, info->cur_lim_bw); ++ trace_bus_bimc_config_limiter(info->node_info->id, ++ info->cur_lim_bw); ++ for (i = 0; i < ports; i++) { ++ /* If not in fixed mode, update bandwidth */ ++ struct msm_bus_bimc_qos_bw qbw; ++ ++ qbw.ws = info->node_info->ws; ++ qbw.bw = info->cur_lim_bw; ++ qbw.gp = info->node_info->bimc_gp; ++ qbw.thmp = info->node_info->bimc_thmp; ++ bimc_set_static_qos_bw(binfo->base, ++ binfo->qos_freq, ++ info->node_info->qport[i], &qbw); ++ bke_switch(binfo->base, ++ info->node_info->qport[i], ++ BKE_ON, mode); ++ info->cur_prg_bw = qbw.bw; ++ } ++ } ++ break; ++ default: ++ break; ++ } ++} ++ ++static void bimc_init_mas_reg(struct msm_bus_bimc_info *binfo, ++ struct msm_bus_inode_info *info, ++ struct msm_bus_bimc_qos_mode *qmode, int mode) ++{ ++ int i; ++ ++ switch (mode) { ++ case BIMC_QOS_MODE_FIXED: ++ qmode->fixed.prio_level = info->node_info->prio_lvl; ++ qmode->fixed.areq_prio_rd = info->node_info->prio_rd; ++ qmode->fixed.areq_prio_wr = info->node_info->prio_wr; ++ break; ++ case BIMC_QOS_MODE_LIMITER: ++ qmode->rl.qhealth[0].limit_commands = 1; ++ qmode->rl.qhealth[1].limit_commands = 0; ++ qmode->rl.qhealth[2].limit_commands = 0; ++ qmode->rl.qhealth[3].limit_commands = 0; ++ break; ++ default: ++ break; ++ } ++ ++ if (!info->node_info->qport) { ++ MSM_BUS_DBG("No QoS Ports to init\n"); ++ return; ++ } ++ ++ for (i = 0; i < info->node_info->num_mports; i++) { ++ /* If not in bypass mode, update priority */ ++ if (mode != BIMC_QOS_MODE_BYPASS) { ++ msm_bus_bimc_set_qos_prio(binfo->base, ++ info->node_info-> ++ qport[i], mode, qmode); ++ ++ /* If not in fixed mode, update bandwidth */ ++ if (mode != BIMC_QOS_MODE_FIXED) { ++ struct msm_bus_bimc_qos_bw qbw; ++ qbw.ws = info->node_info->ws; ++ qbw.bw = info->node_info->bimc_bw[0]; ++ qbw.gp = info->node_info->bimc_gp; ++ qbw.thmp = info->node_info->bimc_thmp; ++ bimc_set_static_qos_bw(binfo->base, ++ binfo->qos_freq, ++ info->node_info->qport[i], &qbw); ++ } ++ } ++ ++ /* set mode */ ++ msm_bus_bimc_set_qos_mode(binfo->base, ++ info->node_info->qport[i], ++ mode); ++ } ++} ++ ++static void init_health_regs(struct msm_bus_bimc_info *binfo, ++ struct msm_bus_inode_info *info, ++ struct msm_bus_bimc_qos_mode *qmode, ++ int mode) ++{ ++ int i; ++ ++ if (mode == BIMC_QOS_MODE_LIMITER) { ++ qmode->rl.qhealth[0].limit_commands = 1; ++ qmode->rl.qhealth[1].limit_commands = 0; ++ qmode->rl.qhealth[2].limit_commands = 0; ++ qmode->rl.qhealth[3].limit_commands = 0; ++ ++ if (!info->node_info->qport) { ++ MSM_BUS_DBG("No QoS Ports to init\n"); ++ return; ++ } ++ ++ for (i = 0; i < info->node_info->num_mports; i++) { ++ /* If not in bypass mode, update priority */ ++ if (mode != BIMC_QOS_MODE_BYPASS) ++ msm_bus_bimc_set_qos_prio(binfo->base, ++ info->node_info->qport[i], mode, qmode); ++ } ++ } ++} ++ ++ ++static int msm_bus_bimc_mas_init(struct msm_bus_bimc_info *binfo, ++ struct msm_bus_inode_info *info) ++{ ++ struct msm_bus_bimc_qos_mode *qmode; ++ qmode = kzalloc(sizeof(struct msm_bus_bimc_qos_mode), ++ GFP_KERNEL); ++ if (!qmode) { ++ MSM_BUS_WARN("Couldn't alloc prio data for node: %d\n", ++ info->node_info->id); ++ return -ENOMEM; ++ } ++ ++ info->hw_data = (void *)qmode; ++ ++ /** ++ * If the master supports dual configuration, ++ * configure registers for both modes ++ */ ++ if (info->node_info->dual_conf) ++ bimc_init_mas_reg(binfo, info, qmode, ++ info->node_info->mode_thresh); ++ else if (info->node_info->nr_lim) ++ init_health_regs(binfo, info, qmode, BIMC_QOS_MODE_LIMITER); ++ ++ bimc_init_mas_reg(binfo, info, qmode, info->node_info->mode); ++ return 0; ++} ++ ++static void msm_bus_bimc_node_init(void *hw_data, ++ struct msm_bus_inode_info *info) ++{ ++ struct msm_bus_bimc_info *binfo = ++ (struct msm_bus_bimc_info *)hw_data; ++ ++ if (!IS_SLAVE(info->node_info->priv_id) && ++ (info->node_info->hw_sel != MSM_BUS_RPM)) ++ msm_bus_bimc_mas_init(binfo, info); ++} ++ ++static int msm_bus_bimc_port_halt(uint32_t haltid, uint8_t mport) ++{ ++ return 0; ++} ++ ++static int msm_bus_bimc_port_unhalt(uint32_t haltid, uint8_t mport) ++{ ++ return 0; ++} ++ ++static int msm_bus_bimc_limit_mport(struct msm_bus_node_device_type *info, ++ void __iomem *qos_base, uint32_t qos_off, ++ uint32_t qos_delta, uint32_t qos_freq, ++ bool enable_lim, u64 lim_bw) ++{ ++ int mode; ++ int i; ++ ++ if (ZERO_OR_NULL_PTR(info->node_info->qport)) { ++ MSM_BUS_DBG("No QoS Ports to limit\n"); ++ return 0; ++ } ++ ++ if (enable_lim && lim_bw) { ++ mode = BIMC_QOS_MODE_LIMITER; ++ ++ if (!info->node_info->lim_bw) { ++ struct msm_bus_bimc_qos_mode qmode; ++ qmode.rl.qhealth[0].limit_commands = 1; ++ qmode.rl.qhealth[1].limit_commands = 0; ++ qmode.rl.qhealth[2].limit_commands = 0; ++ qmode.rl.qhealth[3].limit_commands = 0; ++ ++ for (i = 0; i < info->node_info->num_qports; i++) { ++ /* If not in bypass mode, update priority */ ++ if (mode != BIMC_QOS_MODE_BYPASS) ++ msm_bus_bimc_set_qos_prio(qos_base, ++ info->node_info->qport[i], mode, ++ &qmode); ++ } ++ } ++ ++ for (i = 0; i < info->node_info->num_qports; i++) { ++ struct msm_bus_bimc_qos_bw qbw; ++ /* If not in fixed mode, update bandwidth */ ++ if ((info->node_info->lim_bw != lim_bw)) { ++ qbw.ws = info->node_info->qos_params.ws; ++ qbw.bw = lim_bw; ++ qbw.gp = info->node_info->qos_params.gp; ++ qbw.thmp = info->node_info->qos_params.thmp; ++ bimc_set_static_qos_bw(qos_base, qos_freq, ++ info->node_info->qport[i], &qbw); ++ } ++ bke_switch(qos_base, info->node_info->qport[i], ++ BKE_ON, mode); ++ } ++ info->node_info->lim_bw = lim_bw; ++ } else { ++ mode = info->node_info->qos_params.mode; ++ for (i = 0; i < info->node_info->num_qports; i++) { ++ bke_switch(qos_base, info->node_info->qport[i], ++ BKE_OFF, mode); ++ } ++ } ++ info->node_info->qos_params.cur_mode = mode; ++ return 0; ++} ++ ++static bool msm_bus_bimc_update_bw_reg(int mode) ++{ ++ bool ret = false; ++ ++ if ((mode == BIMC_QOS_MODE_LIMITER) ++ || (mode == BIMC_QOS_MODE_REGULATOR)) ++ ret = true; ++ ++ return ret; ++} ++ ++static int msm_bus_bimc_qos_init(struct msm_bus_node_device_type *info, ++ void __iomem *qos_base, ++ uint32_t qos_off, uint32_t qos_delta, ++ uint32_t qos_freq) ++{ ++ int i; ++ struct msm_bus_bimc_qos_mode qmode; ++ ++ switch (info->node_info->qos_params.mode) { ++ case BIMC_QOS_MODE_FIXED: ++ qmode.fixed.prio_level = info->node_info->qos_params.prio_lvl; ++ qmode.fixed.areq_prio_rd = info->node_info->qos_params.prio_rd; ++ qmode.fixed.areq_prio_wr = info->node_info->qos_params.prio_wr; ++ break; ++ case BIMC_QOS_MODE_LIMITER: ++ qmode.rl.qhealth[0].limit_commands = 1; ++ qmode.rl.qhealth[1].limit_commands = 0; ++ qmode.rl.qhealth[2].limit_commands = 0; ++ qmode.rl.qhealth[3].limit_commands = 0; ++ break; ++ default: ++ break; ++ } ++ ++ if (ZERO_OR_NULL_PTR(info->node_info->qport)) { ++ MSM_BUS_DBG("No QoS Ports to init\n"); ++ return 0; ++ } ++ ++ for (i = 0; i < info->node_info->num_qports; i++) { ++ /* If not in bypass mode, update priority */ ++ if (info->node_info->qos_params.mode != BIMC_QOS_MODE_BYPASS) ++ msm_bus_bimc_set_qos_prio(qos_base, info->node_info-> ++ qport[i], info->node_info->qos_params.mode, ++ &qmode); ++ ++ /* set mode */ ++ if (info->node_info->qos_params.mode == BIMC_QOS_MODE_LIMITER) ++ bke_switch(qos_base, info->node_info->qport[i], ++ BKE_OFF, BIMC_QOS_MODE_FIXED); ++ else ++ msm_bus_bimc_set_qos_mode(qos_base, ++ info->node_info->qport[i], ++ info->node_info->qos_params.mode); ++ } ++ ++ return 0; ++} ++ ++static int msm_bus_bimc_set_bw(struct msm_bus_node_device_type *dev, ++ void __iomem *qos_base, uint32_t qos_off, ++ uint32_t qos_delta, uint32_t qos_freq) ++{ ++ struct msm_bus_bimc_qos_bw qbw; ++ int i; ++ int64_t bw = 0; ++ int ret = 0; ++ struct msm_bus_node_info_type *info = dev->node_info; ++ ++ if (info && info->num_qports && ++ ((info->qos_params.mode == BIMC_QOS_MODE_LIMITER) || ++ (info->qos_params.mode == BIMC_QOS_MODE_REGULATOR))) { ++ bw = msm_bus_div64(info->num_qports, ++ dev->node_ab.ab[DUAL_CTX]); ++ ++ for (i = 0; i < info->num_qports; i++) { ++ MSM_BUS_DBG("BIMC: Update mas_bw for ID: %d -> %llu\n", ++ info->id, bw); ++ ++ if (!info->qport) { ++ MSM_BUS_DBG("No qos ports to update!\n"); ++ break; ++ } ++ ++ qbw.bw = bw + info->qos_params.bw_buffer; ++ trace_bus_bimc_config_limiter(info->id, bw); ++ ++ /* Default to gp of 5us */ ++ qbw.gp = (info->qos_params.gp ? ++ info->qos_params.gp : 5000); ++ /* Default to thmp of 50% */ ++ qbw.thmp = (info->qos_params.thmp ? ++ info->qos_params.thmp : 50); ++ /* ++ * If the BW vote is 0 then set the QoS mode to ++ * Fixed. ++ */ ++ if (bw) { ++ bimc_set_static_qos_bw(qos_base, qos_freq, ++ info->qport[i], &qbw); ++ bke_switch(qos_base, info->qport[i], ++ BKE_ON, info->qos_params.mode); ++ } else { ++ bke_switch(qos_base, info->qport[i], ++ BKE_OFF, BIMC_QOS_MODE_FIXED); ++ } ++ } ++ } ++ return ret; ++} ++ ++int msm_bus_bimc_hw_init(struct msm_bus_fabric_registration *pdata, ++ struct msm_bus_hw_algorithm *hw_algo) ++{ ++ /* Set interleaving to true by default */ ++ MSM_BUS_DBG("\nInitializing BIMC...\n"); ++ pdata->il_flag = true; ++ hw_algo->allocate_commit_data = msm_bus_bimc_allocate_commit_data; ++ hw_algo->allocate_hw_data = msm_bus_bimc_allocate_bimc_data; ++ hw_algo->node_init = msm_bus_bimc_node_init; ++ hw_algo->free_commit_data = free_commit_data; ++ hw_algo->update_bw = msm_bus_bimc_update_bw; ++ hw_algo->commit = msm_bus_bimc_commit; ++ hw_algo->port_halt = msm_bus_bimc_port_halt; ++ hw_algo->port_unhalt = msm_bus_bimc_port_unhalt; ++ hw_algo->config_master = msm_bus_bimc_config_master; ++ hw_algo->config_limiter = msm_bus_bimc_config_limiter; ++ hw_algo->update_bw_reg = msm_bus_bimc_update_bw_reg; ++ /* BIMC slaves are shared. Slave registers are set through RPM */ ++ if (!pdata->ahb) ++ pdata->rpm_enabled = 1; ++ return 0; ++} ++ ++int msm_bus_bimc_set_ops(struct msm_bus_node_device_type *bus_dev) ++{ ++ if (!bus_dev) ++ return -ENODEV; ++ else { ++ bus_dev->fabdev->noc_ops.qos_init = msm_bus_bimc_qos_init; ++ bus_dev->fabdev->noc_ops.set_bw = msm_bus_bimc_set_bw; ++ bus_dev->fabdev->noc_ops.limit_mport = msm_bus_bimc_limit_mport; ++ bus_dev->fabdev->noc_ops.update_bw_reg = ++ msm_bus_bimc_update_bw_reg; ++ } ++ return 0; ++} ++EXPORT_SYMBOL(msm_bus_bimc_set_ops); +--- /dev/null ++++ b/drivers/bus/msm_bus/msm_bus_bimc.h +@@ -0,0 +1,127 @@ ++/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#ifndef _ARCH_ARM_MACH_MSM_BUS_BIMC_H ++#define _ARCH_ARM_MACH_MSM_BUS_BIMC_H ++ ++struct msm_bus_bimc_params { ++ uint32_t bus_id; ++ uint32_t addr_width; ++ uint32_t data_width; ++ uint32_t nmasters; ++ uint32_t nslaves; ++}; ++ ++struct msm_bus_bimc_commit { ++ struct msm_bus_node_hw_info *mas; ++ struct msm_bus_node_hw_info *slv; ++}; ++ ++struct msm_bus_bimc_info { ++ void __iomem *base; ++ uint32_t base_addr; ++ uint32_t qos_freq; ++ struct msm_bus_bimc_params params; ++ struct msm_bus_bimc_commit cdata[NUM_CTX]; ++}; ++ ++struct msm_bus_bimc_node { ++ uint32_t conn_mask; ++ uint32_t data_width; ++ uint8_t slv_arb_mode; ++}; ++ ++enum msm_bus_bimc_arb_mode { ++ BIMC_ARB_MODE_RR = 0, ++ BIMC_ARB_MODE_PRIORITY_RR, ++ BIMC_ARB_MODE_TIERED_RR, ++}; ++ ++ ++enum msm_bus_bimc_interleave { ++ BIMC_INTERLEAVE_NONE = 0, ++ BIMC_INTERLEAVE_ODD, ++ BIMC_INTERLEAVE_EVEN, ++}; ++ ++struct msm_bus_bimc_slave_seg { ++ bool enable; ++ uint64_t start_addr; ++ uint64_t seg_size; ++ uint8_t interleave; ++}; ++ ++enum msm_bus_bimc_qos_mode_type { ++ BIMC_QOS_MODE_FIXED = 0, ++ BIMC_QOS_MODE_LIMITER, ++ BIMC_QOS_MODE_BYPASS, ++ BIMC_QOS_MODE_REGULATOR, ++}; ++ ++struct msm_bus_bimc_qos_health { ++ bool limit_commands; ++ uint32_t areq_prio; ++ uint32_t prio_level; ++}; ++ ++struct msm_bus_bimc_mode_fixed { ++ uint32_t prio_level; ++ uint32_t areq_prio_rd; ++ uint32_t areq_prio_wr; ++}; ++ ++struct msm_bus_bimc_mode_rl { ++ uint8_t qhealthnum; ++ struct msm_bus_bimc_qos_health qhealth[4]; ++}; ++ ++struct msm_bus_bimc_qos_mode { ++ uint8_t mode; ++ struct msm_bus_bimc_mode_fixed fixed; ++ struct msm_bus_bimc_mode_rl rl; ++}; ++ ++struct msm_bus_bimc_qos_bw { ++ uint64_t bw; /* bw is in Bytes/sec */ ++ uint32_t ws; /* Window size in nano seconds*/ ++ int64_t thh; /* Threshold high, bytes per second */ ++ int64_t thm; /* Threshold medium, bytes per second */ ++ int64_t thl; /* Threshold low, bytes per second */ ++ u32 gp; /* Grant Period in micro seconds */ ++ u32 thmp; /* Threshold medium in percentage */ ++}; ++ ++struct msm_bus_bimc_clk_gate { ++ bool core_clk_gate_en; ++ bool arb_clk_gate_en; /* For arbiter */ ++ bool port_clk_gate_en; /* For regs on BIMC core clock */ ++}; ++ ++void msm_bus_bimc_set_slave_seg(struct msm_bus_bimc_info *binfo, ++ uint32_t slv_index, uint32_t seg_index, ++ struct msm_bus_bimc_slave_seg *bsseg); ++void msm_bus_bimc_set_slave_clk_gate(struct msm_bus_bimc_info *binfo, ++ uint32_t slv_index, struct msm_bus_bimc_clk_gate *bgate); ++void msm_bus_bimc_set_mas_clk_gate(struct msm_bus_bimc_info *binfo, ++ uint32_t mas_index, struct msm_bus_bimc_clk_gate *bgate); ++void msm_bus_bimc_arb_en(struct msm_bus_bimc_info *binfo, ++ uint32_t slv_index, bool en); ++void msm_bus_bimc_get_params(struct msm_bus_bimc_info *binfo, ++ struct msm_bus_bimc_params *params); ++void msm_bus_bimc_get_mas_params(struct msm_bus_bimc_info *binfo, ++ uint32_t mas_index, struct msm_bus_bimc_node *mparams); ++void msm_bus_bimc_get_slv_params(struct msm_bus_bimc_info *binfo, ++ uint32_t slv_index, struct msm_bus_bimc_node *sparams); ++bool msm_bus_bimc_get_arb_en(struct msm_bus_bimc_info *binfo, ++ uint32_t slv_index); ++ ++#endif /*_ARCH_ARM_MACH_MSM_BUS_BIMC_H*/ +--- /dev/null ++++ b/drivers/bus/msm_bus/msm_bus_client_api.c +@@ -0,0 +1,83 @@ ++/* Copyright (c) 2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#define pr_fmt(fmt) "AXI: %s(): " fmt, __func__ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include "msm-bus.h" ++#include "msm_bus_core.h" ++ ++struct msm_bus_arb_ops arb_ops; ++ ++/** ++ * msm_bus_scale_register_client() - Register the clients with the msm bus ++ * driver ++ * @pdata: Platform data of the client, containing src, dest, ab, ib. ++ * Return non-zero value in case of success, 0 in case of failure. ++ * ++ * Client data contains the vectors specifying arbitrated bandwidth (ab) ++ * and instantaneous bandwidth (ib) requested between a particular ++ * src and dest. ++ */ ++uint32_t msm_bus_scale_register_client(struct msm_bus_scale_pdata *pdata) ++{ ++ if (arb_ops.register_client) ++ return arb_ops.register_client(pdata); ++ else { ++ pr_err("%s: Bus driver not ready.", ++ __func__); ++ return 0; ++ } ++} ++EXPORT_SYMBOL(msm_bus_scale_register_client); ++ ++/** ++ * msm_bus_scale_client_update_request() - Update the request for bandwidth ++ * from a particular client ++ * ++ * cl: Handle to the client ++ * index: Index into the vector, to which the bw and clock values need to be ++ * updated ++ */ ++int msm_bus_scale_client_update_request(uint32_t cl, unsigned int index) ++{ ++ if (arb_ops.update_request) ++ return arb_ops.update_request(cl, index); ++ else { ++ pr_err("%s: Bus driver not ready.", ++ __func__); ++ return -EPROBE_DEFER; ++ } ++} ++EXPORT_SYMBOL(msm_bus_scale_client_update_request); ++ ++/** ++ * msm_bus_scale_unregister_client() - Unregister the client from the bus driver ++ * @cl: Handle to the client ++ */ ++void msm_bus_scale_unregister_client(uint32_t cl) ++{ ++ if (arb_ops.unregister_client) ++ arb_ops.unregister_client(cl); ++ else { ++ pr_err("%s: Bus driver not ready.", ++ __func__); ++ } ++} ++EXPORT_SYMBOL(msm_bus_scale_unregister_client); +--- /dev/null ++++ b/drivers/bus/msm_bus/msm_bus_core.c +@@ -0,0 +1,125 @@ ++/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#define pr_fmt(fmt) "AXI: %s(): " fmt, __func__ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include "msm-bus-board.h" ++#include "msm-bus.h" ++#include "msm_bus_core.h" ++ ++static atomic_t num_fab = ATOMIC_INIT(0); ++ ++int msm_bus_get_num_fab(void) ++{ ++ return atomic_read(&num_fab); ++} ++ ++int msm_bus_device_match(struct device *dev, void *id) ++{ ++ struct msm_bus_fabric_device *fabdev = to_msm_bus_fabric_device(dev); ++ ++ if (!fabdev) { ++ MSM_BUS_WARN("Fabric %p returning 0\n", fabdev); ++ return 0; ++ } ++ return fabdev->id == *(int *)id; ++} ++ ++static void msm_bus_release(struct device *device) ++{ ++} ++ ++struct bus_type msm_bus_type = { ++ .name = "msm-bus-type", ++}; ++EXPORT_SYMBOL(msm_bus_type); ++ ++/** ++ * msm_bus_get_fabric_device() - This function is used to search for ++ * the fabric device on the bus ++ * @fabid: Fabric id ++ * Function returns: Pointer to the fabric device ++ */ ++struct msm_bus_fabric_device *msm_bus_get_fabric_device(int fabid) ++{ ++ struct device *dev; ++ struct msm_bus_fabric_device *fabric; ++ dev = bus_find_device(&msm_bus_type, NULL, (void *)&fabid, ++ msm_bus_device_match); ++ if (!dev) ++ return NULL; ++ fabric = to_msm_bus_fabric_device(dev); ++ return fabric; ++} ++ ++/** ++ * msm_bus_fabric_device_register() - Registers a fabric on msm bus ++ * @fabdev: Fabric device to be registered ++ */ ++int msm_bus_fabric_device_register(struct msm_bus_fabric_device *fabdev) ++{ ++ int ret = 0; ++ fabdev->dev.bus = &msm_bus_type; ++ fabdev->dev.release = msm_bus_release; ++ ret = dev_set_name(&fabdev->dev, fabdev->name); ++ if (ret) { ++ MSM_BUS_ERR("error setting dev name\n"); ++ goto err; ++ } ++ ++ ret = device_register(&fabdev->dev); ++ if (ret < 0) { ++ MSM_BUS_ERR("error registering device%d %s\n", ++ ret, fabdev->name); ++ goto err; ++ } ++ atomic_inc(&num_fab); ++err: ++ return ret; ++} ++ ++/** ++ * msm_bus_fabric_device_unregister() - Unregisters the fabric ++ * devices from the msm bus ++ */ ++void msm_bus_fabric_device_unregister(struct msm_bus_fabric_device *fabdev) ++{ ++ device_unregister(&fabdev->dev); ++ atomic_dec(&num_fab); ++} ++ ++static void __exit msm_bus_exit(void) ++{ ++ bus_unregister(&msm_bus_type); ++} ++ ++static int __init msm_bus_init(void) ++{ ++ int retval = 0; ++ retval = bus_register(&msm_bus_type); ++ if (retval) ++ MSM_BUS_ERR("bus_register error! %d\n", ++ retval); ++ return retval; ++} ++postcore_initcall(msm_bus_init); ++module_exit(msm_bus_exit); ++MODULE_LICENSE("GPL v2"); ++MODULE_VERSION("0.2"); ++MODULE_ALIAS("platform:msm_bus"); +--- /dev/null ++++ b/drivers/bus/msm_bus/msm_bus_core.h +@@ -0,0 +1,375 @@ ++/* Copyright (c) 2011-2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#ifndef _ARCH_ARM_MACH_MSM_BUS_CORE_H ++#define _ARCH_ARM_MACH_MSM_BUS_CORE_H ++ ++#include ++#include ++#include ++#include ++#include "msm-bus-board.h" ++#include "msm-bus.h" ++ ++#define MSM_BUS_DBG(msg, ...) \ ++ pr_debug(msg, ## __VA_ARGS__) ++#define MSM_BUS_ERR(msg, ...) \ ++ pr_err(msg, ## __VA_ARGS__) ++#define MSM_BUS_WARN(msg, ...) \ ++ pr_warn(msg, ## __VA_ARGS__) ++#define MSM_FAB_ERR(msg, ...) \ ++ dev_err(&fabric->fabdev.dev, msg, ## __VA_ARGS__) ++ ++#define IS_MASTER_VALID(mas) \ ++ (((mas >= MSM_BUS_MASTER_FIRST) && (mas <= MSM_BUS_MASTER_LAST)) \ ++ ? 1 : 0) ++#define IS_SLAVE_VALID(slv) \ ++ (((slv >= MSM_BUS_SLAVE_FIRST) && (slv <= MSM_BUS_SLAVE_LAST)) ? 1 : 0) ++ ++#define INTERLEAVED_BW(fab_pdata, bw, ports) \ ++ ((fab_pdata->il_flag) ? ((bw < 0) \ ++ ? -msm_bus_div64((ports), (-bw)) : msm_bus_div64((ports), (bw))) : (bw)) ++#define INTERLEAVED_VAL(fab_pdata, n) \ ++ ((fab_pdata->il_flag) ? (n) : 1) ++#define KBTOB(a) (a * 1000ULL) ++ ++enum msm_bus_dbg_op_type { ++ MSM_BUS_DBG_UNREGISTER = -2, ++ MSM_BUS_DBG_REGISTER, ++ MSM_BUS_DBG_OP = 1, ++}; ++ ++enum msm_bus_hw_sel { ++ MSM_BUS_RPM = 0, ++ MSM_BUS_NOC, ++ MSM_BUS_BIMC, ++}; ++ ++struct msm_bus_arb_ops { ++ uint32_t (*register_client)(struct msm_bus_scale_pdata *pdata); ++ int (*update_request)(uint32_t cl, unsigned int index); ++ void (*unregister_client)(uint32_t cl); ++}; ++ ++enum { ++ SLAVE_NODE, ++ MASTER_NODE, ++ CLK_NODE, ++ NR_LIM_NODE, ++}; ++ ++ ++extern struct bus_type msm_bus_type; ++extern struct msm_bus_arb_ops arb_ops; ++extern void msm_bus_arb_setops_legacy(struct msm_bus_arb_ops *arb_ops); ++ ++struct msm_bus_node_info { ++ unsigned int id; ++ unsigned int priv_id; ++ unsigned int mas_hw_id; ++ unsigned int slv_hw_id; ++ int gateway; ++ int *masterp; ++ int *qport; ++ int num_mports; ++ int *slavep; ++ int num_sports; ++ int *tier; ++ int num_tiers; ++ int ahb; ++ int hw_sel; ++ const char *slaveclk[NUM_CTX]; ++ const char *memclk[NUM_CTX]; ++ const char *iface_clk_node; ++ unsigned int buswidth; ++ unsigned int ws; ++ unsigned int mode; ++ unsigned int perm_mode; ++ unsigned int prio_lvl; ++ unsigned int prio_rd; ++ unsigned int prio_wr; ++ unsigned int prio1; ++ unsigned int prio0; ++ unsigned int num_thresh; ++ u64 *th; ++ u64 cur_lim_bw; ++ unsigned int mode_thresh; ++ bool dual_conf; ++ u64 *bimc_bw; ++ bool nr_lim; ++ u32 ff; ++ bool rt_mas; ++ u32 bimc_gp; ++ u32 bimc_thmp; ++ u64 floor_bw; ++ const char *name; ++}; ++ ++struct path_node { ++ uint64_t clk[NUM_CTX]; ++ uint64_t bw[NUM_CTX]; ++ uint64_t *sel_clk; ++ uint64_t *sel_bw; ++ int next; ++}; ++ ++struct msm_bus_link_info { ++ uint64_t clk[NUM_CTX]; ++ uint64_t *sel_clk; ++ uint64_t memclk; ++ int64_t bw[NUM_CTX]; ++ int64_t *sel_bw; ++ int *tier; ++ int num_tiers; ++}; ++ ++struct nodeclk { ++ struct clk *clk; ++ uint64_t rate; ++ bool dirty; ++ bool enable; ++}; ++ ++struct msm_bus_inode_info { ++ struct msm_bus_node_info *node_info; ++ uint64_t max_bw; ++ uint64_t max_clk; ++ uint64_t cur_lim_bw; ++ uint64_t cur_prg_bw; ++ struct msm_bus_link_info link_info; ++ int num_pnodes; ++ struct path_node *pnode; ++ int commit_index; ++ struct nodeclk nodeclk[NUM_CTX]; ++ struct nodeclk memclk[NUM_CTX]; ++ struct nodeclk iface_clk; ++ void *hw_data; ++}; ++ ++struct msm_bus_node_hw_info { ++ bool dirty; ++ unsigned int hw_id; ++ uint64_t bw; ++}; ++ ++struct msm_bus_hw_algorithm { ++ int (*allocate_commit_data)(struct msm_bus_fabric_registration ++ *fab_pdata, void **cdata, int ctx); ++ void *(*allocate_hw_data)(struct platform_device *pdev, ++ struct msm_bus_fabric_registration *fab_pdata); ++ void (*node_init)(void *hw_data, struct msm_bus_inode_info *info); ++ void (*free_commit_data)(void *cdata); ++ void (*update_bw)(struct msm_bus_inode_info *hop, ++ struct msm_bus_inode_info *info, ++ struct msm_bus_fabric_registration *fab_pdata, ++ void *sel_cdata, int *master_tiers, ++ int64_t add_bw); ++ void (*fill_cdata_buffer)(int *curr, char *buf, const int max_size, ++ void *cdata, int nmasters, int nslaves, int ntslaves); ++ int (*commit)(struct msm_bus_fabric_registration ++ *fab_pdata, void *hw_data, void **cdata); ++ int (*port_unhalt)(uint32_t haltid, uint8_t mport); ++ int (*port_halt)(uint32_t haltid, uint8_t mport); ++ void (*config_master)(struct msm_bus_fabric_registration *fab_pdata, ++ struct msm_bus_inode_info *info, ++ uint64_t req_clk, uint64_t req_bw); ++ void (*config_limiter)(struct msm_bus_fabric_registration *fab_pdata, ++ struct msm_bus_inode_info *info); ++ bool (*update_bw_reg)(int mode); ++}; ++ ++struct msm_bus_fabric_device { ++ int id; ++ const char *name; ++ struct device dev; ++ const struct msm_bus_fab_algorithm *algo; ++ const struct msm_bus_board_algorithm *board_algo; ++ struct msm_bus_hw_algorithm hw_algo; ++ int visited; ++ int num_nr_lim; ++ u64 nr_lim_thresh; ++ u32 eff_fact; ++}; ++#define to_msm_bus_fabric_device(d) container_of(d, \ ++ struct msm_bus_fabric_device, d) ++ ++struct msm_bus_fabric { ++ struct msm_bus_fabric_device fabdev; ++ int ahb; ++ void *cdata[NUM_CTX]; ++ bool arb_dirty; ++ bool clk_dirty; ++ struct radix_tree_root fab_tree; ++ int num_nodes; ++ struct list_head gateways; ++ struct msm_bus_inode_info info; ++ struct msm_bus_fabric_registration *pdata; ++ void *hw_data; ++}; ++#define to_msm_bus_fabric(d) container_of(d, \ ++ struct msm_bus_fabric, d) ++ ++ ++struct msm_bus_fab_algorithm { ++ int (*update_clks)(struct msm_bus_fabric_device *fabdev, ++ struct msm_bus_inode_info *pme, int index, ++ uint64_t curr_clk, uint64_t req_clk, ++ uint64_t bwsum, int flag, int ctx, ++ unsigned int cl_active_flag); ++ int (*port_halt)(struct msm_bus_fabric_device *fabdev, int portid); ++ int (*port_unhalt)(struct msm_bus_fabric_device *fabdev, int portid); ++ int (*commit)(struct msm_bus_fabric_device *fabdev); ++ struct msm_bus_inode_info *(*find_node)(struct msm_bus_fabric_device ++ *fabdev, int id); ++ struct msm_bus_inode_info *(*find_gw_node)(struct msm_bus_fabric_device ++ *fabdev, int id); ++ struct list_head *(*get_gw_list)(struct msm_bus_fabric_device *fabdev); ++ void (*update_bw)(struct msm_bus_fabric_device *fabdev, struct ++ msm_bus_inode_info * hop, struct msm_bus_inode_info *info, ++ int64_t add_bw, int *master_tiers, int ctx); ++ void (*config_master)(struct msm_bus_fabric_device *fabdev, ++ struct msm_bus_inode_info *info, uint64_t req_clk, ++ uint64_t req_bw); ++ void (*config_limiter)(struct msm_bus_fabric_device *fabdev, ++ struct msm_bus_inode_info *info); ++}; ++ ++struct msm_bus_board_algorithm { ++ int board_nfab; ++ void (*assign_iids)(struct msm_bus_fabric_registration *fabreg, ++ int fabid); ++ int (*get_iid)(int id); ++}; ++ ++/** ++ * Used to store the list of fabrics and other info to be ++ * maintained outside the fabric structure. ++ * Used while calculating path, and to find fabric ptrs ++ */ ++struct msm_bus_fabnodeinfo { ++ struct list_head list; ++ struct msm_bus_inode_info *info; ++}; ++ ++struct msm_bus_client { ++ int id; ++ struct msm_bus_scale_pdata *pdata; ++ int *src_pnode; ++ int curr; ++}; ++ ++uint64_t msm_bus_div64(unsigned int width, uint64_t bw); ++int msm_bus_fabric_device_register(struct msm_bus_fabric_device *fabric); ++void msm_bus_fabric_device_unregister(struct msm_bus_fabric_device *fabric); ++struct msm_bus_fabric_device *msm_bus_get_fabric_device(int fabid); ++int msm_bus_get_num_fab(void); ++ ++ ++int msm_bus_hw_fab_init(struct msm_bus_fabric_registration *pdata, ++ struct msm_bus_hw_algorithm *hw_algo); ++void msm_bus_board_init(struct msm_bus_fabric_registration *pdata); ++void msm_bus_board_set_nfab(struct msm_bus_fabric_registration *pdata, ++ int nfab); ++#if defined(CONFIG_MSM_RPM_SMD) ++int msm_bus_rpm_hw_init(struct msm_bus_fabric_registration *pdata, ++ struct msm_bus_hw_algorithm *hw_algo); ++int msm_bus_remote_hw_commit(struct msm_bus_fabric_registration ++ *fab_pdata, void *hw_data, void **cdata); ++void msm_bus_rpm_fill_cdata_buffer(int *curr, char *buf, const int max_size, ++ void *cdata, int nmasters, int nslaves, int ntslaves); ++#else ++static inline int msm_bus_rpm_hw_init(struct msm_bus_fabric_registration *pdata, ++ struct msm_bus_hw_algorithm *hw_algo) ++{ ++ return 0; ++} ++static inline int msm_bus_remote_hw_commit(struct msm_bus_fabric_registration ++ *fab_pdata, void *hw_data, void **cdata) ++{ ++ return 0; ++} ++static inline void msm_bus_rpm_fill_cdata_buffer(int *curr, char *buf, ++ const int max_size, void *cdata, int nmasters, int nslaves, ++ int ntslaves) ++{ ++} ++#endif ++ ++int msm_bus_noc_hw_init(struct msm_bus_fabric_registration *pdata, ++ struct msm_bus_hw_algorithm *hw_algo); ++int msm_bus_bimc_hw_init(struct msm_bus_fabric_registration *pdata, ++ struct msm_bus_hw_algorithm *hw_algo); ++#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_MSM_BUS_SCALING) ++void msm_bus_dbg_client_data(struct msm_bus_scale_pdata *pdata, int index, ++ uint32_t cl); ++void msm_bus_dbg_commit_data(const char *fabname, void *cdata, ++ int nmasters, int nslaves, int ntslaves, int op); ++#else ++static inline void msm_bus_dbg_client_data(struct msm_bus_scale_pdata *pdata, ++ int index, uint32_t cl) ++{ ++} ++static inline void msm_bus_dbg_commit_data(const char *fabname, ++ void *cdata, int nmasters, int nslaves, int ntslaves, ++ int op) ++{ ++} ++#endif ++ ++#ifdef CONFIG_CORESIGHT ++int msmbus_coresight_init(struct platform_device *pdev); ++void msmbus_coresight_remove(struct platform_device *pdev); ++int msmbus_coresight_init_adhoc(struct platform_device *pdev, ++ struct device_node *of_node); ++void msmbus_coresight_remove_adhoc(struct platform_device *pdev); ++#else ++static inline int msmbus_coresight_init(struct platform_device *pdev) ++{ ++ return 0; ++} ++ ++static inline void msmbus_coresight_remove(struct platform_device *pdev) ++{ ++} ++ ++static inline int msmbus_coresight_init_adhoc(struct platform_device *pdev, ++ struct device_node *of_node) ++{ ++ return 0; ++} ++ ++static inline void msmbus_coresight_remove_adhoc(struct platform_device *pdev) ++{ ++} ++#endif ++ ++ ++#ifdef CONFIG_OF ++void msm_bus_of_get_nfab(struct platform_device *pdev, ++ struct msm_bus_fabric_registration *pdata); ++struct msm_bus_fabric_registration ++ *msm_bus_of_get_fab_data(struct platform_device *pdev); ++#else ++static inline void msm_bus_of_get_nfab(struct platform_device *pdev, ++ struct msm_bus_fabric_registration *pdata) ++{ ++ return; ++} ++ ++static inline struct msm_bus_fabric_registration ++ *msm_bus_of_get_fab_data(struct platform_device *pdev) ++{ ++ return NULL; ++} ++#endif ++ ++#endif /*_ARCH_ARM_MACH_MSM_BUS_CORE_H*/ +--- /dev/null ++++ b/drivers/bus/msm_bus/msm_bus_dbg.c +@@ -0,0 +1,810 @@ ++/* Copyright (c) 2010-2012, 2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ */ ++ ++#define pr_fmt(fmt) "AXI: %s(): " fmt, __func__ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include "msm-bus-board.h" ++#include "msm-bus.h" ++#include "msm_bus_rules.h" ++#include "msm_bus_core.h" ++#include "msm_bus_adhoc.h" ++ ++#define CREATE_TRACE_POINTS ++#include ++ ++#define MAX_BUFF_SIZE 4096 ++#define FILL_LIMIT 128 ++ ++static struct dentry *clients; ++static struct dentry *dir; ++static DEFINE_MUTEX(msm_bus_dbg_fablist_lock); ++struct msm_bus_dbg_state { ++ uint32_t cl; ++ uint8_t enable; ++ uint8_t current_index; ++} clstate; ++ ++struct msm_bus_cldata { ++ const struct msm_bus_scale_pdata *pdata; ++ int index; ++ uint32_t clid; ++ int size; ++ struct dentry *file; ++ struct list_head list; ++ char buffer[MAX_BUFF_SIZE]; ++}; ++ ++struct msm_bus_fab_list { ++ const char *name; ++ int size; ++ struct dentry *file; ++ struct list_head list; ++ char buffer[MAX_BUFF_SIZE]; ++}; ++ ++static char *rules_buf; ++ ++LIST_HEAD(fabdata_list); ++LIST_HEAD(cl_list); ++ ++/** ++ * The following structures and funtions are used for ++ * the test-client which can be created at run-time. ++ */ ++ ++static struct msm_bus_vectors init_vectors[1]; ++static struct msm_bus_vectors current_vectors[1]; ++static struct msm_bus_vectors requested_vectors[1]; ++ ++static struct msm_bus_paths shell_client_usecases[] = { ++ { ++ .num_paths = ARRAY_SIZE(init_vectors), ++ .vectors = init_vectors, ++ }, ++ { ++ .num_paths = ARRAY_SIZE(current_vectors), ++ .vectors = current_vectors, ++ }, ++ { ++ .num_paths = ARRAY_SIZE(requested_vectors), ++ .vectors = requested_vectors, ++ }, ++}; ++ ++static struct msm_bus_scale_pdata shell_client = { ++ .usecase = shell_client_usecases, ++ .num_usecases = ARRAY_SIZE(shell_client_usecases), ++ .name = "test-client", ++}; ++ ++static void msm_bus_dbg_init_vectors(void) ++{ ++ init_vectors[0].src = -1; ++ init_vectors[0].dst = -1; ++ init_vectors[0].ab = 0; ++ init_vectors[0].ib = 0; ++ current_vectors[0].src = -1; ++ current_vectors[0].dst = -1; ++ current_vectors[0].ab = 0; ++ current_vectors[0].ib = 0; ++ requested_vectors[0].src = -1; ++ requested_vectors[0].dst = -1; ++ requested_vectors[0].ab = 0; ++ requested_vectors[0].ib = 0; ++ clstate.enable = 0; ++ clstate.current_index = 0; ++} ++ ++static int msm_bus_dbg_update_cl_request(uint32_t cl) ++{ ++ int ret = 0; ++ ++ if (clstate.current_index < 2) ++ clstate.current_index = 2; ++ else { ++ clstate.current_index = 1; ++ current_vectors[0].ab = requested_vectors[0].ab; ++ current_vectors[0].ib = requested_vectors[0].ib; ++ } ++ ++ if (clstate.enable) { ++ MSM_BUS_DBG("Updating request for shell client, index: %d\n", ++ clstate.current_index); ++ ret = msm_bus_scale_client_update_request(clstate.cl, ++ clstate.current_index); ++ } else ++ MSM_BUS_DBG("Enable bit not set. Skipping update request\n"); ++ ++ return ret; ++} ++ ++static void msm_bus_dbg_unregister_client(uint32_t cl) ++{ ++ MSM_BUS_DBG("Unregistering shell client\n"); ++ msm_bus_scale_unregister_client(clstate.cl); ++ clstate.cl = 0; ++} ++ ++static uint32_t msm_bus_dbg_register_client(void) ++{ ++ int ret = 0; ++ ++ if (init_vectors[0].src != requested_vectors[0].src) { ++ MSM_BUS_DBG("Shell client master changed. Unregistering\n"); ++ msm_bus_dbg_unregister_client(clstate.cl); ++ } ++ if (init_vectors[0].dst != requested_vectors[0].dst) { ++ MSM_BUS_DBG("Shell client slave changed. Unregistering\n"); ++ msm_bus_dbg_unregister_client(clstate.cl); ++ } ++ ++ current_vectors[0].src = init_vectors[0].src; ++ requested_vectors[0].src = init_vectors[0].src; ++ current_vectors[0].dst = init_vectors[0].dst; ++ requested_vectors[0].dst = init_vectors[0].dst; ++ ++ if (!clstate.enable) { ++ MSM_BUS_DBG("Enable bit not set, skipping registration: cl " ++ "%d\n", clstate.cl); ++ return 0; ++ } ++ ++ if (clstate.cl) { ++ MSM_BUS_DBG("Client registered, skipping registration\n"); ++ return clstate.cl; ++ } ++ ++ MSM_BUS_DBG("Registering shell client\n"); ++ ret = msm_bus_scale_register_client(&shell_client); ++ return ret; ++} ++ ++static int msm_bus_dbg_mas_get(void *data, u64 *val) ++{ ++ *val = init_vectors[0].src; ++ MSM_BUS_DBG("Get master: %llu\n", *val); ++ return 0; ++} ++ ++static int msm_bus_dbg_mas_set(void *data, u64 val) ++{ ++ init_vectors[0].src = val; ++ MSM_BUS_DBG("Set master: %llu\n", val); ++ clstate.cl = msm_bus_dbg_register_client(); ++ return 0; ++} ++DEFINE_SIMPLE_ATTRIBUTE(shell_client_mas_fops, msm_bus_dbg_mas_get, ++ msm_bus_dbg_mas_set, "%llu\n"); ++ ++static int msm_bus_dbg_slv_get(void *data, u64 *val) ++{ ++ *val = init_vectors[0].dst; ++ MSM_BUS_DBG("Get slave: %llu\n", *val); ++ return 0; ++} ++ ++static int msm_bus_dbg_slv_set(void *data, u64 val) ++{ ++ init_vectors[0].dst = val; ++ MSM_BUS_DBG("Set slave: %llu\n", val); ++ clstate.cl = msm_bus_dbg_register_client(); ++ return 0; ++} ++DEFINE_SIMPLE_ATTRIBUTE(shell_client_slv_fops, msm_bus_dbg_slv_get, ++ msm_bus_dbg_slv_set, "%llu\n"); ++ ++static int msm_bus_dbg_ab_get(void *data, u64 *val) ++{ ++ *val = requested_vectors[0].ab; ++ MSM_BUS_DBG("Get ab: %llu\n", *val); ++ return 0; ++} ++ ++static int msm_bus_dbg_ab_set(void *data, u64 val) ++{ ++ requested_vectors[0].ab = val; ++ MSM_BUS_DBG("Set ab: %llu\n", val); ++ return 0; ++} ++DEFINE_SIMPLE_ATTRIBUTE(shell_client_ab_fops, msm_bus_dbg_ab_get, ++ msm_bus_dbg_ab_set, "%llu\n"); ++ ++static int msm_bus_dbg_ib_get(void *data, u64 *val) ++{ ++ *val = requested_vectors[0].ib; ++ MSM_BUS_DBG("Get ib: %llu\n", *val); ++ return 0; ++} ++ ++static int msm_bus_dbg_ib_set(void *data, u64 val) ++{ ++ requested_vectors[0].ib = val; ++ MSM_BUS_DBG("Set ib: %llu\n", val); ++ return 0; ++} ++DEFINE_SIMPLE_ATTRIBUTE(shell_client_ib_fops, msm_bus_dbg_ib_get, ++ msm_bus_dbg_ib_set, "%llu\n"); ++ ++static int msm_bus_dbg_en_get(void *data, u64 *val) ++{ ++ *val = clstate.enable; ++ MSM_BUS_DBG("Get enable: %llu\n", *val); ++ return 0; ++} ++ ++static int msm_bus_dbg_en_set(void *data, u64 val) ++{ ++ int ret = 0; ++ ++ clstate.enable = val; ++ if (clstate.enable) { ++ if (!clstate.cl) { ++ MSM_BUS_DBG("client: %u\n", clstate.cl); ++ clstate.cl = msm_bus_dbg_register_client(); ++ if (clstate.cl) ++ ret = msm_bus_dbg_update_cl_request(clstate.cl); ++ } else { ++ MSM_BUS_DBG("update request for cl: %u\n", clstate.cl); ++ ret = msm_bus_dbg_update_cl_request(clstate.cl); ++ } ++ } ++ ++ MSM_BUS_DBG("Set enable: %llu\n", val); ++ return ret; ++} ++DEFINE_SIMPLE_ATTRIBUTE(shell_client_en_fops, msm_bus_dbg_en_get, ++ msm_bus_dbg_en_set, "%llu\n"); ++ ++/** ++ * The following funtions are used for viewing the client data ++ * and changing the client request at run-time ++ */ ++ ++static ssize_t client_data_read(struct file *file, char __user *buf, ++ size_t count, loff_t *ppos) ++{ ++ int bsize = 0; ++ uint32_t cl = (uint32_t)(uintptr_t)file->private_data; ++ struct msm_bus_cldata *cldata = NULL; ++ int found = 0; ++ ++ list_for_each_entry(cldata, &cl_list, list) { ++ if (cldata->clid == cl) { ++ found = 1; ++ break; ++ } ++ } ++ if (!found) ++ return 0; ++ ++ bsize = cldata->size; ++ return simple_read_from_buffer(buf, count, ppos, ++ cldata->buffer, bsize); ++} ++ ++static int client_data_open(struct inode *inode, struct file *file) ++{ ++ file->private_data = inode->i_private; ++ return 0; ++} ++ ++static const struct file_operations client_data_fops = { ++ .open = client_data_open, ++ .read = client_data_read, ++}; ++ ++struct dentry *msm_bus_dbg_create(const char *name, mode_t mode, ++ struct dentry *dent, uint32_t clid) ++{ ++ if (dent == NULL) { ++ MSM_BUS_DBG("debugfs not ready yet\n"); ++ return NULL; ++ } ++ return debugfs_create_file(name, mode, dent, (void *)(uintptr_t)clid, ++ &client_data_fops); ++} ++ ++#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_MSM_BUS_SCALING) ++static int msm_bus_dbg_record_client(const struct msm_bus_scale_pdata *pdata, ++ int index, uint32_t clid, struct dentry *file) ++{ ++ struct msm_bus_cldata *cldata; ++ ++ cldata = kmalloc(sizeof(struct msm_bus_cldata), GFP_KERNEL); ++ if (!cldata) { ++ MSM_BUS_DBG("Failed to allocate memory for client data\n"); ++ return -ENOMEM; ++ } ++ cldata->pdata = pdata; ++ cldata->index = index; ++ cldata->clid = clid; ++ cldata->file = file; ++ cldata->size = 0; ++ list_add_tail(&cldata->list, &cl_list); ++ return 0; ++} ++ ++static void msm_bus_dbg_free_client(uint32_t clid) ++{ ++ struct msm_bus_cldata *cldata = NULL; ++ ++ list_for_each_entry(cldata, &cl_list, list) { ++ if (cldata->clid == clid) { ++ debugfs_remove(cldata->file); ++ list_del(&cldata->list); ++ kfree(cldata); ++ break; ++ } ++ } ++} ++ ++static int msm_bus_dbg_fill_cl_buffer(const struct msm_bus_scale_pdata *pdata, ++ int index, uint32_t clid) ++{ ++ int i = 0, j; ++ char *buf = NULL; ++ struct msm_bus_cldata *cldata = NULL; ++ struct timespec ts; ++ int found = 0; ++ ++ list_for_each_entry(cldata, &cl_list, list) { ++ if (cldata->clid == clid) { ++ found = 1; ++ break; ++ } ++ } ++ ++ if (!found) ++ return -ENOENT; ++ ++ if (cldata->file == NULL) { ++ if (pdata->name == NULL) { ++ MSM_BUS_DBG("Client doesn't have a name\n"); ++ return -EINVAL; ++ } ++ cldata->file = msm_bus_dbg_create(pdata->name, S_IRUGO, ++ clients, clid); ++ } ++ ++ if (cldata->size < (MAX_BUFF_SIZE - FILL_LIMIT)) ++ i = cldata->size; ++ else { ++ i = 0; ++ cldata->size = 0; ++ } ++ buf = cldata->buffer; ++ ts = ktime_to_timespec(ktime_get()); ++ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\n%d.%d\n", ++ (int)ts.tv_sec, (int)ts.tv_nsec); ++ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "curr : %d\n", index); ++ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "masters: "); ++ ++ for (j = 0; j < pdata->usecase->num_paths; j++) ++ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "%d ", ++ pdata->usecase[index].vectors[j].src); ++ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\nslaves : "); ++ for (j = 0; j < pdata->usecase->num_paths; j++) ++ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "%d ", ++ pdata->usecase[index].vectors[j].dst); ++ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\nab : "); ++ for (j = 0; j < pdata->usecase->num_paths; j++) ++ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "%llu ", ++ pdata->usecase[index].vectors[j].ab); ++ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\nib : "); ++ for (j = 0; j < pdata->usecase->num_paths; j++) ++ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "%llu ", ++ pdata->usecase[index].vectors[j].ib); ++ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\n"); ++ ++ for (j = 0; j < pdata->usecase->num_paths; j++) ++ trace_bus_update_request((int)ts.tv_sec, (int)ts.tv_nsec, ++ pdata->name, index, ++ pdata->usecase[index].vectors[j].src, ++ pdata->usecase[index].vectors[j].dst, ++ pdata->usecase[index].vectors[j].ab, ++ pdata->usecase[index].vectors[j].ib); ++ ++ cldata->size = i; ++ return i; ++} ++#endif ++ ++static int msm_bus_dbg_update_request(struct msm_bus_cldata *cldata, int index) ++{ ++ int ret = 0; ++ ++ if ((index < 0) || (index > cldata->pdata->num_usecases)) { ++ MSM_BUS_DBG("Invalid index!\n"); ++ return -EINVAL; ++ } ++ ret = msm_bus_scale_client_update_request(cldata->clid, index); ++ return ret; ++} ++ ++static ssize_t msm_bus_dbg_update_request_write(struct file *file, ++ const char __user *ubuf, size_t cnt, loff_t *ppos) ++{ ++ struct msm_bus_cldata *cldata; ++ unsigned long index = 0; ++ int ret = 0; ++ char *chid; ++ char *buf = kmalloc((sizeof(char) * (cnt + 1)), GFP_KERNEL); ++ int found = 0; ++ ++ if (!buf || IS_ERR(buf)) { ++ MSM_BUS_ERR("Memory allocation for buffer failed\n"); ++ return -ENOMEM; ++ } ++ if (cnt == 0) { ++ kfree(buf); ++ return 0; ++ } ++ if (copy_from_user(buf, ubuf, cnt)) { ++ kfree(buf); ++ return -EFAULT; ++ } ++ buf[cnt] = '\0'; ++ chid = buf; ++ MSM_BUS_DBG("buffer: %s\n size: %zu\n", buf, sizeof(ubuf)); ++ ++ list_for_each_entry(cldata, &cl_list, list) { ++ if (strnstr(chid, cldata->pdata->name, cnt)) { ++ found = 1; ++ cldata = cldata; ++ strsep(&chid, " "); ++ if (chid) { ++ ret = kstrtoul(chid, 10, &index); ++ if (ret) { ++ MSM_BUS_DBG("Index conversion" ++ " failed\n"); ++ return -EFAULT; ++ } ++ } else { ++ MSM_BUS_DBG("Error parsing input. Index not" ++ " found\n"); ++ found = 0; ++ } ++ break; ++ } ++ } ++ ++ if (found) ++ msm_bus_dbg_update_request(cldata, index); ++ kfree(buf); ++ return cnt; ++} ++ ++/** ++ * The following funtions are used for viewing the commit data ++ * for each fabric ++ */ ++static ssize_t fabric_data_read(struct file *file, char __user *buf, ++ size_t count, loff_t *ppos) ++{ ++ struct msm_bus_fab_list *fablist = NULL; ++ int bsize = 0; ++ ssize_t ret; ++ const char *name = file->private_data; ++ int found = 0; ++ ++ mutex_lock(&msm_bus_dbg_fablist_lock); ++ list_for_each_entry(fablist, &fabdata_list, list) { ++ if (strcmp(fablist->name, name) == 0) { ++ found = 1; ++ break; ++ } ++ } ++ if (!found) ++ return -ENOENT; ++ bsize = fablist->size; ++ ret = simple_read_from_buffer(buf, count, ppos, ++ fablist->buffer, bsize); ++ mutex_unlock(&msm_bus_dbg_fablist_lock); ++ return ret; ++} ++ ++static const struct file_operations fabric_data_fops = { ++ .open = client_data_open, ++ .read = fabric_data_read, ++}; ++ ++static ssize_t rules_dbg_read(struct file *file, char __user *buf, ++ size_t count, loff_t *ppos) ++{ ++ ssize_t ret; ++ memset(rules_buf, 0, MAX_BUFF_SIZE); ++ print_rules_buf(rules_buf, MAX_BUFF_SIZE); ++ ret = simple_read_from_buffer(buf, count, ppos, ++ rules_buf, MAX_BUFF_SIZE); ++ return ret; ++} ++ ++static int rules_dbg_open(struct inode *inode, struct file *file) ++{ ++ file->private_data = inode->i_private; ++ return 0; ++} ++ ++static const struct file_operations rules_dbg_fops = { ++ .open = rules_dbg_open, ++ .read = rules_dbg_read, ++}; ++ ++#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_MSM_BUS_SCALING) ++static int msm_bus_dbg_record_fabric(const char *fabname, struct dentry *file) ++{ ++ struct msm_bus_fab_list *fablist; ++ int ret = 0; ++ ++ mutex_lock(&msm_bus_dbg_fablist_lock); ++ fablist = kmalloc(sizeof(struct msm_bus_fab_list), GFP_KERNEL); ++ if (!fablist) { ++ MSM_BUS_DBG("Failed to allocate memory for commit data\n"); ++ ret = -ENOMEM; ++ goto err; ++ } ++ ++ fablist->name = fabname; ++ fablist->size = 0; ++ list_add_tail(&fablist->list, &fabdata_list); ++err: ++ mutex_unlock(&msm_bus_dbg_fablist_lock); ++ return ret; ++} ++ ++static void msm_bus_dbg_free_fabric(const char *fabname) ++{ ++ struct msm_bus_fab_list *fablist = NULL; ++ ++ mutex_lock(&msm_bus_dbg_fablist_lock); ++ list_for_each_entry(fablist, &fabdata_list, list) { ++ if (strcmp(fablist->name, fabname) == 0) { ++ debugfs_remove(fablist->file); ++ list_del(&fablist->list); ++ kfree(fablist); ++ break; ++ } ++ } ++ mutex_unlock(&msm_bus_dbg_fablist_lock); ++} ++ ++static int msm_bus_dbg_fill_fab_buffer(const char *fabname, ++ void *cdata, int nmasters, int nslaves, ++ int ntslaves) ++{ ++ int i; ++ char *buf = NULL; ++ struct msm_bus_fab_list *fablist = NULL; ++ struct timespec ts; ++ int found = 0; ++ ++ mutex_lock(&msm_bus_dbg_fablist_lock); ++ list_for_each_entry(fablist, &fabdata_list, list) { ++ if (strcmp(fablist->name, fabname) == 0) { ++ found = 1; ++ break; ++ } ++ } ++ if (!found) ++ return -ENOENT; ++ ++ if (fablist->file == NULL) { ++ MSM_BUS_DBG("Fabric dbg entry does not exist\n"); ++ mutex_unlock(&msm_bus_dbg_fablist_lock); ++ return -EFAULT; ++ } ++ ++ if (fablist->size < MAX_BUFF_SIZE - 256) ++ i = fablist->size; ++ else { ++ i = 0; ++ fablist->size = 0; ++ } ++ buf = fablist->buffer; ++ mutex_unlock(&msm_bus_dbg_fablist_lock); ++ ts = ktime_to_timespec(ktime_get()); ++ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\n%d.%d\n", ++ (int)ts.tv_sec, (int)ts.tv_nsec); ++ ++ msm_bus_rpm_fill_cdata_buffer(&i, buf, MAX_BUFF_SIZE, cdata, ++ nmasters, nslaves, ntslaves); ++ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\n"); ++ mutex_lock(&msm_bus_dbg_fablist_lock); ++ fablist->size = i; ++ mutex_unlock(&msm_bus_dbg_fablist_lock); ++ return 0; ++} ++#endif ++ ++static const struct file_operations msm_bus_dbg_update_request_fops = { ++ .open = client_data_open, ++ .write = msm_bus_dbg_update_request_write, ++}; ++ ++#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_MSM_BUS_SCALING) ++/** ++ * msm_bus_dbg_client_data() - Add debug data for clients ++ * @pdata: Platform data of the client ++ * @index: The current index or operation to be performed ++ * @clid: Client handle obtained during registration ++ */ ++void msm_bus_dbg_client_data(struct msm_bus_scale_pdata *pdata, int index, ++ uint32_t clid) ++{ ++ struct dentry *file = NULL; ++ ++ if (index == MSM_BUS_DBG_REGISTER) { ++ msm_bus_dbg_record_client(pdata, index, clid, file); ++ if (!pdata->name) { ++ MSM_BUS_DBG("Cannot create debugfs entry. Null name\n"); ++ return; ++ } ++ } else if (index == MSM_BUS_DBG_UNREGISTER) { ++ msm_bus_dbg_free_client(clid); ++ MSM_BUS_DBG("Client %d unregistered\n", clid); ++ } else ++ msm_bus_dbg_fill_cl_buffer(pdata, index, clid); ++} ++EXPORT_SYMBOL(msm_bus_dbg_client_data); ++ ++/** ++ * msm_bus_dbg_commit_data() - Add commit data from fabrics ++ * @fabname: Fabric name specified in platform data ++ * @cdata: Commit Data ++ * @nmasters: Number of masters attached to fabric ++ * @nslaves: Number of slaves attached to fabric ++ * @ntslaves: Number of tiered slaves attached to fabric ++ * @op: Operation to be performed ++ */ ++void msm_bus_dbg_commit_data(const char *fabname, void *cdata, ++ int nmasters, int nslaves, int ntslaves, int op) ++{ ++ struct dentry *file = NULL; ++ ++ if (op == MSM_BUS_DBG_REGISTER) ++ msm_bus_dbg_record_fabric(fabname, file); ++ else if (op == MSM_BUS_DBG_UNREGISTER) ++ msm_bus_dbg_free_fabric(fabname); ++ else ++ msm_bus_dbg_fill_fab_buffer(fabname, cdata, nmasters, ++ nslaves, ntslaves); ++} ++EXPORT_SYMBOL(msm_bus_dbg_commit_data); ++#endif ++ ++static int __init msm_bus_debugfs_init(void) ++{ ++ struct dentry *commit, *shell_client, *rules_dbg; ++ struct msm_bus_fab_list *fablist; ++ struct msm_bus_cldata *cldata = NULL; ++ uint64_t val = 0; ++ ++ dir = debugfs_create_dir("msm-bus-dbg", NULL); ++ if ((!dir) || IS_ERR(dir)) { ++ MSM_BUS_ERR("Couldn't create msm-bus-dbg\n"); ++ goto err; ++ } ++ ++ clients = debugfs_create_dir("client-data", dir); ++ if ((!dir) || IS_ERR(dir)) { ++ MSM_BUS_ERR("Couldn't create clients\n"); ++ goto err; ++ } ++ ++ shell_client = debugfs_create_dir("shell-client", dir); ++ if ((!dir) || IS_ERR(dir)) { ++ MSM_BUS_ERR("Couldn't create clients\n"); ++ goto err; ++ } ++ ++ commit = debugfs_create_dir("commit-data", dir); ++ if ((!dir) || IS_ERR(dir)) { ++ MSM_BUS_ERR("Couldn't create commit\n"); ++ goto err; ++ } ++ ++ rules_dbg = debugfs_create_dir("rules-dbg", dir); ++ if ((!rules_dbg) || IS_ERR(rules_dbg)) { ++ MSM_BUS_ERR("Couldn't create rules-dbg\n"); ++ goto err; ++ } ++ ++ if (debugfs_create_file("print_rules", S_IRUGO | S_IWUSR, ++ rules_dbg, &val, &rules_dbg_fops) == NULL) ++ goto err; ++ ++ if (debugfs_create_file("update_request", S_IRUGO | S_IWUSR, ++ shell_client, &val, &shell_client_en_fops) == NULL) ++ goto err; ++ if (debugfs_create_file("ib", S_IRUGO | S_IWUSR, shell_client, &val, ++ &shell_client_ib_fops) == NULL) ++ goto err; ++ if (debugfs_create_file("ab", S_IRUGO | S_IWUSR, shell_client, &val, ++ &shell_client_ab_fops) == NULL) ++ goto err; ++ if (debugfs_create_file("slv", S_IRUGO | S_IWUSR, shell_client, ++ &val, &shell_client_slv_fops) == NULL) ++ goto err; ++ if (debugfs_create_file("mas", S_IRUGO | S_IWUSR, shell_client, ++ &val, &shell_client_mas_fops) == NULL) ++ goto err; ++ if (debugfs_create_file("update-request", S_IRUGO | S_IWUSR, ++ clients, NULL, &msm_bus_dbg_update_request_fops) == NULL) ++ goto err; ++ ++ rules_buf = kzalloc(MAX_BUFF_SIZE, GFP_KERNEL); ++ if (!rules_buf) { ++ MSM_BUS_ERR("Failed to alloc rules_buf"); ++ goto err; ++ } ++ ++ list_for_each_entry(cldata, &cl_list, list) { ++ if (cldata->pdata->name == NULL) { ++ MSM_BUS_DBG("Client name not found\n"); ++ continue; ++ } ++ cldata->file = msm_bus_dbg_create(cldata-> ++ pdata->name, S_IRUGO, clients, cldata->clid); ++ } ++ ++ mutex_lock(&msm_bus_dbg_fablist_lock); ++ list_for_each_entry(fablist, &fabdata_list, list) { ++ fablist->file = debugfs_create_file(fablist->name, S_IRUGO, ++ commit, (void *)fablist->name, &fabric_data_fops); ++ if (fablist->file == NULL) { ++ MSM_BUS_DBG("Cannot create files for commit data\n"); ++ kfree(rules_buf); ++ goto err; ++ } ++ } ++ mutex_unlock(&msm_bus_dbg_fablist_lock); ++ ++ msm_bus_dbg_init_vectors(); ++ return 0; ++err: ++ debugfs_remove_recursive(dir); ++ return -ENODEV; ++} ++late_initcall(msm_bus_debugfs_init); ++ ++static void __exit msm_bus_dbg_teardown(void) ++{ ++ struct msm_bus_fab_list *fablist = NULL, *fablist_temp; ++ struct msm_bus_cldata *cldata = NULL, *cldata_temp; ++ ++ debugfs_remove_recursive(dir); ++ list_for_each_entry_safe(cldata, cldata_temp, &cl_list, list) { ++ list_del(&cldata->list); ++ kfree(cldata); ++ } ++ mutex_lock(&msm_bus_dbg_fablist_lock); ++ list_for_each_entry_safe(fablist, fablist_temp, &fabdata_list, list) { ++ list_del(&fablist->list); ++ kfree(fablist); ++ } ++ kfree(rules_buf); ++ mutex_unlock(&msm_bus_dbg_fablist_lock); ++} ++module_exit(msm_bus_dbg_teardown); ++MODULE_DESCRIPTION("Debugfs for msm bus scaling client"); ++MODULE_LICENSE("GPL v2"); ++MODULE_AUTHOR("Gagan Mac "); +--- /dev/null ++++ b/drivers/bus/msm_bus/msm_bus_fabric_adhoc.c +@@ -0,0 +1,1281 @@ ++/* Copyright (c) 2014, Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include "rpm-smd.h" ++#include "msm_bus_core.h" ++#include "msm_bus_adhoc.h" ++#include "msm_bus_noc.h" ++#include "msm_bus_bimc.h" ++ ++ssize_t vrail_show(struct device *dev, struct device_attribute *attr, ++ char *buf) ++{ ++ struct msm_bus_node_info_type *node_info = NULL; ++ struct msm_bus_node_device_type *bus_node = NULL; ++ ++ bus_node = dev->platform_data; ++ if (!bus_node) ++ return -EINVAL; ++ node_info = bus_node->node_info; ++ ++ return snprintf(buf, PAGE_SIZE, "%u", node_info->vrail_comp); ++} ++ ++ssize_t vrail_store(struct device *dev, struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct msm_bus_node_info_type *node_info = NULL; ++ struct msm_bus_node_device_type *bus_node = NULL; ++ int ret = 0; ++ ++ bus_node = dev->platform_data; ++ if (!bus_node) ++ return -EINVAL; ++ node_info = bus_node->node_info; ++ ++ ret = sscanf(buf, "%u", &node_info->vrail_comp); ++ if (ret != 1) ++ return -EINVAL; ++ return count; ++} ++ ++DEVICE_ATTR(vrail, 0600, vrail_show, vrail_store); ++ ++struct static_rules_type { ++ int num_rules; ++ struct bus_rule_type *rules; ++}; ++ ++static struct static_rules_type static_rules; ++ ++static int enable_nodeclk(struct nodeclk *nclk) ++{ ++ int ret = 0; ++ ++ if (!nclk->enable) { ++ ret = clk_prepare_enable(nclk->clk); ++ ++ if (ret) { ++ MSM_BUS_ERR("%s: failed to enable clk ", __func__); ++ nclk->enable = false; ++ } else ++ nclk->enable = true; ++ } ++ return ret; ++} ++ ++static int disable_nodeclk(struct nodeclk *nclk) ++{ ++ int ret = 0; ++ ++ if (nclk->enable) { ++ clk_disable_unprepare(nclk->clk); ++ nclk->enable = false; ++ } ++ return ret; ++} ++ ++static int setrate_nodeclk(struct nodeclk *nclk, long rate) ++{ ++ int ret = 0; ++ ++ ret = clk_set_rate(nclk->clk, rate); ++ ++ if (ret) ++ MSM_BUS_ERR("%s: failed to setrate clk", __func__); ++ return ret; ++} ++ ++static int msm_bus_agg_fab_clks(struct device *bus_dev, void *data) ++{ ++ struct msm_bus_node_device_type *node = NULL; ++ int ret = 0; ++ int ctx = *(int *)data; ++ ++ if (ctx >= NUM_CTX) { ++ MSM_BUS_ERR("%s: Invalid Context %d", __func__, ctx); ++ goto exit_agg_fab_clks; ++ } ++ ++ node = bus_dev->platform_data; ++ if (!node) { ++ MSM_BUS_ERR("%s: Can't get device info", __func__); ++ goto exit_agg_fab_clks; ++ } ++ ++ if (!node->node_info->is_fab_dev) { ++ struct msm_bus_node_device_type *bus_dev = NULL; ++ ++ bus_dev = node->node_info->bus_device->platform_data; ++ ++ if (node->cur_clk_hz[ctx] >= bus_dev->cur_clk_hz[ctx]) ++ bus_dev->cur_clk_hz[ctx] = node->cur_clk_hz[ctx]; ++ } ++ ++exit_agg_fab_clks: ++ return ret; ++} ++ ++static int msm_bus_reset_fab_clks(struct device *bus_dev, void *data) ++{ ++ struct msm_bus_node_device_type *node = NULL; ++ int ret = 0; ++ int ctx = *(int *)data; ++ ++ if (ctx >= NUM_CTX) { ++ MSM_BUS_ERR("%s: Invalid Context %d", __func__, ctx); ++ goto exit_reset_fab_clks; ++ } ++ ++ node = bus_dev->platform_data; ++ if (!node) { ++ MSM_BUS_ERR("%s: Can't get device info", __func__); ++ goto exit_reset_fab_clks; ++ } ++ ++ if (node->node_info->is_fab_dev) { ++ node->cur_clk_hz[ctx] = 0; ++ MSM_BUS_DBG("Resetting for node %d", node->node_info->id); ++ } ++exit_reset_fab_clks: ++ return ret; ++} ++ ++ ++static int send_rpm_msg(struct device *device) ++{ ++ int ret = 0; ++ int ctx; ++ int rsc_type; ++ struct msm_bus_node_device_type *ndev = ++ device->platform_data; ++ struct msm_rpm_kvp rpm_kvp; ++ ++ if (!ndev) { ++ MSM_BUS_ERR("%s: Error getting node info.", __func__); ++ ret = -ENODEV; ++ goto exit_send_rpm_msg; ++ } ++ ++ rpm_kvp.length = sizeof(uint64_t); ++ rpm_kvp.key = RPM_MASTER_FIELD_BW; ++ ++ for (ctx = MSM_RPM_CTX_ACTIVE_SET; ctx <= MSM_RPM_CTX_SLEEP_SET; ++ ctx++) { ++ if (ctx == MSM_RPM_CTX_ACTIVE_SET) ++ rpm_kvp.data = ++ (uint8_t *)&ndev->node_ab.ab[MSM_RPM_CTX_ACTIVE_SET]; ++ else { ++ rpm_kvp.data = ++ (uint8_t *) &ndev->node_ab.ab[MSM_RPM_CTX_SLEEP_SET]; ++ } ++ ++ if (ndev->node_info->mas_rpm_id != -1) { ++ rsc_type = RPM_BUS_MASTER_REQ; ++ ret = msm_rpm_send_message(ctx, rsc_type, ++ ndev->node_info->mas_rpm_id, &rpm_kvp, 1); ++ if (ret) { ++ MSM_BUS_ERR("%s: Failed to send RPM message:", ++ __func__); ++ MSM_BUS_ERR("%s:Node Id %d RPM id %d", ++ __func__, ndev->node_info->id, ++ ndev->node_info->mas_rpm_id); ++ goto exit_send_rpm_msg; ++ } ++ } ++ ++ if (ndev->node_info->slv_rpm_id != -1) { ++ rsc_type = RPM_BUS_SLAVE_REQ; ++ ret = msm_rpm_send_message(ctx, rsc_type, ++ ndev->node_info->slv_rpm_id, &rpm_kvp, 1); ++ if (ret) { ++ MSM_BUS_ERR("%s: Failed to send RPM message:", ++ __func__); ++ MSM_BUS_ERR("%s: Node Id %d RPM id %d", ++ __func__, ndev->node_info->id, ++ ndev->node_info->slv_rpm_id); ++ goto exit_send_rpm_msg; ++ } ++ } ++ } ++exit_send_rpm_msg: ++ return ret; ++} ++ ++static int flush_bw_data(struct device *node_device, int ctx) ++{ ++ struct msm_bus_node_device_type *node_info; ++ int ret = 0; ++ ++ node_info = node_device->platform_data; ++ if (!node_info) { ++ MSM_BUS_ERR("%s: Unable to find bus device for device", ++ __func__); ++ ret = -ENODEV; ++ goto exit_flush_bw_data; ++ } ++ ++ if (node_info->node_ab.dirty) { ++ if (node_info->ap_owned) { ++ struct msm_bus_node_device_type *bus_device = ++ node_info->node_info->bus_device->platform_data; ++ struct msm_bus_fab_device_type *fabdev = ++ bus_device->fabdev; ++ ++ if (fabdev && fabdev->noc_ops.update_bw_reg && ++ fabdev->noc_ops.update_bw_reg ++ (node_info->node_info->qos_params.mode)) ++ ret = fabdev->noc_ops.set_bw(node_info, ++ fabdev->qos_base, ++ fabdev->base_offset, ++ fabdev->qos_off, ++ fabdev->qos_freq); ++ } else { ++ ret = send_rpm_msg(node_device); ++ ++ if (ret) ++ MSM_BUS_ERR("%s: Failed to send RPM msg for%d", ++ __func__, node_info->node_info->id); ++ } ++ node_info->node_ab.dirty = false; ++ } ++ ++exit_flush_bw_data: ++ return ret; ++ ++} ++ ++static int flush_clk_data(struct device *node_device, int ctx) ++{ ++ struct msm_bus_node_device_type *node; ++ struct nodeclk *nodeclk = NULL; ++ int ret = 0; ++ ++ node = node_device->platform_data; ++ if (!node) { ++ MSM_BUS_ERR("Unable to find bus device"); ++ ret = -ENODEV; ++ goto exit_flush_clk_data; ++ } ++ ++ nodeclk = &node->clk[ctx]; ++ if (node->node_info->is_fab_dev) { ++ if (nodeclk->rate != node->cur_clk_hz[ctx]) { ++ nodeclk->rate = node->cur_clk_hz[ctx]; ++ nodeclk->dirty = true; ++ } ++ } ++ ++ if (nodeclk && nodeclk->clk && nodeclk->dirty) { ++ long rounded_rate; ++ ++ if (nodeclk->rate) { ++ rounded_rate = clk_round_rate(nodeclk->clk, ++ nodeclk->rate); ++ ret = setrate_nodeclk(nodeclk, rounded_rate); ++ ++ if (ret) { ++ MSM_BUS_ERR("%s: Failed to set_rate %lu for %d", ++ __func__, rounded_rate, ++ node->node_info->id); ++ ret = -ENODEV; ++ goto exit_flush_clk_data; ++ } ++ ++ ret = enable_nodeclk(nodeclk); ++ } else ++ ret = disable_nodeclk(nodeclk); ++ ++ if (ret) { ++ MSM_BUS_ERR("%s: Failed to enable for %d", __func__, ++ node->node_info->id); ++ ret = -ENODEV; ++ goto exit_flush_clk_data; ++ } ++ MSM_BUS_DBG("%s: Updated %d clk to %llu", __func__, ++ node->node_info->id, nodeclk->rate); ++ ++ } ++exit_flush_clk_data: ++ /* Reset the aggregated clock rate for fab devices*/ ++ if (node && node->node_info->is_fab_dev) ++ node->cur_clk_hz[ctx] = 0; ++ ++ if (nodeclk) ++ nodeclk->dirty = 0; ++ return ret; ++} ++ ++int msm_bus_commit_data(int *dirty_nodes, int ctx, int num_dirty) ++{ ++ int ret = 0; ++ int i = 0; ++ ++ /* Aggregate the bus clocks */ ++ bus_for_each_dev(&msm_bus_type, NULL, (void *)&ctx, ++ msm_bus_agg_fab_clks); ++ ++ for (i = 0; i < num_dirty; i++) { ++ struct device *node_device = ++ bus_find_device(&msm_bus_type, NULL, ++ (void *)&dirty_nodes[i], ++ msm_bus_device_match_adhoc); ++ ++ if (!node_device) { ++ MSM_BUS_ERR("Can't find device for %d", dirty_nodes[i]); ++ continue; ++ } ++ ++ ret = flush_bw_data(node_device, ctx); ++ if (ret) ++ MSM_BUS_ERR("%s: Error flushing bw data for node %d", ++ __func__, dirty_nodes[i]); ++ ++ ret = flush_clk_data(node_device, ctx); ++ if (ret) ++ MSM_BUS_ERR("%s: Error flushing clk data for node %d", ++ __func__, dirty_nodes[i]); ++ } ++ kfree(dirty_nodes); ++ /* Aggregate the bus clocks */ ++ bus_for_each_dev(&msm_bus_type, NULL, (void *)&ctx, ++ msm_bus_reset_fab_clks); ++ return ret; ++} ++ ++void *msm_bus_realloc_devmem(struct device *dev, void *p, size_t old_size, ++ size_t new_size, gfp_t flags) ++{ ++ void *ret; ++ size_t copy_size = old_size; ++ ++ if (!new_size) { ++ devm_kfree(dev, p); ++ return ZERO_SIZE_PTR; ++ } ++ ++ if (new_size < old_size) ++ copy_size = new_size; ++ ++ ret = devm_kzalloc(dev, new_size, flags); ++ if (!ret) { ++ MSM_BUS_ERR("%s: Error Reallocating memory", __func__); ++ goto exit_realloc_devmem; ++ } ++ ++ memcpy(ret, p, copy_size); ++ devm_kfree(dev, p); ++exit_realloc_devmem: ++ return ret; ++} ++ ++ ++static int add_dirty_node(int **dirty_nodes, int id, int *num_dirty) ++{ ++ int i; ++ int found = 0; ++ int ret = 0; ++ int *dnode = NULL; ++ ++ for (i = 0; i < *num_dirty; i++) { ++ if ((*dirty_nodes)[i] == id) { ++ found = 1; ++ break; ++ } ++ } ++ ++ if (!found) { ++ (*num_dirty)++; ++ dnode = ++ krealloc(*dirty_nodes, sizeof(int) * (*num_dirty), ++ GFP_KERNEL); ++ ++ if (ZERO_OR_NULL_PTR(dnode)) { ++ MSM_BUS_ERR("%s: Failure allocating dirty nodes array", ++ __func__); ++ ret = -ENOMEM; ++ } else { ++ *dirty_nodes = dnode; ++ (*dirty_nodes)[(*num_dirty) - 1] = id; ++ } ++ } ++ ++ return ret; ++} ++ ++int msm_bus_update_bw(struct msm_bus_node_device_type *nodedev, int ctx, ++ int64_t add_bw, int **dirty_nodes, int *num_dirty) ++{ ++ int ret = 0; ++ int i, j; ++ uint64_t cur_ab_slp = 0; ++ uint64_t cur_ab_act = 0; ++ ++ if (nodedev->node_info->virt_dev) ++ goto exit_update_bw; ++ ++ for (i = 0; i < NUM_CTX; i++) { ++ for (j = 0; j < nodedev->num_lnodes; j++) { ++ if (i == DUAL_CTX) { ++ cur_ab_act += ++ nodedev->lnode_list[j].lnode_ab[i]; ++ cur_ab_slp += ++ nodedev->lnode_list[j].lnode_ab[i]; ++ } else ++ cur_ab_act += ++ nodedev->lnode_list[j].lnode_ab[i]; ++ } ++ } ++ ++ if (nodedev->node_ab.ab[MSM_RPM_CTX_ACTIVE_SET] != cur_ab_act) { ++ nodedev->node_ab.ab[MSM_RPM_CTX_ACTIVE_SET] = cur_ab_act; ++ nodedev->node_ab.ab[MSM_RPM_CTX_SLEEP_SET] = cur_ab_slp; ++ nodedev->node_ab.dirty = true; ++ ret = add_dirty_node(dirty_nodes, nodedev->node_info->id, ++ num_dirty); ++ ++ if (ret) { ++ MSM_BUS_ERR("%s: Failed to add dirty node %d", __func__, ++ nodedev->node_info->id); ++ goto exit_update_bw; ++ } ++ } ++ ++exit_update_bw: ++ return ret; ++} ++ ++int msm_bus_update_clks(struct msm_bus_node_device_type *nodedev, ++ int ctx, int **dirty_nodes, int *num_dirty) ++{ ++ int status = 0; ++ struct nodeclk *nodeclk; ++ struct nodeclk *busclk; ++ struct msm_bus_node_device_type *bus_info = NULL; ++ uint64_t req_clk; ++ ++ bus_info = nodedev->node_info->bus_device->platform_data; ++ ++ if (!bus_info) { ++ MSM_BUS_ERR("%s: Unable to find bus device for device %d", ++ __func__, nodedev->node_info->id); ++ status = -ENODEV; ++ goto exit_set_clks; ++ } ++ ++ req_clk = nodedev->cur_clk_hz[ctx]; ++ busclk = &bus_info->clk[ctx]; ++ ++ if (busclk->rate != req_clk) { ++ busclk->rate = req_clk; ++ busclk->dirty = 1; ++ MSM_BUS_DBG("%s: Modifying bus clk %d Rate %llu", __func__, ++ bus_info->node_info->id, req_clk); ++ status = add_dirty_node(dirty_nodes, bus_info->node_info->id, ++ num_dirty); ++ ++ if (status) { ++ MSM_BUS_ERR("%s: Failed to add dirty node %d", __func__, ++ bus_info->node_info->id); ++ goto exit_set_clks; ++ } ++ } ++ ++ req_clk = nodedev->cur_clk_hz[ctx]; ++ nodeclk = &nodedev->clk[ctx]; ++ ++ if (IS_ERR_OR_NULL(nodeclk)) ++ goto exit_set_clks; ++ ++ if (!nodeclk->dirty || (nodeclk->dirty && (nodeclk->rate < req_clk))) { ++ nodeclk->rate = req_clk; ++ nodeclk->dirty = 1; ++ MSM_BUS_DBG("%s: Modifying node clk %d Rate %llu", __func__, ++ nodedev->node_info->id, req_clk); ++ status = add_dirty_node(dirty_nodes, nodedev->node_info->id, ++ num_dirty); ++ if (status) { ++ MSM_BUS_ERR("%s: Failed to add dirty node %d", __func__, ++ nodedev->node_info->id); ++ goto exit_set_clks; ++ } ++ } ++ ++exit_set_clks: ++ return status; ++} ++ ++static void msm_bus_fab_init_noc_ops(struct msm_bus_node_device_type *bus_dev) ++{ ++ switch (bus_dev->fabdev->bus_type) { ++ case MSM_BUS_NOC: ++ msm_bus_noc_set_ops(bus_dev); ++ break; ++ case MSM_BUS_BIMC: ++ msm_bus_bimc_set_ops(bus_dev); ++ break; ++ default: ++ MSM_BUS_ERR("%s: Invalid Bus type", __func__); ++ } ++} ++ ++static int msm_bus_qos_disable_clk(struct msm_bus_node_device_type *node, ++ int disable_bus_qos_clk) ++{ ++ struct msm_bus_node_device_type *bus_node = NULL; ++ int ret = 0; ++ ++ if (!node) { ++ ret = -ENXIO; ++ goto exit_disable_qos_clk; ++ } ++ ++ bus_node = node->node_info->bus_device->platform_data; ++ ++ if (!bus_node) { ++ ret = -ENXIO; ++ goto exit_disable_qos_clk; ++ } ++ ++ if (disable_bus_qos_clk) ++ ret = disable_nodeclk(&bus_node->clk[DUAL_CTX]); ++ ++ if (ret) { ++ MSM_BUS_ERR("%s: Failed to disable bus clk, node %d", ++ __func__, node->node_info->id); ++ goto exit_disable_qos_clk; ++ } ++ ++ if (!IS_ERR_OR_NULL(node->qos_clk.clk)) { ++ ret = disable_nodeclk(&node->qos_clk); ++ ++ if (ret) { ++ MSM_BUS_ERR("%s: Failed to disable mas qos clk,node %d", ++ __func__, node->node_info->id); ++ goto exit_disable_qos_clk; ++ } ++ } ++ ++exit_disable_qos_clk: ++ return ret; ++} ++ ++static int msm_bus_qos_enable_clk(struct msm_bus_node_device_type *node) ++{ ++ struct msm_bus_node_device_type *bus_node = NULL; ++ long rounded_rate; ++ int ret = 0; ++ int bus_qos_enabled = 0; ++ ++ if (!node) { ++ ret = -ENXIO; ++ goto exit_enable_qos_clk; ++ } ++ ++ bus_node = node->node_info->bus_device->platform_data; ++ ++ if (!bus_node) { ++ ret = -ENXIO; ++ goto exit_enable_qos_clk; ++ } ++ ++ /* Check if the bus clk is already set before trying to set it ++ * Do this only during ++ * a. Bootup ++ * b. Only for bus clks ++ **/ ++ if (!clk_get_rate(bus_node->clk[DUAL_CTX].clk)) { ++ rounded_rate = clk_round_rate(bus_node->clk[DUAL_CTX].clk, 1); ++ ret = setrate_nodeclk(&bus_node->clk[DUAL_CTX], rounded_rate); ++ if (ret) { ++ MSM_BUS_ERR("%s: Failed to set bus clk, node %d", ++ __func__, node->node_info->id); ++ goto exit_enable_qos_clk; ++ } ++ ++ ret = enable_nodeclk(&bus_node->clk[DUAL_CTX]); ++ if (ret) { ++ MSM_BUS_ERR("%s: Failed to enable bus clk, node %d", ++ __func__, node->node_info->id); ++ goto exit_enable_qos_clk; ++ } ++ bus_qos_enabled = 1; ++ } ++ ++ if (!IS_ERR_OR_NULL(node->qos_clk.clk)) { ++ rounded_rate = clk_round_rate(node->qos_clk.clk, 1); ++ ret = setrate_nodeclk(&node->qos_clk, rounded_rate); ++ if (ret) { ++ MSM_BUS_ERR("%s: Failed to enable mas qos clk, node %d", ++ __func__, node->node_info->id); ++ goto exit_enable_qos_clk; ++ } ++ ++ ret = enable_nodeclk(&node->qos_clk); ++ if (ret) { ++ MSM_BUS_ERR("Err enable mas qos clk, node %d ret %d", ++ node->node_info->id, ret); ++ goto exit_enable_qos_clk; ++ } ++ } ++ ret = bus_qos_enabled; ++ ++exit_enable_qos_clk: ++ return ret; ++} ++ ++int msm_bus_enable_limiter(struct msm_bus_node_device_type *node_dev, ++ bool enable, uint64_t lim_bw) ++{ ++ int ret = 0; ++ struct msm_bus_node_device_type *bus_node_dev; ++ ++ if (!node_dev) { ++ MSM_BUS_ERR("No device specified"); ++ ret = -ENXIO; ++ goto exit_enable_limiter; ++ } ++ ++ if (!node_dev->ap_owned) { ++ MSM_BUS_ERR("Device is not AP owned %d.", ++ node_dev->node_info->id); ++ ret = -ENXIO; ++ goto exit_enable_limiter; ++ } ++ ++ bus_node_dev = node_dev->node_info->bus_device->platform_data; ++ if (!bus_node_dev) { ++ MSM_BUS_ERR("Unable to get bus device infofor %d", ++ node_dev->node_info->id); ++ ret = -ENXIO; ++ goto exit_enable_limiter; ++ } ++ if (bus_node_dev->fabdev && ++ bus_node_dev->fabdev->noc_ops.limit_mport) { ++ ret = msm_bus_qos_enable_clk(node_dev); ++ if (ret < 0) { ++ MSM_BUS_ERR("Can't Enable QoS clk %d", ++ node_dev->node_info->id); ++ goto exit_enable_limiter; ++ } ++ bus_node_dev->fabdev->noc_ops.limit_mport( ++ node_dev, ++ bus_node_dev->fabdev->qos_base, ++ bus_node_dev->fabdev->base_offset, ++ bus_node_dev->fabdev->qos_off, ++ bus_node_dev->fabdev->qos_freq, ++ enable, lim_bw); ++ msm_bus_qos_disable_clk(node_dev, ret); ++ } ++ ++exit_enable_limiter: ++ return ret; ++} ++ ++static int msm_bus_dev_init_qos(struct device *dev, void *data) ++{ ++ int ret = 0; ++ struct msm_bus_node_device_type *node_dev = NULL; ++ ++ node_dev = dev->platform_data; ++ ++ if (!node_dev) { ++ MSM_BUS_ERR("%s: Unable to get node device info" , __func__); ++ ret = -ENXIO; ++ goto exit_init_qos; ++ } ++ ++ MSM_BUS_DBG("Device = %d", node_dev->node_info->id); ++ ++ if (node_dev->ap_owned) { ++ struct msm_bus_node_device_type *bus_node_info; ++ ++ bus_node_info = node_dev->node_info->bus_device->platform_data; ++ ++ if (!bus_node_info) { ++ MSM_BUS_ERR("%s: Unable to get bus device infofor %d", ++ __func__, ++ node_dev->node_info->id); ++ ret = -ENXIO; ++ goto exit_init_qos; ++ } ++ ++ if (bus_node_info->fabdev && ++ bus_node_info->fabdev->noc_ops.qos_init) { ++ int ret = 0; ++ ++ if (node_dev->ap_owned && ++ (node_dev->node_info->qos_params.mode) != -1) { ++ ++ if (bus_node_info->fabdev->bypass_qos_prg) ++ goto exit_init_qos; ++ ++ ret = msm_bus_qos_enable_clk(node_dev); ++ if (ret < 0) { ++ MSM_BUS_ERR("Can't Enable QoS clk %d", ++ node_dev->node_info->id); ++ goto exit_init_qos; ++ } ++ ++ bus_node_info->fabdev->noc_ops.qos_init( ++ node_dev, ++ bus_node_info->fabdev->qos_base, ++ bus_node_info->fabdev->base_offset, ++ bus_node_info->fabdev->qos_off, ++ bus_node_info->fabdev->qos_freq); ++ msm_bus_qos_disable_clk(node_dev, ret); ++ } ++ } else ++ MSM_BUS_ERR("%s: Skipping QOS init for %d", ++ __func__, node_dev->node_info->id); ++ } ++exit_init_qos: ++ return ret; ++} ++ ++static int msm_bus_fabric_init(struct device *dev, ++ struct msm_bus_node_device_type *pdata) ++{ ++ struct msm_bus_fab_device_type *fabdev; ++ struct msm_bus_node_device_type *node_dev = NULL; ++ int ret = 0; ++ ++ node_dev = dev->platform_data; ++ if (!node_dev) { ++ MSM_BUS_ERR("%s: Unable to get bus device info" , __func__); ++ ret = -ENXIO; ++ goto exit_fabric_init; ++ } ++ ++ if (node_dev->node_info->virt_dev) { ++ MSM_BUS_ERR("%s: Skip Fab init for virtual device %d", __func__, ++ node_dev->node_info->id); ++ goto exit_fabric_init; ++ } ++ ++ fabdev = devm_kzalloc(dev, sizeof(struct msm_bus_fab_device_type), ++ GFP_KERNEL); ++ if (!fabdev) { ++ MSM_BUS_ERR("Fabric alloc failed\n"); ++ ret = -ENOMEM; ++ goto exit_fabric_init; ++ } ++ ++ node_dev->fabdev = fabdev; ++ fabdev->pqos_base = pdata->fabdev->pqos_base; ++ fabdev->qos_range = pdata->fabdev->qos_range; ++ fabdev->base_offset = pdata->fabdev->base_offset; ++ fabdev->qos_off = pdata->fabdev->qos_off; ++ fabdev->qos_freq = pdata->fabdev->qos_freq; ++ fabdev->bus_type = pdata->fabdev->bus_type; ++ fabdev->bypass_qos_prg = pdata->fabdev->bypass_qos_prg; ++ fabdev->util_fact = pdata->fabdev->util_fact; ++ fabdev->vrail_comp = pdata->fabdev->vrail_comp; ++ msm_bus_fab_init_noc_ops(node_dev); ++ ++ fabdev->qos_base = devm_ioremap(dev, ++ fabdev->pqos_base, fabdev->qos_range); ++ if (!fabdev->qos_base) { ++ MSM_BUS_ERR("%s: Error remapping address 0x%zx :bus device %d", ++ __func__, ++ (size_t)fabdev->pqos_base, node_dev->node_info->id); ++ ret = -ENOMEM; ++ goto exit_fabric_init; ++ } ++ ++ /*if (msmbus_coresight_init(pdev)) ++ pr_warn("Coresight support absent for bus: %d\n", pdata->id);*/ ++exit_fabric_init: ++ return ret; ++} ++ ++static int msm_bus_init_clk(struct device *bus_dev, ++ struct msm_bus_node_device_type *pdata) ++{ ++ unsigned int ctx; ++ int ret = 0; ++ struct msm_bus_node_device_type *node_dev = bus_dev->platform_data; ++ ++ for (ctx = 0; ctx < NUM_CTX; ctx++) { ++ if (!IS_ERR_OR_NULL(pdata->clk[ctx].clk)) { ++ node_dev->clk[ctx].clk = pdata->clk[ctx].clk; ++ node_dev->clk[ctx].enable = false; ++ node_dev->clk[ctx].dirty = false; ++ MSM_BUS_ERR("%s: Valid node clk node %d ctx %d", ++ __func__, node_dev->node_info->id, ctx); ++ } ++ } ++ ++ if (!IS_ERR_OR_NULL(pdata->qos_clk.clk)) { ++ node_dev->qos_clk.clk = pdata->qos_clk.clk; ++ node_dev->qos_clk.enable = false; ++ MSM_BUS_ERR("%s: Valid Iface clk node %d", __func__, ++ node_dev->node_info->id); ++ } ++ ++ return ret; ++} ++ ++static int msm_bus_copy_node_info(struct msm_bus_node_device_type *pdata, ++ struct device *bus_dev) ++{ ++ int ret = 0; ++ struct msm_bus_node_info_type *node_info = NULL; ++ struct msm_bus_node_info_type *pdata_node_info = NULL; ++ struct msm_bus_node_device_type *bus_node = NULL; ++ ++ bus_node = bus_dev->platform_data; ++ ++ if (!bus_node || !pdata) { ++ ret = -ENXIO; ++ MSM_BUS_ERR("%s: Invalid pointers pdata %p, bus_node %p", ++ __func__, pdata, bus_node); ++ goto exit_copy_node_info; ++ } ++ ++ node_info = bus_node->node_info; ++ pdata_node_info = pdata->node_info; ++ ++ node_info->name = pdata_node_info->name; ++ node_info->id = pdata_node_info->id; ++ node_info->bus_device_id = pdata_node_info->bus_device_id; ++ node_info->mas_rpm_id = pdata_node_info->mas_rpm_id; ++ node_info->slv_rpm_id = pdata_node_info->slv_rpm_id; ++ node_info->num_connections = pdata_node_info->num_connections; ++ node_info->num_blist = pdata_node_info->num_blist; ++ node_info->num_qports = pdata_node_info->num_qports; ++ node_info->buswidth = pdata_node_info->buswidth; ++ node_info->virt_dev = pdata_node_info->virt_dev; ++ node_info->is_fab_dev = pdata_node_info->is_fab_dev; ++ node_info->qos_params.mode = pdata_node_info->qos_params.mode; ++ node_info->qos_params.prio1 = pdata_node_info->qos_params.prio1; ++ node_info->qos_params.prio0 = pdata_node_info->qos_params.prio0; ++ node_info->qos_params.prio_lvl = pdata_node_info->qos_params.prio_lvl; ++ node_info->qos_params.prio_rd = pdata_node_info->qos_params.prio_rd; ++ node_info->qos_params.prio_wr = pdata_node_info->qos_params.prio_wr; ++ node_info->qos_params.gp = pdata_node_info->qos_params.gp; ++ node_info->qos_params.thmp = pdata_node_info->qos_params.thmp; ++ node_info->qos_params.ws = pdata_node_info->qos_params.ws; ++ node_info->qos_params.bw_buffer = pdata_node_info->qos_params.bw_buffer; ++ node_info->util_fact = pdata_node_info->util_fact; ++ node_info->vrail_comp = pdata_node_info->vrail_comp; ++ ++ node_info->dev_connections = devm_kzalloc(bus_dev, ++ sizeof(struct device *) * ++ pdata_node_info->num_connections, ++ GFP_KERNEL); ++ if (!node_info->dev_connections) { ++ MSM_BUS_ERR("%s:Bus dev connections alloc failed\n", __func__); ++ ret = -ENOMEM; ++ goto exit_copy_node_info; ++ } ++ ++ node_info->connections = devm_kzalloc(bus_dev, ++ sizeof(int) * pdata_node_info->num_connections, ++ GFP_KERNEL); ++ if (!node_info->connections) { ++ MSM_BUS_ERR("%s:Bus connections alloc failed\n", __func__); ++ devm_kfree(bus_dev, node_info->dev_connections); ++ ret = -ENOMEM; ++ goto exit_copy_node_info; ++ } ++ ++ memcpy(node_info->connections, ++ pdata_node_info->connections, ++ sizeof(int) * pdata_node_info->num_connections); ++ ++ node_info->black_connections = devm_kzalloc(bus_dev, ++ sizeof(struct device *) * ++ pdata_node_info->num_blist, ++ GFP_KERNEL); ++ if (!node_info->black_connections) { ++ MSM_BUS_ERR("%s: Bus black connections alloc failed\n", ++ __func__); ++ devm_kfree(bus_dev, node_info->dev_connections); ++ devm_kfree(bus_dev, node_info->connections); ++ ret = -ENOMEM; ++ goto exit_copy_node_info; ++ } ++ ++ node_info->black_listed_connections = devm_kzalloc(bus_dev, ++ pdata_node_info->num_blist * sizeof(int), ++ GFP_KERNEL); ++ if (!node_info->black_listed_connections) { ++ MSM_BUS_ERR("%s:Bus black list connections alloc failed\n", ++ __func__); ++ devm_kfree(bus_dev, node_info->black_connections); ++ devm_kfree(bus_dev, node_info->dev_connections); ++ devm_kfree(bus_dev, node_info->connections); ++ ret = -ENOMEM; ++ goto exit_copy_node_info; ++ } ++ ++ memcpy(node_info->black_listed_connections, ++ pdata_node_info->black_listed_connections, ++ sizeof(int) * pdata_node_info->num_blist); ++ ++ node_info->qport = devm_kzalloc(bus_dev, ++ sizeof(int) * pdata_node_info->num_qports, ++ GFP_KERNEL); ++ if (!node_info->qport) { ++ MSM_BUS_ERR("%s:Bus qport allocation failed\n", __func__); ++ devm_kfree(bus_dev, node_info->dev_connections); ++ devm_kfree(bus_dev, node_info->connections); ++ devm_kfree(bus_dev, node_info->black_listed_connections); ++ ret = -ENOMEM; ++ goto exit_copy_node_info; ++ } ++ ++ memcpy(node_info->qport, ++ pdata_node_info->qport, ++ sizeof(int) * pdata_node_info->num_qports); ++ ++exit_copy_node_info: ++ return ret; ++} ++ ++static struct device *msm_bus_device_init( ++ struct msm_bus_node_device_type *pdata) ++{ ++ struct device *bus_dev = NULL; ++ struct msm_bus_node_device_type *bus_node = NULL; ++ struct msm_bus_node_info_type *node_info = NULL; ++ int ret = 0; ++ ++ bus_dev = kzalloc(sizeof(struct device), GFP_KERNEL); ++ if (!bus_dev) { ++ MSM_BUS_ERR("%s:Device alloc failed\n", __func__); ++ bus_dev = NULL; ++ goto exit_device_init; ++ } ++ /** ++ * Init here so we can use devm calls ++ */ ++ device_initialize(bus_dev); ++ ++ bus_node = devm_kzalloc(bus_dev, ++ sizeof(struct msm_bus_node_device_type), GFP_KERNEL); ++ if (!bus_node) { ++ MSM_BUS_ERR("%s:Bus node alloc failed\n", __func__); ++ kfree(bus_dev); ++ bus_dev = NULL; ++ goto exit_device_init; ++ } ++ ++ node_info = devm_kzalloc(bus_dev, ++ sizeof(struct msm_bus_node_info_type), GFP_KERNEL); ++ if (!node_info) { ++ MSM_BUS_ERR("%s:Bus node info alloc failed\n", __func__); ++ devm_kfree(bus_dev, bus_node); ++ kfree(bus_dev); ++ bus_dev = NULL; ++ goto exit_device_init; ++ } ++ ++ bus_node->node_info = node_info; ++ bus_node->ap_owned = pdata->ap_owned; ++ bus_dev->platform_data = bus_node; ++ ++ if (msm_bus_copy_node_info(pdata, bus_dev) < 0) { ++ devm_kfree(bus_dev, bus_node); ++ devm_kfree(bus_dev, node_info); ++ kfree(bus_dev); ++ bus_dev = NULL; ++ goto exit_device_init; ++ } ++ ++ bus_dev->bus = &msm_bus_type; ++ dev_set_name(bus_dev, bus_node->node_info->name); ++ ++ ret = device_add(bus_dev); ++ if (ret < 0) { ++ MSM_BUS_ERR("%s: Error registering device %d", ++ __func__, pdata->node_info->id); ++ devm_kfree(bus_dev, bus_node); ++ devm_kfree(bus_dev, node_info->dev_connections); ++ devm_kfree(bus_dev, node_info->connections); ++ devm_kfree(bus_dev, node_info->black_connections); ++ devm_kfree(bus_dev, node_info->black_listed_connections); ++ devm_kfree(bus_dev, node_info); ++ kfree(bus_dev); ++ bus_dev = NULL; ++ goto exit_device_init; ++ } ++ device_create_file(bus_dev, &dev_attr_vrail); ++ ++exit_device_init: ++ return bus_dev; ++} ++ ++static int msm_bus_setup_dev_conn(struct device *bus_dev, void *data) ++{ ++ struct msm_bus_node_device_type *bus_node = NULL; ++ int ret = 0; ++ int j; ++ ++ bus_node = bus_dev->platform_data; ++ if (!bus_node) { ++ MSM_BUS_ERR("%s: Can't get device info", __func__); ++ ret = -ENODEV; ++ goto exit_setup_dev_conn; ++ } ++ ++ /* Setup parent bus device for this node */ ++ if (!bus_node->node_info->is_fab_dev) { ++ struct device *bus_parent_device = ++ bus_find_device(&msm_bus_type, NULL, ++ (void *)&bus_node->node_info->bus_device_id, ++ msm_bus_device_match_adhoc); ++ ++ if (!bus_parent_device) { ++ MSM_BUS_ERR("%s: Error finding parentdev %d parent %d", ++ __func__, ++ bus_node->node_info->id, ++ bus_node->node_info->bus_device_id); ++ ret = -ENXIO; ++ goto exit_setup_dev_conn; ++ } ++ bus_node->node_info->bus_device = bus_parent_device; ++ } ++ ++ bus_node->node_info->is_traversed = false; ++ ++ for (j = 0; j < bus_node->node_info->num_connections; j++) { ++ bus_node->node_info->dev_connections[j] = ++ bus_find_device(&msm_bus_type, NULL, ++ (void *)&bus_node->node_info->connections[j], ++ msm_bus_device_match_adhoc); ++ ++ if (!bus_node->node_info->dev_connections[j]) { ++ MSM_BUS_ERR("%s: Error finding conn %d for device %d", ++ __func__, bus_node->node_info->connections[j], ++ bus_node->node_info->id); ++ ret = -ENODEV; ++ goto exit_setup_dev_conn; ++ } ++ } ++ ++ for (j = 0; j < bus_node->node_info->num_blist; j++) { ++ bus_node->node_info->black_connections[j] = ++ bus_find_device(&msm_bus_type, NULL, ++ (void *)&bus_node->node_info-> ++ black_listed_connections[j], ++ msm_bus_device_match_adhoc); ++ ++ if (!bus_node->node_info->black_connections[j]) { ++ MSM_BUS_ERR("%s: Error finding conn %d for device %d\n", ++ __func__, bus_node->node_info-> ++ black_listed_connections[j], ++ bus_node->node_info->id); ++ ret = -ENODEV; ++ goto exit_setup_dev_conn; ++ } ++ } ++ ++exit_setup_dev_conn: ++ return ret; ++} ++ ++static int msm_bus_node_debug(struct device *bus_dev, void *data) ++{ ++ int j; ++ int ret = 0; ++ struct msm_bus_node_device_type *bus_node = NULL; ++ ++ bus_node = bus_dev->platform_data; ++ if (!bus_node) { ++ MSM_BUS_ERR("%s: Can't get device info", __func__); ++ ret = -ENODEV; ++ goto exit_node_debug; ++ } ++ ++ MSM_BUS_DBG("Device = %d buswidth %u", bus_node->node_info->id, ++ bus_node->node_info->buswidth); ++ for (j = 0; j < bus_node->node_info->num_connections; j++) { ++ struct msm_bus_node_device_type *bdev = ++ (struct msm_bus_node_device_type *) ++ bus_node->node_info->dev_connections[j]->platform_data; ++ MSM_BUS_DBG("\n\t Connection[%d] %d", j, bdev->node_info->id); ++ } ++ ++exit_node_debug: ++ return ret; ++} ++ ++static int msm_bus_device_probe(struct platform_device *pdev) ++{ ++ unsigned int i, ret; ++ struct msm_bus_device_node_registration *pdata; ++ ++ /* If possible, get pdata from device-tree */ ++ if (pdev->dev.of_node) ++ pdata = msm_bus_of_to_pdata(pdev); ++ else { ++ pdata = (struct msm_bus_device_node_registration *)pdev-> ++ dev.platform_data; ++ } ++ ++ if (IS_ERR_OR_NULL(pdata)) { ++ MSM_BUS_ERR("No platform data found"); ++ ret = -ENODATA; ++ goto exit_device_probe; ++ } ++ ++ for (i = 0; i < pdata->num_devices; i++) { ++ struct device *node_dev = NULL; ++ ++ node_dev = msm_bus_device_init(&pdata->info[i]); ++ ++ if (!node_dev) { ++ MSM_BUS_ERR("%s: Error during dev init for %d", ++ __func__, pdata->info[i].node_info->id); ++ ret = -ENXIO; ++ goto exit_device_probe; ++ } ++ ++ ret = msm_bus_init_clk(node_dev, &pdata->info[i]); ++ /*Is this a fabric device ?*/ ++ if (pdata->info[i].node_info->is_fab_dev) { ++ MSM_BUS_DBG("%s: %d is a fab", __func__, ++ pdata->info[i].node_info->id); ++ ret = msm_bus_fabric_init(node_dev, &pdata->info[i]); ++ if (ret) { ++ MSM_BUS_ERR("%s: Error intializing fab %d", ++ __func__, pdata->info[i].node_info->id); ++ goto exit_device_probe; ++ } ++ } ++ } ++ ++ ret = bus_for_each_dev(&msm_bus_type, NULL, NULL, ++ msm_bus_setup_dev_conn); ++ if (ret) { ++ MSM_BUS_ERR("%s: Error setting up dev connections", __func__); ++ goto exit_device_probe; ++ } ++ ++ ret = bus_for_each_dev(&msm_bus_type, NULL, NULL, msm_bus_dev_init_qos); ++ if (ret) { ++ MSM_BUS_ERR("%s: Error during qos init", __func__); ++ goto exit_device_probe; ++ } ++ ++ bus_for_each_dev(&msm_bus_type, NULL, NULL, msm_bus_node_debug); ++ ++ /* Register the arb layer ops */ ++ msm_bus_arb_setops_adhoc(&arb_ops); ++ devm_kfree(&pdev->dev, pdata->info); ++ devm_kfree(&pdev->dev, pdata); ++exit_device_probe: ++ return ret; ++} ++ ++static int msm_bus_device_rules_probe(struct platform_device *pdev) ++{ ++ struct bus_rule_type *rule_data = NULL; ++ int num_rules = 0; ++ ++ num_rules = msm_bus_of_get_static_rules(pdev, &rule_data); ++ ++ if (!rule_data) ++ goto exit_rules_probe; ++ ++ msm_rule_register(num_rules, rule_data, NULL); ++ static_rules.num_rules = num_rules; ++ static_rules.rules = rule_data; ++ pdev->dev.platform_data = &static_rules; ++ ++exit_rules_probe: ++ return 0; ++} ++ ++int msm_bus_device_rules_remove(struct platform_device *pdev) ++{ ++ struct static_rules_type *static_rules = NULL; ++ ++ static_rules = pdev->dev.platform_data; ++ if (static_rules) ++ msm_rule_unregister(static_rules->num_rules, ++ static_rules->rules, NULL); ++ return 0; ++} ++ ++static int msm_bus_free_dev(struct device *dev, void *data) ++{ ++ struct msm_bus_node_device_type *bus_node = NULL; ++ ++ bus_node = dev->platform_data; ++ ++ if (bus_node) ++ MSM_BUS_ERR("\n%s: Removing device %d", __func__, ++ bus_node->node_info->id); ++ device_unregister(dev); ++ return 0; ++} ++ ++int msm_bus_device_remove(struct platform_device *pdev) ++{ ++ bus_for_each_dev(&msm_bus_type, NULL, NULL, msm_bus_free_dev); ++ return 0; ++} ++ ++static struct of_device_id rules_match[] = { ++ {.compatible = "qcom,msm-bus-static-bw-rules"}, ++ {} ++}; ++ ++static struct platform_driver msm_bus_rules_driver = { ++ .probe = msm_bus_device_rules_probe, ++ .remove = msm_bus_device_rules_remove, ++ .driver = { ++ .name = "msm_bus_rules_device", ++ .owner = THIS_MODULE, ++ .of_match_table = rules_match, ++ }, ++}; ++ ++static struct of_device_id fabric_match[] = { ++ {.compatible = "qcom,msm-bus-device"}, ++ {} ++}; ++ ++static struct platform_driver msm_bus_device_driver = { ++ .probe = msm_bus_device_probe, ++ .remove = msm_bus_device_remove, ++ .driver = { ++ .name = "msm_bus_device", ++ .owner = THIS_MODULE, ++ .of_match_table = fabric_match, ++ }, ++}; ++ ++int __init msm_bus_device_init_driver(void) ++{ ++ int rc; ++ ++ MSM_BUS_ERR("msm_bus_fabric_init_driver\n"); ++ rc = platform_driver_register(&msm_bus_device_driver); ++ ++ if (rc) { ++ MSM_BUS_ERR("Failed to register bus device driver"); ++ return rc; ++ } ++ return platform_driver_register(&msm_bus_rules_driver); ++} ++subsys_initcall(msm_bus_device_init_driver); +--- /dev/null ++++ b/drivers/bus/msm_bus/msm_bus_id.c +@@ -0,0 +1,94 @@ ++/* Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include "msm-bus.h" ++#include "msm-bus-board.h" ++#include "msm_bus_core.h" ++#include "msm_bus_noc.h" ++#include "msm_bus_bimc.h" ++ ++static uint32_t master_iids[MSM_BUS_MASTER_LAST]; ++static uint32_t slave_iids[MSM_BUS_SLAVE_LAST - SLAVE_ID_KEY]; ++ ++static void msm_bus_assign_iids(struct msm_bus_fabric_registration ++ *fabreg, int fabid) ++{ ++ int i; ++ for (i = 0; i < fabreg->len; i++) { ++ if (!fabreg->info[i].gateway) { ++ fabreg->info[i].priv_id = fabid + fabreg->info[i].id; ++ if (fabreg->info[i].id < SLAVE_ID_KEY) { ++ if (fabreg->info[i].id >= MSM_BUS_MASTER_LAST) { ++ WARN(1, "id %d exceeds array size!\n", ++ fabreg->info[i].id); ++ continue; ++ } ++ ++ master_iids[fabreg->info[i].id] = ++ fabreg->info[i].priv_id; ++ } else { ++ if ((fabreg->info[i].id - SLAVE_ID_KEY) >= ++ (MSM_BUS_SLAVE_LAST - SLAVE_ID_KEY)) { ++ WARN(1, "id %d exceeds array size!\n", ++ fabreg->info[i].id); ++ continue; ++ } ++ ++ slave_iids[fabreg->info[i].id - (SLAVE_ID_KEY)] ++ = fabreg->info[i].priv_id; ++ } ++ } else { ++ fabreg->info[i].priv_id = fabreg->info[i].id; ++ } ++ } ++} ++ ++static int msm_bus_get_iid(int id) ++{ ++ if ((id < SLAVE_ID_KEY && id >= MSM_BUS_MASTER_LAST) || ++ id >= MSM_BUS_SLAVE_LAST) { ++ MSM_BUS_ERR("Cannot get iid. Invalid id %d passed\n", id); ++ return -EINVAL; ++ } ++ ++ return CHECK_ID(((id < SLAVE_ID_KEY) ? master_iids[id] : ++ slave_iids[id - SLAVE_ID_KEY]), id); ++} ++ ++static struct msm_bus_board_algorithm msm_bus_id_algo = { ++ .get_iid = msm_bus_get_iid, ++ .assign_iids = msm_bus_assign_iids, ++}; ++ ++int msm_bus_board_rpm_get_il_ids(uint16_t *id) ++{ ++ return -ENXIO; ++} ++ ++void msm_bus_board_init(struct msm_bus_fabric_registration *pdata) ++{ ++ pdata->board_algo = &msm_bus_id_algo; ++} ++ ++void msm_bus_board_set_nfab(struct msm_bus_fabric_registration *pdata, ++ int nfab) ++{ ++ if (nfab <= 0) ++ return; ++ ++ msm_bus_id_algo.board_nfab = nfab; ++} +--- /dev/null ++++ b/drivers/bus/msm_bus/msm_bus_noc.c +@@ -0,0 +1,770 @@ ++/* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#define pr_fmt(fmt) "AXI: NOC: %s(): " fmt, __func__ ++ ++#include ++#include ++#include "msm-bus-board.h" ++#include "msm_bus_core.h" ++#include "msm_bus_noc.h" ++#include "msm_bus_adhoc.h" ++ ++/* NOC_QOS generic */ ++#define __CLZ(x) ((8 * sizeof(uint32_t)) - 1 - __fls(x)) ++#define SAT_SCALE 16 /* 16 bytes minimum for saturation */ ++#define BW_SCALE 256 /* 1/256 byte per cycle unit */ ++#define QOS_DEFAULT_BASEOFFSET 0x00003000 ++#define QOS_DEFAULT_DELTA 0x80 ++#define MAX_BW_FIELD (NOC_QOS_BWn_BW_BMSK >> NOC_QOS_BWn_BW_SHFT) ++#define MAX_SAT_FIELD (NOC_QOS_SATn_SAT_BMSK >> NOC_QOS_SATn_SAT_SHFT) ++ ++#define NOC_QOS_REG_BASE(b, o) ((b) + (o)) ++ ++#define NOC_QOS_ID_COREIDn_ADDR(b, o, n, d) \ ++ (NOC_QOS_REG_BASE(b, o) + (d) * (n)) ++enum noc_qos_id_coreidn { ++ NOC_QOS_ID_COREIDn_RMSK = 0xffffffff, ++ NOC_QOS_ID_COREIDn_MAXn = 32, ++ NOC_QOS_ID_COREIDn_CORECHSUM_BMSK = 0xffffff00, ++ NOC_QOS_ID_COREIDn_CORECHSUM_SHFT = 0x8, ++ NOC_QOS_ID_COREIDn_CORETYPEID_BMSK = 0xff, ++ NOC_QOS_ID_COREIDn_CORETYPEID_SHFT = 0x0, ++}; ++ ++#define NOC_QOS_ID_REVISIONIDn_ADDR(b, o, n, d) \ ++ (NOC_QOS_REG_BASE(b, o) + 0x4 + (d) * (n)) ++enum noc_qos_id_revisionidn { ++ NOC_QOS_ID_REVISIONIDn_RMSK = 0xffffffff, ++ NOC_QOS_ID_REVISIONIDn_MAXn = 32, ++ NOC_QOS_ID_REVISIONIDn_FLEXNOCID_BMSK = 0xffffff00, ++ NOC_QOS_ID_REVISIONIDn_FLEXNOCID_SHFT = 0x8, ++ NOC_QOS_ID_REVISIONIDn_USERID_BMSK = 0xff, ++ NOC_QOS_ID_REVISIONIDn_USERID_SHFT = 0x0, ++}; ++ ++#define NOC_QOS_PRIORITYn_ADDR(b, o, n, d) \ ++ (NOC_QOS_REG_BASE(b, o) + 0x8 + (d) * (n)) ++enum noc_qos_id_priorityn { ++ NOC_QOS_PRIORITYn_RMSK = 0x0000000f, ++ NOC_QOS_PRIORITYn_MAXn = 32, ++ NOC_QOS_PRIORITYn_P1_BMSK = 0xc, ++ NOC_QOS_PRIORITYn_P1_SHFT = 0x2, ++ NOC_QOS_PRIORITYn_P0_BMSK = 0x3, ++ NOC_QOS_PRIORITYn_P0_SHFT = 0x0, ++}; ++ ++#define NOC_QOS_MODEn_ADDR(b, o, n, d) \ ++ (NOC_QOS_REG_BASE(b, o) + 0xC + (d) * (n)) ++enum noc_qos_id_moden_rmsk { ++ NOC_QOS_MODEn_RMSK = 0x00000003, ++ NOC_QOS_MODEn_MAXn = 32, ++ NOC_QOS_MODEn_MODE_BMSK = 0x3, ++ NOC_QOS_MODEn_MODE_SHFT = 0x0, ++}; ++ ++#define NOC_QOS_BWn_ADDR(b, o, n, d) \ ++ (NOC_QOS_REG_BASE(b, o) + 0x10 + (d) * (n)) ++enum noc_qos_id_bwn { ++ NOC_QOS_BWn_RMSK = 0x0000ffff, ++ NOC_QOS_BWn_MAXn = 32, ++ NOC_QOS_BWn_BW_BMSK = 0xffff, ++ NOC_QOS_BWn_BW_SHFT = 0x0, ++}; ++ ++/* QOS Saturation registers */ ++#define NOC_QOS_SATn_ADDR(b, o, n, d) \ ++ (NOC_QOS_REG_BASE(b, o) + 0x14 + (d) * (n)) ++enum noc_qos_id_saturationn { ++ NOC_QOS_SATn_RMSK = 0x000003ff, ++ NOC_QOS_SATn_MAXn = 32, ++ NOC_QOS_SATn_SAT_BMSK = 0x3ff, ++ NOC_QOS_SATn_SAT_SHFT = 0x0, ++}; ++ ++static int noc_div(uint64_t *a, uint32_t b) ++{ ++ if ((*a > 0) && (*a < b)) ++ return 1; ++ else ++ return do_div(*a, b); ++} ++ ++/** ++ * Calculates bw hardware is using from register values ++ * bw returned is in bytes/sec ++ */ ++static uint64_t noc_bw(uint32_t bw_field, uint32_t qos_freq) ++{ ++ uint64_t res; ++ uint32_t rem, scale; ++ ++ res = 2 * qos_freq * bw_field; ++ scale = BW_SCALE * 1000; ++ rem = noc_div(&res, scale); ++ MSM_BUS_DBG("NOC: Calculated bw: %llu\n", res * 1000000ULL); ++ return res * 1000000ULL; ++} ++ ++static uint32_t noc_bw_ceil(long int bw_field, uint32_t qos_freq) ++{ ++ uint64_t bw_temp = 2 * qos_freq * bw_field; ++ uint32_t scale = 1000 * BW_SCALE; ++ noc_div(&bw_temp, scale); ++ return bw_temp * 1000000; ++} ++#define MAX_BW(timebase) noc_bw_ceil(MAX_BW_FIELD, (timebase)) ++ ++/** ++ * Calculates ws hardware is using from register values ++ * ws returned is in nanoseconds ++ */ ++static uint32_t noc_ws(uint64_t bw, uint32_t sat, uint32_t qos_freq) ++{ ++ if (bw && qos_freq) { ++ uint32_t bwf = bw * qos_freq; ++ uint64_t scale = 1000000000000LL * BW_SCALE * ++ SAT_SCALE * sat; ++ noc_div(&scale, bwf); ++ MSM_BUS_DBG("NOC: Calculated ws: %llu\n", scale); ++ return scale; ++ } ++ ++ return 0; ++} ++#define MAX_WS(bw, timebase) noc_ws((bw), MAX_SAT_FIELD, (timebase)) ++ ++/* Calculate bandwidth field value for requested bandwidth */ ++static uint32_t noc_bw_field(uint64_t bw, uint32_t qos_freq) ++{ ++ uint32_t bw_field = 0; ++ ++ if (bw) { ++ uint32_t rem; ++ uint64_t bw_capped = min_t(uint64_t, bw, MAX_BW(qos_freq)); ++ uint64_t bwc = bw_capped * BW_SCALE; ++ uint64_t qf = 2 * qos_freq * 1000; ++ ++ rem = noc_div(&bwc, qf); ++ bw_field = (uint32_t)min_t(uint64_t, bwc, MAX_BW_FIELD); ++ } ++ ++ MSM_BUS_DBG("NOC: bw_field: %u\n", bw_field); ++ return bw_field; ++} ++ ++static uint32_t noc_sat_field(uint64_t bw, uint32_t ws, uint32_t qos_freq) ++{ ++ uint32_t sat_field = 0, win; ++ ++ if (bw) { ++ /* Limit to max bw and scale bw to 100 KB increments */ ++ uint64_t tbw, tscale; ++ uint64_t bw_scaled = min_t(uint64_t, bw, MAX_BW(qos_freq)); ++ uint32_t rem = noc_div(&bw_scaled, 100000); ++ ++ /** ++ * Calculate saturation from windows size. ++ * WS must be at least one arb period. ++ * Saturation must not exceed max field size ++ * ++ * Bandwidth is in 100KB increments ++ * Window size is in ns ++ * qos_freq is in KHz ++ */ ++ win = max(ws, 1000000 / qos_freq); ++ tbw = bw_scaled * win * qos_freq; ++ tscale = 10000000ULL * BW_SCALE * SAT_SCALE; ++ rem = noc_div(&tbw, tscale); ++ sat_field = (uint32_t)min_t(uint64_t, tbw, MAX_SAT_FIELD); ++ } ++ ++ MSM_BUS_DBG("NOC: sat_field: %d\n", sat_field); ++ return sat_field; ++} ++ ++static void noc_set_qos_mode(void __iomem *base, uint32_t qos_off, ++ uint32_t mport, uint32_t qos_delta, uint8_t mode, ++ uint8_t perm_mode) ++{ ++ if (mode < NOC_QOS_MODE_MAX && ++ ((1 << mode) & perm_mode)) { ++ uint32_t reg_val; ++ ++ reg_val = readl_relaxed(NOC_QOS_MODEn_ADDR(base, qos_off, ++ mport, qos_delta)) & NOC_QOS_MODEn_RMSK; ++ writel_relaxed(((reg_val & (~(NOC_QOS_MODEn_MODE_BMSK))) | ++ (mode & NOC_QOS_MODEn_MODE_BMSK)), ++ NOC_QOS_MODEn_ADDR(base, qos_off, mport, qos_delta)); ++ } ++ /* Ensure qos mode is set before exiting */ ++ wmb(); ++} ++ ++static void noc_set_qos_priority(void __iomem *base, uint32_t qos_off, ++ uint32_t mport, uint32_t qos_delta, ++ struct msm_bus_noc_qos_priority *priority) ++{ ++ uint32_t reg_val, val; ++ ++ reg_val = readl_relaxed(NOC_QOS_PRIORITYn_ADDR(base, qos_off, mport, ++ qos_delta)) & NOC_QOS_PRIORITYn_RMSK; ++ val = priority->p1 << NOC_QOS_PRIORITYn_P1_SHFT; ++ writel_relaxed(((reg_val & (~(NOC_QOS_PRIORITYn_P1_BMSK))) | ++ (val & NOC_QOS_PRIORITYn_P1_BMSK)), ++ NOC_QOS_PRIORITYn_ADDR(base, qos_off, mport, qos_delta)); ++ ++ reg_val = readl_relaxed(NOC_QOS_PRIORITYn_ADDR(base, qos_off, mport, ++ qos_delta)) ++ & NOC_QOS_PRIORITYn_RMSK; ++ writel_relaxed(((reg_val & (~(NOC_QOS_PRIORITYn_P0_BMSK))) | ++ (priority->p0 & NOC_QOS_PRIORITYn_P0_BMSK)), ++ NOC_QOS_PRIORITYn_ADDR(base, qos_off, mport, qos_delta)); ++ /* Ensure qos priority is set before exiting */ ++ wmb(); ++} ++ ++static void msm_bus_noc_set_qos_bw(void __iomem *base, uint32_t qos_off, ++ uint32_t qos_freq, uint32_t mport, uint32_t qos_delta, ++ uint8_t perm_mode, struct msm_bus_noc_qos_bw *qbw) ++{ ++ uint32_t reg_val, val, mode; ++ ++ if (!qos_freq) { ++ MSM_BUS_DBG("Zero QoS Freq\n"); ++ return; ++ } ++ ++ ++ /* If Limiter or Regulator modes are not supported, bw not available*/ ++ if (perm_mode & (NOC_QOS_PERM_MODE_LIMITER | ++ NOC_QOS_PERM_MODE_REGULATOR)) { ++ uint32_t bw_val = noc_bw_field(qbw->bw, qos_freq); ++ uint32_t sat_val = noc_sat_field(qbw->bw, qbw->ws, ++ qos_freq); ++ ++ MSM_BUS_DBG("NOC: BW: perm_mode: %d bw_val: %d, sat_val: %d\n", ++ perm_mode, bw_val, sat_val); ++ /* ++ * If in Limiter/Regulator mode, first go to fixed mode. ++ * Clear QoS accumulator ++ **/ ++ mode = readl_relaxed(NOC_QOS_MODEn_ADDR(base, qos_off, ++ mport, qos_delta)) & NOC_QOS_MODEn_MODE_BMSK; ++ if (mode == NOC_QOS_MODE_REGULATOR || mode == ++ NOC_QOS_MODE_LIMITER) { ++ reg_val = readl_relaxed(NOC_QOS_MODEn_ADDR( ++ base, qos_off, mport, qos_delta)); ++ val = NOC_QOS_MODE_FIXED; ++ writel_relaxed((reg_val & (~(NOC_QOS_MODEn_MODE_BMSK))) ++ | (val & NOC_QOS_MODEn_MODE_BMSK), ++ NOC_QOS_MODEn_ADDR(base, qos_off, mport, ++ qos_delta)); ++ } ++ ++ reg_val = readl_relaxed(NOC_QOS_BWn_ADDR(base, qos_off, mport, ++ qos_delta)); ++ val = bw_val << NOC_QOS_BWn_BW_SHFT; ++ writel_relaxed(((reg_val & (~(NOC_QOS_BWn_BW_BMSK))) | ++ (val & NOC_QOS_BWn_BW_BMSK)), ++ NOC_QOS_BWn_ADDR(base, qos_off, mport, qos_delta)); ++ ++ MSM_BUS_DBG("NOC: BW: Wrote value: 0x%x\n", ((reg_val & ++ (~NOC_QOS_BWn_BW_BMSK)) | (val & ++ NOC_QOS_BWn_BW_BMSK))); ++ ++ reg_val = readl_relaxed(NOC_QOS_SATn_ADDR(base, qos_off, ++ mport, qos_delta)); ++ val = sat_val << NOC_QOS_SATn_SAT_SHFT; ++ writel_relaxed(((reg_val & (~(NOC_QOS_SATn_SAT_BMSK))) | ++ (val & NOC_QOS_SATn_SAT_BMSK)), ++ NOC_QOS_SATn_ADDR(base, qos_off, mport, qos_delta)); ++ ++ MSM_BUS_DBG("NOC: SAT: Wrote value: 0x%x\n", ((reg_val & ++ (~NOC_QOS_SATn_SAT_BMSK)) | (val & ++ NOC_QOS_SATn_SAT_BMSK))); ++ ++ /* Set mode back to what it was initially */ ++ reg_val = readl_relaxed(NOC_QOS_MODEn_ADDR(base, qos_off, ++ mport, qos_delta)); ++ writel_relaxed((reg_val & (~(NOC_QOS_MODEn_MODE_BMSK))) ++ | (mode & NOC_QOS_MODEn_MODE_BMSK), ++ NOC_QOS_MODEn_ADDR(base, qos_off, mport, qos_delta)); ++ /* Ensure that all writes for bandwidth registers have ++ * completed before returning ++ */ ++ wmb(); ++ } ++} ++ ++uint8_t msm_bus_noc_get_qos_mode(void __iomem *base, uint32_t qos_off, ++ uint32_t mport, uint32_t qos_delta, uint32_t mode, uint32_t perm_mode) ++{ ++ if (NOC_QOS_MODES_ALL_PERM == perm_mode) ++ return readl_relaxed(NOC_QOS_MODEn_ADDR(base, qos_off, ++ mport, qos_delta)) & NOC_QOS_MODEn_MODE_BMSK; ++ else ++ return 31 - __CLZ(mode & ++ NOC_QOS_MODES_ALL_PERM); ++} ++ ++void msm_bus_noc_get_qos_priority(void __iomem *base, uint32_t qos_off, ++ uint32_t mport, uint32_t qos_delta, ++ struct msm_bus_noc_qos_priority *priority) ++{ ++ priority->p1 = (readl_relaxed(NOC_QOS_PRIORITYn_ADDR(base, qos_off, ++ mport, qos_delta)) & NOC_QOS_PRIORITYn_P1_BMSK) >> ++ NOC_QOS_PRIORITYn_P1_SHFT; ++ ++ priority->p0 = (readl_relaxed(NOC_QOS_PRIORITYn_ADDR(base, qos_off, ++ mport, qos_delta)) & NOC_QOS_PRIORITYn_P0_BMSK) >> ++ NOC_QOS_PRIORITYn_P0_SHFT; ++} ++ ++void msm_bus_noc_get_qos_bw(void __iomem *base, uint32_t qos_off, ++ uint32_t qos_freq, ++ uint32_t mport, uint32_t qos_delta, uint8_t perm_mode, ++ struct msm_bus_noc_qos_bw *qbw) ++{ ++ if (perm_mode & (NOC_QOS_PERM_MODE_LIMITER | ++ NOC_QOS_PERM_MODE_REGULATOR)) { ++ uint32_t bw_val = readl_relaxed(NOC_QOS_BWn_ADDR( ++ base, qos_off, mport, qos_delta)) & NOC_QOS_BWn_BW_BMSK; ++ uint32_t sat = readl_relaxed(NOC_QOS_SATn_ADDR( ++ base, qos_off, mport, qos_delta)) ++ & NOC_QOS_SATn_SAT_BMSK; ++ ++ qbw->bw = noc_bw(bw_val, qos_freq); ++ qbw->ws = noc_ws(qbw->bw, sat, qos_freq); ++ } else { ++ qbw->bw = 0; ++ qbw->ws = 0; ++ } ++} ++ ++static int msm_bus_noc_mas_init(struct msm_bus_noc_info *ninfo, ++ struct msm_bus_inode_info *info) ++{ ++ int i; ++ struct msm_bus_noc_qos_priority *prio; ++ prio = kzalloc(sizeof(struct msm_bus_noc_qos_priority), ++ GFP_KERNEL); ++ if (!prio) { ++ MSM_BUS_WARN("Couldn't alloc prio data for node: %d\n", ++ info->node_info->id); ++ return -ENOMEM; ++ } ++ ++ prio->read_prio = info->node_info->prio_rd; ++ prio->write_prio = info->node_info->prio_wr; ++ prio->p1 = info->node_info->prio1; ++ prio->p0 = info->node_info->prio0; ++ info->hw_data = (void *)prio; ++ ++ if (!info->node_info->qport) { ++ MSM_BUS_DBG("No QoS Ports to init\n"); ++ return 0; ++ } ++ ++ for (i = 0; i < info->node_info->num_mports; i++) { ++ if (info->node_info->mode != NOC_QOS_MODE_BYPASS) { ++ noc_set_qos_priority(ninfo->base, ninfo->qos_baseoffset, ++ info->node_info->qport[i], ninfo->qos_delta, ++ prio); ++ ++ if (info->node_info->mode != NOC_QOS_MODE_FIXED) { ++ struct msm_bus_noc_qos_bw qbw; ++ qbw.ws = info->node_info->ws; ++ qbw.bw = 0; ++ msm_bus_noc_set_qos_bw(ninfo->base, ++ ninfo->qos_baseoffset, ++ ninfo->qos_freq, info->node_info-> ++ qport[i], ninfo->qos_delta, ++ info->node_info->perm_mode, ++ &qbw); ++ } ++ } ++ ++ noc_set_qos_mode(ninfo->base, ninfo->qos_baseoffset, ++ info->node_info->qport[i], ninfo->qos_delta, ++ info->node_info->mode, ++ info->node_info->perm_mode); ++ } ++ ++ return 0; ++} ++ ++static void msm_bus_noc_node_init(void *hw_data, ++ struct msm_bus_inode_info *info) ++{ ++ struct msm_bus_noc_info *ninfo = ++ (struct msm_bus_noc_info *)hw_data; ++ ++ if (!IS_SLAVE(info->node_info->priv_id)) ++ if (info->node_info->hw_sel != MSM_BUS_RPM) ++ msm_bus_noc_mas_init(ninfo, info); ++} ++ ++static int msm_bus_noc_allocate_commit_data(struct msm_bus_fabric_registration ++ *fab_pdata, void **cdata, int ctx) ++{ ++ struct msm_bus_noc_commit **cd = (struct msm_bus_noc_commit **)cdata; ++ struct msm_bus_noc_info *ninfo = ++ (struct msm_bus_noc_info *)fab_pdata->hw_data; ++ ++ *cd = kzalloc(sizeof(struct msm_bus_noc_commit), GFP_KERNEL); ++ if (!*cd) { ++ MSM_BUS_DBG("Couldn't alloc mem for cdata\n"); ++ return -ENOMEM; ++ } ++ ++ (*cd)->mas = ninfo->cdata[ctx].mas; ++ (*cd)->slv = ninfo->cdata[ctx].slv; ++ ++ return 0; ++} ++ ++static void *msm_bus_noc_allocate_noc_data(struct platform_device *pdev, ++ struct msm_bus_fabric_registration *fab_pdata) ++{ ++ struct resource *noc_mem; ++ struct resource *noc_io; ++ struct msm_bus_noc_info *ninfo; ++ int i; ++ ++ ninfo = kzalloc(sizeof(struct msm_bus_noc_info), GFP_KERNEL); ++ if (!ninfo) { ++ MSM_BUS_DBG("Couldn't alloc mem for noc info\n"); ++ return NULL; ++ } ++ ++ ninfo->nmasters = fab_pdata->nmasters; ++ ninfo->nqos_masters = fab_pdata->nmasters; ++ ninfo->nslaves = fab_pdata->nslaves; ++ ninfo->qos_freq = fab_pdata->qos_freq; ++ ++ if (!fab_pdata->qos_baseoffset) ++ ninfo->qos_baseoffset = QOS_DEFAULT_BASEOFFSET; ++ else ++ ninfo->qos_baseoffset = fab_pdata->qos_baseoffset; ++ ++ if (!fab_pdata->qos_delta) ++ ninfo->qos_delta = QOS_DEFAULT_DELTA; ++ else ++ ninfo->qos_delta = fab_pdata->qos_delta; ++ ++ ninfo->mas_modes = kzalloc(sizeof(uint32_t) * fab_pdata->nmasters, ++ GFP_KERNEL); ++ if (!ninfo->mas_modes) { ++ MSM_BUS_DBG("Couldn't alloc mem for noc master-modes\n"); ++ kfree(ninfo); ++ return NULL; ++ } ++ ++ for (i = 0; i < NUM_CTX; i++) { ++ ninfo->cdata[i].mas = kzalloc(sizeof(struct ++ msm_bus_node_hw_info) * fab_pdata->nmasters * 2, ++ GFP_KERNEL); ++ if (!ninfo->cdata[i].mas) { ++ MSM_BUS_DBG("Couldn't alloc mem for noc master-bw\n"); ++ kfree(ninfo->mas_modes); ++ kfree(ninfo); ++ return NULL; ++ } ++ ++ ninfo->cdata[i].slv = kzalloc(sizeof(struct ++ msm_bus_node_hw_info) * fab_pdata->nslaves * 2, ++ GFP_KERNEL); ++ if (!ninfo->cdata[i].slv) { ++ MSM_BUS_DBG("Couldn't alloc mem for noc master-bw\n"); ++ kfree(ninfo->cdata[i].mas); ++ goto err; ++ } ++ } ++ ++ /* If it's a virtual fabric, don't get memory info */ ++ if (fab_pdata->virt) ++ goto skip_mem; ++ ++ noc_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!noc_mem && !fab_pdata->virt) { ++ MSM_BUS_ERR("Cannot get NoC Base address\n"); ++ goto err; ++ } ++ ++ noc_io = request_mem_region(noc_mem->start, ++ resource_size(noc_mem), pdev->name); ++ if (!noc_io) { ++ MSM_BUS_ERR("NoC memory unavailable\n"); ++ goto err; ++ } ++ ++ ninfo->base = ioremap(noc_mem->start, resource_size(noc_mem)); ++ if (!ninfo->base) { ++ MSM_BUS_ERR("IOremap failed for NoC!\n"); ++ release_mem_region(noc_mem->start, resource_size(noc_mem)); ++ goto err; ++ } ++ ++skip_mem: ++ fab_pdata->hw_data = (void *)ninfo; ++ return (void *)ninfo; ++ ++err: ++ kfree(ninfo->mas_modes); ++ kfree(ninfo); ++ return NULL; ++} ++ ++static void free_commit_data(void *cdata) ++{ ++ struct msm_bus_noc_commit *cd = (struct msm_bus_noc_commit *)cdata; ++ ++ kfree(cd->mas); ++ kfree(cd->slv); ++ kfree(cd); ++} ++ ++static bool msm_bus_noc_update_bw_reg(int mode) ++{ ++ bool ret = false; ++ ++ if ((mode == NOC_QOS_MODE_LIMITER) || ++ (mode == NOC_QOS_MODE_REGULATOR)) ++ ret = true; ++ ++ return ret; ++} ++ ++static void msm_bus_noc_update_bw(struct msm_bus_inode_info *hop, ++ struct msm_bus_inode_info *info, ++ struct msm_bus_fabric_registration *fab_pdata, ++ void *sel_cdata, int *master_tiers, ++ int64_t add_bw) ++{ ++ struct msm_bus_noc_info *ninfo; ++ struct msm_bus_noc_qos_bw qos_bw; ++ int i, ports; ++ int64_t bw; ++ struct msm_bus_noc_commit *sel_cd = ++ (struct msm_bus_noc_commit *)sel_cdata; ++ ++ ninfo = (struct msm_bus_noc_info *)fab_pdata->hw_data; ++ if (!ninfo->qos_freq) { ++ MSM_BUS_DBG("NOC: No qos frequency to update bw\n"); ++ return; ++ } ++ ++ if (info->node_info->num_mports == 0) { ++ MSM_BUS_DBG("NOC: Skip Master BW\n"); ++ goto skip_mas_bw; ++ } ++ ++ ports = info->node_info->num_mports; ++ bw = INTERLEAVED_BW(fab_pdata, add_bw, ports); ++ ++ MSM_BUS_DBG("NOC: Update bw for: %d: %lld\n", ++ info->node_info->priv_id, add_bw); ++ for (i = 0; i < ports; i++) { ++ sel_cd->mas[info->node_info->masterp[i]].bw += bw; ++ sel_cd->mas[info->node_info->masterp[i]].hw_id = ++ info->node_info->mas_hw_id; ++ MSM_BUS_DBG("NOC: Update mas_bw: ID: %d, BW: %llu ports:%d\n", ++ info->node_info->priv_id, ++ sel_cd->mas[info->node_info->masterp[i]].bw, ++ ports); ++ /* Check if info is a shared master. ++ * If it is, mark it dirty ++ * If it isn't, then set QOS Bandwidth ++ **/ ++ if (info->node_info->hw_sel == MSM_BUS_RPM) ++ sel_cd->mas[info->node_info->masterp[i]].dirty = 1; ++ else { ++ if (!info->node_info->qport) { ++ MSM_BUS_DBG("No qos ports to update!\n"); ++ break; ++ } ++ ++ if (!(info->node_info->mode == NOC_QOS_MODE_REGULATOR) ++ || (info->node_info->mode == ++ NOC_QOS_MODE_LIMITER)) { ++ MSM_BUS_DBG("Skip QoS reg programming\n"); ++ break; ++ } ++ qos_bw.bw = sel_cd->mas[info->node_info->masterp[i]]. ++ bw; ++ qos_bw.ws = info->node_info->ws; ++ msm_bus_noc_set_qos_bw(ninfo->base, ++ ninfo->qos_baseoffset, ++ ninfo->qos_freq, ++ info->node_info->qport[i], ninfo->qos_delta, ++ info->node_info->perm_mode, &qos_bw); ++ MSM_BUS_DBG("NOC: QoS: Update mas_bw: ws: %u\n", ++ qos_bw.ws); ++ } ++ } ++ ++skip_mas_bw: ++ ports = hop->node_info->num_sports; ++ for (i = 0; i < ports; i++) { ++ sel_cd->slv[hop->node_info->slavep[i]].bw += add_bw; ++ sel_cd->slv[hop->node_info->slavep[i]].hw_id = ++ hop->node_info->slv_hw_id; ++ MSM_BUS_DBG("NOC: Update slave_bw for ID: %d -> %llu\n", ++ hop->node_info->priv_id, ++ sel_cd->slv[hop->node_info->slavep[i]].bw); ++ MSM_BUS_DBG("NOC: Update slave_bw for hw_id: %d, index: %d\n", ++ hop->node_info->slv_hw_id, hop->node_info->slavep[i]); ++ /* Check if hop is a shared slave. ++ * If it is, mark it dirty ++ * If it isn't, then nothing to be done as the ++ * slaves are in bypass mode. ++ **/ ++ if (hop->node_info->hw_sel == MSM_BUS_RPM) ++ sel_cd->slv[hop->node_info->slavep[i]].dirty = 1; ++ } ++} ++ ++static int msm_bus_noc_commit(struct msm_bus_fabric_registration ++ *fab_pdata, void *hw_data, void **cdata) ++{ ++ MSM_BUS_DBG("\nReached NOC Commit\n"); ++ msm_bus_remote_hw_commit(fab_pdata, hw_data, cdata); ++ return 0; ++} ++ ++static int msm_bus_noc_port_halt(uint32_t haltid, uint8_t mport) ++{ ++ return 0; ++} ++ ++static int msm_bus_noc_port_unhalt(uint32_t haltid, uint8_t mport) ++{ ++ return 0; ++} ++ ++static int msm_bus_noc_qos_init(struct msm_bus_node_device_type *info, ++ void __iomem *qos_base, ++ uint32_t qos_off, uint32_t qos_delta, ++ uint32_t qos_freq) ++{ ++ struct msm_bus_noc_qos_priority prio; ++ int ret = 0; ++ int i; ++ ++ prio.p1 = info->node_info->qos_params.prio1; ++ prio.p0 = info->node_info->qos_params.prio0; ++ ++ if (!info->node_info->qport) { ++ MSM_BUS_DBG("No QoS Ports to init\n"); ++ ret = 0; ++ goto err_qos_init; ++ } ++ ++ for (i = 0; i < info->node_info->num_qports; i++) { ++ if (info->node_info->qos_params.mode != NOC_QOS_MODE_BYPASS) { ++ noc_set_qos_priority(qos_base, qos_off, ++ info->node_info->qport[i], qos_delta, ++ &prio); ++ ++ if (info->node_info->qos_params.mode != ++ NOC_QOS_MODE_FIXED) { ++ struct msm_bus_noc_qos_bw qbw; ++ qbw.ws = info->node_info->qos_params.ws; ++ qbw.bw = 0; ++ msm_bus_noc_set_qos_bw(qos_base, qos_off, ++ qos_freq, ++ info->node_info->qport[i], ++ qos_delta, ++ info->node_info->qos_params.mode, ++ &qbw); ++ } ++ } ++ ++ noc_set_qos_mode(qos_base, qos_off, info->node_info->qport[i], ++ qos_delta, info->node_info->qos_params.mode, ++ (1 << info->node_info->qos_params.mode)); ++ } ++err_qos_init: ++ return ret; ++} ++ ++static int msm_bus_noc_set_bw(struct msm_bus_node_device_type *dev, ++ void __iomem *qos_base, ++ uint32_t qos_off, uint32_t qos_delta, ++ uint32_t qos_freq) ++{ ++ int ret = 0; ++ uint64_t bw = 0; ++ int i; ++ struct msm_bus_node_info_type *info = dev->node_info; ++ ++ if (info && info->num_qports && ++ ((info->qos_params.mode == NOC_QOS_MODE_REGULATOR) || ++ (info->qos_params.mode == ++ NOC_QOS_MODE_LIMITER))) { ++ struct msm_bus_noc_qos_bw qos_bw; ++ ++ bw = msm_bus_div64(info->num_qports, ++ dev->node_ab.ab[DUAL_CTX]); ++ ++ for (i = 0; i < info->num_qports; i++) { ++ if (!info->qport) { ++ MSM_BUS_DBG("No qos ports to update!\n"); ++ break; ++ } ++ ++ qos_bw.bw = bw; ++ qos_bw.ws = info->qos_params.ws; ++ msm_bus_noc_set_qos_bw(qos_base, qos_off, qos_freq, ++ info->qport[i], qos_delta, ++ info->qos_params.mode, &qos_bw); ++ MSM_BUS_DBG("NOC: QoS: Update mas_bw: ws: %u\n", ++ qos_bw.ws); ++ } ++ } ++ return ret; ++} ++int msm_bus_noc_hw_init(struct msm_bus_fabric_registration *pdata, ++ struct msm_bus_hw_algorithm *hw_algo) ++{ ++ /* Set interleaving to true by default */ ++ pdata->il_flag = true; ++ hw_algo->allocate_commit_data = msm_bus_noc_allocate_commit_data; ++ hw_algo->allocate_hw_data = msm_bus_noc_allocate_noc_data; ++ hw_algo->node_init = msm_bus_noc_node_init; ++ hw_algo->free_commit_data = free_commit_data; ++ hw_algo->update_bw = msm_bus_noc_update_bw; ++ hw_algo->commit = msm_bus_noc_commit; ++ hw_algo->port_halt = msm_bus_noc_port_halt; ++ hw_algo->port_unhalt = msm_bus_noc_port_unhalt; ++ hw_algo->update_bw_reg = msm_bus_noc_update_bw_reg; ++ hw_algo->config_master = NULL; ++ hw_algo->config_limiter = NULL; ++ ++ return 0; ++} ++ ++int msm_bus_noc_set_ops(struct msm_bus_node_device_type *bus_dev) ++{ ++ if (!bus_dev) ++ return -ENODEV; ++ else { ++ bus_dev->fabdev->noc_ops.qos_init = msm_bus_noc_qos_init; ++ bus_dev->fabdev->noc_ops.set_bw = msm_bus_noc_set_bw; ++ bus_dev->fabdev->noc_ops.limit_mport = NULL; ++ bus_dev->fabdev->noc_ops.update_bw_reg = ++ msm_bus_noc_update_bw_reg; ++ } ++ return 0; ++} ++EXPORT_SYMBOL(msm_bus_noc_set_ops); +--- /dev/null ++++ b/drivers/bus/msm_bus/msm_bus_noc.h +@@ -0,0 +1,76 @@ ++/* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#ifndef _ARCH_ARM_MACH_MSM_BUS_BIMC_H ++#define _ARCH_ARM_MACH_MSM_BUS_BIMC_H ++ ++enum msm_bus_noc_qos_mode_type { ++ NOC_QOS_MODE_FIXED = 0, ++ NOC_QOS_MODE_LIMITER, ++ NOC_QOS_MODE_BYPASS, ++ NOC_QOS_MODE_REGULATOR, ++ NOC_QOS_MODE_MAX, ++}; ++ ++enum msm_bus_noc_qos_mode_perm { ++ NOC_QOS_PERM_MODE_FIXED = (1 << NOC_QOS_MODE_FIXED), ++ NOC_QOS_PERM_MODE_LIMITER = (1 << NOC_QOS_MODE_LIMITER), ++ NOC_QOS_PERM_MODE_BYPASS = (1 << NOC_QOS_MODE_BYPASS), ++ NOC_QOS_PERM_MODE_REGULATOR = (1 << NOC_QOS_MODE_REGULATOR), ++}; ++ ++#define NOC_QOS_MODES_ALL_PERM (NOC_QOS_PERM_MODE_FIXED | \ ++ NOC_QOS_PERM_MODE_LIMITER | NOC_QOS_PERM_MODE_BYPASS | \ ++ NOC_QOS_PERM_MODE_REGULATOR) ++ ++struct msm_bus_noc_commit { ++ struct msm_bus_node_hw_info *mas; ++ struct msm_bus_node_hw_info *slv; ++}; ++ ++struct msm_bus_noc_info { ++ void __iomem *base; ++ uint32_t base_addr; ++ uint32_t nmasters; ++ uint32_t nqos_masters; ++ uint32_t nslaves; ++ uint32_t qos_freq; /* QOS Clock in KHz */ ++ uint32_t qos_baseoffset; ++ uint32_t qos_delta; ++ uint32_t *mas_modes; ++ struct msm_bus_noc_commit cdata[NUM_CTX]; ++}; ++ ++struct msm_bus_noc_qos_priority { ++ uint32_t high_prio; ++ uint32_t low_prio; ++ uint32_t read_prio; ++ uint32_t write_prio; ++ uint32_t p1; ++ uint32_t p0; ++}; ++ ++struct msm_bus_noc_qos_bw { ++ uint64_t bw; /* Bandwidth in bytes per second */ ++ uint32_t ws; /* Window size in nano seconds */ ++}; ++ ++void msm_bus_noc_init(struct msm_bus_noc_info *ninfo); ++uint8_t msm_bus_noc_get_qos_mode(void __iomem *base, uint32_t qos_off, ++ uint32_t mport, uint32_t qos_delta, uint32_t mode, uint32_t perm_mode); ++void msm_bus_noc_get_qos_priority(void __iomem *base, uint32_t qos_off, ++ uint32_t mport, uint32_t qos_delta, ++ struct msm_bus_noc_qos_priority *qprio); ++void msm_bus_noc_get_qos_bw(void __iomem *base, uint32_t qos_off, ++ uint32_t qos_freq, uint32_t mport, uint32_t qos_delta, ++ uint8_t perm_mode, struct msm_bus_noc_qos_bw *qbw); ++#endif /*_ARCH_ARM_MACH_MSM_BUS_NOC_H */ +--- /dev/null ++++ b/drivers/bus/msm_bus/msm_bus_of.c +@@ -0,0 +1,705 @@ ++/* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#define pr_fmt(fmt) "AXI: %s(): " fmt, __func__ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include "msm-bus.h" ++#include "msm-bus-board.h" ++#include "msm_bus_core.h" ++ ++static const char * const hw_sel_name[] = {"RPM", "NoC", "BIMC", NULL}; ++static const char * const mode_sel_name[] = {"Fixed", "Limiter", "Bypass", ++ "Regulator", NULL}; ++ ++static int get_num(const char *const str[], const char *name) ++{ ++ int i = 0; ++ ++ do { ++ if (!strcmp(name, str[i])) ++ return i; ++ ++ i++; ++ } while (str[i] != NULL); ++ ++ pr_err("Error: string %s not found\n", name); ++ return -EINVAL; ++} ++ ++#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_MSM_BUS_SCALING) ++static struct msm_bus_scale_pdata *get_pdata(struct platform_device *pdev, ++ struct device_node *of_node) ++{ ++ struct msm_bus_scale_pdata *pdata = NULL; ++ struct msm_bus_paths *usecase = NULL; ++ int i = 0, j, ret, num_usecases = 0, num_paths, len; ++ const uint32_t *vec_arr = NULL; ++ bool mem_err = false; ++ ++ if (!pdev) { ++ pr_err("Error: Null Platform device\n"); ++ return NULL; ++ } ++ ++ pdata = devm_kzalloc(&pdev->dev, sizeof(struct msm_bus_scale_pdata), ++ GFP_KERNEL); ++ if (!pdata) { ++ pr_err("Error: Memory allocation for pdata failed\n"); ++ mem_err = true; ++ goto err; ++ } ++ ++ ret = of_property_read_string(of_node, "qcom,msm-bus,name", ++ &pdata->name); ++ if (ret) { ++ pr_err("Error: Client name not found\n"); ++ goto err; ++ } ++ ++ ret = of_property_read_u32(of_node, "qcom,msm-bus,num-cases", ++ &num_usecases); ++ if (ret) { ++ pr_err("Error: num-usecases not found\n"); ++ goto err; ++ } ++ ++ pdata->num_usecases = num_usecases; ++ ++ if (of_property_read_bool(of_node, "qcom,msm-bus,active-only")) ++ pdata->active_only = 1; ++ else { ++ pr_debug("active_only flag absent.\n"); ++ pr_debug("Using dual context by default\n"); ++ } ++ ++ usecase = devm_kzalloc(&pdev->dev, (sizeof(struct msm_bus_paths) * ++ pdata->num_usecases), GFP_KERNEL); ++ if (!usecase) { ++ pr_err("Error: Memory allocation for paths failed\n"); ++ mem_err = true; ++ goto err; ++ } ++ ++ ret = of_property_read_u32(of_node, "qcom,msm-bus,num-paths", ++ &num_paths); ++ if (ret) { ++ pr_err("Error: num_paths not found\n"); ++ goto err; ++ } ++ ++ vec_arr = of_get_property(of_node, "qcom,msm-bus,vectors-KBps", &len); ++ if (vec_arr == NULL) { ++ pr_err("Error: Vector array not found\n"); ++ goto err; ++ } ++ ++ if (len != num_usecases * num_paths * sizeof(uint32_t) * 4) { ++ pr_err("Error: Length-error on getting vectors\n"); ++ goto err; ++ } ++ ++ for (i = 0; i < num_usecases; i++) { ++ usecase[i].num_paths = num_paths; ++ usecase[i].vectors = devm_kzalloc(&pdev->dev, num_paths * ++ sizeof(struct msm_bus_vectors), GFP_KERNEL); ++ if (!usecase[i].vectors) { ++ mem_err = true; ++ pr_err("Error: Mem alloc failure in vectors\n"); ++ goto err; ++ } ++ ++ for (j = 0; j < num_paths; j++) { ++ int index = ((i * num_paths) + j) * 4; ++ usecase[i].vectors[j].src = be32_to_cpu(vec_arr[index]); ++ usecase[i].vectors[j].dst = ++ be32_to_cpu(vec_arr[index + 1]); ++ usecase[i].vectors[j].ab = (uint64_t) ++ KBTOB(be32_to_cpu(vec_arr[index + 2])); ++ usecase[i].vectors[j].ib = (uint64_t) ++ KBTOB(be32_to_cpu(vec_arr[index + 3])); ++ } ++ } ++ ++ pdata->usecase = usecase; ++ return pdata; ++err: ++ if (mem_err) { ++ for (; i > 0; i--) ++ kfree(usecase[i-1].vectors); ++ ++ kfree(usecase); ++ kfree(pdata); ++ } ++ ++ return NULL; ++} ++ ++/** ++ * msm_bus_cl_get_pdata() - Generate bus client data from device tree ++ * provided by clients. ++ * ++ * of_node: Device tree node to extract information from ++ * ++ * The function returns a valid pointer to the allocated bus-scale-pdata ++ * if the vectors were correctly read from the client's device node. ++ * Any error in reading or parsing the device node will return NULL ++ * to the caller. ++ */ ++struct msm_bus_scale_pdata *msm_bus_cl_get_pdata(struct platform_device *pdev) ++{ ++ struct device_node *of_node; ++ struct msm_bus_scale_pdata *pdata = NULL; ++ ++ if (!pdev) { ++ pr_err("Error: Null Platform device\n"); ++ return NULL; ++ } ++ ++ of_node = pdev->dev.of_node; ++ pdata = get_pdata(pdev, of_node); ++ if (!pdata) { ++ pr_err("client has to provide missing entry for successful registration\n"); ++ return NULL; ++ } ++ ++ return pdata; ++} ++EXPORT_SYMBOL(msm_bus_cl_get_pdata); ++ ++/** ++ * msm_bus_cl_pdata_from_node() - Generate bus client data from device tree ++ * node provided by clients. This function should be used when a client ++ * driver needs to register multiple bus-clients from a single device-tree ++ * node associated with the platform-device. ++ * ++ * of_node: The subnode containing information about the bus scaling ++ * data ++ * ++ * pdev: Platform device associated with the device-tree node ++ * ++ * The function returns a valid pointer to the allocated bus-scale-pdata ++ * if the vectors were correctly read from the client's device node. ++ * Any error in reading or parsing the device node will return NULL ++ * to the caller. ++ */ ++struct msm_bus_scale_pdata *msm_bus_pdata_from_node( ++ struct platform_device *pdev, struct device_node *of_node) ++{ ++ struct msm_bus_scale_pdata *pdata = NULL; ++ ++ if (!pdev) { ++ pr_err("Error: Null Platform device\n"); ++ return NULL; ++ } ++ ++ if (!of_node) { ++ pr_err("Error: Null of_node passed to bus driver\n"); ++ return NULL; ++ } ++ ++ pdata = get_pdata(pdev, of_node); ++ if (!pdata) { ++ pr_err("client has to provide missing entry for successful registration\n"); ++ return NULL; ++ } ++ ++ return pdata; ++} ++EXPORT_SYMBOL(msm_bus_pdata_from_node); ++ ++/** ++ * msm_bus_cl_clear_pdata() - Clear pdata allocated from device-tree ++ * of_node: Device tree node to extract information from ++ */ ++void msm_bus_cl_clear_pdata(struct msm_bus_scale_pdata *pdata) ++{ ++ int i; ++ ++ for (i = 0; i < pdata->num_usecases; i++) ++ kfree(pdata->usecase[i].vectors); ++ ++ kfree(pdata->usecase); ++ kfree(pdata); ++} ++EXPORT_SYMBOL(msm_bus_cl_clear_pdata); ++#endif ++ ++static int *get_arr(struct platform_device *pdev, ++ const struct device_node *node, const char *prop, ++ int *nports) ++{ ++ int size = 0, ret; ++ int *arr = NULL; ++ ++ if (of_get_property(node, prop, &size)) { ++ *nports = size / sizeof(int); ++ } else { ++ pr_debug("Property %s not available\n", prop); ++ *nports = 0; ++ return NULL; ++ } ++ ++ if (!size) { ++ *nports = 0; ++ return NULL; ++ } ++ ++ arr = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); ++ if (ZERO_OR_NULL_PTR(arr)) { ++ pr_err("Error: Failed to alloc mem for %s\n", prop); ++ return NULL; ++ } ++ ++ ret = of_property_read_u32_array(node, prop, (u32 *)arr, *nports); ++ if (ret) { ++ pr_err("Error in reading property: %s\n", prop); ++ goto err; ++ } ++ ++ return arr; ++err: ++ devm_kfree(&pdev->dev, arr); ++ return NULL; ++} ++ ++static u64 *get_th_params(struct platform_device *pdev, ++ const struct device_node *node, const char *prop, ++ int *nports) ++{ ++ int size = 0, ret; ++ u64 *ret_arr = NULL; ++ int *arr = NULL; ++ int i; ++ ++ if (of_get_property(node, prop, &size)) { ++ *nports = size / sizeof(int); ++ } else { ++ pr_debug("Property %s not available\n", prop); ++ *nports = 0; ++ return NULL; ++ } ++ ++ if (!size) { ++ *nports = 0; ++ return NULL; ++ } ++ ++ ret_arr = devm_kzalloc(&pdev->dev, (*nports * sizeof(u64)), ++ GFP_KERNEL); ++ if (ZERO_OR_NULL_PTR(ret_arr)) { ++ pr_err("Error: Failed to alloc mem for ret arr %s\n", prop); ++ return NULL; ++ } ++ ++ arr = kzalloc(size, GFP_KERNEL); ++ if ((ZERO_OR_NULL_PTR(arr))) { ++ pr_err("Error: Failed to alloc temp mem for %s\n", prop); ++ return NULL; ++ } ++ ++ ret = of_property_read_u32_array(node, prop, (u32 *)arr, *nports); ++ if (ret) { ++ pr_err("Error in reading property: %s\n", prop); ++ goto err; ++ } ++ ++ for (i = 0; i < *nports; i++) ++ ret_arr[i] = (uint64_t)KBTOB(arr[i]); ++ ++ MSM_BUS_DBG("%s: num entries %d prop %s", __func__, *nports, prop); ++ ++ for (i = 0; i < *nports; i++) ++ MSM_BUS_DBG("Th %d val %llu", i, ret_arr[i]); ++ ++ kfree(arr); ++ return ret_arr; ++err: ++ kfree(arr); ++ devm_kfree(&pdev->dev, ret_arr); ++ return NULL; ++} ++ ++static struct msm_bus_node_info *get_nodes(struct device_node *of_node, ++ struct platform_device *pdev, ++ struct msm_bus_fabric_registration *pdata) ++{ ++ struct msm_bus_node_info *info; ++ struct device_node *child_node = NULL; ++ int i = 0, ret; ++ int num_bw = 0; ++ u32 temp; ++ ++ for_each_child_of_node(of_node, child_node) { ++ i++; ++ } ++ ++ pdata->len = i; ++ info = (struct msm_bus_node_info *) ++ devm_kzalloc(&pdev->dev, sizeof(struct msm_bus_node_info) * ++ pdata->len, GFP_KERNEL); ++ if (ZERO_OR_NULL_PTR(info)) { ++ pr_err("Failed to alloc memory for nodes: %d\n", pdata->len); ++ goto err; ++ } ++ ++ i = 0; ++ child_node = NULL; ++ for_each_child_of_node(of_node, child_node) { ++ const char *sel_str; ++ ++ ret = of_property_read_string(child_node, "label", ++ &info[i].name); ++ if (ret) ++ pr_err("Error reading node label\n"); ++ ++ ret = of_property_read_u32(child_node, "cell-id", &info[i].id); ++ if (ret) { ++ pr_err("Error reading node id\n"); ++ goto err; ++ } ++ ++ if (of_property_read_bool(child_node, "qcom,gateway")) ++ info[i].gateway = 1; ++ ++ of_property_read_u32(child_node, "qcom,mas-hw-id", ++ &info[i].mas_hw_id); ++ ++ of_property_read_u32(child_node, "qcom,slv-hw-id", ++ &info[i].slv_hw_id); ++ info[i].masterp = get_arr(pdev, child_node, ++ "qcom,masterp", &info[i].num_mports); ++ /* No need to store number of qports */ ++ info[i].qport = get_arr(pdev, child_node, ++ "qcom,qport", &ret); ++ pdata->nmasters += info[i].num_mports; ++ ++ ++ info[i].slavep = get_arr(pdev, child_node, ++ "qcom,slavep", &info[i].num_sports); ++ pdata->nslaves += info[i].num_sports; ++ ++ ++ info[i].tier = get_arr(pdev, child_node, ++ "qcom,tier", &info[i].num_tiers); ++ ++ if (of_property_read_bool(child_node, "qcom,ahb")) ++ info[i].ahb = 1; ++ ++ ret = of_property_read_string(child_node, "qcom,hw-sel", ++ &sel_str); ++ if (ret) ++ info[i].hw_sel = 0; ++ else { ++ ret = get_num(hw_sel_name, sel_str); ++ if (ret < 0) { ++ pr_err("Invalid hw-sel\n"); ++ goto err; ++ } ++ ++ info[i].hw_sel = ret; ++ } ++ ++ of_property_read_u32(child_node, "qcom,buswidth", ++ &info[i].buswidth); ++ of_property_read_u32(child_node, "qcom,ws", &info[i].ws); ++ ++ info[i].dual_conf = ++ of_property_read_bool(child_node, "qcom,dual-conf"); ++ ++ ++ info[i].th = get_th_params(pdev, child_node, "qcom,thresh", ++ &info[i].num_thresh); ++ ++ info[i].bimc_bw = get_th_params(pdev, child_node, ++ "qcom,bimc,bw", &num_bw); ++ ++ if (num_bw != info[i].num_thresh) { ++ pr_err("%s:num_bw %d must equal num_thresh %d", ++ __func__, num_bw, info[i].num_thresh); ++ pr_err("%s:Err setting up dual conf for %s", ++ __func__, info[i].name); ++ goto err; ++ } ++ ++ of_property_read_u32(child_node, "qcom,bimc,gp", ++ &info[i].bimc_gp); ++ of_property_read_u32(child_node, "qcom,bimc,thmp", ++ &info[i].bimc_thmp); ++ ++ ret = of_property_read_string(child_node, "qcom,mode-thresh", ++ &sel_str); ++ if (ret) ++ info[i].mode_thresh = 0; ++ else { ++ ret = get_num(mode_sel_name, sel_str); ++ if (ret < 0) { ++ pr_err("Unknown mode :%s\n", sel_str); ++ goto err; ++ } ++ ++ info[i].mode_thresh = ret; ++ MSM_BUS_DBG("AXI: THreshold mode set: %d\n", ++ info[i].mode_thresh); ++ } ++ ++ ret = of_property_read_string(child_node, "qcom,mode", ++ &sel_str); ++ ++ if (ret) ++ info[i].mode = 0; ++ else { ++ ret = get_num(mode_sel_name, sel_str); ++ if (ret < 0) { ++ pr_err("Unknown mode :%s\n", sel_str); ++ goto err; ++ } ++ ++ info[i].mode = ret; ++ } ++ ++ info[i].nr_lim = ++ of_property_read_bool(child_node, "qcom,nr-lim"); ++ ++ ret = of_property_read_u32(child_node, "qcom,ff", ++ &info[i].ff); ++ if (ret) { ++ pr_debug("fudge factor not present %d", info[i].id); ++ info[i].ff = 0; ++ } ++ ++ ret = of_property_read_u32(child_node, "qcom,floor-bw", ++ &temp); ++ if (ret) { ++ pr_debug("fabdev floor bw not present %d", info[i].id); ++ info[i].floor_bw = 0; ++ } else { ++ info[i].floor_bw = KBTOB(temp); ++ } ++ ++ info[i].rt_mas = ++ of_property_read_bool(child_node, "qcom,rt-mas"); ++ ++ ret = of_property_read_string(child_node, "qcom,perm-mode", ++ &sel_str); ++ if (ret) ++ info[i].perm_mode = 0; ++ else { ++ ret = get_num(mode_sel_name, sel_str); ++ if (ret < 0) ++ goto err; ++ ++ info[i].perm_mode = 1 << ret; ++ } ++ ++ of_property_read_u32(child_node, "qcom,prio-lvl", ++ &info[i].prio_lvl); ++ of_property_read_u32(child_node, "qcom,prio-rd", ++ &info[i].prio_rd); ++ of_property_read_u32(child_node, "qcom,prio-wr", ++ &info[i].prio_wr); ++ of_property_read_u32(child_node, "qcom,prio0", &info[i].prio0); ++ of_property_read_u32(child_node, "qcom,prio1", &info[i].prio1); ++ ret = of_property_read_string(child_node, "qcom,slaveclk-dual", ++ &info[i].slaveclk[DUAL_CTX]); ++ if (!ret) ++ pr_debug("Got slaveclk_dual: %s\n", ++ info[i].slaveclk[DUAL_CTX]); ++ else ++ info[i].slaveclk[DUAL_CTX] = NULL; ++ ++ ret = of_property_read_string(child_node, ++ "qcom,slaveclk-active", &info[i].slaveclk[ACTIVE_CTX]); ++ if (!ret) ++ pr_debug("Got slaveclk_active\n"); ++ else ++ info[i].slaveclk[ACTIVE_CTX] = NULL; ++ ++ ret = of_property_read_string(child_node, "qcom,memclk-dual", ++ &info[i].memclk[DUAL_CTX]); ++ if (!ret) ++ pr_debug("Got memclk_dual\n"); ++ else ++ info[i].memclk[DUAL_CTX] = NULL; ++ ++ ret = of_property_read_string(child_node, "qcom,memclk-active", ++ &info[i].memclk[ACTIVE_CTX]); ++ if (!ret) ++ pr_debug("Got memclk_active\n"); ++ else ++ info[i].memclk[ACTIVE_CTX] = NULL; ++ ++ ret = of_property_read_string(child_node, "qcom,iface-clk-node", ++ &info[i].iface_clk_node); ++ if (!ret) ++ pr_debug("Got iface_clk_node\n"); ++ else ++ info[i].iface_clk_node = NULL; ++ ++ pr_debug("Node name: %s\n", info[i].name); ++ of_node_put(child_node); ++ i++; ++ } ++ ++ pr_debug("Bus %d added: %d masters\n", pdata->id, pdata->nmasters); ++ pr_debug("Bus %d added: %d slaves\n", pdata->id, pdata->nslaves); ++ return info; ++err: ++ return NULL; ++} ++ ++void msm_bus_of_get_nfab(struct platform_device *pdev, ++ struct msm_bus_fabric_registration *pdata) ++{ ++ struct device_node *of_node; ++ int ret, nfab = 0; ++ ++ if (!pdev) { ++ pr_err("Error: Null platform device\n"); ++ return; ++ } ++ ++ of_node = pdev->dev.of_node; ++ ret = of_property_read_u32(of_node, "qcom,nfab", ++ &nfab); ++ if (!ret) ++ pr_debug("Fab_of: Read number of buses: %u\n", nfab); ++ ++ msm_bus_board_set_nfab(pdata, nfab); ++} ++ ++struct msm_bus_fabric_registration ++ *msm_bus_of_get_fab_data(struct platform_device *pdev) ++{ ++ struct device_node *of_node; ++ struct msm_bus_fabric_registration *pdata; ++ bool mem_err = false; ++ int ret = 0; ++ const char *sel_str; ++ u32 temp; ++ ++ if (!pdev) { ++ pr_err("Error: Null platform device\n"); ++ return NULL; ++ } ++ ++ of_node = pdev->dev.of_node; ++ pdata = devm_kzalloc(&pdev->dev, ++ sizeof(struct msm_bus_fabric_registration), GFP_KERNEL); ++ if (!pdata) { ++ pr_err("Error: Memory allocation for pdata failed\n"); ++ mem_err = true; ++ goto err; ++ } ++ ++ ret = of_property_read_string(of_node, "label", &pdata->name); ++ if (ret) { ++ pr_err("Error: label not found\n"); ++ goto err; ++ } ++ pr_debug("Fab_of: Read name: %s\n", pdata->name); ++ ++ ret = of_property_read_u32(of_node, "cell-id", ++ &pdata->id); ++ if (ret) { ++ pr_err("Error: num-usecases not found\n"); ++ goto err; ++ } ++ pr_debug("Fab_of: Read id: %u\n", pdata->id); ++ ++ if (of_property_read_bool(of_node, "qcom,ahb")) ++ pdata->ahb = 1; ++ ++ ret = of_property_read_string(of_node, "qcom,fabclk-dual", ++ &pdata->fabclk[DUAL_CTX]); ++ if (ret) { ++ pr_debug("fabclk_dual not available\n"); ++ pdata->fabclk[DUAL_CTX] = NULL; ++ } else ++ pr_debug("Fab_of: Read clk dual ctx: %s\n", ++ pdata->fabclk[DUAL_CTX]); ++ ret = of_property_read_string(of_node, "qcom,fabclk-active", ++ &pdata->fabclk[ACTIVE_CTX]); ++ if (ret) { ++ pr_debug("Error: fabclk_active not available\n"); ++ pdata->fabclk[ACTIVE_CTX] = NULL; ++ } else ++ pr_debug("Fab_of: Read clk act ctx: %s\n", ++ pdata->fabclk[ACTIVE_CTX]); ++ ++ ret = of_property_read_u32(of_node, "qcom,ntieredslaves", ++ &pdata->ntieredslaves); ++ if (ret) { ++ pr_err("Error: ntieredslaves not found\n"); ++ goto err; ++ } ++ ++ ret = of_property_read_u32(of_node, "qcom,qos-freq", &pdata->qos_freq); ++ if (ret) ++ pr_debug("qos_freq not available\n"); ++ ++ ret = of_property_read_string(of_node, "qcom,hw-sel", &sel_str); ++ if (ret) { ++ pr_err("Error: hw_sel not found\n"); ++ goto err; ++ } else { ++ ret = get_num(hw_sel_name, sel_str); ++ if (ret < 0) ++ goto err; ++ ++ pdata->hw_sel = ret; ++ } ++ ++ if (of_property_read_bool(of_node, "qcom,virt")) ++ pdata->virt = true; ++ ++ ret = of_property_read_u32(of_node, "qcom,qos-baseoffset", ++ &pdata->qos_baseoffset); ++ if (ret) ++ pr_debug("%s:qos_baseoffset not available\n", __func__); ++ ++ ret = of_property_read_u32(of_node, "qcom,qos-delta", ++ &pdata->qos_delta); ++ if (ret) ++ pr_debug("%s:qos_delta not available\n", __func__); ++ ++ if (of_property_read_bool(of_node, "qcom,rpm-en")) ++ pdata->rpm_enabled = 1; ++ ++ ret = of_property_read_u32(of_node, "qcom,nr-lim-thresh", ++ &temp); ++ ++ if (ret) { ++ pr_err("nr-lim threshold not specified"); ++ pdata->nr_lim_thresh = 0; ++ } else { ++ pdata->nr_lim_thresh = KBTOB(temp); ++ } ++ ++ ret = of_property_read_u32(of_node, "qcom,eff-fact", ++ &pdata->eff_fact); ++ if (ret) { ++ pr_err("Fab eff-factor not present"); ++ pdata->eff_fact = 0; ++ } ++ ++ pdata->info = get_nodes(of_node, pdev, pdata); ++ return pdata; ++err: ++ return NULL; ++} ++EXPORT_SYMBOL(msm_bus_of_get_fab_data); +--- /dev/null ++++ b/drivers/bus/msm_bus/msm_bus_of_adhoc.c +@@ -0,0 +1,641 @@ ++/* Copyright (c) 2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#define pr_fmt(fmt) "AXI: %s(): " fmt, __func__ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include "msm-bus.h" ++#include "msm-bus-board.h" ++#include "msm_bus_rules.h" ++#include "msm_bus_core.h" ++#include "msm_bus_adhoc.h" ++ ++#define DEFAULT_QOS_FREQ 19200 ++#define DEFAULT_UTIL_FACT 100 ++#define DEFAULT_VRAIL_COMP 100 ++ ++static int get_qos_mode(struct platform_device *pdev, ++ struct device_node *node, const char *qos_mode) ++{ ++ const char *qos_names[] = {"fixed", "limiter", "bypass", "regulator"}; ++ int i = 0; ++ int ret = -1; ++ ++ if (!qos_mode) ++ goto exit_get_qos_mode; ++ ++ for (i = 0; i < ARRAY_SIZE(qos_names); i++) { ++ if (!strcmp(qos_mode, qos_names[i])) ++ break; ++ } ++ if (i == ARRAY_SIZE(qos_names)) ++ dev_err(&pdev->dev, "Cannot match mode qos %s using Bypass", ++ qos_mode); ++ else ++ ret = i; ++ ++exit_get_qos_mode: ++ return ret; ++} ++ ++static int *get_arr(struct platform_device *pdev, ++ struct device_node *node, const char *prop, ++ int *nports) ++{ ++ int size = 0, ret; ++ int *arr = NULL; ++ ++ if (of_get_property(node, prop, &size)) { ++ *nports = size / sizeof(int); ++ } else { ++ dev_dbg(&pdev->dev, "Property %s not available\n", prop); ++ *nports = 0; ++ return NULL; ++ } ++ ++ arr = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); ++ if ((size > 0) && ZERO_OR_NULL_PTR(arr)) { ++ dev_err(&pdev->dev, "Error: Failed to alloc mem for %s\n", ++ prop); ++ return NULL; ++ } ++ ++ ret = of_property_read_u32_array(node, prop, (u32 *)arr, *nports); ++ if (ret) { ++ dev_err(&pdev->dev, "Error in reading property: %s\n", prop); ++ goto arr_err; ++ } ++ ++ return arr; ++arr_err: ++ devm_kfree(&pdev->dev, arr); ++ return NULL; ++} ++ ++static struct msm_bus_fab_device_type *get_fab_device_info( ++ struct device_node *dev_node, ++ struct platform_device *pdev) ++{ ++ struct msm_bus_fab_device_type *fab_dev; ++ unsigned int ret; ++ struct resource *res; ++ const char *base_name; ++ ++ fab_dev = devm_kzalloc(&pdev->dev, ++ sizeof(struct msm_bus_fab_device_type), ++ GFP_KERNEL); ++ if (!fab_dev) { ++ dev_err(&pdev->dev, ++ "Error: Unable to allocate memory for fab_dev\n"); ++ return NULL; ++ } ++ ++ ret = of_property_read_string(dev_node, "qcom,base-name", &base_name); ++ if (ret) { ++ dev_err(&pdev->dev, "Error: Unable to get base address name\n"); ++ goto fab_dev_err; ++ } ++ ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, base_name); ++ if (!res) { ++ dev_err(&pdev->dev, "Error getting qos base addr %s\n", ++ base_name); ++ goto fab_dev_err; ++ } ++ fab_dev->pqos_base = res->start; ++ fab_dev->qos_range = resource_size(res); ++ fab_dev->bypass_qos_prg = of_property_read_bool(dev_node, ++ "qcom,bypass-qos-prg"); ++ ++ ret = of_property_read_u32(dev_node, "qcom,base-offset", ++ &fab_dev->base_offset); ++ if (ret) ++ dev_dbg(&pdev->dev, "Bus base offset is missing\n"); ++ ++ ret = of_property_read_u32(dev_node, "qcom,qos-off", ++ &fab_dev->qos_off); ++ if (ret) ++ dev_dbg(&pdev->dev, "Bus qos off is missing\n"); ++ ++ ++ ret = of_property_read_u32(dev_node, "qcom,bus-type", ++ &fab_dev->bus_type); ++ if (ret) { ++ dev_warn(&pdev->dev, "Bus type is missing\n"); ++ goto fab_dev_err; ++ } ++ ++ ret = of_property_read_u32(dev_node, "qcom,qos-freq", ++ &fab_dev->qos_freq); ++ if (ret) { ++ dev_dbg(&pdev->dev, "Bus qos freq is missing\n"); ++ fab_dev->qos_freq = DEFAULT_QOS_FREQ; ++ } ++ ++ ret = of_property_read_u32(dev_node, "qcom,util-fact", ++ &fab_dev->util_fact); ++ if (ret) { ++ dev_info(&pdev->dev, "Util-fact is missing, default to %d\n", ++ DEFAULT_UTIL_FACT); ++ fab_dev->util_fact = DEFAULT_UTIL_FACT; ++ } ++ ++ ret = of_property_read_u32(dev_node, "qcom,vrail-comp", ++ &fab_dev->vrail_comp); ++ if (ret) { ++ dev_info(&pdev->dev, "Vrail-comp is missing, default to %d\n", ++ DEFAULT_VRAIL_COMP); ++ fab_dev->vrail_comp = DEFAULT_VRAIL_COMP; ++ } ++ ++ return fab_dev; ++ ++fab_dev_err: ++ devm_kfree(&pdev->dev, fab_dev); ++ fab_dev = 0; ++ return NULL; ++} ++ ++static void get_qos_params( ++ struct device_node * const dev_node, ++ struct platform_device * const pdev, ++ struct msm_bus_node_info_type *node_info) ++{ ++ const char *qos_mode = NULL; ++ unsigned int ret; ++ unsigned int temp; ++ ++ ret = of_property_read_string(dev_node, "qcom,qos-mode", &qos_mode); ++ ++ if (ret) ++ node_info->qos_params.mode = -1; ++ else ++ node_info->qos_params.mode = get_qos_mode(pdev, dev_node, ++ qos_mode); ++ ++ of_property_read_u32(dev_node, "qcom,prio-lvl", ++ &node_info->qos_params.prio_lvl); ++ ++ of_property_read_u32(dev_node, "qcom,prio1", ++ &node_info->qos_params.prio1); ++ ++ of_property_read_u32(dev_node, "qcom,prio0", ++ &node_info->qos_params.prio0); ++ ++ of_property_read_u32(dev_node, "qcom,prio-rd", ++ &node_info->qos_params.prio_rd); ++ ++ of_property_read_u32(dev_node, "qcom,prio-wr", ++ &node_info->qos_params.prio_wr); ++ ++ of_property_read_u32(dev_node, "qcom,gp", ++ &node_info->qos_params.gp); ++ ++ of_property_read_u32(dev_node, "qcom,thmp", ++ &node_info->qos_params.thmp); ++ ++ of_property_read_u32(dev_node, "qcom,ws", ++ &node_info->qos_params.ws); ++ ++ ret = of_property_read_u32(dev_node, "qcom,bw_buffer", &temp); ++ ++ if (ret) ++ node_info->qos_params.bw_buffer = 0; ++ else ++ node_info->qos_params.bw_buffer = KBTOB(temp); ++ ++} ++ ++ ++static struct msm_bus_node_info_type *get_node_info_data( ++ struct device_node * const dev_node, ++ struct platform_device * const pdev) ++{ ++ struct msm_bus_node_info_type *node_info; ++ unsigned int ret; ++ int size; ++ int i; ++ struct device_node *con_node; ++ struct device_node *bus_dev; ++ ++ node_info = devm_kzalloc(&pdev->dev, ++ sizeof(struct msm_bus_node_info_type), ++ GFP_KERNEL); ++ if (!node_info) { ++ dev_err(&pdev->dev, ++ "Error: Unable to allocate memory for node_info\n"); ++ return NULL; ++ } ++ ++ ret = of_property_read_u32(dev_node, "cell-id", &node_info->id); ++ if (ret) { ++ dev_warn(&pdev->dev, "Bus node is missing cell-id\n"); ++ goto node_info_err; ++ } ++ ret = of_property_read_string(dev_node, "label", &node_info->name); ++ if (ret) { ++ dev_warn(&pdev->dev, "Bus node is missing name\n"); ++ goto node_info_err; ++ } ++ node_info->qport = get_arr(pdev, dev_node, "qcom,qport", ++ &node_info->num_qports); ++ ++ if (of_get_property(dev_node, "qcom,connections", &size)) { ++ node_info->num_connections = size / sizeof(int); ++ node_info->connections = devm_kzalloc(&pdev->dev, size, ++ GFP_KERNEL); ++ } else { ++ node_info->num_connections = 0; ++ node_info->connections = 0; ++ } ++ ++ for (i = 0; i < node_info->num_connections; i++) { ++ con_node = of_parse_phandle(dev_node, "qcom,connections", i); ++ if (IS_ERR_OR_NULL(con_node)) ++ goto node_info_err; ++ ++ if (of_property_read_u32(con_node, "cell-id", ++ &node_info->connections[i])) ++ goto node_info_err; ++ of_node_put(con_node); ++ } ++ ++ if (of_get_property(dev_node, "qcom,blacklist", &size)) { ++ node_info->num_blist = size/sizeof(u32); ++ node_info->black_listed_connections = devm_kzalloc(&pdev->dev, ++ size, GFP_KERNEL); ++ } else { ++ node_info->num_blist = 0; ++ node_info->black_listed_connections = 0; ++ } ++ ++ for (i = 0; i < node_info->num_blist; i++) { ++ con_node = of_parse_phandle(dev_node, "qcom,blacklist", i); ++ if (IS_ERR_OR_NULL(con_node)) ++ goto node_info_err; ++ ++ if (of_property_read_u32(con_node, "cell-id", ++ &node_info->black_listed_connections[i])) ++ goto node_info_err; ++ of_node_put(con_node); ++ } ++ ++ bus_dev = of_parse_phandle(dev_node, "qcom,bus-dev", 0); ++ if (!IS_ERR_OR_NULL(bus_dev)) { ++ if (of_property_read_u32(bus_dev, "cell-id", ++ &node_info->bus_device_id)) { ++ dev_err(&pdev->dev, "Can't find bus device. Node %d", ++ node_info->id); ++ goto node_info_err; ++ } ++ ++ of_node_put(bus_dev); ++ } else ++ dev_dbg(&pdev->dev, "Can't find bdev phandle for %d", ++ node_info->id); ++ ++ node_info->is_fab_dev = of_property_read_bool(dev_node, "qcom,fab-dev"); ++ node_info->virt_dev = of_property_read_bool(dev_node, "qcom,virt-dev"); ++ ++ ret = of_property_read_u32(dev_node, "qcom,buswidth", ++ &node_info->buswidth); ++ if (ret) { ++ dev_dbg(&pdev->dev, "Using default 8 bytes %d", node_info->id); ++ node_info->buswidth = 8; ++ } ++ ++ ret = of_property_read_u32(dev_node, "qcom,mas-rpm-id", ++ &node_info->mas_rpm_id); ++ if (ret) { ++ dev_dbg(&pdev->dev, "mas rpm id is missing\n"); ++ node_info->mas_rpm_id = -1; ++ } ++ ++ ret = of_property_read_u32(dev_node, "qcom,slv-rpm-id", ++ &node_info->slv_rpm_id); ++ if (ret) { ++ dev_dbg(&pdev->dev, "slv rpm id is missing\n"); ++ node_info->slv_rpm_id = -1; ++ } ++ ret = of_property_read_u32(dev_node, "qcom,util-fact", ++ &node_info->util_fact); ++ if (ret) ++ node_info->util_fact = 0; ++ ret = of_property_read_u32(dev_node, "qcom,vrail-comp", ++ &node_info->vrail_comp); ++ if (ret) ++ node_info->vrail_comp = 0; ++ get_qos_params(dev_node, pdev, node_info); ++ ++ return node_info; ++ ++node_info_err: ++ devm_kfree(&pdev->dev, node_info); ++ node_info = 0; ++ return NULL; ++} ++ ++static unsigned int get_bus_node_device_data( ++ struct device_node * const dev_node, ++ struct platform_device * const pdev, ++ struct msm_bus_node_device_type * const node_device) ++{ ++ node_device->node_info = get_node_info_data(dev_node, pdev); ++ if (IS_ERR_OR_NULL(node_device->node_info)) { ++ dev_err(&pdev->dev, "Error: Node info missing\n"); ++ return -ENODATA; ++ } ++ node_device->ap_owned = of_property_read_bool(dev_node, ++ "qcom,ap-owned"); ++ ++ if (node_device->node_info->is_fab_dev) { ++ dev_dbg(&pdev->dev, "Dev %d\n", node_device->node_info->id); ++ ++ if (!node_device->node_info->virt_dev) { ++ node_device->fabdev = ++ get_fab_device_info(dev_node, pdev); ++ if (IS_ERR_OR_NULL(node_device->fabdev)) { ++ dev_err(&pdev->dev, ++ "Error: Fabric device info missing\n"); ++ devm_kfree(&pdev->dev, node_device->node_info); ++ return -ENODATA; ++ } ++ } ++ node_device->clk[DUAL_CTX].clk = of_clk_get_by_name(dev_node, ++ "bus_clk"); ++ ++ if (IS_ERR_OR_NULL(node_device->clk[DUAL_CTX].clk)) ++ dev_dbg(&pdev->dev, ++ "%s:Failed to get bus clk for bus%d ctx%d", ++ __func__, node_device->node_info->id, ++ DUAL_CTX); ++ ++ node_device->clk[ACTIVE_CTX].clk = of_clk_get_by_name(dev_node, ++ "bus_a_clk"); ++ if (IS_ERR_OR_NULL(node_device->clk[ACTIVE_CTX].clk)) ++ dev_err(&pdev->dev, ++ "Failed to get bus clk for bus%d ctx%d", ++ node_device->node_info->id, ACTIVE_CTX); ++ if (msmbus_coresight_init_adhoc(pdev, dev_node)) ++ dev_warn(&pdev->dev, ++ "Coresight support absent for bus: %d\n", ++ node_device->node_info->id); ++ } else { ++ node_device->qos_clk.clk = of_clk_get_by_name(dev_node, ++ "bus_qos_clk"); ++ ++ if (IS_ERR_OR_NULL(node_device->qos_clk.clk)) ++ dev_dbg(&pdev->dev, ++ "%s:Failed to get bus qos clk for mas%d", ++ __func__, node_device->node_info->id); ++ ++ node_device->clk[DUAL_CTX].clk = of_clk_get_by_name(dev_node, ++ "node_clk"); ++ ++ if (IS_ERR_OR_NULL(node_device->clk[DUAL_CTX].clk)) ++ dev_dbg(&pdev->dev, ++ "%s:Failed to get bus clk for bus%d ctx%d", ++ __func__, node_device->node_info->id, ++ DUAL_CTX); ++ ++ } ++ return 0; ++} ++ ++struct msm_bus_device_node_registration ++ *msm_bus_of_to_pdata(struct platform_device *pdev) ++{ ++ struct device_node *of_node, *child_node; ++ struct msm_bus_device_node_registration *pdata; ++ unsigned int i = 0, j; ++ unsigned int ret; ++ ++ if (!pdev) { ++ pr_err("Error: Null platform device\n"); ++ return NULL; ++ } ++ ++ of_node = pdev->dev.of_node; ++ ++ pdata = devm_kzalloc(&pdev->dev, ++ sizeof(struct msm_bus_device_node_registration), ++ GFP_KERNEL); ++ if (!pdata) { ++ dev_err(&pdev->dev, ++ "Error: Memory allocation for pdata failed\n"); ++ return NULL; ++ } ++ ++ pdata->num_devices = of_get_child_count(of_node); ++ ++ pdata->info = devm_kzalloc(&pdev->dev, ++ sizeof(struct msm_bus_node_device_type) * ++ pdata->num_devices, GFP_KERNEL); ++ ++ if (!pdata->info) { ++ dev_err(&pdev->dev, ++ "Error: Memory allocation for pdata->info failed\n"); ++ goto node_reg_err; ++ } ++ ++ ret = 0; ++ for_each_child_of_node(of_node, child_node) { ++ ret = get_bus_node_device_data(child_node, pdev, ++ &pdata->info[i]); ++ if (ret) { ++ dev_err(&pdev->dev, "Error: unable to initialize bus nodes\n"); ++ goto node_reg_err_1; ++ } ++ i++; ++ } ++ ++ dev_dbg(&pdev->dev, "bus topology:\n"); ++ for (i = 0; i < pdata->num_devices; i++) { ++ dev_dbg(&pdev->dev, "id %d\nnum_qports %d\nnum_connections %d", ++ pdata->info[i].node_info->id, ++ pdata->info[i].node_info->num_qports, ++ pdata->info[i].node_info->num_connections); ++ dev_dbg(&pdev->dev, "\nbus_device_id %d\n buswidth %d\n", ++ pdata->info[i].node_info->bus_device_id, ++ pdata->info[i].node_info->buswidth); ++ for (j = 0; j < pdata->info[i].node_info->num_connections; ++ j++) { ++ dev_dbg(&pdev->dev, "connection[%d]: %d\n", j, ++ pdata->info[i].node_info->connections[j]); ++ } ++ for (j = 0; j < pdata->info[i].node_info->num_blist; ++ j++) { ++ dev_dbg(&pdev->dev, "black_listed_node[%d]: %d\n", j, ++ pdata->info[i].node_info-> ++ black_listed_connections[j]); ++ } ++ if (pdata->info[i].fabdev) ++ dev_dbg(&pdev->dev, "base_addr %zu\nbus_type %d\n", ++ (size_t)pdata->info[i]. ++ fabdev->pqos_base, ++ pdata->info[i].fabdev->bus_type); ++ } ++ return pdata; ++ ++node_reg_err_1: ++ devm_kfree(&pdev->dev, pdata->info); ++node_reg_err: ++ devm_kfree(&pdev->dev, pdata); ++ pdata = NULL; ++ return NULL; ++} ++ ++static int msm_bus_of_get_ids(struct platform_device *pdev, ++ struct device_node *dev_node, int **dev_ids, ++ int *num_ids, char *prop_name) ++{ ++ int ret = 0; ++ int size, i; ++ struct device_node *rule_node; ++ int *ids = NULL; ++ ++ if (of_get_property(dev_node, prop_name, &size)) { ++ *num_ids = size / sizeof(int); ++ ids = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); ++ } else { ++ dev_err(&pdev->dev, "No rule nodes, skipping node"); ++ ret = -ENXIO; ++ goto exit_get_ids; ++ } ++ ++ *dev_ids = ids; ++ for (i = 0; i < *num_ids; i++) { ++ rule_node = of_parse_phandle(dev_node, prop_name, i); ++ if (IS_ERR_OR_NULL(rule_node)) { ++ dev_err(&pdev->dev, "Can't get rule node id"); ++ ret = -ENXIO; ++ goto err_get_ids; ++ } ++ ++ if (of_property_read_u32(rule_node, "cell-id", ++ &ids[i])) { ++ dev_err(&pdev->dev, "Can't get rule node id"); ++ ret = -ENXIO; ++ goto err_get_ids; ++ } ++ of_node_put(rule_node); ++ } ++exit_get_ids: ++ return ret; ++err_get_ids: ++ devm_kfree(&pdev->dev, ids); ++ of_node_put(rule_node); ++ ids = NULL; ++ return ret; ++} ++ ++int msm_bus_of_get_static_rules(struct platform_device *pdev, ++ struct bus_rule_type **static_rules) ++{ ++ int ret = 0; ++ struct device_node *of_node, *child_node; ++ int num_rules = 0; ++ int rule_idx = 0; ++ int bw_fld = 0; ++ int i; ++ struct bus_rule_type *static_rule = NULL; ++ ++ of_node = pdev->dev.of_node; ++ num_rules = of_get_child_count(of_node); ++ static_rule = devm_kzalloc(&pdev->dev, ++ sizeof(struct bus_rule_type) * num_rules, ++ GFP_KERNEL); ++ ++ if (IS_ERR_OR_NULL(static_rule)) { ++ ret = -ENOMEM; ++ goto exit_static_rules; ++ } ++ ++ *static_rules = static_rule; ++ for_each_child_of_node(of_node, child_node) { ++ ret = msm_bus_of_get_ids(pdev, child_node, ++ &static_rule[rule_idx].src_id, ++ &static_rule[rule_idx].num_src, ++ "qcom,src-nodes"); ++ ++ ret = msm_bus_of_get_ids(pdev, child_node, ++ &static_rule[rule_idx].dst_node, ++ &static_rule[rule_idx].num_dst, ++ "qcom,dest-node"); ++ ++ ret = of_property_read_u32(child_node, "qcom,src-field", ++ &static_rule[rule_idx].src_field); ++ if (ret) { ++ dev_err(&pdev->dev, "src-field missing"); ++ ret = -ENXIO; ++ goto err_static_rules; ++ } ++ ++ ret = of_property_read_u32(child_node, "qcom,src-op", ++ &static_rule[rule_idx].op); ++ if (ret) { ++ dev_err(&pdev->dev, "src-op missing"); ++ ret = -ENXIO; ++ goto err_static_rules; ++ } ++ ++ ret = of_property_read_u32(child_node, "qcom,mode", ++ &static_rule[rule_idx].mode); ++ if (ret) { ++ dev_err(&pdev->dev, "mode missing"); ++ ret = -ENXIO; ++ goto err_static_rules; ++ } ++ ++ ret = of_property_read_u32(child_node, "qcom,thresh", &bw_fld); ++ if (ret) { ++ dev_err(&pdev->dev, "thresh missing"); ++ ret = -ENXIO; ++ goto err_static_rules; ++ } else ++ static_rule[rule_idx].thresh = KBTOB(bw_fld); ++ ++ ret = of_property_read_u32(child_node, "qcom,dest-bw", ++ &bw_fld); ++ if (ret) ++ static_rule[rule_idx].dst_bw = 0; ++ else ++ static_rule[rule_idx].dst_bw = KBTOB(bw_fld); ++ ++ rule_idx++; ++ } ++ ret = rule_idx; ++exit_static_rules: ++ return ret; ++err_static_rules: ++ for (i = 0; i < num_rules; i++) { ++ if (!IS_ERR_OR_NULL(static_rule)) { ++ if (!IS_ERR_OR_NULL(static_rule[i].src_id)) ++ devm_kfree(&pdev->dev, ++ static_rule[i].src_id); ++ if (!IS_ERR_OR_NULL(static_rule[i].dst_node)) ++ devm_kfree(&pdev->dev, ++ static_rule[i].dst_node); ++ devm_kfree(&pdev->dev, static_rule); ++ } ++ } ++ devm_kfree(&pdev->dev, *static_rules); ++ static_rules = NULL; ++ return ret; ++} +--- /dev/null ++++ b/drivers/bus/msm_bus/msm_bus_rules.c +@@ -0,0 +1,624 @@ ++/* Copyright (c) 2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include "msm-bus-board.h" ++#include "msm_bus_rules.h" ++#include ++ ++struct node_vote_info { ++ int id; ++ u64 ib; ++ u64 ab; ++ u64 clk; ++}; ++ ++struct rules_def { ++ int rule_id; ++ int num_src; ++ int state; ++ struct node_vote_info *src_info; ++ struct bus_rule_type rule_ops; ++ bool state_change; ++ struct list_head link; ++}; ++ ++struct rule_node_info { ++ int id; ++ void *data; ++ struct raw_notifier_head rule_notify_list; ++ int cur_rule; ++ int num_rules; ++ struct list_head node_rules; ++ struct list_head link; ++ struct rule_apply_rcm_info apply; ++}; ++ ++DEFINE_MUTEX(msm_bus_rules_lock); ++static LIST_HEAD(node_list); ++static struct rule_node_info *get_node(u32 id, void *data); ++ ++#define LE(op1, op2) (op1 <= op2) ++#define LT(op1, op2) (op1 < op2) ++#define GE(op1, op2) (op1 >= op2) ++#define GT(op1, op2) (op1 > op2) ++#define NB_ID (0x201) ++ ++static struct rule_node_info *get_node(u32 id, void *data) ++{ ++ struct rule_node_info *node_it = NULL; ++ struct rule_node_info *node_match = NULL; ++ ++ list_for_each_entry(node_it, &node_list, link) { ++ if (node_it->id == id) { ++ if ((id == NB_ID)) { ++ if ((node_it->data == data)) { ++ node_match = node_it; ++ break; ++ } ++ } else { ++ node_match = node_it; ++ break; ++ } ++ } ++ } ++ return node_match; ++} ++ ++static struct rule_node_info *gen_node(u32 id, void *data) ++{ ++ struct rule_node_info *node_it = NULL; ++ struct rule_node_info *node_match = NULL; ++ ++ list_for_each_entry(node_it, &node_list, link) { ++ if (node_it->id == id) { ++ node_match = node_it; ++ break; ++ } ++ } ++ ++ if (!node_match) { ++ node_match = kzalloc(sizeof(struct rule_node_info), GFP_KERNEL); ++ if (!node_match) { ++ pr_err("%s: Cannot allocate memory", __func__); ++ goto exit_node_match; ++ } ++ ++ node_match->id = id; ++ node_match->cur_rule = -1; ++ node_match->num_rules = 0; ++ node_match->data = data; ++ list_add_tail(&node_match->link, &node_list); ++ INIT_LIST_HEAD(&node_match->node_rules); ++ RAW_INIT_NOTIFIER_HEAD(&node_match->rule_notify_list); ++ pr_debug("Added new node %d to list\n", id); ++ } ++exit_node_match: ++ return node_match; ++} ++ ++static bool do_compare_op(u64 op1, u64 op2, int op) ++{ ++ bool ret = false; ++ ++ switch (op) { ++ case OP_LE: ++ ret = LE(op1, op2); ++ break; ++ case OP_LT: ++ ret = LT(op1, op2); ++ break; ++ case OP_GT: ++ ret = GT(op1, op2); ++ break; ++ case OP_GE: ++ ret = GE(op1, op2); ++ break; ++ case OP_NOOP: ++ ret = true; ++ break; ++ default: ++ pr_info("Invalid OP %d", op); ++ break; ++ } ++ return ret; ++} ++ ++static void update_src_id_vote(struct rule_update_path_info *inp_node, ++ struct rule_node_info *rule_node) ++{ ++ struct rules_def *rule; ++ int i; ++ ++ list_for_each_entry(rule, &rule_node->node_rules, link) { ++ for (i = 0; i < rule->num_src; i++) { ++ if (rule->src_info[i].id == inp_node->id) { ++ rule->src_info[i].ib = inp_node->ib; ++ rule->src_info[i].ab = inp_node->ab; ++ rule->src_info[i].clk = inp_node->clk; ++ } ++ } ++ } ++} ++ ++static u64 get_field(struct rules_def *rule, int src_id) ++{ ++ u64 field = 0; ++ int i; ++ ++ for (i = 0; i < rule->num_src; i++) { ++ switch (rule->rule_ops.src_field) { ++ case FLD_IB: ++ field += rule->src_info[i].ib; ++ break; ++ case FLD_AB: ++ field += rule->src_info[i].ab; ++ break; ++ case FLD_CLK: ++ field += rule->src_info[i].clk; ++ break; ++ } ++ } ++ ++ return field; ++} ++ ++static bool check_rule(struct rules_def *rule, ++ struct rule_update_path_info *inp) ++{ ++ bool ret = false; ++ ++ if (!rule) ++ return ret; ++ ++ switch (rule->rule_ops.op) { ++ case OP_LE: ++ case OP_LT: ++ case OP_GT: ++ case OP_GE: ++ { ++ u64 src_field = get_field(rule, inp->id); ++ if (!src_field) ++ ret = false; ++ else ++ ret = do_compare_op(src_field, rule->rule_ops.thresh, ++ rule->rule_ops.op); ++ break; ++ } ++ default: ++ pr_err("Unsupported op %d", rule->rule_ops.op); ++ break; ++ } ++ return ret; ++} ++ ++static void match_rule(struct rule_update_path_info *inp_node, ++ struct rule_node_info *node) ++{ ++ struct rules_def *rule; ++ int i; ++ ++ list_for_each_entry(rule, &node->node_rules, link) { ++ for (i = 0; i < rule->num_src; i++) { ++ if (rule->src_info[i].id == inp_node->id) { ++ if (check_rule(rule, inp_node)) { ++ trace_bus_rules_matches(node->cur_rule, ++ inp_node->id, inp_node->ab, ++ inp_node->ib, inp_node->clk); ++ if (rule->state == ++ RULE_STATE_NOT_APPLIED) ++ rule->state_change = true; ++ rule->state = RULE_STATE_APPLIED; ++ } else { ++ if (rule->state == ++ RULE_STATE_APPLIED) ++ rule->state_change = true; ++ rule->state = RULE_STATE_NOT_APPLIED; ++ } ++ } ++ } ++ } ++} ++ ++static void apply_rule(struct rule_node_info *node, ++ struct list_head *output_list) ++{ ++ struct rules_def *rule; ++ ++ node->cur_rule = -1; ++ list_for_each_entry(rule, &node->node_rules, link) { ++ if ((rule->state == RULE_STATE_APPLIED) && ++ (node->cur_rule == -1)) ++ node->cur_rule = rule->rule_id; ++ ++ if (node->id == NB_ID) { ++ if (rule->state_change) { ++ rule->state_change = false; ++ raw_notifier_call_chain(&node->rule_notify_list, ++ rule->state, (void *)&rule->rule_ops); ++ } ++ } else { ++ if ((rule->state == RULE_STATE_APPLIED) && ++ (node->cur_rule == rule->rule_id)) { ++ node->apply.id = rule->rule_ops.dst_node[0]; ++ node->apply.throttle = rule->rule_ops.mode; ++ node->apply.lim_bw = rule->rule_ops.dst_bw; ++ list_add_tail(&node->apply.link, output_list); ++ } ++ rule->state_change = false; ++ } ++ } ++ ++} ++ ++int msm_rules_update_path(struct list_head *input_list, ++ struct list_head *output_list) ++{ ++ int ret = 0; ++ struct rule_update_path_info *inp_node; ++ struct rule_node_info *node_it = NULL; ++ ++ mutex_lock(&msm_bus_rules_lock); ++ list_for_each_entry(inp_node, input_list, link) { ++ list_for_each_entry(node_it, &node_list, link) { ++ update_src_id_vote(inp_node, node_it); ++ match_rule(inp_node, node_it); ++ } ++ } ++ ++ list_for_each_entry(node_it, &node_list, link) ++ apply_rule(node_it, output_list); ++ ++ mutex_unlock(&msm_bus_rules_lock); ++ return ret; ++} ++ ++static bool ops_equal(int op1, int op2) ++{ ++ bool ret = false; ++ ++ switch (op1) { ++ case OP_GT: ++ case OP_GE: ++ case OP_LT: ++ case OP_LE: ++ if (abs(op1 - op2) <= 1) ++ ret = true; ++ break; ++ default: ++ ret = (op1 == op2); ++ } ++ ++ return ret; ++} ++ ++static int node_rules_compare(void *priv, struct list_head *a, ++ struct list_head *b) ++{ ++ struct rules_def *ra = container_of(a, struct rules_def, link); ++ struct rules_def *rb = container_of(b, struct rules_def, link); ++ int ret = -1; ++ int64_t th_diff = 0; ++ ++ ++ if (ra->rule_ops.mode == rb->rule_ops.mode) { ++ if (ops_equal(ra->rule_ops.op, rb->rule_ops.op)) { ++ if ((ra->rule_ops.op == OP_LT) || ++ (ra->rule_ops.op == OP_LE)) { ++ th_diff = ra->rule_ops.thresh - ++ rb->rule_ops.thresh; ++ if (th_diff > 0) ++ ret = 1; ++ else ++ ret = -1; ++ } else if ((ra->rule_ops.op == OP_GT) || ++ (ra->rule_ops.op == OP_GE)) { ++ th_diff = rb->rule_ops.thresh - ++ ra->rule_ops.thresh; ++ if (th_diff > 0) ++ ret = 1; ++ else ++ ret = -1; ++ } ++ } else ++ ret = ra->rule_ops.op - rb->rule_ops.op; ++ } else if ((ra->rule_ops.mode == THROTTLE_OFF) && ++ (rb->rule_ops.mode == THROTTLE_ON)) { ++ ret = 1; ++ } else if ((ra->rule_ops.mode == THROTTLE_ON) && ++ (rb->rule_ops.mode == THROTTLE_OFF)) { ++ ret = -1; ++ } ++ ++ return ret; ++} ++ ++static void print_rules(struct rule_node_info *node_it) ++{ ++ struct rules_def *node_rule = NULL; ++ int i; ++ ++ if (!node_it) { ++ pr_err("%s: no node for found", __func__); ++ return; ++ } ++ ++ pr_info("\n Now printing rules for Node %d cur rule %d\n", ++ node_it->id, node_it->cur_rule); ++ list_for_each_entry(node_rule, &node_it->node_rules, link) { ++ pr_info("\n num Rules %d rule Id %d\n", ++ node_it->num_rules, node_rule->rule_id); ++ pr_info("Rule: src_field %d\n", node_rule->rule_ops.src_field); ++ for (i = 0; i < node_rule->rule_ops.num_src; i++) ++ pr_info("Rule: src %d\n", ++ node_rule->rule_ops.src_id[i]); ++ for (i = 0; i < node_rule->rule_ops.num_dst; i++) ++ pr_info("Rule: dst %d dst_bw %llu\n", ++ node_rule->rule_ops.dst_node[i], ++ node_rule->rule_ops.dst_bw); ++ pr_info("Rule: thresh %llu op %d mode %d State %d\n", ++ node_rule->rule_ops.thresh, ++ node_rule->rule_ops.op, ++ node_rule->rule_ops.mode, ++ node_rule->state); ++ } ++} ++ ++void print_all_rules(void) ++{ ++ struct rule_node_info *node_it = NULL; ++ ++ list_for_each_entry(node_it, &node_list, link) ++ print_rules(node_it); ++} ++ ++void print_rules_buf(char *buf, int max_buf) ++{ ++ struct rule_node_info *node_it = NULL; ++ struct rules_def *node_rule = NULL; ++ int i; ++ int cnt = 0; ++ ++ list_for_each_entry(node_it, &node_list, link) { ++ cnt += scnprintf(buf + cnt, max_buf - cnt, ++ "\n Now printing rules for Node %d cur_rule %d\n", ++ node_it->id, node_it->cur_rule); ++ list_for_each_entry(node_rule, &node_it->node_rules, link) { ++ cnt += scnprintf(buf + cnt, max_buf - cnt, ++ "\nNum Rules:%d ruleId %d STATE:%d change:%d\n", ++ node_it->num_rules, node_rule->rule_id, ++ node_rule->state, node_rule->state_change); ++ cnt += scnprintf(buf + cnt, max_buf - cnt, ++ "Src_field %d\n", ++ node_rule->rule_ops.src_field); ++ for (i = 0; i < node_rule->rule_ops.num_src; i++) ++ cnt += scnprintf(buf + cnt, max_buf - cnt, ++ "Src %d Cur Ib %llu Ab %llu\n", ++ node_rule->rule_ops.src_id[i], ++ node_rule->src_info[i].ib, ++ node_rule->src_info[i].ab); ++ for (i = 0; i < node_rule->rule_ops.num_dst; i++) ++ cnt += scnprintf(buf + cnt, max_buf - cnt, ++ "Dst %d dst_bw %llu\n", ++ node_rule->rule_ops.dst_node[0], ++ node_rule->rule_ops.dst_bw); ++ cnt += scnprintf(buf + cnt, max_buf - cnt, ++ "Thresh %llu op %d mode %d\n", ++ node_rule->rule_ops.thresh, ++ node_rule->rule_ops.op, ++ node_rule->rule_ops.mode); ++ } ++ } ++} ++ ++static int copy_rule(struct bus_rule_type *src, struct rules_def *node_rule, ++ struct notifier_block *nb) ++{ ++ int i; ++ int ret = 0; ++ ++ memcpy(&node_rule->rule_ops, src, ++ sizeof(struct bus_rule_type)); ++ node_rule->rule_ops.src_id = kzalloc( ++ (sizeof(int) * node_rule->rule_ops.num_src), ++ GFP_KERNEL); ++ if (!node_rule->rule_ops.src_id) { ++ pr_err("%s:Failed to allocate for src_id", ++ __func__); ++ return -ENOMEM; ++ } ++ memcpy(node_rule->rule_ops.src_id, src->src_id, ++ sizeof(int) * src->num_src); ++ ++ ++ if (!nb) { ++ node_rule->rule_ops.dst_node = kzalloc( ++ (sizeof(int) * node_rule->rule_ops.num_dst), ++ GFP_KERNEL); ++ if (!node_rule->rule_ops.dst_node) { ++ pr_err("%s:Failed to allocate for src_id", ++ __func__); ++ return -ENOMEM; ++ } ++ memcpy(node_rule->rule_ops.dst_node, src->dst_node, ++ sizeof(int) * src->num_dst); ++ } ++ ++ node_rule->num_src = src->num_src; ++ node_rule->src_info = kzalloc( ++ (sizeof(struct node_vote_info) * node_rule->rule_ops.num_src), ++ GFP_KERNEL); ++ if (!node_rule->src_info) { ++ pr_err("%s:Failed to allocate for src_id", ++ __func__); ++ return -ENOMEM; ++ } ++ for (i = 0; i < src->num_src; i++) ++ node_rule->src_info[i].id = src->src_id[i]; ++ ++ return ret; ++} ++ ++void msm_rule_register(int num_rules, struct bus_rule_type *rule, ++ struct notifier_block *nb) ++{ ++ struct rule_node_info *node = NULL; ++ int i, j; ++ struct rules_def *node_rule = NULL; ++ int num_dst = 0; ++ ++ if (!rule) ++ return; ++ ++ mutex_lock(&msm_bus_rules_lock); ++ for (i = 0; i < num_rules; i++) { ++ if (nb) ++ num_dst = 1; ++ else ++ num_dst = rule[i].num_dst; ++ ++ for (j = 0; j < num_dst; j++) { ++ int id = 0; ++ ++ if (nb) ++ id = NB_ID; ++ else ++ id = rule[i].dst_node[j]; ++ ++ node = gen_node(id, nb); ++ if (!node) { ++ pr_info("Error getting rule"); ++ goto exit_rule_register; ++ } ++ node_rule = kzalloc(sizeof(struct rules_def), ++ GFP_KERNEL); ++ if (!node_rule) { ++ pr_err("%s: Failed to allocate for rule", ++ __func__); ++ goto exit_rule_register; ++ } ++ ++ if (copy_rule(&rule[i], node_rule, nb)) { ++ pr_err("Error copying rule"); ++ goto exit_rule_register; ++ } ++ ++ node_rule->rule_id = node->num_rules++; ++ if (nb) ++ node->data = nb; ++ ++ list_add_tail(&node_rule->link, &node->node_rules); ++ } ++ } ++ list_sort(NULL, &node->node_rules, node_rules_compare); ++ ++ if (nb) ++ raw_notifier_chain_register(&node->rule_notify_list, nb); ++exit_rule_register: ++ mutex_unlock(&msm_bus_rules_lock); ++ return; ++} ++ ++static int comp_rules(struct bus_rule_type *rulea, struct bus_rule_type *ruleb) ++{ ++ int ret = 1; ++ ++ if (rulea->num_src == ruleb->num_src) ++ ret = memcmp(rulea->src_id, ruleb->src_id, ++ (sizeof(int) * rulea->num_src)); ++ if (!ret && (rulea->num_dst == ruleb->num_dst)) ++ ret = memcmp(rulea->dst_node, ruleb->dst_node, ++ (sizeof(int) * rulea->num_dst)); ++ if (!ret && (rulea->dst_bw == ruleb->dst_bw) && ++ (rulea->op == ruleb->op) && (rulea->thresh == ruleb->thresh)) ++ ret = 0; ++ ++ return ret; ++} ++ ++void msm_rule_unregister(int num_rules, struct bus_rule_type *rule, ++ struct notifier_block *nb) ++{ ++ int i; ++ struct rule_node_info *node = NULL; ++ struct rule_node_info *node_tmp = NULL; ++ struct rules_def *node_rule; ++ struct rules_def *node_rule_tmp; ++ bool match_found = false; ++ ++ if (!rule) ++ return; ++ ++ mutex_lock(&msm_bus_rules_lock); ++ if (nb) { ++ node = get_node(NB_ID, nb); ++ if (!node) { ++ pr_err("%s: Can't find node", __func__); ++ goto exit_unregister_rule; ++ } ++ ++ list_for_each_entry_safe(node_rule, node_rule_tmp, ++ &node->node_rules, link) { ++ list_del(&node_rule->link); ++ kfree(node_rule); ++ node->num_rules--; ++ } ++ raw_notifier_chain_unregister(&node->rule_notify_list, nb); ++ } else { ++ for (i = 0; i < num_rules; i++) { ++ match_found = false; ++ ++ list_for_each_entry(node, &node_list, link) { ++ list_for_each_entry_safe(node_rule, ++ node_rule_tmp, &node->node_rules, link) { ++ if (comp_rules(&node_rule->rule_ops, ++ &rule[i]) == 0) { ++ list_del(&node_rule->link); ++ kfree(node_rule); ++ match_found = true; ++ node->num_rules--; ++ list_sort(NULL, ++ &node->node_rules, ++ node_rules_compare); ++ break; ++ } ++ } ++ } ++ } ++ } ++ ++ list_for_each_entry_safe(node, node_tmp, ++ &node_list, link) { ++ if (!node->num_rules) { ++ pr_debug("Deleting Rule node %d", node->id); ++ list_del(&node->link); ++ kfree(node); ++ } ++ } ++exit_unregister_rule: ++ mutex_unlock(&msm_bus_rules_lock); ++} ++ ++bool msm_rule_are_rules_registered(void) ++{ ++ bool ret = false; ++ ++ if (list_empty(&node_list)) ++ ret = false; ++ else ++ ret = true; ++ ++ return ret; ++} ++ +--- /dev/null ++++ b/drivers/bus/msm_bus/msm_bus_rules.h +@@ -0,0 +1,77 @@ ++/* Copyright (c) 2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#ifndef _ARCH_ARM_MACH_MSM_BUS_RULES_H ++#define _ARCH_ARM_MACH_MSM_BUS_RULES_H ++ ++#include ++#include ++#include ++#include ++ ++#define MAX_NODES (5) ++ ++struct rule_update_path_info { ++ u32 id; ++ u64 ab; ++ u64 ib; ++ u64 clk; ++ struct list_head link; ++}; ++ ++struct rule_apply_rcm_info { ++ u32 id; ++ u64 lim_bw; ++ int throttle; ++ bool after_clk_commit; ++ struct list_head link; ++}; ++ ++struct bus_rule_type { ++ int num_src; ++ int *src_id; ++ int src_field; ++ int op; ++ u64 thresh; ++ int num_dst; ++ int *dst_node; ++ u64 dst_bw; ++ int mode; ++ void *client_data; ++}; ++ ++#if (defined(CONFIG_BUS_TOPOLOGY_ADHOC)) ++void msm_rule_register(int num_rules, struct bus_rule_type *rule, ++ struct notifier_block *nb); ++void msm_rule_unregister(int num_rules, struct bus_rule_type *rule, ++ struct notifier_block *nb); ++void print_rules_buf(char *buf, int count); ++bool msm_rule_are_rules_registered(void); ++#else ++static inline void msm_rule_register(int num_rules, struct bus_rule_type *rule, ++ struct notifier_block *nb) ++{ ++} ++static inline void msm_rule_unregister(int num_rules, ++ struct bus_rule_type *rule, ++ struct notifier_block *nb) ++{ ++} ++static inline void print_rules_buf(char *buf, int count) ++{ ++} ++static inline bool msm_rule_are_rules_registered(void) ++{ ++ return false; ++} ++#endif /* defined(CONFIG_BUS_TOPOLOGY_ADHOC) */ ++#endif /* _ARCH_ARM_MACH_MSM_BUS_RULES_H */ +--- /dev/null ++++ b/drivers/bus/msm_bus/msm_buspm_coresight_adhoc.c +@@ -0,0 +1,189 @@ ++/* Copyright (c) 2014 The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++struct msmbus_coresight_adhoc_clock_drvdata { ++ int id; ++ struct clk *clk; ++ struct list_head list; ++}; ++ ++struct msmbus_coresight_adhoc_drvdata { ++ struct device *dev; ++ struct coresight_device *csdev; ++ struct coresight_desc *desc; ++ struct list_head clocks; ++}; ++ ++static int msmbus_coresight_enable_adhoc(struct coresight_device *csdev) ++{ ++ struct msmbus_coresight_adhoc_clock_drvdata *clk; ++ struct msmbus_coresight_adhoc_drvdata *drvdata = ++ dev_get_drvdata(csdev->dev.parent); ++ long rate; ++ ++ list_for_each_entry(clk, &drvdata->clocks, list) { ++ if (clk->id == csdev->id) { ++ rate = clk_round_rate(clk->clk, 1L); ++ clk_set_rate(clk->clk, rate); ++ return clk_prepare_enable(clk->clk); ++ } ++ } ++ ++ return -ENOENT; ++} ++ ++static void msmbus_coresight_disable_adhoc(struct coresight_device *csdev) ++{ ++ struct msmbus_coresight_adhoc_clock_drvdata *clk; ++ struct msmbus_coresight_adhoc_drvdata *drvdata = ++ dev_get_drvdata(csdev->dev.parent); ++ ++ list_for_each_entry(clk, &drvdata->clocks, list) { ++ if (clk->id == csdev->id) ++ clk_disable_unprepare(clk->clk); ++ } ++} ++ ++static const struct coresight_ops_source msmbus_coresight_adhoc_source_ops = { ++ .enable = msmbus_coresight_enable_adhoc, ++ .disable = msmbus_coresight_disable_adhoc, ++}; ++ ++static const struct coresight_ops msmbus_coresight_cs_ops = { ++ .source_ops = &msmbus_coresight_adhoc_source_ops, ++}; ++ ++void msmbus_coresight_remove_adhoc(struct platform_device *pdev) ++{ ++ struct msmbus_coresight_adhoc_clock_drvdata *clk, *next_clk; ++ struct msmbus_coresight_adhoc_drvdata *drvdata = ++ platform_get_drvdata(pdev); ++ ++ msmbus_coresight_disable_adhoc(drvdata->csdev); ++ coresight_unregister(drvdata->csdev); ++ list_for_each_entry_safe(clk, next_clk, &drvdata->clocks, list) { ++ list_del(&clk->list); ++ devm_kfree(&pdev->dev, clk); ++ } ++ devm_kfree(&pdev->dev, drvdata->desc); ++ devm_kfree(&pdev->dev, drvdata); ++ platform_set_drvdata(pdev, NULL); ++} ++EXPORT_SYMBOL(msmbus_coresight_remove_adhoc); ++ ++static int buspm_of_get_clk_adhoc(struct device_node *of_node, ++ struct msmbus_coresight_adhoc_drvdata *drvdata, int id) ++{ ++ struct msmbus_coresight_adhoc_clock_drvdata *clk; ++ clk = devm_kzalloc(drvdata->dev, sizeof(*clk), GFP_KERNEL); ++ ++ if (!clk) ++ return -ENOMEM; ++ ++ clk->id = id; ++ ++ clk->clk = of_clk_get_by_name(of_node, "bus_clk"); ++ if (IS_ERR(clk->clk)) { ++ pr_err("Error: unable to get clock for coresight node %d\n", ++ id); ++ goto err; ++ } ++ ++ list_add(&clk->list, &drvdata->clocks); ++ return 0; ++ ++err: ++ devm_kfree(drvdata->dev, clk); ++ return -EINVAL; ++} ++ ++int msmbus_coresight_init_adhoc(struct platform_device *pdev, ++ struct device_node *of_node) ++{ ++ int ret; ++ struct device *dev = &pdev->dev; ++ struct coresight_platform_data *pdata; ++ struct msmbus_coresight_adhoc_drvdata *drvdata; ++ struct coresight_desc *desc; ++ ++ pdata = of_get_coresight_platform_data(dev, of_node); ++ if (IS_ERR(pdata)) ++ return PTR_ERR(pdata); ++ ++ drvdata = platform_get_drvdata(pdev); ++ if (IS_ERR_OR_NULL(drvdata)) { ++ drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL); ++ if (!drvdata) { ++ pr_err("coresight: Alloc for drvdata failed\n"); ++ return -ENOMEM; ++ } ++ INIT_LIST_HEAD(&drvdata->clocks); ++ drvdata->dev = &pdev->dev; ++ platform_set_drvdata(pdev, drvdata); ++ } ++ ret = buspm_of_get_clk_adhoc(of_node, drvdata, pdata->id); ++ if (ret) { ++ pr_err("Error getting clocks\n"); ++ ret = -ENXIO; ++ goto err1; ++ } ++ ++ desc = devm_kzalloc(dev, sizeof(*desc), GFP_KERNEL); ++ if (!desc) { ++ pr_err("coresight: Error allocating memory\n"); ++ ret = -ENOMEM; ++ goto err1; ++ } ++ ++ desc->type = CORESIGHT_DEV_TYPE_SOURCE; ++ desc->subtype.source_subtype = CORESIGHT_DEV_SUBTYPE_SOURCE_BUS; ++ desc->ops = &msmbus_coresight_cs_ops; ++ desc->pdata = pdata; ++ desc->dev = &pdev->dev; ++ desc->owner = THIS_MODULE; ++ drvdata->desc = desc; ++ drvdata->csdev = coresight_register(desc); ++ if (IS_ERR(drvdata->csdev)) { ++ pr_err("coresight: Coresight register failed\n"); ++ ret = PTR_ERR(drvdata->csdev); ++ goto err0; ++ } ++ ++ dev_info(dev, "msmbus_coresight initialized\n"); ++ ++ return 0; ++err0: ++ devm_kfree(dev, desc); ++err1: ++ devm_kfree(dev, drvdata); ++ platform_set_drvdata(pdev, NULL); ++ return ret; ++} ++EXPORT_SYMBOL(msmbus_coresight_init_adhoc); ++ ++MODULE_LICENSE("GPL v2"); ++MODULE_DESCRIPTION("MSM BusPM Adhoc CoreSight Driver"); +--- /dev/null ++++ b/drivers/bus/msm_bus/rpm-smd.h +@@ -0,0 +1,268 @@ ++/* Copyright (c) 2012, 2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ */ ++ ++#ifndef __ARCH_ARM_MACH_MSM_RPM_SMD_H ++#define __ARCH_ARM_MACH_MSM_RPM_SMD_H ++ ++/** ++ * enum msm_rpm_set - RPM enumerations for sleep/active set ++ * %MSM_RPM_CTX_SET_0: Set resource parameters for active mode. ++ * %MSM_RPM_CTX_SET_SLEEP: Set resource parameters for sleep. ++ */ ++enum msm_rpm_set { ++ MSM_RPM_CTX_ACTIVE_SET, ++ MSM_RPM_CTX_SLEEP_SET, ++}; ++ ++struct msm_rpm_request; ++ ++struct msm_rpm_kvp { ++ uint32_t key; ++ uint32_t length; ++ uint8_t *data; ++}; ++#ifdef CONFIG_MSM_RPM_SMD ++/** ++ * msm_rpm_request() - Creates a parent element to identify the ++ * resource on the RPM, that stores the KVPs for different fields modified ++ * for a hardware resource ++ * ++ * @set: if the device is setting the active/sleep set parameter ++ * for the resource ++ * @rsc_type: unsigned 32 bit integer that identifies the type of the resource ++ * @rsc_id: unsigned 32 bit that uniquely identifies a resource within a type ++ * @num_elements: number of KVPs pairs associated with the resource ++ * ++ * returns pointer to a msm_rpm_request on success, NULL on error ++ */ ++struct msm_rpm_request *msm_rpm_create_request( ++ enum msm_rpm_set set, uint32_t rsc_type, ++ uint32_t rsc_id, int num_elements); ++ ++/** ++ * msm_rpm_request_noirq() - Creates a parent element to identify the ++ * resource on the RPM, that stores the KVPs for different fields modified ++ * for a hardware resource. This function is similar to msm_rpm_create_request ++ * except that it has to be called with interrupts masked. ++ * ++ * @set: if the device is setting the active/sleep set parameter ++ * for the resource ++ * @rsc_type: unsigned 32 bit integer that identifies the type of the resource ++ * @rsc_id: unsigned 32 bit that uniquely identifies a resource within a type ++ * @num_elements: number of KVPs pairs associated with the resource ++ * ++ * returns pointer to a msm_rpm_request on success, NULL on error ++ */ ++struct msm_rpm_request *msm_rpm_create_request_noirq( ++ enum msm_rpm_set set, uint32_t rsc_type, ++ uint32_t rsc_id, int num_elements); ++ ++/** ++ * msm_rpm_add_kvp_data() - Adds a Key value pair to a existing RPM resource. ++ * ++ * @handle: RPM resource handle to which the data should be appended ++ * @key: unsigned integer identify the parameter modified ++ * @data: byte array that contains the value corresponding to key. ++ * @size: size of data in bytes. ++ * ++ * returns 0 on success or errno ++ */ ++int msm_rpm_add_kvp_data(struct msm_rpm_request *handle, ++ uint32_t key, const uint8_t *data, int size); ++ ++/** ++ * msm_rpm_add_kvp_data_noirq() - Adds a Key value pair to a existing RPM ++ * resource. This function is similar to msm_rpm_add_kvp_data except that it ++ * has to be called with interrupts masked. ++ * ++ * @handle: RPM resource handle to which the data should be appended ++ * @key: unsigned integer identify the parameter modified ++ * @data: byte array that contains the value corresponding to key. ++ * @size: size of data in bytes. ++ * ++ * returns 0 on success or errno ++ */ ++int msm_rpm_add_kvp_data_noirq(struct msm_rpm_request *handle, ++ uint32_t key, const uint8_t *data, int size); ++ ++/** msm_rpm_free_request() - clean up the RPM request handle created with ++ * msm_rpm_create_request ++ * ++ * @handle: RPM resource handle to be cleared. ++ */ ++ ++void msm_rpm_free_request(struct msm_rpm_request *handle); ++ ++/** ++ * msm_rpm_send_request() - Send the RPM messages using SMD. The function ++ * assigns a message id before sending the data out to the RPM. RPM hardware ++ * uses the message id to acknowledge the messages. ++ * ++ * @handle: pointer to the msm_rpm_request for the resource being modified. ++ * ++ * returns non-zero message id on success and zero on a failed transaction. ++ * The drivers use message id to wait for ACK from RPM. ++ */ ++int msm_rpm_send_request(struct msm_rpm_request *handle); ++ ++/** ++ * msm_rpm_send_request_noirq() - Send the RPM messages using SMD. The ++ * function assigns a message id before sending the data out to the RPM. ++ * RPM hardware uses the message id to acknowledge the messages. This function ++ * is similar to msm_rpm_send_request except that it has to be called with ++ * interrupts masked. ++ * ++ * @handle: pointer to the msm_rpm_request for the resource being modified. ++ * ++ * returns non-zero message id on success and zero on a failed transaction. ++ * The drivers use message id to wait for ACK from RPM. ++ */ ++int msm_rpm_send_request_noirq(struct msm_rpm_request *handle); ++ ++/** ++ * msm_rpm_wait_for_ack() - A blocking call that waits for acknowledgment of ++ * a message from RPM. ++ * ++ * @msg_id: the return from msm_rpm_send_requests ++ * ++ * returns 0 on success or errno ++ */ ++int msm_rpm_wait_for_ack(uint32_t msg_id); ++ ++/** ++ * msm_rpm_wait_for_ack_noirq() - A blocking call that waits for acknowledgment ++ * of a message from RPM. This function is similar to msm_rpm_wait_for_ack ++ * except that it has to be called with interrupts masked. ++ * ++ * @msg_id: the return from msm_rpm_send_request ++ * ++ * returns 0 on success or errno ++ */ ++int msm_rpm_wait_for_ack_noirq(uint32_t msg_id); ++ ++/** ++ * msm_rpm_send_message() -Wrapper function for clients to send data given an ++ * array of key value pairs. ++ * ++ * @set: if the device is setting the active/sleep set parameter ++ * for the resource ++ * @rsc_type: unsigned 32 bit integer that identifies the type of the resource ++ * @rsc_id: unsigned 32 bit that uniquely identifies a resource within a type ++ * @kvp: array of KVP data. ++ * @nelem: number of KVPs pairs associated with the message. ++ * ++ * returns 0 on success and errno on failure. ++ */ ++int msm_rpm_send_message(enum msm_rpm_set set, uint32_t rsc_type, ++ uint32_t rsc_id, struct msm_rpm_kvp *kvp, int nelems); ++ ++/** ++ * msm_rpm_send_message_noirq() -Wrapper function for clients to send data ++ * given an array of key value pairs. This function is similar to the ++ * msm_rpm_send_message() except that it has to be called with interrupts ++ * disabled. Clients should choose the irq version when possible for system ++ * performance. ++ * ++ * @set: if the device is setting the active/sleep set parameter ++ * for the resource ++ * @rsc_type: unsigned 32 bit integer that identifies the type of the resource ++ * @rsc_id: unsigned 32 bit that uniquely identifies a resource within a type ++ * @kvp: array of KVP data. ++ * @nelem: number of KVPs pairs associated with the message. ++ * ++ * returns 0 on success and errno on failure. ++ */ ++int msm_rpm_send_message_noirq(enum msm_rpm_set set, uint32_t rsc_type, ++ uint32_t rsc_id, struct msm_rpm_kvp *kvp, int nelems); ++ ++/** ++ * msm_rpm_driver_init() - Initialization function that registers for a ++ * rpm platform driver. ++ * ++ * returns 0 on success. ++ */ ++int __init msm_rpm_driver_init(void); ++ ++#else ++ ++static inline struct msm_rpm_request *msm_rpm_create_request( ++ enum msm_rpm_set set, uint32_t rsc_type, ++ uint32_t rsc_id, int num_elements) ++{ ++ return NULL; ++} ++ ++static inline struct msm_rpm_request *msm_rpm_create_request_noirq( ++ enum msm_rpm_set set, uint32_t rsc_type, ++ uint32_t rsc_id, int num_elements) ++{ ++ return NULL; ++ ++} ++static inline uint32_t msm_rpm_add_kvp_data(struct msm_rpm_request *handle, ++ uint32_t key, const uint8_t *data, int count) ++{ ++ return 0; ++} ++static inline uint32_t msm_rpm_add_kvp_data_noirq( ++ struct msm_rpm_request *handle, uint32_t key, ++ const uint8_t *data, int count) ++{ ++ return 0; ++} ++ ++static inline void msm_rpm_free_request(struct msm_rpm_request *handle) ++{ ++ return; ++} ++ ++static inline int msm_rpm_send_request(struct msm_rpm_request *handle) ++{ ++ return 0; ++} ++ ++static inline int msm_rpm_send_request_noirq(struct msm_rpm_request *handle) ++{ ++ return 0; ++ ++} ++ ++static inline int msm_rpm_send_message(enum msm_rpm_set set, uint32_t rsc_type, ++ uint32_t rsc_id, struct msm_rpm_kvp *kvp, int nelems) ++{ ++ return 0; ++} ++ ++static inline int msm_rpm_send_message_noirq(enum msm_rpm_set set, ++ uint32_t rsc_type, uint32_t rsc_id, struct msm_rpm_kvp *kvp, ++ int nelems) ++{ ++ return 0; ++} ++ ++static inline int msm_rpm_wait_for_ack(uint32_t msg_id) ++{ ++ return 0; ++ ++} ++static inline int msm_rpm_wait_for_ack_noirq(uint32_t msg_id) ++{ ++ return 0; ++} ++ ++static inline int __init msm_rpm_driver_init(void) ++{ ++ return 0; ++} ++#endif ++#endif /*__ARCH_ARM_MACH_MSM_RPM_SMD_H*/ +--- /dev/null ++++ b/include/trace/events/trace_msm_bus.h +@@ -0,0 +1,163 @@ ++/* Copyright (c) 2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#undef TRACE_SYSTEM ++#define TRACE_SYSTEM msm_bus ++ ++#if !defined(_TRACE_MSM_BUS_H) || defined(TRACE_HEADER_MULTI_READ) ++#define _TRACE_MSM_BUS_H ++ ++#include ++ ++TRACE_EVENT(bus_update_request, ++ ++ TP_PROTO(int sec, int nsec, const char *name, unsigned int index, ++ int src, int dest, unsigned long long ab, ++ unsigned long long ib), ++ ++ TP_ARGS(sec, nsec, name, index, src, dest, ab, ib), ++ ++ TP_STRUCT__entry( ++ __field(int, sec) ++ __field(int, nsec) ++ __string(name, name) ++ __field(u32, index) ++ __field(int, src) ++ __field(int, dest) ++ __field(u64, ab) ++ __field(u64, ib) ++ ), ++ ++ TP_fast_assign( ++ __entry->sec = sec; ++ __entry->nsec = nsec; ++ __assign_str(name, name); ++ __entry->index = index; ++ __entry->src = src; ++ __entry->dest = dest; ++ __entry->ab = ab; ++ __entry->ib = ib; ++ ), ++ ++ TP_printk("time= %d.%d name=%s index=%u src=%d dest=%d ab=%llu ib=%llu", ++ __entry->sec, ++ __entry->nsec, ++ __get_str(name), ++ (unsigned int)__entry->index, ++ __entry->src, ++ __entry->dest, ++ (unsigned long long)__entry->ab, ++ (unsigned long long)__entry->ib) ++); ++ ++TRACE_EVENT(bus_bimc_config_limiter, ++ ++ TP_PROTO(int mas_id, unsigned long long cur_lim_bw), ++ ++ TP_ARGS(mas_id, cur_lim_bw), ++ ++ TP_STRUCT__entry( ++ __field(int, mas_id) ++ __field(u64, cur_lim_bw) ++ ), ++ ++ TP_fast_assign( ++ __entry->mas_id = mas_id; ++ __entry->cur_lim_bw = cur_lim_bw; ++ ), ++ ++ TP_printk("Master=%d cur_lim_bw=%llu", ++ __entry->mas_id, ++ (unsigned long long)__entry->cur_lim_bw) ++); ++ ++TRACE_EVENT(bus_avail_bw, ++ ++ TP_PROTO(unsigned long long cur_bimc_bw, unsigned long long cur_mdp_bw), ++ ++ TP_ARGS(cur_bimc_bw, cur_mdp_bw), ++ ++ TP_STRUCT__entry( ++ __field(u64, cur_bimc_bw) ++ __field(u64, cur_mdp_bw) ++ ), ++ ++ TP_fast_assign( ++ __entry->cur_bimc_bw = cur_bimc_bw; ++ __entry->cur_mdp_bw = cur_mdp_bw; ++ ), ++ ++ TP_printk("cur_bimc_bw = %llu cur_mdp_bw = %llu", ++ (unsigned long long)__entry->cur_bimc_bw, ++ (unsigned long long)__entry->cur_mdp_bw) ++); ++ ++TRACE_EVENT(bus_rules_matches, ++ ++ TP_PROTO(int node_id, int rule_id, unsigned long long node_ab, ++ unsigned long long node_ib, unsigned long long node_clk), ++ ++ TP_ARGS(node_id, rule_id, node_ab, node_ib, node_clk), ++ ++ TP_STRUCT__entry( ++ __field(int, node_id) ++ __field(int, rule_id) ++ __field(u64, node_ab) ++ __field(u64, node_ib) ++ __field(u64, node_clk) ++ ), ++ ++ TP_fast_assign( ++ __entry->node_id = node_id; ++ __entry->rule_id = rule_id; ++ __entry->node_ab = node_ab; ++ __entry->node_ib = node_ib; ++ __entry->node_clk = node_clk; ++ ), ++ ++ TP_printk("Rule match node%d rule%d node-ab%llu:ib%llu:clk%llu", ++ __entry->node_id, __entry->rule_id, ++ (unsigned long long)__entry->node_ab, ++ (unsigned long long)__entry->node_ib, ++ (unsigned long long)__entry->node_clk) ++); ++ ++TRACE_EVENT(bus_bke_params, ++ ++ TP_PROTO(u32 gc, u32 gp, u32 thl, u32 thm, u32 thh), ++ ++ TP_ARGS(gc, gp, thl, thm, thh), ++ ++ TP_STRUCT__entry( ++ __field(u32, gc) ++ __field(u32, gp) ++ __field(u32, thl) ++ __field(u32, thm) ++ __field(u32, thh) ++ ), ++ ++ TP_fast_assign( ++ __entry->gc = gc; ++ __entry->gp = gp; ++ __entry->thl = thl; ++ __entry->thm = thm; ++ __entry->thh = thh; ++ ), ++ ++ TP_printk("BKE Params GC=0x%x GP=0x%x THL=0x%x THM=0x%x THH=0x%x", ++ __entry->gc, __entry->gp, __entry->thl, __entry->thm, ++ __entry->thh) ++); ++ ++#endif ++#define TRACE_INCLUDE_FILE trace_msm_bus ++#include diff --git a/target/linux/ipq806x/patches-4.14/850-soc-add-qualcomm-syscon.patch b/target/linux/ipq806x/patches-4.14/850-soc-add-qualcomm-syscon.patch new file mode 100644 index 0000000000..c6a9176835 --- /dev/null +++ b/target/linux/ipq806x/patches-4.14/850-soc-add-qualcomm-syscon.patch @@ -0,0 +1,177 @@ +From: Christian Lamparter +Subject: SoC: add qualcomm syscon +--- a/drivers/soc/qcom/Makefile ++++ b/drivers/soc/qcom/Makefile +@@ -9,3 +9,4 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_st + obj-$(CONFIG_QCOM_SMP2P) += smp2p.o + obj-$(CONFIG_QCOM_SMSM) += smsm.o + obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o ++obj-$(CONFIG_QCOM_TCSR) += qcom_tcsr.o +--- a/drivers/soc/qcom/Kconfig ++++ b/drivers/soc/qcom/Kconfig +@@ -78,6 +78,13 @@ config QCOM_SMSM + Say yes here to support the Qualcomm Shared Memory State Machine. + The state machine is represented by bits in shared memory. + ++config QCOM_TCSR ++ tristate "QCOM Top Control and Status Registers" ++ depends on ARCH_QCOM ++ help ++ Say y here to enable TCSR support. The TCSR provides control ++ functions for various peripherals. ++ + config QCOM_WCNSS_CTRL + tristate "Qualcomm WCNSS control driver" + depends on ARCH_QCOM +--- /dev/null ++++ b/drivers/soc/qcom/qcom_tcsr.c +@@ -0,0 +1,98 @@ ++/* ++ * Copyright (c) 2014, The Linux foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License rev 2 and ++ * only rev 2 as published by the free Software foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define TCSR_USB_PORT_SEL 0xb0 ++#define TCSR_USB_HSPHY_CONFIG 0xC ++ ++#define TCSR_ESS_INTERFACE_SEL_OFFSET 0x0 ++#define TCSR_ESS_INTERFACE_SEL_MASK 0xf ++ ++#define TCSR_WIFI0_GLB_CFG_OFFSET 0x0 ++#define TCSR_WIFI1_GLB_CFG_OFFSET 0x4 ++#define TCSR_PNOC_SNOC_MEMTYPE_M0_M2 0x4 ++ ++static int tcsr_probe(struct platform_device *pdev) ++{ ++ struct resource *res; ++ const struct device_node *node = pdev->dev.of_node; ++ void __iomem *base; ++ u32 val; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ base = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(base)) ++ return PTR_ERR(base); ++ ++ if (!of_property_read_u32(node, "qcom,usb-ctrl-select", &val)) { ++ dev_err(&pdev->dev, "setting usb port select = %d\n", val); ++ writel(val, base + TCSR_USB_PORT_SEL); ++ } ++ ++ if (!of_property_read_u32(node, "qcom,usb-hsphy-mode-select", &val)) { ++ dev_info(&pdev->dev, "setting usb hs phy mode select = %x\n", val); ++ writel(val, base + TCSR_USB_HSPHY_CONFIG); ++ } ++ ++ if (!of_property_read_u32(node, "qcom,ess-interface-select", &val)) { ++ u32 tmp = 0; ++ dev_info(&pdev->dev, "setting ess interface select = %x\n", val); ++ tmp = readl(base + TCSR_ESS_INTERFACE_SEL_OFFSET); ++ tmp = tmp & (~TCSR_ESS_INTERFACE_SEL_MASK); ++ tmp = tmp | (val&TCSR_ESS_INTERFACE_SEL_MASK); ++ writel(tmp, base + TCSR_ESS_INTERFACE_SEL_OFFSET); ++ } ++ ++ if (!of_property_read_u32(node, "qcom,wifi_glb_cfg", &val)) { ++ dev_info(&pdev->dev, "setting wifi_glb_cfg = %x\n", val); ++ writel(val, base + TCSR_WIFI0_GLB_CFG_OFFSET); ++ writel(val, base + TCSR_WIFI1_GLB_CFG_OFFSET); ++ } ++ ++ if (!of_property_read_u32(node, "qcom,wifi_noc_memtype_m0_m2", &val)) { ++ dev_info(&pdev->dev, ++ "setting wifi_noc_memtype_m0_m2 = %x\n", val); ++ writel(val, base + TCSR_PNOC_SNOC_MEMTYPE_M0_M2); ++ } ++ ++ return 0; ++} ++ ++static const struct of_device_id tcsr_dt_match[] = { ++ { .compatible = "qcom,tcsr", }, ++ { }, ++}; ++ ++MODULE_DEVICE_TABLE(of, tcsr_dt_match); ++ ++static struct platform_driver tcsr_driver = { ++ .driver = { ++ .name = "tcsr", ++ .owner = THIS_MODULE, ++ .of_match_table = tcsr_dt_match, ++ }, ++ .probe = tcsr_probe, ++}; ++ ++module_platform_driver(tcsr_driver); ++ ++MODULE_AUTHOR("Andy Gross "); ++MODULE_DESCRIPTION("QCOM TCSR driver"); ++MODULE_LICENSE("GPL v2"); +--- /dev/null ++++ b/include/dt-bindings/soc/qcom,tcsr.h +@@ -0,0 +1,48 @@ ++/* Copyright (c) 2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++#ifndef __DT_BINDINGS_QCOM_TCSR_H ++#define __DT_BINDINGS_QCOM_TCSR_H ++ ++#define TCSR_USB_SELECT_USB3_P0 0x1 ++#define TCSR_USB_SELECT_USB3_P1 0x2 ++#define TCSR_USB_SELECT_USB3_DUAL 0x3 ++ ++/* IPQ40xx HS PHY Mode Select */ ++#define TCSR_USB_HSPHY_HOST_MODE 0x00E700E7 ++#define TCSR_USB_HSPHY_DEVICE_MODE 0x00C700E7 ++ ++/* IPQ40xx ess interface mode select */ ++#define TCSR_ESS_PSGMII 0 ++#define TCSR_ESS_PSGMII_RGMII5 1 ++#define TCSR_ESS_PSGMII_RMII0 2 ++#define TCSR_ESS_PSGMII_RMII1 4 ++#define TCSR_ESS_PSGMII_RMII0_RMII1 6 ++#define TCSR_ESS_PSGMII_RGMII4 9 ++ ++/* ++ * IPQ40xx WiFi Global Config ++ * Bit 30:AXID_EN ++ * Enable AXI master bus Axid translating to confirm all txn submitted by order ++ * Bit 24: Use locally generated socslv_wxi_bvalid ++ * 1: use locally generate socslv_wxi_bvalid for performance. ++ * 0: use SNOC socslv_wxi_bvalid. ++ */ ++#define TCSR_WIFI_GLB_CFG 0x41000000 ++ ++/* IPQ40xx MEM_TYPE_SEL_M0_M2 Select Bit 26:24 - 2 NORMAL */ ++#define TCSR_WIFI_NOC_MEMTYPE_M0_M2 0x02222222 ++ ++/* TCSR A/B REG */ ++#define IPQ806X_TCSR_REG_A_ADM_CRCI_MUX_SEL 0 ++#define IPQ806X_TCSR_REG_B_ADM_CRCI_MUX_SEL 1 ++ ++#endif