From: Jon Nettleton Date: Mon, 28 May 2018 10:35:15 +0000 (+0300) Subject: arm: mvebu: enable sata support for clearfog X-Git-Tag: v2018.07-rc2~99^2~9 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=d6db446f70c56de5cf57077fdb2329aaa58b740d;p=oweals%2Fu-boot.git arm: mvebu: enable sata support for clearfog The a38x sata interfaces run in ahci mode and can be accessed via the scsi command. Signed-off-by: Jon Nettleton [baruch: rebase on current upstream] Signed-off-by: Baruch Siach Reviewed-by: Stefan Roese Signed-off-by: Stefan Roese --- diff --git a/configs/clearfog_defconfig b/configs/clearfog_defconfig index fc1ff64be1..e471c876fa 100644 --- a/configs/clearfog_defconfig +++ b/configs/clearfog_defconfig @@ -35,6 +35,7 @@ CONFIG_CMD_TIME=y CONFIG_ENV_IS_IN_MMC=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_OF_TRANSLATE=y +CONFIG_SCSI_AHCI=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_MV=y @@ -46,6 +47,7 @@ CONFIG_PHY_MARVELL=y CONFIG_PHY_GIGE=y CONFIG_MVNETA=y CONFIG_PCI=y +CONFIG_SCSI=y CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYS_NS16550=y CONFIG_KIRKWOOD_SPI=y diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h index f57f9b21ab..ed6f000db1 100644 --- a/include/configs/clearfog.h +++ b/include/configs/clearfog.h @@ -62,6 +62,15 @@ #define CONFIG_PCI_SCAN_SHOW #endif +/* SATA support */ +#ifdef CONFIG_SCSI +#define CONFIG_SCSI_AHCI_PLAT +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 +#define CONFIG_SYS_SCSI_MAX_LUN 1 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) +#endif + /* Keep device tree and initrd in lower memory so the kernel can access them */ #define RELOCATION_LIMITS_ENV_SETTINGS \ "fdt_high=0x10000000\0" \