From: Yuantian Tang Date: Wed, 10 Apr 2019 08:43:33 +0000 (+0800) Subject: armv8: ls1028a: Add NXP LS1028A SoC support X-Git-Tag: v2019.07-rc3~12^2~15 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=d4ad111dc4da561d1638f5edb87fa2e6012300d8;p=oweals%2Fu-boot.git armv8: ls1028a: Add NXP LS1028A SoC support Ls1028a SoC is based on Layerscape Chassis Generation 3.2 architecture with features: 2 ARM v8 Cortex-A72 cores, CCI400, SEC, DDR3L/4, LCD, GPU, TSN ENETC, 2 USB 3.0, 2 eSDHC, 2 FlexCAN, 2 SPI, SATA, 8 I2C controllers, 6 LPUARTs, GPIO, SAI, qDMA, eDMA, GIC, TMU etc. Signed-off-by: Sudhanshu Gupta Signed-off-by: Rai Harninder Signed-off-by: Rajesh Bhagat Signed-off-by: Bhaskar Upadhaya Signed-off-by: Tang Yuantian Reviewed-by: Prabhakar Kushwaha --- diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index d37e3678e7..a843c1eb65 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -20,6 +20,40 @@ config ARCH_LS1012A select SYS_I2C_MXC_I2C2 imply PANIC_HANG +config ARCH_LS1028A + bool + select ARMV8_SET_SMPEN + select FSL_LSCH3 + select NXP_LSCH3_2 + select SYS_FSL_HAS_CCI400 + select SYS_FSL_SRDS_1 + select SYS_HAS_SERDES + select SYS_FSL_DDR + select SYS_FSL_DDR_LE + select SYS_FSL_DDR_VER_50 + select SYS_FSL_HAS_DDR3 + select SYS_FSL_HAS_DDR4 + select SYS_FSL_HAS_SEC + select SYS_FSL_SEC_COMPAT_5 + select SYS_FSL_SEC_LE + select FSL_TZASC_1 + select ARCH_EARLY_INIT_R + select BOARD_EARLY_INIT_F + select SYS_I2C_MXC + select SYS_I2C_MXC_I2C1 + select SYS_I2C_MXC_I2C2 + select SYS_I2C_MXC_I2C3 + select SYS_I2C_MXC_I2C4 + select SYS_I2C_MXC_I2C5 + select SYS_I2C_MXC_I2C6 + select SYS_I2C_MXC_I2C7 + select SYS_I2C_MXC_I2C8 + select SYS_FSL_ERRATUM_A009007 + select SYS_FSL_ERRATUM_A008514 if !TFABOOT + select SYS_FSL_ERRATUM_A009663 if !TFABOOT + select SYS_FSL_ERRATUM_A009942 if !TFABOOT + imply PANIC_HANG + config ARCH_LS1043A bool select ARMV8_SET_SMPEN @@ -244,6 +278,7 @@ config FSL_PCIE_COMPAT string "PCIe compatible of Kernel DT" depends on PCIE_LAYERSCAPE || PCIE_LAYERSCAPE_GEN4 default "fsl,ls1012a-pcie" if ARCH_LS1012A + default "fsl,ls1028a-pcie" if ARCH_LS1028A default "fsl,ls1043a-pcie" if ARCH_LS1043A default "fsl,ls1046a-pcie" if ARCH_LS1046A default "fsl,ls2080a-pcie" if ARCH_LS2080A @@ -343,6 +378,7 @@ config SYS_FSL_ERRATUM_A010539 config MAX_CPUS int "Maximum number of CPUs permitted for Layerscape" + default 2 if ARCH_LS1028A default 4 if ARCH_LS1043A default 4 if ARCH_LS1046A default 16 if ARCH_LS2080A @@ -377,7 +413,7 @@ config QSPI_AHB_INIT config SYS_CCI400_OFFSET hex "Offset for CCI400 base" depends on SYS_FSL_HAS_CCI400 - default 0x3090000 if ARCH_LS1088A + default 0x3090000 if ARCH_LS1088A || ARCH_LS1028A default 0x180000 if FSL_LSCH2 help Offset for CCI400 base @@ -446,6 +482,7 @@ config CLUSTER_CLK_FREQ config SYS_FSL_PCLK_DIV int "Platform clock divider" + default 1 if ARCH_LS1028A default 1 if ARCH_LS1043A default 1 if ARCH_LS1046A default 1 if ARCH_LS1088A diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile index e9bc987a9c..a8d3cf91fc 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile +++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile @@ -48,3 +48,7 @@ endif ifneq ($(CONFIG_ARCH_LS1088A),) obj-$(CONFIG_SYS_HAS_SERDES) += ls1088a_serdes.o endif + +ifneq ($(CONFIG_ARCH_LS1028A),) +obj-$(CONFIG_SYS_HAS_SERDES) += ls1028a_serdes.o +endif diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index 9801e64867..bbe3c88d4a 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -58,6 +58,7 @@ static struct cpu_type cpu_type_list[] = { CPU_TYPE_ENTRY(LS1026A, LS1026A, 2), CPU_TYPE_ENTRY(LS2040A, LS2040A, 4), CPU_TYPE_ENTRY(LS1012A, LS1012A, 1), + CPU_TYPE_ENTRY(LS1028A, LS1028A, 2), CPU_TYPE_ENTRY(LS1088A, LS1088A, 8), CPU_TYPE_ENTRY(LS1084A, LS1084A, 8), CPU_TYPE_ENTRY(LS1048A, LS1048A, 4), @@ -246,11 +247,13 @@ static struct mm_region final_map[] = { PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN }, +#ifdef CONFIG_SYS_PCIE3_PHYS_ADDR { CONFIG_SYS_PCIE3_PHYS_ADDR, CONFIG_SYS_PCIE3_PHYS_ADDR, CONFIG_SYS_PCIE3_PHYS_SIZE, PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN }, +#endif #ifdef CONFIG_SYS_PCIE4_PHYS_ADDR { CONFIG_SYS_PCIE4_PHYS_ADDR, CONFIG_SYS_PCIE4_PHYS_ADDR, CONFIG_SYS_PCIE4_PHYS_SIZE, @@ -355,11 +358,13 @@ static struct mm_region final_map[] = { PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN }, +#ifdef CONFIG_SYS_PCIE3_PHYS_ADDR { CONFIG_SYS_PCIE3_PHYS_ADDR, CONFIG_SYS_PCIE3_PHYS_ADDR, CONFIG_SYS_PCIE3_PHYS_SIZE, PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN }, +#endif { CONFIG_SYS_FSL_DRAM_BASE3, CONFIG_SYS_FSL_DRAM_BASE3, CONFIG_SYS_FSL_DRAM_SIZE3, PTE_BLOCK_MEMTYPE(MT_NORMAL) | @@ -462,11 +467,13 @@ static void fix_pcie_mmu_map(void) final_map[i].virt = 0x2800000000ULL; final_map[i].size = 0x800000000ULL; break; +#ifdef CONFIG_SYS_PCIE3_PHYS_ADDR case CONFIG_SYS_PCIE3_PHYS_ADDR: final_map[i].phys = 0x3000000000ULL; final_map[i].virt = 0x3000000000ULL; final_map[i].size = 0x800000000ULL; break; +#endif #ifdef CONFIG_SYS_PCIE4_PHYS_ADDR case CONFIG_SYS_PCIE4_PHYS_ADDR: final_map[i].phys = 0x3800000000ULL; diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc index a0e262169e..ad55573c85 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc +++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc @@ -8,6 +8,7 @@ SoC overview 6. LS2088A 7. LS2081A 8. LX2160A + 9. LS1028A LS1043A --------- @@ -328,3 +329,53 @@ LX2160A SoC has 2 more similar SoC personalities 2)LX2080A, few difference w.r.t. LX2160A: a) Eight 64-bit ARM v8 Cortex-A72 CPUs + + +LS1028A +-------- +The QorIQ LS1028A processor integrates two 64-bit Arm Cortex-A72 cores with +a GPU and LCD controller, as well as two TSN-enabled Ethernet controllers and +a TSNenabled 4-port switch. + +The high performance Cortex-A72 cores, performing above 16,000 CoreMarks, +combined with 2.5 Gbit Ethernet, PCI express Gen 3.0, SATA 3.0, USB 3.0 and +Octal/Quad SPI interfaces provide capabilities for a number of industrial and +embedded applications. The device provides excellent integration with the +new Time-Sensitive Networking standard, and enables a number of +TSN applications. + +The LS1028A SoC includes the following function and features: + - Two 64-bit ARM v8 A72 CPUs + - Cache Coherent interconnect (CCI-400) + - One 32-bit DDR3L/DDR4 SDRAM memory controller with ECC + - eDP/Displayport interface + - Graphics processing unit + - One Configurable x4 SerDes + - Ethernet interfaces + - Non-switched: One Ethernet MAC supporting 2.5G, 1G, 100M, 10M, one + ethernet MAC supporting 1G, 100M, 10M. + - Switched: TSN IP to support four 2.5/1G interfaces. + - None of the MACs support MACSEC + - Support for RGMII, SGMII (and 1000Base-KX), SGMII 2.5x, QSGMII + - Support for 10G-SXGMII and 10G-QXGMII. + - Energy efficient Ethernet support (802.3az) + - IEEE 1588 support + - High-speed peripheral interfaces + - Two PCIe 3.0 controllers, one supporting x4 operation + - One serial ATA (SATA 3.0) controller + - Additional peripheral interfaces + - Two high-speed USB 2.0/3.0 controllers with integrated PHY each + supporting host or device modes + - Two Enhanced secure digital host controllers (SD/SDIO/eMMC) + - Two Serial peripheral interface (SPI) controllers + - Eight I2C controllers + - Two UART controllers + - Additional six Industrual UARTs (LPUART). + - One FlexSPI controller + - General Purpose IO (GPIO) + - Two CAN-FD interfaces + - Eight Flextimers with PWM I/O + - Support for hardware virtualization and partitioning enforcement + - Layerscape Trust Architecture + - Service Processor (SP) provides pre-boot initialization and secure-boot + capabilities diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1028a_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1028a_serdes.c new file mode 100644 index 0000000000..ef598c4cba --- /dev/null +++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1028a_serdes.c @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 NXP + */ + +#include +#include + +struct serdes_config { + u32 protocol; + u8 lanes[SRDS_MAX_LANES]; + u8 rcw_lanes[SRDS_MAX_LANES]; +}; + +static struct serdes_config serdes1_cfg_tbl[] = { + /* SerDes 1 */ + {0xCC5B, {PCIE1, QSGMII_B, PCIE2, PCIE2} }, + {0xEB99, {SGMII1, SGMII1, PCIE2, SATA1} }, + {0xCC99, {SGMII1, SGMII1, PCIE2, PCIE2} }, + {0xBB99, {SGMII1, SGMII1, PCIE2, PCIE1} }, + {0x9999, {SGMII1, SGMII2, SGMII3, SGMII4} }, + {0xEBCC, {PCIE1, PCIE1, PCIE2, SATA1} }, + {0xCCCC, {PCIE1, PCIE1, PCIE2, PCIE2} }, + {0xDDDD, {PCIE1, PCIE1, PCIE1, PCIE1} }, + {} +}; + +static struct serdes_config *serdes_cfg_tbl[] = { + serdes1_cfg_tbl, +}; + +enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane) +{ + struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->protocol) { + if (ptr->protocol == cfg) + return ptr->lanes[lane]; + ptr++; + } + + return 0; +} + +int is_serdes_prtcl_valid(int serdes, u32 prtcl) +{ + int i; + struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->protocol) { + if (ptr->protocol == prtcl) + break; + ptr++; + } + + if (!ptr->protocol) + return 0; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (ptr->lanes[i] != NONE) + return 1; + } + + return 0; +} diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi new file mode 100644 index 0000000000..1274d2c784 --- /dev/null +++ b/arch/arm/dts/fsl-ls1028a.dtsi @@ -0,0 +1,280 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP ls1028a SOC common device tree source + * + * Copyright 2019 NXP + * + */ + +/ { + compatible = "fsl,ls1028a"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + sysclk: sysclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "sysclk"; + }; + + clockgen: clocking@1300000 { + compatible = "fsl,ls1028a-clockgen"; + reg = <0x0 0x1300000 0x0 0xa0000>; + #clock-cells = <2>; + clocks = <&sysclk>; + }; + + memory@01080000 { + device_type = "memory"; + reg = <0x00000000 0x01080000 0 0x80000000>; + /* DRAM space - 1, size : 2 GB DRAM */ + }; + + gic: interrupt-controller@6000000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ + <0x0 0x06040000 0 0x40000>; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <1 9 0x4>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */ + <1 14 0x8>, /* Physical Non-Secure PPI, active-low */ + <1 11 0x8>, /* Virtual PPI, active-low */ + <1 10 0x8>; /* Hypervisor PPI, active-low */ + }; + + fspi: flexspi@20C0000 { + compatible = "nxp,dn-fspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20C0000 0x0 0x10000>, + <0x0 0x20000000 0x0 0x10000000>; /*64MB flash*/ + reg-names = "FSPI", "FSPI-memory"; + num-cs = <1>; + status = "disabled"; + }; + + serial0: serial@21c0500 { + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0500 0x0 0x100>; + interrupts = <0 32 0x1>; /* edge triggered */ + status = "disabled"; + }; + + serial1: serial@21c0600 { + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0600 0x0 0x100>; + interrupts = <0 32 0x1>; /* edge triggered */ + status = "disabled"; + }; + + pcie@3400000 { + compatible = "fsl,ls-pcie", "fsl,ls1028-pcie", "snps,dw-pcie"; + reg = <0x00 0x03400000 0x0 0x80000 + 0x00 0x03480000 0x0 0x40000 /* lut registers */ + 0x00 0x034c0000 0x0 0x40000 /* pf controls registers */ + 0x80 0x00000000 0x0 0x20000>; /* configuration space */ + reg-names = "dbi", "lut", "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x80 0x00020000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + }; + + pcie@3500000 { + compatible = "fsl,ls-pcie", "fsl,ls1028-pcie", "snps,dw-pcie"; + reg = <0x00 0x03500000 0x0 0x80000 + 0x00 0x03580000 0x0 0x40000 /* lut registers */ + 0x00 0x035c0000 0x0 0x40000 /* pf controls registers */ + 0x88 0x00000000 0x0 0x20000>; /* configuration space */ + reg-names = "dbi", "lut", "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x88 0x00020000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + }; + + i2c0: i2c@2000000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2000000 0x0 0x10000>; + interrupts = <0 34 0x4>; + clock-names = "i2c"; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + + i2c1: i2c@2010000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2010000 0x0 0x10000>; + interrupts = <0 34 0x4>; + clock-names = "i2c"; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + + i2c2: i2c@2020000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2020000 0x0 0x10000>; + interrupts = <0 35 0x4>; + clock-names = "i2c"; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + + i2c3: i2c@2030000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2030000 0x0 0x10000>; + interrupts = <0 35 0x4>; + clock-names = "i2c"; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + + i2c4: i2c@2040000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2040000 0x0 0x10000>; + interrupts = <0 74 0x4>; + clock-names = "i2c"; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + + i2c5: i2c@2050000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2050000 0x0 0x10000>; + interrupts = <0 74 0x4>; + clock-names = "i2c"; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + + i2c6: i2c@2060000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2060000 0x0 0x10000>; + interrupts = <0 75 0x4>; + clock-names = "i2c"; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + + i2c7: i2c@2070000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2070000 0x0 0x10000>; + interrupts = <0 75 0x4>; + clock-names = "i2c"; + clocks = <&clockgen 4 0>; + status = "disabled"; + }; + + usb1: usb3@3100000 { + compatible = "fsl,layerscape-dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <0 80 0x4>; + dr_mode = "host"; + status = "disabled"; + }; + + usb2: usb3@3110000 { + compatible = "fsl,layerscape-dwc3"; + reg = <0x0 0x3110000 0x0 0x10000>; + interrupts = <0 81 0x4>; + dr_mode = "host"; + status = "disabled"; + }; + + dspi0: dspi@2100000 { + compatible = "fsl,vf610-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2100000 0x0 0x10000>; + interrupts = <0 26 0x4>; + clock-names = "dspi"; + clocks = <&clockgen 4 0>; + num-cs = <5>; + litte-endian; + status = "disabled"; + }; + + dspi1: dspi@2110000 { + compatible = "fsl,vf610-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2110000 0x0 0x10000>; + interrupts = <0 26 0x4>; + clock-names = "dspi"; + clocks = <&clockgen 4 0>; + num-cs = <5>; + little-endian; + status = "disabled"; + }; + + dspi2: dspi@2120000 { + compatible = "fsl,vf610-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2120000 0x0 0x10000>; + interrupts = <0 26 0x4>; + clock-names = "dspi"; + clocks = <&clockgen 4 0>; + num-cs = <5>; + little-endian; + status = "disabled"; + }; + + esdhc0: esdhc@2140000 { + compatible = "fsl,esdhc"; + reg = <0x0 0x2140000 0x0 0x10000>; + interrupts = <0 28 0x4>; + big-endian; + bus-width = <4>; + status = "disabled"; + }; + + esdhc1: esdhc@2150000 { + compatible = "fsl,esdhc"; + reg = <0x0 0x2150000 0x0 0x10000>; + interrupts = <0 63 0x4>; + big-endian; + non-removable; + bus-width = <4>; + status = "disabled"; + }; + + sata: sata@3200000 { + compatible = "fsl,ls1028a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>; + interrupts = <0 133 4>; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; +}; diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h index 903d5096c7..eb21c09e01 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/config.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h @@ -229,6 +229,67 @@ #define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1 +#elif defined(CONFIG_ARCH_LS1028A) +#define CONFIG_SYS_FSL_NUM_CC_PLLS 3 +#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1 } +#define CONFIG_GICV3 +#define CONFIG_FSL_TZPC_BP147 +#define CONFIG_FSL_TZASC_400 + +/* TZ Protection Controller Definitions */ +#define TZPC_BASE 0x02200000 +#define TZPCR0SIZE_BASE (TZPC_BASE) +#define TZPCDECPROT_0_STAT_BASE (TZPC_BASE + 0x800) +#define TZPCDECPROT_0_SET_BASE (TZPC_BASE + 0x804) +#define TZPCDECPROT_0_CLR_BASE (TZPC_BASE + 0x808) +#define TZPCDECPROT_1_STAT_BASE (TZPC_BASE + 0x80C) +#define TZPCDECPROT_1_SET_BASE (TZPC_BASE + 0x810) +#define TZPCDECPROT_1_CLR_BASE (TZPC_BASE + 0x814) +#define TZPCDECPROT_2_STAT_BASE (TZPC_BASE + 0x818) +#define TZPCDECPROT_2_SET_BASE (TZPC_BASE + 0x81C) +#define TZPCDECPROT_2_CLR_BASE (TZPC_BASE + 0x820) + +#define SRDS_MAX_LANES 4 + +#define CONFIG_SYS_FSL_OCRAM_BASE 0x18000000 /* initial RAM */ +#define SYS_FSL_OCRAM_SPACE_SIZE 0x00200000 /* 2M */ +#define CONFIG_SYS_FSL_OCRAM_SIZE 0x00040000 /* Real size 256K */ + +/* Generic Interrupt Controller Definitions */ +#define GICD_BASE 0x06000000 +#define GICR_BASE 0x06040000 + +/* SMMU Definitions */ +#define SMMU_BASE 0x05000000 /* GR0 Base */ + +/* DDR */ +#define CONFIG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) +#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_DDR_BLOCK1_SIZE + +#define CONFIG_SYS_FSL_CCSR_GUR_LE +#define CONFIG_SYS_FSL_CCSR_SCFG_LE +#define CONFIG_SYS_FSL_ESDHC_LE +#define CONFIG_SYS_FSL_PEX_LUT_LE + +#define CONFIG_SYS_MEMAC_LITTLE_ENDIAN + +/* SFP */ +#define CONFIG_SYS_FSL_SFP_VER_3_4 +#define CONFIG_SYS_FSL_SFP_LE +#define CONFIG_SYS_FSL_SRK_LE + +/* SEC */ +#define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1 + +/* Security Monitor */ +#define CONFIG_SYS_FSL_SEC_MON_LE + +/* Secure Boot */ +#define CONFIG_ESBC_HDR_LS + +/* DCFG - GUR */ +#define CONFIG_SYS_FSL_CCSR_GUR_LE + #elif defined(CONFIG_FSL_LSCH2) #define CONFIG_SYS_FSL_OCRAM_BASE 0x10000000 /* initial RAM */ #define SYS_FSL_OCRAM_SPACE_SIZE 0x00200000 /* 2M space */ diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index c9aa0cad71..24c1b0e482 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -183,6 +183,9 @@ #define CONFIG_SYS_PCIE1_PHYS_ADDR 0x2000000000ULL #define CONFIG_SYS_PCIE2_PHYS_ADDR 0x2800000000ULL #define CONFIG_SYS_PCIE3_PHYS_ADDR 0x3000000000ULL +#elif CONFIG_ARCH_LS1028A +#define CONFIG_SYS_PCIE1_PHYS_ADDR 0x8000000000ULL +#define CONFIG_SYS_PCIE2_PHYS_ADDR 0x8800000000ULL #else #define CONFIG_SYS_PCIE1_PHYS_ADDR 0x1000000000ULL #define CONFIG_SYS_PCIE2_PHYS_ADDR 0x1200000000ULL @@ -387,6 +390,12 @@ struct ccsr_gur { #define FSL_CHASSIS3_SRDS2_PRTCL_SHIFT FSL_CHASSIS3_RCWSR30_SRDS2_PRTCL_SHIFT #define FSL_CHASSIS3_SRDS1_REGSR 29 #define FSL_CHASSIS3_SRDS2_REGSR 30 +#elif defined(CONFIG_ARCH_LS1028A) +#define FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_MASK 0xFFFF0000 +#define FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_SHIFT 16 +#define FSL_CHASSIS3_SRDS1_PRTCL_MASK FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_MASK +#define FSL_CHASSIS3_SRDS1_PRTCL_SHIFT FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_SHIFT +#define FSL_CHASSIS3_SRDS1_REGSR 29 #endif #define RCW_SB_EN_REG_INDEX 9 #define RCW_SB_EN_MASK 0x00000400 diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h index 7d95c4e2f5..234440b5fe 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h @@ -83,6 +83,7 @@ enum boot_src get_boot_src(void); /* LS1043A/LS1023A 23x23 package silicon has different value of VAR_PER */ #define SVR_LS1043A_P23 0x879202 #define SVR_LS1023A_P23 0x87920A +#define SVR_LS1028A 0x870B00 #define SVR_LS1046A 0x870700 #define SVR_LS1026A 0x870708 #define SVR_LS1048A 0x870320 diff --git a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h index e017d8b558..c53cc57e56 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/stream_id_lsch3.h @@ -87,7 +87,7 @@ #define FSL_PEX_STREAM_ID_NUM (0x100) #endif -#if defined(CONFIG_ARCH_LS2080A) +#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1028A) #define FSL_PEX_STREAM_ID_END 22 #elif defined(CONFIG_ARCH_LS1088A) #define FSL_PEX_STREAM_ID_END 18