From: Scott Wood Date: Sat, 27 Jun 2015 00:03:26 +0000 (-0500) Subject: nand: Sync with Linux v4.1 X-Git-Tag: v2015.10-rc3~93^2~5 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=d3963721d93fafa8da0f78de17602ef308ec15ba;p=oweals%2Fu-boot.git nand: Sync with Linux v4.1 Update the NAND code to match Linux v4.1. The previous sync was from Linux v3.15 in commit 4e67c57125290b25. CONFIG_SYS_NAND_RESET_CNT is removed, as the upstream Linux code now has its own timeout. Plus, CONFIG_SYS_NAND_RESET_CNT was undocumented and not selected by any board. Signed-off-by: Scott Wood --- diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 46dce72bfe..6d239cafa6 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -34,6 +34,7 @@ obj-y += nand_ids.o obj-y += nand_util.o obj-y += nand_ecc.o obj-y += nand_base.o +obj-y += nand_timings.o endif # not spl diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h index b2d2682a88..79e399489e 100644 --- a/drivers/mtd/nand/atmel_nand_ecc.h +++ b/drivers/mtd/nand/atmel_nand_ecc.h @@ -170,4 +170,7 @@ struct pmecc_errloc_regs { #define PMECC_MAX_TIMEOUT_US (100 * 1000) +/* Reserved bytes in oob area */ +#define PMECC_OOB_RESERVED_BYTES 2 + #endif diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 9e0429aa19..192be7dfa1 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -18,8 +18,10 @@ static int onfi_timing_mode = NAND_DEFAULT_TIMINGS; -/* We define a macro here that combines all interrupts this driver uses into - * a single constant value, for convenience. */ +/* + * We define a macro here that combines all interrupts this driver uses into + * a single constant value, for convenience. + */ #define DENALI_IRQ_ALL (INTR_STATUS__DMA_CMD_COMP | \ INTR_STATUS__ECC_TRANSACTION_DONE | \ INTR_STATUS__ECC_ERR | \ @@ -34,8 +36,10 @@ static int onfi_timing_mode = NAND_DEFAULT_TIMINGS; INTR_STATUS__INT_ACT | \ INTR_STATUS__LOCKED_BLK) -/* indicates whether or not the internal value for the flash bank is - * valid or not */ +/* + * indicates whether or not the internal value for the flash bank is + * valid or not + */ #define CHIP_SELECT_INVALID -1 #define SUPPORT_8BITECC 1 @@ -46,11 +50,14 @@ static int onfi_timing_mode = NAND_DEFAULT_TIMINGS; */ #define mtd_to_denali(m) container_of(m->priv, struct denali_nand_info, nand) -/* These constants are defined by the driver to enable common driver - * configuration options. */ +/* + * These constants are defined by the driver to enable common driver + * configuration options. + */ #define SPARE_ACCESS 0x41 #define MAIN_ACCESS 0x42 #define MAIN_SPARE_ACCESS 0x43 +#define PIPELINE_ACCESS 0x2000 #define DENALI_UNLOCK_START 0x10 #define DENALI_UNLOCK_END 0x11 @@ -67,8 +74,10 @@ static int onfi_timing_mode = NAND_DEFAULT_TIMINGS; #define ADDR_CYCLE 1 #define STATUS_CYCLE 2 -/* this is a helper macro that allows us to - * format the bank into the proper bits for the controller */ +/* + * this is a helper macro that allows us to + * format the bank into the proper bits for the controller + */ #define BANK(x) ((x) << 24) /* Interrupts are cleared by writing a 1 to the appropriate status bit */ @@ -140,7 +149,7 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask) * read/write data. The operation is performed by writing the address value * of the command to the device memory followed by the data. This function * abstracts this common operation. -*/ + */ static void index_addr(struct denali_nand_info *denali, uint32_t address, uint32_t data) { @@ -156,8 +165,10 @@ static void index_addr_read_data(struct denali_nand_info *denali, *pdata = readl(denali->flash_mem + INDEX_DATA_REG); } -/* We need to buffer some data for some of the NAND core routines. - * The operations manage buffering that data. */ +/* + * We need to buffer some data for some of the NAND core routines. + * The operations manage buffering that data. + */ static void reset_buf(struct denali_nand_info *denali) { denali->buf.head = 0; @@ -173,8 +184,7 @@ static void write_byte_to_buf(struct denali_nand_info *denali, uint8_t byte) static void reset_bank(struct denali_nand_info *denali) { uint32_t irq_status; - uint32_t irq_mask = INTR_STATUS__RST_COMP | - INTR_STATUS__TIME_OUT; + uint32_t irq_mask = INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT; clear_interrupts(denali); @@ -188,7 +198,7 @@ static void reset_bank(struct denali_nand_info *denali) /* Reset the flash controller */ static uint32_t denali_nand_reset(struct denali_nand_info *denali) { - uint32_t i; + int i; for (i = 0; i < denali->max_banks; i++) writel(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT, @@ -232,7 +242,6 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali, uint32_t twhr[6] = {120, 80, 80, 60, 60, 60}; uint32_t tcs[6] = {70, 35, 25, 25, 20, 15}; - uint32_t tclsrising = 1; uint32_t data_invalid_rhoh, data_invalid_rloh, data_invalid; uint32_t dv_window = 0; uint32_t en_lo, en_hi; @@ -256,9 +265,8 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali, data_invalid_rloh = (en_lo + en_hi) * CLK_X + trloh[mode]; - data_invalid = - data_invalid_rhoh < - data_invalid_rloh ? data_invalid_rhoh : data_invalid_rloh; + data_invalid = data_invalid_rhoh < data_invalid_rloh ? + data_invalid_rhoh : data_invalid_rloh; dv_window = data_invalid - trea[mode]; @@ -268,10 +276,10 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali, acc_clks = DIV_ROUND_UP(trea[mode], CLK_X); - while (((acc_clks * CLK_X) - trea[mode]) < 3) + while (acc_clks * CLK_X - trea[mode] < 3) acc_clks++; - if ((data_invalid - acc_clks * CLK_X) < 2) + if (data_invalid - acc_clks * CLK_X < 2) debug("%s, Line %d: Warning!\n", __FILE__, __LINE__); addr_2_data = DIV_ROUND_UP(tadl[mode], CLK_X); @@ -279,19 +287,17 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali, re_2_re = DIV_ROUND_UP(trhz[mode], CLK_X); we_2_re = DIV_ROUND_UP(twhr[mode], CLK_X); cs_cnt = DIV_ROUND_UP((tcs[mode] - trp[mode]), CLK_X); - if (!tclsrising) - cs_cnt = DIV_ROUND_UP(tcs[mode], CLK_X); if (cs_cnt == 0) cs_cnt = 1; if (tcea[mode]) { - while (((cs_cnt * CLK_X) + trea[mode]) < tcea[mode]) + while (cs_cnt * CLK_X + trea[mode] < tcea[mode]) cs_cnt++; } /* Sighting 3462430: Temporary hack for MT29F128G08CJABAWP:B */ - if ((readl(denali->flash_reg + MANUFACTURER_ID) == 0) && - (readl(denali->flash_reg + DEVICE_ID) == 0x88)) + if (readl(denali->flash_reg + MANUFACTURER_ID) == 0 && + readl(denali->flash_reg + DEVICE_ID) == 0x88) acc_clks = 6; writel(acc_clks, denali->flash_reg + ACC_CLKS); @@ -308,6 +314,7 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali, static uint32_t get_onfi_nand_para(struct denali_nand_info *denali) { int i; + /* * we needn't to do a reset here because driver has already * reset all the banks before @@ -324,8 +331,11 @@ static uint32_t get_onfi_nand_para(struct denali_nand_info *denali) nand_onfi_timing_set(denali, i); - /* By now, all the ONFI devices we know support the page cache */ - /* rw feature. So here we enable the pipeline_rw_ahead feature */ + /* + * By now, all the ONFI devices we know support the page cache + * rw feature. So here we enable the pipeline_rw_ahead feature + */ + return 0; } @@ -348,8 +358,10 @@ static void get_toshiba_nand_para(struct denali_nand_info *denali) { uint32_t tmp; - /* Workaround to fix a controller bug which reports a wrong */ - /* spare area size for some kind of Toshiba NAND device */ + /* + * Workaround to fix a controller bug which reports a wrong + * spare area size for some kind of Toshiba NAND device + */ if ((readl(denali->flash_reg + DEVICE_MAIN_AREA_SIZE) == 4096) && (readl(denali->flash_reg + DEVICE_SPARE_AREA_SIZE) == 64)) { writel(216, denali->flash_reg + DEVICE_SPARE_AREA_SIZE); @@ -379,7 +391,7 @@ static void get_hynix_nand_para(struct denali_nand_info *denali, writel(0, denali->flash_reg + DEVICE_WIDTH); break; default: - debug("Spectra: Unknown Hynix NAND (Device ID: 0x%x)." + debug("Spectra: Unknown Hynix NAND (Device ID: 0x%x).\n" "Will use default parameter values instead.\n", device_id); } @@ -396,11 +408,9 @@ static void find_valid_banks(struct denali_nand_info *denali) denali->total_used_banks = 1; for (i = 0; i < denali->max_banks; i++) { - index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 0), 0x90); - index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 1), 0); - index_addr_read_data(denali, - (uint32_t)(MODE_11 | (i << 24) | 2), - &id[i]); + index_addr(denali, MODE_11 | (i << 24) | 0, 0x90); + index_addr(denali, MODE_11 | (i << 24) | 1, 0); + index_addr_read_data(denali, MODE_11 | (i << 24) | 2, &id[i]); if (i == 0) { if (!(id[i] & 0x0ff)) @@ -453,18 +463,19 @@ static void detect_partition_feature(struct denali_nand_info *denali) static uint32_t denali_nand_timing_set(struct denali_nand_info *denali) { - uint32_t id_bytes[5], addr; - uint8_t i, maf_id, device_id; - - /* Use read id method to get device ID and other - * params. For some NAND chips, controller can't - * report the correct device ID by reading from - * DEVICE_ID register - * */ - addr = (uint32_t)MODE_11 | BANK(denali->flash_bank); - index_addr(denali, (uint32_t)addr | 0, 0x90); - index_addr(denali, (uint32_t)addr | 1, 0); - for (i = 0; i < 5; i++) + uint32_t id_bytes[8], addr; + uint8_t maf_id, device_id; + int i; + + /* + * Use read id method to get device ID and other params. + * For some NAND chips, controller can't report the correct + * device ID by reading from DEVICE_ID register + */ + addr = MODE_11 | BANK(denali->flash_bank); + index_addr(denali, addr | 0, 0x90); + index_addr(denali, addr | 1, 0); + for (i = 0; i < 8; i++) index_addr_read_data(denali, addr | 2, &id_bytes[i]); maf_id = id_bytes[0]; device_id = id_bytes[1]; @@ -485,7 +496,8 @@ static uint32_t denali_nand_timing_set(struct denali_nand_info *denali) detect_partition_feature(denali); - /* If the user specified to override the default timings + /* + * If the user specified to override the default timings * with a specific ONFI mode, we apply those changes here. */ if (onfi_timing_mode != NAND_DEFAULT_TIMINGS) @@ -494,7 +506,8 @@ static uint32_t denali_nand_timing_set(struct denali_nand_info *denali) return 0; } -/* validation function to verify that the controlling software is making +/* + * validation function to verify that the controlling software is making * a valid request */ static inline bool is_flash_bank_valid(int flash_bank) @@ -504,7 +517,7 @@ static inline bool is_flash_bank_valid(int flash_bank) static void denali_irq_init(struct denali_nand_info *denali) { - uint32_t int_mask = 0; + uint32_t int_mask; int i; /* Disable global interrupts */ @@ -519,12 +532,14 @@ static void denali_irq_init(struct denali_nand_info *denali) denali_irq_enable(denali, int_mask); } -/* This helper function setups the registers for ECC and whether or not - * the spare area will be transferred. */ +/* + * This helper function setups the registers for ECC and whether or not + * the spare area will be transferred. + */ static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en, bool transfer_spare) { - int ecc_en_flag = 0, transfer_spare_flag = 0; + int ecc_en_flag, transfer_spare_flag; /* set ECC, transfer spare bits if needed */ ecc_en_flag = ecc_en ? ECC_ENABLE__FLAG : 0; @@ -536,19 +551,19 @@ static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en, writel(transfer_spare_flag, denali->flash_reg + TRANSFER_SPARE_REG); } -/* sends a pipeline command operation to the controller. See the Denali NAND +/* + * sends a pipeline command operation to the controller. See the Denali NAND * controller's user guide for more information (section 4.2.3.6). */ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, - bool ecc_en, bool transfer_spare, - int access_type, int op) + bool ecc_en, bool transfer_spare, + int access_type, int op) { uint32_t addr, cmd, irq_status; static uint32_t page_count = 1; setup_ecc_for_xfer(denali, ecc_en, transfer_spare); - /* clear interrupts */ clear_interrupts(denali); addr = BANK(denali->flash_bank) | denali->page; @@ -576,12 +591,15 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, /* helper function that simply writes a buffer to the flash */ static int write_data_to_flash_mem(struct denali_nand_info *denali, - const uint8_t *buf, int len) + const uint8_t *buf, int len) { - uint32_t i = 0, *buf32; + uint32_t *buf32; + int i; - /* verify that the len is a multiple of 4. see comment in - * read_data_from_flash_mem() */ + /* + * verify that the len is a multiple of 4. + * see comment in read_data_from_flash_mem() + */ BUG_ON((len % 4) != 0); /* write the data to the flash memory */ @@ -593,19 +611,17 @@ static int write_data_to_flash_mem(struct denali_nand_info *denali, /* helper function that simply reads a buffer from the flash */ static int read_data_from_flash_mem(struct denali_nand_info *denali, - uint8_t *buf, int len) + uint8_t *buf, int len) { - uint32_t i, *buf32; + uint32_t *buf32; + int i; /* - * we assume that len will be a multiple of 4, if not - * it would be nice to know about it ASAP rather than - * have random failures... - * This assumption is based on the fact that this - * function is designed to be used to read flash pages, - * which are typically multiples of 4... + * we assume that len will be a multiple of 4, if not it would be nice + * to know about it ASAP rather than have random failures... + * This assumption is based on the fact that this function is designed + * to be used to read flash pages, which are typically multiples of 4. */ - BUG_ON((len % 4) != 0); /* transfer the data from the flash */ @@ -667,8 +683,8 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) { struct denali_nand_info *denali = mtd_to_denali(mtd); - uint32_t irq_mask = INTR_STATUS__LOAD_COMP, - irq_status = 0, addr = 0x0, cmd = 0x0; + uint32_t irq_mask = INTR_STATUS__LOAD_COMP; + uint32_t irq_status, addr, cmd; denali->page = page; @@ -676,15 +692,18 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) DENALI_READ) == 0) { read_data_from_flash_mem(denali, buf, mtd->oobsize); - /* wait for command to be accepted - * can always use status0 bit as the mask is identical for each - * bank. */ + /* + * wait for command to be accepted + * can always use status0 bit as the + * mask is identical for each bank. + */ irq_status = wait_for_irq(denali, irq_mask); if (irq_status == 0) printf("page on OOB timeout %d\n", denali->page); - /* We set the device back to MAIN_ACCESS here as I observed + /* + * We set the device back to MAIN_ACCESS here as I observed * instability with the controller if you do a block erase * and the last transaction was a SPARE_ACCESS. Block erase * is reliable (according to the MTD test infrastructure) @@ -696,12 +715,14 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) } } -/* this function examines buffers to see if they contain data that +/* + * this function examines buffers to see if they contain data that * indicate that the buffer is part of an erased region of flash. */ static bool is_erased(uint8_t *buf, int len) { - int i = 0; + int i; + for (i = 0; i < len; i++) if (buf[i] != 0xFF) return false; @@ -711,12 +732,7 @@ static bool is_erased(uint8_t *buf, int len) /* programs the controller to either enable/disable DMA transfers */ static void denali_enable_dma(struct denali_nand_info *denali, bool en) { - uint32_t reg_val = 0x0; - - if (en) - reg_val = DMA_ENABLE__FLAG; - - writel(reg_val, denali->flash_reg + DMA_ENABLE); + writel(en ? DMA_ENABLE__FLAG : 0, denali->flash_reg + DMA_ENABLE); readl(denali->flash_reg + DMA_ENABLE); } @@ -753,12 +769,12 @@ static void denali_setup_dma(struct denali_nand_info *denali, int op) index_addr(denali, mode | denali->page, 0x2000 | op | page_count); /* 2. set memory high address bits 23:8 */ - index_addr(denali, mode | ((uint32_t)(addr >> 16) << 8), 0x2200); + index_addr(denali, mode | ((addr >> 16) << 8), 0x2200); /* 3. set memory low address bits 23:8 */ - index_addr(denali, mode | ((uint32_t)addr << 8), 0x2300); + index_addr(denali, mode | ((addr & 0xffff) << 8), 0x2300); - /* 4. interrupt when complete, burst len = 64 bytes*/ + /* 4. interrupt when complete, burst len = 64 bytes */ index_addr(denali, mode | 0x14000, 0x2400); #endif } @@ -1018,17 +1034,18 @@ static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip) { struct denali_nand_info *denali = mtd_to_denali(mtd); int status = denali->status; + denali->status = 0; return status; } -static void denali_erase(struct mtd_info *mtd, int page) +static int denali_erase(struct mtd_info *mtd, int page) { struct denali_nand_info *denali = mtd_to_denali(mtd); + uint32_t cmd, irq_status; - /* clear interrupts */ clear_interrupts(denali); /* setup page read request for access type */ @@ -1041,9 +1058,9 @@ static void denali_erase(struct mtd_info *mtd, int page) if (irq_status & INTR_STATUS__ERASE_FAIL || irq_status & INTR_STATUS__LOCKED_BLK) - denali->status = NAND_STATUS_FAIL; - else - denali->status = 0; + return NAND_STATUS_FAIL; + + return 0; } static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col, @@ -1062,10 +1079,11 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col, case NAND_CMD_READID: case NAND_CMD_PARAM: reset_buf(denali); - /* sometimes ManufactureId read from register is not right + /* + * sometimes ManufactureId read from register is not right * e.g. some of Micron MT29F32G08QAA MLC NAND chips * So here we send READID cmd to NAND insteand - * */ + */ addr = MODE_11 | BANK(denali->flash_bank); index_addr(denali, addr | 0, cmd); index_addr(denali, addr | 1, col & 0xFF); @@ -1187,6 +1205,9 @@ static int denali_init(struct denali_nand_info *denali) denali->nand.ecc.mode = NAND_ECC_HW; denali->nand.ecc.size = CONFIG_NAND_DENALI_ECC_SIZE; + /* no subpage writes on denali */ + denali->nand.options |= NAND_NO_SUBPAGE_WRITE; + /* * Tell driver the ecc strength. This register may be already set * correctly. So we read this value out. diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h index a258df00fd..93b57259d6 100644 --- a/drivers/mtd/nand/denali.h +++ b/drivers/mtd/nand/denali.h @@ -5,6 +5,9 @@ * SPDX-License-Identifier: GPL-2.0+ */ +#ifndef __DENALI_H__ +#define __DENALI_H__ + #include #define DEVICE_RESET 0x0 @@ -381,9 +384,6 @@ #define CUSTOM_CONF_PARAMS 0 -#ifndef _LLD_NAND_ -#define _LLD_NAND_ - #define INDEX_CTRL_REG 0x0 #define INDEX_DATA_REG 0x10 @@ -463,4 +463,4 @@ struct denali_nand_info { uint32_t max_banks; }; -#endif /*_LLD_NAND_*/ +#endif /* __DENALI_H__ */ diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c index b9121c397e..c1c1ff876a 100644 --- a/drivers/mtd/nand/docg4.c +++ b/drivers/mtd/nand/docg4.c @@ -717,7 +717,7 @@ static int docg4_read_page(struct mtd_info *mtd, struct nand_chip *nand, return read_page(mtd, nand, buf, page, 1); } -static void docg4_erase_block(struct mtd_info *mtd, int page) +static int docg4_erase_block(struct mtd_info *mtd, int page) { struct nand_chip *nand = mtd->priv; struct docg4_priv *doc = nand->priv; @@ -760,6 +760,8 @@ static void docg4_erase_block(struct mtd_info *mtd, int page) write_nop(docptr); poll_status(docptr); write_nop(docptr); + + return nand->waitfunc(mtd, nand); } static int read_factory_bbt(struct mtd_info *mtd) @@ -972,7 +974,7 @@ int docg4_nand_init(struct mtd_info *mtd, struct nand_chip *nand, int devnum) nand->read_buf = docg4_read_buf; nand->write_buf = docg4_write_buf16; nand->scan_bbt = nand_default_bbt; - nand->erase_cmd = docg4_erase_block; + nand->erase = docg4_erase_block; nand->ecc.read_page = docg4_read_page; nand->ecc.write_page = docg4_write_page; nand->ecc.read_page_raw = docg4_read_page_raw; diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index b3a0edbf14..d457d53574 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -621,6 +621,19 @@ static int fsl_elbc_write_page(struct mtd_info *mtd, struct nand_chip *chip, static struct fsl_elbc_ctrl *elbc_ctrl; +/* ECC will be calculated automatically, and errors will be detected in + * waitfunc. + */ +static int fsl_elbc_write_subpage(struct mtd_info *mtd, struct nand_chip *chip, + uint32_t offset, uint32_t data_len, + const uint8_t *buf, int oob_required) +{ + fsl_elbc_write_buf(mtd, buf, mtd->writesize); + fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize); + + return 0; +} + static void fsl_elbc_ctrl_init(void) { elbc_ctrl = kzalloc(sizeof(*elbc_ctrl), GFP_KERNEL); @@ -710,6 +723,7 @@ static int fsl_elbc_chip_init(int devnum, u8 *addr) nand->ecc.read_page = fsl_elbc_read_page; nand->ecc.write_page = fsl_elbc_write_page; + nand->ecc.write_subpage = fsl_elbc_write_subpage; priv->fmr = (15 << FMR_CWTO_SHIFT) | (2 << FMR_AL_SHIFT); diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index 79fa88b22f..975b0d4613 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -47,7 +47,7 @@ struct fsl_ifc_ctrl { /* device info */ struct fsl_ifc regs; - uint8_t __iomem *addr; /* Address of assigned IFC buffer */ + void __iomem *addr; /* Address of assigned IFC buffer */ unsigned int cs_nand; /* On which chipsel NAND is connected */ unsigned int page; /* Last page written to / read from */ unsigned int read_bytes; /* Number of bytes read during command */ @@ -577,8 +577,15 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, fsl_ifc_run_command(mtd); - /* Chip sometimes reporting write protect even when it's not */ - out_8(ctrl->addr, in_8(ctrl->addr) | NAND_STATUS_WP); + /* + * The chip always seems to report that it is + * write-protected, even when it is not. + */ + if (chip->options & NAND_BUSWIDTH_16) + ifc_out16(ctrl->addr, + ifc_in16(ctrl->addr) | NAND_STATUS_WP); + else + out_8(ctrl->addr, in_8(ctrl->addr) | NAND_STATUS_WP); return; case NAND_CMD_RESET: @@ -618,7 +625,7 @@ static void fsl_ifc_write_buf(struct mtd_info *mtd, const u8 *buf, int len) len = bufsize - ctrl->index; } - memcpy_toio(&ctrl->addr[ctrl->index], buf, len); + memcpy_toio(ctrl->addr + ctrl->index, buf, len); ctrl->index += len; } @@ -631,11 +638,16 @@ static u8 fsl_ifc_read_byte(struct mtd_info *mtd) struct nand_chip *chip = mtd->priv; struct fsl_ifc_mtd *priv = chip->priv; struct fsl_ifc_ctrl *ctrl = priv->ctrl; + unsigned int offset; - /* If there are still bytes in the IFC buffer, then use the - * next byte. */ - if (ctrl->index < ctrl->read_bytes) - return in_8(&ctrl->addr[ctrl->index++]); + /* + * If there are still bytes in the IFC buffer, then use the + * next byte. + */ + if (ctrl->index < ctrl->read_bytes) { + offset = ctrl->index++; + return in_8(ctrl->addr + offset); + } printf("%s beyond end of buffer\n", __func__); return ERR_BYTE; @@ -657,8 +669,7 @@ static uint8_t fsl_ifc_read_byte16(struct mtd_info *mtd) * next byte. */ if (ctrl->index < ctrl->read_bytes) { - data = ifc_in16((uint16_t *)&ctrl-> - addr[ctrl->index]); + data = ifc_in16(ctrl->addr + ctrl->index); ctrl->index += 2; return (uint8_t)data; } @@ -681,7 +692,7 @@ static void fsl_ifc_read_buf(struct mtd_info *mtd, u8 *buf, int len) return; avail = min((unsigned int)len, ctrl->read_bytes - ctrl->index); - memcpy_fromio(buf, &ctrl->addr[ctrl->index], avail); + memcpy_fromio(buf, ctrl->addr + ctrl->index, avail); ctrl->index += avail; if (len > avail) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index bf4caa81eb..9e8fc1ffe2 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -45,17 +45,6 @@ #include #include -/* - * CONFIG_SYS_NAND_RESET_CNT is used as a timeout mechanism when resetting - * a flash. NAND flash is initialized prior to interrupts so standard timers - * can't be used. CONFIG_SYS_NAND_RESET_CNT should be set to a value - * which is greater than (max NAND reset time / NAND status read time). - * A conservative default of 200000 (500 us / 25 ns) is used as a default. - */ -#ifndef CONFIG_SYS_NAND_RESET_CNT -#define CONFIG_SYS_NAND_RESET_CNT 200000 -#endif - static bool is_module_text_address(unsigned long addr) {return 0;} /* Define default oob placement schemes for large and small page devices */ @@ -161,7 +150,6 @@ uint8_t nand_read_byte(struct mtd_info *mtd) } /** - * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip * @mtd: MTD device structure * @@ -427,7 +415,7 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) uint8_t buf[2] = { 0, 0 }; int ret = 0, res, i = 0; - ops.datbuf = NULL; + memset(&ops, 0, sizeof(ops)); ops.oobbuf = buf; ops.ooboffs = chip->badblockpos; if (chip->options & NAND_BUSWIDTH_16) { @@ -525,11 +513,11 @@ static int nand_check_wp(struct mtd_info *mtd) } /** - * nand_block_checkbad - [GENERIC] Check if a block is marked bad + * nand_block_isreserved - [GENERIC] Check if a block is marked reserved. * @mtd: MTD device structure * @ofs: offset from device start * - * Check if the block is mark as reserved. + * Check if the block is marked as reserved. */ static int nand_block_isreserved(struct mtd_info *mtd, loff_t ofs) { @@ -586,6 +574,27 @@ void nand_wait_ready(struct mtd_info *mtd) } EXPORT_SYMBOL_GPL(nand_wait_ready); +/** + * nand_wait_status_ready - [GENERIC] Wait for the ready status after commands. + * @mtd: MTD device structure + * @timeo: Timeout in ms + * + * Wait for status ready (i.e. command done) or timeout. + */ +static void nand_wait_status_ready(struct mtd_info *mtd, unsigned long timeo) +{ + register struct nand_chip *chip = mtd->priv; + u32 time_start; + + timeo = (CONFIG_SYS_HZ * timeo) / 1000; + time_start = get_timer(0); + while (get_timer(time_start) < timeo) { + if ((chip->read_byte(mtd) & NAND_STATUS_READY)) + break; + WATCHDOG_RESET(); + } +}; + /** * nand_command - [DEFAULT] Send command to NAND device * @mtd: MTD device structure @@ -601,7 +610,6 @@ static void nand_command(struct mtd_info *mtd, unsigned int command, { register struct nand_chip *chip = mtd->priv; int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE; - uint32_t rst_sts_cnt = CONFIG_SYS_NAND_RESET_CNT; /* Write out the command to the device */ if (command == NAND_CMD_SEQIN) { @@ -665,8 +673,8 @@ static void nand_command(struct mtd_info *mtd, unsigned int command, NAND_CTRL_CLE | NAND_CTRL_CHANGE); chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); - while (!(chip->read_byte(mtd) & NAND_STATUS_READY) && - (rst_sts_cnt--)); + /* EZ-NAND can take upto 250ms as per ONFi v4.0 */ + nand_wait_status_ready(mtd, 250); return; /* This applies to read commands */ @@ -704,7 +712,6 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command, int column, int page_addr) { register struct nand_chip *chip = mtd->priv; - uint32_t rst_sts_cnt = CONFIG_SYS_NAND_RESET_CNT; /* Emulate NAND_CMD_READOOB */ if (command == NAND_CMD_READOOB) { @@ -742,7 +749,7 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command, /* * Program and erase have their own busy handlers status, sequential - * in, and deplete1 need no delay. + * in and status need no delay. */ switch (command) { @@ -763,8 +770,8 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command, NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); - while (!(chip->read_byte(mtd) & NAND_STATUS_READY) && - (rst_sts_cnt--)); + /* EZ-NAND can take upto 250ms as per ONFi v4.0 */ + nand_wait_status_ready(mtd, 250); return; case NAND_CMD_RNDOUT: @@ -1062,8 +1069,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, * ecc.pos. Let's make sure that there are no gaps in ECC positions. */ for (i = 0; i < eccfrag_len - 1; i++) { - if (eccpos[i + start_step * chip->ecc.bytes] + 1 != - eccpos[i + start_step * chip->ecc.bytes + 1]) { + if (eccpos[i + index] + 1 != eccpos[i + index + 1]) { gaps = 1; break; } @@ -1359,6 +1365,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, mtd->oobavail : mtd->oobsize; uint8_t *bufpoi, *oob, *buf; + int use_bufpoi; unsigned int max_bitflips = 0; int retry_mode = 0; bool ecc_fail = false; @@ -1382,9 +1389,18 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, bytes = min(mtd->writesize - col, readlen); aligned = (bytes == mtd->writesize); + if (!aligned) + use_bufpoi = 1; + else + use_bufpoi = 0; + /* Is the current page in the buffer? */ if (realpage != chip->pagebuf || oob) { - bufpoi = aligned ? buf : chip->buffers->databuf; + bufpoi = use_bufpoi ? chip->buffers->databuf : buf; + + if (use_bufpoi && aligned) + pr_debug("%s: using read bounce buffer for buf@%p\n", + __func__, buf); read_retry: chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page); @@ -1406,7 +1422,7 @@ read_retry: ret = chip->ecc.read_page(mtd, chip, bufpoi, oob_required, page); if (ret < 0) { - if (!aligned) + if (use_bufpoi) /* Invalidate page cache */ chip->pagebuf = -1; break; @@ -1415,7 +1431,7 @@ read_retry: max_bitflips = max_t(unsigned int, max_bitflips, ret); /* Transfer not aligned data */ - if (!aligned) { + if (use_bufpoi) { if (!NAND_HAS_SUBPAGE_READ(chip) && !oob && !(mtd->ecc_stats.failed - ecc_failures) && (ops->mode != MTD_OPS_RAW)) { @@ -1529,9 +1545,9 @@ static int nand_read(struct mtd_info *mtd, loff_t from, size_t len, int ret; nand_get_device(mtd, FL_READING); + memset(&ops, 0, sizeof(ops)); ops.len = len; ops.datbuf = buf; - ops.oobbuf = NULL; ops.mode = MTD_OPS_PLACE_OOB; ret = nand_do_read_ops(mtd, from, &ops); *retlen = ops.retlen; @@ -1563,11 +1579,10 @@ static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip, static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip, int page) { - uint8_t *buf = chip->oob_poi; int length = mtd->oobsize; int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad; int eccsize = chip->ecc.size; - uint8_t *bufpoi = buf; + uint8_t *bufpoi = chip->oob_poi; int i, toread, sndrnd = 0, pos; chip->cmdfunc(mtd, NAND_CMD_READ0, chip->ecc.size, page); @@ -1940,7 +1955,7 @@ static int nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, /** - * nand_write_subpage_hwecc - [REPLACABLE] hardware ECC based subpage write + * nand_write_subpage_hwecc - [REPLACEABLE] hardware ECC based subpage write * @mtd: mtd info structure * @chip: nand chip info structure * @offset: column address of subpage within the page @@ -2223,8 +2238,8 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to, blockmask = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1; /* Invalidate the page cache, when we write to the cached page */ - if (to <= (chip->pagebuf << chip->page_shift) && - (chip->pagebuf << chip->page_shift) < (to + ops->len)) + if (to <= ((loff_t)chip->pagebuf << chip->page_shift) && + ((loff_t)chip->pagebuf << chip->page_shift) < (to + ops->len)) chip->pagebuf = -1; /* Don't allow multipage oob writes with offset */ @@ -2237,12 +2252,22 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to, int bytes = mtd->writesize; int cached = writelen > bytes && page != blockmask; uint8_t *wbuf = buf; + int use_bufpoi; + int part_pagewr = (column || writelen < (mtd->writesize - 1)); + + if (part_pagewr) + use_bufpoi = 1; + else + use_bufpoi = 0; WATCHDOG_RESET(); - /* Partial page write? */ - if (unlikely(column || writelen < (mtd->writesize - 1))) { + /* Partial page write?, or need to use bounce buffer */ + if (use_bufpoi) { + pr_debug("%s: using write bounce buffer for buf@%p\n", + __func__, buf); cached = 0; - bytes = min_t(int, bytes - column, (int) writelen); + if (part_pagewr) + bytes = min_t(int, bytes - column, writelen); chip->pagebuf = -1; memset(chip->buffers->databuf, 0xff, mtd->writesize); memcpy(&chip->buffers->databuf[column], buf, bytes); @@ -2313,9 +2338,9 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len, /* Grab the device */ panic_nand_get_device(chip, mtd, FL_WRITING); + memset(&ops, 0, sizeof(ops)); ops.len = len; ops.datbuf = (uint8_t *)buf; - ops.oobbuf = NULL; ops.mode = MTD_OPS_PLACE_OOB; ret = nand_do_write_ops(mtd, to, &ops); @@ -2341,9 +2366,9 @@ static int nand_write(struct mtd_info *mtd, loff_t to, size_t len, int ret; nand_get_device(mtd, FL_WRITING); + memset(&ops, 0, sizeof(ops)); ops.len = len; ops.datbuf = (uint8_t *)buf; - ops.oobbuf = NULL; ops.mode = MTD_OPS_PLACE_OOB; ret = nand_do_write_ops(mtd, to, &ops); *retlen = ops.retlen; @@ -2480,18 +2505,20 @@ out: } /** - * single_erase_cmd - [GENERIC] NAND standard block erase command function + * single_erase - [GENERIC] NAND standard block erase command function * @mtd: MTD device structure * @page: the page address of the block which will be erased * - * Standard erase command for NAND chips. + * Standard erase command for NAND chips. Returns NAND status. */ -static void single_erase_cmd(struct mtd_info *mtd, int page) +static int single_erase(struct mtd_info *mtd, int page) { struct nand_chip *chip = mtd->priv; /* Send commands to erase a block */ chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page); chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1); + + return chip->waitfunc(mtd, chip); } /** @@ -2574,9 +2601,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, (page + pages_per_block)) chip->pagebuf = -1; - chip->erase_cmd(mtd, page & chip->pagemask); - - status = chip->waitfunc(mtd, chip); + status = chip->erase(mtd, page & chip->pagemask); /* * See if operation failed and additional status checks are @@ -2729,7 +2754,6 @@ static int nand_onfi_get_features(struct mtd_info *mtd, struct nand_chip *chip, return 0; } - /* Set default functions */ static void nand_set_defaults(struct nand_chip *chip, int busw) { @@ -3388,6 +3412,8 @@ static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip, chip->options |= type->options; chip->ecc_strength_ds = NAND_ECC_STRENGTH(type); chip->ecc_step_ds = NAND_ECC_STEP(type); + chip->onfi_timing_mode_default = + type->onfi_timing_mode_default; *busw = type->options & NAND_BUSWIDTH_16; @@ -3460,7 +3486,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, chip->onfi_version = 0; if (!type->name || !type->pagesize) { - /* Check is chip is ONFI compliant */ + /* Check if the chip is ONFI compliant */ if (nand_flash_detect_onfi(mtd, chip, &busw)) goto ident_done; @@ -3538,7 +3564,7 @@ ident_done: } chip->badblockbits = 8; - chip->erase_cmd = single_erase_cmd; + chip->erase = single_erase; /* Do not replace user supplied command function! */ if (mtd->writesize > 512 && chip->cmdfunc == nand_command) @@ -3569,9 +3595,9 @@ ident_done: type->name); #endif - pr_info("%dMiB, %s, page size: %d, OOB size: %d\n", + pr_info("%d MiB, %s, erase size: %d KiB, page size: %d, OOB size: %d\n", (int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC", - mtd->writesize, mtd->oobsize); + mtd->erasesize >> 10, mtd->writesize, mtd->oobsize); return type; } @@ -3638,6 +3664,39 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips, } EXPORT_SYMBOL(nand_scan_ident); +/* + * Check if the chip configuration meet the datasheet requirements. + + * If our configuration corrects A bits per B bytes and the minimum + * required correction level is X bits per Y bytes, then we must ensure + * both of the following are true: + * + * (1) A / B >= X / Y + * (2) A >= X + * + * Requirement (1) ensures we can correct for the required bitflip density. + * Requirement (2) ensures we can correct even when all bitflips are clumped + * in the same sector. + */ +static bool nand_ecc_strength_good(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd->priv; + struct nand_ecc_ctrl *ecc = &chip->ecc; + int corr, ds_corr; + + if (ecc->size == 0 || chip->ecc_step_ds == 0) + /* Not enough information */ + return true; + + /* + * We get the number of corrected bits per page to compare + * the correction density. + */ + corr = (mtd->writesize * ecc->strength) / ecc->size; + ds_corr = (mtd->writesize * chip->ecc_strength_ds) / chip->ecc_step_ds; + + return corr >= ds_corr && ecc->strength >= chip->ecc_strength_ds; +} /** * nand_scan_tail - [NAND Interface] Scan for the NAND device @@ -3705,8 +3764,7 @@ int nand_scan_tail(struct mtd_info *mtd) case NAND_ECC_HW_OOB_FIRST: /* Similar to NAND_ECC_HW, but a separate read_page handle */ if (!ecc->calculate || !ecc->correct || !ecc->hwctl) { - pr_warn("No ECC functions supplied; " - "hardware ECC not possible\n"); + pr_warn("No ECC functions supplied; hardware ECC not possible\n"); BUG(); } if (!ecc->read_page) @@ -3737,8 +3795,7 @@ int nand_scan_tail(struct mtd_info *mtd) ecc->read_page == nand_read_page_hwecc || !ecc->write_page || ecc->write_page == nand_write_page_hwecc)) { - pr_warn("No ECC functions supplied; " - "hardware ECC not possible\n"); + pr_warn("No ECC functions supplied; hardware ECC not possible\n"); BUG(); } /* Use standard syndrome read/write page function? */ @@ -3762,9 +3819,8 @@ int nand_scan_tail(struct mtd_info *mtd) } break; } - pr_warn("%d byte HW ECC not possible on " - "%d byte page size, fallback to SW ECC\n", - ecc->size, mtd->writesize); + pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n", + ecc->size, mtd->writesize); ecc->mode = NAND_ECC_SOFT; case NAND_ECC_SOFT: @@ -3798,27 +3854,28 @@ int nand_scan_tail(struct mtd_info *mtd) ecc->read_oob = nand_read_oob_std; ecc->write_oob = nand_write_oob_std; /* - * Board driver should supply ecc.size and ecc.bytes values to - * select how many bits are correctable; see nand_bch_init() - * for details. Otherwise, default to 4 bits for large page - * devices. + * Board driver should supply ecc.size and ecc.strength values + * to select how many bits are correctable. Otherwise, default + * to 4 bits for large page devices. */ if (!ecc->size && (mtd->oobsize >= 64)) { ecc->size = 512; - ecc->bytes = 7; + ecc->strength = 4; } + + /* See nand_bch_init() for details. */ + ecc->bytes = DIV_ROUND_UP( + ecc->strength * fls(8 * ecc->size), 8); ecc->priv = nand_bch_init(mtd, ecc->size, ecc->bytes, &ecc->layout); if (!ecc->priv) { pr_warn("BCH ECC initialization failed!\n"); BUG(); } - ecc->strength = ecc->bytes * 8 / fls(8 * ecc->size); break; case NAND_ECC_NONE: - pr_warn("NAND_ECC_NONE selected by board driver. " - "This is not recommended!\n"); + pr_warn("NAND_ECC_NONE selected by board driver. This is not recommended!\n"); ecc->read_page = nand_read_page_raw; ecc->write_page = nand_write_page_raw; ecc->read_oob = nand_read_oob_std; @@ -3851,6 +3908,11 @@ int nand_scan_tail(struct mtd_info *mtd) ecc->layout->oobavail += ecc->layout->oobfree[i].length; mtd->oobavail = ecc->layout->oobavail; + /* ECC sanity check: warn if it's too weak */ + if (!nand_ecc_strength_good(mtd)) + pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n", + mtd->name); + /* * Set the number of read / write steps for one page depending on ECC * mode. @@ -3884,8 +3946,16 @@ int nand_scan_tail(struct mtd_info *mtd) chip->pagebuf = -1; /* Large page NAND with SOFT_ECC should support subpage reads */ - if ((ecc->mode == NAND_ECC_SOFT) && (chip->page_shift > 9)) - chip->options |= NAND_SUBPAGE_READ; + switch (ecc->mode) { + case NAND_ECC_SOFT: + case NAND_ECC_SOFT_BCH: + if (chip->page_shift > 9) + chip->options |= NAND_SUBPAGE_READ; + break; + + default: + break; + } /* Fill in remaining MTD driver data */ mtd->type = nand_is_slc(chip) ? MTD_NANDFLASH : MTD_MLCNANDFLASH; @@ -3915,7 +3985,7 @@ int nand_scan_tail(struct mtd_info *mtd) * properly set. */ if (!mtd->bitflip_threshold) - mtd->bitflip_threshold = mtd->ecc_strength; + mtd->bitflip_threshold = DIV_ROUND_UP(mtd->ecc_strength * 3, 4); return 0; } diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index 34b8ddcbcb..00f28a4157 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -199,12 +199,12 @@ static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num, res = mtd_read(mtd, from, len, &retlen, buf); if (res < 0) { if (mtd_is_eccerr(res)) { - pr_info("nand_bbt: ECC error in BBT at " - "0x%012llx\n", from & ~mtd->writesize); + pr_info("nand_bbt: ECC error in BBT at 0x%012llx\n", + from & ~mtd->writesize); return res; } else if (mtd_is_bitflip(res)) { - pr_info("nand_bbt: corrected error in BBT at " - "0x%012llx\n", from & ~mtd->writesize); + pr_info("nand_bbt: corrected error in BBT at 0x%012llx\n", + from & ~mtd->writesize); ret = res; } else { pr_info("nand_bbt: error reading BBT\n"); @@ -578,8 +578,8 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr if (td->pages[i] == -1) pr_warn("Bad block table not found for chip %d\n", i); else - pr_info("Bad block table found at page %d, version " - "0x%02X\n", td->pages[i], td->version[i]); + pr_info("Bad block table found at page %d, version 0x%02X\n", + td->pages[i], td->version[i]); } return 0; } @@ -723,12 +723,10 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf, res = mtd_read(mtd, to, len, &retlen, buf); if (res < 0) { if (retlen != len) { - pr_info("nand_bbt: error reading block " - "for writing the bad block table\n"); + pr_info("nand_bbt: error reading block for writing the bad block table\n"); return res; } - pr_warn("nand_bbt: ECC error while reading " - "block for writing bad block table\n"); + pr_warn("nand_bbt: ECC error while reading block for writing bad block table\n"); } /* Read oob data */ ops.ooblen = (len >> this->page_shift) * mtd->oobsize; @@ -1280,6 +1278,7 @@ static int nand_create_badblock_pattern(struct nand_chip *this) int nand_default_bbt(struct mtd_info *mtd) { struct nand_chip *this = mtd->priv; + int ret; /* Is a flash based bad block table requested? */ if (this->bbt_options & NAND_BBT_USE_FLASH) { @@ -1298,8 +1297,11 @@ int nand_default_bbt(struct mtd_info *mtd) this->bbt_md = NULL; } - if (!this->badblock_pattern) - nand_create_badblock_pattern(this); + if (!this->badblock_pattern) { + ret = nand_create_badblock_pattern(this); + if (ret) + return ret; + } return nand_scan_bbt(mtd, this->badblock_pattern); } @@ -1332,9 +1334,8 @@ int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt) block = (int)(offs >> this->bbt_erase_shift); res = bbt_get_entry(this, block); - pr_debug("nand_isbad_bbt(): bbt info for offs 0x%08x: " - "(block %d) 0x%02x\n", - (unsigned int)offs, block, res); + pr_debug("nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n", + (unsigned int)offs, block, res); switch (res) { case BBT_BLOCK_GOOD: diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c index 5b3792feec..fdd00741dc 100644 --- a/drivers/mtd/nand/nand_ids.c +++ b/drivers/mtd/nand/nand_ids.c @@ -56,6 +56,10 @@ struct nand_flash_dev nand_flash_ids[] = { {"SDTNRGAMA 64G 3.3V 8-bit", { .id = {0x45, 0xde, 0x94, 0x93, 0x76, 0x50} }, SZ_16K, SZ_8K, SZ_4M, 0, 6, 1280, NAND_ECC_INFO(40, SZ_1K) }, + {"H27UCG8T2ATR-BC 64G 3.3V 8-bit", + { .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} }, + SZ_8K, SZ_8K, SZ_2M, 0, 6, 640, NAND_ECC_INFO(40, SZ_1K), + 4 }, LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS), LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS), @@ -184,6 +188,7 @@ struct nand_manufacturers nand_manuf_ids[] = { {NAND_MFR_EON, "Eon"}, {NAND_MFR_SANDISK, "SanDisk"}, {NAND_MFR_INTEL, "Intel"}, + {NAND_MFR_ATO, "ATO"}, {0x0, "Unknown"} }; diff --git a/drivers/mtd/nand/nand_timings.c b/drivers/mtd/nand/nand_timings.c new file mode 100644 index 0000000000..53dcbd323d --- /dev/null +++ b/drivers/mtd/nand/nand_timings.c @@ -0,0 +1,252 @@ +/* + * Copyright (C) 2014 Free Electrons + * + * Author: Boris BREZILLON + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include +#include +#include + +static const struct nand_sdr_timings onfi_sdr_timings[] = { + /* Mode 0 */ + { + .tADL_min = 200000, + .tALH_min = 20000, + .tALS_min = 50000, + .tAR_min = 25000, + .tCEA_max = 100000, + .tCEH_min = 20000, + .tCH_min = 20000, + .tCHZ_max = 100000, + .tCLH_min = 20000, + .tCLR_min = 20000, + .tCLS_min = 50000, + .tCOH_min = 0, + .tCS_min = 70000, + .tDH_min = 20000, + .tDS_min = 40000, + .tFEAT_max = 1000000, + .tIR_min = 10000, + .tITC_max = 1000000, + .tRC_min = 100000, + .tREA_max = 40000, + .tREH_min = 30000, + .tRHOH_min = 0, + .tRHW_min = 200000, + .tRHZ_max = 200000, + .tRLOH_min = 0, + .tRP_min = 50000, + .tRST_max = 250000000000ULL, + .tWB_max = 200000, + .tRR_min = 40000, + .tWC_min = 100000, + .tWH_min = 30000, + .tWHR_min = 120000, + .tWP_min = 50000, + .tWW_min = 100000, + }, + /* Mode 1 */ + { + .tADL_min = 100000, + .tALH_min = 10000, + .tALS_min = 25000, + .tAR_min = 10000, + .tCEA_max = 45000, + .tCEH_min = 20000, + .tCH_min = 10000, + .tCHZ_max = 50000, + .tCLH_min = 10000, + .tCLR_min = 10000, + .tCLS_min = 25000, + .tCOH_min = 15000, + .tCS_min = 35000, + .tDH_min = 10000, + .tDS_min = 20000, + .tFEAT_max = 1000000, + .tIR_min = 0, + .tITC_max = 1000000, + .tRC_min = 50000, + .tREA_max = 30000, + .tREH_min = 15000, + .tRHOH_min = 15000, + .tRHW_min = 100000, + .tRHZ_max = 100000, + .tRLOH_min = 0, + .tRP_min = 25000, + .tRR_min = 20000, + .tRST_max = 500000000, + .tWB_max = 100000, + .tWC_min = 45000, + .tWH_min = 15000, + .tWHR_min = 80000, + .tWP_min = 25000, + .tWW_min = 100000, + }, + /* Mode 2 */ + { + .tADL_min = 100000, + .tALH_min = 10000, + .tALS_min = 15000, + .tAR_min = 10000, + .tCEA_max = 30000, + .tCEH_min = 20000, + .tCH_min = 10000, + .tCHZ_max = 50000, + .tCLH_min = 10000, + .tCLR_min = 10000, + .tCLS_min = 15000, + .tCOH_min = 15000, + .tCS_min = 25000, + .tDH_min = 5000, + .tDS_min = 15000, + .tFEAT_max = 1000000, + .tIR_min = 0, + .tITC_max = 1000000, + .tRC_min = 35000, + .tREA_max = 25000, + .tREH_min = 15000, + .tRHOH_min = 15000, + .tRHW_min = 100000, + .tRHZ_max = 100000, + .tRLOH_min = 0, + .tRR_min = 20000, + .tRST_max = 500000000, + .tWB_max = 100000, + .tRP_min = 17000, + .tWC_min = 35000, + .tWH_min = 15000, + .tWHR_min = 80000, + .tWP_min = 17000, + .tWW_min = 100000, + }, + /* Mode 3 */ + { + .tADL_min = 100000, + .tALH_min = 5000, + .tALS_min = 10000, + .tAR_min = 10000, + .tCEA_max = 25000, + .tCEH_min = 20000, + .tCH_min = 5000, + .tCHZ_max = 50000, + .tCLH_min = 5000, + .tCLR_min = 10000, + .tCLS_min = 10000, + .tCOH_min = 15000, + .tCS_min = 25000, + .tDH_min = 5000, + .tDS_min = 10000, + .tFEAT_max = 1000000, + .tIR_min = 0, + .tITC_max = 1000000, + .tRC_min = 30000, + .tREA_max = 20000, + .tREH_min = 10000, + .tRHOH_min = 15000, + .tRHW_min = 100000, + .tRHZ_max = 100000, + .tRLOH_min = 0, + .tRP_min = 15000, + .tRR_min = 20000, + .tRST_max = 500000000, + .tWB_max = 100000, + .tWC_min = 30000, + .tWH_min = 10000, + .tWHR_min = 80000, + .tWP_min = 15000, + .tWW_min = 100000, + }, + /* Mode 4 */ + { + .tADL_min = 70000, + .tALH_min = 5000, + .tALS_min = 10000, + .tAR_min = 10000, + .tCEA_max = 25000, + .tCEH_min = 20000, + .tCH_min = 5000, + .tCHZ_max = 30000, + .tCLH_min = 5000, + .tCLR_min = 10000, + .tCLS_min = 10000, + .tCOH_min = 15000, + .tCS_min = 20000, + .tDH_min = 5000, + .tDS_min = 10000, + .tFEAT_max = 1000000, + .tIR_min = 0, + .tITC_max = 1000000, + .tRC_min = 25000, + .tREA_max = 20000, + .tREH_min = 10000, + .tRHOH_min = 15000, + .tRHW_min = 100000, + .tRHZ_max = 100000, + .tRLOH_min = 5000, + .tRP_min = 12000, + .tRR_min = 20000, + .tRST_max = 500000000, + .tWB_max = 100000, + .tWC_min = 25000, + .tWH_min = 10000, + .tWHR_min = 80000, + .tWP_min = 12000, + .tWW_min = 100000, + }, + /* Mode 5 */ + { + .tADL_min = 70000, + .tALH_min = 5000, + .tALS_min = 10000, + .tAR_min = 10000, + .tCEA_max = 25000, + .tCEH_min = 20000, + .tCH_min = 5000, + .tCHZ_max = 30000, + .tCLH_min = 5000, + .tCLR_min = 10000, + .tCLS_min = 10000, + .tCOH_min = 15000, + .tCS_min = 15000, + .tDH_min = 5000, + .tDS_min = 7000, + .tFEAT_max = 1000000, + .tIR_min = 0, + .tITC_max = 1000000, + .tRC_min = 20000, + .tREA_max = 16000, + .tREH_min = 7000, + .tRHOH_min = 15000, + .tRHW_min = 100000, + .tRHZ_max = 100000, + .tRLOH_min = 5000, + .tRP_min = 10000, + .tRR_min = 20000, + .tRST_max = 500000000, + .tWB_max = 100000, + .tWC_min = 20000, + .tWH_min = 7000, + .tWHR_min = 80000, + .tWP_min = 10000, + .tWW_min = 100000, + }, +}; + +/** + * onfi_async_timing_mode_to_sdr_timings - [NAND Interface] Retrieve NAND + * timings according to the given ONFI timing mode + * @mode: ONFI timing mode + */ +const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode) +{ + if (mode < 0 || mode >= ARRAY_SIZE(onfi_sdr_timings)) + return ERR_PTR(-EINVAL); + + return &onfi_sdr_timings[mode]; +} +EXPORT_SYMBOL(onfi_async_timing_mode_to_sdr_timings); diff --git a/include/fsl_ifc.h b/include/fsl_ifc.h index a7ddd5fc88..a86f2162aa 100644 --- a/include/fsl_ifc.h +++ b/include/fsl_ifc.h @@ -19,10 +19,12 @@ #define ifc_in32(a) in_le32(a) #define ifc_out32(a, v) out_le32(a, v) #define ifc_in16(a) in_le16(a) +#define ifc_out16(a, v) out_le16(a, v) #elif defined(CONFIG_SYS_FSL_IFC_BE) #define ifc_in32(a) in_be32(a) #define ifc_out32(a, v) out_be32(a, v) #define ifc_in16(a) in_be16(a) +#define ifc_out16(a, v) out_be16(a, v) #else #error Neither CONFIG_SYS_FSL_IFC_LE nor CONFIG_SYS_FSL_IFC_BE is defined #endif diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 7c07087394..77b50ddcde 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -472,8 +472,21 @@ struct nand_hw_control { * be provided if an hardware ECC is available * @calculate: function for ECC calculation or readback from ECC hardware * @correct: function for ECC correction, matching to ECC generator (sw/hw) - * @read_page_raw: function to read a raw page without ECC - * @write_page_raw: function to write a raw page without ECC + * @read_page_raw: function to read a raw page without ECC. This function + * should hide the specific layout used by the ECC + * controller and always return contiguous in-band and + * out-of-band data even if they're not stored + * contiguously on the NAND chip (e.g. + * NAND_ECC_HW_SYNDROME interleaves in-band and + * out-of-band data). + * @write_page_raw: function to write a raw page without ECC. This function + * should hide the specific layout used by the ECC + * controller and consider the passed data as contiguous + * in-band and out-of-band data. ECC controller is + * responsible for doing the appropriate transformations + * to adapt to its specific layout (e.g. + * NAND_ECC_HW_SYNDROME interleaves in-band and + * out-of-band data). * @read_page: function to read a page according to the ECC generator * requirements; returns maximum number of bitflips corrected in * any single ECC step, 0 if bitflips uncorrectable, -EIO hw error @@ -575,8 +588,7 @@ struct nand_buffers { * @ecc: [BOARDSPECIFIC] ECC control structure * @buffers: buffer structure for read/write * @hwcontrol: platform-specific hardware control structure - * @erase_cmd: [INTERN] erase command write function, selectable due - * to AND support. + * @erase: [REPLACEABLE] erase function * @scan_bbt: [REPLACEABLE] function to scan bad block table * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transferring * data from array to read regs (tR). @@ -606,6 +618,11 @@ struct nand_buffers { * @ecc_step_ds: [INTERN] ECC step required by the @ecc_strength_ds, * also from the datasheet. It is the recommended ECC step * size, if known; if unknown, set to zero. + * @onfi_timing_mode_default: [INTERN] default ONFI timing mode. This field is + * either deduced from the datasheet if the NAND + * chip is not ONFI compliant or set to 0 if it is + * (an ONFI chip is always configured in mode 0 + * after a NAND reset) * @numchips: [INTERN] number of physical chips * @chipsize: [INTERN] the size of one chip for multichip arrays * @pagemask: [INTERN] page number mask = number of (pages / chip) - 1 @@ -660,7 +677,7 @@ struct nand_chip { void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr); int(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this); - void (*erase_cmd)(struct mtd_info *mtd, int page); + int (*erase)(struct mtd_info *mtd, int page); int (*scan_bbt)(struct mtd_info *mtd); int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page); @@ -690,6 +707,7 @@ struct nand_chip { uint8_t bits_per_cell; uint16_t ecc_strength_ds; uint16_t ecc_step_ds; + int onfi_timing_mode_default; int badblockpos; int badblockbits; @@ -737,6 +755,7 @@ struct nand_chip { #define NAND_MFR_EON 0x92 #define NAND_MFR_SANDISK 0x45 #define NAND_MFR_INTEL 0x89 +#define NAND_MFR_ATO 0x9b /* The maximum expected count of bytes in the NAND ID sequence */ #define NAND_MAX_ID_LEN 8 @@ -786,12 +805,17 @@ struct nand_chip { * @options: stores various chip bit options * @id_len: The valid length of the @id. * @oobsize: OOB size + * @ecc: ECC correctability and step information from the datasheet. * @ecc.strength_ds: The ECC correctability from the datasheet, same as the * @ecc_strength_ds in nand_chip{}. * @ecc.step_ds: The ECC step required by the @ecc.strength_ds, same as the * @ecc_step_ds in nand_chip{}, also from the datasheet. * For example, the "4bit ECC for each 512Byte" can be set with * NAND_ECC_INFO(4, 512). + * @onfi_timing_mode_default: the default ONFI timing mode entered after a NAND + * reset. Should be deduced from timings described + * in the datasheet. + * */ struct nand_flash_dev { char *name; @@ -812,6 +836,7 @@ struct nand_flash_dev { uint16_t strength_ds; uint16_t step_ds; } ecc; + int onfi_timing_mode_default; }; /** @@ -983,4 +1008,56 @@ void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len); void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len); void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len); uint8_t nand_read_byte(struct mtd_info *mtd); + +/* + * struct nand_sdr_timings - SDR NAND chip timings + * + * This struct defines the timing requirements of a SDR NAND chip. + * These informations can be found in every NAND datasheets and the timings + * meaning are described in the ONFI specifications: + * www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf (chapter 4.15 Timing + * Parameters) + * + * All these timings are expressed in picoseconds. + */ + +struct nand_sdr_timings { + u32 tALH_min; + u32 tADL_min; + u32 tALS_min; + u32 tAR_min; + u32 tCEA_max; + u32 tCEH_min; + u32 tCH_min; + u32 tCHZ_max; + u32 tCLH_min; + u32 tCLR_min; + u32 tCLS_min; + u32 tCOH_min; + u32 tCS_min; + u32 tDH_min; + u32 tDS_min; + u32 tFEAT_max; + u32 tIR_min; + u32 tITC_max; + u32 tRC_min; + u32 tREA_max; + u32 tREH_min; + u32 tRHOH_min; + u32 tRHW_min; + u32 tRHZ_max; + u32 tRLOH_min; + u32 tRP_min; + u32 tRR_min; + u64 tRST_max; + u32 tWB_max; + u32 tWC_min; + u32 tWH_min; + u32 tWHR_min; + u32 tWP_min; + u32 tWW_min; +}; + +/* get timing characteristics from ONFI timing mode. */ +const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode); #endif /* __LINUX_MTD_NAND_H */