From: Florian Fainelli <florian@openwrt.org>
Date: Fri, 8 Jun 2007 12:58:55 +0000 (+0000)
Subject: Resync adm5120 kernel config, lzma-loader fixes from Gabor
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=d28ca51872a803f9073dd72bce7208f5e05c62c6;p=librecmc%2Flibrecmc.git

Resync adm5120 kernel config, lzma-loader fixes from Gabor

SVN-Revision: 7536
---

diff --git a/target/linux/adm5120-2.6/config/default b/target/linux/adm5120-2.6/config/default
index f4361a9c8c..d83efc2baf 100644
--- a/target/linux/adm5120-2.6/config/default
+++ b/target/linux/adm5120-2.6/config/default
@@ -15,7 +15,7 @@ CONFIG_CIFS_EXPERIMENTAL=y
 CONFIG_CIFS_STATS2=y
 CONFIG_CIFS_WEAK_PW_HASH=y
 CONFIG_CIFS_XATTR=y
-CONFIG_CMDLINE="console=ttyS0,115200 rootfs=jffs2,squashfs init=/etc/preinit"
+CONFIG_CMDLINE="console=ttyS0,115200 rootfs=jffs2,squashfs,yaffs2 init=/etc/preinit"
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_PREFETCH=y
@@ -63,8 +63,6 @@ CONFIG_GENERIC_GPIO=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HID_FF is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_HW_HAS_PCI=y
@@ -88,6 +86,7 @@ CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IRQ_CPU=y
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_POSIX_ACL=y
@@ -268,7 +267,6 @@ CONFIG_USB_ADM5120_HCD=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_USB_USBNET_MII is not set
-CONFIG_USB_YEALINK=m
 # CONFIG_USB_ZD1201 is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_YAFFS_9BYTE_TAGS=y
diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/decompress.c b/target/linux/adm5120-2.6/image/lzma-loader/src/decompress.c
index f867e20dc5..ffc87ee0db 100644
--- a/target/linux/adm5120-2.6/image/lzma-loader/src/decompress.c
+++ b/target/linux/adm5120-2.6/image/lzma-loader/src/decompress.c
@@ -277,9 +277,20 @@ void decompress_entry(unsigned long reg_a0, unsigned long reg_a1,
 		(unsigned char*)LOADADDR, osize, &i);
 #endif
 	if (res != LZMA_RESULT_OK) {
-		print_str("failed, LzmaDecode error: ");
-		print_hex(res);
-		print_str("\n");
+		print_str("failed!\n");
+		print_str("LzmaDecode: ");
+		switch (res) {
+		case LZMA_RESULT_DATA_ERROR:
+			print_str("data error\n");
+			break;
+		case LZMA_RESULT_NOT_ENOUGH_MEM:
+			print_str("not enough memory\n");
+			break;
+		default:
+			print_str("unknown error, err=0x");
+			print_hex(res);
+			print_str("\n");
+		}
 		halt();
 	}
 
diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/loader.lds b/target/linux/adm5120-2.6/image/lzma-loader/src/loader.lds
index f9358257c9..bae70fb6ea 100644
--- a/target/linux/adm5120-2.6/image/lzma-loader/src/loader.lds
+++ b/target/linux/adm5120-2.6/image/lzma-loader/src/loader.lds
@@ -6,6 +6,8 @@ SECTIONS {
 		*(.text.*)
 		*(.rodata)
 		*(.rodata.*)
+		. = ALIGN(16);
+		*(.data.lzma)
 	}
 
 	.data : {
diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/lzma-data.lds b/target/linux/adm5120-2.6/image/lzma-loader/src/lzma-data.lds
index b6984d742a..abf756ba13 100644
--- a/target/linux/adm5120-2.6/image/lzma-loader/src/lzma-data.lds
+++ b/target/linux/adm5120-2.6/image/lzma-loader/src/lzma-data.lds
@@ -1,7 +1,6 @@
 OUTPUT_ARCH(mips)
 SECTIONS {
-	.rodata : {
-		. = ALIGN(16);
+	.data.lzma : {
 		_lzma_data_start = .;
 		*(.data)
 		_lzma_data_end = .;