From: Jagan Teki Date: Sat, 4 Aug 2018 19:10:09 +0000 (+0530) Subject: ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 X-Git-Tag: v2018.11-rc1~27^2~2 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=d1d4295aab97306454254989c8080f5093360af4;p=oweals%2Fu-boot.git ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3 Update all A31/A31s devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commit: commit b240b419db5d624ce7a5a397d6f62a1a686009ec Merge: 9c2dd8405c0c 518d2f43c358 Author: Linus Torvalds Date: Thu Apr 5 21:18:09 2018 -0700 Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Signed-off-by: Jagan Teki --- diff --git a/arch/arm/dts/sun6i-a31-app4-evb1.dts b/arch/arm/dts/sun6i-a31-app4-evb1.dts index 2f8cfab771..7f34323a66 100644 --- a/arch/arm/dts/sun6i-a31-app4-evb1.dts +++ b/arch/arm/dts/sun6i-a31-app4-evb1.dts @@ -47,7 +47,6 @@ #include "sunxi-common-regulators.dtsi" #include -#include / { model = "Allwinner A31 APP4 EVB1 Evaluation Board"; @@ -68,10 +67,8 @@ &pio { usb1_vbus_pin_a: usb1_vbus_pin@0 { - allwinner,pins = "PH27"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH27"; + function = "gpio_out"; }; }; diff --git a/arch/arm/dts/sun6i-a31-colombus.dts b/arch/arm/dts/sun6i-a31-colombus.dts index f9cf36888d..939c497a6f 100644 --- a/arch/arm/dts/sun6i-a31-colombus.dts +++ b/arch/arm/dts/sun6i-a31-colombus.dts @@ -47,7 +47,6 @@ #include "sunxi-common-regulators.dtsi" #include -#include / { model = "WITS A31 Colombus Evaluation Board"; @@ -118,35 +117,30 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; - cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ - cd-inverted; + cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ status = "okay"; }; &mmc0_pins_a { - allwinner,pull = ; + bias-pull-up; }; &pio { mmc0_cd_pin_colombus: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PA8"; + function = "gpio_in"; + bias-pull-up; }; usb2_vbus_pin_colombus: usb2_vbus_pin@0 { - allwinner,pins = "PH24"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH24"; + function = "gpio_out"; }; i2c_lcd_pins: i2c_lcd_pin@0 { - allwinner,pins = "PA23", "PA24"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PA23", "PA24"; + function = "gpio_out"; + bias-pull-up; }; }; diff --git a/arch/arm/dts/sun6i-a31-hummingbird.dts b/arch/arm/dts/sun6i-a31-hummingbird.dts index 9a74637f67..ce4f9e9834 100644 --- a/arch/arm/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/dts/sun6i-a31-hummingbird.dts @@ -47,7 +47,6 @@ #include "sunxi-common-regulators.dtsi" #include -#include / { model = "Merrii A31 Hummingbird"; @@ -63,16 +62,98 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + vga-connector { + compatible = "vga-connector"; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_dac_out>; + }; + }; + }; + + vga-dac { + compatible = "dumb-vga-dac"; + vdd-supply = <®_vga_3v3>; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + vga_dac_in: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_vga>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + vga_dac_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + + reg_vga_3v3: vga_3v3_regulator { + compatible = "regulator-fixed"; + regulator-name = "vga-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */ + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */ }; }; +&codec { + allwinner,audio-routing = + "Headphone", "HP", + "Speaker", "LINEOUT", + "LINEIN", "Line In", + "MIC1", "Mic", + "MIC2", "Headset Mic", + "Mic", "MBIAS", + "Headset Mic", "HBIAS"; + allwinner,pa-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ + status = "okay"; +}; + &cpu0 { cpu-supply = <®_dcdc3>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -92,6 +173,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -127,14 +218,13 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>; vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ - cd-inverted; + cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ status = "okay"; }; &mmc0_pins_a { /* external pull-ups missing for some pins */ - allwinner,pull = ; + bias-pull-up; }; &mmc1 { @@ -153,24 +243,19 @@ &pio { gmac_phy_reset_pin_hummingbird: gmac_phy_reset_pin@0 { - allwinner,pins = "PA21"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PA21"; + function = "gpio_out"; }; mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PA8"; + function = "gpio_in"; + bias-pull-up; }; wifi_reset_pin_hummingbird: wifi_reset_pin@0 { - allwinner,pins = "PG10"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG10"; + function = "gpio_out"; }; }; @@ -182,11 +267,16 @@ reg = <0x68>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + x-powers,drive-vbus-en; }; }; #include "axp22x.dtsi" +&ac_power_supply { + status = "okay"; +}; + ®_aldo1 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -240,23 +330,48 @@ regulator-name = "vcc-dram"; }; +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + ®_usb1_vbus { gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */ status = "okay"; }; +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd0_rgb888_pins>; +}; + +&tcon0_out { + tcon0_out_vga: endpoint@0 { + reg = <0>; + remote-endpoint = <&vga_dac_in>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; -&usb1_vbus_pin_a { - /* different pin from sunxi-common-regulators */ - allwinner,pins = "PH24"; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; }; &usbphy { + usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ + usb0_vbus_det-gpio = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; }; diff --git a/arch/arm/dts/sun6i-a31-i7.dts b/arch/arm/dts/sun6i-a31-i7.dts index e9185dad67..d659be9dbc 100644 --- a/arch/arm/dts/sun6i-a31-i7.dts +++ b/arch/arm/dts/sun6i-a31-i7.dts @@ -45,7 +45,6 @@ #include "sunxi-common-regulators.dtsi" #include -#include / { model = "Mele I7 Quad top set box"; @@ -59,6 +58,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -69,6 +79,33 @@ gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; }; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board SPDIF"; + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; +}; + +&codec { + allwinner,audio-routing = + "Headphone", "HP"; + status = "okay"; +}; + +&de { + status = "okay"; }; &ehci0 { @@ -91,6 +128,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; @@ -102,31 +149,25 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_i7>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ - cd-inverted; + cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ status = "okay"; }; &pio { led_pins_i7: led_pins@0 { - allwinner,pins = "PH13"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH13"; + function = "gpio_out"; }; mmc0_cd_pin_i7: mmc0_cd_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH22"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_i7: usb1_vbus_pin@0 { - allwinner,pins = "PC27"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PC27"; + function = "gpio_out"; }; }; @@ -137,6 +178,17 @@ status = "okay"; }; +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&spdif_pins_a>; + spdif-out = "okay"; + status = "okay"; +}; + +&tcon0 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/dts/sun6i-a31-m9.dts b/arch/arm/dts/sun6i-a31-m9.dts index 29016a13a2..9698f6d38d 100644 --- a/arch/arm/dts/sun6i-a31-m9.dts +++ b/arch/arm/dts/sun6i-a31-m9.dts @@ -45,7 +45,6 @@ #include "sunxi-common-regulators.dtsi" #include -#include / { model = "Mele M9 top set box"; @@ -108,8 +107,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ - cd-inverted; + cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ status = "okay"; }; @@ -128,24 +126,19 @@ &pio { led_pins_m9: led_pins@0 { - allwinner,pins = "PH13"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH13"; + function = "gpio_out"; }; mmc0_cd_pin_m9: mmc0_cd_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH22"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_m9: usb1_vbus_pin@0 { - allwinner,pins = "PC27"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PC27"; + function = "gpio_out"; }; }; diff --git a/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts index 5faeae429e..bb14b171b1 100644 --- a/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts +++ b/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts @@ -45,7 +45,6 @@ #include "sunxi-common-regulators.dtsi" #include -#include / { model = "Mele A1000G Quad top set box"; @@ -108,8 +107,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ - cd-inverted; + cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ status = "okay"; }; @@ -128,24 +126,19 @@ &pio { led_pins_m9: led_pins@0 { - allwinner,pins = "PH13"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH13"; + function = "gpio_out"; }; mmc0_cd_pin_m9: mmc0_cd_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH22"; + function = "gpio_in"; + bias-pull-up; }; usb1_vbus_pin_m9: usb1_vbus_pin@0 { - allwinner,pins = "PC27"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PC27"; + function = "gpio_out"; }; }; diff --git a/arch/arm/dts/sun6i-a31.dtsi b/arch/arm/dts/sun6i-a31.dtsi index b674bf79bc..c72992556a 100644 --- a/arch/arm/dts/sun6i-a31.dtsi +++ b/arch/arm/dts/sun6i-a31.dtsi @@ -47,7 +47,8 @@ #include #include -#include +#include +#include / { interrupt-parent = <&gic>; @@ -65,7 +66,10 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&pll6 0>; + clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_AHB1_LCD0>, + <&ccu CLK_AHB1_HDMI>, <&ccu CLK_DRAM_BE0>, + <&ccu CLK_IEP_DRC0>, <&ccu CLK_BE0>, + <&ccu CLK_LCD0_CH1>, <&ccu CLK_HDMI>; status = "disabled"; }; @@ -73,7 +77,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; - clocks = <&pll6 0>; + clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_AHB1_LCD0>, + <&ccu CLK_DRAM_BE0>, <&ccu CLK_IEP_DRC0>, + <&ccu CLK_BE0>, <&ccu CLK_LCD0_CH0>; status = "disabled"; }; }; @@ -97,7 +103,7 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; - clocks = <&cpu>; + clocks = <&ccu CLK_CPU>; clock-latency = <244144>; /* 8 32k periods */ operating-points = < /* kHz uV */ @@ -107,8 +113,6 @@ 480000 1000000 >; #cooling-cells = <2>; - cooling-min-level = <0>; - cooling-max-level = <3>; }; cpu@1 { @@ -192,235 +196,6 @@ clock-output-names = "osc32k"; }; - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun6i-a31-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun6i-a31-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6", "pll6x2"; - }; - - cpu: cpu@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20050 0x4>; - - /* - * PLL1 is listed twice here. - * While it looks suspicious, it's actually documented - * that way both in the datasheet and in the code from - * Allwinner. - */ - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>; - clock-output-names = "cpu"; - }; - - axi: axi@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-axi-clk"; - reg = <0x01c20050 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - ahb1: ahb1@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun6i-a31-ahb1-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; - clock-output-names = "ahb1"; - - /* - * Clock AHB1 from PLL6, instead of CPU/AXI which - * has rate changes due to cpufreq. Also the DMA - * controller requires AHB1 clocked from PLL6. - */ - assigned-clocks = <&ahb1>; - assigned-clock-parents = <&pll6 0>; - }; - - ahb1_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun6i-a31-ahb1-gates-clk"; - reg = <0x01c20060 0x8>; - clocks = <&ahb1>; - clock-indices = <1>, <5>, - <6>, <8>, <9>, - <10>, <11>, <12>, - <13>, <14>, - <17>, <18>, <19>, - <20>, <21>, <22>, - <23>, <24>, <26>, - <27>, <29>, - <30>, <31>, <32>, - <36>, <37>, <40>, - <43>, <44>, <45>, - <46>, <47>, <50>, - <52>, <55>, <56>, - <57>, <58>; - clock-output-names = "ahb1_mipidsi", "ahb1_ss", - "ahb1_dma", "ahb1_mmc0", "ahb1_mmc1", - "ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1", - "ahb1_nand0", "ahb1_sdram", - "ahb1_gmac", "ahb1_ts", "ahb1_hstimer", - "ahb1_spi0", "ahb1_spi1", "ahb1_spi2", - "ahb1_spi3", "ahb1_otg", "ahb1_ehci0", - "ahb1_ehci1", "ahb1_ohci0", - "ahb1_ohci1", "ahb1_ohci2", "ahb1_ve", - "ahb1_lcd0", "ahb1_lcd1", "ahb1_csi", - "ahb1_hdmi", "ahb1_de0", "ahb1_de1", - "ahb1_fe0", "ahb1_fe1", "ahb1_mp", - "ahb1_gpu", "ahb1_deu0", "ahb1_deu1", - "ahb1_drc0", "ahb1_drc1"; - }; - - apb1: apb1@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb1>; - clock-output-names = "apb1"; - }; - - apb1_gates: clk@01c20068 { - #clock-cells = <1>; - compatible = "allwinner,sun6i-a31-apb1-gates-clk"; - reg = <0x01c20068 0x4>; - clocks = <&apb1>; - clock-indices = <0>, <4>, - <5>, <12>, - <13>; - clock-output-names = "apb1_codec", "apb1_digital_mic", - "apb1_pio", "apb1_daudio0", - "apb1_daudio1"; - }; - - apb2: clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; - clock-output-names = "apb2"; - }; - - apb2_gates: clk@01c2006c { - #clock-cells = <1>; - compatible = "allwinner,sun6i-a31-apb2-gates-clk"; - reg = <0x01c2006c 0x4>; - clocks = <&apb2>; - clock-indices = <0>, <1>, - <2>, <3>, <16>, - <17>, <18>, <19>, - <20>, <21>; - clock-output-names = "apb2_i2c0", "apb2_i2c1", - "apb2_i2c2", "apb2_i2c3", - "apb2_uart0", "apb2_uart1", - "apb2_uart2", "apb2_uart3", - "apb2_uart4", "apb2_uart5"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 0>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 0>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 0>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - - mmc3_clk: clk@01c20094 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20094 0x4>; - clocks = <&osc24M>, <&pll6 0>; - clock-output-names = "mmc3", - "mmc3_output", - "mmc3_sample"; - }; - - ss_clk: clk@01c2009c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c2009c 0x4>; - clocks = <&osc24M>, <&pll6 0>; - clock-output-names = "ss"; - }; - - spi0_clk: clk@01c200a0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a0 0x4>; - clocks = <&osc24M>, <&pll6 0>; - clock-output-names = "spi0"; - }; - - spi1_clk: clk@01c200a4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a4 0x4>; - clocks = <&osc24M>, <&pll6 0>; - clock-output-names = "spi1"; - }; - - spi2_clk: clk@01c200a8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a8 0x4>; - clocks = <&osc24M>, <&pll6 0>; - clock-output-names = "spi2"; - }; - - spi3_clk: clk@01c200ac { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200ac 0x4>; - clocks = <&osc24M>, <&pll6 0>; - clock-output-names = "spi3"; - }; - - usb_clk: clk@01c200cc { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-usb-clk"; - reg = <0x01c200cc 0x4>; - clocks = <&osc24M>; - clock-indices = <8>, <9>, <10>, - <16>, <17>, - <18>; - clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2", - "usb_ohci0", "usb_ohci1", - "usb_ohci2"; - }; - /* * The following two are dummy clocks, placeholders * used in the gmac_tx clock. The gmac driver will @@ -444,7 +219,7 @@ clock-output-names = "gmac_int_tx"; }; - gmac_tx_clk: clk@01c200d0 { + gmac_tx_clk: clk@1c200d0 { #clock-cells = <0>; compatible = "allwinner,sun7i-a20-gmac-clk"; reg = <0x01c200d0 0x4>; @@ -453,34 +228,135 @@ }; }; - soc@01c00000 { + de: display-engine { + compatible = "allwinner,sun6i-a31-display-engine"; + allwinner,pipelines = <&fe0>, <&fe1>; + status = "disabled"; + }; + + soc@1c00000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; - dma: dma-controller@01c02000 { + dma: dma-controller@1c02000 { compatible = "allwinner,sun6i-a31-dma"; reg = <0x01c02000 0x1000>; interrupts = ; - clocks = <&ahb1_gates 6>; - resets = <&ahb1_rst 6>; + clocks = <&ccu CLK_AHB1_DMA>; + resets = <&ccu RST_AHB1_DMA>; #dma-cells = <1>; }; - mmc0: mmc@01c0f000 { - compatible = "allwinner,sun7i-a20-mmc", - "allwinner,sun5i-a13-mmc"; + tcon0: lcd-controller@1c0c000 { + compatible = "allwinner,sun6i-a31-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = ; + resets = <&ccu RST_AHB1_LCD0>; + reset-names = "lcd"; + clocks = <&ccu CLK_AHB1_LCD0>, + <&ccu CLK_LCD0_CH0>, + <&ccu CLK_LCD0_CH1>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon0-pixel-clock"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_drc0: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc0_out_tcon0>; + }; + + tcon0_in_drc1: endpoint@1 { + reg = <1>; + remote-endpoint = <&drc1_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon0_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon0>; + allwinner,tcon-channel = <1>; + }; + }; + }; + }; + + tcon1: lcd-controller@1c0d000 { + compatible = "allwinner,sun6i-a31-tcon"; + reg = <0x01c0d000 0x1000>; + interrupts = ; + resets = <&ccu RST_AHB1_LCD1>; + reset-names = "lcd"; + clocks = <&ccu CLK_AHB1_LCD1>, + <&ccu CLK_LCD1_CH0>, + <&ccu CLK_LCD1_CH1>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon1-pixel-clock"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon1_in_drc0: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc0_out_tcon1>; + }; + + tcon1_in_drc1: endpoint@1 { + reg = <1>; + remote-endpoint = <&drc1_out_tcon1>; + }; + }; + + tcon1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon1_out_hdmi: endpoint@1 { + reg = <1>; + remote-endpoint = <&hdmi_in_tcon1>; + allwinner,tcon-channel = <1>; + }; + }; + }; + }; + + mmc0: mmc@1c0f000 { + compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&ahb1_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; + clocks = <&ccu CLK_AHB1_MMC0>, + <&ccu CLK_MMC0>, + <&ccu CLK_MMC0_OUTPUT>, + <&ccu CLK_MMC0_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; - resets = <&ahb1_rst 8>; + resets = <&ccu RST_AHB1_MMC0>; reset-names = "ahb"; interrupts = ; status = "disabled"; @@ -488,19 +364,18 @@ #size-cells = <0>; }; - mmc1: mmc@01c10000 { - compatible = "allwinner,sun7i-a20-mmc", - "allwinner,sun5i-a13-mmc"; + mmc1: mmc@1c10000 { + compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&ahb1_gates 9>, - <&mmc1_clk 0>, - <&mmc1_clk 1>, - <&mmc1_clk 2>; + clocks = <&ccu CLK_AHB1_MMC1>, + <&ccu CLK_MMC1>, + <&ccu CLK_MMC1_OUTPUT>, + <&ccu CLK_MMC1_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; - resets = <&ahb1_rst 9>; + resets = <&ccu RST_AHB1_MMC1>; reset-names = "ahb"; interrupts = ; status = "disabled"; @@ -508,19 +383,18 @@ #size-cells = <0>; }; - mmc2: mmc@01c11000 { - compatible = "allwinner,sun7i-a20-mmc", - "allwinner,sun5i-a13-mmc"; + mmc2: mmc@1c11000 { + compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&ahb1_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; + clocks = <&ccu CLK_AHB1_MMC2>, + <&ccu CLK_MMC2>, + <&ccu CLK_MMC2_OUTPUT>, + <&ccu CLK_MMC2_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; - resets = <&ahb1_rst 10>; + resets = <&ccu RST_AHB1_MMC2>; reset-names = "ahb"; interrupts = ; status = "disabled"; @@ -528,19 +402,18 @@ #size-cells = <0>; }; - mmc3: mmc@01c12000 { - compatible = "allwinner,sun7i-a20-mmc", - "allwinner,sun5i-a13-mmc"; + mmc3: mmc@1c12000 { + compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c12000 0x1000>; - clocks = <&ahb1_gates 11>, - <&mmc3_clk 0>, - <&mmc3_clk 1>, - <&mmc3_clk 2>; + clocks = <&ccu CLK_AHB1_MMC3>, + <&ccu CLK_MMC3>, + <&ccu CLK_MMC3_OUTPUT>, + <&ccu CLK_MMC3_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; - resets = <&ahb1_rst 11>; + resets = <&ccu RST_AHB1_MMC3>; reset-names = "ahb"; interrupts = ; status = "disabled"; @@ -548,11 +421,54 @@ #size-cells = <0>; }; - usb_otg: usb@01c19000 { + hdmi: hdmi@1c16000 { + compatible = "allwinner,sun6i-a31-hdmi"; + reg = <0x01c16000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_AHB1_HDMI>, <&ccu CLK_HDMI>, + <&ccu CLK_HDMI_DDC>, + <&ccu CLK_PLL_VIDEO0_2X>, + <&ccu CLK_PLL_VIDEO1_2X>; + clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1"; + resets = <&ccu RST_AHB1_HDMI>; + reset-names = "ahb"; + dma-names = "ddc-tx", "ddc-rx", "audio-tx"; + dmas = <&dma 13>, <&dma 13>, <&dma 14>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hdmi_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_hdmi>; + }; + + hdmi_in_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + + usb_otg: usb@1c19000 { compatible = "allwinner,sun6i-a31-musb"; reg = <0x01c19000 0x0400>; - clocks = <&ahb1_gates 24>; - resets = <&ahb1_rst 24>; + clocks = <&ccu CLK_AHB1_OTG>; + resets = <&ccu RST_AHB1_OTG>; interrupts = ; interrupt-names = "mc"; phys = <&usbphy 0>; @@ -561,7 +477,7 @@ status = "disabled"; }; - usbphy: phy@01c19400 { + usbphy: phy@1c19400 { compatible = "allwinner,sun6i-a31-usb-phy"; reg = <0x01c19400 0x10>, <0x01c1a800 0x4>, @@ -569,15 +485,15 @@ reg-names = "phy_ctrl", "pmu1", "pmu2"; - clocks = <&usb_clk 8>, - <&usb_clk 9>, - <&usb_clk 10>; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>, + <&ccu CLK_USB_PHY2>; clock-names = "usb0_phy", "usb1_phy", "usb2_phy"; - resets = <&usb_clk 0>, - <&usb_clk 1>, - <&usb_clk 2>; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_PHY2>; reset-names = "usb0_reset", "usb1_reset", "usb2_reset"; @@ -585,206 +501,202 @@ #phy-cells = <1>; }; - ehci0: usb@01c1a000 { + ehci0: usb@1c1a000 { compatible = "allwinner,sun6i-a31-ehci", "generic-ehci"; reg = <0x01c1a000 0x100>; interrupts = ; - clocks = <&ahb1_gates 26>; - resets = <&ahb1_rst 26>; + clocks = <&ccu CLK_AHB1_EHCI0>; + resets = <&ccu RST_AHB1_EHCI0>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; }; - ohci0: usb@01c1a400 { + ohci0: usb@1c1a400 { compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; reg = <0x01c1a400 0x100>; interrupts = ; - clocks = <&ahb1_gates 29>, <&usb_clk 16>; - resets = <&ahb1_rst 29>; + clocks = <&ccu CLK_AHB1_OHCI0>, <&ccu CLK_USB_OHCI0>; + resets = <&ccu RST_AHB1_OHCI0>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; }; - ehci1: usb@01c1b000 { + ehci1: usb@1c1b000 { compatible = "allwinner,sun6i-a31-ehci", "generic-ehci"; reg = <0x01c1b000 0x100>; interrupts = ; - clocks = <&ahb1_gates 27>; - resets = <&ahb1_rst 27>; + clocks = <&ccu CLK_AHB1_EHCI1>; + resets = <&ccu RST_AHB1_EHCI1>; phys = <&usbphy 2>; phy-names = "usb"; status = "disabled"; }; - ohci1: usb@01c1b400 { + ohci1: usb@1c1b400 { compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; reg = <0x01c1b400 0x100>; interrupts = ; - clocks = <&ahb1_gates 30>, <&usb_clk 17>; - resets = <&ahb1_rst 30>; + clocks = <&ccu CLK_AHB1_OHCI1>, <&ccu CLK_USB_OHCI1>; + resets = <&ccu RST_AHB1_OHCI1>; phys = <&usbphy 2>; phy-names = "usb"; status = "disabled"; }; - ohci2: usb@01c1c400 { + ohci2: usb@1c1c400 { compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; reg = <0x01c1c400 0x100>; interrupts = ; - clocks = <&ahb1_gates 31>, <&usb_clk 18>; - resets = <&ahb1_rst 31>; + clocks = <&ccu CLK_AHB1_OHCI2>, <&ccu CLK_USB_OHCI2>; + resets = <&ccu RST_AHB1_OHCI2>; status = "disabled"; }; - pio: pinctrl@01c20800 { + ccu: clock@1c20000 { + compatible = "allwinner,sun6i-a31-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pio: pinctrl@1c20800 { compatible = "allwinner,sun6i-a31-pinctrl"; reg = <0x01c20800 0x400>; interrupts = , , , ; - clocks = <&apb1_gates 5>; + clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; #gpio-cells = <3>; - uart0_pins_a: uart0@0 { - allwinner,pins = "PH20", "PH21"; - allwinner,function = "uart0"; - allwinner,drive = ; - allwinner,pull = ; + gmac_pins_gmii_a: gmac_gmii@0 { + pins = "PA0", "PA1", "PA2", "PA3", + "PA4", "PA5", "PA6", "PA7", + "PA8", "PA9", "PA10", "PA11", + "PA12", "PA13", "PA14", "PA15", + "PA16", "PA17", "PA18", "PA19", + "PA20", "PA21", "PA22", "PA23", + "PA24", "PA25", "PA26", "PA27"; + function = "gmac"; + /* + * data lines in GMII mode run at 125MHz and + * might need a higher signal drive strength + */ + drive-strength = <30>; + }; + + gmac_pins_mii_a: gmac_mii@0 { + pins = "PA0", "PA1", "PA2", "PA3", + "PA8", "PA9", "PA11", + "PA12", "PA13", "PA14", "PA19", + "PA20", "PA21", "PA22", "PA23", + "PA24", "PA26", "PA27"; + function = "gmac"; + }; + + gmac_pins_rgmii_a: gmac_rgmii@0 { + pins = "PA0", "PA1", "PA2", "PA3", + "PA9", "PA10", "PA11", + "PA12", "PA13", "PA14", "PA19", + "PA20", "PA25", "PA26", "PA27"; + function = "gmac"; + /* + * data lines in RGMII mode use DDR mode + * and need a higher signal drive strength + */ + drive-strength = <40>; }; i2c0_pins_a: i2c0@0 { - allwinner,pins = "PH14", "PH15"; - allwinner,function = "i2c0"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH14", "PH15"; + function = "i2c0"; }; i2c1_pins_a: i2c1@0 { - allwinner,pins = "PH16", "PH17"; - allwinner,function = "i2c1"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH16", "PH17"; + function = "i2c1"; }; i2c2_pins_a: i2c2@0 { - allwinner,pins = "PH18", "PH19"; - allwinner,function = "i2c2"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH18", "PH19"; + function = "i2c2"; + }; + + lcd0_rgb888_pins: lcd0_rgb888 { + pins = "PD0", "PD1", "PD2", "PD3", + "PD4", "PD5", "PD6", "PD7", + "PD8", "PD9", "PD10", "PD11", + "PD12", "PD13", "PD14", "PD15", + "PD16", "PD17", "PD18", "PD19", + "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + function = "lcd0"; }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", + pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = ; - allwinner,pull = ; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; }; mmc1_pins_a: mmc1@0 { - allwinner,pins = "PG0", "PG1", "PG2", "PG3", + pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; - allwinner,function = "mmc1"; - allwinner,drive = ; - allwinner,pull = ; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; }; mmc2_pins_a: mmc2@0 { - allwinner,pins = "PC6", "PC7", "PC8", "PC9", + pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11"; - allwinner,function = "mmc2"; - allwinner,drive = ; - allwinner,pull = ; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; }; mmc2_8bit_emmc_pins: mmc2@1 { - allwinner,pins = "PC6", "PC7", "PC8", "PC9", + pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PC24"; - allwinner,function = "mmc2"; - allwinner,drive = ; - allwinner,pull = ; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; }; mmc3_8bit_emmc_pins: mmc3@1 { - allwinner,pins = "PC6", "PC7", "PC8", "PC9", + pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PC24"; - allwinner,function = "mmc3"; - allwinner,drive = ; - allwinner,pull = ; + function = "mmc3"; + drive-strength = <40>; + bias-pull-up; }; - gmac_pins_mii_a: gmac_mii@0 { - allwinner,pins = "PA0", "PA1", "PA2", "PA3", - "PA8", "PA9", "PA11", - "PA12", "PA13", "PA14", "PA19", - "PA20", "PA21", "PA22", "PA23", - "PA24", "PA26", "PA27"; - allwinner,function = "gmac"; - allwinner,drive = ; - allwinner,pull = ; - }; - - gmac_pins_gmii_a: gmac_gmii@0 { - allwinner,pins = "PA0", "PA1", "PA2", "PA3", - "PA4", "PA5", "PA6", "PA7", - "PA8", "PA9", "PA10", "PA11", - "PA12", "PA13", "PA14", "PA15", - "PA16", "PA17", "PA18", "PA19", - "PA20", "PA21", "PA22", "PA23", - "PA24", "PA25", "PA26", "PA27"; - allwinner,function = "gmac"; - /* - * data lines in GMII mode run at 125MHz and - * might need a higher signal drive strength - */ - allwinner,drive = ; - allwinner,pull = ; + spdif_pins_a: spdif@0 { + pins = "PH28"; + function = "spdif"; }; - gmac_pins_rgmii_a: gmac_rgmii@0 { - allwinner,pins = "PA0", "PA1", "PA2", "PA3", - "PA9", "PA10", "PA11", - "PA12", "PA13", "PA14", "PA19", - "PA20", "PA25", "PA26", "PA27"; - allwinner,function = "gmac"; - /* - * data lines in RGMII mode use DDR mode - * and need a higher signal drive strength - */ - allwinner,drive = ; - allwinner,pull = ; + uart0_pins_a: uart0@0 { + pins = "PH20", "PH21"; + function = "uart0"; }; }; - ahb1_rst: reset@01c202c0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-ahb1-reset"; - reg = <0x01c202c0 0xc>; - }; - - apb1_rst: reset@01c202d0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x01c202d0 0x4>; - }; - - apb2_rst: reset@01c202d8 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x01c202d8 0x4>; - }; - - timer@01c20c00 { + timer@1c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0xa0>; interrupts = , @@ -795,155 +707,194 @@ clocks = <&osc24M>; }; - wdt1: watchdog@01c20ca0 { + wdt1: watchdog@1c20ca0 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; }; - lradc: lradc@01c22800 { + spdif: spdif@1c21000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun6i-a31-spdif"; + reg = <0x01c21000 0x400>; + interrupts = ; + clocks = <&ccu CLK_APB1_SPDIF>, <&ccu CLK_SPDIF>; + resets = <&ccu RST_APB1_SPDIF>; + clock-names = "apb", "spdif"; + dmas = <&dma 2>, <&dma 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2s0: i2s@1c22000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun6i-a31-i2s"; + reg = <0x01c22000 0x400>; + interrupts = ; + clocks = <&ccu CLK_APB1_DAUDIO0>, <&ccu CLK_DAUDIO0>; + resets = <&ccu RST_APB1_DAUDIO0>; + clock-names = "apb", "mod"; + dmas = <&dma 3>, <&dma 3>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2s1: i2s@1c22400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun6i-a31-i2s"; + reg = <0x01c22400 0x400>; + interrupts = ; + clocks = <&ccu CLK_APB1_DAUDIO1>, <&ccu CLK_DAUDIO1>; + resets = <&ccu RST_APB1_DAUDIO1>; + clock-names = "apb", "mod"; + dmas = <&dma 4>, <&dma 4>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + lradc: lradc@1c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; interrupts = ; status = "disabled"; }; - rtp: rtp@01c25000 { + rtp: rtp@1c25000 { compatible = "allwinner,sun6i-a31-ts"; reg = <0x01c25000 0x100>; interrupts = ; #thermal-sensor-cells = <0>; }; - uart0: serial@01c28000 { + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb2_gates 16>; - resets = <&apb2_rst 16>; + clocks = <&ccu CLK_APB2_UART0>; + resets = <&ccu RST_APB2_UART0>; dmas = <&dma 6>, <&dma 6>; dma-names = "rx", "tx"; status = "disabled"; }; - uart1: serial@01c28400 { + uart1: serial@1c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb2_gates 17>; - resets = <&apb2_rst 17>; + clocks = <&ccu CLK_APB2_UART1>; + resets = <&ccu RST_APB2_UART1>; dmas = <&dma 7>, <&dma 7>; dma-names = "rx", "tx"; status = "disabled"; }; - uart2: serial@01c28800 { + uart2: serial@1c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb2_gates 18>; - resets = <&apb2_rst 18>; + clocks = <&ccu CLK_APB2_UART2>; + resets = <&ccu RST_APB2_UART2>; dmas = <&dma 8>, <&dma 8>; dma-names = "rx", "tx"; status = "disabled"; }; - uart3: serial@01c28c00 { + uart3: serial@1c28c00 { compatible = "snps,dw-apb-uart"; reg = <0x01c28c00 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb2_gates 19>; - resets = <&apb2_rst 19>; + clocks = <&ccu CLK_APB2_UART3>; + resets = <&ccu RST_APB2_UART3>; dmas = <&dma 9>, <&dma 9>; dma-names = "rx", "tx"; status = "disabled"; }; - uart4: serial@01c29000 { + uart4: serial@1c29000 { compatible = "snps,dw-apb-uart"; reg = <0x01c29000 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb2_gates 20>; - resets = <&apb2_rst 20>; + clocks = <&ccu CLK_APB2_UART4>; + resets = <&ccu RST_APB2_UART4>; dmas = <&dma 10>, <&dma 10>; dma-names = "rx", "tx"; status = "disabled"; }; - uart5: serial@01c29400 { + uart5: serial@1c29400 { compatible = "snps,dw-apb-uart"; reg = <0x01c29400 0x400>; interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb2_gates 21>; - resets = <&apb2_rst 21>; + clocks = <&ccu CLK_APB2_UART5>; + resets = <&ccu RST_APB2_UART5>; dmas = <&dma 22>, <&dma 22>; dma-names = "rx", "tx"; status = "disabled"; }; - i2c0: i2c@01c2ac00 { + i2c0: i2c@1c2ac00 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2ac00 0x400>; interrupts = ; - clocks = <&apb2_gates 0>; - resets = <&apb2_rst 0>; + clocks = <&ccu CLK_APB2_I2C0>; + resets = <&ccu RST_APB2_I2C0>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - i2c1: i2c@01c2b000 { + i2c1: i2c@1c2b000 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b000 0x400>; interrupts = ; - clocks = <&apb2_gates 1>; - resets = <&apb2_rst 1>; + clocks = <&ccu CLK_APB2_I2C1>; + resets = <&ccu RST_APB2_I2C1>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - i2c2: i2c@01c2b400 { + i2c2: i2c@1c2b400 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b400 0x400>; interrupts = ; - clocks = <&apb2_gates 2>; - resets = <&apb2_rst 2>; + clocks = <&ccu CLK_APB2_I2C2>; + resets = <&ccu RST_APB2_I2C2>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - i2c3: i2c@01c2b800 { + i2c3: i2c@1c2b800 { compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b800 0x400>; interrupts = ; - clocks = <&apb2_gates 3>; - resets = <&apb2_rst 3>; + clocks = <&ccu CLK_APB2_I2C3>; + resets = <&ccu RST_APB2_I2C3>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; }; - gmac: ethernet@01c30000 { + gmac: ethernet@1c30000 { compatible = "allwinner,sun7i-a20-gmac"; reg = <0x01c30000 0x1054>; interrupts = ; interrupt-names = "macirq"; - clocks = <&ahb1_gates 17>, <&gmac_tx_clk>; + clocks = <&ccu CLK_AHB1_EMAC>, <&gmac_tx_clk>; clock-names = "stmmaceth", "allwinner_gmac_tx"; - resets = <&ahb1_rst 17>; + resets = <&ccu RST_AHB1_EMAC>; reset-names = "stmmaceth"; snps,pbl = <2>; snps,fixed-burst; @@ -953,17 +904,31 @@ #size-cells = <0>; }; - crypto: crypto-engine@01c15000 { - compatible = "allwinner,sun4i-a10-crypto"; + crypto: crypto-engine@1c15000 { + compatible = "allwinner,sun6i-a31-crypto", + "allwinner,sun4i-a10-crypto"; reg = <0x01c15000 0x1000>; interrupts = ; - clocks = <&ahb1_gates 5>, <&ss_clk>; + clocks = <&ccu CLK_AHB1_SS>, <&ccu CLK_SS>; clock-names = "ahb", "mod"; - resets = <&ahb1_rst 5>; + resets = <&ccu RST_AHB1_SS>; reset-names = "ahb"; }; - timer@01c60000 { + codec: codec@1c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun6i-a31-codec"; + reg = <0x01c22c00 0x400>; + interrupts = ; + clocks = <&ccu CLK_APB1_CODEC>, <&ccu CLK_CODEC>; + clock-names = "apb", "codec"; + resets = <&ccu RST_APB1_CODEC>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + timer@1c60000 { compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer"; reg = <0x01c60000 0x1000>; @@ -971,62 +936,62 @@ , , ; - clocks = <&ahb1_gates 19>; - resets = <&ahb1_rst 19>; + clocks = <&ccu CLK_AHB1_HSTIMER>; + resets = <&ccu RST_AHB1_HSTIMER>; }; - spi0: spi@01c68000 { + spi0: spi@1c68000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c68000 0x1000>; interrupts = ; - clocks = <&ahb1_gates 20>, <&spi0_clk>; + clocks = <&ccu CLK_AHB1_SPI0>, <&ccu CLK_SPI0>; clock-names = "ahb", "mod"; dmas = <&dma 23>, <&dma 23>; dma-names = "rx", "tx"; - resets = <&ahb1_rst 20>; + resets = <&ccu RST_AHB1_SPI0>; status = "disabled"; }; - spi1: spi@01c69000 { + spi1: spi@1c69000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c69000 0x1000>; interrupts = ; - clocks = <&ahb1_gates 21>, <&spi1_clk>; + clocks = <&ccu CLK_AHB1_SPI1>, <&ccu CLK_SPI1>; clock-names = "ahb", "mod"; dmas = <&dma 24>, <&dma 24>; dma-names = "rx", "tx"; - resets = <&ahb1_rst 21>; + resets = <&ccu RST_AHB1_SPI1>; status = "disabled"; }; - spi2: spi@01c6a000 { + spi2: spi@1c6a000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c6a000 0x1000>; interrupts = ; - clocks = <&ahb1_gates 22>, <&spi2_clk>; + clocks = <&ccu CLK_AHB1_SPI2>, <&ccu CLK_SPI2>; clock-names = "ahb", "mod"; dmas = <&dma 25>, <&dma 25>; dma-names = "rx", "tx"; - resets = <&ahb1_rst 22>; + resets = <&ccu RST_AHB1_SPI2>; status = "disabled"; }; - spi3: spi@01c6b000 { + spi3: spi@1c6b000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c6b000 0x1000>; interrupts = ; - clocks = <&ahb1_gates 23>, <&spi3_clk>; + clocks = <&ccu CLK_AHB1_SPI3>, <&ccu CLK_SPI3>; clock-names = "ahb", "mod"; dmas = <&dma 26>, <&dma 26>; dma-names = "rx", "tx"; - resets = <&ahb1_rst 23>; + resets = <&ccu RST_AHB1_SPI3>; status = "disabled"; }; - gic: interrupt-controller@01c81000 { + gic: interrupt-controller@1c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, - <0x01c82000 0x1000>, + <0x01c82000 0x2000>, <0x01c84000 0x2000>, <0x01c86000 0x2000>; interrupt-controller; @@ -1034,30 +999,279 @@ interrupts = ; }; - rtc: rtc@01f00000 { + fe0: display-frontend@1e00000 { + compatible = "allwinner,sun6i-a31-display-frontend"; + reg = <0x01e00000 0x20000>; + interrupts = ; + clocks = <&ccu CLK_AHB1_FE0>, <&ccu CLK_FE0>, + <&ccu CLK_DRAM_FE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_AHB1_FE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe0>; + }; + + fe0_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_fe0>; + }; + }; + }; + }; + + fe1: display-frontend@1e20000 { + compatible = "allwinner,sun6i-a31-display-frontend"; + reg = <0x01e20000 0x20000>; + interrupts = ; + clocks = <&ccu CLK_AHB1_FE1>, <&ccu CLK_FE1>, + <&ccu CLK_DRAM_FE1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_AHB1_FE1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe1_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe1>; + }; + + fe1_out_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_in_fe1>; + }; + }; + }; + }; + + be1: display-backend@1e40000 { + compatible = "allwinner,sun6i-a31-display-backend"; + reg = <0x01e40000 0x10000>; + interrupts = ; + clocks = <&ccu CLK_AHB1_BE1>, <&ccu CLK_BE1>, + <&ccu CLK_DRAM_BE1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_AHB1_BE1>; + + assigned-clocks = <&ccu CLK_BE1>; + assigned-clock-rates = <300000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be1_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be1>; + }; + + be1_in_fe1: endpoint@1 { + reg = <1>; + remote-endpoint = <&fe1_out_be1>; + }; + }; + + be1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be1_out_drc1: endpoint@1 { + reg = <1>; + remote-endpoint = <&drc1_in_be1>; + }; + }; + }; + }; + + drc1: drc@1e50000 { + compatible = "allwinner,sun6i-a31-drc"; + reg = <0x01e50000 0x10000>; + interrupts = ; + clocks = <&ccu CLK_AHB1_DRC1>, <&ccu CLK_IEP_DRC1>, + <&ccu CLK_DRAM_DRC1>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_AHB1_DRC1>; + + assigned-clocks = <&ccu CLK_IEP_DRC1>; + assigned-clock-rates = <300000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + drc1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + drc1_in_be1: endpoint@1 { + reg = <1>; + remote-endpoint = <&be1_out_drc1>; + }; + }; + + drc1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + drc1_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_drc1>; + }; + + drc1_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_drc1>; + }; + }; + }; + }; + + be0: display-backend@1e60000 { + compatible = "allwinner,sun6i-a31-display-backend"; + reg = <0x01e60000 0x10000>; + interrupts = ; + clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_BE0>, + <&ccu CLK_DRAM_BE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_AHB1_BE0>; + + assigned-clocks = <&ccu CLK_BE0>; + assigned-clock-rates = <300000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be0_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be0>; + }; + + be0_in_fe1: endpoint@1 { + reg = <1>; + remote-endpoint = <&fe1_out_be0>; + }; + }; + + be0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be0_out_drc0: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc0_in_be0>; + }; + }; + }; + }; + + drc0: drc@1e70000 { + compatible = "allwinner,sun6i-a31-drc"; + reg = <0x01e70000 0x10000>; + interrupts = ; + clocks = <&ccu CLK_AHB1_DRC0>, <&ccu CLK_IEP_DRC0>, + <&ccu CLK_DRAM_DRC0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_AHB1_DRC0>; + + assigned-clocks = <&ccu CLK_IEP_DRC0>; + assigned-clock-rates = <300000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + drc0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + drc0_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_drc0>; + }; + }; + + drc0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + drc0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_drc0>; + }; + + drc0_out_tcon1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon1_in_drc0>; + }; + }; + }; + }; + + rtc: rtc@1f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; interrupts = , ; }; - nmi_intc: interrupt-controller@01f00c0c { - compatible = "allwinner,sun6i-a31-sc-nmi"; + nmi_intc: interrupt-controller@1f00c00 { + compatible = "allwinner,sun6i-a31-r-intc"; interrupt-controller; #interrupt-cells = <2>; - reg = <0x01f00c0c 0x38>; + reg = <0x01f00c00 0x400>; interrupts = ; }; - prcm@01f01400 { + prcm@1f01400 { compatible = "allwinner,sun6i-a31-prcm"; reg = <0x01f01400 0x200>; ar100: ar100_clk { compatible = "allwinner,sun6i-a31-ar100-clk"; #clock-cells = <0>; - clocks = <&osc32k>, <&osc24M>, <&pll6 0>, - <&pll6 0>; + clocks = <&osc32k>, <&osc24M>, + <&ccu CLK_PLL_PERIPH>, + <&ccu CLK_PLL_PERIPH>; clock-output-names = "ar100"; }; @@ -1100,12 +1314,12 @@ }; }; - cpucfg@01f01c00 { + cpucfg@1f01c00 { compatible = "allwinner,sun6i-a31-cpuconfig"; reg = <0x01f01c00 0x300>; }; - ir: ir@01f02000 { + ir: ir@1f02000 { compatible = "allwinner,sun5i-a13-ir"; clocks = <&apb0_gates 1>, <&ir_clk>; clock-names = "apb", "ir"; @@ -1115,12 +1329,13 @@ status = "disabled"; }; - r_pio: pinctrl@01f02c00 { + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun6i-a31-r-pinctrl"; reg = <0x01f02c00 0x400>; interrupts = , ; - clocks = <&apb0_gates 0>; + clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; resets = <&apb0_rst 0>; gpio-controller; interrupt-controller; @@ -1129,21 +1344,17 @@ #gpio-cells = <3>; ir_pins_a: ir@0 { - allwinner,pins = "PL4"; - allwinner,function = "s_ir"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PL4"; + function = "s_ir"; }; p2wi_pins: p2wi { - allwinner,pins = "PL0", "PL1"; - allwinner,function = "s_p2wi"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PL0", "PL1"; + function = "s_p2wi"; }; }; - p2wi: i2c@01f03400 { + p2wi: i2c@1f03400 { compatible = "allwinner,sun6i-a31-p2wi"; reg = <0x01f03400 0x400>; interrupts = ; diff --git a/arch/arm/dts/sun6i-a31s-cs908.dts b/arch/arm/dts/sun6i-a31s-cs908.dts index 5e8f8c4f2b..75e578159c 100644 --- a/arch/arm/dts/sun6i-a31s-cs908.dts +++ b/arch/arm/dts/sun6i-a31s-cs908.dts @@ -43,8 +43,6 @@ /dts-v1/; #include "sun6i-a31s.dtsi" -#include - / { model = "CSQ CS908 top set box"; compatible = "csq,cs908", "allwinner,sun6i-a31s"; diff --git a/arch/arm/dts/sun6i-a31s-primo81.dts b/arch/arm/dts/sun6i-a31s-primo81.dts index 73c133f5e7..4cb9664cdb 100644 --- a/arch/arm/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/dts/sun6i-a31s-primo81.dts @@ -48,22 +48,46 @@ #include #include -#include / { model = "MSI Primo81 tablet"; compatible = "msi,primo81", "allwinner,sun6i-a31s"; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "c"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; }; &cpu0 { cpu-supply = <®_dcdc3>; }; +&de { + status = "okay"; +}; + &ehci0 { /* rtl8188etv wifi is connected here */ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { /* pull-ups and device VDDIO use AXP221 DLDO3 */ pinctrl-names = "default"; @@ -127,31 +151,26 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_primo81>; vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ - cd-inverted; + cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ status = "okay"; }; &pio { gt911_int_primo81: gt911_int_pin@0 { - allwinner,pins = "PA3"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PA3"; + function = "gpio_in"; }; mma8452_int_primo81: mma8452_int_pin@0 { - allwinner,pins = "PA9"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PA9"; + function = "gpio_in"; + bias-pull-up; }; mmc0_cd_pin_primo81: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PA8"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -163,11 +182,16 @@ reg = <0x68>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + x-powers,drive-vbus-en; }; }; #include "axp22x.dtsi" +&battery_power_supply { + status = "okay"; +}; + ®_aldo3 { regulator-always-on; regulator-min-microvolt = <2700000>; @@ -231,6 +255,11 @@ regulator-name = "vddio-csi"; }; +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + ®_eldo3 { regulator-min-microvolt = <1080000>; regulator-max-microvolt = <1320000>; @@ -243,12 +272,18 @@ }; &usb_otg { - /* otg support requires support for AXP221 usb-power-supply and GPIO */ - dr_mode = "host"; + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { status = "okay"; }; &usbphy { + usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_dldo1>; status = "okay"; }; diff --git a/arch/arm/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/dts/sun6i-a31s-sina31s-core.dtsi index 4ec0c8679b..d7325bc4ee 100644 --- a/arch/arm/dts/sun6i-a31s-sina31s-core.dtsi +++ b/arch/arm/dts/sun6i-a31s-sina31s-core.dtsi @@ -45,7 +45,6 @@ #include "sunxi-common-regulators.dtsi" #include -#include / { model = "Sinlinx SinA31s Core Board"; diff --git a/arch/arm/dts/sun6i-a31s-sina31s.dts b/arch/arm/dts/sun6i-a31s-sina31s.dts index 6ead2f5c84..da0ccf5a2c 100644 --- a/arch/arm/dts/sun6i-a31s-sina31s.dts +++ b/arch/arm/dts/sun6i-a31s-sina31s.dts @@ -53,6 +53,17 @@ stdout-path = "serial0:115200n8"; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -63,6 +74,35 @@ gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */ }; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board SPDIF"; + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; +}; + +&codec { + allwinner,audio-routing = + "Line Out", "LINEOUT", + "MIC1", "Mic", + "Mic", "MBIAS"; + status = "okay"; +}; + +&de { + status = "okay"; }; &ehci0 { @@ -87,6 +127,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &ir { pinctrl-names = "default"; pinctrl-0 = <&ir_pins_a>; @@ -117,8 +167,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina31s>; vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */ - cd-inverted; + cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */ status = "okay"; }; @@ -128,17 +177,14 @@ &pio { led_pin_sina31s: led_pin@0 { - allwinner,pins = "PH13"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PH13"; + function = "gpio_out"; }; mmc0_cd_pin_sina31s: mmc0_cd_pin@0 { - allwinner,pins = "PA4"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PA4"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -148,6 +194,17 @@ regulator-name = "vcc-gmac-phy"; }; +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&spdif_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + &usbphy { status = "okay"; }; diff --git a/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts index db7fa13f54..b8b79c0e9e 100644 --- a/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -42,7 +42,6 @@ /dts-v1/; #include "sun6i-a31s.dtsi" -#include "sunxi-common-regulators.dtsi" #include / { @@ -86,6 +85,10 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc3>; +}; + &ehci0 { status = "okay"; }; @@ -95,6 +98,7 @@ pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>; phy = <&phy1>; phy-mode = "rgmii"; + phy-supply = <®_dldo1>; snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */ snps,reset-active-low; snps,reset-delays-us = <0 10000 30000>; @@ -114,27 +118,26 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */ - cd-inverted; + cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */ status = "okay"; }; &mmc0_pins_a { - allwinner,pull = ; + bias-pull-up; }; &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins_a>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_aldo1>; mmc-pwrseq = <&mmc2_pwrseq>; bus-width = <4>; non-removable; status = "okay"; - brcmf: bcrmf@1 { + brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&r_pio>; @@ -144,45 +147,148 @@ }; &mmc2_pins_a { - allwinner,pull = ; + bias-pull-up; }; &ohci0 { status = "okay"; }; +&p2wi { + status = "okay"; + + axp22x: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x68>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + x-powers,drive-vbus-en; + }; +}; + &pio { gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 { - allwinner,pins = "PA21"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PA21"; + function = "gpio_out"; }; led_pins_bpi_m2: led_pins@0 { - allwinner,pins = "PG5", "PG10", "PG11"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PG5", "PG10", "PG11"; + function = "gpio_out"; }; mmc0_cd_pin_bpi_m2: mmc0_cd_pin@0 { - allwinner,pins = "PA4"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PA4"; + function = "gpio_in"; + bias-pull-up; }; }; &r_pio { mmc2_pwrseq_pin_bpi_m2: mmc2_pwrseq_pin@0 { - allwinner,pins = "PL8"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PL8"; + function = "gpio_out"; }; }; +#include "axp22x.dtsi" + +®_aldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-gmac"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vdd-3v0"; +}; + +®_dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc4 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-sys-dll"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-mac"; +}; + +®_dldo2 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "avdd-csi"; +}; + +®_dldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pb"; +}; + +®_eldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vdd-csi"; + status = "okay"; +}; + +®_ldo_io1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pm-cpus"; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts index d6ad6196a7..aab6c1720e 100644 --- a/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts +++ b/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts @@ -45,7 +45,6 @@ #include "sunxi-common-regulators.dtsi" #include -#include / { model = "Yones TopTech BS1078 v2 Tablet"; @@ -92,10 +91,9 @@ &pio { mmc0_cd_pin_bs1078v2: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PA8"; + function = "gpio_in"; + bias-pull-up; }; }; @@ -104,13 +102,12 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bs1078v2>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; - cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ - cd-inverted; + cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ status = "okay"; }; &mmc0_pins_a { - allwinner,pull = ; + bias-pull-up; }; &p2wi { diff --git a/arch/arm/dts/sun6i-a31s.dtsi b/arch/arm/dts/sun6i-a31s.dtsi index c17a32771b..97e2c51d0a 100644 --- a/arch/arm/dts/sun6i-a31s.dtsi +++ b/arch/arm/dts/sun6i-a31s.dtsi @@ -48,6 +48,14 @@ #include "sun6i-a31.dtsi" +&de { + compatible = "allwinner,sun6i-a31s-display-engine"; +}; + &pio { compatible = "allwinner,sun6i-a31s-pinctrl"; }; + +&tcon0 { + compatible = "allwinner,sun6i-a31s-tcon"; +}; diff --git a/arch/arm/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/dts/sun6i-reference-design-tablet.dtsi index 0c434304e0..4e72e4f3ef 100644 --- a/arch/arm/dts/sun6i-reference-design-tablet.dtsi +++ b/arch/arm/dts/sun6i-reference-design-tablet.dtsi @@ -44,7 +44,6 @@ #include #include -#include / { aliases { @@ -70,24 +69,21 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>; vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ - cd-inverted; + cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ status = "okay"; }; &pio { mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PA8"; + function = "gpio_in"; + bias-pull-up; }; usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PA15"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + pins = "PA15"; + function = "gpio_in"; + bias-pull-up; }; }; diff --git a/include/dt-bindings/clock/sun6i-a31-ccu.h b/include/dt-bindings/clock/sun6i-a31-ccu.h new file mode 100644 index 0000000000..c5d1334018 --- /dev/null +++ b/include/dt-bindings/clock/sun6i-a31-ccu.h @@ -0,0 +1,191 @@ +/* + * Copyright (C) 2016 Chen-Yu Tsai + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_CLK_SUN6I_A31_H_ +#define _DT_BINDINGS_CLK_SUN6I_A31_H_ + +#define CLK_PLL_VIDEO0_2X 7 + +#define CLK_PLL_PERIPH 10 + +#define CLK_PLL_VIDEO1_2X 13 + +#define CLK_CPU 18 + +#define CLK_AHB1_MIPIDSI 23 +#define CLK_AHB1_SS 24 +#define CLK_AHB1_DMA 25 +#define CLK_AHB1_MMC0 26 +#define CLK_AHB1_MMC1 27 +#define CLK_AHB1_MMC2 28 +#define CLK_AHB1_MMC3 29 +#define CLK_AHB1_NAND1 30 +#define CLK_AHB1_NAND0 31 +#define CLK_AHB1_SDRAM 32 +#define CLK_AHB1_EMAC 33 +#define CLK_AHB1_TS 34 +#define CLK_AHB1_HSTIMER 35 +#define CLK_AHB1_SPI0 36 +#define CLK_AHB1_SPI1 37 +#define CLK_AHB1_SPI2 38 +#define CLK_AHB1_SPI3 39 +#define CLK_AHB1_OTG 40 +#define CLK_AHB1_EHCI0 41 +#define CLK_AHB1_EHCI1 42 +#define CLK_AHB1_OHCI0 43 +#define CLK_AHB1_OHCI1 44 +#define CLK_AHB1_OHCI2 45 +#define CLK_AHB1_VE 46 +#define CLK_AHB1_LCD0 47 +#define CLK_AHB1_LCD1 48 +#define CLK_AHB1_CSI 49 +#define CLK_AHB1_HDMI 50 +#define CLK_AHB1_BE0 51 +#define CLK_AHB1_BE1 52 +#define CLK_AHB1_FE0 53 +#define CLK_AHB1_FE1 54 +#define CLK_AHB1_MP 55 +#define CLK_AHB1_GPU 56 +#define CLK_AHB1_DEU0 57 +#define CLK_AHB1_DEU1 58 +#define CLK_AHB1_DRC0 59 +#define CLK_AHB1_DRC1 60 + +#define CLK_APB1_CODEC 61 +#define CLK_APB1_SPDIF 62 +#define CLK_APB1_DIGITAL_MIC 63 +#define CLK_APB1_PIO 64 +#define CLK_APB1_DAUDIO0 65 +#define CLK_APB1_DAUDIO1 66 + +#define CLK_APB2_I2C0 67 +#define CLK_APB2_I2C1 68 +#define CLK_APB2_I2C2 69 +#define CLK_APB2_I2C3 70 +#define CLK_APB2_UART0 71 +#define CLK_APB2_UART1 72 +#define CLK_APB2_UART2 73 +#define CLK_APB2_UART3 74 +#define CLK_APB2_UART4 75 +#define CLK_APB2_UART5 76 + +#define CLK_NAND0 77 +#define CLK_NAND1 78 +#define CLK_MMC0 79 +#define CLK_MMC0_SAMPLE 80 +#define CLK_MMC0_OUTPUT 81 +#define CLK_MMC1 82 +#define CLK_MMC1_SAMPLE 83 +#define CLK_MMC1_OUTPUT 84 +#define CLK_MMC2 85 +#define CLK_MMC2_SAMPLE 86 +#define CLK_MMC2_OUTPUT 87 +#define CLK_MMC3 88 +#define CLK_MMC3_SAMPLE 89 +#define CLK_MMC3_OUTPUT 90 +#define CLK_TS 91 +#define CLK_SS 92 +#define CLK_SPI0 93 +#define CLK_SPI1 94 +#define CLK_SPI2 95 +#define CLK_SPI3 96 +#define CLK_DAUDIO0 97 +#define CLK_DAUDIO1 98 +#define CLK_SPDIF 99 +#define CLK_USB_PHY0 100 +#define CLK_USB_PHY1 101 +#define CLK_USB_PHY2 102 +#define CLK_USB_OHCI0 103 +#define CLK_USB_OHCI1 104 +#define CLK_USB_OHCI2 105 + +#define CLK_DRAM_VE 110 +#define CLK_DRAM_CSI_ISP 111 +#define CLK_DRAM_TS 112 +#define CLK_DRAM_DRC0 113 +#define CLK_DRAM_DRC1 114 +#define CLK_DRAM_DEU0 115 +#define CLK_DRAM_DEU1 116 +#define CLK_DRAM_FE0 117 +#define CLK_DRAM_FE1 118 +#define CLK_DRAM_BE0 119 +#define CLK_DRAM_BE1 120 +#define CLK_DRAM_MP 121 + +#define CLK_BE0 122 +#define CLK_BE1 123 +#define CLK_FE0 124 +#define CLK_FE1 125 +#define CLK_MP 126 +#define CLK_LCD0_CH0 127 +#define CLK_LCD1_CH0 128 +#define CLK_LCD0_CH1 129 +#define CLK_LCD1_CH1 130 +#define CLK_CSI0_SCLK 131 +#define CLK_CSI0_MCLK 132 +#define CLK_CSI1_MCLK 133 +#define CLK_VE 134 +#define CLK_CODEC 135 +#define CLK_AVS 136 +#define CLK_DIGITAL_MIC 137 +#define CLK_HDMI 138 +#define CLK_HDMI_DDC 139 +#define CLK_PS 140 + +#define CLK_MIPI_DSI 143 +#define CLK_MIPI_DSI_DPHY 144 +#define CLK_MIPI_CSI_DPHY 145 +#define CLK_IEP_DRC0 146 +#define CLK_IEP_DRC1 147 +#define CLK_IEP_DEU0 148 +#define CLK_IEP_DEU1 149 +#define CLK_GPU_CORE 150 +#define CLK_GPU_MEMORY 151 +#define CLK_GPU_HYD 152 +#define CLK_ATS 153 +#define CLK_TRACE 154 + +#define CLK_OUT_A 155 +#define CLK_OUT_B 156 +#define CLK_OUT_C 157 + +#endif /* _DT_BINDINGS_CLK_SUN6I_A31_H_ */ diff --git a/include/dt-bindings/reset/sun6i-a31-ccu.h b/include/dt-bindings/reset/sun6i-a31-ccu.h new file mode 100644 index 0000000000..fbff365ed6 --- /dev/null +++ b/include/dt-bindings/reset/sun6i-a31-ccu.h @@ -0,0 +1,106 @@ +/* + * Copyright (C) 2016 Chen-Yu Tsai + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_RST_SUN6I_A31_H_ +#define _DT_BINDINGS_RST_SUN6I_A31_H_ + +#define RST_USB_PHY0 0 +#define RST_USB_PHY1 1 +#define RST_USB_PHY2 2 + +#define RST_AHB1_MIPI_DSI 3 +#define RST_AHB1_SS 4 +#define RST_AHB1_DMA 5 +#define RST_AHB1_MMC0 6 +#define RST_AHB1_MMC1 7 +#define RST_AHB1_MMC2 8 +#define RST_AHB1_MMC3 9 +#define RST_AHB1_NAND1 10 +#define RST_AHB1_NAND0 11 +#define RST_AHB1_SDRAM 12 +#define RST_AHB1_EMAC 13 +#define RST_AHB1_TS 14 +#define RST_AHB1_HSTIMER 15 +#define RST_AHB1_SPI0 16 +#define RST_AHB1_SPI1 17 +#define RST_AHB1_SPI2 18 +#define RST_AHB1_SPI3 19 +#define RST_AHB1_OTG 20 +#define RST_AHB1_EHCI0 21 +#define RST_AHB1_EHCI1 22 +#define RST_AHB1_OHCI0 23 +#define RST_AHB1_OHCI1 24 +#define RST_AHB1_OHCI2 25 +#define RST_AHB1_VE 26 +#define RST_AHB1_LCD0 27 +#define RST_AHB1_LCD1 28 +#define RST_AHB1_CSI 29 +#define RST_AHB1_HDMI 30 +#define RST_AHB1_BE0 31 +#define RST_AHB1_BE1 32 +#define RST_AHB1_FE0 33 +#define RST_AHB1_FE1 34 +#define RST_AHB1_MP 35 +#define RST_AHB1_GPU 36 +#define RST_AHB1_DEU0 37 +#define RST_AHB1_DEU1 38 +#define RST_AHB1_DRC0 39 +#define RST_AHB1_DRC1 40 +#define RST_AHB1_LVDS 41 + +#define RST_APB1_CODEC 42 +#define RST_APB1_SPDIF 43 +#define RST_APB1_DIGITAL_MIC 44 +#define RST_APB1_DAUDIO0 45 +#define RST_APB1_DAUDIO1 46 +#define RST_APB2_I2C0 47 +#define RST_APB2_I2C1 48 +#define RST_APB2_I2C2 49 +#define RST_APB2_I2C3 50 +#define RST_APB2_UART0 51 +#define RST_APB2_UART1 52 +#define RST_APB2_UART2 53 +#define RST_APB2_UART3 54 +#define RST_APB2_UART4 55 +#define RST_APB2_UART5 56 + +#endif /* _DT_BINDINGS_RST_SUN6I_A31_H_ */