From: Gabor Juhos Date: Mon, 13 Aug 2007 15:47:50 +0000 (+0000) Subject: cleanup patch of the USB driver X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=d0edc434ab65961c24726da838e1f5d588558eac;p=librecmc%2Flibrecmc.git cleanup patch of the USB driver SVN-Revision: 8408 --- diff --git a/target/linux/adm5120-2.6/patches-2.6.22/005-adm5120_usb.patch b/target/linux/adm5120-2.6/patches-2.6.22/005-adm5120_usb.patch index 73f326eb73..9b2272ae0d 100644 --- a/target/linux/adm5120-2.6/patches-2.6.22/005-adm5120_usb.patch +++ b/target/linux/adm5120-2.6/patches-2.6.22/005-adm5120_usb.patch @@ -2,15 +2,6 @@ Index: linux-2.6.22.1/drivers/usb/core/hub.c =================================================================== --- linux-2.6.22.1.orig/drivers/usb/core/hub.c +++ linux-2.6.22.1/drivers/usb/core/hub.c -@@ -464,7 +464,7 @@ void usb_hub_tt_clear_buffer (struct usb - : (USB_ENDPOINT_XFER_BULK << 11); - if (usb_pipein (pipe)) - clear->devinfo |= 1 << 15; -- -+ - /* tell keventd to clear state for this TT */ - spin_lock_irqsave (&tt->lock, flags); - list_add_tail (&clear->clear_list, &tt->clear_list); @@ -540,7 +540,7 @@ static int hub_hub_status(struct usb_hub "%s failed (err = %d)\n", __FUNCTION__, ret); else { @@ -29,42 +20,6 @@ Index: linux-2.6.22.1/drivers/usb/core/hub.c ret = 0; } mutex_unlock(&hub->status_mutex); -@@ -2007,7 +2007,7 @@ static inline int remote_wakeup(struct u - * Between connect detection and reset signaling there must be a delay - * of 100ms at least for debounce and power-settling. The corresponding - * timer shall restart whenever the downstream port detects a disconnect. -- * -+ * - * Apparently there are some bluetooth and irda-dongles and a number of - * low-speed devices for which this debounce period may last over a second. - * Not covered by the spec - but easy to deal with. -@@ -2142,7 +2142,7 @@ hub_port_init (struct usb_hub *hub, stru - goto fail; - } - oldspeed = udev->speed; -- -+ - /* USB 2.0 section 5.5.3 talks about ep0 maxpacket ... - * it's fixed size except for full speed devices. - * For Wireless USB devices, ep0 max packet is always 512 (tho -@@ -2168,7 +2168,7 @@ hub_port_init (struct usb_hub *hub, stru - default: - goto fail; - } -- -+ - type = ""; - switch (udev->speed) { - case USB_SPEED_LOW: speed = "low"; break; -@@ -2194,7 +2194,7 @@ hub_port_init (struct usb_hub *hub, stru - udev->tt = &hub->tt; - udev->ttport = port1; - } -- -+ - /* Why interleave GET_DESCRIPTOR and SET_ADDRESS this way? - * Because device hardware and firmware is sometimes buggy in - * this area, and this is how Linux has done it for ages. @@ -2230,6 +2230,8 @@ hub_port_init (struct usb_hub *hub, stru USB_DT_DEVICE << 8, 0, buf, GET_DESCRIPTOR_BUFSIZE, @@ -74,114 +29,6 @@ Index: linux-2.6.22.1/drivers/usb/core/hub.c switch (buf->bMaxPacketSize0) { case 8: case 16: case 32: case 64: case 255: if (buf->bDescriptorType == -@@ -2281,7 +2283,7 @@ hub_port_init (struct usb_hub *hub, stru - udev->devnum, retval); - goto fail; - } -- -+ - /* cope with hardware quirkiness: - * - let SET_ADDRESS settle, some device hardware wants it - * - read ep0 maxpacket even for high and low speed, -@@ -2318,7 +2320,7 @@ hub_port_init (struct usb_hub *hub, stru - udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i); - ep0_reinit(udev); - } -- -+ - retval = usb_get_device_descriptor(udev, USB_DT_DEVICE_SIZE); - if (retval < (signed)sizeof(udev->descriptor)) { - dev_err(&udev->dev, "device descriptor read/%s, error %d\n", -@@ -2416,7 +2418,7 @@ static void hub_port_connect_change(stru - struct device *hub_dev = hub->intfdev; - u16 wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics); - int status, i; -- -+ - dev_dbg (hub_dev, - "port %d, status %04x, change %04x, %s\n", - port1, portstatus, portchange, portspeed (portstatus)); -@@ -2425,7 +2427,7 @@ static void hub_port_connect_change(stru - set_port_led(hub, port1, HUB_LED_AUTO); - hub->indicator[port1-1] = INDICATOR_AUTO; - } -- -+ - /* Disconnect any existing devices under this port */ - if (hdev->children[port1-1]) - usb_disconnect(&hdev->children[port1-1]); -@@ -2455,7 +2457,7 @@ static void hub_port_connect_change(stru - if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2 - && !(portstatus & (1 << USB_PORT_FEAT_POWER))) - set_port_feature(hdev, port1, USB_PORT_FEAT_POWER); -- -+ - if (portstatus & USB_PORT_STAT_ENABLE) - goto done; - return; -@@ -2535,7 +2537,7 @@ static void hub_port_connect_change(stru - goto loop_disable; - } - } -- -+ - /* check for devices running slower than they could */ - if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0200 - && udev->speed == USB_SPEED_FULL -@@ -2587,7 +2589,7 @@ loop: - if (status == -ENOTCONN) - break; - } -- -+ - done: - hub_port_disable(hub, port1, 1); - } -@@ -2720,7 +2722,7 @@ static void hub_events(void) - * EM interference sometimes causes badly - * shielded USB devices to be shutdown by - * the hub, this hack enables them again. -- * Works at least with mouse driver. -+ * Works at least with mouse driver. - */ - if (!(portstatus & USB_PORT_STAT_ENABLE) - && !connect_change -@@ -2750,7 +2752,7 @@ static void hub_events(void) - "resume on port %d, status %d\n", - i, ret); - } -- -+ - if (portchange & USB_PORT_STAT_C_OVERCURRENT) { - dev_err (hub_dev, - "over-current change on port %d\n", -@@ -2985,7 +2987,7 @@ int usb_reset_device(struct usb_device * - - if (ret < 0) - goto re_enumerate; -- -+ - /* Device might have changed firmware (DFU or similar) */ - if (memcmp(&udev->descriptor, &descriptor, sizeof descriptor) - || config_descriptors_changed (udev)) { -@@ -2993,7 +2995,7 @@ int usb_reset_device(struct usb_device * - udev->descriptor = descriptor; /* for disconnect() calls */ - goto re_enumerate; - } -- -+ - if (!udev->actconfig) - goto done; - -@@ -3031,7 +3033,7 @@ int usb_reset_device(struct usb_device * - - done: - return 0; -- -+ - re_enumerate: - hub_port_logical_disconnect(parent_hub, port1); - return -ENODEV; Index: linux-2.6.22.1/drivers/usb/host/Kconfig =================================================================== --- linux-2.6.22.1.orig/drivers/usb/host/Kconfig @@ -205,19 +52,6 @@ Index: linux-2.6.22.1/drivers/usb/host/Makefile obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o -Index: linux-2.6.22.1/drivers/usb/Kconfig -=================================================================== ---- linux-2.6.22.1.orig/drivers/usb/Kconfig -+++ linux-2.6.22.1/drivers/usb/Kconfig -@@ -88,8 +88,6 @@ source "drivers/usb/storage/Kconfig" - - source "drivers/usb/image/Kconfig" - --source "drivers/usb/mon/Kconfig" -- - comment "USB port drivers" - depends on USB - Index: linux-2.6.22.1/drivers/usb/Makefile =================================================================== --- linux-2.6.22.1.orig/drivers/usb/Makefile