From: Simon Glass <sjg@chromium.org>
Date: Mon, 1 Oct 2018 18:22:39 +0000 (-0600)
Subject: cros_ec: Add support for v3 messages on LPC
X-Git-Tag: v2018.11-rc2~7^2~10
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=d07b6e145ec2f0e77aab0fbe15dfd87f40170a8c;p=oweals%2Fu-boot.git

cros_ec: Add support for v3 messages on LPC

At present version 3 messages are only supported on SPI. Add support for
using LPC as well, as used on samus.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

diff --git a/drivers/misc/cros_ec_lpc.c b/drivers/misc/cros_ec_lpc.c
index be17adcc5a..71d03bfba2 100644
--- a/drivers/misc/cros_ec_lpc.c
+++ b/drivers/misc/cros_ec_lpc.c
@@ -40,6 +40,38 @@ static int wait_for_sync(struct cros_ec_dev *dev)
 	return 0;
 }
 
+int cros_ec_lpc_packet(struct udevice *udev, int out_bytes, int in_bytes)
+{
+	struct cros_ec_dev *dev = dev_get_uclass_priv(udev);
+	uint8_t *d;
+	int i;
+
+	if (out_bytes > EC_LPC_HOST_PACKET_SIZE)
+		return log_msg_ret("Cannot send that many bytes\n", -E2BIG);
+
+	if (in_bytes > EC_LPC_HOST_PACKET_SIZE)
+		return log_msg_ret("Cannot receive that many bytes\n", -E2BIG);
+
+	if (wait_for_sync(dev))
+		return log_msg_ret("Timeout waiting ready\n", -ETIMEDOUT);
+
+	/* Write data */
+	for (i = 0, d = (uint8_t *)dev->dout; i < out_bytes; i++, d++)
+		outb(*d, EC_LPC_ADDR_HOST_PACKET + i);
+
+	/* Start the command */
+	outb(EC_COMMAND_PROTOCOL_3, EC_LPC_ADDR_HOST_CMD);
+
+	if (wait_for_sync(dev))
+		return log_msg_ret("Timeout waiting ready\n", -ETIMEDOUT);
+
+	/* Read back args */
+	for (i = 0, d = dev->din; i < in_bytes; i++, d++)
+		*d = inb(EC_LPC_ADDR_HOST_PACKET + i);
+
+	return in_bytes;
+}
+
 int cros_ec_lpc_command(struct udevice *udev, uint8_t cmd, int cmd_version,
 		     const uint8_t *dout, int dout_len,
 		     uint8_t **dinp, int din_len)
@@ -200,6 +232,7 @@ static int cros_ec_probe(struct udevice *dev)
 }
 
 static struct dm_cros_ec_ops cros_ec_ops = {
+	.packet = cros_ec_lpc_packet,
 	.command = cros_ec_lpc_command,
 	.check_version = cros_ec_lpc_check_version,
 };