From: Michal Simek Date: Sun, 11 Mar 2007 12:48:24 +0000 (+0100) Subject: [Microblaze][PATCH] part 2 X-Git-Tag: v1.3.0-rc1~121^2~4 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=cfc67116a706fd18b8f6a9c11a16753c5626d689;p=oweals%2Fu-boot.git [Microblaze][PATCH] part 2 timer support interrupt controller support flash support ethernet support cache support board information support env support booting image support adding support for Xilinx ML401 --- diff --git a/MAKEALL b/MAKEALL index 8431b3ea53..172f3e50a3 100755 --- a/MAKEALL +++ b/MAKEALL @@ -292,7 +292,7 @@ LIST_nios2=" \ ######################################################################### LIST_microblaze=" \ - suzaku + suzaku ml401 " ######################################################################### diff --git a/Makefile b/Makefile index 358d1817c9..f67eb26f80 100644 --- a/Makefile +++ b/Makefile @@ -2304,6 +2304,11 @@ suzaku_config: unconfig @echo "#define CONFIG_SUZAKU 1" >> $(obj)include/config.h @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno +ml401_config: unconfig + @ >include/config.h + @echo "#define CONFIG_ML401 1" >> include/config.h + @./mkconfig -a $(@:_config=) microblaze microblaze ml401 xilinx + ######################################################################### ## Blackfin ######################################################################### @@ -2381,3 +2386,4 @@ backup: gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F ######################################################################### + diff --git a/board/AtmarkTechno/suzaku/u-boot.lds b/board/AtmarkTechno/suzaku/u-boot.lds index 00a8ef7ad9..93147fc6e9 100644 --- a/board/AtmarkTechno/suzaku/u-boot.lds +++ b/board/AtmarkTechno/suzaku/u-boot.lds @@ -61,6 +61,6 @@ SECTIONS { __bss_start = .; *(.bss) - __bss_start = .; + __bss_end = .; } } diff --git a/board/xilinx/xilinx_enet/emac_adapter.c b/board/xilinx/xilinx_enet/emac_adapter.c index f159cb6e39..de62695e5e 100644 --- a/board/xilinx/xilinx_enet/emac_adapter.c +++ b/board/xilinx/xilinx_enet/emac_adapter.c @@ -147,7 +147,11 @@ eth_rx(void) RecvFrameLength = PKTSIZE; Result = XEmac_PollRecv(&Emac, (u8 *) etherrxbuff, &RecvFrameLength); if (Result == XST_SUCCESS) { +#ifndef CONFIG_MICROBLAZE NetReceive((uchar *)etherrxbuff, RecvFrameLength); +#else + NetReceive(etherrxbuff, RecvFrameLength); +#endif return (1); } else { return (0); diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index 70de795dee..d97c09e88e 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -180,6 +180,32 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return 0; } +#elif defined(CONFIG_MICROBLAZE) /* ! PPC, which leaves Microblaze */ + +int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int i; + bd_t *bd = gd->bd; + print_num ("mem start ", (ulong)bd->bi_memstart); + print_num ("mem size ", (ulong)bd->bi_memsize); + print_num ("flash start ", (ulong)bd->bi_flashstart); + print_num ("flash size ", (ulong)bd->bi_flashsize); + print_num ("flash offset ", (ulong)bd->bi_flashoffset); +#if defined(CFG_SRAM_BASE) + print_num ("sram start ", (ulong)bd->bi_sramstart); + print_num ("sram size ", (ulong)bd->bi_sramsize); +#endif +#if defined(CFG_CMD_NET) + puts ("ethaddr ="); + for (i=0; i<6; ++i) { + printf ("%c%02X", i ? ':' : ' ', bd->bi_enetaddr[i]); + } + puts ("\nip_addr = "); + print_IPaddr (bd->bi_ip_addr); +#endif + printf ("\nbaudrate = %d bps\n", (ulong)bd->bi_baudrate); + return 0; +} #else /* ! PPC, which leaves MIPS */ diff --git a/common/env_common.c b/common/env_common.c index eb33422af4..6e193cf051 100644 --- a/common/env_common.c +++ b/common/env_common.c @@ -222,6 +222,14 @@ void env_relocate (void) DEBUGF ("%s[%d] malloced ENV at %p\n", __FUNCTION__,__LINE__,env_ptr); #endif +#ifdef CONFIG_MICROBLAZE + /* + * FIXME MALLOC error for Microblaze - error malloc return + * bad value. Correct value is CFG_MONITOR_BASE - CFG_MALLOC_LEN. + */ + env_ptr = (env_t *)CFG_MONITOR_BASE; + DEBUGF ("%s[%d] malloced ENV at %p\n", __FUNCTION__,__LINE__,env_ptr); +#endif /* * After relocation to RAM, we can always use the "memory" functions */ diff --git a/cpu/microblaze/Makefile b/cpu/microblaze/Makefile index fd544254f0..db1afa553d 100644 --- a/cpu/microblaze/Makefile +++ b/cpu/microblaze/Makefile @@ -26,7 +26,8 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a START = start.o -COBJS = cpu.o interrupts.o +SOBJS = dcache.o icache.o irq.o disable_int.o enable_int.o +COBJS = cpu.o interrupts.o cache.o exception.o timer.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/cpu/microblaze/interrupts.c b/cpu/microblaze/interrupts.c index ccf67e1721..37ed16dfe1 100644 --- a/cpu/microblaze/interrupts.c +++ b/cpu/microblaze/interrupts.c @@ -1,6 +1,8 @@ /* + * (C) Copyright 2007 Michal Simek * (C) Copyright 2004 Atmark Techno, Inc. * + * Michal SIMEK * Yasushi SHOJI * * See file CREDITS for list of people who contributed to this @@ -13,7 +15,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -22,11 +24,185 @@ * MA 02111-1307 USA */ -void enable_interrupts(void) +#include +#include +#include + +#undef DEBUG_INT + +extern void microblaze_disable_interrupts (void); +extern void microblaze_enable_interrupts (void); + +void enable_interrupts (void) { + microblaze_enable_interrupts (); } -int disable_interrupts(void) +int disable_interrupts (void) { + microblaze_disable_interrupts (); return 0; } + +#ifdef CFG_INTC_0 +#ifdef CFG_TIMER_0 +extern void timer_init (void); +#endif + +static struct irq_action vecs[CFG_INTC_0_NUM]; + +/* mapping structure to interrupt controller */ +microblaze_intc_t *intc = (microblaze_intc_t *) (CFG_INTC_0_ADDR); + +/* default handler */ +void def_hdlr (void) +{ + puts ("def_hdlr\n"); +} + +void enable_one_interrupt (int irq) +{ + int mask; + int offset = 1; + offset <<= irq; + mask = intc->ier; + intc->ier = (mask | offset); +#ifdef DEBUG_INT + printf ("Enable one interrupt irq %x - mask %x,ier %x\n", offset, mask, + intc->ier); + printf ("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier, + intc->iar, intc->mer); +#endif +} + +void disable_one_interrupt (int irq) +{ + int mask; + int offset = 1; + offset <<= irq; + mask = intc->ier; + intc->ier = (mask & ~offset); +#ifdef DEBUG_INT + printf ("Disable one interrupt irq %x - mask %x,ier %x\n", irq, mask, + intc->ier); + printf ("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier, + intc->iar, intc->mer); +#endif +} + +/* adding new handler for interrupt */ +void install_interrupt_handler (int irq, interrupt_handler_t * hdlr, void *arg) +{ + struct irq_action *act; + /* irq out of range */ + if ((irq < 0) || (irq > CONFIG_XILINX_INTC_0_NUM_INTR_INPUTS)) { + puts ("IRQ out of range\n"); + return; + } + act = &vecs[irq]; + if (hdlr) { /* enable */ + act->handler = hdlr; + act->arg = arg; + act->count = 0; + enable_one_interrupt (irq); + } else { /* disable */ + + act->handler = (interrupt_handler_t *) def_hdlr; + act->arg = (void *)irq; + disable_one_interrupt (irq); + } +} + +/* initialization interrupt controller - hardware */ +void intc_init (void) +{ + intc->mer = 0; + intc->ier = 0; + intc->iar = 0xFFFFFFFF; + /* XIntc_Start - hw_interrupt enable and all interrupt enable */ + intc->mer = 0x3; +#ifdef DEBUG_INT + printf ("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier, + intc->iar, intc->mer); +#endif +} + +int interrupts_init (void) +{ + int i; + /* initialize irq list */ + for (i = 0; i < CONFIG_XILINX_INTC_0_NUM_INTR_INPUTS; i++) { + vecs[i].handler = (interrupt_handler_t *) def_hdlr; + vecs[i].arg = (void *)i; + vecs[i].count = 0; + } + /* initialize intc controller */ + intc_init (); +#ifdef CFG_TIMER_0 + timer_init (); +#endif + enable_interrupts (); + return 0; +} + +void interrupt_handler (void) +{ + int irqs; + irqs = (intc->isr & intc->ier); /* find active interrupt */ + +#ifdef DEBUG_INT + printf ("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier, + intc->iar, intc->mer); + printf ("Interrupt handler on %x line, r14 %x\n", irqs, value); +#endif + struct irq_action *act = vecs; + while (irqs) { + if (irqs & 1) { +#ifdef DEBUG_INT + printf + ("Jumping to interrupt handler rutine addr %x,count %x,arg %x\n", + act->handler, act->count, act->arg); +#endif + act->handler (act->arg); + act->count++; + } + irqs >>= 1; + act++; + } + intc->iar = 0xFFFFFFFF; /* erase all events */ +#ifdef DEBUG + printf ("Dump INTC reg, isr %x, ier %x, iar %x, mer %x\n", intc->isr, + intc->ier, intc->iar, intc->mer); + printf ("Interrupt handler on %x line, r14\n", irqs); +#endif +} +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_IRQ) +#ifdef CFG_INTC_0 +int do_irqinfo (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + int i; + struct irq_action *act = vecs; + + puts ("\nInterrupt-Information:\n\n" + "Nr Routine Arg Count\n" + "-----------------------------\n"); + + for (i = 0; i < CONFIG_XILINX_INTC_0_NUM_INTR_INPUTS; i++) { + if (act->handler != (interrupt_handler_t*) def_hdlr) { + printf ("%02d %08lx %08lx %d\n", i, + (int)act->handler, (int)act->arg, act->count); + } + act++; + } + puts ("\n"); + return (0); +} +#else +int do_irqinfo (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + puts ("Undefined interrupt controller\n"); +} +#endif +#endif /* CONFIG_COMMANDS & CFG_CMD_IRQ */ diff --git a/cpu/microblaze/start.S b/cpu/microblaze/start.S index 7efdbb0970..bce32978fd 100644 --- a/cpu/microblaze/start.S +++ b/cpu/microblaze/start.S @@ -1,6 +1,8 @@ /* + * (C) Copyright 2007 Michal Simek * (C) Copyright 2004 Atmark Techno, Inc. * + * Michal SIMEK * Yasushi SHOJI * * See file CREDITS for list of people who contributed to this @@ -13,7 +15,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -27,10 +29,62 @@ .text .global _start _start: + mts rmsr, r0 /* disable cache */ + addi r1, r0, CFG_INIT_SP_OFFSET + /* add opcode instruction for 32bit jump - 2 instruction imm & brai*/ + addi r6, r0, 0xb000 /* hex b000 opcode imm */ + bslli r6, r6, 16 /* shift */ + swi r6, r0, 0x0 /* reset address */ + swi r6, r0, 0x8 /* user vector exception */ + swi r6, r0, 0x10 /* interrupt */ + swi r6, r0, 0x20 /* hardware exception */ - addi r1, r0, CFG_SDRAM_BASE /* init stack pointer */ - addi r1, r1, CFG_SDRAM_SIZE /* set sp to high up */ + addi r6, r0, 0xb808 /* hew b808 opcode brai*/ + bslli r6, r6, 16 + swi r6, r0, 0x4 /* reset address */ + swi r6, r0, 0xC /* user vector exception */ + swi r6, r0, 0x14 /* interrupt */ + swi r6, r0, 0x24 /* hardware exception */ - brai board_init +#ifdef CFG_RESET_ADDRESS + /* reset address */ + addik r6, r0, CFG_RESET_ADDRESS + sw r6, r1, r0 + lhu r7, r1, r0 + shi r7, r0, 0x2 + shi r6, r0, 0x6 +#endif + +#ifdef CFG_USR_EXCEP + /* user_vector_exception */ + addik r6, r0, _exception_handler + sw r6, r1, r0 + lhu r7, r1, r0 + shi r7, r0, 0xa + shi r6, r0, 0xe +#endif + +#ifdef CFG_INTC_0 + /* interrupt_handler */ + addik r6, r0, _interrupt_handler + sw r6, r1, r0 + lhu r7, r1, r0 + shi r7, r0, 0x12 + shi r6, r0, 0x16 +#endif + /* hardware exception */ + addik r6, r0, _hw_exception_handler + sw r6, r1, r0 + lhu r7, r1, r0 + shi r7, r0, 0x22 + shi r6, r0, 0x26 + + /* enable instruction and data cache */ + mfs r12, rmsr + ori r12, r12, 0xa0 + mts rmsr, r12 + + /* jumping to board_init */ + brai board_init 1: bri 1b diff --git a/lib_microblaze/board.c b/lib_microblaze/board.c index 026d247e54..273d9c441f 100644 --- a/lib_microblaze/board.c +++ b/lib_microblaze/board.c @@ -1,6 +1,8 @@ /* + * (C) Copyright 2007 Michal Simek * (C) Copyright 2004 Atmark Techno, Inc. * + * Michal SIMEK * Yasushi SHOJI * * See file CREDITS for list of people who contributed to this @@ -13,7 +15,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -30,8 +32,18 @@ DECLARE_GLOBAL_DATA_PTR; -const char version_string[] = - U_BOOT_VERSION" (" __DATE__ " - " __TIME__ ")"; +const char version_string[] = U_BOOT_VERSION " (" __DATE__ " - " __TIME__ ")"; + +#ifdef CFG_GPIO_0 +extern int gpio_init (void); +#endif +#ifdef CFG_INTC_0 +extern int interrupts_init (void); +#endif +#if (CONFIG_COMMANDS & CFG_CMD_NET) +extern int eth_init (bd_t * bis); +extern int getenv_IPaddr (char *); +#endif /* * Begin and End of memory area for malloc(), and current "brk" @@ -40,6 +52,18 @@ static ulong mem_malloc_start; static ulong mem_malloc_end; static ulong mem_malloc_brk; +/* + * The Malloc area is immediately below the monitor copy in DRAM + * aka CFG_MONITOR_BASE - Note there is no need for reloc_off + * as our monitory code is run from SDRAM + */ +static void mem_malloc_init (void) +{ + mem_malloc_end = CFG_MONITOR_BASE + CFG_MONITOR_LEN; + mem_malloc_start = CFG_MONITOR_BASE; + mem_malloc_brk = mem_malloc_start; + memset ((void *)mem_malloc_start, 0, mem_malloc_end - mem_malloc_start); +} void *sbrk (ptrdiff_t increment) { @@ -50,7 +74,7 @@ void *sbrk (ptrdiff_t increment) return (NULL); } mem_malloc_brk = new; - return ((void *) old); + return ((void *)old); } /* @@ -68,24 +92,36 @@ void *sbrk (ptrdiff_t increment) typedef int (init_fnc_t) (void); init_fnc_t *init_sequence[] = { - serial_init, /* serial communications setup */ + env_init, + serial_init, +#ifdef CFG_GPIO_0 + gpio_init, +#endif +#ifdef CFG_INTC_0 + interrupts_init, +#endif NULL, }; -void board_init(void) +void board_init (void) { bd_t *bd; init_fnc_t **init_fnc_ptr; - - /* Pointer is writable since we allocated a register for it. */ - gd = (gd_t *)CFG_GBL_DATA_OFFSET; - memset((void *)gd, 0, CFG_GBL_DATA_SIZE); - - gd->bd = (bd_t *)(gd+1); /* At end of global data */ + gd = (gd_t *) CFG_GBL_DATA_OFFSET; +#if (CONFIG_COMMANDS & CFG_CMD_FLASH) + ulong flash_size = 0; +#endif + asm ("nop"); /* FIXME gd is not initialize - wait */ + memset ((void *)gd, 0, CFG_GBL_DATA_SIZE); + gd->bd = (bd_t *) (gd + 1); /* At end of global data */ gd->baudrate = CONFIG_BAUDRATE; - bd = gd->bd; bd->bi_baudrate = CONFIG_BAUDRATE; + bd->bi_memstart = CFG_SDRAM_BASE; + bd->bi_memsize = CFG_SDRAM_SIZE; + + /* Initialise malloc() area */ + mem_malloc_init (); for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { WATCHDOG_RESET (); @@ -94,6 +130,37 @@ void board_init(void) } } +#if (CONFIG_COMMANDS & CFG_CMD_FLASH) + bd->bi_flashstart = CFG_FLASH_BASE; + if (0 < (flash_size = flash_init ())) { + bd->bi_flashsize = flash_size; + bd->bi_flashoffset = CFG_FLASH_BASE + flash_size; + } else { + puts ("Flash init FAILED"); + bd->bi_flashstart = 0; + bd->bi_flashsize = 0; + bd->bi_flashoffset = 0; + } +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_NET) + char *s, *e; + int i; + /* board MAC address */ + s = getenv ("ethaddr"); + for (i = 0; i < 6; ++i) { + bd->bi_enetaddr[i] = s ? simple_strtoul (s, &e, 16) : 0; + if (s) + s = (*e) ? e + 1 : e; + } + /* IP Address */ + bd->bi_ip_addr = getenv_IPaddr ("ipaddr"); + eth_init (bd); +#endif + + /* relocate environment function pointers etc. */ + env_relocate (); + /* main_loop */ for (;;) { WATCHDOG_RESET (); @@ -104,5 +171,5 @@ void board_init(void) void hang (void) { puts ("### ERROR ### Please RESET the board ###\n"); - for (;;); + for (;;) ; } diff --git a/lib_microblaze/microblaze_linux.c b/lib_microblaze/microblaze_linux.c index b3a0815510..2c7885c1f1 100644 --- a/lib_microblaze/microblaze_linux.c +++ b/lib_microblaze/microblaze_linux.c @@ -1,6 +1,8 @@ /* + * (C) Copyright 2007 Michal Simek * (C) Copyright 2004 Atmark Techno, Inc. * + * Michal SIMEK * Yasushi SHOJI * * See file CREDITS for list of people who contributed to this @@ -13,7 +15,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -24,8 +26,146 @@ #include #include +#include +#include +#include -void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[], - ulong addr, ulong *len_ptr, int verify) +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_SHOW_BOOT_PROGRESS +# include +# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) +#else +# define SHOW_BOOT_PROGRESS(arg) +#endif + +extern image_header_t header; /* from cmd_bootm.c */ +/*cmd_boot.c*/ +extern int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]); + +void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], + ulong addr, ulong * len_ptr, int verify) { + ulong len = 0, checksum; + ulong initrd_start, initrd_end; + ulong data; + /* First parameter is mapped to $r5 for kernel boot args */ + void (*theKernel) (char *); + image_header_t *hdr = &header; + char *commandline = getenv ("bootargs"); + int i; + + theKernel = (void (*)(char *))ntohl (hdr->ih_ep); + + /* Check if there is an initrd image */ + if (argc >= 3) { + SHOW_BOOT_PROGRESS (9); + + addr = simple_strtoul (argv[2], NULL, 16); + + printf ("## Loading Ramdisk Image at %08lx ...\n", addr); + + /* Copy header so we can blank CRC field for re-calculation */ + memcpy (&header, (char *)addr, sizeof (image_header_t)); + + if (ntohl (hdr->ih_magic) != IH_MAGIC) { + printf ("Bad Magic Number\n"); + SHOW_BOOT_PROGRESS (-10); + do_reset (cmdtp, flag, argc, argv); + } + + data = (ulong) & header; + len = sizeof (image_header_t); + + checksum = ntohl (hdr->ih_hcrc); + hdr->ih_hcrc = 0; + + if (crc32 (0, (char *)data, len) != checksum) { + printf ("Bad Header Checksum\n"); + SHOW_BOOT_PROGRESS (-11); + do_reset (cmdtp, flag, argc, argv); + } + + SHOW_BOOT_PROGRESS (10); + + print_image_hdr (hdr); + + data = addr + sizeof (image_header_t); + len = ntohl (hdr->ih_size); + + if (verify) { + ulong csum = 0; + + printf (" Verifying Checksum ... "); + csum = crc32 (0, (char *)data, len); + if (csum != ntohl (hdr->ih_dcrc)) { + printf ("Bad Data CRC\n"); + SHOW_BOOT_PROGRESS (-12); + do_reset (cmdtp, flag, argc, argv); + } + printf ("OK\n"); + } + + SHOW_BOOT_PROGRESS (11); + + if ((hdr->ih_os != IH_OS_LINUX) || + (hdr->ih_arch != IH_CPU_MICROBLAZE) || + (hdr->ih_type != IH_TYPE_RAMDISK)) { + printf ("No Linux Microblaze Ramdisk Image\n"); + SHOW_BOOT_PROGRESS (-13); + do_reset (cmdtp, flag, argc, argv); + } + + /* + * Now check if we have a multifile image + */ + } else if ((hdr->ih_type == IH_TYPE_MULTI) && (len_ptr[1])) { + ulong tail = ntohl (len_ptr[0]) % 4; + + SHOW_BOOT_PROGRESS (13); + + /* skip kernel length and terminator */ + data = (ulong) (&len_ptr[2]); + /* skip any additional image length fields */ + for (i = 1; len_ptr[i]; ++i) + data += 4; + /* add kernel length, and align */ + data += ntohl (len_ptr[0]); + if (tail) { + data += 4 - tail; + } + + len = ntohl (len_ptr[1]); + + } else { + /* + * no initrd image + */ + SHOW_BOOT_PROGRESS (14); + + data = 0; + } + +#ifdef DEBUG + if (!data) { + printf ("No initrd\n"); + } +#endif + + if (data) { + initrd_start = data; + initrd_end = initrd_start + len; + } else { + initrd_start = 0; + initrd_end = 0; + } + + SHOW_BOOT_PROGRESS (15); + +#ifdef DEBUG + printf ("## Transferring control to Linux (at address %08lx) ...\n", + (ulong) theKernel); +#endif + + theKernel (commandline); } diff --git a/lib_microblaze/time.c b/lib_microblaze/time.c index 12e84888bd..3fa1b11262 100644 --- a/lib_microblaze/time.c +++ b/lib_microblaze/time.c @@ -1,6 +1,8 @@ /* + * (C) Copyright 2007 Michal Simek * (C) Copyright 2004 Atmark Techno, Inc. * + * Michal SIMEK * Yasushi SHOJI * * See file CREDITS for list of people who contributed to this @@ -22,6 +24,11 @@ * MA 02111-1307 USA */ -void udelay(unsigned long usec) +#include + +void udelay (unsigned long usec) { + int i; + i = get_timer (0); + while ((get_timer (0) - i) < (usec / 1000)) ; } diff --git a/microblaze_config.mk b/microblaze_config.mk index b3ac8e08cf..06ddefa4ce 100644 --- a/microblaze_config.mk +++ b/microblaze_config.mk @@ -22,7 +22,7 @@ # MA 02111-1307 USA # -PLATFORM_CPPFLAGS += -ffixed-r31 +PLATFORM_CPPFLAGS += -ffixed-r31 -D__microblaze__ ifdef CONFIG_MICROBLAZE_HARD_MULT PLATFORM_CPPFLAGS += -mno-xl-soft-mul