From: Simon Glass Date: Mon, 3 Dec 2018 11:37:27 +0000 (-0700) Subject: dm: sound: wm899c: Split out interface setup code X-Git-Tag: v2019.01-rc2~7^2~29 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=cfbe7623d680235308c46a76c38cc3f08df16889;p=oweals%2Fu-boot.git dm: sound: wm899c: Split out interface setup code With driver model we want to do a minimal probe when the device is probed and then set up the codec interface later when a sound is actully played. Split this setup code out into its own function to help with this. Signed-off-by: Simon Glass --- diff --git a/drivers/sound/wm8994.c b/drivers/sound/wm8994.c index f83fcf9f43..20a48231eb 100644 --- a/drivers/sound/wm8994.c +++ b/drivers/sound/wm8994.c @@ -659,8 +659,7 @@ static int wm8994_init_volume_aif1_dac1(struct wm8994_priv *priv) * * @returns -1 for error and 0 Success. */ -static int wm8994_device_init(struct wm8994_priv *priv, - enum en_audio_interface aif_id) +static int wm8994_device_init(struct wm8994_priv *priv) { const char *devname; unsigned short reg_data; @@ -671,7 +670,7 @@ static int wm8994_device_init(struct wm8994_priv *priv, ret = wm8994_i2c_read(priv, WM8994_SOFTWARE_RESET, ®_data); if (ret < 0) { debug("Failed to read ID register\n"); - goto err; + return ret; } if (reg_data == WM8994_ID) { @@ -680,21 +679,28 @@ static int wm8994_device_init(struct wm8994_priv *priv, priv->type = WM8994; } else { debug("Device is not a WM8994, ID is %x\n", ret); - ret = -1; - goto err; + return -ENXIO; } ret = wm8994_i2c_read(priv, WM8994_CHIP_REVISION, ®_data); if (ret < 0) { debug("Failed to read revision register: %d\n", ret); - goto err; + return ret; } priv->revision = reg_data; debug("%s revision %c\n", devname, 'A' + priv->revision); + return 0; +} + +static int wm8994_setup_interface(struct wm8994_priv *priv, + enum en_audio_interface aif_id) +{ + int ret; + /* VMID Selection */ - ret |= wm8994_bic_or(priv, WM8994_POWER_MANAGEMENT_1, - WM8994_VMID_SEL_MASK | WM8994_BIAS_ENA_MASK, 0x3); + ret = wm8994_bic_or(priv, WM8994_POWER_MANAGEMENT_1, + WM8994_VMID_SEL_MASK | WM8994_BIAS_ENA_MASK, 0x3); /* Charge Pump Enable */ ret |= wm8994_bic_or(priv, WM8994_CHARGE_PUMP_1, WM8994_CP_ENA_MASK, @@ -807,10 +813,10 @@ static int wm8994_device_init(struct wm8994_priv *priv, if (ret < 0) goto err; - debug("%s: Codec chip init ok\n", __func__); + debug("%s: Codec chip setup ok\n", __func__); return 0; err: - debug("%s: Codec chip init error\n", __func__); + debug("%s: Codec chip setup error\n", __func__); return -1; } @@ -874,7 +880,7 @@ static int _wm8994_init(struct wm8994_priv *priv, { int ret; - ret = wm8994_device_init(priv, aif_id); + ret = wm8994_setup_interface(priv, aif_id); if (ret < 0) { debug("%s: wm8994 codec chip init failed\n", __func__); return ret; @@ -904,6 +910,7 @@ int wm8994_init(const void *blob, enum en_audio_interface aif_id, unsigned int channels) { struct sound_codec_info *pcodec_info = &g_codec_info; + int ret; /* Get the codec Values */ if (get_codec_values(pcodec_info, blob) < 0) { @@ -914,6 +921,11 @@ int wm8994_init(const void *blob, enum en_audio_interface aif_id, /* shift the device address by 1 for 7 bit addressing */ g_wm8994_i2c_dev_addr = pcodec_info->i2c_dev_addr; wm8994_i2c_init(pcodec_info->i2c_bus); + ret = wm8994_device_init(&g_wm8994_info); + if (ret < 0) { + debug("%s: wm8994 codec chip init failed\n", __func__); + return ret; + } return _wm8994_init(&g_wm8994_info, aif_id, sampling_rate, mclk_freq, bits_per_sample, channels);