From: Wu, Josh <Josh.wu@atmel.com>
Date: Wed, 21 May 2014 02:42:15 +0000 (+0800)
Subject: ARM: at91sam9m10g45ek: enable mci0 support
X-Git-Tag: v2014.07-rc3~4^2~4
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=cf874c190e1796a77be6661cacc43aebb94c7a57;p=oweals%2Fu-boot.git

ARM: at91sam9m10g45ek: enable mci0 support

Also we enable the mmc command in configuration file.

As both CONFIG_CMD_MMC and CONFIG_CMD_USB use the CONFIG_DOS_PARTITION,
so remove the redundant CONFIG_DOS_PARTITION definition.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
---

diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
index 7d7725c4b8..0e6c0da1bd 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
@@ -165,3 +165,20 @@ void at91_macb_hw_init(void)
 #endif
 }
 #endif
+
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+void at91_mci_hw_init(void)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+	at91_set_a_periph(AT91_PIO_PORTA, 0, 0);	/* MCI0 CLK */
+	at91_set_a_periph(AT91_PIO_PORTA, 1, 0);	/* MCI0 CDA */
+	at91_set_a_periph(AT91_PIO_PORTA, 2, 0);	/* MCI0 DA0 */
+	at91_set_a_periph(AT91_PIO_PORTA, 3, 0);	/* MCI0 DA1 */
+	at91_set_a_periph(AT91_PIO_PORTA, 4, 0);	/* MCI0 DA2 */
+	at91_set_a_periph(AT91_PIO_PORTA, 5, 0);	/* MCI0 DA3 */
+
+	/* Enable clock */
+	writel(1 << ATMEL_ID_MCI0, &pmc->pcer);
+}
+#endif
diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
index b7e2efd2fc..57881164c5 100644
--- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
+++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
@@ -16,6 +16,7 @@
 #include <asm/arch/clk.h>
 #include <lcd.h>
 #include <atmel_lcdc.h>
+#include <atmel_mci.h>
 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
 #include <net.h>
 #endif
@@ -217,6 +218,15 @@ void lcd_show_board_info(void)
 #endif /* CONFIG_LCD_INFO */
 #endif
 
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+int board_mmc_init(bd_t *bis)
+{
+	at91_mci_hw_init();
+
+	return atmel_mci_init((void *)ATMEL_BASE_MCI0);
+}
+#endif
+
 int board_early_init_f(void)
 {
 	at91_seriald_hw_init();
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index 5d5fbe5853..61f7bc2079 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -116,6 +116,20 @@
 
 #endif
 
+/* MMC */
+#define CONFIG_CMD_MMC
+
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_GENERIC_ATMEL_MCI
+#endif
+
+#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
 /* Ethernet */
 #define CONFIG_MACB
 #define CONFIG_RMII
@@ -127,7 +141,6 @@
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_ATMEL
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2
-#define CONFIG_DOS_PARTITION
 #define CONFIG_USB_STORAGE
 
 #define CONFIG_SYS_LOAD_ADDR		0x22000000	/* load address */