From: Marcel Ziswiler Date: Tue, 9 Apr 2019 15:24:14 +0000 (+0200) Subject: colibri-imx6ull: migrate pinctrl and regulators to dtb/dm X-Git-Tag: v2019.07-rc2~30^2~32 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=cd69e8ef9b118ec7bf79bd49518c95911a28ecec;p=oweals%2Fu-boot.git colibri-imx6ull: migrate pinctrl and regulators to dtb/dm Migrate pinctrl and regulators to device tree resp. driver model: Ethernet, NAND and UART. Drop BOARD_EARLY_INIT_F as it is anyway no longer used. Enable CMD_DM, CMD_MTD, CMD_REGULATOR and DM_REGULATOR_FIXED. While at it also update copyright period. Signed-off-by: Marcel Ziswiler Reviewed-by: Igor Opaniuk --- diff --git a/board/toradex/colibri-imx6ull/colibri-imx6ull.c b/board/toradex/colibri-imx6ull/colibri-imx6ull.c index f1d5cc6655..8493b1dfdd 100644 --- a/board/toradex/colibri-imx6ull/colibri-imx6ull.c +++ b/board/toradex/colibri-imx6ull/colibri-imx6ull.c @@ -1,8 +1,9 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2018 Toradex AG + * Copyright (C) 2018-2019 Toradex AG */ #include + #include #include #include @@ -14,7 +15,6 @@ #include #include #include -#include #include #include #include @@ -28,25 +28,16 @@ #include #include #include + #include "../common/tdx-common.h" #include "../common/tdx-cfg-block.h" DECLARE_GLOBAL_DATA_PTR; -#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ - PAD_CTL_SRE_FAST | PAD_CTL_HYS) - #define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ PAD_CTL_SPEED_LOW | PAD_CTL_DSE_40ohm | \ PAD_CTL_SRE_FAST | PAD_CTL_HYS) -#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ - PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) -#define ENET_PAD_CTRL_MII (PAD_CTL_DSE_40ohm) - -#define ENET_RX_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_48ohm) - #define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | \ PAD_CTL_DSE_48ohm) @@ -65,13 +56,6 @@ int dram_init(void) return 0; } -static iomux_v3_cfg_t const uart1_pads[] = { - MX6_PAD_UART1_TX_DATA__UART1_DTE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_UART1_RX_DATA__UART1_DTE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_UART1_RTS_B__UART1_DTE_CTS | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_UART1_CTS_B__UART1_DTE_RTS | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - #ifdef CONFIG_FSL_ESDHC static iomux_v3_cfg_t const usdhc1_pads[] = { MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -90,31 +74,12 @@ static iomux_v3_cfg_t const usb_cdet_pads[] = { }; #ifdef CONFIG_NAND_MXS -static iomux_v3_cfg_t const gpmi_pads[] = { - MX6_PAD_NAND_DATA00__RAWNAND_DATA00 | MUX_PAD_CTRL(NAND_PAD_CTRL), - MX6_PAD_NAND_DATA01__RAWNAND_DATA01 | MUX_PAD_CTRL(NAND_PAD_CTRL), - MX6_PAD_NAND_DATA02__RAWNAND_DATA02 | MUX_PAD_CTRL(NAND_PAD_CTRL), - MX6_PAD_NAND_DATA03__RAWNAND_DATA03 | MUX_PAD_CTRL(NAND_PAD_CTRL), - MX6_PAD_NAND_DATA04__RAWNAND_DATA04 | MUX_PAD_CTRL(NAND_PAD_CTRL), - MX6_PAD_NAND_DATA05__RAWNAND_DATA05 | MUX_PAD_CTRL(NAND_PAD_CTRL), - MX6_PAD_NAND_DATA06__RAWNAND_DATA06 | MUX_PAD_CTRL(NAND_PAD_CTRL), - MX6_PAD_NAND_DATA07__RAWNAND_DATA07 | MUX_PAD_CTRL(NAND_PAD_CTRL), - MX6_PAD_NAND_CLE__RAWNAND_CLE | MUX_PAD_CTRL(NAND_PAD_CTRL), - MX6_PAD_NAND_ALE__RAWNAND_ALE | MUX_PAD_CTRL(NAND_PAD_CTRL), - MX6_PAD_NAND_RE_B__RAWNAND_RE_B | MUX_PAD_CTRL(NAND_PAD_CTRL), - MX6_PAD_NAND_WE_B__RAWNAND_WE_B | MUX_PAD_CTRL(NAND_PAD_CTRL), - MX6_PAD_NAND_CE0_B__RAWNAND_CE0_B | MUX_PAD_CTRL(NAND_PAD_CTRL), - MX6_PAD_NAND_READY_B__RAWNAND_READY_B | MUX_PAD_CTRL(NAND_PAD_READY0_CTRL), -}; - static void setup_gpmi_nand(void) { - imx_iomux_v3_setup_multiple_pads(gpmi_pads, ARRAY_SIZE(gpmi_pads)); - setup_gpmi_io_clk((3 << MXC_CCM_CSCDR1_BCH_PODF_OFFSET) | (3 << MXC_CCM_CSCDR1_GPMI_PODF_OFFSET)); } -#endif +#endif /* CONFIG_NAND_MXS */ #ifdef CONFIG_VIDEO_MXS static iomux_v3_cfg_t const lcd_pads[] = { @@ -170,31 +135,6 @@ static int setup_lcd(void) } #endif -#ifdef CONFIG_FEC_MXC -static iomux_v3_cfg_t const fec2_pads[] = { - MX6_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 | MUX_PAD_CTRL(ENET_PAD_CTRL) | MUX_MODE_SION, - MX6_PAD_GPIO1_IO06__ENET2_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL_MII), - MX6_PAD_GPIO1_IO07__ENET2_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL_MII), - MX6_PAD_ENET2_RX_DATA0__ENET2_RDATA00 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX6_PAD_ENET2_RX_DATA1__ENET2_RDATA01 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX6_PAD_ENET2_RX_ER__ENET2_RX_ER | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX6_PAD_ENET2_RX_EN__ENET2_RX_EN | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), - MX6_PAD_ENET2_TX_DATA0__ENET2_TDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET2_TX_DATA1__ENET2_TDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET2_TX_EN__ENET2_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), -}; - -static void setup_iomux_fec(void) -{ - imx_iomux_v3_setup_multiple_pads(fec2_pads, ARRAY_SIZE(fec2_pads)); -} -#endif - -static void setup_iomux_uart(void) -{ - imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); -} - #ifdef CONFIG_FSL_ESDHC #define USDHC1_CD_GPIO IMX_GPIO_NR(5, 0) @@ -247,20 +187,17 @@ int board_mmc_init(bd_t *bis) #endif #ifdef CONFIG_FEC_MXC - static int setup_fec(void) { struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; int ret; - setup_iomux_fec(); - /* provide the PHY clock from the i.MX 6 */ ret = enable_fec_anatop_clock(1, ENET_50MHZ); if (ret) return ret; - /* Use 50M anatop REF_CLK and output it on the ENET2_TX_CLK */ + /* Use 50M anatop REF_CLK and output it on ENET2_TX_CLK */ clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC2_CLOCK_MUX2_SEL_MASK, IOMUX_GPR1_FEC2_CLOCK_MUX1_SEL_MASK); @@ -277,14 +214,7 @@ int board_phy_config(struct phy_device *phydev) phydev->drv->config(phydev); return 0; } -#endif - -int board_early_init_f(void) -{ - setup_iomux_uart(); - - return 0; -} +#endif /* CONFIG_FEC_MXC */ int board_init(void) { diff --git a/configs/colibri-imx6ull_defconfig b/configs/colibri-imx6ull_defconfig index b19b3b7fb2..ce2c09338d 100644 --- a/configs/colibri-imx6ull_defconfig +++ b/configs/colibri-imx6ull_defconfig @@ -15,7 +15,6 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOUNCE_BUFFER=y -CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_PROMPT="Colibri iMX6ULL # " # CONFIG_CMD_ELF is not set # CONFIG_CMD_IMI is not set @@ -24,9 +23,11 @@ CONFIG_CMD_ASKENV=y CONFIG_CRC32_VERIFY=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_DFU=y +CONFIG_CMD_DM=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_MTD=y CONFIG_CMD_NAND_TRIMFFS=y CONFIG_CMD_NAND_TORTURE=y CONFIG_CMD_USB=y @@ -34,6 +35,7 @@ CONFIG_CMD_USB_SDP=y CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_BMP=y CONFIG_CMD_CACHE=y +CONFIG_CMD_REGULATOR=y CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand" CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:512k(mx6ull-bcb),1536k(u-boot1)ro,1536k(u-boot2)ro,512k(u-boot-env),-(ubi)" @@ -63,6 +65,7 @@ CONFIG_MII=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y # CONFIG_SPL_SERIAL_PRESENT is not set CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y