From: Ash Benz Date: Fri, 27 May 2016 14:26:45 +0000 (+0800) Subject: ipq806x/dts: Add Archer C2600 DTS X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=cd36d71655eecfeba3be52a51392e22140ed63d8;p=librecmc%2Flibrecmc.git ipq806x/dts: Add Archer C2600 DTS Signed-off-by: Ash Benz --- diff --git a/target/linux/ipq806x/patches-4.4/802-ARM-qcom-add-TPLink-C2600-device-tree.patch b/target/linux/ipq806x/patches-4.4/802-ARM-qcom-add-TPLink-C2600-device-tree.patch new file mode 100644 index 0000000000..8952f3339d --- /dev/null +++ b/target/linux/ipq806x/patches-4.4/802-ARM-qcom-add-TPLink-C2600-device-tree.patch @@ -0,0 +1,425 @@ +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -506,6 +506,7 @@ + qcom-apq8084-ifc6540.dtb \ + qcom-apq8084-mtp.dtb \ + qcom-ipq8064-ap148.dtb \ ++ qcom-ipq8064-c2600.dtb \ + qcom-ipq8064-db149.dtb \ + qcom-ipq8064-r7500.dtb \ + qcom-ipq8064-d7800.dtb \ +--- /dev/null ++++ b/arch/arm/boot/dts/qcom-ipq8064-c2600.dts +@@ -0,0 +1,412 @@ ++#include "qcom-ipq8064-v1.0.dtsi" ++#include ++ ++/ { ++ model = "TP-Link Archer C2600"; ++ compatible = "tplink,c2600", "qcom,ipq8064"; ++ ++ memory@0 { ++ reg = <0x42000000 0x1e000000>; ++ device_type = "memory"; ++ }; ++ ++ reserved-memory { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ rsvd@41200000 { ++ reg = <0x41200000 0x300000>; ++ no-map; ++ }; ++ }; ++ ++ aliases { ++ serial0 = &uart4; ++ mdio-gpio0 = &mdio0; ++ }; ++ ++ chosen { ++ linux,stdout-path = "serial0:115200n8"; ++ }; ++ ++ soc { ++ pinmux@800000 { ++ i2c4_pins: i2c4_pinmux { ++ pins = "gpio12", "gpio13"; ++ function = "gsbi4"; ++ bias-disable; ++ }; ++ ++ spi_pins: spi_pins { ++ mux { ++ pins = "gpio18", "gpio19", "gpio21"; ++ function = "gsbi5"; ++ drive-strength = <10>; ++ bias-none; ++ }; ++ }; ++ ++ nand_pins: nand_pins { ++ mux { ++ pins = "gpio34", "gpio35", "gpio36", ++ "gpio37", "gpio38", "gpio39", ++ "gpio40", "gpio41", "gpio42", ++ "gpio43", "gpio44", "gpio45", ++ "gpio46", "gpio47"; ++ function = "nand"; ++ drive-strength = <10>; ++ bias-disable; ++ }; ++ ++ pullups { ++ pins = "gpio39"; ++ bias-pull-up; ++ }; ++ ++ hold { ++ pins = "gpio40", "gpio41", "gpio42", ++ "gpio43", "gpio44", "gpio45", ++ "gpio46", "gpio47"; ++ bias-bus-hold; ++ }; ++ }; ++ ++ mdio0_pins: mdio0_pins { ++ mux { ++ pins = "gpio0", "gpio1"; ++ function = "gpio"; ++ drive-strength = <8>; ++ bias-disable; ++ }; ++ }; ++ ++ rgmii2_pins: rgmii2_pins { ++ mux { ++ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", ++ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; ++ function = "rgmii2"; ++ drive-strength = <8>; ++ bias-disable; ++ }; ++ }; ++ }; ++ ++ gsbi@16300000 { ++ qcom,mode = ; ++ status = "ok"; ++ serial@16340000 { ++ status = "ok"; ++ }; ++ /* ++ * The i2c device on gsbi4 should not be enabled. ++ * On ipq806x designs gsbi4 i2c is meant for exclusive ++ * RPM usage. Turning this on in kernel manifests as ++ * i2c failure for the RPM. ++ */ ++ }; ++ ++ gsbi5: gsbi@1a200000 { ++ qcom,mode = ; ++ status = "ok"; ++ ++ spi4: spi@1a280000 { ++ status = "ok"; ++ spi-max-frequency = <50000000>; ++ ++ pinctrl-0 = <&spi_pins>; ++ pinctrl-names = "default"; ++ ++ cs-gpios = <&qcom_pinmux 20 0>; ++ ++ flash: m25p80@0 { ++ compatible = "s25fl256s1"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ spi-max-frequency = <50000000>; ++ reg = <0>; ++ ++ SBL1@0 { ++ label = "SBL1"; ++ reg = <0x0 0x20000>; ++ read-only; ++ }; ++ MIBIB@20000 { ++ label = "MIBIB"; ++ reg = <0x20000 0x20000>; ++ read-only; ++ }; ++ SBL2@40000 { ++ label = "SBL2"; ++ reg = <0x40000 0x20000>; ++ read-only; ++ }; ++ SBL3@60000 { ++ label = "SBL3"; ++ reg = <0x60000 0x30000>; ++ read-only; ++ }; ++ DDRCONFIG@90000 { ++ label = "DDRCONFIG"; ++ reg = <0x90000 0x10000>; ++ read-only; ++ }; ++ SSD@a0000 { ++ label = "SSD"; ++ reg = <0xa0000 0x10000>; ++ read-only; ++ }; ++ TZ@b0000 { ++ label = "TZ"; ++ reg = <0xb0000 0x30000>; ++ read-only; ++ }; ++ RPM@e0000 { ++ label = "RPM"; ++ reg = <0xe0000 0x20000>; ++ read-only; ++ }; ++ fs-uboot@100000 { ++ label = "fs-uboot"; ++ reg = <0x100000 0x70000>; ++ read-only; ++ }; ++ uboot-env@170000 { ++ label = "uboot-env"; ++ reg = <0x170000 0x40000>; ++ read-only; ++ }; ++ radio@1b0000 { ++ label = "radio"; ++ reg = <0x1b0000 0x40000>; ++ read-only; ++ }; ++ os-image@1f0000 { ++ label = "os-image"; ++ reg = <0x1f0000 0x200000>; ++ }; ++ rootfs@3f0000 { ++ label = "rootfs"; ++ reg = <0x3f0000 0x1b00000>; ++ }; ++ defaultmac: default-mac@1ef0000 { ++ label = "default-mac"; ++ reg = <0x1ef0000 0x00200>; ++ read-only; ++ }; ++ pin@1ef0200 { ++ label = "pin"; ++ reg = <0x1ef0200 0x00200>; ++ read-only; ++ }; ++ product-info@1ef0400 { ++ label = "product-info"; ++ reg = <0x1ef0400 0x0fc00>; ++ read-only; ++ }; ++ partition-table@1f00000 { ++ label = "partition-table"; ++ reg = <0x1f00000 0x10000>; ++ read-only; ++ }; ++ soft-version@1f10000 { ++ label = "soft-version"; ++ reg = <0x1f10000 0x10000>; ++ read-only; ++ }; ++ support-list@1f20000 { ++ label = "support-list"; ++ reg = <0x1f20000 0x10000>; ++ read-only; ++ }; ++ profile@1f30000 { ++ label = "profile"; ++ reg = <0x1f30000 0x10000>; ++ read-only; ++ }; ++ default-config@1f40000 { ++ label = "default-config"; ++ reg = <0x1f40000 0x10000>; ++ read-only; ++ }; ++ user-config@1f50000 { ++ label = "user-config"; ++ reg = <0x1f50000 0x40000>; ++ read-only; ++ }; ++ qos-db@1f90000 { ++ label = "qos-db"; ++ reg = <0x1f90000 0x40000>; ++ read-only; ++ }; ++ usb-config@1fd0000 { ++ label = "usb-config"; ++ reg = <0x1fd0000 0x10000>; ++ read-only; ++ }; ++ log@1fe0000 { ++ label = "log"; ++ reg = <0x1fe0000 0x20000>; ++ read-only; ++ }; ++ }; ++ }; ++ }; ++ ++ phy@100f8800 { /* USB3 port 1 HS phy */ ++ status = "ok"; ++ }; ++ ++ phy@100f8830 { /* USB3 port 1 SS phy */ ++ status = "ok"; ++ }; ++ ++ phy@110f8800 { /* USB3 port 0 HS phy */ ++ status = "ok"; ++ }; ++ ++ phy@110f8830 { /* USB3 port 0 SS phy */ ++ status = "ok"; ++ }; ++ ++ usb30@0 { ++ status = "ok"; ++ }; ++ ++ usb30@1 { ++ status = "ok"; ++ }; ++ ++ pcie0: pci@1b500000 { ++ status = "ok"; ++ phy-tx0-term-offset = <7>; ++ }; ++ ++ pcie1: pci@1b700000 { ++ status = "ok"; ++ phy-tx0-term-offset = <7>; ++ }; ++ ++ mdio0: mdio { ++ compatible = "virtual,mdio-gpio"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; ++ pinctrl-0 = <&mdio0_pins>; ++ pinctrl-names = "default"; ++ ++ phy0: ethernet-phy@0 { ++ device_type = "ethernet-phy"; ++ reg = <0>; ++ qca,ar8327-initvals = < ++ 0x00004 0x7600000 /* PAD0_MODE */ ++ 0x00008 0x1000000 /* PAD5_MODE */ ++ 0x0000c 0x80 /* PAD6_MODE */ ++ 0x000e4 0xaa545 /* MAC_POWER_SEL */ ++ 0x000e0 0xc74164de /* SGMII_CTRL */ ++ 0x0007c 0x4e /* PORT0_STATUS */ ++ 0x00094 0x4e /* PORT6_STATUS */ ++ >; ++ }; ++ ++ phy4: ethernet-phy@4 { ++ device_type = "ethernet-phy"; ++ reg = <4>; ++ }; ++ }; ++ ++ gmac1: ethernet@37200000 { ++ status = "ok"; ++ phy-mode = "rgmii"; ++ qcom,id = <1>; ++ ++ pinctrl-0 = <&rgmii2_pins>; ++ pinctrl-names = "default"; ++ ++ mtd-mac-address = <&defaultmac 0x8>; ++ mtd-mac-address-increment = <1>; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ ++ gmac2: ethernet@37400000 { ++ status = "ok"; ++ phy-mode = "sgmii"; ++ qcom,id = <2>; ++ ++ mtd-mac-address = <&defaultmac 0x8>; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ ++ wifi { ++ label = "wifi"; ++ gpios = <&qcom_pinmux 49 1>; ++ linux,code = ; ++ }; ++ ++ reset { ++ label = "reset"; ++ gpios = <&qcom_pinmux 64 1>; ++ linux,code = ; ++ }; ++ ++ wps { ++ label = "wps"; ++ gpios = <&qcom_pinmux 65 1>; ++ linux,code = ; ++ }; ++ ledgeneral { ++ label = "ledgeneral"; ++ gpios = <&qcom_pinmux 16 1>; ++ linux,code = ; ++ }; ++ }; ++ ++ gpio-leds { ++ compatible = "gpio-leds"; ++ ++ lan { ++ label = "lan:blue"; ++ gpios = <&qcom_pinmux 6 0>; ++ }; ++ usb4 { ++ label = "usb_4:blue"; ++ gpios = <&qcom_pinmux 7 0>; ++ }; ++ usb2 { ++ label = "usb_2:blue"; ++ gpios = <&qcom_pinmux 8 0>; ++ }; ++ wps { ++ label = "wps:blue"; ++ gpios = <&qcom_pinmux 9 0>; ++ }; ++ wan_blue { ++ label = "wan:blue"; ++ gpios = <&qcom_pinmux 33 1>; ++ }; ++ status { ++ label = "status:blue"; ++ gpios = <&qcom_pinmux 53 0>; ++ default-state = "on"; ++ }; ++ ledgnr { ++ label = "ledgnr:blue"; ++ gpios = <&qcom_pinmux 66 0>; ++ }; ++ }; ++}; ++ ++&adm_dma { ++ status = "ok"; ++};