From: Klaus Goger Date: Mon, 11 Sep 2017 19:04:59 +0000 (+0200) Subject: rockchip: board: lion_rk3368: update README flash instructions X-Git-Tag: v2017.11-rc1~87^2~35 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=cc8fb2f79304963597248ad7cdab6cf2f9b336ef;p=oweals%2Fu-boot.git rockchip: board: lion_rk3368: update README flash instructions Add a section to the README on how to flash the on-board eMMC with the rkdeveloptool. Signed-off-by: Klaus Goger Signed-off-by: Philipp Tomsich Reviewed-by: Philipp Tomsich Acked-by: Philipp Tomsich --- diff --git a/board/theobroma-systems/lion_rk3368/README b/board/theobroma-systems/lion_rk3368/README index 47304fcba6..83e4332984 100644 --- a/board/theobroma-systems/lion_rk3368/README +++ b/board/theobroma-systems/lion_rk3368/README @@ -26,12 +26,32 @@ Build the full U-Boot and a FIT image including the ATF > make CROSS_COMPILE=aarch64-unknown-elf- ARCH=arm u-boot.itb -Write to a SD-card -================== +Flash the image +=============== + +Copy the SPL to offset 32k and the FIT image containing the payloads +(U-Boot proper, ATF, devicetree) to offset 256k card. + +SD-Card +------- > dd if=spl-3368.img of=/dev/sdb seek=64 > dd if=u-boot.itb of=/dev/sdb seek=512 +eMMC +---- + +rkdeveloptool allows to flash the on-board eMMC via the USB OTG interface with +help of the Rockchip loader binary. + + > git clone https://github.com/rockchip-linux/rkdeveloptool + > cd rkdeveloptool + > autoreconf -i && && ./configure && make + > git clone https://github.com/rockchip-linux/rkbin.git + > ./rkdeveloptool db rkbin/rk33/rk3368_loader_v2.00.256.bin + > ./rkdeveloptool wl 64 ../spl.img + > ./rkdeveloptool wl 512 ../u-boot.itb + If everything went according to plan, you should see the following output on UART0: