From: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Date: Tue, 19 Feb 2013 02:19:45 +0000 (+0000)
Subject: I2C: S3C24X0: Bug fixes in i2c_transfer
X-Git-Tag: v2013.04-rc2~56
X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=cb466c056a878dcae27b76eb86a124e0c5203e7a;p=oweals%2Fu-boot.git

I2C: S3C24X0: Bug fixes in i2c_transfer

This patch corrects the following issues

1) Write the correct M/T Stop value to I2CSTAT after i2c write.
   According to the spec, after finish the data transmission, we should
   write a M/T Stop (I2C_MODE_MT | I2C_TXRX_ENA) to I2CSTAT instead of
   a M/R Stop (I2C_MODE_MR | I2C_TXRX_ENA).
2) Not split the write to I2CSTAT into 2 steps in i2c read.
   According to the spec, we should write the combined M/R Start value to
   I2CSTAT after setting the slave address to I2CDS
3) Fix the mistake of making an equality check to an assignment.
   In the case of I2C write with the zero-length address, while tranfering the
   data, it should be an equality check (==) instead of an assignment (=).

Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
---

diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
index 00308b5223..46d25061ee 100644
--- a/drivers/i2c/s3c24x0_i2c.c
+++ b/drivers/i2c/s3c24x0_i2c.c
@@ -324,7 +324,7 @@ static int i2c_transfer(struct s3c24x0_i2c *i2c,
 			writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP,
 			       &i2c->iicstat);
 			i = 0;
-			while ((i < data_len) && (result = I2C_OK)) {
+			while ((i < data_len) && (result == I2C_OK)) {
 				result = WaitForXfer(i2c);
 				writel(data[i], &i2c->iicds);
 				ReadWriteByte(i2c);
@@ -336,17 +336,16 @@ static int i2c_transfer(struct s3c24x0_i2c *i2c,
 			result = WaitForXfer(i2c);
 
 		/* send STOP */
-		writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->iicstat);
+		writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->iicstat);
 		ReadWriteByte(i2c);
 		break;
 
 	case I2C_READ:
 		if (addr && addr_len) {
-			writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->iicstat);
 			writel(chip, &i2c->iicds);
 			/* send START */
-			writel(readl(&i2c->iicstat) | I2C_START_STOP,
-			       &i2c->iicstat);
+			writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP,
+				&i2c->iicstat);
 			result = WaitForXfer(i2c);
 			if (IsACK(i2c)) {
 				i = 0;
@@ -380,11 +379,10 @@ static int i2c_transfer(struct s3c24x0_i2c *i2c,
 			}
 
 		} else {
-			writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->iicstat);
 			writel(chip, &i2c->iicds);
 			/* send START */
-			writel(readl(&i2c->iicstat) | I2C_START_STOP,
-			       &i2c->iicstat);
+			writel(I2C_MODE_MR | I2C_TXRX_ENA | I2C_START_STOP,
+				&i2c->iicstat);
 			result = WaitForXfer(i2c);
 
 			if (IsACK(i2c)) {