From: Manikandan Pillai Date: Wed, 8 Apr 2009 03:44:35 +0000 (+0530) Subject: SMC911x driver fixed for NFS boot X-Git-Tag: v2009.06-rc3~13 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=ca9c8a1e10fac01e6a1129f82a7ce18bd818fa43;p=oweals%2Fu-boot.git SMC911x driver fixed for NFS boot eth_halt() function in the smc911x drivers used to call the smc911x_reset() function. eth_halt() used to be called after tftp transfers. This used to put the ethernet chip in reset while the linux boots up resulting in the ethernet driver not coming up. NFS boot used to fail as a result. This patch calls smc911x_shutdown() instead of smc911x_reset(). Some comments received has also been fixed. Signed-off-by: Manikandan Pillai Signed-off-by: Ben Warren --- diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index 8c9a2a8a05..455b055a9c 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -117,6 +117,27 @@ static int smc911x_phy_reset(void) return 0; } +static void smc911x_shutdown(void) +{ + unsigned int cr; + + /* Turn of Rx and TX */ + cr = smc911x_get_mac_csr(MAC_CR); + cr &= ~(MAC_CR_TXEN | MAC_CR_RXEN | MAC_CR_HBDIS); + smc911x_set_mac_csr(MAC_CR, cr); + + /* Stop Transmission */ + cr = smc911x_get_mac_csr(TX_CFG); + cr &= ~(TX_CFG_STOP_TX); + smc911x_set_mac_csr(TX_CFG, cr); + /* Stop receiving packets */ + cr = smc911x_get_mac_csr(RX_CFG); + cr &= ~(RX_CFG_RXDOFF); + smc911x_set_mac_csr(RX_CFG, cr); + +} + + static void smc911x_phy_configure(void) { int timeout; @@ -225,7 +246,7 @@ int eth_send(volatile void *packet, int length) void eth_halt(void) { - smc911x_reset(); + smc911x_shutdown(); } int eth_rx(void)