From: Marek Vasut Date: Sun, 19 Apr 2020 01:09:47 +0000 (+0200) Subject: net: dc2114x: Clean up init code X-Git-Tag: v2020.07-rc2~18^2~42 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=ca5cb04b7fef31d66461cb58872d9ea32a24628b;p=oweals%2Fu-boot.git net: dc2114x: Clean up init code Clean up the driver init code to bring it up to standards with U-Boot coding style, no functional change. Signed-off-by: Marek Vasut Cc: Joe Hershberger --- diff --git a/drivers/net/dc2114x.c b/drivers/net/dc2114x.c index 40bfc5281b..d302d0362a 100644 --- a/drivers/net/dc2114x.c +++ b/drivers/net/dc2114x.c @@ -167,33 +167,30 @@ static struct pci_device_id supported[] = { int dc21x4x_initialize(bd_t *bis) { - int idx=0; - int card_number = 0; - unsigned int cfrv; - unsigned char timer; - pci_dev_t devbusfn; - unsigned int iobase; - unsigned short status; - struct eth_device* dev; - - while(1) { - devbusfn = pci_find_devices(supported, idx++); - if (devbusfn == -1) { + struct eth_device *dev; + unsigned short status; + unsigned char timer; + unsigned int iobase; + int card_number = 0; + pci_dev_t devbusfn; + unsigned int cfrv; + int idx = 0; + + while (1) { + devbusfn = pci_find_devices(supported, idx++); + if (devbusfn == -1) break; - } /* Get the chip configuration revision register. */ pci_read_config_dword(devbusfn, PCI_REVISION_ID, &cfrv); - if ((cfrv & CFRV_RN) < DC2114x_BRK ) { + if ((cfrv & CFRV_RN) < DC2114x_BRK) { printf("Error: The chip is not DC21143.\n"); continue; } pci_read_config_word(devbusfn, PCI_COMMAND, &status); - status |= - PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER; + status |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; pci_write_config_word(devbusfn, PCI_COMMAND, status); pci_read_config_word(devbusfn, PCI_COMMAND, &status); @@ -211,30 +208,31 @@ int dc21x4x_initialize(bd_t *bis) pci_read_config_byte(devbusfn, PCI_LATENCY_TIMER, &timer); if (timer < 0x60) { - pci_write_config_byte(devbusfn, PCI_LATENCY_TIMER, 0x60); + pci_write_config_byte(devbusfn, PCI_LATENCY_TIMER, + 0x60); } /* read BAR for memory space access */ pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_1, &iobase); iobase &= PCI_BASE_ADDRESS_MEM_MASK; - debug ("dc21x4x: DEC 21142 PCI Device @0x%x\n", iobase); - - dev = (struct eth_device*) malloc(sizeof *dev); + debug("dc21x4x: DEC 21142 PCI Device @0x%x\n", iobase); + dev = (struct eth_device *)malloc(sizeof(*dev)); if (!dev) { printf("Can not allocalte memory of dc21x4x\n"); break; } + memset(dev, 0, sizeof(*dev)); sprintf(dev->name, "dc21x4x#%d", card_number); dev->iobase = pci_mem_to_phys(devbusfn, iobase); - dev->priv = (void*) devbusfn; - dev->init = dc21x4x_init; - dev->halt = dc21x4x_halt; - dev->send = dc21x4x_send; - dev->recv = dc21x4x_recv; + dev->priv = (void *)devbusfn; + dev->init = dc21x4x_init; + dev->halt = dc21x4x_halt; + dev->send = dc21x4x_send; + dev->recv = dc21x4x_recv; /* Ensure we're not sleeping. */ pci_write_config_byte(devbusfn, PCI_CFDA_PSM, WAKEUP); @@ -251,10 +249,10 @@ int dc21x4x_initialize(bd_t *bis) return card_number; } -static int dc21x4x_init(struct eth_device* dev, bd_t* bis) +static int dc21x4x_init(struct eth_device *dev, bd_t *bis) { - int i; - int devbusfn = (int) dev->priv; + int i; + int devbusfn = (int)dev->priv; /* Ensure we're not sleeping. */ pci_write_config_byte(devbusfn, PCI_CFDA_PSM, WAKEUP); @@ -271,12 +269,12 @@ static int dc21x4x_init(struct eth_device* dev, bd_t* bis) for (i = 0; i < NUM_RX_DESC; i++) { rx_ring[i].status = cpu_to_le32(R_OWN); rx_ring[i].des1 = cpu_to_le32(RX_BUFF_SZ); - rx_ring[i].buf = cpu_to_le32( - phys_to_bus((u32)net_rx_packets[i])); + rx_ring[i].buf = + cpu_to_le32(phys_to_bus((u32)net_rx_packets[i])); rx_ring[i].next = 0; } - for (i=0; i < NUM_TX_DESC; i++) { + for (i = 0; i < NUM_TX_DESC; i++) { tx_ring[i].status = 0; tx_ring[i].des1 = 0; tx_ring[i].buf = 0; @@ -291,8 +289,8 @@ static int dc21x4x_init(struct eth_device* dev, bd_t* bis) tx_ring[txRingSize - 1].des1 |= cpu_to_le32(TD_TER); /* Tell the adapter where the TX/RX rings are located. */ - OUTL(dev, phys_to_bus((u32) &rx_ring), DE4X5_RRBA); - OUTL(dev, phys_to_bus((u32) &tx_ring), DE4X5_TRBA); + OUTL(dev, phys_to_bus((u32)&rx_ring), DE4X5_RRBA); + OUTL(dev, phys_to_bus((u32)&tx_ring), DE4X5_TRBA); START_DE4X5(dev);