From: roy zang Date: Fri, 1 Dec 2006 11:01:25 +0000 (+0800) Subject: Fix the exception occuring in RAM table search issue. X-Git-Tag: v1.3.0-rc1~109^2~3^2~6^2~4 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=c9c1eeed7dd193fa65fb194654132040d49d4d3a;p=oweals%2Fu-boot.git Fix the exception occuring in RAM table search issue. The original search_one_table() function code can only processes the search for the exception occurring in FLASH/ROM, because the exception and fixup table usually locate in FLASH. If the exception address is also in FLASH, it will be OK. If the exception occurs in RAM, after the u-boot relocation, a relocation offset should be added. clean up the code in cpu/74xx_7xx/cpu.c Signed-off-by: Roy Zang --- diff --git a/cpu/74xx_7xx/cpu.c b/cpu/74xx_7xx/cpu.c index ca45ca0457..84d5da3116 100644 --- a/cpu/74xx_7xx/cpu.c +++ b/cpu/74xx_7xx/cpu.c @@ -108,11 +108,11 @@ get_cpu_type(void) case 0x8003: type = CPU_7447A; break; - + case 0x8004: type = CPU_7448; break; - + default: break; } @@ -164,6 +164,10 @@ int checkcpu (void) str = "MPC7410"; break; + case CPU_7447A: + str = "MPC7447A"; + break; + case CPU_7448: str = "MPC7448"; break; @@ -180,14 +184,6 @@ int checkcpu (void) str = "MPC7457"; break; - case CPU_7447A: - str = "MPC7447A"; - break; - - case CPU_7448: - str = "MPC7448"; - break; - default: printf("Unknown CPU -- PVR: 0x%08x\n", pvr); return -1; diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h index b13b699b59..c9131a432c 100644 --- a/include/configs/mpc7448hpc2.h +++ b/include/configs/mpc7448hpc2.h @@ -439,6 +439,5 @@ */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_EXCEPTION_AFTER_RELOCATE #define CFG_SERIAL_HANG_IN_EXCEPTION #endif /* __CONFIG_H */ diff --git a/lib_ppc/extable.c b/lib_ppc/extable.c index 34b5d460cf..623b5f129c 100644 --- a/lib_ppc/extable.c +++ b/lib_ppc/extable.c @@ -57,16 +57,22 @@ search_one_table(const struct exception_table_entry *first, long diff; mid = (last - first) / 2 + first; -#ifdef CFG_EXCEPTION_AFTER_RELOCATE - diff = (mid->insn + gd->reloc_off) - value; - if (diff == 0) - return (mid->fixup + gd->reloc_off); -#else - diff = mid->insn - value; - if (diff == 0) - return mid->fixup; -#endif - else if (diff < 0) + if (mid > CFG_MONITOR_BASE){ + /* exception occurs in FLASH, before u-boot relocation. + * No relocation offset is needed. + */ + diff = mid->insn - value; + if (diff == 0) + return mid->fixup; + } else { + /* exception occurs in RAM, after u-boot relocation. + * A relocation offset should be added. + */ + diff = (mid->insn + gd->reloc_off) - value; + if (diff == 0) + return (mid->fixup + gd->reloc_off); + } + if (diff < 0) first = mid+1; else last = mid-1; @@ -83,6 +89,7 @@ search_exception_table(unsigned long addr) /* There is only the kernel to search. */ ret = search_one_table(__start___ex_table, __stop___ex_table-1, addr); + /* if the serial port does not hang in exception, printf can be used */ #if !defined(CFG_SERIAL_HANG_IN_EXCEPTION) if (ex_tab_message) printf("Bus Fault @ 0x%08lx, fixup 0x%08lx\n", addr, ret);