From: John Crispin Date: Thu, 6 Nov 2014 09:31:37 +0000 (+0000) Subject: ralink: make pci driver handle mt7628 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=c5954fc510056ddef2d109d4f71edcbff42a51b3;p=librecmc%2Flibrecmc.git ralink: make pci driver handle mt7628 Signed-off-by: John Crispin SVN-Revision: 43198 --- diff --git a/target/linux/ramips/dts/mt7620a.dtsi b/target/linux/ramips/dts/mt7620a.dtsi index cc6177c2e4..c3c7ba4e7e 100644 --- a/target/linux/ramips/dts/mt7620a.dtsi +++ b/target/linux/ramips/dts/mt7620a.dtsi @@ -430,7 +430,7 @@ }; pcie@10140000 { - compatible = "ralink,mt7620a-pci"; + compatible = "ralink,mt7620-pci"; reg = <0x10140000 0x100 0x10142000 0x100>; diff --git a/target/linux/ramips/dts/mt7628an.dtsi b/target/linux/ramips/dts/mt7628an.dtsi index 1f3876975d..ee953cd026 100644 --- a/target/linux/ramips/dts/mt7628an.dtsi +++ b/target/linux/ramips/dts/mt7628an.dtsi @@ -202,9 +202,6 @@ reg = <0x10140000 0x100 0x10142000 0x100>; - ranges = <0x2000000 0 0x8000000 0x2000000 0 0x1000000 /* pci memory */ - 0x1000000 0 0x00000000 0x10160000 0 0x10000>; /* io space */ - resets = <&rstctrl 26>; reset-names = "pcie0"; diff --git a/target/linux/ramips/patches-3.14/0032-PCI-MIPS-adds-mt7620a-pcie-driver.patch b/target/linux/ramips/patches-3.14/0032-PCI-MIPS-adds-mt7620a-pcie-driver.patch index d1dec60ba7..9946c1a3cd 100644 --- a/target/linux/ramips/patches-3.14/0032-PCI-MIPS-adds-mt7620a-pcie-driver.patch +++ b/target/linux/ramips/patches-3.14/0032-PCI-MIPS-adds-mt7620a-pcie-driver.patch @@ -23,7 +23,7 @@ Signed-off-by: John Crispin obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o --- /dev/null +++ b/arch/mips/pci/pci-mt7620a.c -@@ -0,0 +1,363 @@ +@@ -0,0 +1,401 @@ +/* + * Ralink MT7620A SoC PCI support + * @@ -49,12 +49,12 @@ Signed-off-by: John Crispin +#include + +#include ++#include + +#define RALINK_PCI_MM_MAP_BASE 0x20000000 +#define RALINK_PCI_IO_MAP_BASE 0x10160000 + +#define RALINK_INT_PCIE0 4 -+#define RALINK_SYSTEM_CONTROL_BASE 0xb0000000 +#define RALINK_SYSCFG1 0x14 +#define RALINK_CLKCFG1 0x30 +#define RALINK_GPIOMODE 0x60 @@ -63,19 +63,11 @@ Signed-off-by: John Crispin +#define PCIEPHY0_CFG 0x90 +#define PPLL_CFG1 0x9c +#define PPLL_DRV 0xa0 -+#define RALINK_PCI_HOST_MODE_EN (1<<7) -+#define RALINK_PCIE_RC_MODE_EN (1<<8) -+#define RALINK_PCIE_RST (1<<23) -+#define RALINK_PCI_RST (1<<24) -+#define RALINK_PCI_CLK_EN (1<<19) -+#define RALINK_PCIE_CLK_EN (1<<21) -+#define PCI_SLOTx2 (1<<11) -+#define PCI_SLOTx1 (2<<11) +#define PDRV_SW_SET (1<<31) +#define LC_CKDRVPD_ (1<<19) + +#define RALINK_PCI_CONFIG_ADDR 0x20 -+#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG 0x24 ++#define RALINK_PCI_CONFIG_DATA_VIRT_REG 0x24 +#define MEMORY_BASE 0x0 +#define RALINK_PCIE0_RST (1<<26) +#define RALINK_PCI_BASE 0xB0140000 @@ -93,6 +85,7 @@ Signed-off-by: John Crispin +#define RALINK_PCI0_STATUS 0x50 +#define RALINK_PCI_PCIMSK_ADDR 0x0C + ++#define RALINK_PCIEPHY_P0_CTL_OFFSET 0x7498 +#define RALINK_PCIE0_CLK_EN (1 << 26) + +#define BUSY 0x80000000 @@ -101,7 +94,6 @@ Signed-off-by: John Crispin +#define DATA_SHIFT 0 +#define ADDR_SHIFT 8 + -+ +static void __iomem *bridge_base; +static void __iomem *pcie_base; + @@ -130,17 +122,17 @@ Signed-off-by: John Crispin +static inline void pcie_m32(u32 clr, u32 set, unsigned reg) +{ + u32 val = pcie_r32(reg); ++ + val &= ~clr; + val |= set; + pcie_w32(val, reg); +} + -+int wait_pciephy_busy(void) ++static int wait_pciephy_busy(void) +{ + unsigned long reg_value = 0x0, retry = 0; + + while (1) { -+ //reg_value = rareg(READMODE, PCIEPHY0_CFG, 0); + reg_value = pcie_r32(PCIEPHY0_CFG); + + if (reg_value & BUSY) @@ -169,10 +161,14 @@ Signed-off-by: John Crispin + u8 func = PCI_FUNC(devfn); + u32 address; + u32 data; ++ u32 num = 0; ++ ++ if (bus) ++ num = bus->number; + -+ address = (((where & 0xF00) >> 8) << 24) | (bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000; ++ address = (((where & 0xF00) >> 8) << 24) | (num << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000; + bridge_w32(address, RALINK_PCI_CONFIG_ADDR); -+ data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRTUAL_REG); ++ data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRT_REG); + + switch (size) { + case 1: @@ -195,10 +191,14 @@ Signed-off-by: John Crispin + u8 func = PCI_FUNC(devfn); + u32 address; + u32 data; ++ u32 num = 0; + -+ address = (((where & 0xF00) >> 8) << 24) | (bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000; ++ if (bus) ++ num = bus->number; ++ ++ address = (((where & 0xF00) >> 8) << 24) | (num << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000; + bridge_w32(address, RALINK_PCI_CONFIG_ADDR); -+ data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRTUAL_REG); ++ data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRT_REG); + + switch (size) { + case 1: @@ -214,69 +214,39 @@ Signed-off-by: John Crispin + break; + } + -+ bridge_w32(data, RALINK_PCI_CONFIG_DATA_VIRTUAL_REG); ++ bridge_w32(data, RALINK_PCI_CONFIG_DATA_VIRT_REG); + + return PCIBIOS_SUCCESSFUL; +} + -+struct pci_ops mt7620a_pci_ops= { ++struct pci_ops mt7620_pci_ops= { + .read = pci_config_read, + .write = pci_config_write, +}; + -+static struct resource mt7620a_res_pci_mem1 = { -+ .name = "pci memory", -+ .start = RALINK_PCI_MM_MAP_BASE, -+ .end = (u32) ((RALINK_PCI_MM_MAP_BASE + (unsigned char *)0x0fffffff)), -+ .flags = IORESOURCE_MEM, -+}; -+static struct resource mt7620a_res_pci_io1 = { -+ .name = "pci io", -+ .start = RALINK_PCI_IO_MAP_BASE, -+ .end = (u32) ((RALINK_PCI_IO_MAP_BASE + (unsigned char *)0x0ffff)), -+ .flags = IORESOURCE_IO, -+}; -+ -+struct pci_controller mt7620a_controller = { -+ .pci_ops = &mt7620a_pci_ops, -+ .mem_resource = &mt7620a_res_pci_mem1, -+ .io_resource = &mt7620a_res_pci_io1, ++static struct resource mt7620_res_pci_mem1; ++static struct resource mt7620_res_pci_io1; ++struct pci_controller mt7620_controller = { ++ .pci_ops = &mt7620_pci_ops, ++ .mem_resource = &mt7620_res_pci_mem1, + .mem_offset = 0x00000000UL, ++ .io_resource = &mt7620_res_pci_io1, + .io_offset = 0x00000000UL, + .io_map_base = 0xa0000000, +}; + -+static int mt7620a_pci_probe(struct platform_device *pdev) -+{ -+ struct resource *bridge_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ struct resource *pcie_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); -+ -+ rstpcie0 = devm_reset_control_get(&pdev->dev, "pcie0"); -+ if (IS_ERR(rstpcie0)) -+ return PTR_ERR(rstpcie0); -+ -+ bridge_base = devm_request_and_ioremap(&pdev->dev, bridge_res); -+ if (!bridge_base) -+ return -ENOMEM; -+ -+ pcie_base = devm_request_and_ioremap(&pdev->dev, pcie_res); -+ if (!pcie_base) -+ return -ENOMEM; -+ -+ iomem_resource.start = 0; -+ iomem_resource.end= ~0; -+ ioport_resource.start= 0; -+ ioport_resource.end = ~0; -+ ++static int mt7620_pci_hw_init(struct platform_device *pdev) { + /* PCIE: bypass PCIe DLL */ + pcie_phy(0x0, 0x80); + pcie_phy(0x1, 0x04); ++ + /* PCIE: Elastic buffer control */ + pcie_phy(0x68, 0xB4); + + reset_control_assert(rstpcie0); ++ + rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1); -+ rt_sysc_m32(1<<19, 1<<31, PPLL_DRV); ++ rt_sysc_m32(BIT(19), BIT(31), PPLL_DRV); + rt_sysc_m32(0x3 << 16, 0, RALINK_GPIOMODE); + + reset_control_deassert(rstpcie0); @@ -284,13 +254,13 @@ Signed-off-by: John Crispin + + mdelay(100); + -+ if (!(rt_sysc_r32(PPLL_CFG1) & 1<<23)) { -+ printk("MT7620 PPLL unlock\n"); ++ if (!(rt_sysc_r32(PPLL_CFG1) & BIT(23))) { ++ dev_err(&pdev->dev, "MT7620 PPLL unlock\n"); + reset_control_assert(rstpcie0); -+ rt_sysc_m32(BIT(26), 0, RALINK_CLKCFG1); -+ return 0; ++ rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1); ++ return -1; + } -+ rt_sysc_m32((0x1<<18) | (0x1<<17), (0x1 << 19) | (0x1 << 31), PPLL_DRV); ++ rt_sysc_m32(BIT(18) | BIT(17), BIT(19) | BIT(31), PPLL_DRV); + + mdelay(100); + reset_control_assert(rstpcie0); @@ -299,39 +269,111 @@ Signed-off-by: John Crispin + rt_sysc_m32(~0x7fffffff, 0x80000000, RALINK_PCIE_CLK_GEN); + rt_sysc_m32(~0x80ffffff, 0xa << 24, RALINK_PCIE_CLK_GEN1); + -+ mdelay(50); ++ return 0; ++} ++ ++static int mt7628_pci_hw_init(struct platform_device *pdev) { ++ u32 val = 0; ++ ++ rt_sysc_m32(BIT(16), 0, RALINK_GPIOMODE); + reset_control_deassert(rstpcie0); ++ rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1); ++ mdelay(100); ++ ++ pcie_m32(~0xff, 0x5, RALINK_PCIEPHY_P0_CTL_OFFSET); ++ ++ pci_config_read(NULL, 0, 0x70c, 4, &val); ++ val &= ~(0xff) << 8; ++ val |= 0x50 << 8; ++ pci_config_write(NULL, 0, 0x70c, 4, val); ++ ++ pci_config_read(NULL, 0, 0x70c, 4, &val); ++ dev_err(&pdev->dev, "Port 0 N_FTS = %x\n", (unsigned int) val); ++ ++ return 0; ++} ++ ++static int mt7620_pci_probe(struct platform_device *pdev) ++{ ++ struct resource *bridge_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ struct resource *pcie_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); ++ u32 val = 0; ++ ++ rstpcie0 = devm_reset_control_get(&pdev->dev, "pcie0"); ++ if (IS_ERR(rstpcie0)) ++ return PTR_ERR(rstpcie0); ++ ++ bridge_base = devm_request_and_ioremap(&pdev->dev, bridge_res); ++ if (!bridge_base) ++ return -ENOMEM; ++ ++ pcie_base = devm_request_and_ioremap(&pdev->dev, pcie_res); ++ if (!pcie_base) ++ return -ENOMEM; ++ ++ iomem_resource.start = 0; ++ iomem_resource.end = ~0; ++ ioport_resource.start = 0; ++ ioport_resource.end = ~0; ++ ++ /* bring up the pci core */ ++ switch (mt762x_soc) { ++ case MT762X_SOC_MT7620A: ++ if (mt7620_pci_hw_init(pdev)) ++ return -1; ++ break; ++ ++ case MT762X_SOC_MT7628AN: ++ if (mt7628_pci_hw_init(pdev)) ++ return -1; ++ break; ++ ++ default: ++ dev_err(&pdev->dev, "pcie is not supported on this hardware\n"); ++ return -1; ++ } ++ mdelay(50); ++ ++ /* enable write access */ + pcie_m32(BIT(1), 0, RALINK_PCI_PCICFG_ADDR); + mdelay(100); + -+ if (( pcie_r32(RALINK_PCI0_STATUS) & 0x1) == 0) { ++ /* check if there is a card present */ ++ if ((pcie_r32(RALINK_PCI0_STATUS) & 0x1) == 0) { + reset_control_assert(rstpcie0); + rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1); -+ rt_sysc_m32(LC_CKDRVPD_, PDRV_SW_SET, PPLL_DRV); -+ printk("PCIE0 no card, disable it(RST&CLK)\n"); ++ if (mt762x_soc == MT762X_SOC_MT7620A) ++ rt_sysc_m32(LC_CKDRVPD_, PDRV_SW_SET, PPLL_DRV); ++ dev_err(&pdev->dev, "PCIE0 no card, disable it(RST&CLK)\n"); ++ return -1; + } + ++ /* setup ranges */ + bridge_w32(0xffffffff, RALINK_PCI_MEMBASE); + bridge_w32(RALINK_PCI_IO_MAP_BASE, RALINK_PCI_IOBASE); + -+ pcie_w32(0x7FFF0000, RALINK_PCI0_BAR0SETUP_ADDR); ++ pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR); + pcie_w32(MEMORY_BASE, RALINK_PCI0_IMBASEBAR0_ADDR); -+ pcie_w32(0x08021814, RALINK_PCI0_ID); + pcie_w32(0x06040001, RALINK_PCI0_CLASS); -+ pcie_w32(0x28801814, RALINK_PCI0_SUBID); ++ ++ /* enable interrupts */ + pcie_m32(0, BIT(20), RALINK_PCI_PCIMSK_ADDR); + -+ register_pci_controller(&mt7620a_controller); ++ /* voodoo from the SDK driver */ ++ pci_config_read(NULL, 0, 4, 4, &val); ++ pci_config_write(NULL, 0, 4, 4, val | 0x7); ++ ++ pci_load_of_ranges(&mt7620_controller, pdev->dev.of_node); ++ register_pci_controller(&mt7620_controller); + + return 0; +} + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ -+ const struct resource *res; + u16 cmd; + u32 val; -+ int i, irq = 0; ++ int irq = 0; + + if ((dev->bus->number == 0) && (slot == 0)) { + pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR); //open 7FFF:2G; ENABLE @@ -340,14 +382,10 @@ Signed-off-by: John Crispin + } else if ((dev->bus->number == 1) && (slot == 0x0)) { + irq = RALINK_INT_PCIE0; + } else { -+ printk("bus=0x%x, slot = 0x%x\n", dev->bus->number, slot); ++ dev_err(&dev->dev, "no irq found - bus=0x%x, slot = 0x%x\n", dev->bus->number, slot); + return 0; + } + -+ for (i = 0; i < 6; i++) { -+ res = &dev->resource[i]; -+ } -+ + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14); //configure cache line size 0x14 + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xFF); //configure latency timer 0x10 + pci_read_config_word(dev, PCI_COMMAND, &cmd); @@ -366,27 +404,27 @@ Signed-off-by: John Crispin + return 0; +} + -+static const struct of_device_id mt7620a_pci_ids[] = { -+ { .compatible = "ralink,mt7620a-pci" }, ++static const struct of_device_id mt7620_pci_ids[] = { ++ { .compatible = "mediatek,mt7620-pci" }, + {}, +}; -+MODULE_DEVICE_TABLE(of, mt7620a_pci_ids); ++MODULE_DEVICE_TABLE(of, mt7620_pci_ids); + -+static struct platform_driver mt7620a_pci_driver = { -+ .probe = mt7620a_pci_probe, ++static struct platform_driver mt7620_pci_driver = { ++ .probe = mt7620_pci_probe, + .driver = { -+ .name = "mt7620a-pci", ++ .name = "mt7620-pci", + .owner = THIS_MODULE, -+ .of_match_table = of_match_ptr(mt7620a_pci_ids), ++ .of_match_table = of_match_ptr(mt7620_pci_ids), + }, +}; + -+static int __init mt7620a_pci_init(void) ++static int __init mt7620_pci_init(void) +{ -+ return platform_driver_register(&mt7620a_pci_driver); ++ return platform_driver_register(&mt7620_pci_driver); +} + -+arch_initcall(mt7620a_pci_init); ++arch_initcall(mt7620_pci_init); --- a/arch/mips/ralink/Kconfig +++ b/arch/mips/ralink/Kconfig @@ -39,6 +39,7 @@ choice @@ -397,3 +435,13 @@ Signed-off-by: John Crispin config SOC_MT7621 bool "MT7621" +--- a/arch/mips/include/asm/mach-ralink/mt7620.h ++++ b/arch/mips/include/asm/mach-ralink/mt7620.h +@@ -19,6 +19,7 @@ enum mt762x_soc_type { + MT762X_SOC_MT7620N, + MT762X_SOC_MT7628AN, + }; ++extern enum mt762x_soc_type mt762x_soc; + + #define MT7620_SYSC_BASE 0x10000000 +