From: Mike Frysinger Date: Wed, 2 Jun 2010 08:34:49 +0000 (-0400) Subject: Blackfin: unify custom gpio commands X-Git-Tag: v2010.09-rc1~82^2~3^2~26 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=c5530555f82f6fbaf51656e9ba10e295d3c5f195;p=oweals%2Fu-boot.git Blackfin: unify custom gpio commands Now that we have a unified gpio layer, the misc partial gpio commands can be unified and made complete (support all possible gpios). Signed-off-by: Mike Frysinger --- diff --git a/arch/blackfin/cpu/Makefile b/arch/blackfin/cpu/Makefile index 91797c798f..b7f991dea0 100644 --- a/arch/blackfin/cpu/Makefile +++ b/arch/blackfin/cpu/Makefile @@ -18,6 +18,7 @@ CEXTRA := initcode.o SEXTRA := start.o SOBJS := interrupt.o cache.o COBJS-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount.o +COBJS-$(CONFIG_CMD_GPIO) += cmd_gpio.o COBJS-y += cpu.o COBJS-y += gpio.o COBJS-y += interrupts.o diff --git a/arch/blackfin/cpu/cmd_gpio.c b/arch/blackfin/cpu/cmd_gpio.c new file mode 100644 index 0000000000..9e505b6617 --- /dev/null +++ b/arch/blackfin/cpu/cmd_gpio.c @@ -0,0 +1,120 @@ +/* + * Control GPIO pins on the fly + * + * Copyright (c) 2008-2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include +#include + +#include +#include + +enum { + GPIO_INPUT, + GPIO_SET, + GPIO_CLEAR, + GPIO_TOGGLE, +}; + +int do_gpio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + if (argc == 2 && !strcmp(argv[1], "status")) { + bfin_gpio_labels(); + return 0; + } + + if (argc != 3) { + show_usage: + printf("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + /* parse the behavior */ + ulong sub_cmd; + switch (argv[1][0]) { + case 'i': sub_cmd = GPIO_INPUT; break; + case 's': sub_cmd = GPIO_SET; break; + case 'c': sub_cmd = GPIO_CLEAR; break; + case 't': sub_cmd = GPIO_TOGGLE; break; + default: goto show_usage; + } + + /* parse the pin with format: [p][port]<#> */ + const char *str_pin = argv[2]; + + /* grab the [p] portion */ + ulong port_base; + if (*str_pin == 'p') ++str_pin; + switch (*str_pin) { +#ifdef GPIO_PA0 + case 'a': port_base = GPIO_PA0; break; +#endif +#ifdef GPIO_PB0 + case 'b': port_base = GPIO_PB0; break; +#endif +#ifdef GPIO_PC0 + case 'c': port_base = GPIO_PC0; break; +#endif +#ifdef GPIO_PD0 + case 'd': port_base = GPIO_PD0; break; +#endif +#ifdef GPIO_PE0 + case 'e': port_base = GPIO_PE0; break; +#endif +#ifdef GPIO_PF0 + case 'f': port_base = GPIO_PF0; break; +#endif +#ifdef GPIO_PG0 + case 'g': port_base = GPIO_PG0; break; +#endif +#ifdef GPIO_PH0 + case 'h': port_base = GPIO_PH0; break; +#endif +#ifdef GPIO_PI0 + case 'i': port_base = GPIO_PI0; break; +#endif +#ifdef GPIO_PJ + case 'j': port_base = GPIO_PJ0; break; +#endif + default: goto show_usage; + } + + /* grab the <#> portion */ + ulong pin = simple_strtoul(str_pin + 1, NULL, 10); + if (pin > 15) + goto show_usage; + + /* grab the pin before we tweak it */ + ulong gpio = port_base + pin; + gpio_request(gpio, "cmd_gpio"); + + /* finally, let's do it: set direction and exec command */ + if (sub_cmd == GPIO_INPUT) { + gpio_direction_input(gpio); + printf("gpio: pin %lu on port %c set to input\n", pin, *str_pin); + return 0; + } + + ulong value; + switch (sub_cmd) { + case GPIO_SET: value = 1; break; + case GPIO_CLEAR: value = 0; break; + case GPIO_TOGGLE: value = !gpio_get_value(gpio); break; + default: goto show_usage; + } + gpio_direction_output(gpio, value); + printf("gpio: pin %lu on port %c (gpio %lu) value is %lu\n", + pin, *str_pin, gpio, value); + + gpio_free(gpio); + + return 0; +} + +U_BOOT_CMD(gpio, 3, 0, do_gpio, + "set/clear/toggle gpio output pins", + " \n" + " - set/clear/toggle the specified pin (e.g. PF10)"); diff --git a/board/bf537-stamp/Makefile b/board/bf537-stamp/Makefile index 0e15062ba8..4f8985b2ac 100644 --- a/board/bf537-stamp/Makefile +++ b/board/bf537-stamp/Makefile @@ -29,7 +29,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS-y := $(BOARD).o cmd_bf537led.o +COBJS-y := $(BOARD).o COBJS-$(CONFIG_BFIN_IDE) += ide-cf.o COBJS-$(CONFIG_POST) += post.o post-memory.o diff --git a/board/bf537-stamp/cmd_bf537led.c b/board/bf537-stamp/cmd_bf537led.c deleted file mode 100644 index 7d8f3eadff..0000000000 --- a/board/bf537-stamp/cmd_bf537led.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * U-boot - cmd_bf537led.c - * - * Copyright (C) 2006 Aaron Gage, Ocean Optics Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include -#include -#include -#include -#include -#ifdef CONFIG_BF537_STAMP_LEDCMD - -/* Define the command usage in a reusable way */ -#define USAGE_LONG \ - "led \n" \ - " - Index (0-5) of LED to change, or \"all\"\n" \ - " - Must be one of:\n" \ - " on off toggle" - -/* Number of LEDs supported by the board */ -#define NUMBER_LEDS 6 -/* The BF537 stamp has 6 LEDs. This mask indicates that all should be lit. */ -#define LED_ALL_MASK 0x003F - -void show_cmd_usage(void); -void set_led_state(int index, int state); -void configure_GPIO_to_output(int index); - -/* Map of LEDs according to their GPIO ports. This can be rearranged or - * otherwise changed to account for different GPIO configurations. - */ -int led_ports[] = { PF6, PF7, PF8, PF9, PF10, PF11 }; - -#define ACTION_TOGGLE -1 -#define ACTION_OFF 0 -#define ACTION_ON 1 - -#define LED_STATE_OFF 0 -#define LED_STATE_ON 1 - -/* This is a trivial atoi implementation since we don't have one available */ -int atoi(char *string) -{ - int length; - int retval = 0; - int i; - int sign = 1; - - length = strlen(string); - for (i = 0; i < length; i++) { - if (0 == i && string[0] == '-') { - sign = -1; - continue; - } - if (string[i] > '9' || string[i] < '0') { - break; - } - retval *= 10; - retval += string[i] - '0'; - } - retval *= sign; - return retval; -} - -int do_bf537led(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - int led_mask = 0; - int led_current_state = 0; - int action = ACTION_OFF; - int temp; - - if (3 != argc) { - /* Not enough arguments, so just show usage information */ - show_cmd_usage(); - return 1; - } - - if (strcmp(argv[1], "all") == 0) { - led_mask = LED_ALL_MASK; - } else { - temp = atoi(argv[1]); - if (temp < 0 || temp >= NUMBER_LEDS) { - printf("Invalid LED number [%s]\n", argv[1]); - show_cmd_usage(); - return 2; - } - led_mask |= (1 << temp); - } - - if (strcmp(argv[2], "off") == 0) { - action = ACTION_OFF; - } else if (strcmp(argv[2], "on") == 0) { - action = ACTION_ON; - } else if (strcmp(argv[2], "toggle") == 0) { - action = ACTION_TOGGLE; - } else { - printf("Invalid action [%s]\n", argv[2]); - show_cmd_usage(); - return 3; - } - - for (temp = 0; temp < NUMBER_LEDS; temp++) { - if ((led_mask & (1 << temp)) > 0) { - /* - * It is possible that the user has wired one of PF6-PF11 to - * something other than an LED, so this will only change a pin - * to output if the user has indicated a state change. This may - * happen a lot, but this way is safer than just setting all pins - * to output. - */ - configure_GPIO_to_output(temp); - - led_current_state = - ((*pPORTFIO & led_ports[temp]) > - 0) ? LED_STATE_ON : LED_STATE_OFF; - /* - printf("LED state for index %d (%x) is %d\n", temp, led_ports[temp], - led_current_state); - printf("*pPORTFIO is %x\n", *pPORTFIO); - */ - if (ACTION_ON == action - || (ACTION_TOGGLE == action - && 0 == led_current_state)) { - printf("Turning LED %d on\n", temp); - set_led_state(temp, LED_STATE_ON); - } else { - printf("Turning LED %d off\n", temp); - set_led_state(temp, LED_STATE_OFF); - } - } - } - - return 0; -} - -/* - * The GPIO pins that go to the LEDs on the BF537 stamp must be configured - * as output. This function simply configures them that way. This could - * be done to all of the GPIO lines at once, but if a user is using a - * custom board, this will try to be nice and only change the GPIO lines - * that the user specifically names. - */ -void configure_GPIO_to_output(int index) -{ - int port; - - port = led_ports[index]; - - /* Clear the Port F Function Enable Register */ - *pPORTF_FER &= ~port; - /* Set the Port F I/O direction register */ - *pPORTFIO_DIR |= port; - /* Clear the Port F I/O Input Enable Register */ - *pPORTFIO_INEN &= ~port; -} - -/* Enforce the given state on the GPIO line for the indicated LED */ -void set_led_state(int index, int state) -{ - int port; - - port = led_ports[index]; - - if (LED_STATE_OFF == state) { - /* Clear the bit to turn off the LED */ - *pPORTFIO &= ~port; - } else { - /* Set the bit to turn on the LED */ - *pPORTFIO |= port; - } -} - -/* Display usage information */ -void show_cmd_usage() -{ - printf("Usage:\n%s\n", USAGE_LONG); -} - -/* Register information for u-boot to find this command */ -U_BOOT_CMD(led, 3, 1, do_bf537led, - "Control BF537 stamp LEDs", USAGE_LONG); - -#endif diff --git a/board/cm-bf527/Makefile b/board/cm-bf527/Makefile index c2cd244cf2..bad018aa34 100644 --- a/board/cm-bf527/Makefile +++ b/board/cm-bf527/Makefile @@ -29,7 +29,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS-y := $(BOARD).o gpio.o gpio_cfi_flash.o +COBJS-y := $(BOARD).o gpio_cfi_flash.o SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/cm-bf527/gpio.c b/board/cm-bf527/gpio.c deleted file mode 100644 index 7e0babe891..0000000000 --- a/board/cm-bf527/gpio.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * Control GPIO pins on the fly - * - * Copyright (c) 2008 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include -#include - -#include - -int do_gpio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - if (argc != 3) { - show_usage: - printf("Usage:\n%s\n", cmdtp->usage); - return 1; - } - - /* parse the behavior */ - ulong port_cmd = 0; - switch (argv[1][0]) { - case 'i': break; - case 's': port_cmd = (PORTFIO_SET - PORTFIO); break; - case 'c': port_cmd = (PORTFIO_CLEAR - PORTFIO); break; - case 't': port_cmd = (PORTFIO_TOGGLE - PORTFIO); break; - default: goto show_usage; - } - - /* parse the pin with format: [p]<#> */ - const char *str_pin = argv[2]; - - /* grab the [p] portion */ - ulong port_base; - if (*str_pin == 'p') ++str_pin; - switch (*str_pin) { - case 'f': port_base = PORTFIO; break; - case 'g': port_base = PORTGIO; break; - case 'h': port_base = PORTHIO; break; - default: goto show_usage; - } - - /* grab the <#> portion */ - ulong pin = simple_strtoul(str_pin+1, NULL, 10); - ulong pin_mask = (1 << pin); - if (pin > 15) - goto show_usage; - - /* finally, let's do it: set direction and exec command */ - switch (*str_pin) { - case 'f': bfin_write_PORTF_FER(bfin_read_PORTF_FER() & ~pin_mask); break; - case 'g': bfin_write_PORTG_FER(bfin_read_PORTG_FER() & ~pin_mask); break; - case 'h': bfin_write_PORTH_FER(bfin_read_PORTH_FER() & ~pin_mask); break; - } - - ulong port_dir = port_base + (PORTFIO_DIR - PORTFIO); - if (argv[1][0] == 'i') - bfin_write16(port_dir, bfin_read16(port_dir) & ~pin_mask); - else { - bfin_write16(port_dir, bfin_read16(port_dir) | pin_mask); - bfin_write16(port_base + port_cmd, pin_mask); - } - - printf("gpio: pin %li on port %c has been %c\n", pin, *str_pin, argv[1][0]); - - return 0; -} - -U_BOOT_CMD(gpio, 3, 0, do_gpio, - "gpio - set/clear/toggle gpio output pins\n", - " \n" - " - set/clear/toggle the specified pin\n"); diff --git a/board/cm-bf537e/Makefile b/board/cm-bf537e/Makefile index 3812ba1e72..bad018aa34 100644 --- a/board/cm-bf537e/Makefile +++ b/board/cm-bf537e/Makefile @@ -29,7 +29,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS-y := $(BOARD).o flash.o gpio_cfi_flash.o +COBJS-y := $(BOARD).o gpio_cfi_flash.o SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/cm-bf537e/flash.c b/board/cm-bf537e/flash.c deleted file mode 100644 index a4c1ec06cb..0000000000 --- a/board/cm-bf537e/flash.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * flash.c - helper commands for working with GPIO-assisted flash - * - * Copyright (c) 2005-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include -#include -#include -#include "gpio_cfi_flash.h" - -int do_pf(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - ulong faddr = CONFIG_SYS_FLASH_BASE; - ushort data; - ulong dflg; - - if (argc > 1) { - dflg = simple_strtoul(argv[1], NULL, 16); - faddr |= (dflg << 21); - gpio_cfi_flash_swizzle((void *)faddr); - } else { - data = bfin_read_PORTFIO(); - printf("Port F data %04x (PF4:%i)\n", data, !!(data & PF4)); - } - - return 0; -} - -U_BOOT_CMD(pf, 3, 0, do_pf, - "set/clear PF4 GPIO flash bank switch\n", - " - set PF4 GPIO pin state\n"); diff --git a/board/cm-bf537u/Makefile b/board/cm-bf537u/Makefile index 3812ba1e72..bad018aa34 100644 --- a/board/cm-bf537u/Makefile +++ b/board/cm-bf537u/Makefile @@ -29,7 +29,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS-y := $(BOARD).o flash.o gpio_cfi_flash.o +COBJS-y := $(BOARD).o gpio_cfi_flash.o SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/cm-bf537u/flash.c b/board/cm-bf537u/flash.c deleted file mode 100644 index 52abe790ab..0000000000 --- a/board/cm-bf537u/flash.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * flash.c - helper commands for working with GPIO-assisted flash - * - * Copyright (c) 2005-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include -#include -#include -#include "gpio_cfi_flash.h" - -int do_ph(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - ulong faddr = CONFIG_SYS_FLASH_BASE; - ushort data; - ulong dflg; - - if (argc > 1) { - dflg = simple_strtoul(argv[1], NULL, 16); - faddr |= (dflg << 21); - gpio_cfi_flash_swizzle((void *)faddr); - } else { - data = bfin_read_PORTHIO(); - printf("Port H data %04x (PH0:%i)\n", data, !!(data & PH0)); - } - - return 0; -} - -U_BOOT_CMD(ph, 3, 0, do_ph, - "set/clear PH0 GPIO flash bank switch\n", - " - set PH0 GPIO pin state\n"); diff --git a/board/tcm-bf537/Makefile b/board/tcm-bf537/Makefile index 3812ba1e72..bad018aa34 100644 --- a/board/tcm-bf537/Makefile +++ b/board/tcm-bf537/Makefile @@ -29,7 +29,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS-y := $(BOARD).o flash.o gpio_cfi_flash.o +COBJS-y := $(BOARD).o gpio_cfi_flash.o SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/tcm-bf537/flash.c b/board/tcm-bf537/flash.c deleted file mode 100644 index 14055c6177..0000000000 --- a/board/tcm-bf537/flash.c +++ /dev/null @@ -1,37 +0,0 @@ -/* - * flash.c - helper commands for working with GPIO-assisted flash - * - * Copyright (c) 2005-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include -#include -#include -#include "gpio_cfi_flash.h" - -int do_pf(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - ulong faddr = CONFIG_SYS_FLASH_BASE; - ushort data; - ulong dflg; - - if (argc == 3) { - dflg = simple_strtoul(argv[1], NULL, 16); - faddr |= (dflg << 21); - dflg = simple_strtoul(argv[2], NULL, 16); - faddr |= (dflg << 22); - gpio_cfi_flash_swizzle((void *)faddr); - } else { - data = bfin_read_PORTFIO(); - printf("Port F data %04x (PF4:%i PF5:%i)\n", data, - !!(data & PF4), !!(data & PF5)); - } - - return 0; -} - -U_BOOT_CMD(pf, 3, 0, do_pf, - "set/clear PF4/PF5 GPIO flash bank switch\n", - " - set PF4/PF5 GPIO pin state\n"); diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index 92ceb3815b..cba4ac0548 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -268,8 +268,6 @@ #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 -/* #define CONFIG_BF537_STAMP_LEDCMD 1 */ - /* Define if want to do post memory test */ #undef CONFIG_POST #ifdef CONFIG_POST diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h index 1896cf53d5..fa1e69486f 100644 --- a/include/configs/bfin_adi_common.h +++ b/include/configs/bfin_adi_common.h @@ -83,6 +83,7 @@ # define CONFIG_CMD_CPLBINFO # define CONFIG_CMD_ELF # define CONFIG_ELF_SIMPLE_LOAD +# define CONFIG_CMD_GPIO # define CONFIG_CMD_KGDB # define CONFIG_CMD_REGINFO # define CONFIG_CMD_STRINGS