From: Philippe Reynes Date: Fri, 3 May 2019 17:43:06 +0000 (+0200) Subject: watchdog: bcm6345: callback start use tick instead of ms X-Git-Tag: v2019.07-rc3~22^2~15 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=c411adbdd0f2ff0e1dd35342c843edd3afa7c15b;p=oweals%2Fu-boot.git watchdog: bcm6345: callback start use tick instead of ms The function bcm6345_wdt_start use the argument timeout as tick but it should be used as milliseconds. A clock is added as requirement for this driver. The frequency of the clock is then used to convert the millisecond to ticks in the function bcm6345_wdt_start. Signed-off-by: Philippe Reynes Reviewed-by: Stefan Roese --- diff --git a/drivers/watchdog/bcm6345_wdt.c b/drivers/watchdog/bcm6345_wdt.c index 44f5662038..9f14e7d777 100644 --- a/drivers/watchdog/bcm6345_wdt.c +++ b/drivers/watchdog/bcm6345_wdt.c @@ -10,6 +10,7 @@ #include #include #include +#include #include /* WDT Value register */ @@ -26,6 +27,7 @@ struct bcm6345_wdt_priv { void __iomem *regs; + unsigned long clk_rate; }; static int bcm6345_wdt_reset(struct udevice *dev) @@ -41,16 +43,17 @@ static int bcm6345_wdt_reset(struct udevice *dev) static int bcm6345_wdt_start(struct udevice *dev, u64 timeout, ulong flags) { struct bcm6345_wdt_priv *priv = dev_get_priv(dev); + u32 val = priv->clk_rate / 1000 * timeout; - if (timeout < WDT_VAL_MIN) { + if (val < WDT_VAL_MIN) { debug("watchdog won't fire with less than 2 ticks\n"); - timeout = WDT_VAL_MIN; - } else if (timeout > WDT_VAL_MAX) { + val = WDT_VAL_MIN; + } else if (val > WDT_VAL_MAX) { debug("maximum watchdog timeout exceeded\n"); - timeout = WDT_VAL_MAX; + val = WDT_VAL_MAX; } - writel(timeout, priv->regs + WDT_VAL_REG); + writel(val, priv->regs + WDT_VAL_REG); return bcm6345_wdt_reset(dev); } @@ -85,11 +88,19 @@ static const struct udevice_id bcm6345_wdt_ids[] = { static int bcm6345_wdt_probe(struct udevice *dev) { struct bcm6345_wdt_priv *priv = dev_get_priv(dev); + struct clk clk; + int ret; priv->regs = dev_remap_addr(dev); if (!priv->regs) return -EINVAL; + ret = clk_get_by_index(dev, 0, &clk); + if (!ret) + priv->clk_rate = clk_get_rate(&clk); + else + return -EINVAL; + bcm6345_wdt_stop(dev); return 0;