From: Yangbo Lu Date: Thu, 19 Dec 2019 10:59:27 +0000 (+0800) Subject: powerpc/mpc85xx: drop eSDHC periperhal clock code X-Git-Tag: v2020.04-rc1~18^2~5 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=c2a8b4f879e89a158fc1f9fbcf9d78b2ad4cefde;p=oweals%2Fu-boot.git powerpc/mpc85xx: drop eSDHC periperhal clock code The below patch added eSDHC periperhal clock code initially. 2d9ca2c mmc: fsl_esdhc: Add peripheral clock support The purpose was to fix up device tree properties "peripheral-frequency" so that linux could get the periperhal clock by it. However the implementation on both u-boot and linux was only for a Freescale SDK release. The linux part implementation had never been upstreamed. These code should not have been exist on u-boot mainline. Let's remove the powerpc part changes but keep the changes in fsl_esdhc driver. The changes in fsl_esdhc driver could be utilized to support SD UHS and eMMC HS200/HS400 speed modes for current Layerscape ARM platforms. Signed-off-by: Yangbo Lu --- diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index 15b05fcc51..0c5252edc2 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -69,8 +69,7 @@ void get_sys_info(sys_info_t *sys_info) [14] = 4, /* CC4 PPL / 4 */ }; uint i, freq_c_pll[CONFIG_SYS_FSL_NUM_CC_PLLS]; -#if !defined(CONFIG_FM_PLAT_CLK_DIV) || !defined(CONFIG_PME_PLAT_CLK_DIV) || \ - defined(CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK) +#if !defined(CONFIG_FM_PLAT_CLK_DIV) || !defined(CONFIG_PME_PLAT_CLK_DIV) uint rcw_tmp; #endif uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS]; @@ -450,48 +449,6 @@ void get_sys_info(sys_info_t *sys_info) #endif #endif -#ifdef CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK -#if defined(CONFIG_ARCH_T2080) -#define ESDHC_CLK_SEL 0x00000007 -#define ESDHC_CLK_SHIFT 0 -#define ESDHC_CLK_RCWSR 15 -#else /* Support T1040 T1024 by now */ -#define ESDHC_CLK_SEL 0xe0000000 -#define ESDHC_CLK_SHIFT 29 -#define ESDHC_CLK_RCWSR 7 -#endif - rcw_tmp = in_be32(&gur->rcwsr[ESDHC_CLK_RCWSR]); - switch ((rcw_tmp & ESDHC_CLK_SEL) >> ESDHC_CLK_SHIFT) { - case 1: - sys_info->freq_sdhc = freq_c_pll[CONFIG_SYS_SDHC_CLK]; - break; - case 2: - sys_info->freq_sdhc = freq_c_pll[CONFIG_SYS_SDHC_CLK] / 2; - break; - case 3: - sys_info->freq_sdhc = freq_c_pll[CONFIG_SYS_SDHC_CLK] / 3; - break; -#if defined(CONFIG_SYS_SDHC_CLK_2_PLL) - case 4: - sys_info->freq_sdhc = freq_c_pll[CONFIG_SYS_SDHC_CLK] / 4; - break; -#if defined(CONFIG_ARCH_T2080) - case 5: - sys_info->freq_sdhc = freq_c_pll[1 - CONFIG_SYS_SDHC_CLK]; - break; -#endif - case 6: - sys_info->freq_sdhc = freq_c_pll[1 - CONFIG_SYS_SDHC_CLK] / 2; - break; - case 7: - sys_info->freq_sdhc = freq_c_pll[1 - CONFIG_SYS_SDHC_CLK] / 3; - break; -#endif - default: - sys_info->freq_sdhc = 0; - printf("Error: Unknown SDHC peripheral clock select!\n"); - } -#endif #else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) { @@ -673,15 +630,11 @@ int get_clocks (void) gd->arch.i2c2_clk = gd->arch.i2c1_clk; #if defined(CONFIG_FSL_ESDHC) -#ifdef CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK - gd->arch.sdhc_clk = sys_info.freq_sdhc / 2; -#else #if defined(CONFIG_ARCH_MPC8569) || defined(CONFIG_ARCH_P1010) gd->arch.sdhc_clk = gd->bus_clk; #else gd->arch.sdhc_clk = gd->bus_clk / 2; #endif -#endif #endif /* defined(CONFIG_FSL_ESDHC) */ #if defined(CONFIG_CPM2) diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 946e74a93b..4ca1e2b325 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -331,9 +331,6 @@ #define CONFIG_SYS_FMAN_V3 #define CONFIG_FM_PLAT_CLK_DIV 1 #define CONFIG_SYS_FM1_CLK CONFIG_FM_PLAT_CLK_DIV -#define CONFIG_SYS_SDHC_CLK 0/* Select SDHC CLK begining from PLL1 - per rcw field value */ -#define CONFIG_SYS_SDHC_CLK_2_PLL /* Select SDHC CLK from 2 PLLs */ #define CONFIG_SYS_FM_MURAM_SIZE 0x30000 #define CONFIG_SYS_FSL_SINGLE_SOURCE_CLK #define CONFIG_SYS_FSL_TBCLK_DIV 16 @@ -362,8 +359,6 @@ #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 #define CONFIG_SYS_FM1_CLK 0 -#define CONFIG_SYS_SDHC_CLK 0/* Select SDHC CLK begining from PLL1 - per rcw field value */ #define CONFIG_QBMAN_CLK_DIV 1 #define CONFIG_SYS_FM_MURAM_SIZE 0x30000 #define CONFIG_SYS_FSL_SINGLE_SOURCE_CLK @@ -402,9 +397,6 @@ #define CONFIG_PME_PLAT_CLK_DIV 1 #define CONFIG_SYS_PME_CLK CONFIG_PME_PLAT_CLK_DIV #define CONFIG_SYS_FM1_CLK 0 -#define CONFIG_SYS_SDHC_CLK 1/* Select SDHC CLK begining from PLL2 - per rcw field value */ -#define CONFIG_SYS_SDHC_CLK_2_PLL /* Select SDHC CLK from 2 PLLs */ #define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 #define CONFIG_SYS_FMAN_V3 #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index b8456984e2..aa2a8b00de 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -481,7 +481,6 @@ unsigned long get_board_ddr_clk(void); #endif #ifdef CONFIG_MMC -#define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR #define CONFIG_FSL_ESDHC_ADAPTER_IDENT #endif diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index 2078b9d369..be5a658d7e 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -630,7 +630,6 @@ unsigned long get_board_ddr_clk(void); * SDHC */ #ifdef CONFIG_MMC -#define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 diff --git a/include/e500.h b/include/e500.h index 1acf7784df..255f46bf1e 100644 --- a/include/e500.h +++ b/include/e500.h @@ -18,7 +18,6 @@ typedef struct unsigned long freq_ddrbus; unsigned long freq_localbus; unsigned long freq_qe; - unsigned long freq_sdhc; #ifdef CONFIG_SYS_DPAA_FMAN unsigned long freq_fman[CONFIG_SYS_NUM_FMAN]; #endif diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index cd154738a4..95c0ccc9d3 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -3777,8 +3777,6 @@ CONFIG_SYS_SCRATCH_VA CONFIG_SYS_SCSI_MAX_DEVICE CONFIG_SYS_SCSI_MAX_LUN CONFIG_SYS_SCSI_MAX_SCSI_ID -CONFIG_SYS_SDHC_CLK -CONFIG_SYS_SDHC_CLK_2_PLL CONFIG_SYS_SDIO0 CONFIG_SYS_SDIO0_MAX_CLK CONFIG_SYS_SDIO1