From: John Crispin Date: Wed, 12 Nov 2014 14:55:00 +0000 (+0000) Subject: ralink: fix up dts for mt7621 eval board X-Git-Tag: reboot~5375 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=bfcdc8711cc437f836fa529183e35c0e845da4fc;p=oweals%2Fopenwrt.git ralink: fix up dts for mt7621 eval board Signed-off-by: John Crispin SVN-Revision: 43238 --- diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index a53a032b7d..c5957b393a 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -115,6 +115,7 @@ ramips_setup_interfaces() dir-320-b1 | \ dir-615-h1 | \ hlk-rm04 | \ + mt7621 | \ mt7628 | \ mzk-w300nh2 | \ mzk-750dhp | \ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 7538876697..fcb8fdcf0b 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -355,6 +355,9 @@ ramips_board_detect() { *"Lenovo Y1S") name="y1s" ;; + *"Mediatek MT7621 evaluation board") + name="mt7621" + ;; *"Mediatek MT7628AN evaluation board") name="mt7628" ;; diff --git a/target/linux/ramips/dts/MT7621.dts b/target/linux/ramips/dts/MT7621.dts index 834f59c401..7c7f159f01 100644 --- a/target/linux/ramips/dts/MT7621.dts +++ b/target/linux/ramips/dts/MT7621.dts @@ -3,8 +3,8 @@ /include/ "mt7621.dtsi" / { - compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc"; - model = "Ralink MT7621 evaluation board"; + compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc"; + model = "Mediatek MT7621 evaluation board"; memory@0 { reg = <0x0 0x2000000>; diff --git a/target/linux/ramips/dts/mt7621.dtsi b/target/linux/ramips/dts/mt7621.dtsi index e00ddd2c0a..859749cce4 100644 --- a/target/linux/ramips/dts/mt7621.dtsi +++ b/target/linux/ramips/dts/mt7621.dtsi @@ -1,7 +1,7 @@ / { #address-cells = <1>; #size-cells = <1>; - compatible = "ralink,mtk7620a-soc"; + compatible = "mediatek,mtk7621-soc"; cpus { cpu@0 { @@ -201,28 +201,9 @@ #address-cells = <1>; #size-cells = <0>; - ralink,port-map = "llllw"; - interrupt-parent = <&gic>; interrupts = <3>; -/* resets = <&rstctrl 21 &rstctrl 23>; - reset-names = "fe", "esw"; - - port@4 { - compatible = "ralink,mt7620a-gsw-port", "ralink,eth-port"; - reg = <4>; - - status = "disabled"; - }; - - port@5 { - compatible = "ralink,mt7620a-gsw-port", "ralink,eth-port"; - reg = <5>; - - status = "disabled"; - }; -*/ mdio-bus { #address-cells = <1>; #size-cells = <0>; @@ -230,9 +211,6 @@ phy1f: ethernet-phy@1f { reg = <0x1f>; phy-mode = "rgmii"; - - interrupt-parent = <&gic>; - interrupts = <23>; }; }; }; @@ -240,6 +218,7 @@ gsw@1e110000 { compatible = "ralink,mt7620a-gsw"; reg = <0x1e110000 8000>; - + interrupt-parent = <&gic>; + interrupts = <23>; }; };