From: Igor Opaniuk Date: Mon, 10 Jun 2019 11:47:50 +0000 (+0300) Subject: video: fsl_dcu_fb: add DM_VIDEO support X-Git-Tag: v2019.10-rc1~5^2~15 X-Git-Url: https://git.librecmc.org/?a=commitdiff_plain;h=be3f1a56bf87bef19ac9e129ab8f20ab960f310e;p=oweals%2Fu-boot.git video: fsl_dcu_fb: add DM_VIDEO support Extend the driver to build with DM_VIDEO enabled. DTS files must additionally include 'u-boot,dm-pre-reloc' property in soc and child nodes to enable driver binding to fsl_dcu_fb device. Currently display timings aren't obtained from DT. Signed-off-by: Igor Opaniuk Reviewed-by: Oleksandr Suvorov --- diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c index 9d63fbf3bd..dad754b31f 100644 --- a/board/toradex/colibri_vf/colibri_vf.c +++ b/board/toradex/colibri_vf/colibri_vf.c @@ -430,7 +430,9 @@ int checkboard(void) #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) int ft_board_setup(void *blob, bd_t *bd) { +#ifndef CONFIG_DM_VIDEO int ret = 0; +#endif #ifdef CONFIG_FDT_FIXUP_PARTITIONS static const struct node_info nodes[] = { { "fsl,vf610-nfc", MTD_DEV_TYPE_NAND, }, /* NAND flash */ @@ -440,7 +442,7 @@ int ft_board_setup(void *blob, bd_t *bd) puts(" Updating MTD partitions...\n"); fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes)); #endif -#ifdef CONFIG_VIDEO_FSL_DCU_FB +#if defined(CONFIG_VIDEO_FSL_DCU_FB) && !defined(CONFIG_DM_VIDEO) ret = fsl_dcu_fixedfb_setup(blob); if (ret) return ret; diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index c3781b160d..261fa98517 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -484,7 +484,7 @@ config VIDEO_IVYBRIDGE_IGD config VIDEO_FSL_DCU_FB bool "Enable Freescale Display Control Unit" - depends on VIDEO + depends on VIDEO || DM_VIDEO help This enables support for Freescale Display Control Unit (DCU4) module found on Freescale Vybrid and QorIQ family of SoCs. diff --git a/drivers/video/fsl_dcu_fb.c b/drivers/video/fsl_dcu_fb.c index f789ec597d..add64b85b5 100644 --- a/drivers/video/fsl_dcu_fb.c +++ b/drivers/video/fsl_dcu_fb.c @@ -8,10 +8,12 @@ #include #include +#include #include #include #include #include +#include #include #include "videomodes.h" @@ -219,8 +221,6 @@ struct dcu_reg { u32 ctrldescl[DCU_LAYER_MAX_NUM][16]; }; -static struct fb_info info; - static void reset_total_layers(void) { struct dcu_reg *regs = (struct dcu_reg *)CONFIG_SYS_DCU_ADDR; @@ -302,7 +302,11 @@ int fsl_dcu_init(struct fb_info *fbinfo, unsigned int xres, { struct dcu_reg *regs = (struct dcu_reg *)CONFIG_SYS_DCU_ADDR; unsigned int div, mode; - +/* + * When DM_VIDEO is enabled reservation of framebuffer is done + * in advance during bind() call. + */ +#if !CONFIG_IS_ENABLED(DM_VIDEO) fbinfo->screen_size = fbinfo->var.xres * fbinfo->var.yres * (fbinfo->var.bits_per_pixel / 8); @@ -310,13 +314,13 @@ int fsl_dcu_init(struct fb_info *fbinfo, unsigned int xres, fbinfo->screen_size = 0; return -ENOMEM; } - /* Reserve framebuffer at the end of memory */ gd->fb_base = gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size - fbinfo->screen_size; fbinfo->screen_base = (char *)gd->fb_base; memset(fbinfo->screen_base, 0, fbinfo->screen_size); +#endif reset_total_layers(); @@ -429,6 +433,32 @@ int fsl_probe_common(struct fb_info *fbinfo, unsigned int *win_x, options + 8, fsl_dcu_mode_db); } +#ifndef CONFIG_DM_VIDEO +static struct fb_info info; + +#if defined(CONFIG_OF_BOARD_SETUP) +int fsl_dcu_fixedfb_setup(void *blob) +{ + u64 start, size; + int ret; + + start = gd->bd->bi_dram[0].start; + size = gd->bd->bi_dram[0].size - info.screen_size; + + /* + * Align size on section size (1 MiB). + */ + size &= 0xfff00000; + ret = fdt_fixup_memory_banks(blob, &start, &size, 1); + if (ret) { + eprintf("Cannot setup fb: Error reserving memory\n"); + return ret; + } + + return 0; +} +#endif + void *video_hw_init(void) { static GraphicDevice ctfb; @@ -448,25 +478,69 @@ void *video_hw_init(void) return &ctfb; } -#if defined(CONFIG_OF_BOARD_SETUP) -int fsl_dcu_fixedfb_setup(void *blob) +#else /* ifndef CONFIG_DM_VIDEO */ + +static int fsl_dcu_video_probe(struct udevice *dev) { - u64 start, size; - int ret; + struct video_uc_platdata *plat = dev_get_uclass_platdata(dev); + struct video_priv *uc_priv = dev_get_uclass_priv(dev); + struct fb_info fbinfo = { 0 }; + unsigned int win_x; + unsigned int win_y; + u32 fb_start, fb_end; + int ret = 0; + + fb_start = plat->base & ~(MMU_SECTION_SIZE - 1); + fb_end = plat->base + plat->size; + fb_end = ALIGN(fb_end, 1 << MMU_SECTION_SHIFT); + + fbinfo.screen_base = (char *)fb_start; + fbinfo.screen_size = plat->size; + + ret = fsl_probe_common(&fbinfo, &win_x, &win_y); + if (ret < 0) + return ret; - start = gd->bd->bi_dram[0].start; - size = gd->bd->bi_dram[0].size - info.screen_size; + uc_priv->bpix = VIDEO_BPP32; + uc_priv->xsize = win_x; + uc_priv->ysize = win_y; - /* - * Align size on section size (1 MiB). - */ - size &= 0xfff00000; - ret = fdt_fixup_memory_banks(blob, &start, &size, 1); - if (ret) { - eprintf("Cannot setup fb: Error reserving memory\n"); + /* Enable dcache for the frame buffer */ + mmu_set_region_dcache_behaviour(fb_start, fb_end - fb_start, + DCACHE_WRITEBACK); + video_set_flush_dcache(dev, true); + return ret; +} + +static int fsl_dcu_video_bind(struct udevice *dev) +{ + struct video_uc_platdata *plat = dev_get_uclass_platdata(dev); + unsigned int win_x; + unsigned int win_y; + unsigned int depth = 0, freq = 0; + const char *options; + int ret = 0; + + ret = video_get_video_mode(&win_x, &win_y, &depth, &freq, &options); + if (ret < 0) return ret; - } + + plat->size = win_x * win_y * 32; return 0; } -#endif + +static const struct udevice_id fsl_dcu_video_ids[] = { + { .compatible = "fsl,vf610-dcu" }, + { /* sentinel */ } +}; + +U_BOOT_DRIVER(fsl_dcu_video) = { + .name = "fsl_dcu_video", + .id = UCLASS_VIDEO, + .of_match = fsl_dcu_video_ids, + .bind = fsl_dcu_video_bind, + .probe = fsl_dcu_video_probe, + .flags = DM_FLAG_PRE_RELOC, +}; +#endif /* ifndef CONFIG_DM_VIDEO */